The R Project SVN – R – /trunk/src/gnuwin32/Makefile

include MkRules

## This is done so Rpwd.exe gets built first under a native build,
## but it is not used in Makefile under a cross-build.
ifneq ($(strip $(BUILD)),CROSS)
ifneq ($(strip $(wildcard Rpwd.exe)),)
all: Rpwd.exe rbuild rpackage rdocs
else
all: Rpwd.exe
    $(MAKE) rbuild rpackage rdocs
endif
else
all: Rpwd.exe rbuild rpackage rdocs
endif

PACKAGES = base ctest eda lqs methods modreg mva nls splines stepfun tools ts
ALLPACKAGES = $(PACKAGES) tcltk

## must be absolute and space-free paths
ifneq ($(strip $(BUILD)),CROSS)
RHOME = $(shell ./Rpwd.exe ../..)
PKGD = $(shell ./Rpwd.exe $(PKGDIR))
else
RHOME = $(shell perl pwd.pl ../..)
PKGD = $(shell perl pwd.pl $(PKGDIR))
endif

RPREFIX = $(shell perl fixed/rwver.pl ../../VERSION)

RLIB = $(RHOME)/library
PKGDIR = $(RHOME)/src/library

OPTFLAGS=-O2 -Wall -pedantic
## use FOPTFLAGS where complex*16 is used.
FOPTFLAGS=-O2 -Wall
ifdef DEBUG
 OPTFLAGS+=-g
 FOPTFLAGS+=-g
 DLLFLAGS=
else
 DLLFLAGS=-s
endif

R-DLLFLAGS = -mwindows -Wl,--allow-multiple-definition
R-DLLLIBS =-L. $(FLIBS) -lRblas -lcomctl32 -lversion
SOURCES = $(filter-out malloc.c blas00.c,$(wildcard *.c *.f))
OBJS = $(SOURCES:.c=.o)
MAINLIBS = libmain.a libappl.a libmath.a
EXTRALIBS = ga.a gl.a xdr.a ../extra/zlib/libz.a ../extra/pcre/libRpcre.a\
   ../extra/bzip2/libbz2.a

LIBFILES = $(foreach i, $(ALLPACKAGES), ../../library/$i) ../../library/R.css
PKGS = $(foreach i,$(PACKAGES),pkg-$i)
PKGCLEAN = $(foreach i,$(ALLPACKAGES),pkgclean-$i)

# flags to ensure that Doug Lea's malloc is used:
ifdef LEA_MALLOC
extra-CFLAGS+=-DLEA_MALLOC
OBJS-EXTRA=malloc.o
endif

.PHONY:  clean veryclean  rlibs fixfiles front-ends rmodules


# separate as Tcl/Tk headers are needed.
tcl: 
    @$(MAKE) --no-print-directory pkg-tcltk

CFLAGS = $(OPTFLAGS) -I../include -I. -DHAVE_CONFIG_H -DR_DLL_BUILD
FFLAGS = $(FOPTFLAGS)

Rpwd.exe: front-ends/Rpwd.exe
    $(CP) $< $@

front-ends/Rpwd.exe:
    $(MAKE) --no-print-directory -C front-ends Rpwd

## watch out: R.dll and Rblas.dll depend on each other.
rbuild: fixfiles rlibs makeMakedeps libRblas.a ../../bin/R.dll libR.a \
     ../../bin/Rblas.dll CHTML front-ends COPYRIGHTS rmodules Rcode

## used to build skeletal versions of packages, enough to run
## package tools to install them properly
INITPACKAGES = base tools
Rcode: fixed/fixdesc 
    @$(ECHO) "  making bootstrap versions of packages ..."
    @for pkg in $(INITPACKAGES); do \
      if ! test -f $(RHOME)/library/$${pkg}/DESCRIPTION ; then \
      $(ECHO) "  --" $$pkg; \
      $(MAKE) --no-print-directory -C $(PKGDIR)/$${pkg} PKG=$${pkg} \
        RHOME=$(RHOME) -f $(RHOME)/src/gnuwin32/MakePkg Rcode; \
      fi; \
    done
    @$(ECHO) "  ... done"


rpackage: ../../library/R.css
    @$(MAKE) --no-print-directory $(PKGS)

