The R Project SVN
R
(root)/branches/R-exp-R5/po/zh_TW.po – Rev 52864
Rev 52829 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed
# Traditional Chinese translations for R.# Copyright (C) 2005, 06 The R Foundation# This file is distributed under the same license as the R package.# 陈斐 <FeiChen@FairIsaac.com>, 2005.# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2005, 06.#msgid ""msgstr """Project-Id-Version: R 2.3.0\n""Report-Msgid-Bugs-To: bugs@R-project.org\n""POT-Creation-Date: 2010-08-30 08:38+0100\n""PO-Revision-Date: 2006-04-14 22:49+0800\n""Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n""Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n""MIME-Version: 1.0\n""Content-Type: text/plain; charset=UTF-8\n""Content-Transfer-Encoding: 8bit\n""Plural-Forms: nplurals=1; plural=0;\n"#: src/appl/binning.c:73msgid "NA's in .C(\"bincode\",... NAOK=FALSE)"msgstr ".C(\"bincode\",... NAOK=FALSE) 中有 NA 值"#: src/appl/binning.c:111msgid "NA's in .C(\"bincount\",... NAOK=FALSE)"msgstr ".C(\"bincount\",... NAOK=FALSE) 有 NA 值"#: src/appl/pretty.c:106msgid "Internal(pretty()): very small range.. corrected"msgstr "內部(pretty()): 範圍太小.. 已修正"#: src/appl/pretty.c:109msgid "Internal(pretty()): very large range.. corrected"msgstr "內部(pretty()): 範圍太大.. 已修正"#: src/appl/rcont.c:78#, c-formatmsgid "rcont2 [%d,%d]: exp underflow to 0; algorithm failure"msgstr "rcont2 [%d,%d]: exp 向下溢位到 0; 演算法失敗"#: src/appl/strsignif.c:120msgid ".C(..): Width cannot be zero"msgstr ".C(..): 寬度不能為零"#: src/appl/strsignif.c:134msgid ".C(..): 'type' must be \"integer\" for \"d\"-format"msgstr ".C(..):「type」如果用於 \"d\"-格式的話必須為 \"integer\""#: src/appl/strsignif.c:214msgid ".C(..): 'type' must be \"real\" for this format"msgstr ".C(..):「type」用於這種格式的話必須為 \"real\""#: src/gnuwin32/dynload.c:155#, c-formatmsgid "DLL attempted to change FPU control word from %x to %x"msgstr "DLL 試圖把 FPU 控制詞從 %x 改成 %x"#: src/gnuwin32/dynload.c:193msgid "cannot get working directory"msgstr "找不到工作目錄"#: src/gnuwin32/extra.c:65 src/gnuwin32/extra.c:594#, fuzzymsgid "unsupported version of Windows"msgstr "不支援這種轉換"#: src/gnuwin32/extra.c:129 src/gnuwin32/extra.c:151 src/gnuwin32/extra.c:185msgid "R_HOME not set"msgstr "沒有設定 R_HOME"#: src/gnuwin32/extra.c:134#, fuzzy, c-formatmsgid "'%s' not found"msgstr "沒找到"#: src/gnuwin32/extra.c:136#, fuzzy, c-formatmsgid "file association for '%s' not available or invalid"msgstr "本系統沒有檢查檔案修改時間此一功能"#: src/gnuwin32/extra.c:139#, c-formatmsgid "access to '%s' denied"msgstr ""#: src/gnuwin32/extra.c:140#, c-formatmsgid "problem in displaying '%s'"msgstr ""#: src/gnuwin32/extra.c:156#, fuzzy, c-formatmsgid "'%ls' not found"msgstr "沒找到"#: src/gnuwin32/extra.c:158#, fuzzy, c-formatmsgid "file association for '%ls' not available or invalid"msgstr "本系統沒有檢查檔案修改時間此一功能"#: src/gnuwin32/extra.c:161#, c-formatmsgid "access to '%ls' denied"msgstr ""#: src/gnuwin32/extra.c:162#, c-formatmsgid "problem in displaying '%ls'"msgstr ""#: src/gnuwin32/extra.c:173 src/gnuwin32/extra.c:204 src/gnuwin32/extra.c:229#: src/gnuwin32/extra.c:232 src/gnuwin32/extra.c:278 src/gnuwin32/extra.c:315#: src/gnuwin32/extra.c:326 src/gnuwin32/extra.c:350 src/gnuwin32/extra.c:358#: src/gnuwin32/extra.c:513 src/gnuwin32/extra.c:533 src/gnuwin32/extra.c:573#: src/gnuwin32/extra.c:758 src/gnuwin32/extra.c:842 src/gnuwin32/extra.c:845#: src/gnuwin32/extra.c:850 src/gnuwin32/extra.c:1596#: src/gnuwin32/extra.c:1621 src/main/agrep.c:67 src/main/agrep.c:70#: src/main/apply.c:257 src/main/apply.c:259 src/main/apply.c:262#: src/main/array.c:73 src/main/array.c:1064 src/main/array.c:1193#: src/main/array.c:1195 src/main/array.c:1196 src/main/attrib.c:192#: src/main/builtin.c:77 src/main/builtin.c:86 src/main/builtin.c:105#: src/main/builtin.c:107 src/main/builtin.c:136 src/main/builtin.c:500#: src/main/builtin.c:516 src/main/builtin.c:700 src/main/character.c:120#: src/main/character.c:123 src/main/character.c:176 src/main/character.c:1002#: src/main/character.c:1006 src/main/character.c:1237#: src/main/character.c:1241 src/main/character.c:1298#: src/main/character.c:1301 src/main/connections.c:954#: src/main/connections.c:960 src/main/connections.c:963#: src/main/connections.c:967 src/main/connections.c:1106#: src/main/connections.c:1122 src/main/connections.c:1127#: src/main/connections.c:1683 src/main/connections.c:1689#: src/main/connections.c:1693 src/main/connections.c:1697#: src/main/connections.c:1702 src/main/connections.c:2346#: src/main/connections.c:2351 src/main/connections.c:2354#: src/main/connections.c:2357 src/main/connections.c:2737#: src/main/connections.c:2742 src/main/connections.c:2748#: src/main/connections.c:2751 src/main/connections.c:2755#: src/main/connections.c:2770 src/main/connections.c:2821#: src/main/connections.c:2826 src/main/connections.c:2830#: src/main/connections.c:2834 src/main/connections.c:2838#: src/main/connections.c:2844 src/main/connections.c:2890#: src/main/connections.c:2896 src/main/connections.c:2900#: src/main/connections.c:2951 src/main/connections.c:2954#: src/main/connections.c:3214 src/main/connections.c:3217#: src/main/connections.c:3220 src/main/connections.c:3315#: src/main/connections.c:3321 src/main/connections.c:3324#: src/main/connections.c:3472 src/main/connections.c:3475#: src/main/connections.c:3479 src/main/connections.c:3482#: src/main/connections.c:3589 src/main/connections.c:3692#: src/main/connections.c:3695 src/main/connections.c:4028#: src/main/connections.c:4051 src/main/connections.c:4082#: src/main/connections.c:4096 src/main/connections.c:4104#: src/main/connections.c:4130 src/main/connections.c:4269#: src/main/connections.c:4273 src/main/connections.c:4399#: src/main/connections.c:4401 src/main/connections.c:4403#: src/main/connections.c:4435 src/main/connections.c:4565#: src/main/connections.c:4591 src/main/connections.c:4595#: src/main/connections.c:4599 src/main/connections.c:4603#: src/main/context.c:597 src/main/context.c:606 src/main/context.c:610#: src/main/datetime.c:656 src/main/datetime.c:736 src/main/datetime.c:738#: src/main/datetime.c:742 src/main/datetime.c:900 src/main/datetime.c:902#: src/main/datetime.c:1066 src/main/debug.c:223 src/main/deparse.c:351#: src/main/devices.c:581 src/main/dotcode.c:736 src/main/dotcode.c:740#: src/main/dotcode.c:745 src/main/dounzip.c:250 src/main/dounzip.c:257#: src/main/dounzip.c:267 src/main/dounzip.c:272 src/main/dounzip.c:276#: src/main/envir.c:1524 src/main/envir.c:1527 src/main/envir.c:1670#: src/main/envir.c:1675 src/main/envir.c:1741 src/main/envir.c:1757#: src/main/envir.c:1763 src/main/envir.c:1863 src/main/envir.c:1871#: src/main/envir.c:1878 src/main/envir.c:1892 src/main/envir.c:1898#: src/main/envir.c:1902 src/main/envir.c:2119 src/main/envir.c:2240#: src/main/envir.c:2499 src/main/envir.c:2757 src/main/envir.c:2771#: src/main/envir.c:2778 src/main/envir.c:2794 src/main/envir.c:3348#: src/main/eval.c:281 src/main/eval.c:1768 src/main/eval.c:1797#: src/main/eval.c:1801 src/main/grep.c:735 src/main/grep.c:740#: src/main/grep.c:1085 src/main/grep.c:1089 src/main/grep.c:1094#: src/main/grep.c:1769 src/main/grep.c:1774 src/main/memory.c:2984#: src/main/model.c:1610 src/main/model.c:1618 src/main/optim.c:225#: src/main/paste.c:86 src/main/paste.c:353 src/main/paste.c:360#: src/main/paste.c:367 src/main/paste.c:372 src/main/paste.c:377#: src/main/paste.c:382 src/main/paste.c:385 src/main/paste.c:393#: src/main/paste.c:542 src/main/paste.c:547 src/main/platform.c:282#: src/main/platform.c:284 src/main/platform.c:286 src/main/platform.c:302#: src/main/platform.c:313 src/main/platform.c:947 src/main/platform.c:953#: src/main/platform.c:1003 src/main/platform.c:1060 src/main/platform.c:1063#: src/main/platform.c:1223 src/main/platform.c:1226 src/main/platform.c:1262#: src/main/platform.c:1265 src/main/platform.c:1338 src/main/platform.c:1356#: src/main/platform.c:1397 src/main/platform.c:1399 src/main/platform.c:1459#: src/main/platform.c:1550 src/main/platform.c:1810 src/main/platform.c:1853#: src/main/platform.c:1974 src/main/platform.c:1977 src/main/platform.c:1980#: src/main/platform.c:1983 src/main/platform.c:2100 src/main/platform.c:2134#: src/main/platform.c:2182 src/main/plot.c:3113 src/main/plot.c:4252#: src/main/plot.c:4256 src/main/plot.c:4259 src/main/plot3d.c:2449#: src/main/plot3d.c:2453 src/main/plot3d.c:2458 src/main/plot3d.c:2462#: src/main/plot3d.c:2466 src/main/plot3d.c:2470 src/main/print.c:230#: src/main/print.c:236 src/main/print.c:258 src/main/print.c:264#: src/main/print.c:270 src/main/random.c:468 src/main/random.c:472#: src/main/random.c:476 src/main/saveload.c:1937 src/main/saveload.c:1940#: src/main/saveload.c:1943 src/main/saveload.c:2061 src/main/saveload.c:2229#: src/main/saveload.c:2234 src/main/saveload.c:2237 src/main/saveload.c:2341#: src/main/scan.c:660 src/main/scan.c:827 src/main/scan.c:840#: src/main/scan.c:844 src/main/scan.c:846 src/main/scan.c:857#: src/main/scan.c:884 src/main/scan.c:887 src/main/scan.c:940#: src/main/scan.c:977 src/main/scan.c:981 src/main/scan.c:991#: src/main/scan.c:1205 src/main/scan.c:1433 src/main/scan.c:1484#: src/main/scan.c:1496 src/main/scan.c:1500 src/main/scan.c:1506#: src/main/scan.c:1720 src/main/scan.c:1721 src/main/scan.c:1723#: src/main/scan.c:1724 src/main/scan.c:1725 src/main/scan.c:1726#: src/main/scan.c:1727 src/main/scan.c:1728 src/main/seq.c:381#: src/main/seq.c:385 src/main/seq.c:403 src/main/seq.c:407 src/main/seq.c:413#: src/main/seq.c:421 src/main/sort.c:161 src/main/sysutils.c:560#: src/main/sysutils.c:562 src/main/sysutils.c:564 src/main/sysutils.c:569#: src/main/sysutils.c:1518 src/main/sysutils.c:1522 src/main/unique.c:820#: src/main/unique.c:1099 src/main/unique.c:1159 src/main/unique.c:1166#: src/main/util.c:572 src/main/util.c:575 src/main/util.c:1685#: src/modules/internet/internet.c:283 src/modules/internet/internet.c:289#: src/modules/internet/internet.c:295 src/modules/internet/internet.c:298#: src/modules/internet/internet.c:302 src/modules/lapack/Lapack.c:153#: src/modules/lapack/Lapack.c:243 src/modules/lapack/Lapack.c:668#: src/modules/lapack/Lapack.c:764 src/modules/lapack/Lapack.c:821#: src/modules/lapack/Lapack.c:1079 src/modules/X11/devX11.c:2897#: src/modules/X11/devX11.c:2900 src/modules/X11/devX11.c:2903#: src/modules/X11/devX11.c:2928 src/modules/X11/devX11.c:3299#: src/modules/X11/devX11.c:3304 src/modules/X11/devX11.c:3308#: src/modules/X11/devX11.c:3312 src/modules/X11/devX11.c:3316#: src/modules/X11/devX11.c:3327 src/modules/X11/devX11.c:3331#: src/unix/sys-std.c:1201 src/unix/sys-std.c:1224#, c-formatmsgid "invalid '%s' argument"msgstr "'%s' 引數不正確"#: src/gnuwin32/extra.c:216msgid "unknown type"msgstr "不明的類型"#: src/gnuwin32/extra.c:250 src/gnuwin32/extra.c:274 src/gnuwin32/extra.c:312#: src/gnuwin32/extra.c:347msgid "Menu functions can only be used in the GUI"msgstr "選單功能只能在 GUI 中使用"#: src/gnuwin32/extra.c:282#, c-formatmsgid "unable to retrieve items for %s (%s)"msgstr "無法檢索項目 %s (%s)"#: src/gnuwin32/extra.c:320#, c-formatmsgid "unable to add menu (%s)"msgstr "無法增加選單 (%s)"#: src/gnuwin32/extra.c:332#, c-formatmsgid "unable to add menu item (%s)"msgstr "無法加入選單項 (%s)"#: src/gnuwin32/extra.c:355msgid "menu does not exist"msgstr "選單不存在"#: src/gnuwin32/extra.c:362#, c-formatmsgid "unable to delete menu item (%s)"msgstr "無法刪除選單項 (%s)"#: src/gnuwin32/extra.c:522msgid "'savehistory' can only be used in Rgui and Rterm"msgstr "'savehistory' 只能在 Rgui 和 Rterm 中使用"#: src/gnuwin32/extra.c:539msgid "'loadhistory' can only be used in Rgui and Rterm"msgstr "'loadhistory' 只能在 Rgui 和 Rterm 中使用"#: src/gnuwin32/extra.c:552 src/unix/sys-std.c:1255msgid "invalid timestamp"msgstr "時間截記不正確"#: src/gnuwin32/extra.c:675 src/gnuwin32/extra.c:1812#: src/gnuwin32/extra.c:1993 src/gnuwin32/extra.c:1996#: src/gnuwin32/extra.c:1999 src/main/character.c:561 src/main/colors.c:365#: src/main/connections.c:3224 src/main/context.c:643 src/main/context.c:662#: src/main/datetime.c:588 src/main/datetime.c:658 src/main/datetime.c:904#: src/main/dotcode.c:197 src/main/errors.c:833 src/main/errors.c:864#: src/main/errors.c:965 src/main/errors.c:990 src/main/errors.c:995#: src/main/optimize.c:95 src/main/optimize.c:102 src/main/optimize.c:111#: src/main/optimize.c:180 src/main/optimize.c:186 src/main/optimize.c:195#: src/main/platform.c:2154 src/main/plot.c:276 src/main/plot.c:470#: src/main/plot.c:475 src/main/plot.c:2287 src/main/plot.c:2294#: src/main/plot.c:3326 src/main/plot.c:3328 src/main/plot.c:3330#: src/main/plot.c:3488 src/main/plot3d.c:1398 src/main/plot3d.c:2527#: src/main/plot3d.c:2531 src/main/plot3d.c:2533 src/main/seq.c:167#: src/main/seq.c:265 src/main/seq.c:268 src/main/sort.c:869#: src/main/sort.c:968 src/main/source.c:209 src/main/summary.c:1026#: src/main/sysutils.c:229 src/main/util.c:885 src/main/util.c:890#: src/main/util.c:897 src/main/util.c:900 src/modules/X11/devX11.c:2803#: src/modules/X11/devX11.c:2830 src/modules/X11/devX11.c:2835#: src/modules/X11/devX11.c:2840 src/modules/X11/devX11.c:2850#: src/modules/X11/devX11.c:2855 src/modules/X11/devX11.c:2859#: src/modules/X11/devX11.c:3320 src/unix/sys-std.c:1302#, c-formatmsgid "invalid '%s' value"msgstr "'%s' 值不正確"#: src/gnuwin32/extra.c:717 src/gnuwin32/extra.c:730msgid "incorrect argument"msgstr "引數不正確"#: src/gnuwin32/extra.c:721msgid "don't be silly!: your machine has a 4Gb address limit"msgstr "別傻了!: 您的機器有 4Gb 的位址上限"#: src/gnuwin32/extra.c:725#, fuzzymsgid "cannot decrease memory limit: ignored"msgstr "無法減少記憶體限制"#: src/gnuwin32/extra.c:872#, fuzzymsgid "Select one or more"msgstr "選擇: "#: src/gnuwin32/extra.c:872#, fuzzymsgid "Select one"msgstr "選擇: "#: src/gnuwin32/extra.c:1058msgid "argument must be a character vector or a raw vector"msgstr "引數必須是字元向量或純量向量"#: src/gnuwin32/extra.c:1095 src/main/connections.c:1857msgid "Unable to open the clipboard"msgstr "無法開啟剪貼簿"#: src/gnuwin32/extra.c:1100 src/main/connections.c:1861msgid "Unable to write to the clipboard"msgstr "無法寫入剪貼簿"#: src/gnuwin32/extra.c:1121 src/gnuwin32/extra.c:1178msgid "'path' must be a character vector"msgstr "'path' 必須是字元向量"#: src/gnuwin32/extra.c:1238 src/gnuwin32/extra.c:1311msgid "'default' must be a character string"msgstr "'default' 必須為字串"#: src/gnuwin32/extra.c:1240 src/gnuwin32/extra.c:1313msgid "'default' is overlong"msgstr "'default' 太長"#: src/gnuwin32/extra.c:1244 src/gnuwin32/extra.c:1317msgid "'caption' must be a character string"msgstr "'caption' 必須為字串"#: src/gnuwin32/extra.c:1246msgid "'multi' must be a logical value"msgstr "'multi' 必須為邏輯值"#: src/gnuwin32/extra.c:1248msgid "'filterindex' must be an integer value"msgstr "'filterindex' 必須為整數"#: src/gnuwin32/extra.c:1399msgid "'title' must be a character string"msgstr "'title' 必須為字串"#: src/gnuwin32/extra.c:1416#, fuzzymsgid "'text' must be a character string"msgstr "'title' 必須為字串"#: src/gnuwin32/extra.c:1446#, fuzzy, c-formatmsgid "'%s' must be length 1"msgstr "'which' 的長度必須為 1"#: src/gnuwin32/extra.c:1562#, fuzzy, c-formatmsgid "'%s' must be a list"msgstr "'dimnames' 必須是串列"#: src/gnuwin32/extra.c:1566#, fuzzy, c-formatmsgid "'%s' element %d is not a window handle"msgstr "'%s' 呼叫不正確"#: src/gnuwin32/extra.c:1598 src/gnuwin32/extra.c:1600#: src/gnuwin32/extra.c:1623 src/gnuwin32/extra.c:1625#: src/gnuwin32/extra.c:1672 src/main/gevents.c:47 src/main/gevents.c:73msgid "invalid device"msgstr "裝置無效"#: src/gnuwin32/extra.c:1601msgid "requires SDI mode"msgstr "需要用 SDI 模式"#: src/gnuwin32/extra.c:1666 src/main/gevents.c:44 src/main/gevents.c:70msgid "invalid graphical device number"msgstr "繪圖裝置號碼無效"#: src/gnuwin32/extra.c:1676msgid "bad device"msgstr "裝置不當"#: src/gnuwin32/extra.c:2011#, fuzzy, c-formatmsgid "Registry key '%ls' not found"msgstr "找不到目的物件 '%s'"#: src/gnuwin32/extra.c:2075 src/gnuwin32/extra.c:2083msgid "invalid input in Rmbstowcs"msgstr "Rmbstowcs 中的輸入無效"#: src/gnuwin32/extra.c:2105 src/main/platform.c:1035msgid "file choice cancelled"msgstr "取消檔案選擇"#: src/gnuwin32/run.c:228#, fuzzy, c-formatmsgid "CreateProcess failed to run '%s'"msgstr "讀取 %s 失敗"#: src/gnuwin32/run.c:323msgid "Child process not responding. R will terminate it."msgstr ""#: src/gnuwin32/run.c:367#, c-formatmsgid "Exit code was %d"msgstr ""#: src/gnuwin32/run.c:394msgid "Insufficient memory (rpipeOpen)"msgstr "沒有足夠的記憶體 (rpipeOpen)"#: src/gnuwin32/run.c:593 src/main/dounzip.c:405msgid "seek not enabled for this connection"msgstr "這個連結上不能使用搜索"#: src/gnuwin32/run.c:599msgid "truncate not enabled for this connection"msgstr "這個連結不能使用截短"#: src/gnuwin32/run.c:679 src/gnuwin32/run.c:683 src/gnuwin32/run.c:696#: src/gnuwin32/run.c:724 src/main/connections.c:1061#: src/main/connections.c:1065 src/main/connections.c:1071#: src/main/connections.c:1085msgid "allocation of pipe connection failed"msgstr "管道連結指派失敗"#: src/gnuwin32/run.c:738#, fuzzymsgid "'names' is not a character string"msgstr "'msg1' 必須是字串"#: src/gnuwin32/sys-win32.c:182msgid "character string expected as first argument"msgstr "第一個引數應當是字串"#: src/gnuwin32/sys-win32.c:191msgid "character string expected as third argument"msgstr "第三個引數應當是字串"#: src/gnuwin32/system.c:121 src/unix/sys-unix.c:411msgid "reached session elapsed time limit"msgstr ""#: src/gnuwin32/system.c:123 src/unix/sys-unix.c:413msgid "reached elapsed time limit"msgstr ""#: src/gnuwin32/system.c:129 src/unix/sys-unix.c:419msgid "reached session CPU time limit"msgstr ""#: src/gnuwin32/system.c:131 src/unix/sys-unix.c:421msgid "reached CPU time limit"msgstr ""#: src/gnuwin32/system.c:151#, c-formatmsgid "Fatal error: %s\n"msgstr "嚴重錯誤：%s\n"#: src/gnuwin32/system.c:329 src/unix/sys-std.c:851#, c-formatmsgid "encoding '%s' is not recognised"msgstr "編碼 '%s' 無法確認"#: src/gnuwin32/system.c:335 src/unix/sys-std.c:857#, fuzzy, c-formatmsgid "<ERROR: re-encoding failure from encoding '%s'>\n"msgstr "<錯誤: 編碼中的輸入不正確> "#: src/gnuwin32/system.c:544 src/gnuwin32/system.c:1023#: src/gnuwin32/system.c:1035 src/main/connections.c:547#: src/main/connections.c:552 src/main/dounzip.c:114 src/main/saveload.c:1948#: src/main/serialize.c:2111 src/main/serialize.c:2116#: src/main/serialize.c:2197 src/main/serialize.c:2242 src/unix/system.c:312#: src/unix/system.c:323#, fuzzy, c-formatmsgid "cannot open file '%s': %s"msgstr "無法開啟檔案 '%s'"#: src/gnuwin32/system.c:558#, c-formatmsgid "file.show(): file '%s' does not exist\n"msgstr "file.show(): 檔案 '%s' 不存在\n"#: src/gnuwin32/system.c:986msgid "WARNING: no max-mem-size given\n"msgstr "警告: max-mem-size 沒有定義\n"#: src/gnuwin32/system.c:992#, c-formatmsgid "WARNING: --max-mem-size value is invalid: ignored\n"msgstr "警告: --max-mem-size 值不正確: 忽略不用\n"#: src/gnuwin32/system.c:994#, fuzzy, c-formatmsgid "WARNING: --max-mem-size=%lu%c: too large and ignored\n"msgstr "警告: --max-mem-size=%lu'%c': 太大，忽略不用\n"#: src/gnuwin32/system.c:999#, fuzzy, c-formatmsgid "WARNING: --max-mem-size=%4.1fM: too small and ignored\n"msgstr "警告: max-mem-size=%4.1fM 太小，忽略不用\n"#: src/gnuwin32/system.c:1003#, fuzzy, c-formatmsgid "WARNING: --max-mem-size=%4.0fM: too large and taken as %uM\n"msgstr "警告: max-mem-size=%4.1fM 太大，視為 3Gb\n"#: src/gnuwin32/system.c:1046 src/unix/system.c:342#, c-formatmsgid "WARNING: '-e %s' omitted as input is too long\n"msgstr ""#: src/gnuwin32/system.c:1050 src/unix/system.c:356#, c-formatmsgid "WARNING: unknown option '%s'\n"msgstr "警告: 沒有 '%s' 這樣的選項\n"#: src/gnuwin32/system.c:1072 src/unix/system.c:360#, c-formatmsgid "ARGUMENT '%s' __ignored__\n"msgstr "引數「%s」忽略不用\n"#: src/gnuwin32/system.c:1078 src/unix/system.c:367#, fuzzymsgid "cannot use -e with -f or --file"msgstr "不能設定非向量的長度"#: src/gnuwin32/system.c:1098msgid "creation of tmpfile failed -- set TMPDIR suitably?"msgstr ""#: src/gnuwin32/system.c:1117 src/unix/system.c:417msgid "you must specify '--save', '--no-save' or '--vanilla'"msgstr "您必須指定 '--save'、'--no-save' 或 '--vanilla' 其中的一個"#: src/gnuwin32/system.c:1122msgid """impossible to create 'reader thread'; you must free some system resources"msgstr "無法建立「reader thread」；您必須釋放一些系統資源"#: src/include/Errormsg.h:25 src/main/eval.c:2928 src/main/subscript.c:312#: src/main/subscript.c:353 src/main/subscript.c:457 src/main/subscript.c:554msgid "subscript out of bounds"msgstr "下標超出邊界"#: src/include/Errormsg.h:26#, fuzzy, c-formatmsgid "object of type '%s' is not subsettable"msgstr "目的物件不是次集合表格"#: src/main/CConverters.c:305msgid "no R-to-C converter found corresponding to identifier"msgstr "找不到與識別碼相應的 R-to-C 轉換器"#: src/main/CommandLineArgs.c:172msgid "WARNING: no value given for --encoding given\n"msgstr "警告: 沒有設定 --enconding 的值\n"#: src/main/CommandLineArgs.c:195#, c-formatmsgid "WARNING: option '%s' no longer supported\n"msgstr "警告: 本版本不再支援 '%s' 選項\n"#: src/main/CommandLineArgs.c:209#, c-formatmsgid "WARNING: no value given for '%s'\n"msgstr "警告: 沒有設定 '%s' 的值\n"#: src/main/CommandLineArgs.c:217#, c-formatmsgid "WARNING: '%s' value is invalid: ignored\n"msgstr "警告: '%s' 的值不正確: 忽略不用\n"#: src/main/CommandLineArgs.c:221#, fuzzy, c-formatmsgid "WARNING: %s: too large and ignored\n"msgstr "警告: %s=%lu'%c': 太大，忽略不用\n"#: src/main/CommandLineArgs.c:237msgid "WARNING: no value given for '--max-ppsize'\n"msgstr "警告: 沒有設定 '--max-ppsize' 的值\n"#: src/main/CommandLineArgs.c:242msgid "WARNING: '-max-ppsize' value is negative: ignored\n"msgstr "警告: '-max-ppsize' 的值是負數: 忽略不用\n"#: src/main/CommandLineArgs.c:244msgid "WARNING: '-max-ppsize' value is too small: ignored\n"msgstr "警告: '-max-ppsize' 的值太小: 忽略不用\n"#: src/main/CommandLineArgs.c:247msgid "WARNING: '-max-ppsize' value is too large: ignored\n"msgstr "警告: '-max-ppsize' 的值太大: 忽略不用\n"#: src/main/RNG.c:140#, c-formatmsgid "unif_rand: unimplemented RNG kind %d"msgstr "unif_rand: RNG 類型 %d 尚未實作"#: src/main/RNG.c:205#, c-formatmsgid "FixupSeeds: unimplemented RNG kind %d"msgstr "FixupSeeds: RNG 類型 %d 尚未實作"#: src/main/RNG.c:240msgid "'user_unif_rand' not in load table"msgstr "'user_unif_rand' 在載入表中並不存在"#: src/main/RNG.c:248msgid "cannot read seeds unless 'user_unif_nseed' is supplied"msgstr "只有在設定了 'user_unif_nseed' 以後才能讀隨機種子"#: src/main/RNG.c:253msgid "seed length must be in 0...625; ignored"msgstr "隨機種子的長度必須在 0 到 625 之間; 忽略不用"#: src/main/RNG.c:261#, c-formatmsgid "RNG_Init: unimplemented RNG kind %d"msgstr "RNG_Init: RNG 類型 %d 尚未實作"#: src/main/RNG.c:301msgid ".Random.seed is a missing argument with no default"msgstr ".Random.seed 這個引數沒有設定也沒有預設值"#: src/main/RNG.c:302#, fuzzy, c-formatmsgid ".Random.seed is not an integer vector but of type '%s'"msgstr ".Random.seed 不是向量"#: src/main/RNG.c:308msgid ".Random.seed[1] is not a valid integer"msgstr ".Random.seed[1]不是正確的整數"#: src/main/RNG.c:312msgid ".Random.seed[0] is not a valid Normal type"msgstr ".Random.seed[0] 不是正確的 Normal 類別"#: src/main/RNG.c:323msgid ".Random.seed[1] = 5 but no user-supplied generator"msgstr ".Random.seed[1]=5 但沒有使用者指定的產生器"#: src/main/RNG.c:326msgid ".Random.seed[1] is not a valid RNG kind (code)"msgstr ".Random.seed[1] 不是正確的 RNG 類別 (程式碼)"#: src/main/RNG.c:348msgid ".Random.seed has wrong length"msgstr ".Random.seed 的長度不正確"#: src/main/RNG.c:401#, c-formatmsgid "RNGkind: unimplemented RNG kind %d"msgstr "RNGkind: RNG 類型 %d 尚未實作"#: src/main/RNG.c:413msgid "invalid Normal type in RNGkind"msgstr "RNGkind 中的 Normal 類別不正確"#: src/main/RNG.c:416msgid "'user_norm_rand' not in load table"msgstr "'user_norm_rand' 不在載入表中"#: src/main/RNG.c:459msgid "supplied seed is not a valid integer"msgstr "提供的隨機種子不是正確的整數"#: src/main/Rdynload.c:250msgid "R_RegisterRoutines called with invalid DllInfo object."msgstr "R_RegisterRoutines 呼叫時 DllInfo 目的物件不正確。"