rinstaller:
    $(MAKE) --no-print-directory -C installer
    @$(MAKE) --no-print-directory -C installer clean

rlibs:
    $(MAKE) --no-print-directory -C ../appl  OPTFLAGS='$(OPTFLAGS)' -f Makefile.win
    $(MAKE) --no-print-directory -C ../main  OPTFLAGS='$(OPTFLAGS)' -f Makefile.win
    $(MAKE) --no-print-directory -C ../nmath OPTFLAGS='$(OPTFLAGS)' -f Makefile.win
    $(MAKE) --no-print-directory -C ./graphapp
    $(MAKE) --no-print-directory -C ./getline
    $(MAKE) --no-print-directory -C ../extra/xdr -f Makefile.win

rmodules: libRm.a
    $(MAKE) --no-print-directory -C ../modules \
      OPTFLAGS='$(OPTFLAGS)' FOPTFLAGS='$(FOPTFLAGS)' -f Makefile.win

COPYRIGHTS: $(RHOME)/COPYRIGHTS COPYRIGHTS.win
    cat $^ > $@


fixfiles: docfiles
    @$(MKDIR) -p ../../bin
    @$(MAKE) --no-print-directory -C ./fixed

fixed/fixdesc:
    @sh fixed/GETDESC $(ALLPACKAGES)

dllversion.o: ../include/Rversion.h

R.dll: R.a $(OBJS-EXTRA) $(MAINLIBS) $(EXTRALIBS) dllversion.o

Rdll: makeMakedeps ../../bin/R.dll

../../bin/R.dll: fixfiles rlibs R.dll
    @$(MKDIR) -p ../../bin
    $(CP) R.dll ../../bin/

front-ends: libR.a
    $(MAKE) --no-print-directory -C front-ends

R.a: $(OBJS)
    @$(ECHO) -------- Building $@ --------
    $(AR) cr R.a $^
    $(RANLIB) R.a


# R.dll exports all global symbols BUT import library (libR.a)
# only (all functions) + (global vars listed in exported-vars))

libR.a:  R.exp
    $(DLLTOOL) $(DLLTOOLFLAGS) $(R-DLLTOOLFLAGS) --dllname R.dll --def R.exp --output-lib libR.a

R.exp: R.exp1
    @(diff R.exp R.exp1 > /dev/null) || $(CP) R.exp1 R.exp

R.exp1: R.a $(MAINLIBS) $(EXTRALIBS) exported-vars
    @$(ECHO) EXPORTS > $@
    @$(NM) R.a $(MAINLIBS) $(EXTRALIBS) > RDefs
    @$(SED) -n '/^........ [T] _/s/^........ [T] _/ /p' RDefs >> $@
    @$(CAT) exported-vars >> $@
    @$(RM) RDefs

# An additional import library needed for the modules that uses R.dll's malloc/.../free
libRm.a:  Rm.exp
    $(DLLTOOL) $(DLLTOOLFLAGS) $(R-DLLTOOLFLAGS) --dllname R.dll --def Rm.exp --output-lib libRm.a

Rm.exp: Rm.exp1
    @(diff Rm.exp Rm.exp1 > /dev/null) || $(CP) Rm.exp1 Rm.exp

Rm.exp1: $(OBJS-EXTRA)
    @$(ECHO) EXPORTS > $@
    @$(NM) $(OBJS-EXTRA) > RDefs
    @$(SED) -n '/^........ [T] _/s/^........ [T] _/ /p' RDefs >> $@
    @$(RM) RDefs

../../library/R.css: ../../doc/html/R.css
    $(CP) $< $@

../extra/zlib/libz.a:
    $(MAKE) --no-print-directory -C ../extra/zlib -f Makefile.win

../extra/pcre/libRpcre.a:
    $(MAKE) --no-print-directory -C ../extra/pcre -f Makefile.win

../extra/bzip2/libbz2.a:
    $(MAKE) --no-print-directory -C ../extra/bzip2  -f Makefile.win libbz2.a

rdocs:
    @$(ECHO)
    @$(ECHO) "------ Making HTML documentation ------"
    @$(MAKE) --no-print-directory -C ../../doc/manual -f Makefile.win html BUILD=$(BUILD)


#                          ===== BLAS ======

Rblas: ../../bin/Rblas.dll

Rblas-clean:
    $(RM) ../../bin/Rblas.dll blas00.o blas00.d blas.o cmplxblas.o

Rblas-DLLLIBS=-L. -lR

libRblas.a:  Rblas.def
    $(DLLTOOL) $(DLLTOOLFLAGS) $(R-DLLTOOLFLAGS) --dllname Rblas.dll \
      --def Rblas.def --output-lib libRblas.a

ifeq ($(strip $(USE_ATLAS)),YES)
../../bin/Rblas.dll: blas00.o dllversion.o
    @$(ECHO) -------- Building $@ --------
    $(DLL) -shared $(DLLFLAGS) -o $@ $^ Rblas.def -L $(ATLAS_PATH) \
       -L. -lR -lg2c -lf77blas -latlas
## suppress lots of warnings: this is a dummy
blas00.o: blas00.c
    $(CC) -O2  -c $< -o $@
else
../../bin/Rblas.dll: blas.o cmplxblas.o dllversion.o
    @$(ECHO) -------- Building $@ --------
    $(DLL) -shared $(DLLFLAGS) -o $@ Rblas.def $^ -L. -lR

blas.o: ../appl/blas.f
    $(F77) $(FFLAGS) -c $< -o $@
cmplxblas.o: ../modules/lapack/cmplxblas.f
    $(F77) $(FOPTFLAGS) -c $< -o $@
endif


#                          ===== Packages ======

CHTML:
ifeq ($(strip $(HELP)),YES)
ifeq ($(strip $(WINHELP)),CHM)
    $(MAKE) --no-print-directory -C ./help -f MkChmDll
endif
ifeq ($(strip $(WINHELP)),BOTH)
    $(MAKE) --no-print-directory -C ./help -f MkChmDll
endif
endif

base-HELP = ziponly
methods-HELP = ziponly
nls-HELP = ziponly
ts-HELP = ziponly
base-ZIPDATA = zip
ts-ZIPDATA = zip

MASS-HELP = ziponly
MASS-ZIPDATA = zip
boot-HELP = ziponly
boot-ZIPDATA = zip
cluster-HELP = ziponly
cluster-ZIPDATA = zip
grid-HELP = ziponly
grid-ZIPDATA = zip
lattice-HELP = ziponly
lattice-ZIPDATA = zip
nlme-HELP = ziponly
nlme-ZIPDATA = zip
rpart-HELP = ziponly
rpart-ZIPDATA = zip
survival-HELP = ziponly
survival-ZIPDATA = zip

bundle-%:
    @$(PERL) fixed/dobundle.pl $* $(PKGD) $(RLIB)

pkg-%:
    @$(MAKE) --no-print-directory DLLNM=$($*-DLLNM)  FLIBS="$(FLIBS)" BUILD=$(BUILD) \
      -C $(PKGDIR)/$* PKG=$* RHOME=$(RHOME) RLIB=$(RLIB) RVER=$(RVER) \
      -f $(RHOME)/src/gnuwin32/MakePkg
    @if test -d $(RLIB)/$*/data ; then \
      $(MAKE) --no-print-directory $($*-ZIPDATA)data-$* ; \
    fi
ifeq ($(strip $(HELP)),YES)
    @$(ECHO) "  installing help"
    @$(MAKE) --no-print-directory -C ./help RHOME=$(RHOME) PKGDIR=$(PKGD) RLIB=$(RLIB) $($*-HELP)help-$*
ifeq ($(strip $(WINHELP)),CHM)
    @$(MAKE) --no-print-directory -C ./help RHOME=$(RHOME) PKGDIR=$(PKGD) RLIB=$(RLIB) chm-$*
endif
ifeq ($(strip $(WINHELP)),BOTH)
    @$(MAKE) --no-print-directory -C ./help RHOME=$(RHOME) PKGDIR=$(PKGD) RLIB=$(RLIB) winhlp-$* # also makes chm
endif
endif
    @$(MAKE) --no-print-directory BUILD=$(BUILD) \
      -C $(PKGDIR)/$* PKG=$* RHOME=$(RHOME) RLIB=$(RLIB)  \
      -f $(RHOME)/src/gnuwin32/MakePkg md5sums