#: src/main/Rdynload.c:533msgid "Maximal number of DLLs reached..."msgstr "已達到了 DLL 數目的上限..."#: src/main/Rdynload.c:588msgid "could not allocate space for 'path'"msgstr "無法為 'path' 指派空間"#: src/main/Rdynload.c:601#, c-formatmsgid "DLLname '%s' is too long"msgstr "DLLname '%s' 太長"#: src/main/Rdynload.c:622msgid "could not allocate space for 'name'"msgstr "無法為 'name' 指派空間"#: src/main/Rdynload.c:897 src/main/Rdynload.c:913 src/main/util.c:689msgid "character argument expected"msgstr "需要字元引數"#: src/main/Rdynload.c:903 src/main/Rdynload.c:936#, fuzzy, c-formatmsgid """unable to load shared object '%s':\n"" %s"msgstr """無法載入共享函數庫「%s」：\n"" %s"#: src/main/Rdynload.c:916#, fuzzy, c-formatmsgid "shared object '%s' was not loaded"msgstr "沒有載入動態/共享函數庫 '%s'"#: src/main/Rdynload.c:976#, c-formatmsgid "cannot allocate memory for registered native symbol (%d bytes)"msgstr "無法給已登記的原生符號 (%d 位元組) 指派記憶體"#: src/main/Rdynload.c:1096msgid "must pass package name or DllInfo reference"msgstr "必須傳給套件名稱或 DllInfo 參照"#: src/main/Rdynload.c:1182 src/main/dotcode.c:128#, c-formatmsgid "Unimplemented type %d in createRSymbolObject"msgstr "createRSymbolObject 中的類型 %d 尚未被實作"#: src/main/Rdynload.c:1264msgid "R_getRegisteredRoutines() expects a DllInfo reference"msgstr "R_getRegisteredRoutines() 需要 DllInfo 參考"#: src/main/Rdynload.c:1267msgid "NULL value passed for DllInfo"msgstr "傳給 DllInfo 一個 NULL 值"#: src/main/Rdynload.c:1303 src/main/Rdynload.c:1309 src/main/Rdynload.c:1316#: src/main/Rdynload.c:1322 src/main/Rdynload.c:1328msgid "no dyn.load support in this R version"msgstr "本 R 版本不支援 dyn.load"#: src/main/Rdynload.c:1373#, c-formatmsgid "function '%s' not provided by package '%s'"msgstr ""#: src/main/Rdynload.c:1375#, fuzzymsgid "table entry must be an external pointer"msgstr "無法取消外部指標的類別"#: src/main/Rstrptime.h:503 src/main/Rstrptime.h:970#, fuzzy, c-formatmsgid "use of %s for input is not supported"msgstr "call_R 不支援 '%s' 型式"#: src/main/Rstrptime.h:1224msgid "input string is too long"msgstr "輸入字串太長"#: src/main/Rstrptime.h:1226msgid "invalid multibyte input string"msgstr "無效的多位元組輸入字串"#: src/main/Rstrptime.h:1229msgid "format string is too long"msgstr "格式字串太長"#: src/main/Rstrptime.h:1231msgid "invalid multibyte format string"msgstr "無效的多位元組格式字串"#: src/main/agrep.c:69 src/main/character.c:1004 src/main/character.c:1008#: src/main/grep.c:737 src/main/grep.c:1087 src/main/grep.c:1091#: src/main/grep.c:1771#, fuzzy, c-formatmsgid "argument '%s' has length > 1 and only the first element will be used"msgstr "條件的長度 > 1，因此只能用其第一元素"#: src/main/agrep.c:93 src/main/grep.c:792 src/main/grep.c:1813msgid "regular expression is invalid in this locale"msgstr "正規表示式不適用於此語言環境"#: src/main/agrep.c:99 src/main/grep.c:82#, fuzzy, c-formatmsgid "regcomp error: '%s'"msgstr "讀取錯誤"#: src/main/agrep.c:135 src/main/grep.c:198 src/main/grep.c:285#: src/main/grep.c:393 src/main/grep.c:548 src/main/grep.c:842#: src/main/grep.c:1869 src/main/grep.c:1935#, c-formatmsgid "input string %d is invalid in this locale"msgstr "輸入的字串 %d 不適用於此語言環境"#: src/main/apply.c:41 src/main/apply.c:101 src/main/complex.c:1013msgid "invalid length"msgstr "長度不正確"#: src/main/apply.c:96#, fuzzymsgid "FUN.VALUE must be a vector"msgstr "程式碼必須是一般向量"#: src/main/apply.c:98#, fuzzymsgid "invalid USE.NAMES value"msgstr "'%s' 值不正確"#: src/main/apply.c:144#, c-formatmsgid """values must be length %d,\n"" but FUN(X[[%d]]) result is length %d"msgstr ""#: src/main/apply.c:156#, c-formatmsgid """values must be type '%s',\n"" but FUN(X[[%d]]) result is type '%s'"msgstr ""#: src/main/apply.c:174#, fuzzy, c-formatmsgid "type '%s' is not supported"msgstr "call_R 不支援 '%s' 型式"#: src/main/arithmetic.c:35msgid "NaNs produced"msgstr "產生了 NaNs"#: src/main/arithmetic.c:36msgid "Non-numeric argument to mathematical function"msgstr "數學函數中使用了非數值引數"#: src/main/arithmetic.c:178msgid "probable complete loss of accuracy in modulus"msgstr "係數的精確度很可能完全損失"#: src/main/arithmetic.c:305msgid "operator needs one or two arguments"msgstr "運算子需要一或兩個引數"#: src/main/arithmetic.c:322msgid "non-numeric argument to binary operator"msgstr "二元運算子中有非數值引數"#: src/main/arithmetic.c:383 src/main/relop.c:123msgid "non-conformable arrays"msgstr "非調和陣列"#: src/main/arithmetic.c:426msgid "non-conformable time-series"msgstr "非調和時間序列"#: src/main/arithmetic.c:448 src/main/logic.c:120 src/main/relop.c:68#: src/main/relop.c:161#, fuzzymsgid "longer object length is not a multiple of shorter object length"msgstr "長的目的物件長度不是短的目的物件長度的整數倍"#: src/main/arithmetic.c:520msgid "invalid argument to unary operator"msgstr "一元運算子的引數不正確"#: src/main/arithmetic.c:544 src/main/arithmetic.c:563msgid "invalid unary operator"msgstr "一元運算子不正確"#: src/main/arithmetic.c:610msgid "NAs produced by integer overflow"msgstr "整數向上溢位產生了 NA"#: src/main/arithmetic.c:1040msgid "unimplemented real function of 1 argument"msgstr "單引數的實數函數目前還沒有實作"#: src/main/arithmetic.c:1054 src/main/complex.c:928 src/main/complex.c:1002msgid "unimplemented complex function"msgstr "尚未實作複數功能"#: src/main/arithmetic.c:1371 src/main/arithmetic.c:1754#: src/main/arithmetic.c:1928 src/main/arithmetic.c:2040#, c-formatmsgid "unimplemented real function of %d numeric arguments"msgstr "%d 個數值引數的實數函數尚未實作"#: src/main/arithmetic.c:1401#, fuzzy, c-formatmsgid "%d arguments passed to '%s' which requires 1 or 2"msgstr "給了 'log'%d 個引數，但它最多只能用兩個引數"#: src/main/arithmetic.c:1420msgid "invalid second argument of length 0"msgstr "第二引數長度為 0，不正確"#: src/main/arithmetic.c:1490#, fuzzymsgid "invalid argument 'base' of length 0"msgstr "第二引數長度為 0，不正確"#: src/main/arithmetic.c:1498#, c-formatmsgid "%d arguments passed to 'log' which requires 1 or 2"msgstr "給了 'log'%d 個引數，但它最多只能用兩個引數"#: src/main/array.c:70msgid "non-numeric matrix extent"msgstr "非數值的矩陣範圍"#: src/main/array.c:80#, fuzzymsgid "invalid 'nrow' value (too large or NA)"msgstr "矩陣: 'nrow' 值不正確 (或是太大、或為 NA)"#: src/main/array.c:82#, fuzzymsgid "invalid 'nrow' value (< 0)"msgstr "矩陣: 'nrow' 值不正確 (< 0)"#: src/main/array.c:85#, fuzzymsgid "invalid 'ncol' value (too large or NA)"msgstr "矩陣: 'ncol' 值不正確 (或是太大、或為 NA)"#: src/main/array.c:87#, fuzzymsgid "invalid 'ncol' value (< 0)"msgstr "矩陣: 'ncol' 值不正確 (< 0)"#: src/main/array.c:93#, fuzzy, c-formatmsgid """data length [%d] is not a sub-multiple or multiple of the number of rows [%d]"msgstr "資料長度[%d] 不是矩陣列數[%d] 的整數倍"#: src/main/array.c:96#, fuzzy, c-formatmsgid """data length [%d] is not a sub-multiple or multiple of the number of columns ""[%d]"msgstr "資料長度[%d] 不是矩陣行數[%d] 的整數倍"#: src/main/array.c:99msgid "data length exceeds size of matrix"msgstr "資料長度超過矩陣的大小"#: src/main/array.c:104#, fuzzymsgid "too many elements specified"msgstr "矩陣: 指定了太多的元素"#: src/main/array.c:168msgid "negative extents to matrix"msgstr "矩陣的範圍不能是負值"#: src/main/array.c:170msgid "allocMatrix: too many elements specified"msgstr "allocMatrix: 指定了太多的元素"#: src/main/array.c:197#, fuzzymsgid "negative extents to 3D array"msgstr "矩陣的範圍不能是負值"#: src/main/array.c:199#, fuzzymsgid "alloc3Darray: too many elements specified"msgstr "allocMatrix: 指定了太多的元素"#: src/main/array.c:222msgid "allocArray: too many elements specified by 'dims'"msgstr "allocArray: 'dims' 指定了太多的元素"#: src/main/array.c:395#, fuzzymsgid "a matrix-like object is required as argument to 'row/col'"msgstr "'row/col' 必須用矩陣引數"#: src/main/array.c:606#, fuzzymsgid "requires numeric/complex matrix/vector arguments"msgstr "需要數值矩陣/向量引數"#: src/main/array.c:696 src/main/array.c:700 src/main/array.c:704msgid "non-conformable arguments"msgstr "非調和引數"#: src/main/array.c:988msgid "argument is not a matrix"msgstr "引數不是矩陣"#: src/main/array.c:1023msgid "invalid first argument, must be an array"msgstr "第一個引數不正確, 必須是陣列"#: src/main/array.c:1038 src/main/array.c:1041msgid "'a' does not have named dimnames"msgstr ""#: src/main/array.c:1048#, c-formatmsgid "perm[%d] does not match a dimension name"msgstr ""#: src/main/array.c:1055msgid "'perm' is of wrong length"msgstr "'perm' 的長度不正確"#: src/main/array.c:1062msgid "value out of range in 'perm'"msgstr "'perm' 的值在範圍外"#: src/main/array.c:1144#, fuzzymsgid "'resize' must be TRUE or FALSE"msgstr "'increasing' 必須是 TRUE 或是 FALSE"#: src/main/array.c:1205msgid "'x' must be numeric"msgstr "'x' 必須為數值"#: src/main/attrib.c:39 src/main/attrib.c:221 src/main/attrib.c:257#: src/main/attrib.c:279 src/main/attrib.c:396 src/main/attrib.c:443#: src/main/attrib.c:492msgid "attempt to set an attribute on NULL"msgstr "試圖在 NULL 上設定屬性"#: src/main/attrib.c:71#, fuzzy, c-formatmsgid "row names must be 'character' or 'integer', not '%s'"msgstr "'hostname' 必須是長度為 1 的字元向量"#: src/main/attrib.c:123#, c-formatmsgid "getAttrib: invalid type (%s) for TAG"msgstr "getAttrib: 標記的類型 (%s) 不正確"#: src/main/attrib.c:371#, c-formatmsgid "invalid type (%s) for 'names': must be vector"msgstr "'names' 的類型 (%s) 不正確: 必須是向量"#: src/main/attrib.c:374#, c-formatmsgid "'names' attribute [%d] must be the same length as the vector [%d]"msgstr "'names' 屬性 [%d] 必須和向量的長度 [%d] 一樣"#: src/main/attrib.c:379msgid "names() applied to a non-vector"msgstr "names() 被用於非向量"#: src/main/attrib.c:387msgid "invalid time series parameters specified"msgstr "時間序列參數設定不正確"#: src/main/attrib.c:400#, fuzzymsgid "'tsp' attribute must be numeric"msgstr "'tsp' 屬性必須是長度為三的數值"#: src/main/attrib.c:406msgid "'tsp' attribute must be numeric of length three"msgstr "'tsp' 屬性必須是長度為三的數值"#: src/main/attrib.c:423msgid "cannot assign 'tsp' to zero-length vector"msgstr "零長度向量不能設成 'tsp'"#: src/main/attrib.c:454msgid "attempt to set invalid 'comment' attribute"msgstr "試圖設定無效的 'comment' 屬性"#: src/main/attrib.c:501msgid "adding class \"factor\" to an invalid object"msgstr ""#: src/main/attrib.c:509msgid "attempt to set invalid 'class' attribute"msgstr "試圖設定無效的 'class' 屬性"#: src/main/attrib.c:784msgid "incompatible 'names' argument"msgstr "不相容的 'names' 引數"#: src/main/attrib.c:839#, c-formatmsgid "invalid type (%s) to set 'names' attribute"msgstr "以無效的類型 (%s) 設定 'names' 屬性"#: src/main/attrib.c:908msgid "'dimnames' applied to non-array"msgstr "'dimnames' 被應用於非陣列"#: src/main/attrib.c:913msgid "'dimnames' must be a list"msgstr "'dimnames' 必須是串列"#: src/main/attrib.c:916 src/main/attrib.c:939#, c-formatmsgid "length of 'dimnames' [%d] must match that of 'dims' [%d]"msgstr "'dimnames' 的長度 [%d] 必須同 'dims' 的長度 [%d] 相等"#: src/main/attrib.c:945#, c-formatmsgid "invalid type (%s) for 'dimnames' (must be a vector)"msgstr "設 'dimnames' 時的類型 (%s) 不正確 (必須為向量)"#: src/main/attrib.c:948#, c-formatmsgid "length of 'dimnames' [%d] not equal to array extent"msgstr "'dimnames' 的長度 [%d] 必須與陣列範圍相等"#: src/main/attrib.c:1010 src/main/builtin.c:64 src/main/builtin.c:101#: src/main/envir.c:1512 src/main/envir.c:1663 src/main/envir.c:1724#: src/main/envir.c:1847 src/main/paste.c:68 src/main/paste.c:263#: src/main/plot.c:1729 src/main/random.c:474msgid "invalid first argument"msgstr "第一個引數不正確"#: src/main/attrib.c:1013 src/main/plot.c:1736msgid "invalid second argument"msgstr "第二個引數不正確"#: src/main/attrib.c:1021#, fuzzymsgid "length-0 dimension vector is invalid"msgstr "dim: 零維長度的向量無效"#: src/main/attrib.c:1026msgid "the dims contain missing values"msgstr ""#: src/main/attrib.c:1028msgid "the dims contain negative values"msgstr ""#: src/main/attrib.c:1032#, fuzzy, c-formatmsgid "dims [product %d] do not match the length of object [%d]"msgstr "dim<- : dims [product %d] 與目的物件 [%d] 的長度不符"#: src/main/attrib.c:1098msgid "duplicated levels will not be allowed in factors anymore"msgstr ""#: src/main/attrib.c:1128#, fuzzymsgid "attributes must be a list or NULL"msgstr "屬性必須在串列中設定"#: src/main/attrib.c:1133msgid "attributes must be named"msgstr "屬性必須命名"#: src/main/attrib.c:1137#, c-formatmsgid "all attributes must have names [%d does not]"msgstr "所有的屬性都必須有名稱 [%d 沒有]"#: src/main/attrib.c:1236#, fuzzymsgid "'which' must be of mode character"msgstr "'name' 屬性必須是字元"#: src/main/attrib.c:1238#, fuzzymsgid "exactly one attribute 'which' must be given"msgstr "只能給出一個 'name' 屬性"#: src/main/attrib.c:1296 src/main/attrib.c:1319 src/main/subscript.c:209#: src/main/subscript.c:213 src/main/subset.c:1065 src/main/subset.c:1115#, c-formatmsgid "partial match of '%s' to '%s'"msgstr ""#: src/main/attrib.c:1351#, fuzzymsgid "'name' must be non-null character string"msgstr "'name' 必須為非空字元"#: src/main/attrib.c:1473 src/main/attrib.c:1544 src/main/attrib.c:1581msgid "invalid type or length for slot name"msgstr "名稱插槽的類型或長度不正確"#: src/main/attrib.c:1507#, c-formatmsgid "cannot get a slot (\"%s\") from an object of type \"%s\""msgstr "類型 \"%2$s\" 的目的物件中沒有 \"%1$s\" 這樣一個插槽"#: src/main/attrib.c:1518#, c-formatmsgid "no slot of name \"%s\" for this object of class \"%s\""msgstr "\"%1$s\" 插槽名不存在於 \"%2$s\" 類型目的物件中"#: src/main/attrib.c:1535#, fuzzymsgid "attempt to set slot on NULL object"msgstr "試圖在 NULL 上設定屬性"#: src/main/attrib.c:1576msgid "formal classes cannot be used without the methods package"msgstr "一定要有方法套件才能使用正式類別"#: src/main/attrib.c:1588#, c-formatmsgid """trying to get slot \"%s\" from an object of a basic class (\"%s\") with no ""slots"msgstr "無法從沒有插槽的基本類別 (\"%2$s\") 的目的物件中取得 \"%1$s\" 插槽"#: src/main/attrib.c:1592#, c-formatmsgid """trying to get slot \"%s\" from an object (class \"%s\") that is not an S4 ""object "msgstr "嘗試從一個不是 S4 物件的物件 (類別 \"%2$s\") 中獲取插槽 \"%1$s\" "#: src/main/base.c:275#, fuzzymsgid "Event GE_ScalePS requires a single numeric value"msgstr "UpdatePS 事件需要單一數值"#: src/main/bind.c:272 src/main/bind.c:312 src/main/bind.c:365#: src/main/bind.c:443 src/main/bind.c:473#, fuzzy, c-formatmsgid "type '%s' is unimplemented in '%s'"msgstr "'%2$s' 中尚未實作類型 %1$d"#: src/main/bind.c:672msgid "repeated formal argument 'recursive'"msgstr "正式引數 'recursive' 出現重複"#: src/main/bind.c:683msgid "repeated formal argument 'use.names'"msgstr "正式引數 'use.names' 出現重複"#: src/main/bind.c:881msgid "argument not a list"msgstr "引數不是串列"#: src/main/bind.c:1025 src/main/eval.c:2130 src/main/eval.c:2139#: src/main/objects.c:311 src/main/objects.c:346 src/main/objects.c:718#: src/main/objects.c:735 src/main/objects.c:742#, c-formatmsgid "class name too long in '%s'"msgstr "'%s' 中的類別名稱太長"#: src/main/bind.c:1100msgid "cannot create a matrix from these types"msgstr "無法從這些類型建立矩陣"#: src/main/bind.c:1170#, c-formatmsgid "number of rows of matrices must match (see arg %d)"msgstr "矩陣的列數必須相符 (參看引數 %d)"#: src/main/bind.c:1405#, c-formatmsgid "number of columns of matrices must match (see arg %d)"msgstr "矩陣的行數必須相符 (參看引數 %d)"#: src/main/builtin.c:40 src/main/builtin.c:44msgid "vector size cannot be NA"msgstr "向量大小不能是 NA"#: src/main/builtin.c:48#, fuzzymsgid "vector size cannot be NA/NaN"msgstr "向量大小不能是 NA"#: src/main/builtin.c:49#, fuzzymsgid "vector size cannot be infinite"msgstr "向量大小不能是負的"#: src/main/builtin.c:50msgid "vector size cannot be negative"msgstr "向量大小不能是負的"#: src/main/builtin.c:51msgid "vector size specified is too large"msgstr "指定的向量大小太大"#: src/main/builtin.c:73 src/main/builtin.c:82 src/main/builtin.c:276#: src/main/builtin.c:308 src/main/builtin.c:350 src/main/builtin.c:360#: src/main/coerce.c:1436 src/main/connections.c:2746 src/main/engine.c:2839#: src/main/envir.c:921 src/main/envir.c:974 src/main/envir.c:1064#: src/main/envir.c:1521 src/main/envir.c:1668 src/main/envir.c:1735#: src/main/envir.c:1856 src/main/envir.c:2529 src/main/envir.c:2589#: src/main/envir.c:2908 src/main/envir.c:2937 src/main/envir.c:2958#: src/main/envir.c:2981 src/main/envir.c:3015 src/main/envir.c:3035#: src/main/envir.c:3340 src/main/envir.c:3344 src/main/eval.c:3736#: src/main/objects.c:190 src/main/objects.c:196 src/main/saveload.c:2057#: src/main/saveload.c:2338 src/main/serialize.c:2264msgid "use of NULL environment is defunct"msgstr "NULL 環境的使用已經廢止"#: src/main/builtin.c:288msgid "replacement object is not an environment"msgstr "替換目的物件不是環境物件"#: src/main/builtin.c:312msgid "'enclos' must be an environment"msgstr "'enclos' 必須是環境物件"#: src/main/builtin.c:337 src/main/builtin.c:355msgid "argument is not an environment"msgstr "引數不是環境物件"#: src/main/builtin.c:339msgid "the empty environment has no parent"msgstr "空環境沒有上一層"#: src/main/builtin.c:357msgid "can not set parent of the empty environment"msgstr "無法設定空環境的上層"#: src/main/builtin.c:365msgid "'parent' is not an environment"msgstr "'parent' 不是環境物件"#: src/main/builtin.c:487 src/main/connections.c:3327#: src/main/connections.c:3338 src/main/connections.c:3686#: src/main/connections.c:3717 src/main/connections.c:4088#: src/main/connections.c:4150 src/main/connections.c:4357#: src/main/connections.c:4361 src/main/connections.c:4721#: src/main/deparse.c:312 src/main/deparse.c:315 src/main/deparse.c:396#: src/main/deparse.c:399 src/main/scan.c:1704 src/main/serialize.c:1657msgid "cannot write to this connection"msgstr "無法寫入此連結"#: src/main/builtin.c:492 src/main/builtin.c:522 src/main/platform.c:342#: src/main/platform.c:345 src/main/plot3d.c:2541 src/main/plot3d.c:2545#, c-formatmsgid "invalid '%s' specification"msgstr "'%s' 設定不正確"#: src/main/builtin.c:509msgid "non-positive 'fill' argument will be ignored"msgstr "非正數的 'fill' 引數將會被忽略"#: src/main/builtin.c:584#, c-formatmsgid "argument %d (type '%s') cannot be handled by 'cat'"msgstr "'cat' 目前還不能用 %d 引數 (型態 '%s')"#: src/main/builtin.c:703msgid "vector: zero-length 'type' argument"msgstr "向量: 'type' 引數的長度為零"#: src/main/builtin.c:722#, fuzzy, c-formatmsgid "vector: cannot make a vector of mode '%s'."msgstr "向量: 無法建立狀態為 \"%s\" 的向量。"#: src/main/builtin.c:747msgid "cannot set length of non-vector"msgstr "不能設定非向量的長度"#: src/main/builtin.c:848 src/main/devices.c:365 src/main/options.c:559msgid "invalid argument"msgstr "引數不正確"#: src/main/builtin.c:850 src/main/builtin.c:854 src/main/character.c:335#: src/main/coerce.c:2591#, fuzzymsgid "invalid value"msgstr "'%s' 值不正確"#: src/main/builtin.c:853#, fuzzymsgid "missing value for 'length'"msgstr "length<- 'length' 遺漏了設定值"#: src/main/builtin.c:877 src/main/eval.c:417 src/main/eval.c:516#: src/main/eval.c:1574 src/main/eval.c:1627 src/main/eval.c:1682#: src/main/eval.c:2013 src/main/eval.c:3368 src/main/eval.c:3475msgid "'...' used in an incorrect context"msgstr "'...' 的上下文用得不正確"#: src/main/builtin.c:913msgid "'EXPR' is missing"msgstr ""#: src/main/builtin.c:917#, fuzzymsgid "EXPR must be a length 1 vector"msgstr "switch: EXPR 必須回傳長度為 1 的向量"#: src/main/character.c:93 src/main/character.c:116#, fuzzy, c-formatmsgid "'%s' requires a character vector"msgstr "strtrim() 需要字元向量"#: src/main/character.c:146 src/main/character.c:170 src/main/character.c:619#: src/main/character.c:715#, c-formatmsgid "invalid multibyte string %d"msgstr "多位元組字串 %d 不正確"#: src/main/character.c:234msgid "extracting substrings from a non-character object"msgstr "無法從非字元目的物件中抽取子字串"#: src/main/character.c:239 src/main/character.c:332#, fuzzymsgid "invalid substring argument(s)"msgstr "字串引數不正確"#: src/main/character.c:327msgid "replacing substrings in a non-character object"msgstr "無法在非字元的目的物件中替換子字串"#: src/main/character.c:519#, fuzzymsgid "the first argument must be a character vector"msgstr "第一引數必須是字元向量"#: src/main/character.c:537msgid "abbreviate used with non-ASCII chars"msgstr "abbreviate 不適用於非 ASCII 字元"#: src/main/character.c:557msgid "non-character names"msgstr "不能有非字元名稱"#: src/main/character.c:661 src/main/grep.c:144#, fuzzymsgid "non-character argument"msgstr "不能有非字元名稱"#: src/main/character.c:770#, c-formatmsgid "decreasing range specification ('%lc-%lc')"msgstr "正在遞減範圍設定 ('%lc-%lc')"#: src/main/character.c:856#, c-formatmsgid "decreasing range specification ('%c-%c')"msgstr "正在遞減範圍設定 ('%c-%c')"#: src/main/character.c:1044#, fuzzymsgid "invalid UTF-8 string 'old'"msgstr "多位元組字串 'old' 不正確"#: src/main/character.c:1050msgid "invalid multibyte string 'old'"msgstr "多位元組字串 'old' 不正確"#: src/main/character.c:1063#, fuzzymsgid "invalid UTF-8 string 'new'"msgstr "多位元組字串 'new' 不正確"#: src/main/character.c:1069msgid "invalid multibyte string 'new'"msgstr "多位元組字串 'new' 不正確"#: src/main/character.c:1095 src/main/character.c:1183msgid "'old' is longer than 'new'"msgstr "'old' 比 'new' 要長"#: src/main/character.c:1127#, c-formatmsgid "invalid input multibyte string %d"msgstr "輸入的多位元組字串 %d 不正確"#: src/main/character.c:1232msgid "strtrim() requires a character vector"msgstr "strtrim() 需要字元向量"#: src/main/coerce.c:28#, fuzzymsgid "invalid 'mode' argument"msgstr "'%s' 引數不正確"#: src/main/coerce.c:29msgid "applies only to lists and vectors"msgstr "只能用於串列和向量"#: src/main/coerce.c:73 src/main/errors.c:1102msgid "NAs introduced by coercion"msgstr "強制變更過程中產生了 NA"#: src/main/coerce.c:75 src/main/errors.c:1103msgid "inaccurate integer conversion in coercion"msgstr "強制變更造成整數不精確"#: src/main/coerce.c:77 src/main/errors.c:1104msgid "imaginary parts discarded in coercion"msgstr "強制變更時丟棄了虛數部分"#: src/main/coerce.c:79msgid "out-of-range values treated as 0 in coercion to raw"msgstr "在強制變更成純量值時，任何溢位值當作 0 來處理"#: src/main/coerce.c:409#, fuzzy, c-formatmsgid "invalid data of mode '%s' (too short)"msgstr "狀態為 \"%s\" 的資料不正確 (太短)"#: src/main/coerce.c:937#, fuzzy, c-formatmsgid "'pairlist' object cannot be coerced to type '%s'"msgstr "'pairlist' 目的物件不能被強制變更成 %s"#: src/main/coerce.c:1045#, fuzzy, c-formatmsgid "(list) object cannot be coerced to type '%s'"msgstr "(串列) 目的物件不能強制變更成 %s"#: src/main/coerce.c:1068#, fuzzy, c-formatmsgid "(symbol) object cannot be coerced to type '%s'"msgstr "(串列) 目的物件不能強制變更成 %s"#: src/main/coerce.c:1084 src/main/coerce.c:1384msgid "no method for coercing this S4 class to a vector"msgstr ""#: src/main/coerce.c:1143msgid "environments cannot be coerced to other types"msgstr "環境物件不能被強制變更成其它類型"#: src/main/coerce.c:1287#, fuzzymsgid "attempting to coerce non-factor"msgstr "不能加大非向量"#: src/main/coerce.c:1432msgid "list argument expected"msgstr "需要串列引數"#: src/main/coerce.c:1440 src/main/eval.c:3733 src/main/eval.c:3740msgid "invalid environment"msgstr "環境物件不正確"#: src/main/coerce.c:1444msgid "argument must have length at least 1"msgstr "引數的長度至少要為 1"#: src/main/coerce.c:1469msgid "invalid body for function"msgstr "函數本體不正確"#: src/main/coerce.c:1492msgid "invalid length 0 argument"msgstr "長度為 0 的引數是不正確的"#: src/main/coerce.c:1507msgid "invalid argument list"msgstr "引數串列不正確"#: src/main/coerce.c:1817msgid "type \"single\" unimplemented in R"msgstr "類型 \"single\" 目前在 R 中還沒有實作"#: src/main/coerce.c:1819msgid "unimplemented predicate"msgstr "尚未實作 predicate"#: src/main/coerce.c:1960 src/main/coerce.c:2060#, fuzzy, c-formatmsgid "%s() applied to non-(list or vector) of type '%s'"msgstr "%s() 不適用於非串列或非向量"#: src/main/coerce.c:2200 src/main/dotcode.c:770 src/main/dotcode.c:813#: src/main/dotcode.c:1637msgid "'name' is missing"msgstr ""#: src/main/coerce.c:2207msgid "first argument must be a character string"msgstr "第一個引數必須是字串"#: src/main/coerce.c:2234#, fuzzymsgid "'what' must be a character string or a function"msgstr "第一個引數必須是字串或函數"#: src/main/coerce.c:2237#, fuzzymsgid "'args' must be a list"msgstr "'dimnames' 必須是串列"#: src/main/coerce.c:2240msgid "'envir' must be an environment"msgstr "'envir' 必須是環境物件"#: src/main/coerce.c:2315 src/main/coerce.c:2356msgid "... used in an incorrect context"msgstr "... 