pkgclean-%:
    $(MAKE) --no-print-directory DLLNM=$($*-DLLNM) RHOME=$(RHOME) BUILD=$(BUILD) \
      -C $(PKGDIR)/$* PKG=$* -f $(RHOME)/src/gnuwin32/MakePkg clean

pkgcheck-%:
    @$(ECHO) -------- Testing package $* --------
    -@$(MKDIR) -p $(PKGDIR)/$*/check
    @$(MAKE) --no-print-directory -C $(PKGDIR)/$*/check PKG=$* RHOME=$(RHOME) RLIB=$(RLIB) \
      -f $(RHOME)/src/gnuwin32/check/PkgCheck
    @if test -d $(PKGDIR)/$*/tests ; then \
      $(MAKE) --no-print-directory -C $(PKGDIR)/$*/tests PKG=$* RHOME=$(RHOME) RLIB=$(RLIB) \
        -f $(RHOME)/src/gnuwin32/check/PkgCheck tests;\
    fi

ziphelp-%:
    $(MAKE) --no-print-directory -C ./help RHOME=$(RHOME) PKGDIR=$(PKGD) RLIB=$(RLIB) ziphelp-$*

ziponly-%:
    $(MAKE) --no-print-directory -C ./help RHOME=$(RHOME) PKGDIR=$(PKGD) RLIB=$(RLIB) ziponlyhelp-$*

zipdata-%:
    @$(ECHO) "  zipping data"
    @(cd $(RLIB)/$*/data; \
      if test -f Rdata.zip ; then \
        unzip -qou Rdata; \
      fi; \
      $(RM) Rdata.zip filelist ; \
      ls -1 > filelist; \
      zip -rmq9X Rdata * -x filelist 00Index)

data-%:
    @$(ECHO) "  not zipping data"


#                          ===== cleaning ======

clean: cleanwin $(PKGCLEAN)
    $(RM) -f ../*/*.o $(WINOBJS) *.a ../*/*.d ../*/Makedeps fixed/fixdesc
    -$(MAKE) --no-print-directory -C ../../doc/manual -f Makefile.win distclean
    -$(MAKE) --no-print-directory -C ../nmath/standalone -f Makefile.win distclean
    -$(MAKE) --no-print-directory -C ../modules -f Makefile.win clean
    -$(MAKE) --no-print-directory -C ../../tests -f Makefile.win clean
    $(RM) -f ../library/methods/R/methods
    for p in $(REC_PKGS); do \
      $(RM) -rf ../library/$$p; \
    done

distclean veryclean: clean clean-recommended
    $(RM) -r ../../bin ../../lib ../../library ../../modules
    $(RM) ../include/config.h ../include/psignal.h \
    ../include/Rconfig.h ../include/Rversion.h ../include/Rmath.h
    $(RM) ../library/*/src/*.o ../library/*/src/*.a
    $(RM) ../library/*/src/*.d ../library/*/src/Makedeps
    $(RM) ../library/*/src/*.dll
    $(RM) -r ../library/*/check
    $(RM) ../library/tcltk/src/tcl$(TCL_VERSION).def \
    ../library/tcltk//src/tk$(TCL_VERSION).def
    $(RM) R.exp Rm.exp COPYRIGHTS
    $(RM) ../../doc/html/search/index.txt ../../doc/html/index.html \
    ../../doc/html/packages.html ../../doc/html/rwin.html \
    ../../doc/html/rw-FAQ.html ../../doc/html/search/SearchEngine.html
    $(RM) ../../etc/Rconsole ../../etc/Rdevga ../../etc/Rprofile \
    ../../etc/rgb.txt ../../share/make/wintests.mk \
    ../include/Platform.h ../../tests/*.Rout ../../tests/*.Rout.fail
    $(MAKE) -C fixed distclean
    -$(MAKE) -C installer distclean
    @for pkg in $(ALLPACKAGES); do \
      $(RM) ../library/$${pkg}/DESCRIPTION; \
    done
    $(RM) rw-FAQ fixed/html/rw-FAQ.html
    $(RM) Rpwd.exe # do this last of all