的上下文用得不正確"#: src/main/coerce.c:2404msgid "invalid environment specified"msgstr "環境設定不正確"#: src/main/coerce.c:2465msgid "Setting class(x) to NULL; result will no longer be an S4 object"msgstr ""#: src/main/coerce.c:2468#, c-formatmsgid """Setting class(x) to multiple strings (\"%s\", \"%s\", ...); result will no ""longer be an S4 object"msgstr ""#: src/main/coerce.c:2470#, c-formatmsgid """Setting class(x) to \"%s\" sets attribute to NULL; result will no longer be ""an S4 object"msgstr ""#: src/main/coerce.c:2500msgid "invalid replacement object to be a class string"msgstr "字串類別的替換目的物件不正確"#: src/main/coerce.c:2520#, c-formatmsgid """\"%s\" can only be set as the class if the object has this type; found \"%s\""msgstr "只有在目的物件有此一類別的情況下才能設 \"%s\"；不應該有 \"%s\""#: src/main/coerce.c:2538#, c-formatmsgid """invalid to set the class to matrix unless the dimension attribute is of ""length 2 (was %d)"msgstr "除非維度的長度為 2(目前是 %d)，否則不能設為矩陣類別"#: src/main/coerce.c:2546msgid """cannot set class to \"array\" unless the dimension attribute has length > 0"msgstr "除非維度的長度 >0，否則不能設為 \"array\" 類別"#: src/main/coerce.c:2582#, fuzzymsgid "'value' must be non-null character string"msgstr "'name' 必須為非空字元"#: src/main/coerce.c:2595msgid "invalid to change the storage mode of a factor"msgstr ""#: src/main/colors.c:69#, c-formatmsgid "color intensity %g, not in [0,1]"msgstr "顏色強度 %g 不在 [0,1] 之間"#: src/main/colors.c:76#, c-formatmsgid "color intensity %d, not in 0:255"msgstr "顏色強度 %d 不在 0:255 之間"#: src/main/colors.c:83#, c-formatmsgid "alpha level %g, not in [0,1]"msgstr "alpha 層次 %g 不在 [0,1] 之間"#: src/main/colors.c:90#, c-formatmsgid "alpha level %d, not in 0:255"msgstr "alpha 層次 %d 不在 0:255 之間"#: src/main/colors.c:134#, fuzzymsgid "invalid hsv color"msgstr "hcl 顏色不正確"#: src/main/colors.c:246msgid "invalid hcl color"msgstr "hcl 顏色不正確"#: src/main/colors.c:297#, fuzzymsgid "invalid 'names' vector"msgstr "names 向量不正確"#: src/main/colors.c:342msgid "invalid gray level, must be in [0,1]."msgstr "graylevel 必須在 [0,1] 之間。"#: src/main/colors.c:432msgid "rgb is not a matrix (internally)"msgstr "rgb 不是矩陣 (內部)"#: src/main/colors.c:435msgid "rgb must have 3 rows (internally)"msgstr "rgb 必須有三列 (內部)"#: src/main/colors.c:489msgid "bad hsv to rgb color conversion"msgstr "hsv 到 rgb 顏色轉換不正確"#: src/main/colors.c:1280 src/main/errors.c:1088 src/main/logic.c:165msgid "invalid argument type"msgstr "引數類型不正確"#: src/main/colors.c:1284msgid "unknown palette (need >= 2 colors)"msgstr "沒有這種調色盤 (需要 >= 兩種顏色)"#: src/main/colors.c:1288msgid "maximum number of colors exceeded"msgstr "顏色的數目已超過最大值"#: src/main/colors.c:1319 src/main/engine.c:2978msgid "invalid hex digit in 'color' or 'lty'"msgstr "十六進位 'color' 設定或 'lty' 設定不正確"#: src/main/colors.c:1329 src/main/colors.c:1339msgid "invalid RGB specification"msgstr "RGB 設定不正確"#: src/main/colors.c:1372#, fuzzy, c-formatmsgid "invalid color name '%s'"msgstr "顏色名稱不正確"#: src/main/colors.c:1381#, fuzzy, c-formatmsgid "invalid color specification '%s'"msgstr "顏色設定不正確"#: src/main/colors.c:1501msgid "supplied color is not numeric nor character"msgstr "所提供的顏色既非數值亦非字元"#: src/main/colors.c:1533#, fuzzymsgid "Invalid color specification"msgstr "顏色設定不正確"#: src/main/complex.c:79msgid "invalid complex unary operator"msgstr "單一複數運算子不正確"#: src/main/complex.c:369msgid "unimplemented complex operation"msgstr "複數運算目前還沒有實作"#: src/main/complex.c:485msgid "non-numeric argument to function"msgstr "函數不能有非數值引數"#: src/main/complex.c:1074msgid "invalid polynomial coefficient"msgstr "多項式係數不正確"#: src/main/complex.c:1079msgid "root finding code failed"msgstr "求根運算執行失敗"#: src/main/connections.c:104msgid "all connections are in use"msgstr "所有連結都已在使用"#: src/main/connections.c:115msgid "connection not found"msgstr "找不到連結"#: src/main/connections.c:127msgid "invalid connection"msgstr "連結不正確"#: src/main/connections.c:158#, c-formatmsgid "closing unused connection %d (%s)\n"msgstr ""#: src/main/connections.c:182 src/main/sysutils.c:587 src/main/sysutils.c:728#: src/main/sysutils.c:743 src/main/sysutils.c:827 src/main/sysutils.c:896#: src/main/sysutils.c:906 src/main/sysutils.c:919 src/main/sysutils.c:1208#, fuzzy, c-formatmsgid "unsupported conversion from '%s' to '%s'"msgstr "不支援這種轉換"#: src/main/connections.c:234 src/main/connections.c:250#: src/main/connections.c:411 src/main/connections.c:417#: src/main/connections.c:423 src/main/connections.c:434#: src/main/connections.c:441#, fuzzy, c-formatmsgid "%s not enabled for this connection"msgstr "這個連結上不能使用搜索"#: src/main/connections.c:291 src/main/connections.c:308#: src/main/connections.c:318 src/main/connections.c:2591#: src/main/connections.c:2605msgid "printing of extremely long output is truncated"msgstr "截短了需要列印的特長輸出"#: src/main/connections.c:339msgid "invalid char string in output conversion"msgstr "輸出轉換字串不正確"#: src/main/connections.c:394#, c-formatmsgid "invalid input found on input connection '%s'"msgstr "輸入連結 '%s' 中的輸入不正確"#: src/main/connections.c:655msgid "connection is not open for reading"msgstr "連結沒有開啟而不能讀"#: src/main/connections.c:660msgid "connection is not open for writing"msgstr "連結沒有開啟而不能寫"#: src/main/connections.c:700 src/main/connections.c:1912msgid "can only truncate connections open for writing"msgstr "只能截短已經開啟之可以寫入的連結"#: src/main/connections.c:705msgid "file truncation failed"msgstr "未能截短檔案"#: src/main/connections.c:707msgid "file truncation unavailable on this platform"msgstr "本平台上沒有檔案截短功能"#: src/main/connections.c:753 src/main/connections.c:757#: src/main/connections.c:763 src/main/connections.c:780msgid "allocation of file connection failed"msgstr "檔案連結指派失敗"#: src/main/connections.c:830#, c-formatmsgid "cannot create fifo '%s', reason '%s'"msgstr "無法建立先進先出 '%s'，原因是 '%s'"#: src/main/connections.c:836#, c-formatmsgid "'%s' exists but is not a fifo"msgstr "'%s' 存在但不是先進先出"#: src/main/connections.c:849#, c-formatmsgid "fifo '%s' is not ready"msgstr "先進先出 '%s' 還沒有準備好"#: src/main/connections.c:850#, c-formatmsgid "cannot open fifo '%s'"msgstr "無法開啟先進先出 '%s'"#: src/main/connections.c:891 src/main/connections.c:902#: src/main/connections.c:1257 src/main/connections.c:1267#: src/main/connections.c:1396 src/main/connections.c:1408#: src/main/connections.c:1929 src/main/connections.c:1945#: src/main/connections.c:2254 src/main/connections.c:4908#: src/main/connections.c:4972#, fuzzymsgid "too large a block specified"msgstr "矩陣: 指定了太多的元素"#: src/main/connections.c:911 src/main/connections.c:915#: src/main/connections.c:921 src/main/connections.c:937msgid "allocation of fifo connection failed"msgstr "先進先出連結指派失敗"#: src/main/connections.c:956 src/main/connections.c:1108#: src/main/connections.c:1685 src/main/connections.c:2892#: src/main/connections.c:4567msgid "only first element of 'description' argument used"msgstr "只用了 'description' 引數的第一個元素"#: src/main/connections.c:973#, fuzzymsgid """fifo(\"\") only supports open = \"w+\" and open = \"w+b\": using the former"msgstr "file(\"\") 只支援 open = \"w+\" 與 open = \"w+b\": 使用前者"#: src/main/connections.c:986 src/main/connections.c:1144#: src/main/connections.c:1746 src/main/connections.c:2857#: src/main/connections.c:2911 src/main/connections.c:2961#: src/main/connections.c:3232 src/main/connections.c:3334#: src/main/connections.c:3492 src/main/connections.c:3713#: src/main/connections.c:4037 src/main/connections.c:4146#: src/main/connections.c:4353 src/main/connections.c:4696 src/main/dcf.c:52#: src/main/deparse.c:308 src/main/deparse.c:392 src/main/saveload.c:2244#: src/main/saveload.c:2328 src/main/scan.c:901 src/main/scan.c:1012#: src/main/scan.c:1514 src/main/scan.c:1708 src/main/source.c:254msgid "cannot open the connection"msgstr "無法開啟連結"#: src/main/connections.c:1003msgid "fifo connections are not available on this system"msgstr "本系統沒有先進先出連結這個功能"#: src/main/connections.c:1035#, fuzzy, c-formatmsgid "cannot open pipe() cmd '%s': %s"msgstr "無法開啟 pipe() 命令 '%s'"#: src/main/connections.c:1186 src/main/connections.c:1478#, fuzzy, c-formatmsgid "cannot open compressed file '%s', probable reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/main/connections.c:1229msgid "whence = \"end\" is not implemented for gzfile connections"msgstr "whence = \"end\" 不適用於 gz 檔案連結"#: src/main/connections.c:1235msgid "seek on a gzfile connection returned an internal error"msgstr "讀取 gz 檔案連結時內部發生錯誤"#: src/main/connections.c:1276 src/main/connections.c:1280#: src/main/connections.c:1286 src/main/connections.c:1303msgid "allocation of gzfile connection failed"msgstr "指派 gz 檔案連結失敗"#: src/main/connections.c:1325msgid "append mode may not do what you expect"msgstr ""#: src/main/connections.c:1333#, fuzzy, c-formatmsgid "cannot open bzip2-ed file '%s', probable reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/main/connections.c:1342#, c-formatmsgid "file '%s' appears not to be compressed by bzip2"msgstr "檔案 '%s' 看起來不象是 bzip2 類別"#: src/main/connections.c:1351#, c-formatmsgid "initializing bzip2 compression for file '%s' failed"msgstr ""#: src/main/connections.c:1419 src/main/connections.c:1423#: src/main/connections.c:1429 src/main/connections.c:1446msgid "allocation of bzfile connection failed"msgstr "指派 bz 檔案連結失敗"#: src/main/connections.c:1491 src/main/connections.c:5513#, c-formatmsgid "cannot initialize lzma decoder, error %d"msgstr ""#: src/main/connections.c:1507#, c-formatmsgid "cannot initialize lzma encoder, error %d"msgstr ""#: src/main/connections.c:1635 src/main/connections.c:1639#: src/main/connections.c:1645 src/main/connections.c:1663#, fuzzymsgid "allocation of xzfile connection failed"msgstr "指派 gz 檔案連結失敗"#: src/main/connections.c:1722#, c-formatmsgid "this is a %s-compressed file which this build of R does not support"msgstr ""#: src/main/connections.c:1813 src/modules/X11/devX11.c:3452msgid "memory allocation to copy clipboard failed"msgstr "複製剪貼簿時記憶體指派失敗"#: src/main/connections.c:1818 src/modules/X11/devX11.c:3431#: src/modules/X11/devX11.c:3436msgid "clipboard cannot be opened or contains no text"msgstr "打不開剪貼簿，或是剪貼簿不含文字"#: src/main/connections.c:1829msgid "memory allocation to open clipboard failed"msgstr "開啟剪貼簿時記憶體指派失敗"#: src/main/connections.c:1901msgid "attempt to seek outside the range of the clipboard"msgstr "無法檢索剪貼簿範圍外的內容"#: src/main/connections.c:1943msgid "clipboard connection is open for reading only"msgstr "開啟了唯讀剪貼簿連結"#: src/main/connections.c:1963msgid "clipboard buffer is full and output lost"msgstr "剪貼簿緩衝區已滿，輸出資料丟失"#: src/main/connections.c:1984msgid "'mode' for the clipboard must be 'r' or 'w'"msgstr "剪貼簿 'mode' 必須是 'r' 或 'w'"#: src/main/connections.c:1987msgid "'mode' for the clipboard must be 'r' on Unix"msgstr "Unix 作業系統上剪貼簿 'mode' 必須是 'r'"#: src/main/connections.c:1990 src/main/connections.c:1996#: src/main/connections.c:2002 src/main/connections.c:2019msgid "allocation of clipboard connection failed"msgstr "剪貼簿連結指派失敗"#: src/main/connections.c:2088 src/main/connections.c:2092#: src/main/connections.c:2098msgid "allocation of terminal connection failed"msgstr "終端機連結指派失敗"#: src/main/connections.c:2231msgid "attempting to add too many elements to raw vector"msgstr ""#: src/main/connections.c:2282#, fuzzymsgid "attempt to seek outside the range of the raw connection"msgstr "無法檢索剪貼簿範圍外的內容"#: src/main/connections.c:2293 src/main/connections.c:2297#: src/main/connections.c:2303 src/main/connections.c:2329#, fuzzymsgid "allocation of raw connection failed"msgstr "url 連結指派失敗"#: src/main/connections.c:2383#, fuzzymsgid "'con' is not a rawConnection"msgstr "'con' 不是個連結"#: src/main/connections.c:2386#, fuzzymsgid "'con' is not an output rawConnection"msgstr "'con' 不是個連結"#: src/main/connections.c:2422msgid "cannot allocate memory for text connection"msgstr "無法給文字連結指派記憶體"#: src/main/connections.c:2470msgid "seek is not relevant for text connection"msgstr "讀取對文字連結無用"#: src/main/connections.c:2478 src/main/connections.c:2482#: src/main/connections.c:2488 src/main/connections.c:2501#: src/main/connections.c:2692 src/main/connections.c:2696#: src/main/connections.c:2702 src/main/connections.c:2715#: src/main/connections.c:2721msgid "allocation of text connection failed"msgstr "文字連結指派失敗"#: src/main/connections.c:2669msgid "text connection: appending to a non-existent char vector"msgstr "文字連結: 不能附加給不存在的字元向量"#: src/main/connections.c:2773msgid "unsupported mode"msgstr "不支援的狀態"#: src/main/connections.c:2796#, fuzzymsgid "'con' is not a textConnection"msgstr "'con' 不是個連結"#: src/main/connections.c:2799#, fuzzymsgid "'con' is not an output textConnection"msgstr "'con' 不是個連結"#: src/main/connections.c:2872msgid "sockets are not available on this system"msgstr "本系統沒有插槽這個功能"#: src/main/connections.c:2941 src/main/connections.c:2990#: src/main/connections.c:3001 src/main/connections.c:3048#: src/main/connections.c:3069 src/main/connections.c:3092#: src/main/connections.c:3104 src/main/connections.c:3210#: src/main/connections.c:3317 src/main/connections.c:5011msgid "'con' is not a connection"msgstr "'con' 不是個連結"#: src/main/connections.c:2944msgid "cannot open standard connections"msgstr "無法開啟標準連結"#: src/main/connections.c:2946msgid "connection is already open"msgstr "連結已開啟"#: src/main/connections.c:2979msgid "unknown 'rw' value"msgstr "不明的 'rw' 值"#: src/main/connections.c:3050msgid "cannot close standard connections"msgstr "無法關閉標準連結"#: src/main/connections.c:3053msgid "cannot close output sink connection"msgstr "無法關閉輸出匯集連結"#: src/main/connections.c:3055msgid "cannot close messages sink connection"msgstr "無法關閉訊息匯集連結"#: src/main/connections.c:3071 src/main/connections.c:4720#: src/main/serialize.c:1647 src/main/serialize.c:1655msgid "connection is not open"msgstr "連結沒有開啟"#: src/main/connections.c:3164 src/main/connections.c:3176msgid "Line longer than buffer size"msgstr "列長大於緩衝區"#: src/main/connections.c:3222 src/main/connections.c:3236#: src/main/connections.c:3485 src/main/connections.c:3496#: src/main/connections.c:4021 src/main/connections.c:4041 src/main/dcf.c:49#: src/main/dcf.c:55 src/main/saveload.c:2321 src/main/scan.c:904#: src/main/scan.c:908 src/main/scan.c:1015 src/main/scan.c:1019#: src/main/serialize.c:1649 src/main/source.c:257 src/main/source.c:260msgid "cannot read from this connection"msgstr "無法從此連結讀取"#: src/main/connections.c:3249 src/main/connections.c:3268msgid "cannot allocate buffer in readLines"msgstr "無法給 readLines 指派緩衝區"#: src/main/connections.c:3290#, fuzzy, c-formatmsgid "incomplete final line found on '%s'"msgstr "readLines 讀 '%s' 時最後一列未完成"#: src/main/connections.c:3296msgid "too few lines read in readLines"msgstr "readLines 讀的列數不夠"#: src/main/connections.c:3397msgid "incomplete string at end of file has been discarded"msgstr "忽略檔案末端不完整的字串"#: src/main/connections.c:3403#, fuzzymsgid "null terminator not found: breaking string at 10000 bytes"msgstr "沒有 null 終止符: 字串截斷於 10000 個位元組"#: src/main/connections.c:3466 src/main/saveload.c:2322msgid "can only read from a binary connection"msgstr "無法讀取二進位連結"#: src/main/connections.c:3515 src/main/connections.c:3790msgid "size changing is not supported for complex vectors"msgstr "不支援複數向量大小的變更"#: src/main/connections.c:3540 src/main/connections.c:3558#: src/main/connections.c:3584 src/main/connections.c:3628#: src/main/connections.c:3648 src/main/connections.c:3771#: src/main/connections.c:3784 src/main/connections.c:3843#: src/main/connections.c:3875#, c-formatmsgid "size %d is unknown on this machine"msgstr "本系統沒有 %d 這樣大小的值"#: src/main/connections.c:3569msgid "raw is always of size 1"msgstr "raw 的大小只能是 1"#: src/main/connections.c:3677msgid "'x' is not an atomic vector type"msgstr "'x' 非基元向量類型"#: src/main/connections.c:3683msgid "can only write to a binary connection"msgstr "只能寫入二進位連結"#: src/main/connections.c:3703#, fuzzymsgid "only 2^31-1 bytes can be written to a raw vector"msgstr "只有 ascii 格式才能對文字狀態的連結進行寫入"#: src/main/connections.c:3705msgid "only 2^31-1 bytes can be written in a single readBin() call"msgstr ""#: src/main/connections.c:3750 src/main/connections.c:3903#: src/main/connections.c:4171 src/main/connections.c:4211msgid "problem writing to connection"msgstr "寫入連結有問題"#: src/main/connections.c:3795msgid "size changing is not supported for raw vectors"msgstr "不支援純量向量大小的變更"#: src/main/connections.c:3938 src/main/connections.c:3942#: src/main/connections.c:3983msgid "invalid UTF-8 input in readChar()"msgstr "readChar() 的 UTF-8 輸入不正確"#: src/main/connections.c:4046msgid "can only read in bytes in a non-UTF-8 MBCS locale"msgstr ""#: src/main/connections.c:4113#, fuzzymsgid "'object' is too short"msgstr "目的物件不是次集合表格"#: src/main/connections.c:4160#, fuzzymsgid "writeChar: more bytes requested than are in the string - will zero-pad"msgstr "writeChar：字串的長度比需要的位元組數目短 - 用零來補上"#: src/main/connections.c:4185msgid """writeChar: more characters requested than are in the string - will zero-pad"msgstr "writeChar：字串的長度比需要的位元組數目短 - 用零來補上"#: src/main/connections.c:4245 src/main/connections.c:4248#: src/main/connections.c:4286 src/main/connections.c:4291msgid "could not allocate space for pushBack"msgstr "無法為 pushBack 指派空間"#: src/main/connections.c:4275msgid "can only push back on open readable connections"msgstr "只能推回已開啟的可讀連結"#: src/main/connections.c:4277msgid "can only push back on text-mode connections"msgstr "只能推回文字狀態的連結"#: src/main/connections.c:4338 src/main/connections.c:4412msgid "sink stack is full"msgstr "匯集堆疊已滿"#: src/main/connections.c:4341msgid "cannot switch output to stdin"msgstr "無法將輸出轉往stdin"#: src/main/connections.c:4368msgid "no sink to remove"msgstr "沒有可以除去的匯集"#: src/main/connections.c:4406msgid "this platform does not support 'split=TRUE'"msgstr "本平臺不支援 'split=TRUE'"#: src/main/connections.c:4494#, fuzzy, c-formatmsgid "there is no connection %d"msgstr "'file' 不是連結"#: src/main/connections.c:4629msgid """file(\"\") only supports open = \"w+\" and open = \"w+b\": using the former"msgstr "file(\"\") 只支援 open = \"w+\" 與 open = \"w+b\": 使用前者"#: src/main/connections.c:4683 src/modules/internet/internet.c:113#: src/modules/internet/internet.c:567msgid "unsupported URL scheme"msgstr "不支援這種 URL 方案"#: src/main/connections.c:4774msgid "file stream does not have gzip magic number"msgstr "檔案串流沒有 gzip 魔術數字"#: src/main/connections.c:4785msgid "file stream does not have valid gzip header"msgstr "檔案串流的 gzip 表頭不正確"#: src/main/connections.c:4851msgid "writing error whilst flushing 'gzcon' connection"msgstr "清除 'gzcon' 連結時寫入發生錯誤"#: src/main/connections.c:4954#, c-formatmsgid "crc error %x %x\n"msgstr "crc 錯誤 %x %x\n"#: src/main/connections.c:4981msgid "write error on 'gzcon' connection"msgstr "'gzcon' 連結寫入發生錯誤"#: src/main/connections.c:5015msgid "'level' must be one of 0 ... 9"msgstr "'level' 必須是 0...9 之一"#: src/main/connections.c:5018msgid "'allowNonCompression' must be TRUE or FALSE"msgstr "'allowNonCompression' 的值必須是 TRUE 或是 FALSE"#: src/main/connections.c:5021msgid "this is already a gzcon connection"msgstr "這已經是 gzcon 連結"#: src/main/connections.c:5027msgid "can only use read- or write- binary connections"msgstr "只用讀或寫的二元連結"#: src/main/connections.c:5030msgid "using a text-mode 'file' connection may not work correctly"msgstr "使用某個文字模式 'file' 連結可能不會正確作用"#: src/main/connections.c:5033msgid """cannot create a gzcon connection from a writable textConnection; maybe use ""rawConnection"msgstr ""#: src/main/connections.c:5036 src/main/connections.c:5040#: src/main/connections.c:5047 src/main/connections.c:5061msgid "allocation of 'gzcon' connection failed"msgstr "指派 'gzcon' 連結失敗"#: src/main/connections.c:5221msgid "not a list of sockets"msgstr "非插槽串列"#: src/main/connections.c:5226msgid "bad write indicators"msgstr "寫入指示器不正確"#: src/main/connections.c:5237msgid "not a socket connection"msgstr "非插槽連結"#: src/main/connections.c:5458msgid "unknown compression, assuming none"msgstr ""#: src/main/context.c:125msgid """bad target context--should NEVER happen;\n""please bug.report() [R_run_onexits]"msgstr """目的上下文發生錯誤，這不應該發生；\n""請用 bug.report() [R_run_onexits]"#: src/main/context.c:283msgid "no loop to break from, jumping to top level"msgstr "沒有可插斷的循環, 跳到最高層"#: src/main/context.c:291msgid "no function to return from, jumping to top level"msgstr "沒有可回返的函數, 跳到最高層"#: src/main/context.c:303msgid "target context is not on the stack"msgstr "目的上下文不在堆疊上"#: src/main/context.c:325 src/main/context.c:341 src/main/context.c:408#: src/main/context.c:429 src/main/context.c:441 src/main/context.c:453msgid "not that many frames on the stack"msgstr "堆疊上沒有這麼多的框格"#: src/main/context.c:358msgid "only positive values of 'n' are allowed"msgstr "'n' 只允許是正數"#: src/main/context.c:479msgid "no function to restart"msgstr "沒有重新開始的功能"#: src/main/context.c:516#, fuzzymsgid "number of contexts must be positive"msgstr "'maxiter' 必須是正數"#: src/main/context.c:529msgid "no browser context to query"msgstr ""#: src/main/context.c:547#, fuzzymsgid "not that many calls to browser are active"msgstr "堆疊上沒有這麼多的框格"#: src/main/context.c:561#, fuzzymsgid "not that many functions on the call stack"msgstr "堆疊上沒有這麼多的框格"#: src/main/context.c:646msgid "internal error in 'do_sys'"msgstr "內部錯誤 'do_sys'"#: src/main/cov.c:540msgid "missing observations in cov/cor"msgstr "cov/cor 中有漏失值"#: src/main/cov.c:624#, fuzzymsgid "'x' is NULL"msgstr "'x' 是空的"#: src/main/cov.c:645 src/main/cov.c:651msgid "incompatible dimensions"msgstr "不相容的維度"#: src/main/cov.c:683msgid "invalid 'use' (computational method)"msgstr "'use' 不正確 (計算方法)"#: src/main/cov.c:686msgid "'x' is empty"msgstr "'x' 是空的"#: src/main/cov.c:711 src/main/cov.c:744msgid "no complete element pairs"msgstr ""#: src/main/cov.c:780msgid "the standard deviation is zero"msgstr "標準差為零"#: src/main/cum.c:49#, fuzzymsgid "Integer overflow in 'cumsum'; use 'cumsum(as.numeric(.))'"msgstr "sum(.) 中整數上溢；請用 sum(as.numeric(.))"#: src/main/cum.c:182msgid "min/max not defined for complex numbers"msgstr "min/max 不能適用於複數"#: src/main/cum.c:185 src/main/cum.c:206 src/main/cum.c:229msgid "unknown cumxxx function"msgstr "不明的 cumxxx 功能"#: src/main/datetime.c:510 src/main/datetime.c:516 src/main/datetime.c:530#: src/main/datetime.c:535#, fuzzymsgid "problem with setting timezone"msgstr "寫入連結有問題"#: src/main/datetime.c:520msgid "cannot set timezones on this system"msgstr "無法為本系統設定時區"#: src/main/datetime.c:542 src/main/datetime.c:544#, fuzzymsgid "problem with unsetting timezone"msgstr "啟動編輯器 %s 時出了問題"#: src/main/datetime.c:680 src/main/datetime.c:682 src/main/datetime.c:1074#: src/main/datetime.c:1076msgid "zero length component in non-empty POSIXlt structure"msgstr "非空的 POSIXlt 結構內含長度為零的成分"#: src/main/dcf.c:64 src/main/dcf.c:122 src/main/dcf.c:175msgid "could not allocate memory for 'read.dcf'"msgstr "無法為 'read.dcf' 指派記憶體"#: src/main/dcf.c:106#, c-formatmsgid "Found continuation line starting '%s ...' at begin of record."msgstr ""#: src/main/dcf.c:190#, c-formatmsgid "Line starting '%s ...' is malformed!"msgstr ""#: src/main/debug.c:43#, fuzzymsgid "argument must be a closure"msgstr "第二引數必須是函數"#: src/main/debug.c:74#, fuzzymsgid "argument must be a function"msgstr "第二引數必須是函數"#: src/main/debug.c:127 src/main/debug.c:161 src/main/debug.c:219#, fuzzymsgid "argument must not be a function"msgstr "第二引數必須是函數"#: src/main/debug.c:130msgid "cannot trace NULL"msgstr ""#: src/main/debug.c:134msgid "'tracemem' is not useful for promise and environment objects"msgstr ""#: src/main/debug.c:137msgid "'tracemem' is not useful for weak reference or external pointer objects"msgstr ""#: src/main/debug.c:143 src/main/debug.c:166msgid "R was not compiled with support for memory profiling"msgstr ""#: src/main/deparse.c:150 src/main/plot.c:912 src/main/plot.c:1451#: src/main/plot.c:1774 src/main/plot.c:1842 src/main/plot.c:1921#: src/main/plot.c:1995 src/main/plot.c:2071 src/main/plot.c:2169#: src/main/plot.c:2247 src/main/plot.c:2528 src/main/plot.c:2706#: src/main/plot.c:2925 src/main/plot.c:3469 src/main/plot.c:3597#: src/main/plot.c:3676 src/main/plot.c:3847 src/main/plot.c:4124#: src/main/plot3d.c:1360 src/main/sprintf.c:211 src/main/sprintf.c:243msgid "too few arguments"msgstr "引數數目太少"#: src/main/deparse.c:157msgid "invalid 'cutoff' for deparse, using default"msgstr "deparse的 'cutoff' 值不正確，用預設值"#: src/main/deparse.c:236msgid "deparse of an S4 object will not be source()able"msgstr ""#: src/main/deparse.c:238msgid "deparse may be incomplete"msgstr "deparse 可能不完整"#: src/main/deparse.c:240msgid "deparse may be not be source()able in R < 2.7.0"msgstr ""#: src/main/deparse.c:324 src/main/deparse.c:414 src/main/deparse.c:420msgid "wrote too few characters"msgstr "字元寫得不夠"#: src/main/deparse.c:345msgid "character arguments expected"msgstr "需要字元引數"#: src/main/deparse.c:348msgid "zero length argument"msgstr "引數長度為零"#: src/main/deparse.c:355#, fuzzymsgid "'opts' should be small non-negative integer"msgstr "'gap' 必須是正整數"#: src/main/deparse.c:365 src/main/envir.c:1692 src/main/envir.c:1774#: src/main/eval.c:423 src/main/eval.c:909 src/main/eval.c:2795#: src/main/saveload.c:1965 src/main/saveload.c:2282 src/main/serialize.c:2282#, c-formatmsgid "object '%s' not found"msgstr "找不到目的物件 '%s'"#: src/main/deparse.c:1423msgid "badly formed function expression"msgstr "不當形式的函數敘述"#: src/main/deriv.c:119msgid "invalid form in unary minus check"msgstr "檢查一元減號時發現形式不正確"#: src/main/deriv.c:526#, c-formatmsgid "Function '%s' is not in the derivatives table"msgstr "微分表中沒有這個函數 '%s'"#: src/main/deriv.c:633msgid "variable must be a character string"msgstr "變數必須是字串"#: src/main/deriv.c:635 src/main/envir.c:1515msgid "only the first element is used as variable name"msgstr "只用了第一個元素做為變數名"#: src/main/deriv.c:648#, fuzzy, c-formatmsgid "invalid expression in '%s'"msgstr "\"%s\" 的運算式不正確"#: src/main/deriv.c:923 src/main/model.c:1319msgid "invalid variable names"msgstr "變數名稱不正確"#: src/main/deriv.c:932msgid "invalid tag"msgstr "標籤不正確"#: src/main/devices.c:152 src/main/devices.c:159msgid "no active or default device"msgstr "沒有在使用中的或預設的裝置"#: src/main/devices.c:355msgid "argument must have positive length"msgstr "引數的長度必須是正數"#: src/main/devices.c:430 src/main/devices.c:492msgid "too many open devices"msgstr "太多已經開啟的裝置"#: src/main/devices.c:519#, fuzzymsgid "not enough memory to allocate device (in GEcreateDevDesc)"msgstr "指派裝置記憶體不足 (於 addDevice)"#: src/main/devices.c:566msgid "Hit <Return> to see next plot: "msgstr "按 <return> 鍵來看下一張圖: "#: src/main/dotcode.c:107 src/main/dotcode.c:137msgid "NULL value passed as symbol address"msgstr "NULL 值被當作符號位址"#: src/main/dotcode.c:142 src/main/dotcode.c:212#, fuzzy, c-formatmsgid "symbol '%s' is too long"msgstr "DLLname '%s' 太長"#: src/main/dotcode.c:160msgid "'name' must be a string (of length 1) or native symbol reference"msgstr "'name' 必須是字串 (長度為 1) 或是原生符號參照"#: src/main/dotcode.c:199 src/main/dotcode.c:823msgid "too many arguments in foreign function call"msgstr "外接函數呼叫時引數太多"#: src/main/dotcode.c:241#, c-formatmsgid "%s symbol name \"%s\" not in DLL for package \"%s\""msgstr "套件 \"%3$s\" 的 DLL 中沒有 %1$s 的符號名稱 \"%2$s\""#: src/main/dotcode.c:245#, c-formatmsgid "%s symbol name \"%s\" not in load table"msgstr "載入表中沒有 %s 的符號名稱 \"%s\""#: src/main/dotcode.c:307#, c-formatmsgid """explicit request not to duplicate arguments in call to '%s', but argument %d ""is of the wrong type (%d != %d)"msgstr "呼叫 '%s' 時明確要求不要複製引數，但引數 %d 的類型不正確 (%d != %d)"#: src/main/dotcode.c:333#, c-formatmsgid "NAs in foreign function call (arg %d)"msgstr "外部函數呼叫時不能有 NA (引數 %d)"#: src/main/dotcode.c:347#, c-formatmsgid "NA/NaN/Inf in foreign function call (arg %d)"msgstr "外部函數呼叫時不能有 NA/NaN/Inf (引數 %d)"#: src/main/dotcode.c:369#, c-formatmsgid "complex NA/NaN/Inf in foreign function call (arg %d)"msgstr "外部函數呼叫時不能有複數的 NA/NaN/Inf (引數 %d)"#: src/main/dotcode.c:379msgid "character variables must be duplicated in .C/.Fortran"msgstr "在呼叫 .C/.Fortran 時字元變數必須被複製"#: src/main/dotcode.c:384msgid "only first string in char vector used in .Fortran"msgstr ".Fortran 只用了位元組向量中的第一個字串"#: src/main/dotcode.c:397 src/main/dotcode.c:523#, c-formatmsgid "unsupported encoding '%s'"msgstr "不支援這個編碼 '%s'"#: src/main/dotcode.c:412#, c-formatmsgid "conversion problem in re-encoding to '%s'"msgstr "轉換編碼 '%s' 時出了問題"#: src/main/dotcode.c:430#, fuzzymsgid "lists must be duplicated in .C"msgstr "在呼叫 .C/.Fortran 時字元變數必須被複製"#: src/main/dotcode.c:440 src/main/dotcode.c:452#, c-formatmsgid "invalid mode to pass to Fortran (arg %d)"msgstr "傳給 Fortran 的狀態發生錯誤 (引數 %d)"#: src/main/dotcode.c:537#, c-formatmsgid "conversion problem in re-encoding from '%s'"msgstr "轉換編碼成 '%s' 出了問題"#: src/main/dotcode.c:603msgid "NAOK used more than once"msgstr "NAOK 被使用超過一次"#: src/main/dotcode.c:607msgid "DUP used more than once"msgstr "DUP 被使用超過一次"#: src/main/dotcode.c:613msgid "DLL name is too long"msgstr "DLL 的名稱太長"#: src/main/dotcode.c:616 src/main/dotcode.c:676 src/main/dotcode.c:682msgid "PACKAGE used more than once"msgstr "PACKAGE 被使用超過一次"#: src/main/dotcode.c:655msgid "PACKAGE argument must be a single character string"msgstr "PACKAGE 引數必須是單字元字串"#: src/main/dotcode.c:661msgid "PACKAGE argument is too long"msgstr "PACKAGE 引數太長"#: src/main/dotcode.c:705 src/main/dotcode.c:713msgid "ENCODING used more than once"msgstr "ENCODING 被使用超過一次"#: src/main/dotcode.c:707 src/main/dotcode.c:715msgid "ENCODING argument must be a single character string"msgstr "ENCODING 引數必須是單字元字串"#: src/main/dotcode.c:732msgid "no arguments supplied"msgstr "沒有提供引數"#: src/main/dotcode.c:733 src/main/seq.c:640msgid "too many arguments"msgstr "引數太多"#: src/main/dotcode.c:786 src/main/dotcode.c:830 src/main/dotcode.c:1658#, c-formatmsgid "Incorrect number of arguments (%d), expecting %d for %s"msgstr "引數數目不正確 (%1$d), %3$s 只需要 %2$d 個引數"#: src/main/dotcode.c:1487 src/main/dotcode.c:2290msgid "too many arguments, sorry"msgstr "對不起，引數太多"#: src/main/dotcode.c:1519 src/main/dotcode.c:1536msgid "Invalid graphics state"msgstr "繪圖狀態發生錯誤"#: src/main/dotcode.c:1609msgid "NULL value for DLLInfoReference when looking for DLL"msgstr "尋找 DLL 時 DLLInfoReference 的值是 NULL"#: src/main/dotcode.c:1683#, c-formatmsgid "Wrong type for argument %d in call to %s"msgstr "呼叫 %2$s 時引數 %1$d 的類型不正確"#: src/main/dotcode.c:2384#, c-formatmsgid "type \"%s\" not supported in interlanguage calls"msgstr "語言間呼叫不支援此一類型 \"%s\""#: src/main/dotcode.c:2396msgid "invalid function in call_R"msgstr "call_R 中的函數不正確"#: src/main/dotcode.c:2398msgid "invalid argument count in call_R"msgstr "call_R 的引數數目不正確"#: src/main/dotcode.c:2400msgid "invalid return value count in call_R"msgstr "call_R 的回傳值數目不正確"#: src/main/dotcode.c:2443#, c-formatmsgid "mode '%s' is not supported in call_R"msgstr "call_R 不支援 '%s' 型式"#: src/main/dounzip.c:109#, fuzzy, c-formatmsgid " not overwriting file '%s"msgstr "無法開啟檔案 '%s'"#: src/main/dounzip.c:188#, fuzzy, c-formatmsgid "zip file '%s' cannot be opened"msgstr "無法載入 lapack 例行程式"#: src/main/dounzip.c:240msgid "invalid zip name argument"msgstr "zip 名稱引數不正確"#: src/main/dounzip.c:243 src/main/dounzip.c:332msgid "zip path is too long"msgstr "zip 路徑太長"#: src/main/dounzip.c:260msgid "'destination' is too long"msgstr "'destination' 太長"#: src/main/dounzip.c:263msgid "'destination' does not exist"msgstr "'destination' 不存在"#: src/main/dounzip.c:287msgid "requested file not found in the zip file"msgstr "您所要求的檔案在 zip 檔案中沒有"#: src/main/dounzip.c:290msgid "zip file is corrupt"msgstr "zip 檔案有損壞"#: src/main/dounzip.c:293msgid "CRC error in zip file"msgstr "zip 檔案出現 CRC 錯誤"#: src/main/dounzip.c:297msgid "internal error in unz code"msgstr "unz 程式碼中有內部錯誤"#: src/main/dounzip.c:300msgid "write error in extracting from zip file"msgstr "抽取 zip 檔案時出了寫入錯誤"#: src/main/dounzip.c:303#, c-formatmsgid "error %d in extracting from zip file"msgstr "從 zip 檔案中解開 %d 時發生錯誤"#: src/main/dounzip.c:327msgid "unz connections can only be opened for reading"msgstr "unz 連結可讀不可寫"#: src/main/dounzip.c:338msgid "invalid description of unz connection"msgstr "unz 連結的描述不正確"#: src/main/dounzip.c:344#, c-formatmsgid "cannot open zip file '%s'"msgstr "無法開啟 zip 檔案 '%s'"#: src/main/dounzip.c:348#, c-formatmsgid "cannot locate file '%s' in zip file '%s'"msgstr "找不到在 zip 檔案 '%2$s' 中的 %1$s 檔案"#: src/main/dounzip.c:392msgid "printing not enabled for this connection"msgstr "此連結無法列印"#: src/main/dounzip.c:399msgid "write not enabled for this connection"msgstr "無法寫入這個連結"#: src/main/dounzip.c:419 src/main/dounzip.c:423 src/main/dounzip.c:429#: src/main/dounzip.c:446msgid "allocation of unz connection failed"msgstr "指派 unz 連結失敗"#: src/main/dstruct.c:59msgid "invalid formal arguments for \"function\""msgstr "\"function\" 的正式引數不正確"#: src/main/dstruct.c:71msgid """invalid body argument for \"function\"\n""Should NEVER happen; please bug.report() [mkCLOSXP]"msgstr """\"function\" 主體引數不正確。這不應該發生，請用 bug.report() [mkCLOSXP]"#: src/main/engine.c:39msgid "Graphics API version mismatch"msgstr "繪圖 API 版本不相符"#: src/main/engine.c:112 src/main/engine.c:117 src/main/engine.c:181msgid "unable to allocate memory (in GEregister)"msgstr "無法指派記憶體 (於 GEregister)"#: src/main/engine.c:152msgid "too many graphics systems registered"msgstr "登記了太多的繪圖系統"#: src/main/engine.c:199msgid "no graphics system to unregister"msgstr "沒有可以取消登記的繪圖系統"#: src/main/engine.c:434 src/main/engine.c:439 src/main/engine.c:447#: src/main/engine.c:454 src/main/engine.c:468 src/modules/X11/devX11.c:988msgid "invalid line end"msgstr "列終點發生錯誤"#: src/main/engine.c:499 src/main/engine.c:504 src/main/engine.c:512#: src/main/engine.c:519 src/main/engine.c:533 src/modules/X11/devX11.c:1006msgid "invalid line join"msgstr "列接合發生錯誤"#: src/main/engine.c:787msgid "out of memory while clipping polyline"msgstr "剪裁多邊形的時候記憶體不足"#: src/main/engine.c:1377#, fuzzymsgid "Invalid graphics path"msgstr "繪圖狀態發生錯誤"#: src/main/engine.c:1608#, c-formatmsgid "font face %d not supported for font family '%s'"msgstr "字模家族 '%2$s' 中沒有字模 %1$d"#: src/main/engine.c:1920msgid "no graphics device is active"msgstr "沒有活動中的繪圖裝置"#: src/main/engine.c:1998#, fuzzy, c-formatmsgid "pch value '%d' is invalid in this locale"msgstr "'pattern' 的值在本語言環境下不正確"#: src/main/engine.c:2255#, c-formatmsgid "unimplemented pch value '%d'"msgstr "尚未實作pch '%d' 的值"#: src/main/engine.c:2278#, c-formatmsgid "invalid axis extents [GEPretty(.,.,n=%d)"msgstr "座標範圍不正確 [GEPretty(.,.,n=%d)"#: src/main/engine.c:2282#, c-formatmsgid "infinite axis extents [GEPretty(%g,%g,%d)]"msgstr "無限的座標範圍值 [GEPretty(%g,%g,%d)]"#: src/main/engine.c:2320#, c-formatmsgid " .. GEPretty(.): new *lo = %g < %g = x1"msgstr " .. GEPretty(.): new *lo =%g <%g = x1"#: src/main/engine.c:2322#, c-formatmsgid " .. GEPretty(.): new *up = %g > %g = x2"msgstr " .. GEPretty(.): new *up =%g >%g = x2"#: src/main/engine.c:2651msgid "Display list redraw incomplete"msgstr "顯示串列重新整理時不完整"#: src/main/engine.c:2835msgid "'expr' argument must be an expression"msgstr "'expr' 引數必須是運算式"#: src/main/engine.c:2837msgid "'list' argument must be a list"msgstr "'list' 引數必須是串列"#: src/main/engine.c:2843msgid "'env' argument must be an environment"msgstr "'env' 引數必須是環境物件"#: src/main/engine.c:2865 src/main/graphics.c:2395msgid "invalid graphics state"msgstr "繪圖狀態不正確"#: src/main/engine.c:2923 src/main/engine.c:2931msgid "invalid multibyte char in pch=\"c\""msgstr "pch=\"c\" 中的多位元組字元不正確"#: src/main/engine.c:3001msgid "invalid line type: must be length 2, 4, 6 or 8"msgstr "無效的列類型: 長度必須是 2, 4, 6 或 8"#: src/main/engine.c:3005#, fuzzymsgid "invalid line type: zeroes are not allowed"msgstr "不允許負長度的向量"#: src/main/engine.c:3014 src/main/engine.c:3022 src/main/engine.c:3029msgid "invalid line type"msgstr "無效的列類型"#: src/main/envir.c:111 src/main/envir.c:123#, fuzzy, c-formatmsgid "cannot change value of locked binding for '%s'"msgstr "無法變更鎖定繫結的值"#: src/main/envir.c:228 src/main/envir.c:1360msgid "cannot add bindings to a locked environment"msgstr "無法給鎖定環境加上繫結"#: src/main/envir.c:717msgid "invalid cached value in R_GetGlobalCache"msgstr "R_GetGlobalCache 中的快取值不正確"#: src/main/envir.c:771msgid "cannot unbind in the base namespace"msgstr "無法在基本命名空間中切斷繫結"#: src/main/envir.c:773#, fuzzymsgid "unbind in the base environment is unimplemented"msgstr "無法在基本環境中切斷繫結"#: src/main/envir.c:775 src/main/envir.c:1615msgid "cannot remove bindings from a locked environment"msgstr "無法從鎖定的環境中刪除繫結"#: src/main/envir.c:1067#, fuzzy, c-formatmsgid "argument to '%s' is not an environment"msgstr "用於 %s 的引數不是環境物件"#: src/main/envir.c:1227#, c-formatmsgid "The ... list does not contain %d elements"msgstr "... 串列不包含 %d 個元素"#: src/main/envir.c:1229#, c-formatmsgid "..%d used in an incorrect context, no ... to look in"msgstr "..%d 所用的上下文發生錯誤, 找不到..."#: src/main/envir.c:1300 src/main/envir.c:1770 src/main/eval.c:427#: src/main/eval.c:2798#, c-formatmsgid "argument \"%s\" is missing, with no default"msgstr "缺少引數 \"%s\"，也沒有預設值"#: src/main/envir.c:1305#, c-formatmsgid "could not find function \"%s\""msgstr "沒有這個函數 \"%s\""#: src/main/envir.c:1328msgid "cannot assign values in the empty environment"msgstr "無法在空環境中指定值"#: src/main/envir.c:1334 src/main/envir.c:1403msgid "cannot assign variables to this database"msgstr "無法給這個資料庫指定變數"#: src/main/envir.c:1486#, fuzzy, c-formatmsgid "cannot add binding of '%s' to the base environment"msgstr "無法給鎖定環境加上繫結"#: src/main/envir.c:1554#, fuzzymsgid "first argument must be a named list"msgstr "第一個引數必須是串列"#: src/main/envir.c:1559#, fuzzymsgid "names(x) must be valid character(length(x))."msgstr "'names' 必須是字元向量"#: src/main/envir.c:1566#, fuzzy, c-formatmsgid "'%s' must be an environment"msgstr "'enclos' 必須是環境物件"#: src/main/envir.c:1579#, fuzzy, c-formatmsgid "invalid '%s' argument: must be NULL or environment"msgstr "'env' 引數必須是環境物件"#: src/main/envir.c:1609msgid "cannot remove variables from base namespace"msgstr "無法從基本名稱空間刪除變數"#: src/main/envir.c:1611#, fuzzymsgid "cannot remove variables from the base environment"msgstr "無法從空環境中刪除變數"#: src/main/envir.c:1613msgid "cannot remove variables from the empty environment"msgstr "無法從空環境中刪除變數"#: src/main/envir.c:1621msgid "cannot remove variables from this database"msgstr "無法從這個資料庫中刪除變數"#: src/main/envir.c:1777#, fuzzy, c-formatmsgid "object '%s' of mode '%s' was not found"msgstr "沒有狀態是 \"%2$s\" 的變數 \"%1$s\""#: src/main/envir.c:1850#, c-formatmsgid "invalid name in position %d"msgstr "在 %d 位置的名稱不正確"#: src/main/envir.c:1858msgid "second argument must be an environment"msgstr "第二引數必須是環境物件"#: src/main/envir.c:1866 src/main/envir.c:1874#, fuzzy, c-formatmsgid "wrong length for '%s' argument"msgstr "'mode' 引數的長度不正確"#: src/main/envir.c:2009#, fuzzymsgid "invalid use of 'missing'"msgstr "missing 的使用方式不正確"#: src/main/envir.c:2034#, fuzzymsgid "'missing' can only be used for arguments"msgstr "missing 只能用於這些引數"#: src/main/envir.c:2115#, fuzzymsgid "'pos' must be an integer"msgstr "'a' 和 'b' 的值必須是有限的"#: src/main/envir.c:2129#, fuzzymsgid "all elements of a list must be named"msgstr "attach: 所有的元素都必須有名稱"#: src/main/envir.c:2152#, fuzzymsgid "'attach' only works for lists, data frames and environments"msgstr "attach 只適用於串列和資料框"#: src/main/envir.c:2235msgid "detaching \"package:base\" is not allowed"msgstr "\"package:base\" 不能被拆離"#: src/main/envir.c:2536 src/main/envir.c:2591msgid "argument must be an environment"msgstr "引數必須是環境物件"#: src/main/envir.c:2595msgid "arguments must be symbolic"msgstr "引數必須為符號"#: src/main/envir.c:2709 src/main/random.c:34 src/main/random.c:568msgid "invalid arguments"msgstr "引數不正確"#: src/main/envir.c:2767msgid "no enclosing environment"msgstr "沒有封閉的環境"#: src/main/envir.c:2817#, c-formatmsgid "no item called \"%s\" on the search list"msgstr "搜尋串列中沒有所謂的 \"%s\" 項目"#: src/main/envir.c:2840msgid "using 'as.environment(NULL)' is defunct"msgstr "'as.environment(NULL)' 已廢止使用"#: src/main/envir.c:2846#, fuzzymsgid "S4 object does not extend class \"environment\""msgstr "替換目的物件不是環境物件"#: src/main/envir.c:2857#, fuzzymsgid "invalid object for 'as.environment'"msgstr "as.environment 的目的物件不正確"#: src/main/envir.c:2883 src/main/envir.c:2911 src/main/envir.c:2940#: src/main/envir.c:2961 src/main/envir.c:2983 src/main/envir.c:3017#: src/main/envir.c:3037msgid "not an environment"msgstr "不是環境物件"#: src/main/envir.c:2935 src/main/envir.c:2956 src/main/envir.c:2977#: src/main/envir.c:3013 src/main/envir.c:3033 src/main/envir.c:3131msgid "not a symbol"msgstr "不是符號"#: src/main/envir.c:2948 src/main/envir.c:2969 src/main/envir.c:3025#: src/main/envir.c:3045#, c-formatmsgid "no binding for \"%s\""msgstr "沒有 \"%s\" 繫結"#: src/main/envir.c:2979msgid "not a function"msgstr "不是函數"#: src/main/envir.c:2986 src/main/envir.c:3002msgid "symbol already has a regular binding"msgstr "符號已經有了正式繫結"#: src/main/envir.c:2988 src/main/envir.c:3004#, fuzzymsgid "cannot change active binding if binding is locked"msgstr "無法變更鎖定繫結的值"#: src/main/envir.c:3090msgid "unknown op"msgstr "沒有這種運算子"#: src/main/envir.c:3135msgid "cannot unbind a locked binding"msgstr "無法切斷已經鎖定的繫結"#: src/main/envir.c:3137msgid "cannot unbind an active binding"msgstr "無法切斷正在使用中的繫結"#: src/main/envir.c:3272msgid "bad name space name"msgstr "不當的名稱空間名稱"#: src/main/envir.c:3284msgid "name space already registered"msgstr "名稱空間已經登記"#: src/main/envir.c:3296msgid "name space not registered"msgstr "名稱空間沒有登記"#: src/main/envir.c:3342msgid "bad import environment argument"msgstr "不當導入環境引數"#: src/main/envir.c:3346msgid "bad export environment argument"msgstr "不當導出環境引數"#: src/main/envir.c:3350msgid "length of import and export names must match"msgstr "導入和導出名稱的長度必須相等"#: src/main/envir.c:3373#, c-formatmsgid "exported symbol '%s' has no value"msgstr "導出的符號 '%s' 沒有值"#: src/main/envir.c:3558#, fuzzy, c-formatmsgid "unknown encoding: %d"msgstr "不支援這個編碼 '%s'"#: src/main/envir.c:3574#, c-formatmsgid "embedded nul in string: '%s'"msgstr ""#: src/main/errors.c:147 src/main/errors.c:184msgid "interrupts suspended; signal ignored"msgstr "暫停被中斷; 信號忽略不用"#: src/main/errors.c:277msgid "invalid option \"warning.expression\""msgstr "\"warning.expression\" 選項不正確"#: src/main/errors.c:307#, c-formatmsgid "(converted from warning) %s"msgstr "(從警告轉換成) %s"#: src/main/errors.c:318#, fuzzy, c-formatmsgid "Warning: %s\n"msgstr "警告: "#: src/main/errors.c:321 src/main/errors.c:323#, fuzzy, c-formatmsgid "Warning in %s : %s\n"msgstr "%s 中的警告: "#: src/main/errors.c:325#, fuzzy, c-formatmsgid """Warning in %s :\n"" %s\n"msgstr "%s 中的警告: "#: src/main/errors.c:389 src/main/errors.c:407 src/main/errors.c:531msgid "Lost warning messages\n"msgstr "警告訊息遺失\n"#: src/main/errors.c:419#, fuzzymsgid "Warning message:\n"msgid_plural "Warning messages:\n"msgstr[0] "警告訊息遺失\n"#: src/main/errors.c:474#, c-formatmsgid "There were %d warnings (use warnings() to see them)\n"msgstr "共有 %d 個警告 (用 warnings() 來顯示)\n"#: src/main/errors.c:477msgid "There were 50 or more warnings (use warnings() to see the first 50)\n"msgstr "警告多於50個 (用 warnings() 來顯示最先的50個)\n"#: src/main/errors.c:522msgid "Error during wrapup: "msgstr "收捲時發生錯誤: "#: src/main/errors.c:547msgid "Error in "msgstr "錯誤在"#: src/main/errors.c:572 src/main/errors.c:577#, c-formatmsgid "Error: "msgstr "錯誤: "#: src/main/errors.c:596 src/main/errors.c:1219msgid "In addition: "msgstr "此外: "#: src/main/errors.c:717msgid "invalid option \"error\"\n"msgstr "選項 \"error\" 不正確\n"#: src/main/errors.c:797msgid "Execution halted\n"msgstr "停止執行\n"#: src/main/errors.c:932#, fuzzy, c-formatmsgid "invalid '%s' arguemnt"msgstr "'%s' 引數不正確"#: src/main/errors.c:934msgid "'msg1' must be a character string"msgstr "'msg1' 必須是字串"#: src/main/errors.c:936msgid "'msg2' must be a character string"msgstr "'msg2' 必須是字串"#: src/main/errors.c:1031msgid " [invalid string in stop(.)]"msgstr " [stop(.) 