cleanwin:
    $(RM) *.o *.dll *.a *~ \#*\# rw*.zip R.def R.exp1 Rm.exp1\
       .RData .Rhistory Makedeps *.d
    $(MAKE) -C graphapp clean
    $(MAKE) -C fixed clean
    $(MAKE) -C getline clean
    $(MAKE) -C help clean
    $(MAKE) -C front-ends clean
    $(MAKE) -C ../extra/xdr -f Makefile.win clean
    $(MAKE) -C ../extra/pcre -f Makefile.win distclean
    $(MAKE) -C ../extra/bzip2 -f Makefile.win clean
    $(MAKE) -C bitmap clean
    -$(MAKE) -C installer clean


#                          ===== testing ======

# tests
check test: pkgtests test-Basic

test-Basic:
    -@$(MAKE) --no-print-directory -C $(RHOME)/tests -f $(RHOME)/tests/Makefile.win clean
    -@$(MAKE) --no-print-directory -C $(RHOME)/tests -f $(RHOME)/tests/Makefile.win RHOME=$(RHOME)


PKGS-CHK = $(foreach i, $(PACKAGES), pkgcheck-$i)
pkgtests: $(PKGS-CHK)

fullcheck: check check-recommended

REC_PKGS-CHK = $(foreach i, $(REC_PKGS), pkgcheck-$i)
check-recommended: $(REC_PKGS-CHK)

#                          ===== documentation ======

docs manuals:
    @$(MAKE) --no-print-directory -C $(RHOME)/doc/manual -f Makefile.win clean BUILD=$(BUILD)
    @$(MAKE) --no-print-directory -C $(RHOME)/doc/manual -f Makefile.win \
      R_PKGS='$(ALLPACKAGES)' BUILD=$(BUILD)
    @$(MAKE) --no-print-directory ziponly-base


## ===================== Maintainer targets ========================

RVER = $(shell cut -d' ' -f1 ../../VERSION | sed -n 1p)