中的字串不正確]"#: src/main/errors.c:1057msgid " [invalid string in warning(.)]"msgstr " [warning(.) 中的字串不正確]"#: src/main/errors.c:1072#, c-formatmsgid "incorrect number of arguments to \"%s\""msgstr "\"%s\" 中的引數數目不正確"#: src/main/errors.c:1078 src/main/errors.c:1093#, c-formatmsgid "unimplemented feature in %s"msgstr "%s 中的功能尚未實作"#: src/main/errors.c:1087msgid "invalid number of arguments"msgstr "引數數目不正確"#: src/main/errors.c:1090msgid "time-series/vector length mismatch"msgstr "時間序列/向量長度不等"#: src/main/errors.c:1091msgid "incompatible arguments"msgstr "不相容的引數"#: src/main/errors.c:1094msgid "unknown error (report this!)"msgstr "不明錯誤 (請報告!)"#: src/main/errors.c:1106msgid "unknown warning (report this!)"msgstr "不明警告 (請報告!)"#: src/main/errors.c:1184msgid "No function to return from, jumping to top level"msgstr "沒有可回返的函數, 跳到最高層"#: src/main/errors.c:1200msgid "top level inconsistency?"msgstr "最高層不一致？"#: src/main/errors.c:1363msgid "bad handler data"msgstr "不當的控柄資料"#: src/main/errors.c:1513msgid "error message not a string"msgstr "錯誤訊息不是字串"#: src/main/errors.c:1588msgid "handler or restart stack mismatch in old restart"msgstr "舊重新啟動中的控柄或重新啟動堆疊不符合"#: src/main/errors.c:1614 src/main/errors.c:1630msgid "bad error message"msgstr "不當的錯誤訊息"#: src/main/errors.c:1672msgid "bad restart"msgstr "不當的重新啟動"#: src/main/errors.c:1704msgid "restart not on stack"msgstr "未在堆疊上重新啟動"#: src/main/errors.c:1721msgid "not in a try context"msgstr "不在 try 的上下文中"#: src/main/errors.c:1734#, fuzzymsgid "error message must be a character string"msgstr "'msg1' 必須是字串"#: src/main/eval.c:234#, c-formatmsgid "Rprof: cannot open profile file '%s'"msgstr "Rprof: 打不開程式概要分析檔案 '%s'"#: src/main/eval.c:275msgid "can't use R profiling while byte code profiling"msgstr "在位元組碼程式概要分析時不能用 R 來同時進行程式概要分析"#: src/main/eval.c:295msgid "R profiling is not available on this system"msgstr "本系統沒有 R 程式概要分析這個功能"#: src/main/eval.c:319msgid """promise already under evaluation: recursive default argument reference or ""earlier problems?"msgstr ""#: src/main/eval.c:321#, fuzzymsgid "restarting interrupted promise evaluation"msgstr "'eval' 不支援重新啟動"#: src/main/eval.c:367msgid """evaluation nested too deeply: infinite recursion / options(expressions=)?"msgstr "評估巢狀太深：無窮遞迴/選項(表示式=)?"#: src/main/eval.c:429 src/main/eval.c:2799msgid "argument is missing, with no default"msgstr "缺少引數, 也沒有預設值"#: src/main/eval.c:512 src/main/eval.c:3316msgid "attempt to apply non-function"msgstr "不適用於非函數"#: src/main/eval.c:535#, c-formatmsgid "%s at %s#%d: "msgstr ""#: src/main/eval.c:837#, c-formatmsgid "could not find symbol \"%s\" in environment of the generic function"msgstr "一般函數環境中沒有 \"%s\" 符號"#: src/main/eval.c:855#, c-formatmsgid "symbol \"%s\" not in environment of method"msgstr "方法環境中沒有 \"%s\" 符號"#: src/main/eval.c:964msgid "the condition has length > 1 and only the first element will be used"msgstr "條件的長度 > 1，因此只能用其第一元素"#: src/main/eval.c:981msgid "missing value where TRUE/FALSE needed"msgstr "需要 TRUE/FALSE 值的地方有缺值"#: src/main/eval.c:982msgid "argument is not interpretable as logical"msgstr "引數無法解譯為邏輯值"#: src/main/eval.c:983msgid "argument is of length zero"msgstr "引數長度為零"#: src/main/eval.c:1042msgid "non-symbol loop variable"msgstr "非符號循環變數"#: src/main/eval.c:1132msgid "invalid for() loop sequence"msgstr "不當的 for() 循環序列"#: src/main/eval.c:1265#, fuzzymsgid "multi-argument returns are not permitted"msgstr "已不再使用多引數回傳值此一功能"#: src/main/eval.c:1313msgid "invalid (NULL) left side of assignment"msgstr "賦值公式左側是無效 (NULL) 值"#: src/main/eval.c:1335msgid "target of assignment expands to non-language object"msgstr "賦值目標擴充到非語言的物件"#: src/main/eval.c:1380msgid "cannot do complex assignments in base namespace"msgstr "無法在基本名稱空間中賦予複數值"#: src/main/eval.c:1382msgid "cannot do complex assignments in base environment"msgstr "無法在基本環境中賦予複數值"#: src/main/eval.c:1402 src/main/eval.c:1420msgid "invalid function in complex assignment"msgstr "複數賦值中的函數不正確"#: src/main/eval.c:1404 src/main/eval.c:1422#, c-formatmsgid "overlong name in '%s'"msgstr "'%s' 中的名稱太長"#: src/main/eval.c:1503msgid "invalid (do_set) left-hand side to assignment"msgstr "(do_set) 賦值公式左側不正確"#: src/main/eval.c:1518msgid "invalid assignment left-hand side"msgstr "賦值公式左側不正確"#: src/main/eval.c:1578#, fuzzy, c-formatmsgid "argument %d is empty"msgstr "引數 %d 不是向量"#: src/main/eval.c:1581#, c-formatmsgid "'%s' is missing"msgstr ""#: src/main/eval.c:1713msgid "invalid formal argument list for \"function\""msgstr "\"function\" 正式引數串列不正確"#: src/main/eval.c:1794msgid "numeric 'envir' arg not of length one"msgstr "數值 'envir' 引數的長度不是 1"#: src/main/eval.c:1816 src/main/eval.c:1835msgid "restarts not supported in 'eval'"msgstr "'eval' 不支援重新啟動"#: src/main/eval.c:1904 src/main/eval.c:1917msgid "'Recall' called from outside a closure"msgstr "'Recall' 從閉包外部呼叫"#: src/main/eval.c:2007msgid "value in '...' is not a promise"msgstr "'...' 中的值不是一個約定"#: src/main/eval.c:2192 src/main/objects.c:709#, c-formatmsgid "call name too long in '%s'"msgstr "'%s' 中呼叫的名稱太長"#: src/main/eval.c:2213#, c-formatmsgid "generic name too long in '%s'"msgstr "'%s' 中的一般名稱太長"#: src/main/eval.c:2276#, c-formatmsgid "Incompatible methods (\"%s\", \"%s\") for \"%s\""msgstr "不相容的方法 (\"%s\", \"%s\") 用於 \"%s\""#: src/main/eval.c:2340#, fuzzymsgid "dispatch error in group dispatch"msgstr "分派錯誤"#: src/main/eval.c:2722msgid "node stack overflow"msgstr "節點堆疊向上溢位"#: src/main/eval.c:2728msgid "integer stack overflow"msgstr "整數堆疊向上溢位"#: src/main/eval.c:2781msgid "Bad opcode"msgstr "不當的操作代碼"#: src/main/eval.c:2930msgid "not a vector object"msgstr "非向量目的物件"#: src/main/eval.c:2938 src/main/eval.c:2960 src/main/eval.c:2984#: src/main/eval.c:3008msgid "can only handle simple real vectors"msgstr "只能處理簡單的實數向量"#: src/main/eval.c:2947 src/main/eval.c:2994msgid "not a simple vector"msgstr "非簡單向量"#: src/main/eval.c:2964 src/main/eval.c:3012 src/main/subassign.c:982#: src/main/subset.c:815msgid "incorrect number of subscripts"msgstr "下標數目不正確"#: src/main/eval.c:2975 src/main/eval.c:3026msgid "not a simple matrix"msgstr "非簡單矩陣"#: src/main/eval.c:3063msgid "bytecode version mismatch; using eval"msgstr "位元組碼版本不符；使用 eval"#: src/main/eval.c:3068msgid "bytecode version is too old"msgstr "位元組碼版本太舊"#: src/main/eval.c:3069msgid "bytecode version is too new"msgstr "位元組碼版本太新"#: src/main/eval.c:3074msgid "byte code version mismatch"msgstr "位元組碼版本不符"#: src/main/eval.c:3090msgid "missing value where logical needed"msgstr "需要邏輯值的地方有缺值"#: src/main/eval.c:3091msgid "argument of if(*) is not interpretable as logical"msgstr "if(*) 的引數不能做為邏輯值解譯"#: src/main/eval.c:3125msgid "invalid sequence argument in for loop"msgstr "迴圈中的序列引數不正確"#: src/main/eval.c:3278 src/main/eval.c:3299 src/main/eval.c:3413msgid "not a BUILTIN function"msgstr "非 BUILTIN 函數"#: src/main/eval.c:3399msgid "bad function"msgstr "不當的函數"#: src/main/eval.c:3439msgid "not a SPECIAL function"msgstr "非 SPECIAL 函數"#: src/main/eval.c:3673msgid "cannot find index for threaded code address"msgstr "找不到執行緒程式碼位址的索引"#: src/main/eval.c:3753msgid "invalid symbol"msgstr "符號不正確"#: src/main/eval.c:3797msgid "argument is not a byte code object"msgstr "引數不是位元組碼目的物件"#: src/main/eval.c:3818msgid "bad file name"msgstr "不當的檔案名稱"#: src/main/eval.c:3822 src/main/eval.c:3843msgid "unable to open 'file'"msgstr "無法開啟 'file'"#: src/main/eval.c:3837 src/main/saveload.c:1929msgid "'file' must be non-empty string"msgstr "'file' 必須是非空字串"#: src/main/eval.c:3839 src/main/saveload.c:1931 src/main/saveload.c:2221#: src/main/serialize.c:1790msgid "'ascii' must be logical"msgstr "'ascii' 必須是邏輯值"#: src/main/eval.c:3868 src/main/eval.c:3875msgid "R_CompiledFileName: buffer too small"msgstr "R_CompiledFileName: 緩衝區太小"#: src/main/eval.c:3908msgid "code must be a generic vector"msgstr "程式碼必須是一般向量"#: src/main/eval.c:3947msgid "profile timer in use"msgstr "程式概要分析計時器在使用中"#: src/main/eval.c:3949msgid "already byte code profiling"msgstr "已經在進行位元組碼程式概要分析"#: src/main/eval.c:3967msgid "setting profile timer failed"msgstr "程式概要分析計時器設置失敗"#: src/main/eval.c:3984msgid "not byte code profiling"msgstr "非位元組碼程式概要分析"#: src/main/fourier.c:54 src/main/fourier.c:145 src/main/summary.c:754msgid "non-numeric argument"msgstr "非數值引數"#: src/main/fourier.c:72 src/main/fourier.c:87 src/main/fourier.c:159msgid "fft factorization error"msgstr "fft 因數分解錯誤"#: src/main/fourier.c:131msgid "vector-valued (multivariate) series required"msgstr "需要向量值序列 (多變數)"#: src/main/fourier.c:203msgid "no factors"msgstr "非因子"#: src/main/fourier.c:206msgid "invalid factors"msgstr "因子不正確"#: src/main/gevents.c:53#, fuzzymsgid "internal error"msgstr "內部錯誤 'do_sys'"#: src/main/gevents.c:88msgid "invalid prompt"msgstr "提示不正確"#: src/main/gevents.c:100#, fuzzymsgid "recursive use of getGraphicsEvent not supported"msgstr "call_R 不支援 '%s' 型式"#: src/main/gevents.c:110#, fuzzymsgid "no graphics event handlers set"msgstr "沒有活動中的繪圖裝置"#: src/main/gram.y:137 src/main/gram.y:152 src/main/gram.y:2007#: src/main/gram.y:2021#, fuzzy, c-formatmsgid "EOF whilst reading MBCS char at line %d"msgstr "讀取 MBCS 位元組時遇到 EOF"#: src/main/gram.y:141 src/main/gram.y:149 src/main/gram.y:2011#: src/main/gram.y:2018#, fuzzy, c-formatmsgid "invalid multibyte character in parser at line %d"msgstr "在 mbcs_get_next 中不能有多位元組字元"#: src/main/gram.y:427#, fuzzy, c-formatmsgid "function is too long to keep source (at line %d)"msgstr "函數太長，無法保留其程式碼"#: src/main/gram.y:990#, fuzzy, c-formatmsgid "incorrect tag type at line %d"msgstr "標記類型不正確"#: src/main/gram.y:1483#, fuzzymsgid "contextstack overflow"msgstr "節點堆疊向上溢位"#: src/main/gram.y:1719msgid "input"msgstr ""#: src/main/gram.y:1720msgid "end of input"msgstr ""#: src/main/gram.y:1721msgid "string constant"msgstr ""#: src/main/gram.y:1722#, fuzzymsgid "numeric constant"msgstr "非數值引數"#: src/main/gram.y:1723#, fuzzymsgid "symbol"msgstr "不是符號"#: src/main/gram.y:1724msgid "assignment"msgstr ""#: src/main/gram.y:1725msgid "end of line"msgstr ""#: src/main/gram.y:1739 src/main/gram.y:1745#, fuzzy, c-formatmsgid "unexpected %s"msgstr "需要公式"#: src/main/gram.y:1755#, fuzzy, c-formatmsgid "Repeated formal argument '%s' on line %d"msgstr "重複的正式引數"#: src/main/gram.y:1773#, fuzzy, c-formatmsgid "input buffer overflow at line %d"msgstr "輸入緩衝區向上溢位"#: src/main/gram.y:1922#, c-formatmsgid "integer literal %sL contains decimal; using numeric value"msgstr ""#: src/main/gram.y:1924#, c-formatmsgid "non-integer value %s qualified with L; using numeric value"msgstr ""#: src/main/gram.y:1935#, c-formatmsgid "integer literal %sL contains unnecessary decimal point"msgstr ""#: src/main/gram.y:1967#, fuzzy, c-formatmsgid "unable to allocate buffer for long string at line %d"msgstr "無法指派記憶體 (於 GEregister)"#: src/main/gram.y:2122#, c-formatmsgid "'\\x' used without hex digits in character string starting \"%s\""msgstr ""#: src/main/gram.y:2136#, fuzzy, c-formatmsgid "\\uxxxx sequences not supported inside backticks (line %d)"msgstr "\\Uxxxxxxxx 序列於 Windows 上並不支援"#: src/main/gram.y:2151#, c-formatmsgid "'\\u' used without hex digits in character string starting \"%s\""msgstr ""#: src/main/gram.y:2159#, fuzzy, c-formatmsgid "invalid \\u{xxxx} sequence (line %d)"msgstr "\\u{xxxx} 序列不正確"#: src/main/gram.y:2171#, fuzzy, c-formatmsgid "\\Uxxxxxxxx sequences not supported inside backticks (line %d)"msgstr "\\Uxxxxxxxx 序列於 Windows 上並不支援"#: src/main/gram.y:2186#, c-formatmsgid "'\\U' used without hex digits in character string starting \"%s\""msgstr ""#: src/main/gram.y:2194#, fuzzy, c-formatmsgid "invalid \\U{xxxxxxxx} sequence (line %d)"msgstr "\\U{xxxxxxxx} 序列不正確"#: src/main/gram.y:2234#, fuzzy, c-formatmsgid "'\\%c' is an unrecognized escape in character string starting \"%s\""msgstr "第一個引數必須是字串"#: src/main/gram.y:2282msgid "mixing Unicode and octal/hex escapes in a string is not allowed"msgstr ""#: src/main/gram.y:2286#, c-formatmsgid """string at line %d containing Unicode escapes not in this locale\n""is too long (max 10000 chars)"msgstr ""#: src/main/gram.y:2385#, fuzzy, c-formatmsgid "functions nested too deeply in source code at line %d"msgstr "程式碼來源中的函數功能巢狀太深"#: src/main/gram.y:2813 src/main/gram.y:2820 src/main/gram.y:2826#: src/main/gram.y:2833#, fuzzy, c-formatmsgid "contextstack overflow at line %d"msgstr "整數堆疊向上溢位"#: src/main/graphics.c:287#, fuzzy, c-formatmsgid "bad units specified in '%s'"msgstr "%s 中的單位設定不正確，請回報!"#: src/main/graphics.c:1778 src/main/graphics.c:1800msgid "attempt to plot on null device"msgstr "試圖於 null 裝置上繪圖"#: src/main/graphics.c:1830msgid "outer margins too large (fig.region too small)"msgstr "外側版邊太大 (fig.region 太小)"#: src/main/graphics.c:1832msgid "figure region too large"msgstr "圖區太大"#: src/main/graphics.c:1834msgid "figure margins too large"msgstr "圖版邊太大"#: src/main/graphics.c:1836msgid "plot region too large"msgstr "繪圖區太大"#: src/main/graphics.c:1885#, c-formatmsgid "nonfinite axis limits [GScale(%g,%g,%d, .); log=%d]"msgstr "座標範圍不能無限大 [GScale(%g,%g,%d, .); log=%d]"#: src/main/graphics.c:1915#, c-formatmsgid "axis style \"%c\" unimplemented"msgstr "座標形式 \"%c\" 尚未實作"#: src/main/graphics.c:1981#, c-formatmsgid "relative range of values =%4.0f * EPS, is small (axis %d)"msgstr "相對範圍值 =%4.0f * EPS太小 (座標 %d)"#: src/main/graphics.c:2198 src/main/graphics.c:2561msgid "No graphics device is active"msgstr "沒有活動中的繪圖裝置"#: src/main/graphics.c:2393msgid "plot.new has not been called yet"msgstr "plot.new 還沒有被呼叫"#: src/main/graphics.c:2528msgid "no locator capability in device driver"msgstr "裝置驅動程式沒有定位器功能"#: src/main/graphics.c:2800 src/main/graphics.c:2836msgid "unable to allocate memory (in GPolygon)"msgstr "無法指派記憶體 (GPolygon)"#: src/main/graphics.c:3022msgid "zero-length arrow is of indeterminate angle and so skipped"msgstr "零長度箭頭的角度不定，因此忽略不用"#: src/main/graphics.c:3103#, c-formatmsgid "invalid par(\"bty\") = '%c'; no box() drawn"msgstr "par(\"bty\")='%c' 不正確; 取消繪製 box()"#: src/main/graphics.c:3120msgid "invalid argument to GBox"msgstr "GBox 引數不正確"#: src/main/graphics.c:3358#, fuzzymsgid "Metric information not available for this device"msgstr "此連結不能被截短"#: src/main/grep.c:83 src/main/grep.c:807 src/main/grep.c:1162#: src/main/grep.c:1828#, c-formatmsgid "invalid regular expression '%s'"msgstr "正規表示式「%s」不正確"#: src/main/grep.c:140 src/main/grep.c:728 src/main/grep.c:730#: src/main/grep.c:1078 src/main/grep.c:1080 src/main/grep.c:1761#: src/main/grep.c:1763#, fuzzy, c-formatmsgid "argument '%s' will be ignored"msgstr "非正數的 'fill' 引數將會被忽略"#: src/main/grep.c:191 src/main/grep.c:278 src/main/grep.c:386#: src/main/grep.c:836 src/main/grep.c:1862#, fuzzy, c-formatmsgid "input string %d is invalid UTF-8"msgstr "輸入的字串 %d 不適用於此語言環境"#: src/main/grep.c:256 src/main/grep.c:353#, fuzzy, c-formatmsgid "'split' string %d is invalid UTF-8"msgstr "輸入的字串 %d 不適用於此語言環境"#: src/main/grep.c:260 src/main/grep.c:357 src/main/grep.c:530#, fuzzy, c-formatmsgid "'split' string %d is invalid in this locale"msgstr "輸入的字串 %d 不適用於此語言環境"#: src/main/grep.c:365 src/main/grep.c:805 src/main/grep.c:1160#: src/main/grep.c:1826#, c-formatmsgid """PCRE pattern compilation error\n""\t'%s'\n""\tat '%s'\n"msgstr ""#: src/main/grep.c:367#, c-formatmsgid "invalid split pattern '%s'"msgstr "split 的式樣 '%s' 不正確"#: src/main/grep.c:371 src/main/grep.c:811 src/main/grep.c:1167#: src/main/grep.c:1833#, c-formatmsgid """PCRE pattern study error\n""\t'%s'\n"msgstr ""#: src/main/grep.c:788 src/main/grep.c:1809#, fuzzymsgid "regular expression is invalid UTF-8"msgstr "正規表示式不適用於此語言環境"#: src/main/grep.c:1135#, fuzzymsgid "'pattern' is invalid UTF-8"msgstr "'pattern' 的值在本語言環境下不正確"#: src/main/grep.c:1137#, fuzzymsgid "'replacement' is invalid UTF-8"msgstr "'replacement' 的值在本語言環境下不正確"#: src/main/grep.c:1141msgid "'pattern' is invalid in this locale"msgstr "'pattern' 的值在本語言環境下不正確"#: src/main/grep.c:1144msgid "'replacement' is invalid in this locale"msgstr "'replacement' 的值在本語言環境下不正確"#: src/main/grep.c:1149msgid "zero-length pattern"msgstr "式樣長度為零"#: src/main/grep.c:1289 src/main/grep.c:1305 src/main/grep.c:1353#: src/main/grep.c:1369 src/main/grep.c:1416 src/main/grep.c:1432#, fuzzymsgid "result string is too long"msgstr "輸入字串太長"#: src/main/internet.c:90msgid "internet routines cannot be accessed in module"msgstr "無法讀寫模組中的網際網路例行程式"#: src/main/internet.c:102 src/main/internet.c:140 src/main/internet.c:152#: src/main/internet.c:163 src/main/internet.c:174 src/main/internet.c:185#: src/main/internet.c:194 src/main/internet.c:205 src/main/internet.c:216#: src/main/internet.c:226 src/main/internet.c:237msgid "internet routines cannot be loaded"msgstr "無法載入網際網路例行程式"#: src/main/internet.c:117 src/main/memory.c:2715 src/main/memory.c:2724#: src/main/memory.c:2735 src/main/memory.c:2748 src/main/memory.c:2764#: src/main/memory.c:2781msgid "bad value"msgstr "不當的值"#: src/main/internet.c:123#, fuzzymsgid "internet routines were already initialized"msgstr "無法載入網際網路例行程式"#: src/main/internet.c:248#, fuzzymsgid "invalid bind address specification"msgstr "檔案名稱設定不正確"#: src/main/internet.c:268 src/main/internet.c:278 src/main/internet.c:288#: src/main/internet.c:298 src/main/internet.c:308 src/main/internet.c:318#: src/main/internet.c:329msgid "socket routines cannot be loaded"msgstr "無法載入插槽例行程式"#: src/main/lapack.c:62msgid "lapack routines cannot be accessed in module"msgstr "無法讀寫模組中的 lapack 例行程式"#: src/main/lapack.c:79 src/main/lapack.c:91 src/main/lapack.c:103#: src/main/lapack.c:115 src/main/lapack.c:127 src/main/lapack.c:139#: src/main/lapack.c:151 src/main/lapack.c:163 src/main/lapack.c:175#: src/main/lapack.c:186 src/main/lapack.c:197 src/main/lapack.c:208#: src/main/lapack.c:220 src/main/lapack.c:232 src/main/lapack.c:244#: src/main/lapack.c:256 src/main/lapack.c:268 src/main/lapack.c:280#: src/main/lapack.c:292 src/main/lapack.c:304 src/main/lapack.c:316#: src/main/lapack.c:328msgid "lapack routines cannot be loaded"msgstr "無法載入 lapack 例行程式"#: src/main/logic.c:47msgid "binary operations require two arguments"msgstr "二元運算需要兩個引數"#: src/main/logic.c:65 src/main/logic.c:127#, fuzzymsgid "operations are possible only for numeric, logical or complex types"msgstr "此運算只適用於數值或邏輯類型"#: src/main/logic.c:75msgid "binary operation on non-conformable arrays"msgstr "二元運算不能在非調和陣列上進行"#: src/main/logic.c:101 src/main/relop.c:143msgid "non-conformable time series"msgstr "非調和時間序列"#: src/main/logic.c:214#, c-formatmsgid "'%s' operator requires 2 arguments"msgstr "'%s' 運算子需要兩個引數"#: src/main/logic.c:222#, c-formatmsgid "invalid 'x' type in 'x %s y'"msgstr "'x %s y' 中的 'x' 類型不正確"#: src/main/logic.c:229#, c-formatmsgid "invalid 'y' type in 'x %s y'"msgstr "'x %s y' 中的 'y' 類型不正確"#: src/main/logic.c:301msgid "Unary operator `!' called with two arguments"msgstr "呼叫一元運算「!」時用了兩個引數"#: src/main/logic.c:405#, c-formatmsgid "coercing argument of type '%s' to logical"msgstr ""#: src/main/main.c:48msgid "dummy - do not translate"msgstr "dummy - do not translate"#: src/main/main.c:220msgid "error: system commands are not supported in this version of R.\n"msgstr "錯誤: 此 R 版本不支援系統命令。\n"#: src/main/main.c:477msgid "Error: segfault from C stack overflow\n"msgstr "錯誤: C 堆疊向上溢位的區段錯誤\n"#: src/main/main.c:826msgid "unable to open the base package\n"msgstr "無法開啟基本套件\n"#: src/main/main.c:902msgid "unable to restore saved data in .RData\n"msgstr "不可使用 .Rdata 來復原儲存資料\n"#: src/main/main.c:948msgid "During startup - "msgstr "於啟動期間 - "#: src/main/main.c:1174msgid "cannot quit from browser"msgstr "無法離開瀏覽器"#: src/main/main.c:1178msgid "one of \"yes\", \"no\", \"ask\" or \"default\" expected."msgstr "只能用 \"yes\"、\"no\"、\"ask\" 或 \"default\" 中的一個。"#: src/main/main.c:1183msgid "save=\"ask\" in non-interactive use: command-line default will be used"msgstr "save=\"ask\" 不能在非交互狀態時使用：改用命令列預設值"#: src/main/main.c:1191msgid "unrecognized value of 'save'"msgstr "沒有這種 'save' 值"#: src/main/main.c:1194msgid "invalid 'status', 0 assumed"msgstr "'status' 不正確, 假定為 0"#: src/main/main.c:1199msgid "invalid 'runLast', FALSE assumed"msgstr "'runLast' 不正確, 假定為 FALSE"#: src/main/main.c:1230msgid "cannot allocate space for toplevel callback element"msgstr "無法為最高層回呼元素指派空間"#: src/main/main.c:1308msgid "negative index passed to R_removeTaskCallbackByIndex"msgstr "負的索引值被傳遞給 R_removeTaskCallbackByIndex"#: src/main/main.c:1416#, c-formatmsgid "warning messages from top-level task callback '%s'\n"msgstr "最高層任務回呼 '%s' 產生了警告訊息\n"#: src/main/main.c:1472msgid "top-level task callback did not return a logical value"msgstr "最高層任務回呼沒回傳邏輯值"#: src/main/mapply.c:62msgid "argument 'MoreArgs' of 'mapply' is not a list"msgstr "'mapply' 的引數 'MoreArgs' 不是一個串列"#: src/main/mapply.c:99msgid "longer argument not a multiple of length of shorter"msgstr "長引數長度不是短引數長度的整數倍"#: src/main/match.c:108msgid "invalid partial string match"msgstr "部分字串比對不正確"#: src/main/match.c:222 src/main/match.c:262 src/main/objects.c:54#: src/main/objects.c:64#, c-formatmsgid "formal argument \"%s\" matched by multiple actual arguments"msgstr "正式引數 \"%s\" 有多個與之相對應的實際引數"#: src/main/match.c:225 src/main/match.c:260#, c-formatmsgid "argument %d matches multiple formal arguments"msgstr "引數 %d 有多個與之相對應的正式引數"#: src/main/match.c:266#, c-formatmsgid "partial argument match of '%s' to '%s'"msgstr ""#: src/main/match.c:377#, fuzzy, c-formatmsgid "unused argument(s) %s"msgstr "未使用的引數 (%s ...)"