docfiles:
    $(MAKE) -f Makefile.docfiles

bitmapdll:
    $(MAKE) -C bitmap

distribution: bindist packagedist docsdist

bindist: tcl bitmapdll docfiles
    $(RM) -r $(RPREFIX)
    $(MKDIR) $(RPREFIX)
    $(CP) -pr ../../bin ../../modules ../../afm $(RPREFIX)
    $(MKDIR) $(RPREFIX)/library
    $(CP) -pr $(LIBFILES) $(RPREFIX)/library
# morley.tab is needed for R-intro Appendix A
    $(CP) -p ../library/base/data/morley.tab $(RPREFIX)/library/base/data
    $(RM) $(RPREFIX)/*/Makefile.in
    (cd $(RPREFIX)/bin; $(RM) INSTALL REMOVE SHLIB build check \
       massage-Examples Rd2dvi.sh Rd2txt Rdconv Rdiff.sh Rdindex \
           Sd2Rd)
    $(MKDIR) $(RPREFIX)/etc
    $(CP) -p ../../etc/Rprofile $(RPREFIX)/etc/Rprofile
    $(CP) -p ../../etc/Rconsole $(RPREFIX)/etc/Rconsole
    $(CP) -p ../../etc/Rdevga $(RPREFIX)/etc/Rdevga
    $(CP) -p ../../etc/rgb.txt $(RPREFIX)/etc/rgb.txt
    $(MKDIR) -p $(RPREFIX)/doc/manual  $(RPREFIX)/share/texmf
    $(CP) -pr ../../doc/html $(RPREFIX)/doc
    $(CP) -p ../../doc/manual/*.html $(RPREFIX)/doc/manual
    $(CP) -pr ../../share/texmf $(RPREFIX)/share
    $(CP) -p ../../AUTHORS ../../COPYING COPYRIGHTS ../../FAQ ../../NEWS \
        ../../README ../../RESOURCES ../../THANKS ../../Y2K $(RPREFIX)
    $(SED) -e s/@RWVER@/$(RPREFIX)/g \
      -e s/@RVER@/$(RVER)/g readme > $(RPREFIX)/README.$(RPREFIX)
    $(CP) -p rw-faq $(RPREFIX)/rw-FAQ
    $(CP) -p CHANGES README.Rterm $(RPREFIX)
    find $(RPREFIX) -name CVS -prune -exec rm -rf \{\} \;
# convert docs and batch files to CRLF: might already be on Windows, though.
ifeq ($(strip $(BUILD)),CROSS)
    zip -l dosfiles.zip $(RPREFIX)/* $(RPREFIX)/bin/*.bat
    unzip -ao dosfiles.zip
else
    zip dosfiles.zip $(RPREFIX)/* $(RPREFIX)/bin/*.bat
    unzip -o dosfiles.zip
endif
    $(RM) dosfiles.zip
    $(RM) $(RPREFIX)b.zip $(RPREFIX)m.zip $(RPREFIX)h.zip \
       $(RPREFIX)w.zip $(RPREFIX)l.zip $(RPREFIX)ch.zip
    $(RM) anindex.zip
    zip -mrX anindex.zip $(RPREFIX)/library/*/help/AnIndex
    zip -mr9X $(RPREFIX)h.zip $(RPREFIX)/library/*/help
    unzip anindex.zip
    $(RM) anindex.zip
    $(RM) $(RPREFIX)/doc/manual/R-FAQ.html
    zip -rm9X $(RPREFIX)w.zip $(RPREFIX)/doc/html \
          $(RPREFIX)/doc/manual/*.html \
      $(RPREFIX)/library/*/html $(RPREFIX)/library/R.css
    -zip -rm9X $(RPREFIX)ch.zip $(RPREFIX)/library/*/chtml \
      $(RPREFIX)/bin/Rchtml.dll
#   $(RM) $(RPREFIX)/library/*/winhlp/*.GID
#   -zip -rm9X $(RPREFIX)wh.zip $(RPREFIX)/library/*/winhlp
    zip -rm9X $(RPREFIX)l.zip $(RPREFIX)/library/*/latex $(RPREFIX)/share/texmf
    $(RM) -r $(RPREFIX)/doc
    $(MKDIR) -p  $(RPREFIX)/doc/html
    $(CP) -p ../../doc/html/faq.html ../../doc/html/rw-FAQ.html \
      $(RPREFIX)/doc/html
    zip -rm9X $(RPREFIX)m.zip $(RPREFIX)/library/*/man
    zip -r9X $(RPREFIX)b.zip $(RPREFIX)
    $(RM) -rf $(RPREFIX)


#taken from ../include/Makefile.in
SRC_HEADERS = R.h S.h Rdefines.h Rdevices.h Rgraphics.h Rinternals.h Rmath.h
OBJ_HEADERS = Rconfig.h Rversion.h
GW32_HEADERS =

packagedist:
    $(RM) -r $(RPREFIX)sp.zip $(RPREFIX)
    $(MKDIR) -p $(RPREFIX) $(RPREFIX)/bin $(RPREFIX)/etc \
      $(RPREFIX)/doc $(RPREFIX)/doc/html $(RPREFIX)/share \
      $(RPREFIX)/src/include $(RPREFIX)/src/library \
      $(RPREFIX)/src/gnuwin32/fixed
    $(CP) ../../doc/html/logo.jpg $(RPREFIX)/doc/html
    $(CP) ../../doc/KEYWORDS* $(RPREFIX)/doc
    $(CP) -p exported-vars R.exp Rblas.def MkRules MakePkg MakeDll \
      Rpwd.exe pwd.pl makeDllRes.pl install-save.sh $(RPREFIX)/src/gnuwin32
    $(SED) -e s/@RVER@/$(RVER)/g Makefile.packages > $(RPREFIX)/src/gnuwin32/Makefile
    $(CP) fixed/dobundle.pl $(RPREFIX)/src/gnuwin32/fixed
    $(CP) -pr help check $(RPREFIX)/src/gnuwin32
    $(RM) $(RPREFIX)/src/gnuwin32/help/*.c \
      $(RPREFIX)/src/gnuwin32/help/MkChmDll
    $(MAKE) --no-print-directory -C $(RPREFIX)/src/gnuwin32/help clean
    $(CP) -p $(foreach i,$(SRC_HEADERS) $(OBJ_HEADERS) $(GW32_HEADERS), \
      ../include/$i) $(RPREFIX)/src/include
    $(CP) -pr ../include/R_ext $(RPREFIX)/src/include
    $(SED) -e 3,5d readme.packages > $(RPREFIX)/readme.packages
    $(CP) ../../COPYING.LIB $(RPREFIX)
    $(CP) -r ../../share/make ../../share/perl ../../share/texmf \
       $(RPREFIX)/share
    $(CP) ../../bin/INSTALL ../../bin/REMOVE ../../bin/SHLIB \
      ../../bin/build ../../bin/check ../../bin/massage-Examples \
      ../../bin/Rd2dvi.sh ../../bin/Rd2txt ../../bin/Rdconv \
      ../../bin/Rdindex ../../bin/Rdiff.sh \
      ../../bin/Sd2Rd  \
          $(RPREFIX)/bin
    $(CP) -pr ../../lib $(RPREFIX)
    $(CP) ../../share/make/wintests.mk $(RPREFIX)/share/make
    $(CP) -pr ../../share/R $(RPREFIX)/share
    $(CP) -p graphapp/graphapp.h graphapp/ga.h $(RPREFIX)/src/include
    $(MAKE) --no-print-directory PKGDIR=. pkgclean-windlgs
    $(CP) -pr windlgs $(RPREFIX)/src/library
    find $(RPREFIX) -name CVS -prune -exec rm -rf \{\} \;
    zip -r9X $(RPREFIX)sp.zip $(RPREFIX)
    $(RM) -r $(RPREFIX)