#: src/main/memory.c:961msgid "can only weakly reference/finalize reference objects"msgstr "參考物件只能被弱型參考或被終了"#: src/main/memory.c:995msgid "finalizer must be a function or NULL"msgstr "終了程式必須是函數或 NULL"#: src/main/memory.c:1046 src/main/memory.c:1054 src/main/memory.c:1065msgid "not a weak reference"msgstr "非弱型參考"#: src/main/memory.c:1181msgid "first argument must be environment or external pointer"msgstr "第一引數必須是環境或外部指標"#: src/main/memory.c:1183msgid "second argument must be a function"msgstr "第二引數必須是函數"#: src/main/memory.c:1187msgid "third argument must be 'TRUE' or 'FALSE'"msgstr "第三引數的值必須是 'TRUE' 或 'FALSE'"#: src/main/memory.c:1561msgid "vector memory exhausted (limit reached?)"msgstr "向量記憶體已用完 (達到了極值?)"#: src/main/memory.c:1567msgid "cons memory exhausted (limit reached?)"msgstr "cons 記憶體已用完 (達到了極值?)"#: src/main/memory.c:1572#, fuzzymsgid "memory exhausted (limit reached?)"msgstr "cons 記憶體已用完 (達到了極值?)"#: src/main/memory.c:1696 src/main/memory.c:1702#, fuzzy, c-formatmsgid "cannot allocate memory block of size %0.1f Gb"msgstr "無法分派大小為 %.0f 的記憶體區塊"#: src/main/memory.c:1928msgid "negative length vectors are not allowed"msgstr "不允許負長度的向量"#: src/main/memory.c:1950 src/main/memory.c:1961 src/main/memory.c:1972#: src/main/memory.c:1985#, c-formatmsgid "cannot allocate vector of length %d"msgstr "無法分派長度為 %d 的向量"#: src/main/memory.c:1998#, fuzzy, c-formatmsgid "invalid type/length (%s/%d) in vector allocation"msgstr "向量指派的類型/長度 (%d/%d) 不正確"#: src/main/memory.c:2067#, fuzzy, c-formatmsgid "cannot allocate vector of size %0.1f Gb"msgstr "無法指派大小為 %lu Kb 的向量"#: src/main/memory.c:2071#, fuzzy, c-formatmsgid "cannot allocate vector of size %0.1f Mb"msgstr "無法指派大小為 %lu Kb 的向量"#: src/main/memory.c:2075#, fuzzy, c-formatmsgid "cannot allocate vector of size %0.f Kb"msgstr "無法指派大小為 %lu Kb 的向量"#: src/main/memory.c:2202msgid "gc.time() is not implemented on this system"msgstr "本系統沒有實作 gc.time()"#: src/main/memory.c:2370msgid "protect(): protection stack overflow"msgstr "protect()：防護堆疊向上溢位"#: src/main/memory.c:2386#, c-formatmsgid "unprotect(): only %d protected items"msgstr ""#: src/main/memory.c:2400msgid "unprotect_ptr: pointer not found"msgstr "unprotect_ptr: 找不到這個指標"#: src/main/memory.c:2441#, c-formatmsgid "Calloc could not allocate (%d of %d) memory"msgstr "Calloc 無法分派 (%d / %d) 記憶體"#: src/main/memory.c:2451#, c-formatmsgid "Realloc could not re-allocate (size %d) memory"msgstr "Realloc 無法重新分派 (大小為 %d) 的記憶體"#: src/main/memory.c:2669msgid "not safe to return vector pointer"msgstr "回傳向量指標不是安全的做法"#: src/main/memory.c:2905#, fuzzymsgid "memory profiling is not available on this system"msgstr "本系統沒有 R 程式概要分析這個功能"#: src/main/memory.c:2970#, fuzzy, c-formatmsgid "Rprofmem: cannot open output file '%s'"msgstr "Rprof: 打不開程式概要分析檔案 '%s'"#: src/main/model.c:140msgid "invalid term in model formula"msgstr "模型公式項目不正確"#: src/main/model.c:215msgid "invalid model formula"msgstr "模型公式不正確"#: src/main/model.c:241 src/main/model.c:485msgid "invalid power in formula"msgstr "公式中的冪不正確"#: src/main/model.c:277msgid "invalid model formula in ExtractVars"msgstr "ExtractVars 中的模型公式不正確"#: src/main/model.c:607#, c-formatmsgid "duplicated name '%s' in data frame using '.'"msgstr "在資料框中用 '.' 時不能有重複的名稱 '%s'"#: src/main/model.c:664msgid "invalid model formula in EncodeVars"msgstr "EncodeVars 中的模型公式不正確"#: src/main/model.c:754msgid "argument is not a valid model"msgstr "引數不是正確的模型"#: src/main/model.c:775msgid "'data' argument is of the wrong type"msgstr "'data' 引數類型不正確"#: src/main/model.c:1040msgid "'.' in formula and no 'data' argument"msgstr "'.' 存在於公式中且缺少 'data' 引數"#: src/main/model.c:1188msgid "invalid formula in 'update'"msgstr "'update' 中的公式不正確"#: src/main/model.c:1226msgid "formula expected"msgstr "需要公式"#: src/main/model.c:1317msgid "invalid variables"msgstr "變數不正確"#: src/main/model.c:1321 src/main/model.c:1326msgid "number of variables != number of variable names"msgstr "變數數目 != 變數名稱數目"#: src/main/model.c:1324msgid "invalid extra variables"msgstr "額外變數不正確"#: src/main/model.c:1328msgid "invalid extra variable names"msgstr "額外變數名稱不正確"#: src/main/model.c:1349#, c-formatmsgid "overlong names in '%s'"msgstr "'%s' 中的名稱太長"#: src/main/model.c:1376#, fuzzy, c-formatmsgid "invalid type (%s) for variable '%s'"msgstr "座標標記類型不正確"#: src/main/model.c:1381#, c-formatmsgid "variable lengths differ (found for '%s')"msgstr "變數長度不一樣 (發現於 '%s')"#: src/main/model.c:1435msgid "invalid result from na.action"msgstr "na.action 的結果不正確"#: src/main/model.c:1629msgid "invalid model frame"msgstr "模型框格不正確"#: src/main/model.c:1631msgid "do not know how many cases"msgstr "案例數目不清"#: src/main/model.c:1654#, c-formatmsgid "variable lengths differ (found for variable %d)"msgstr "變數長度不一樣 (發現於變數 %d)"#: src/main/model.c:1658 src/main/model.c:1665#, c-formatmsgid "variable %d has no levels"msgstr "變數 %d 沒有因子層"#: src/main/model.c:1777msgid "the response appeared on the right-hand side and was dropped"msgstr "公式右側有反應出現，忽略不用"#: src/main/model.c:1797#, c-formatmsgid "term %d would require %.0g columns"msgstr ""#: src/main/model.c:1801#, c-formatmsgid "matrix would require %.0g columns"msgstr ""#: src/main/model.c:1812#, c-formatmsgid "problem with term %d in model.matrix: no columns are assigned"msgstr "模型矩陣的 %d 項有問題: 沒有指定的行"#: src/main/model.c:1861 src/main/model.c:1866 src/main/model.c:1872#: src/main/model.c:1883 src/main/model.c:1889 src/main/model.c:1895msgid "term names will be truncated"msgstr "項目名稱太長，已被截短"#: src/main/model.c:1875msgid "complex variables are not currently allowed in model matrices"msgstr ""#: src/main/model.c:1899#, fuzzy, c-formatmsgid "variables of type '%s' are not allowed in model matrices"msgstr "矩陣下標中不允許負值"#: src/main/names.c:1024msgid "string argument required"msgstr "需要字串引數"#: src/main/names.c:1032msgid "no such primitive function"msgstr "沒有此一原始函數"#: src/main/names.c:1150msgid "attempt to use zero-length variable name"msgstr "不能用零長度的變數名"#: src/main/names.c:1152#, c-formatmsgid "variable names are limited to %d bytes"msgstr ""#: src/main/names.c:1181msgid "invalid .Internal() argument"msgstr ".Internal() 引數不正確"#: src/main/names.c:1184msgid "invalid internal function"msgstr "內部函數不正確"#: src/main/names.c:1186#, c-formatmsgid "no internal function \"%s\""msgstr "沒有 \"%s\" 這個內部函數"#: src/main/objects.c:44msgid "generic 'function' is not a function"msgstr "一般 'function' 不是函數"#: src/main/objects.c:194msgid "bad generic call environment"msgstr "一般呼叫環境不正確"#: src/main/objects.c:200msgid "bad generic definition environment"msgstr "一般定義環境不正確"#: src/main/objects.c:239msgid """No .S3MethodsClass table, can't use S4 objects with S3 methods (methods ""package not attached?)"msgstr ""#: src/main/objects.c:263 src/main/objects.c:403msgid "'UseMethod' used in an inappropriate fashion"msgstr "'UseMethod' 不能這樣使用"#: src/main/objects.c:283msgid "Invalid generic function in 'usemethod'"msgstr "'usemethod' 中不能用一般功能"#: src/main/objects.c:391#, fuzzymsgid "there must be a 'generic' argument"msgstr "必須有第一引數"#: src/main/objects.c:395#, fuzzymsgid "'generic' argument must be a character string"msgstr "第二個引數必須是字串"#: src/main/objects.c:432msgid "'UseMethod' called from outside a closure"msgstr "'UseMethod' 從閉包外部被呼叫"#: src/main/objects.c:439msgid "first argument must be a generic name"msgstr "第一引數必須是一般名稱"#: src/main/objects.c:464#, fuzzy, c-formatmsgid "no applicable method for '%s' applied to an object of class \"%s\""msgstr "\"%s\" 沒有適用的方法"#: src/main/objects.c:526msgid "'NextMethod' called from outside a function"msgstr "'NextMethod' 不能在函數外呼叫"#: src/main/objects.c:532msgid "'NextMethod' called from an anonymous function"msgstr "'NextMethod' 不能在匿名函數內呼叫"#: src/main/objects.c:552msgid "no calling generic was found: was a method called directly?"msgstr "找不到呼叫此方法的一般函數: 是不是已經直接呼叫這個方法?"#: src/main/objects.c:555#, c-formatmsgid "'function' is not a function, but of type %d"msgstr "'function' 不是函數, 而是類型 %d"#: src/main/objects.c:629msgid "wrong argument ..."msgstr "引數不正確 ..."#: src/main/objects.c:642msgid "object not specified"msgstr "目的物件沒有指定"#: src/main/objects.c:652 src/main/objects.c:659msgid "generic function not specified"msgstr "一般功能沒有指定"#: src/main/objects.c:656msgid "invalid generic argument to NextMethod"msgstr "NextMethod 不能用一般引數"#: src/main/objects.c:669msgid "invalid 'group' argument found in NextMethod"msgstr "NextMethod 不能用 'group' 引數"#: src/main/objects.c:688msgid "wrong value for .Method"msgstr ".Method 的值不正確"#: src/main/objects.c:692 src/main/objects.c:701#, c-formatmsgid "method name too long in '%s'"msgstr "'%s' 中的方法名稱太長"#: src/main/objects.c:704msgid "Incompatible methods ignored"msgstr "不相容方法，忽略不用"#: src/main/objects.c:764 src/main/objects.c:769msgid "no method to invoke"msgstr "沒有可以呼叫的方法"#: src/main/objects.c:815msgid "cannot unclass an environment"msgstr "無法取消環境的類別"#: src/main/objects.c:818msgid "cannot unclass an external pointer"msgstr "無法取消外部指標的類別"#: src/main/objects.c:853msgid "'what' must be a character vector"msgstr "'what' 必須是字元向量"#: src/main/objects.c:857msgid "'which' must be a length 1 logical vector"msgstr "'which' 必須是長度為 1 的邏輯向量"#: src/main/objects.c:863msgid "use 'is()' instead of 'inherits()' on S4 objects"msgstr ""#: src/main/objects.c:994#, c-formatmsgid "unable to find a non-generic version of function \"%s\""msgstr "無法找到函數 \"%s\" 非一般的版本"#: src/main/objects.c:1026msgid """standardGeneric called without methods dispatch enabled (will be ignored)"msgstr "standardGeneric 被呼叫，但方法分派沒有啟用 (忽略不用)"#: src/main/objects.c:1035msgid "argument to standardGeneric must be a non-empty character string"msgstr "standardGeneric 的引數必須是非空字串"#: src/main/objects.c:1040#, c-formatmsgid """call to standardGeneric(\"%s\") apparently not from the body of that generic ""function"msgstr "不能從非同屬函數中呼叫 standardGeneric(\"%s\") "#: src/main/objects.c:1063msgid "argument 'code' must be a character string"msgstr "引數 'code' 必須是字串"#: src/main/objects.c:1130#, c-formatmsgid """invalid primitive methods code (\"%s\"): should be \"clear\", \"reset\", ""\"set\", or \"suppress\""msgstr """原始方法程式碼 (\"%s\") 不正確：應該是 \"clear\"、\"reset\"、\"set\" 或 ""\"suppress\""#: src/main/objects.c:1138msgid "invalid object: must be a primitive function"msgstr "目的物件不正確: 必須是原始函數"#: src/main/objects.c:1185#, c-formatmsgid """the formal definition of a primitive generic must be a function object (got ""type '%s')"msgstr "原始一般函數的正式定義必須是函數目的物件 (不能是 '%s' 類別)"#: src/main/objects.c:1215#, c-formatmsgid "object returned as generic function \"%s\" doesn't appear to be one"msgstr ""#: src/main/objects.c:1313msgid "invalid primitive operation given for dispatch"msgstr "不能分派原始運算"#: src/main/objects.c:1339 src/main/objects.c:1358msgid "dispatch error"msgstr "分派錯誤"#: src/main/objects.c:1352#, c-formatmsgid """primitive function \"%s\" has been set for methods but no generic function ""supplied"msgstr "原始函數 \"%s\" 設定了方法，但沒有一般函數 "#: src/main/objects.c:1377msgid "C level MAKE_CLASS macro called with NULL string pointer"msgstr "C 級的 MAKE_TYPE 巨集不能用 NULL 字串指標來呼叫"#: src/main/objects.c:1393#, fuzzymsgid "R_getClassDef(.) called with NULL string pointer"msgstr "C 級的 MAKE_TYPE 巨集不能用 NULL 字串指標來呼叫"#: src/main/objects.c:1413msgid "C level NEW macro called with null class definition pointer"msgstr "C 級的 NEW 巨集不能用 null 類別定義指標來呼叫"#: src/main/objects.c:1417#, fuzzy, c-formatmsgid "trying to generate an object from a virtual class (\"%s\")"msgstr "無法從虛擬類別 (\"%s\") 產生 C 目的物件"#: src/main/objects.c:1462msgid "'R_get_primname' called on a non-primitive"msgstr ""#: src/main/objects.c:1492#, c-formatmsgid "Object of class \"%s\" does not correspond to a valid S3 object"msgstr ""#: src/main/optim.c:73 src/main/optim.c:100 src/main/optim.c:184msgid "non-finite value supplied by optim"msgstr "optim 回傳了無限值"#: src/main/optim.c:80#, c-formatmsgid "objective function in optim evaluates to length %d not 1"msgstr "optim 內的目的函數長度被評估為 %d，而不是 1"#: src/main/optim.c:107#, c-formatmsgid "gradient in optim evaluated to length %d not %d"msgstr "optim 內的梯度長度被評估為 %d，而不是 %d"#: src/main/optim.c:191#, c-formatmsgid "candidate point in optim evaluated to length %d not %d"msgstr "optim 內的候選點長度被評估為 %d，而不是 %d"#: src/main/optim.c:221 src/main/optim.c:409msgid "'fn' is not a function"msgstr "'fn' 不是函數"#: src/main/optim.c:238 src/main/optim.c:415msgid "'parscale' is of the wrong length"msgstr "'parscale' 的長度不正確"#: src/main/optim.c:252msgid "'maxit' is not an integer"msgstr "'maxit' 不是整數"#: src/main/optim.c:271msgid "'tmax' is not an integer"msgstr "'tmax' 不是整數"#: src/main/optim.c:273 src/main/optim.c:290 src/main/optim.c:315#: src/main/optim.c:345 src/main/optim.c:423msgid "'gr' is not a function"msgstr "'gr' 不是函數"#: src/main/optim.c:296 src/main/optim.c:321 src/main/optim.c:351#: src/main/optim.c:429msgid "'ndeps' is of the wrong length"msgstr "'ndeps' 長度不正確"#: src/main/optim.c:381msgid "unknown 'method'"msgstr "不明的 'method'"#: src/main/optim.c:512msgid "REPORT must be > 0 (method = \"BFGS\")"msgstr "REPORT 必須 > 0 (method = \"BFGS\")"#: src/main/optim.c:523msgid "initial value in 'vmmin' is not finite"msgstr "'vmmin' 的初始值不能為無限大"#: src/main/optim.c:671msgid "function cannot be evaluated at initial parameters"msgstr "不可使用初始參數來評估函數"#: src/main/optim.c:865msgid "unknown 'type' in CG method of optim"msgstr "optim 的 CG 方法中沒有這種 'type'"#: src/main/optim.c:878msgid "Function cannot be evaluated at initial parameters"msgstr "不可使用初始參數來評估函數"#: src/main/optim.c:933msgid "unknown type in CG method of optim"msgstr "optim 的 CG 方法中沒有此一類型"#: src/main/optim.c:1026msgid "REPORT must be > 0 (method = \"L-BFGS-B\")"msgstr "REPORT必須 > 0 (method = \"L-BFGS-B\")"#: src/main/optim.c:1050msgid "L-BFGS-B needs finite values of 'fn'"msgstr "L-BFGS-B 不能有 'fn' 的無限值"#: src/main/optim.c:1105#, fuzzymsgid "trace, REPORT must be >= 0 (method = \"SANN\")"msgstr "REPORT 必須 > 0 (method = \"BFGS\")"#: src/main/optimize.c:53 src/main/optimize.c:137 src/main/optimize.c:386msgid "NA replaced by maximum positive value"msgstr "NA 被換成最大的正值"#: src/main/optimize.c:61 src/main/optimize.c:145 src/main/optimize.c:394msgid "NA/Inf replaced by maximum positive value"msgstr "NA/Inf 被換成最大的正值"#: src/main/optimize.c:70msgid "invalid function value in 'optimize'"msgstr "'optimize' 中的函數值不正確"#: src/main/optimize.c:88 src/main/optimize.c:174 src/main/optimize.c:587msgid "attempt to minimize non-function"msgstr "不能將非函數最小化"#: src/main/optimize.c:104 src/main/optimize.c:188msgid "'xmin' not less than 'xmax'"msgstr "'xmin' 不能小於 xmax"#: src/main/optimize.c:154msgid "invalid function value in 'zeroin'"msgstr "'zeroin' 函數值不正確"#: src/main/optimize.c:201msgid "'maxiter' must be positive"msgstr "'maxiter' 必須是正數"#: src/main/optimize.c:229 src/main/optimize.c:235#, fuzzy, c-formatmsgid "NA value for '%s' is not allowed"msgstr "'...' 中的值不是一個約定"#: src/main/optimize.c:378msgid "non-finite value supplied by 'nlm'"msgstr "'nlm' 回傳了無限值"#: src/main/optimize.c:413msgid "invalid function value in 'nlm' optimizer"msgstr "'nlm' 最佳化器中的函數值不正確"#: src/main/optimize.c:424 src/main/optimize.c:439msgid "function value caching for optimization is seriously confused"msgstr "最佳化時快取的函數值有嚴重混淆"#: src/main/optimize.c:454msgid "numeric parameter expected"msgstr "需要數值參數"#: src/main/optimize.c:458msgid "conflicting parameter lengths"msgstr "參數的長度自相矛盾"#: src/main/optimize.c:462msgid "invalid parameter length"msgstr "參數長度不正確"#: src/main/optimize.c:472 src/main/optimize.c:479msgid "missing value in parameter"msgstr "參數中不能有缺值"#: src/main/optimize.c:484msgid "invalid parameter type"msgstr "參數類型不正確"#: src/main/optimize.c:492msgid "invalid NA value in parameter"msgstr "參數中的 NA 值不正確"#: src/main/optimize.c:502msgid "non-positive number of parameters in nlm"msgstr "nlm 參數不能是負的"#: src/main/optimize.c:504msgid "nlm is inefficient for 1-d problems"msgstr "用 nlm 來解決一維問題效率不高"#: src/main/optimize.c:506msgid "invalid gradient tolerance in nlm"msgstr "nlm 中的梯度容錯不正確"#: src/main/optimize.c:508msgid "invalid iteration limit in nlm"msgstr "nlm 中的迭代極值不正確"#: src/main/optimize.c:510msgid "minimization function has no good digits in nlm"msgstr "nlm 中的最小化函數沒有可以用的適當的數字"#: src/main/optimize.c:512msgid "no analytic gradient to check in nlm!"msgstr "nlm 中沒有可以查的分析梯度!"#: src/main/optimize.c:514msgid "no analytic Hessian to check in nlm!"msgstr "nlm 中沒有可以查的分析用 Hessian!"#: src/main/optimize.c:516msgid "probable coding error in analytic gradient"msgstr "分析梯度的程式碼很有可能發生錯誤"#: src/main/optimize.c:518msgid "probable coding error in analytic Hessian"msgstr "分析 Hessian 的程式碼很有可能發生錯誤"#: src/main/optimize.c:520#, c-formatmsgid """*** unknown error message (msg = %d) in nlm()\n""*** should not happen!"msgstr "nlm() 產生了不明的錯誤訊息 (msg = %d)。這不應該發生!"#: src/main/optimize.c:531msgid "Relative gradient close to zero.\n"msgstr "相對梯度距離零太近。\n"#: src/main/optimize.c:532 src/main/optimize.c:536msgid "Current iterate is probably solution.\n"msgstr "目前的迭代值很可能就已經是答案了。\n"#: src/main/optimize.c:535msgid "Successive iterates within tolerance.\n"msgstr "在容錯範圍內連續迭代。\n"#: src/main/optimize.c:539msgid "Last global step failed to locate a point lower than x.\n"msgstr "最後一步的整體最佳化沒有能找到比 x 值要小的一個點。\n"#: src/main/optimize.c:540msgid """Either x is an approximate local minimum of the function,\n""the function is too non-linear for this algorithm,\n""or steptol is too large.\n"msgstr """要麼 x 已經是函數的本地最小值，要麼這個函數太非線性，要麼 steptol 太大。\n"#: src/main/optimize.c:545msgid "Iteration limit exceeded. Algorithm failed.\n"msgstr "超過了迭代極值。演算法失敗。\n"#: src/main/optimize.c:548msgid """Maximum step size exceeded 5 consecutive times.\n""Either the function is unbounded below,\n""becomes asymptotic to a finite value\n""from above in some direction,\n""or stepmx is too small.\n"msgstr """最大步驟超過了 5 次。\n""這個函數要麼沒有下邊界，\n""從上邊界達到了漸近有限值，\n""要麼是 stepmx 太小。\n"#: src/main/optimize.c:667msgid "hessian supplied is of the wrong length or mode, so ignored"msgstr "Hessian 的長度不正確或其狀態不正確，因此忽略不用"#: src/main/optimize.c:671msgid "gradient supplied is of the wrong length or mode, so ignored"msgstr "梯度的長度或其狀態不正確，因此忽略不用"#: src/main/options.c:109 src/main/options.c:157msgid "corrupted options list"msgstr ""#: src/main/options.c:119#, fuzzymsgid "invalid printing width, used 80"msgstr "部分字串比對不正確"#: src/main/options.c:130msgid "invalid printing digits, used 7"msgstr ""#: src/main/options.c:142msgid "invalid value for \"device.ask.default\", using FALSE"msgstr ""#: src/main/options.c:355#, fuzzymsgid "list argument has no valid names"msgstr "引數不是正確的模型"#: src/main/options.c:383#, fuzzy, c-formatmsgid "invalid 'width' parameter, allowed %d...%d"msgstr "'trans' 參數不正確"#: src/main/options.c:390#, fuzzy, c-formatmsgid "invalid 'digits' parameter, allowed %d...%d"msgstr "'trans' 參數不正確"#: src/main/options.c:397#, c-formatmsgid "'expressions' parameter invalid, allowed %d...