docsdist: docs
    $(RM) -r $(RPREFIX)
    $(RM) -f $(RPREFIX)d1.zip $(RPREFIX)d2.zip
    $(MKDIR) $(RPREFIX) $(RPREFIX)/doc $(RPREFIX)/doc/manual
    $(CP) -pr $(RHOME)/doc/manual/*.pdf $(RPREFIX)/doc/manual
    zip -rm9X $(RPREFIX)d2.zip $(RPREFIX)/doc/manual/refman.pdf
    zip -rm9X $(RPREFIX)d1.zip $(RPREFIX)/doc/manual \
      -x $(RPREFIX)/doc/manual/R-FAQ.pdf
    $(RM) -r $(RPREFIX)

install:
    cp *.zip /pub/bdr/RWin/Rpre

CRANREC = cran.r-project.org::CRAN/src/contrib/$(RVER)/Recommended

rsync-recommended:
    @(cd ../library; \
    rsync -rvCt --delete --exclude=Makefile.in --exclude=.cvsignore \
      --include=*.tar.gz --exclude=*.tgz $(CRANREC) . ); \
    $(RM) ../library/Recommended/*.tgz; \
    (cd ../library/Recommended; for i in ${RECOMMENDED} ; do cp -p $${i}*.tar.gz $${i}.tgz ; done)

../library/%/DESCRIPTION: ../library/Recommended/%.tgz
    @$(ECHO) "---- $*"
    (cd ../library; rm -rf $*; tar zxf Recommended/$*.tgz; touch $@)

unpack-recommended:
    @$(ECHO) "--- Unpacking recommended packages"
    @for i in ${RECOMMENDED} ; do $(MAKE) -s --no-print-directory ../library/$$i/DESCRIPTION ; done

clean-recommended:
    @for i in ${RECOMMENDED} ; do $(RM) -r ../library/$${i} ; done

recommended: unpack-recommended
    @$(ECHO) "--- Making recommended packages"
    @$(MAKE) --no-print-directory bundle-VR
    @for p in $(REC_NONBUNDLES); do \
      $(MAKE) --no-print-directory pkg-$$p; \
    done

dist-recommended:
    @for p in $(REC_PKGS); do \
    (cd ../..; zip -r9X src/gnuwin32/Recommended.zip library/$$p) ; \
    done

## ============= End of maintainer targets ========================

# Dependencies
CSOURCES=$(filter-out malloc.c blas00.c,$(wildcard *.c))
DEPS=$(CSOURCES:.c=.d)

makeMakedeps: $(DEPS)
    @$(RM) Makedeps
    @cat $(DEPS) >> Makedeps

-include Makedeps
The R Project SVN R

(root)/trunk/src/gnuwin32/Makefile – Rev 23216