%d"msgstr ""#: src/main/options.c:404 src/main/options.c:412 src/main/options.c:418#: src/main/options.c:426 src/main/options.c:433 src/main/options.c:438#: src/main/options.c:445 src/main/options.c:451 src/main/options.c:457#: src/main/options.c:464 src/main/options.c:470 src/main/options.c:476#: src/main/options.c:487 src/main/options.c:494 src/main/options.c:500#: src/main/options.c:508 src/main/options.c:515 src/main/options.c:522#: src/main/options.c:529 src/main/options.c:536 src/main/options.c:544#, fuzzy, c-formatmsgid "invalid value for '%s'"msgstr "'n' 的值不正確"#: src/main/options.c:549 src/main/options.c:562msgid "\"par.ask.default\" has been replaced by \"device.ask.default\""msgstr ""#: src/main/par.c:156#, c-formatmsgid "invalid value specified for graphical parameter \"%s\""msgstr "繪圖參數 \"%s\" 的值設得不正確"#: src/main/par.c:163#, c-formatmsgid "graphical parameter \"%s\" has the wrong length"msgstr "繪圖參數 \"%s\" 的長度不正確"#: src/main/par.c:257 src/main/par.c:687#, c-formatmsgid "graphical parameter \"%s\" cannot be set"msgstr "無法設定繪圖參數 \"%s\""#: src/main/par.c:325 src/main/par.c:715msgid "graphical parameter 'family' has a maximum length of 200 bytes"msgstr "繪圖參數 'family' 具有最大為 200 位元組的長度"#: src/main/par.c:454msgid "parameter \"mfg\" has the wrong length"msgstr "參數 \"mfg\" 的長度不正確"#: src/main/par.c:462msgid "parameter \"i\" in \"mfg\" is out of range"msgstr "\"mfg\" 中的參數 \"i\" 超出範圍"#: src/main/par.c:464msgid "parameter \"j\" in \"mfg\" is out of range"msgstr "\"mfg\" 中的參數 \"j\" 超出範圍"#: src/main/par.c:469msgid "value of nr in \"mfg\" is wrong and will be ignored"msgstr "\"mfg\" 中的 nr 值不正確，忽略不用"#: src/main/par.c:471msgid "value of nc in \"mfg\" is wrong and will be ignored"msgstr "\"mfg\" 中的 nc 值不正確，忽略不用"#: src/main/par.c:497#, fuzzymsgid "calling par(new=TRUE) with no plot"msgstr "不繪圖就不能呼叫 par(new=)"#: src/main/par.c:679 src/main/par.c:1092#, c-formatmsgid "graphical parameter \"%s\" is obsolete"msgstr "繪圖參數 \"%s\" 已過時"#: src/main/par.c:683 src/main/par.c:1096#, c-formatmsgid "\"%s\" is not a graphical parameter"msgstr "\"%s\" 不是一個繪圖參數"#: src/main/par.c:1149msgid "invalid argument passed to par()"msgstr "傳給 par() 的引數無效"#: src/main/par.c:1208#, c-formatmsgid "too many rows in layout, limit %d"msgstr "layout 中的列數太多, 極值為 %d"#: src/main/par.c:1214#, c-formatmsgid "too many columns in layout, limit %d"msgstr "layout 中的行數太多, 極值為 %d"#: src/main/par.c:1216#, c-formatmsgid "too many cells in layout, limit %d"msgstr "layout 中的元素太多, 極值為 %d"#: src/main/paste.c:74 src/main/paste.c:270msgid "invalid separator"msgstr "分隔符號不正確"#: src/main/paste.c:108 src/main/paste.c:291msgid "non-string argument to Internal paste"msgstr "內部貼上的引數不是字串"#: src/main/paste.c:348msgid "first argument must be atomic"msgstr "第一個引數必須是基元"#: src/main/paste.c:504msgid "Impossible mode ( x )"msgstr "這種狀態 (x) 是不可能的"#: src/main/paste.c:589msgid "atomic vector arguments only"msgstr "只能用基元向量引數"#: src/main/platform.c:280 src/main/platform.c:298msgid "invalid filename specification"msgstr "檔案名稱設定不正確"#: src/main/platform.c:424 src/main/platform.c:477msgid "write error during file append"msgstr "檔案附加時寫入發生錯誤"#: src/main/platform.c:438 src/main/platform.c:533 src/main/platform.c:571msgid "invalid first filename"msgstr "第一個檔案名稱不正確"#: src/main/platform.c:440 src/main/platform.c:573msgid "invalid second filename"msgstr "第二個檔案名稱不正確"#: src/main/platform.c:442msgid "nothing to append to"msgstr "沒有可以附加的檔案"#: src/main/platform.c:444msgid "'outFile' must be a single file"msgstr "'outfile' 必須是單一檔案"#: src/main/platform.c:506 src/main/platform.c:709msgid "invalid filename argument"msgstr "filename 引數不正確"#: src/main/platform.c:518#, fuzzy, c-formatmsgid "cannot create file '%s', reason '%s'"msgstr "無法建立先進先出 '%s'，原因是 '%s'"#: src/main/platform.c:545#, fuzzy, c-formatmsgid "cannot remove file '%s', reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/main/platform.c:575msgid "nothing to link"msgstr "沒有可以連結的檔案"#: src/main/platform.c:601#, fuzzy, c-formatmsgid "cannot symlink '%s' to '%s', reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/main/platform.c:609msgid "symlinks are not supported on this platform"msgstr "這個平台不支援符號連結"#: src/main/platform.c:632msgid "'source' must be a single string"msgstr "'source' 必須是單一字串"#: src/main/platform.c:634msgid "'destination' must be a single string"msgstr "'destination' 必須是單一字串"#: src/main/platform.c:638#, fuzzymsgid "missing values are not allowed"msgstr "需要邏輯值的地方有缺值"#: src/main/platform.c:642 src/main/platform.c:652msgid "expanded source name too long"msgstr "擴充的 source 名太長"#: src/main/platform.c:646 src/main/platform.c:656msgid "expanded destination name too long"msgstr "擴充的 destination 名太長"#: src/main/platform.c:660#, fuzzy, c-formatmsgid "cannot rename file '%s' to '%s', reason '%s'"msgstr "無法建立先進先出 '%s'，原因是 '%s'"#: src/main/platform.c:963msgid "invalid 'pattern' regular expression"msgstr "'pattern' 正規表示式不正確"#: src/main/platform.c:985msgid "unable to determine R home location"msgstr "無法確定 R 家目錄位置"#: src/main/platform.c:1037msgid "file name too long"msgstr "檔案名稱太長"#: src/main/platform.c:1085msgid "file.access() is not implemented on this system"msgstr "本系統沒有實作 file.access()"#: src/main/platform.c:1233 src/main/platform.c:1277 src/main/sysutils.c:1537#: src/main/sysutils.c:1551msgid "internal out-of-memory condition"msgstr ""#: src/main/platform.c:1273 src/main/sysutils.c:1547#, fuzzy, c-formatmsgid "read error on '%s'"msgstr "讀取錯誤"#: src/main/platform.c:1431msgid "setting 'LC_NUMERIC' may cause R to function strangely"msgstr "正在設定 'LC_NUMERIC' 可能會使得 R 的運作異常"#: src/main/platform.c:1465#, fuzzy, c-formatmsgid "OS reports request to set locale to \"%s\" cannot be honored"msgstr "作業系統回報無法實現執行請求"#: src/main/platform.c:1765msgid "'hostname' must be a character vector of length 1"msgstr "'hostname' 必須是長度為 1 的字元向量"#: src/main/platform.c:1771#, c-formatmsgid "nsl() was unable to resolve host '%s'"msgstr "nsl() 無法分辨主機 '%s'"#: src/main/platform.c:1778msgid "unknown format returned by gethostbyname"msgstr "gethostbyname 回傳了錯誤的格式"#: src/main/platform.c:1787msgid "nsl() is not supported on this platform"msgstr "本平台不支援 nsl()"#: src/main/platform.c:1836#, c-formatmsgid "'%s' already exists"msgstr "'%s' 已存在"#: src/main/platform.c:1839#, fuzzy, c-formatmsgid "cannot create dir '%s', reason '%s'"msgstr "無法建立先進先出 '%s'，原因是 '%s'"#: src/main/platform.c:1882#, fuzzy, c-formatmsgid "'%ls' already exists"msgstr "'%s' 已存在"#: src/main/platform.c:2105#, fuzzymsgid "'mode' must be of length at least one"msgstr "'hadj' 的長度必須為 1"#: src/main/platform.c:2161#, fuzzymsgid "insufficient OS support on this platform"msgstr "本平台不支援 nsl()"#: src/main/plot.c:109msgid "only NA allowed in logical plotting symbol"msgstr "邏輯繪圖符號中只允許用 NA"#: src/main/plot.c:111msgid "invalid plotting symbol"msgstr "繪圖符號不正確"#: src/main/plot.c:202 src/modules/X11/devX11.c:1537msgid "invalid font specification"msgstr "字型設定不正確"#: src/main/plot.c:279msgid "invalid 'vfont' value [typeface]"msgstr "'vfont' 值不正確 [typeface]"#: src/main/plot.c:303#, fuzzy, c-formatmsgid "invalid 'vfont' value [typeface = %d, fontindex = %d]"msgstr "'vfont' 值不正確 [fontindex]"#: src/main/plot.c:377msgid "invalid graphics parameter"msgstr "繪圖參數不正確"#: src/main/plot.c:466msgid "at least 3 arguments required"msgstr "至少需要三個引數"#: src/main/plot.c:481msgid "\"log=\" specification must be character"msgstr "\"log=\" 必須設定成字元"#: src/main/plot.c:492#, c-formatmsgid "invalid \"log=%s\" specification"msgstr "\"log=%s\" 設定不正確"#: src/main/plot.c:507msgid "NAs not allowed in 'xlim'"msgstr "'xlim' 中不允許 NA"#: src/main/plot.c:513msgid "need finite 'xlim' values"msgstr "'xlim' 值不能是無限的"#: src/main/plot.c:519msgid "NAs not allowed in 'ylim'"msgstr "'ylim' 中不允許 NA"#: src/main/plot.c:525msgid "need finite 'ylim' values"msgstr "'ylim' 值不能是無限的"#: src/main/plot.c:531msgid "Logarithmic axis must have positive limits"msgstr "對數座標不能有負的極值"#: src/main/plot.c:648msgid "invalid type for axis labels"msgstr "座標標記類型不正確"#: src/main/plot.c:923#, c-formatmsgid "invalid axis number %d"msgstr "座標數目 %d 不正確"#: src/main/plot.c:1013msgid "'hadj' must be of length one"msgstr "'hadj' 的長度必須為 1"#: src/main/plot.c:1020 src/main/plot.c:2581msgid "zero length 'padj' specified"msgstr "'padj' 長度不能為零"#: src/main/plot.c:1089#, fuzzymsgid "'labels' is supplied and not 'at'"msgstr "'label' 已提供而非 'at'"#: src/main/plot.c:1093#, fuzzy, c-formatmsgid "'at' and 'labels' lengths differ, %d != %d"msgstr "'at' 和 'label' 的長度不同，%d!=%d"#: src/main/plot.c:1110msgid "no locations are finite"msgstr "不存在有限的位置"#: src/main/plot.c:1467msgid "invalid plotting structure"msgstr "繪圖結構不正確"#: src/main/plot.c:1469#, c-formatmsgid "'x' and 'y' lengths differ in %s()"msgstr "%s() 中的 'x' 和 'y' 的長度不一樣"#: src/main/plot.c:1480#, c-formatmsgid "plot type '%s' will be truncated to first character"msgstr "繪圖類型 '%s' 被截短成第一個字元"#: src/main/plot.c:1484 src/main/plot.c:3191msgid "invalid plot type"msgstr "繪圖類型不正確"#: src/main/plot.c:1684#, c-formatmsgid "invalid plot type '%c'"msgstr "繪圖類型 '%c' 不正確"#: src/main/plot.c:1744msgid "invalid third argument"msgstr "第三個引數不正確"#: src/main/plot.c:1752msgid "invalid fourth argument"msgstr "第四個引數不正確"#: src/main/plot.c:1760msgid "cannot mix zero-length and non-zero-length coordinates"msgstr ""#: src/main/plot.c:1955#, fuzzymsgid "unable to allocate memory (in GPath)"msgstr "無法指派記憶體 (GPolygon)"#: src/main/plot.c:1961#, fuzzymsgid "invalid x or y (in GPath)"msgstr "RNGkind 中的 Normal 類別不正確"#: src/main/plot.c:2084msgid "invalid arrow head length"msgstr "箭頭長度不正確"#: src/main/plot.c:2089msgid "invalid arrow head angle"msgstr "箭頭角度不正確"#: src/main/plot.c:2094msgid "invalid arrow head specification"msgstr "箭頭設定不正確"#: src/main/plot.c:2259 src/main/plot.c:3333msgid "zero length 'labels'"msgstr "'labels' 的長度不能為零"#: src/main/plot.c:2333msgid "no coordinates were supplied"msgstr "沒有座標"#: src/main/plot.c:2539msgid "zero length 'text' specified"msgstr "'text' 長度不能設成零"#: src/main/plot.c:2545msgid "zero length 'side' specified"msgstr "'side' 長度不能設成零"#: src/main/plot.c:2552msgid "zero length 'line' specified"msgstr "'line' 長度不能設成零"#: src/main/plot.c:2560msgid "zero length 'outer' specified"msgstr "'outer' 長度不能設成零"#: src/main/plot.c:2567msgid "zero length 'at' specified"msgstr "'at' 長度不能設成零"#: src/main/plot.c:2574msgid "zero length 'adj' specified"msgstr "'adj' 長度不能設成零"#: src/main/plot.c:2588msgid "zero length 'cex' specified"msgstr "'cex' 長度不能設成零"#: src/main/plot.c:2596msgid "zero length 'col' specified"msgstr "'col' 長度不能設成零"#: src/main/plot.c:2603msgid "zero length 'font' specified"msgstr "'font' 長度不能設成零"#: src/main/plot.c:2966msgid "invalid a=, b= specification"msgstr "a=, b= 設定不正確"#: src/main/plot.c:2975msgid "'a' and 'b' must be finite"msgstr "'a' 和 'b' 的值必須是有限的"#: src/main/plot.c:3186msgid "invalid number of points in locator()"msgstr "locator() 中點的數目不正確"#: src/main/plot.c:3322msgid "invalid number of points in identify()"msgstr "identify() 中點的數目不正確"#: src/main/plot.c:3324msgid "incorrect argument type"msgstr "引數類型不正確"#: src/main/plot.c:3336msgid "different argument lengths"msgstr "引數長度不一樣"#: src/main/plot.c:3338msgid "more 'labels' than points"msgstr ""#: src/main/plot.c:3391#, fuzzy, c-formatmsgid "warning: no point within %.2f inches\n"msgstr "警告: 沒有 %.2f 英呎的點\n"#: src/main/plot.c:3397msgid "warning: nearest point already identified\n"msgstr "警告: 已經找到了最近的點\n"#: src/main/plot.c:3481msgid "invalid units"msgstr "單位不正確"#: src/main/plot.c:3660 src/main/plot.c:3770msgid "invalid dendrogram input"msgstr "dendrogram 輸入不正確"#: src/main/plot.c:3829msgid "invalid symbol parameter vector"msgstr "符號參數向量不正確"#: src/main/plot.c:3852msgid "invalid symbol coordinates"msgstr "符號座標不正確"#: src/main/plot.c:3860msgid "x/y/parameter length mismatch"msgstr "x/y/ 參數長度不一樣"#: src/main/plot.c:3879msgid "invalid circles data"msgstr "圓形資料不正確"#: src/main/plot.c:3881 src/main/plot.c:3900 src/main/plot.c:3924#: src/main/plot.c:3953msgid "invalid symbol parameter"msgstr "符號參數不正確"#: src/main/plot.c:3898msgid "invalid squares data"msgstr "正方形資料不正確"#: src/main/plot.c:3922msgid "invalid rectangles data (need 2 columns)"msgstr "長方形資料不正確 (需要兩欄)"#: src/main/plot.c:3951msgid "invalid stars data"msgstr "星形資料不正確"#: src/main/plot.c:3992msgid "invalid thermometers data (need 3 or 4 columns)"msgstr "溫度計資料不正確 (需要三或四欄)"#: src/main/plot.c:3995#, c-formatmsgid "invalid thermometers[,%s]"msgstr "溫度計[,%s] 不正確"#: src/main/plot.c:3998#, c-formatmsgid "thermometers[,%s] not in [0,1] -- may look funny"msgstr "溫度計[,%s] 在 [0,1] 範圍外 -- 看起來會有點不正確"#: src/main/plot.c:4001msgid "invalid thermometers[,1:2]"msgstr "溫度計[,1:2]"#: src/main/plot.c:4040msgid "invalid boxplots data (need 5 columns)"msgstr "boxplots 資料不正確 (需要五欄)"#: src/main/plot.c:4049msgid "boxplots[,5] outside [0,1] -- may look funny"msgstr "boxplots[,5] 在 [0,1] 範圍外 -- 看起來會有點不正確"#: src/main/plot.c:4051msgid "invalid boxplots[, 1:4]"msgstr "boxplots[, 1:4] 不正確"#: src/main/plot.c:4097msgid "invalid symbol type"msgstr "符號類型不正確"#: src/main/plot.c:4137 src/main/plot.c:4139 src/main/plot.c:4144#: src/main/plot.c:4146#, fuzzy, c-formatmsgid "incorrect length for '%s' argument"msgstr "'mode' 引數的長度不正確"#: src/main/plot.c:4163#, fuzzymsgid "unable to allocate memory (in do_xspline)"msgstr "無法指派記憶體 (GPolygon)"#: src/main/plot3d.c:720 src/main/plot3d.c:1012msgid "contour(): circular/long seglist -- bug.report()!"msgstr "contour():圓的/長的 seglist -- bug.report()!"#: src/main/plot3d.c:803 src/main/plot3d.c:1460msgid "all z values are equal"msgstr "所有的 z 值都一樣"#: src/main/plot3d.c:805 src/main/plot3d.c:1462msgid "all z values are NA"msgstr "所有的 z 值都是 NA"#: src/main/plot3d.c:1424 src/main/plot3d.c:1681msgid "insufficient 'x' or 'y' values"msgstr "'x' 或 'y' 值大小不夠"#: src/main/plot3d.c:1427 src/main/plot3d.c:1684msgid "dimension mismatch"msgstr "維度不相符"#: src/main/plot3d.c:1430 src/main/plot3d.c:1687msgid "no contour values"msgstr "無等高值"#: src/main/plot3d.c:1434msgid "missing 'x' values"msgstr "缺少 'x' 值"#: src/main/plot3d.c:1436msgid "increasing 'x' values expected"msgstr "'x' 值應加大"#: src/main/plot3d.c:1441msgid "missing 'y' values"msgstr "缺少 'y' 值"#: src/main/plot3d.c:1443msgid "increasing 'y' values expected"msgstr "'y' 值應加大"#: src/main/plot3d.c:1448msgid "invalid NA contour values"msgstr "NA 等高值不正確"#: src/main/plot3d.c:1751msgid "invalid x / y values or limits"msgstr "x/y 的值或極值不正確"#: src/main/plot3d.c:1753msgid "invalid contour levels: must be strictly increasing"msgstr "等高層次不正確: 必須嚴格增加"#: src/main/plot3d.c:2413 src/main/plot3d.c:2426msgid "Axis orientation not calculated"msgstr "無法計算座標方位"#: src/main/plot3d.c:2444msgid "too few parameters"msgstr "參數太少"#: src/main/plot3d.c:2476msgid "invalid 'x' limits"msgstr "'x' 極值不正確"#: src/main/plot3d.c:2478msgid "invalid 'y' limits"msgstr "'y' 極值不正確"#: src/main/plot3d.c:2480msgid "invalid 'z' limits"msgstr "'z' 極值不正確"#: src/main/plot3d.c:2501msgid "'xlab' must be a character vector of length 1"msgstr "'xlab' 必須是長度為 1 的字元向量"#: src/main/plot3d.c:2503msgid "'ylab' must be a character vector of length 1"msgstr "'ylab' 必須是長度為 1 的字元向量"#: src/main/plot3d.c:2505msgid "'zlab' must be a character vector of length 1"msgstr "'zlab' 必須是長度為 1 的字元向量"#: src/main/plot3d.c:2525msgid "invalid viewing parameters"msgstr "viewing 參數不正確"#: src/main/plotmath.c:306#, fuzzymsgid "invalid `which' in TeX"msgstr "'which' 設定不正確"#: src/main/plotmath.c:333#, fuzzymsgid "invalid math style encountered"msgstr "座標數目 %d 不正確"#: src/main/plotmath.c:1260 src/main/plotmath.c:1365 src/main/plotmath.c:2664#, fuzzymsgid "invalid mathematical annotation"msgstr "內部函數不正確"#: src/main/plotmath.c:1670#, fuzzymsgid "invalid accent"msgstr "引數不正確"#: src/main/plotmath.c:1964#, fuzzymsgid "invalid group delimiter"msgstr "'x' 極值不正確"#: src/main/plotmath.c:1991 src/main/plotmath.c:2137#, fuzzymsgid "invalid group specification"msgstr "字型設定不正確"#: src/main/plotmath.c:2062#, fuzzymsgid "group is incomplete"msgstr "顯示串列重新整理時不完整"#: src/main/plotmath.c:3151#, fuzzymsgid "Metric information not available for this family/device"msgstr "此連結不能被截短"#: src/main/print.c:142 src/main/print.c:242msgid "invalid 'na.print' specification"msgstr "'na.print' 設定不正確"#: src/main/print.c:151msgid "invalid row labels"msgstr "列標記不正確"#: src/main/print.c:153msgid "invalid column labels"msgstr "行標記不正確"#: src/main/print.c:177#, fuzzymsgid "non-function argument to .Internal(print.function(.))"msgstr "內部貼上的引數不是字串"#: src/main/print.c:252msgid "'gap' must be non-negative integer"msgstr "'gap' 必須是正整數"#: src/main/print.c:276msgid "invalid 'tryS4' internal argument"msgstr "'tryS4' 內部引數不正確"#: src/main/print.c:1007msgid "invalid character length in dblepr"msgstr "dblepr 字元長度不正確"#: src/main/print.c:1025msgid "invalid character length in intpr"msgstr "intpr 字元長度不正確"#: src/main/print.c:1044msgid "invalid character length in realpr"msgstr "realpr 字元長度不正確"#: src/main/print.c:1054msgid "memory allocation error in realpr"msgstr "realpr 記憶體指派錯誤"#: src/main/print.c:1070#, c-formatmsgid "BLAS/LAPACK routine '%6s' gave error code %d"msgstr "BLAS/LAPACK 例行程式 '%6s' 產生了錯誤碼 %d"#: src/main/printarray.c:483msgid "too few row labels"msgstr "列標記不夠"#: src/main/printarray.c:485msgid "too few column labels"msgstr "行標記不夠"#: src/main/printarray.c:519#, c-formatmsgid " [ reached getOption(\"max.print\") -- omitted last row ]]\n"msgid_plural " [ reached getOption(\"max.print\") -- omitted %d rows ]]\n"msgstr[0] ""msgstr[1] ""#: src/main/qsort.c:50msgid "argument is not a numeric vector"msgstr "引數不是數值向量"#: src/main/random.c:82 src/main/random.c:99 src/main/random.c:156#: src/main/random.c:182 src/main/random.c:246 src/main/random.c:260msgid "NAs produced"msgstr "產生了 NA"#: src/main/random.c:96msgid "internal error in do_random1"msgstr "do_random1 產生了內部錯誤"#: src/main/random.c:179msgid "internal error in do_random2"msgstr "do_random2 產生了內部錯誤"#: src/main/random.c:257msgid "internal error in do_random3"msgstr "do_random3 產生了內部錯誤"#: src/main/random.c:440msgid "NA in probability vector"msgstr "機率向量中有 NA"#: src/main/random.c:442msgid "non-positive probability"msgstr "出現非正值機率"#: src/main/random.c:449msgid "too few positive probabilities"msgstr "正值機率太少"#: src/main/random.c:478#, fuzzymsgid "cannot take a sample larger than the population when 'replace = FALSE'"msgstr "當 'replace = FALSE' 時不能取比總體還要大的樣本"#: src/main/random.c:487msgid "incorrect number of probabilities"msgstr "機率數目不正確"#: src/main/random.c:522msgid "invalid first argument 'n'"msgstr "第一引數 'n' 不正確"#: src/main/random.c:524msgid "invalid second argument 'size'"msgstr "第二引數 'size' 不正確"#: src/main/relop.c:98#, c-formatmsgid "comparison (%d) is possible only for atomic and list types"msgstr "只有基元或串列類型才能做比較 (%d)"#: src/main/relop.c:103msgid "comparison is not allowed for expressions"msgstr "運算式不能作比較"#: src/main/relop.c:192msgid "comparison of these types is not implemented"msgstr "這些類型的比較還沒有實作"#: src/main/relop.c:393msgid "invalid comparison with complex values"msgstr "不能與複數值進行比較"#: src/main/saveload.c:199 src/main/saveload.c:204 src/main/saveload.c:213#: src/main/saveload.c:222 src/main/saveload.c:231 src/main/saveload.c:240#: src/main/saveload.c:244 src/main/saveload.c:253 src/main/saveload.c:1369#: src/main/saveload.c:1374 src/main/saveload.c:1418 src/main/saveload.c:1486#: src/main/saveload.c:1495 src/main/serialize.c:330 src/main/serialize.c:337#: src/main/serialize.c:1959 src/main/serialize.c:1967msgid "read error"msgstr "讀取錯誤"#: src/main/saveload.c:331msgid "a I read error occurred"msgstr "發生了 I 類別讀取錯誤"#: src/main/saveload.c:341msgid "a R read error occurred"msgstr "發生了 R 類別讀取錯誤"#: src/main/saveload.c:351msgid "a C read error occurred"msgstr "發生了 C 類別讀取錯誤"#: src/main/saveload.c:361msgid "a S read error occurred"msgstr "發生了 S 類別讀取錯誤"#: src/main/saveload.c:386 src/main/saveload.c:394 src/main/saveload.c:402#: src/main/saveload.c:1582 src/main/saveload.c:1590msgid "a read error occurred"msgstr "發生了讀取錯誤"#: src/main/saveload.c:466msgid "unresolved node during restore"msgstr "復原時遇到了無法解析的節點"#: src/main/saveload.c:487#, c-formatmsgid "restore compatibility error - no version %d compatibility"msgstr "復原相容錯誤：沒有同版本 %d 相容的功能"#: src/main/saveload.c:571 src/main/saveload.c:639msgid "bad SEXP type in data file"msgstr "資料檔案中 SEXP 類型發生錯誤"#: src/main/saveload.c:585msgid "mismatch on types"msgstr "類型不符合"#: src/main/saveload.c:702msgid "cannot save file position while restoring data"msgstr "復原資料的時候無法儲存檔案位置"#: src/main/saveload.c:715msgid "cannot restore file position while restoring data"msgstr "復原資料的時候無法復原檔案位置"#: src/main/saveload.c:908msgid "base namespace is not preserved in version 1 workspaces"msgstr "1 號版本工作空間不能保留基本名稱空間"#: src/main/saveload.c:910msgid "cannot save namespace in version 1 workspaces"msgstr "1 號版本工作空間無法儲存名稱空間"#: src/main/saveload.c:912msgid """cannot save environment with locked/active bindingsin version 1 workspaces"msgstr "1 號版本工作空間不能儲存鎖住的或是仍在用的繫結"#: src/main/saveload.c:936msgid "cannot save weak references in version 1 workspaces"msgstr "1 號版本工作空間無法儲存弱型參考"#: src/main/saveload.c:1014msgid "NewWriteVec called with non-vector type"msgstr "NewWriteVec 不適用於非向量類型"#: src/main/saveload.c:1077msgid "cannot save byte code objects in version 1 workspaces"msgstr "1 號版本工作空間無法儲存位元組碼目的物件"#: src/main/saveload.c:1079#, c-formatmsgid "NewWriteItem: unknown type %i"msgstr "NewWriteItem: 不明類型 %i"#: src/main/saveload.c:1209msgid "NewReadVec called with non-vector type"msgstr "NewReadVec 不適用於非向量類型"#: src/main/saveload.c:1274msgid "cannot read byte code objects from version 1 workspaces"msgstr "無法從 1 號版本工作空間中讀取位元組碼目的物件"#: src/main/saveload.c:1276#, c-formatmsgid "NewReadItem: unknown type %i"msgstr "NewReadItem: 不明類型 %i"#: src/main/saveload.c:1428msgid "out of memory reading ascii string"msgstr "讀取 ascii 字串時記憶體不足"#: src/main/saveload.c:1553msgid "a binary read error occurred"msgstr "二進位讀取時發生了錯誤"#: src/main/saveload.c:1568 src/main/saveload.c:1669msgid "out of memory reading binary string"msgstr "讀取二進位字串時記憶體不足"#: src/main/saveload.c:1573msgid "a binary string read error occurred"msgstr "讀取二進位字串時發生了錯誤"#: src/main/saveload.c:1633msgid "an xdr integer data write error occurred"msgstr "發生了 xdr 整數資料寫入錯誤"#: src/main/saveload.c:1640msgid "an xdr integer data read error occurred"msgstr "發生了 xdr 整數資料讀取錯誤"#: src/main/saveload.c:1655 src/main/saveload.c:1674msgid "an xdr string data write error occurred"msgstr "發生了 xdr 字串資料寫入錯誤"#: src/main/saveload.c:1682msgid "an xdr real data write error occurred"msgstr "發生了 xdr 實數資料寫入錯誤"#: src/main/saveload.c:1689msgid "an xdr real data read error occurred"msgstr "發生了 xdr 實數資料讀取錯誤"#: src/main/saveload.c:1696msgid "an xdr complex data write error occurred"msgstr "發生了 xdr 複數資料寫入錯誤"#: src/main/saveload.c:1703msgid "an xdr complex data read error occurred"msgstr "發生了 xdr 複數資料讀取錯誤"#: src/main/saveload.c:1771 src/main/serialize.c:1609#: src/main/serialize.c:2127 src/modules/internet/internet.c:349#: src/modules/internet/internet.c:407 src/modules/internet/internet.c:512msgid "write failed"msgstr "寫入失敗"#: src/main/saveload.c:1897msgid "restore file may be empty -- no data loaded"msgstr "復原檔案可能是空的 -- 沒有載入任何資料"#: src/main/saveload.c:1899msgid "restore file may be from a newer version of R -- no data loaded"msgstr "復原檔案可能是由比本 R 版本要新的 R 所儲存的 -- 沒有載入任何資料"#: src/main/saveload.c:1901msgid "bad restore file magic number (file may be corrupted) -- no data loaded"msgstr "復原檔案魔術數字發生錯誤 (檔案可能有損壞)-- 沒有載入任何資料"#: src/main/saveload.c:1927 src/main/saveload.c:2215msgid "first argument must be a character vector"msgstr "第一引數必須是字元向量"#: src/main/saveload.c:1999msgid "not a valid named list"msgstr "不是有效的具名串列"#: src/main/saveload.c:2006 src/main/saveload.c:2027#, c-formatmsgid "'%s' looks like a pre-2.4.0 S4 object: please recreate it"msgstr ""#: src/main/saveload.c:2014msgid "loaded data is not in pair list form"msgstr "載入資料不是成雙的串列形式"#: src/main/saveload.c:2050msgid "first argument must be a file name"msgstr "第一引數必須是檔案名稱"#: src/main/saveload.c:2066 src/unix/edit.c:123msgid "unable to open file"msgstr "無法開啟檔案"#: src/main/saveload.c:2098 src/main/saveload.c:2124msgid "XDR write failed"msgstr "XDR 寫入失敗"#: src/main/saveload.c:2111 src/main/saveload.c:2136msgid "XDR read failed"msgstr "XDR 讀取失敗"#: src/main/saveload.c:2147#, fuzzy, c-formatmsgid "cannot save data -- unable to open '%s': %s"msgstr "無法儲存資料 -- 無法開啟 %s"#: src/main/saveload.c:2231 src/main/serialize.c:1802#, c-formatmsgid "cannot save to connections in version %d format"msgstr "不可使用版本 %d 的格式來儲存連結"#: src/main/saveload.c:2249msgid "connection not open for writing"msgstr "無法開啟連結來進行寫入"#: src/main/saveload.c:2258msgid "cannot save XDR format to a text-mode connection"msgstr "不能將XDR格式儲存到文字狀態連結"#: src/main/saveload.c:2268 src/main/serialize.c:1717#: src/main/serialize.c:1731 src/main/serialize.c:1851#: src/main/serialize.c:1873msgid "error writing to connection"msgstr "連結寫入發生了錯誤"#: src/main/saveload.c:2333#, fuzzymsgid "connection not open for reading"msgstr "連結沒有開啟而不能讀"#: src/main/saveload.c:2346msgid "no input is available"msgstr "沒有可用的輸入"#: src/main/saveload.c:2369msgid """the input does not start with a magic number compatible with loading from a ""connection"msgstr "輸入並非以從某個連接所載入的神奇數字開始"#: src/main/scan.c:461#, c-formatmsgid "scan() expected '%s', got '%s'"msgstr "scan() 需要 '%s'，而不是 '%s'"#: src/main/scan.c:647msgid "empty 'what' specified"msgstr "'what' 設定是空的"#: src/main/scan.c:698#, c-formatmsgid "line %d did not have %d elements"msgstr "第 %d 列沒有 %d 個元素"#: src/main/scan.c:750msgid "number of items read is not a multiple of the number of columns"msgstr "讀取的項目數必須是行數的倍數"#: src/main/scan.c:842msgid "invalid 'strip.white' length"msgstr "'strip.white' 的長度不正確"#: src/main/scan.c:853msgid "invalid 'sep' value: must be one byte"msgstr "'sep' 值不正確: 大小只能為一個位元組"#: src/main/scan.c:865msgid "invalid decimal separator: must be one byte"msgstr "十進位分隔符號不正確: 大小只能為一個位元組"#: src/main/scan.c:870msgid "invalid decimal separator"msgstr "十進位分隔符號不正確"#: src/main/scan.c:879 src/main/scan.c:1000 src/main/scan.c:1493msgid "invalid quote symbol set"msgstr "引號符號集不正確"#: src/main/scan.c:1063 src/main/scan.c:1081msgid "string terminated by newline or EOF"msgstr "字串尾是新的一列或是 EOF"#: src/main/scan.c:1201msgid "the first argument must be of mode character"msgstr "第一引數的狀態必須是字元"#: src/main/scan.c:1435#, c-formatmsgid "Selection: "msgstr "選擇: "#: src/main/scan.c:1523 src/main/scan.c:1535#, fuzzymsgid "cannot allocate buffer in 'readTableHead'"msgstr "readTableHead 中無法指派緩衝區"#: src/main/scan.c:1545msgid "\\ followed by EOF"msgstr "EOF 緊接於 \\ 之後"#: src/main/scan.c:1590 src/main/scan.c:1593#, c-formatmsgid "incomplete final line found by readTableHeader on '%s'"msgstr "讀取 '%s' 的 TableHeader 時遇到了不完整的最後一列"#: src/main/scan.c:1701msgid "'file' is not a connection"msgstr "'file' 不是連結"#: src/main/scan.c:1734msgid "'dec' must be a single character"msgstr "'dec' 必須為單一字元"#: src/main/scan.c:1761#, c-formatmsgid "corrupt data frame -- length of column %d does not not match nrows"msgstr "資料框毀損-- 行的長度 %d 與 nrows 不相等"#: src/main/scan.c:1807msgid "corrupt matrix -- dims not not match length"msgstr "矩陣毀損 -- dims 與長度不相等"#: src/main/seq.c:46msgid "unequal factor lengths"msgstr "因子長度不相等"#: src/main/seq.c:98msgid "result would be too long a vector"msgstr "答案向量會太長"#: src/main/seq.c:144 src/main/seq.c:148#, c-formatmsgid "numerical expression has %d elements: only the first used"msgstr "數值運算式一共有 %d 個元素: 只用了第一個"#: src/main/seq.c:146#, fuzzymsgid "argument of length 0"msgstr "引數長度為零"#: src/main/seq.c:152msgid "NA/NaN argument"msgstr "NA/NaN 引數"#: src/main/seq.c:256#, fuzzymsgid "incorrect type for second argument"msgstr "rep() 的第二引數類型不正確"#: src/main/seq.c:259msgid "attempt to replicate non-vector"msgstr "非向量不能被複製"#: src/main/seq.c:518#, fuzzymsgid "'length.out' must be a non-negative number"msgstr "'gap' 必須是正整數"#: src/main/seq.c:532 src/main/seq.c:594 src/main/seq.c:608#, fuzzymsgid "'from' must be finite"msgstr "'a' 和 'b' 的值必須是有限的"#: src/main/seq.c:534 src/main/seq.c:596 src/main/seq.c:626#, fuzzymsgid "'to' must be finite"msgstr "'a' 和 'b' 的值必須是有限的"#: src/main/seq.c:546msgid "invalid '(to - from)/by' in 'seq'"msgstr ""#: src/main/seq.c:554#, fuzzymsgid "'by' argument is much too small"msgstr "'file' 引數太長"#: src/main/seq.c:556#, fuzzymsgid "wrong sign in 'by' argument"msgstr "'mode' 引數的長度不正確"#: src/main/seq.c:610 src/main/seq.c:628#, fuzzymsgid "'by' must be finite"msgstr "'a' 和 'b' 的值必須是有限的"#: src/main/seq.c:681#, fuzzymsgid "argument must be coercible to non-negative integer"msgstr "引數必須是環境物件"#: src/main/serialize.c:224 src/main/serialize.c:254 src/main/serialize.c:277msgid "unknown or inappropriate output format"msgstr "不明或不適當的輸出格式"#: src/main/serialize.c:495msgid "binary format is deprecated; using xdr instead"msgstr "二進位格式不再使用，替之用 xdr 格式"#: src/main/serialize.c:503msgid "must specify ascii, binary, or xdr format"msgstr "必須設定 ascii、binary 或 xdr 格式之一"#: src/main/serialize.c:504msgid "unknown output format"msgstr "不明的輸出格式"#: src/main/serialize.c:535msgid "unknown input format"msgstr "不明的輸入格式"#: src/main/serialize.c:540msgid "input format does not match specified format"msgstr "輸入格式與設定的格式不符合"#: src/main/serialize.c:740msgid "no restore method available"msgstr "沒有復原的方法"#: src/main/serialize.c:771msgid "names in persistent strings are currently ignored"msgstr "固有字串中的名稱現在不用"#: src/main/serialize.c:824#, c-formatmsgid "'%s' may not be available when loading"msgstr "載入時 '%s' 也許不能用"#: src/main/serialize.c:831msgid "namespaces may not be available when loading"msgstr "載入時名稱空間也許不能用"#: src/main/serialize.c:936msgid "this version of R cannot write byte code objects"msgstr "本 R 版本無法寫入位元組碼目的物件"#: src/main/serialize.c:945#, c-formatmsgid "WriteItem: unknown type %i"msgstr "WriteItem：不明的類型 %i"#: src/main/serialize.c:1115#, c-formatmsgid "version %d not supported"msgstr "版本 %d 不支援"#: src/main/serialize.c:1143msgid "reference index out of range"msgstr "參照索引超出範圍"#: src/main/serialize.c:1173msgid "names in persistent strings are not supported yet"msgstr "目前不支援固有字串中的名稱"#: src/main/serialize.c:1382msgid "this version of R cannot read byte code objects"msgstr "本 R 版本無法讀取位元組碼目的物件"#: src/main/serialize.c:1385msgid "this version of R cannot read class references"msgstr "本 R 版本無法讀取類別參照"#: src/main/serialize.c:1387msgid "this version of R cannot read generic function references"msgstr "本 R 版本無法讀取一般功能參照"#: src/main/serialize.c:1398#, c-formatmsgid "ReadItem: unknown type %i, perhaps written by later version of R"msgstr ""#: src/main/serialize.c:1533#, c-formatmsgid """cannot read unreleased workspace version %d written by experimental R %d.%d.%""d"msgstr """無法從由 R 實驗版本 %2$d.%3$d.%4$d 所寫入之尚未被釋放的工作空間版本 %1$d 中讀""取資料"#: src/main/serialize.c:1537#, c-formatmsgid """cannot read workspace version %d written by R %d.%d.%d; need R %d.%d.%d or ""newer"msgstr """無法從由 R 版本 %2$d.%3$d.%4$d 所寫入之工作空間版本 %1$d 中讀取資料；需要 R ""版本 %5$d.%6$d.%7$d 或更新"#: src/main/serialize.c:1616#, fuzzymsgid "read failed"msgstr "XDR 讀取失敗"#: src/main/serialize.c:1679#, fuzzymsgid "error reading from ascii connection"msgstr "從連結讀取時發生了錯誤"#: src/main/serialize.c:1681#, fuzzymsgid "unexpected format in ascii connection"msgstr "無法從此連結讀取"#: src/main/serialize.c:1686 src/main/serialize.c:1700msgid "error reading from connection"msgstr "從連結讀取時發生了錯誤"#: src/main/serialize.c:1741msgid "only ascii format can be written to text mode connections"msgstr "只有 ascii 格式才能對文字狀態的連結進行寫入"#: src/main/serialize.c:1755msgid "only ascii format can be read from text mode connections"msgstr "只有 ascii 格式才能從文字狀態的連結讀取"#: src/main/serialize.c:1800msgid "bad version value"msgstr "不當的版本值"#: src/main/serialize.c:1922 src/main/serialize.c:1949#: src/main/serialize.c:2010msgid "serialization is too large to store in a raw vector"msgstr ""#: src/main/serialize.c:1931msgid "cannot allocate buffer"msgstr "無法指派緩衝區"#: src/main/serialize.c:2105 src/main/serialize.c:2174msgid "not a proper file name"msgstr "檔案名稱不正確"#: src/main/serialize.c:2107msgid "not a proper raw vector"msgstr "非適當純量向量"#: src/main/serialize.c:2128msgid "could not determine file position"msgstr "無法確定檔案位置"#: src/main/serialize.c:2176msgid "bad offset/length argument"msgstr "不當的位移/長度引數"#: src/main/serialize.c:2200 src/main/serialize.c:2213#: src/main/serialize.c:2222 src/main/serialize.c:2232#: src/main/serialize.c:2245#, c-formatmsgid "seek failed on %s"msgstr "搜索 %s 失敗"#: src/main/serialize.c:2217 src/main/serialize.c:2226#: src/main/serialize.c:2236 src/main/serialize.c:2249#, c-formatmsgid "read failed on %s"msgstr "讀取 %s 失敗"#: src/main/serialize.c:2268msgid "bad environment"msgstr "不當的環境"#: src/main/serialize.c:2270msgid "bad variable names"msgstr "不當的變數名稱"#: src/main/sort.c:87msgid "only atomic vectors can be tested to be sorted"msgstr "只有基元向量才能被試著排序"#: src/main/sort.c:309 src/main/sort.c:873 src/main/sort.c:971msgid "'decreasing' must be TRUE or FALSE"msgstr "'increasing' 必須是 TRUE 或是 FALSE"#: src/main/sort.c:312 src/main/sort.c:563msgid "only atomic vectors can be sorted"msgstr "只有基元向量才能被排序"#: src/main/sort.c:314 src/main/sort.c:565 src/main/sort.c:918msgid "raw vectors cannot be sorted"msgstr "無法排序純量向量"#: src/main/sort.c:572msgid "NA index"msgstr "NA 索引"#: src/main/sort.c:574#, c-formatmsgid "index %d outside bounds"msgstr "索引 %d 在界限外"#: src/main/sort.c:882#, c-formatmsgid "argument %d is not a vector"msgstr "引數 %d 不是向量"#: src/main/sort.c:884msgid "argument lengths differ"msgstr "引數長度不同"#: src/main/sort.c:924msgid "invalid ties.method for rank() [should never happen]"msgstr "rank() 的 ties.method 不正確 [這是不應該發生的]"#: src/main/sort.c:978msgid "negative value in 'x'"msgstr "'x' 中有負值"#: src/main/sort.c:989msgid "too large a range of values in 'x'"msgstr "'x' 中的值的範圍太大"#: src/main/source.c:135#, fuzzy, c-formatmsgid "%s%d:%d: %s"msgstr """語法錯誤發生於\n""%d: %s"#: src/main/source.c:140#, fuzzy, c-formatmsgid """%s%d:%d: %s\n""%d: %s\n""%*s"msgstr """語法錯誤發生於\n""%d: %s\n""%d: %s"#: src/main/source.c:147#, fuzzy, c-formatmsgid """%s%d:%d: %s\n""%d: %s\n""%d: %s\n""%*s"msgstr """語法錯誤發生於\n""%d: %s\n""%d: %s"#: src/main/source.c:157#, c-formatmsgid "%s"msgstr ""#: src/main/source.c:160#, c-formatmsgid "%s in \"%s\""msgstr ""#: src/main/source.c:164#, fuzzy, c-formatmsgid """%s in:\n""\"%s\n""%s\""msgstr """語法錯誤發生於:\n""\"%s\n""%s\""#: src/main/source.c:204msgid "coercion of 'text' to character was unsuccessful"msgstr ""#: src/main/source.c:220#, fuzzy, c-formatmsgid "argument '%s = \"%s\"' will be ignored"msgstr "非正數的 'fill' 引數將會被忽略"#: src/main/split.c:38msgid "first argument must be a vector"msgstr "第一引數必須是向量"#: src/main/split.c:40msgid "second argument must be a factor"msgstr "第二引數必須是因子"#: src/main/split.c:45msgid "Group length is 0 but data length > 0"msgstr "Group 長度為零但資料長度 > 0"#: src/main/split.c:47msgid "data length is not a multiple of split variable"msgstr "資料長度不是 split 變數的倍數"#: src/main/split.c:56msgid "factor has bad level"msgstr ""#: src/main/sprintf.c:93#, c-formatmsgid "required resulting string length %d is > maximal %d"msgstr ""#: src/main/sprintf.c:101#, fuzzymsgid "'fmt' is not a character vector"msgstr "'fmt' 必須是字元向量"#: src/main/sprintf.c:106#, fuzzy, c-formatmsgid "only %d arguments are allowed"msgstr "只允許 100 個引數"#: src/main/sprintf.c:113#, fuzzy, c-formatmsgid "invalid type of argument[%d]: '%s'"msgstr "'mode' 引數不正確"#: src/main/sprintf.c:124 src/main/sprintf.c:127msgid "arguments cannot be recycled to the same length"msgstr "不是所有的引數都一樣長"#: src/main/sprintf.c:149#, fuzzy, c-formatmsgid "'fmt' length exceeds maximal format length %d"msgstr "'fmt' 長度超過了緩衝區長度的最大值 %d"#: src/main/sprintf.c:167#, fuzzy, c-formatmsgid "unrecognised format specification '%s'"msgstr "顏色設定不正確"#: src/main/sprintf.c:178 src/main/sprintf.c:184 src/main/sprintf.c:197#: src/main/sprintf.c:204#, c-formatmsgid "reference to non-existent argument %d"msgstr "參照不存在的引數 %d"#: src/main/sprintf.c:216#, fuzzymsgid "at most one asterisk '*' is supported in each conversion specification"msgstr "在任一轉換指定中最多只支援一個星號 '*'"#: src/main/sprintf.c:226#, fuzzymsgid "argument for '*' conversion specification must be a number"msgstr "'*' 轉換指定的引數必須是一個數字"#: src/main/sprintf.c:255#, fuzzymsgid "the '%*' constructed 'fmt2' length exceeds maximum of %d"msgstr "'fmt' 長度超過了緩衝區長度的最大值 %d"#: src/main/sprintf.c:264msgid "coercion has changed vector length to 0"msgstr "強制變更時將向量長度改為 0"#: src/main/sprintf.c:337 src/main/sprintf.c:351 src/main/sprintf.c:365#: src/main/sprintf.c:400#, fuzzy, c-formatmsgid "invalid format '%s'; %s"msgstr "'n' 的值不正確"#: src/main/sprintf.c:338#, c-formatmsgid "use format %d or %i for logical objects"msgstr "邏輯目的物件套用格式 %d 或 %i"#: src/main/sprintf.c:352#, fuzzy, c-formatmsgid "use format %d, %i, %o, %x or %X for integer objects"msgstr "整數目的物件套用格式 %d、%i、%x 或 %X"#: src/main/sprintf.c:366#, fuzzy, c-formatmsgid "use format %f, %e, %g or %a for numeric objects"msgstr "數值目的物件套用格式 %f、%e 或 %g"#: src/main/sprintf.c:401#, c-formatmsgid "use format %s for character objects"msgstr "字元目的物件套用格式 %s"#: src/main/sprintf.c:406#, fuzzy, c-formatmsgid "likely truncation of character string to %d characters"msgstr "字串很可能被截短"#: src/main/sprintf.c:415msgid "unsupported type"msgstr "不支援此一類型"#: src/main/startup.c:66msgid "R_LibraryFileName: buffer too small"msgstr "R_LibraryFileName: 緩衝區太小"#: src/main/subassign.c:105msgid "attempt to enlarge non-vector"msgstr "不能加大非向量"#: src/main/subassign.c:110#, c-formatmsgid "assignment outside vector/list limits (extending from %d to %d)"msgstr "不能在向量/串列極值外賦值(%d 加大到 %d)"#: src/main/subassign.c:357#, c-formatmsgid "incompatible types (from %s to %s) in subassignment type fix"msgstr "下賦值 fix 類型中有不相容的類型 (從 %s 到 %s)"#: src/main/subassign.c:456 src/main/subassign.c:731 src/main/subassign.c:734#: src/main/subassign.c:1020msgid "NAs are not allowed in subscripted assignments"msgstr "下標賦值中不允許 NA"#: src/main/subassign.c:474 src/main/subassign.c:745 src/main/subassign.c:1012#: src/main/subassign.c:1528#, fuzzymsgid "replacement has length zero"msgstr "引數長度為零"#: src/main/subassign.c:476 src/main/subassign.c:747 src/main/subassign.c:1014msgid "number of items to replace is not a multiple of replacement length"msgstr "被替換的項目不是替換值長度的倍數"#: src/main/subassign.c:713msgid "incorrect number of subscripts on matrix"msgstr "矩陣中的下標數目不正確"#: src/main/subassign.c:964#, c-formatmsgid "incompatible types (from %s to %s) in matrix subset assignment"msgstr "矩陣子集賦值中有不相容的類型 (從 %s 到 %s)"#: src/main/subassign.c:1148#, c-formatmsgid "incompatible types (from %s to %s) in array subset assignment"msgstr "陣列子集賦值有不相容的類型 (從 %s 到 %s)"#: src/main/subassign.c:1182 src/main/subassign.c:1202#, fuzzymsgid "invalid subscript in list assign"msgstr "串列賦值中的下標數目不正確"#: src/main/subassign.c:1195msgid "invalid number of subscripts to list assign"msgstr "串列賦值中的下標數目不正確"#: src/main/subassign.c:1284msgid "SubAssignArgs: invalid number of arguments"msgstr "SubAssignArgs: 引數數目不正確"#: src/main/subassign.c:1396msgid "result is zero-length and so cannot be a language object"msgstr ""#: src/main/subassign.c:1500 src/main/subassign.c:1838msgid "no method for assigning subsets of this S4 class"msgstr ""#: src/main/subassign.c:1506msgid "wrong args for environment subassignment"msgstr "環境下賦值的引數不正確"#: src/main/subassign.c:1530msgid "more elements supplied than there are to replace"msgstr "用來替換的元素比所要替換的值多"#: src/main/subassign.c:1532msgid "[[ ]] with missing subscript"msgstr "[[ ]] 缺少下標"#: src/main/subassign.c:1543 src/main/subassign.c:1560msgid "[[ ]] subscript out of bounds"msgstr "[[ ]] 下標在界限外"#: src/main/subassign.c:1549 src/main/subassign.c:1730msgid "[[ ]] improper number of subscripts"msgstr "[[ ]] 下標數目不正確"#: src/main/subassign.c:1696#, c-formatmsgid "incompatible types (from %s to %s) in [[ assignment"msgstr " [[ 賦值中有不相容的類型 (從 %s 到 %s)"#: src/main/subassign.c:1740#, c-formatmsgid "[[ ]] subscript (%d) out of bounds"msgstr "[[ ]] 下標 (%d) 在界限外"#: src/main/subassign.c:1793 src/main/subscript.c:134 src/main/subscript.c:136#: src/main/subscript.c:240 src/main/subscript.c:242 src/main/subscript.c:615#: src/main/subscript.c:617 src/main/subscript.c:716 src/main/subscript.c:718#: src/main/subset.c:987#, fuzzy, c-formatmsgid "invalid subscript type '%s'"msgstr "下標類型不正確"#: src/main/subassign.c:1893msgid "Coercing LHS to a list"msgstr "把公式左側強迫變成串列"#: src/main/subscript.c:50 src/main/subscript.c:70 src/main/subscript.c:163msgid "attempt to select less than one element"msgstr "至少要選擇一個元素"#: src/main/subscript.c:54 src/main/subscript.c:67 src/main/subscript.c:161#: src/main/subscript.c:258msgid "attempt to select more than one element"msgstr "最多只能選擇一個元素"#: src/main/subscript.c:167msgid "internal error in use of recursive indexing"msgstr "用遞迴索引時發生了內部錯誤"#: src/main/subscript.c:221#, c-formatmsgid "further partial match of '%s' to '%s'"msgstr ""#: src/main/subscript.c:256#, c-formatmsgid "recursive indexing failed at level %d\n"msgstr "遞迴索引在 %d 層失敗\n"#: src/main/subscript.c:263#, c-formatmsgid "no such index at level %d\n"msgstr "在 %d 層沒有此一索引\n"#: src/main/subscript.c:287msgid "incorrect number of columns in matrix subscript"msgstr "矩陣下標中行數不正確"#: src/main/subscript.c:305msgid "negative values are not allowed in a matrix subscript"msgstr "矩陣下標中不允許負值"#: src/main/subscript.c:378msgid "(subscript) logical subscript too long"msgstr "(下標) 邏輯下標太長"#: src/main/subscript.c:463msgid "only 0's may be mixed with negative subscripts"msgstr "只有負數下標中才能有 0"#: src/main/subscript.c:528msgid "character vector element does not have type CHARSXP"msgstr "字元向量元素沒有 CHARSXP 類型"#: src/main/subscript.c:606msgid "no 'dimnames' attribute for array"msgstr "陣列中沒有 'dimnames' 此一屬性"#: src/main/subscript.c:653msgid "subscripting on non-vector"msgstr "非向量不能有下標"#: src/main/subset.c:275 src/main/subset.c:304msgid "matrix subscripting not handled for this type"msgstr "此一類型無法處理矩陣下標"#: src/main/subset.c:461msgid "array subscripting not handled for this type"msgstr "此一類型無法處理陣列下標"#: src/main/subset.c:717msgid "incorrect number of dimensions"msgstr "維度數目不正確"#: src/main/subset.c:811msgid "no index specified"msgstr "沒有指定的索引"#: src/main/subset.c:821#, fuzzymsgid "this S4 class is not subsettable"msgstr "目的物件不是次集合表格"#: src/main/subset.c:827msgid "wrong arguments for subsetting an environment"msgstr "取子集環境時的引數不正確"#: src/main/summary.c:26#, fuzzy, c-formatmsgid "invalid 'type' (%s) of argument"msgstr "'mode' 引數不正確"#: src/main/summary.c:61 src/main/summary.c:576#, fuzzymsgid "Integer overflow - use sum(as.numeric(.))"msgstr "sum(.) 中整數上溢；請用 sum(as.numeric(.))"#: src/main/summary.c:479#, c-formatmsgid "internal error ('op = %d' in do_summary).\t Call a Guru"msgstr "內部錯誤 (do_summary 中的 'op = %d')。\t 請向專家請教"#: src/main/summary.c:684#, fuzzymsgid "no non-missing arguments, returning NA"msgstr "min 中沒有無漏失的引數; 回傳 Inf"#: src/main/summary.c:687msgid "no non-missing arguments to min; returning Inf"msgstr "min 中沒有無漏失的引數; 回傳 Inf"#: src/main/summary.c:689msgid "no non-missing arguments to max; returning -Inf"msgstr "max 中沒有無漏失的引數；回傳 -Inf"#: src/main/summary.c:798#, fuzzymsgid "argument to 'which' is not logical"msgstr "引數 'logarithm' 必須是邏輯值"#: src/main/summary.c:907msgid "no input has determined the number of cases"msgstr ""#: src/main/summary.c:1010msgid "not all arguments have the same length"msgstr "不是所有的引數都一樣長"#: src/main/summary.c:1029#, fuzzymsgid "no arguments"msgstr "引數數目太少"#: src/main/summary.c:1040 src/main/summary.c:1057#, fuzzymsgid "invalid input type"msgstr "無效的列類型"#: src/main/summary.c:1062msgid "cannot mix 0-length vectors with others"msgstr ""#: src/main/sysutils.c:68#, c-formatmsgid "cannot determine file modification time of '%s'"msgstr "無法確定檔案 '%s' 的修改時間"#: src/main/sysutils.c:161#, fuzzymsgid "file name conversion problem"msgstr "檔案名稱太長"#: src/main/sysutils.c:162#, fuzzymsgid "file name conversion problem -- name too long?"msgstr "檔案名稱太長"#: src/main/sysutils.c:227msgid "invalid filename pattern"msgstr "檔案名稱式樣不正確"#: src/main/sysutils.c:231msgid "no 'pattern'"msgstr "沒有 'pattern'"#: src/main/sysutils.c:233msgid "no 'tempdir'"msgstr "沒有 'tempdir'"#: src/main/sysutils.c:319 src/main/sysutils.c:322 src/main/sysutils.c:413#: src/main/sysutils.c:415 src/main/sysutils.c:451msgid "wrong type for argument"msgstr "引數類型不正確"#: src/main/sysutils.c:417#, fuzzymsgid "wrong length for argument"msgstr "'mode' 引數的長度不正確"#: src/main/sysutils.c:438#, fuzzymsgid "'Sys.setenv' is not available on this system"msgstr "'putenv' 本系統沒有這個功能"#: src/main/sysutils.c:482msgid "this system cannot unset environment variables: setting to \"\""msgstr ""#: src/main/sysutils.c:493#, fuzzymsgid "'Sys.unsetenv' is not available on this system"msgstr "'putenv' 本系統沒有這個功能"#: src/main/sysutils.c:558msgid "'x' must be a character vector"msgstr "'x' 必須是字元向量"#: src/main/sysutils.c:652 src/main/sysutils.c:713 src/main/sysutils.c:816#: src/main/sysutils.c:890#, fuzzy, c-formatmsgid "'%s' must be called on a CHARSXP"msgstr "csduplicated 不能用於 STRSXP"#: src/main/sysutils.c:1321msgid "cannot mkdir R_TempDir"msgstr "無法執行 mkdir R_TempDir"#: src/main/sysutils.c:1325 src/main/sysutils.c:1332 src/main/sysutils.c:1335msgid "unable to set R_SESSION_TMPDIR"msgstr ""#: src/main/sysutils.c:1344msgid "cannot allocate R_TempDir"msgstr "無法指派 R_TempDir"#: src/main/sysutils.c:1363msgid "invalid 'tempdir' in R_tmpnam"msgstr "R_tmpnam 中的 'tempdir' 無效"#: src/main/sysutils.c:1378msgid "cannot find unused tempfile name"msgstr "暫時檔案名都用盡"#: src/main/sysutils.c:1381#, fuzzymsgid "allocation failed in R_tmpnam"msgstr "指派 GVText 失敗"#: src/main/sysutils.c:1407msgid "proc.time() is not implemented on this system"msgstr "本系統沒有實作 proc.time() 此一功能"#: src/main/sysutils.c:1459#, fuzzymsgid "setTimelimit() is not implemented on this system"msgstr "本系統沒有實作 gc.time()"#: src/main/sysutils.c:1487#, fuzzymsgid "setSessionTimelimit() is not implemented on this system"msgstr "本系統沒有實作 gc.time()"#: src/main/sysutils.c:1525#, fuzzymsgid "'dirmark = TRUE' is not supported on this platform"msgstr "本平台不支援 'recursive=TRUE'"#: src/main/unique.c:302#, c-formatmsgid "length %d is too large for hashing"msgstr "用雜亂定址法時長度 %d 太長"#: src/main/unique.c:401msgid "'duplicated' applies only to vectors"msgstr "'duplicated' 只適用於向量"#: src/main/unique.c:489msgid "any_duplicated3(., <0-length incomp>)"msgstr ""#: src/main/unique.c:543#, c-formatmsgid "%s() applies only to vectors"msgstr "%s() 只適用於向量"#: src/main/unique.c:777msgid "'match' requires vector arguments"msgstr "'match' 需要向量引數"#: src/main/unique.c:824 src/main/unique.c:954msgid "argument is not of mode character"msgstr "引數不是字元狀態"#: src/main/unique.c:1061msgid "... used in a situation where it doesn't exist"msgstr "... 用在它不存在的地方了"#: src/main/unique.c:1152msgid "unable to find a closure from within which 'match.call' was called"msgstr ""#: src/main/unique.c:1304msgid "non-numeric matrix in rowsum(): this cannot happen"msgstr "rowsum() 中出現了非數值矩陣：這不應該發生"#: src/main/unique.c:1338msgid "non-numeric data frame in rowsum"msgstr "rowsum 中不能有非數值資料框"#: src/main/unique.c:1364msgid "this cannot happen"msgstr "這不可能發生"#: src/main/unique.c:1420msgid "'names' must be a character vector"msgstr "'names' 必須是字元向量"#: src/main/unique.c:1424msgid "'sep' must be a character string"msgstr "'sep' 必須是字串"#: src/main/unique.c:1496msgid "csduplicated not called on a STRSXP"msgstr "csduplicated 不能用於 STRSXP"#: src/main/util.c:83 src/main/util.c:101msgid "object is not a matrix"msgstr "目的物件不是矩陣"#: src/main/util.c:248 src/main/util.c:260 src/main/util.c:274#, c-formatmsgid "type %d is unimplemented in '%s'"msgstr "'%2$s' 中尚未實作類型 %1$d"#: src/main/util.c:284#, c-formatmsgid "unimplemented type '%s' in '%s'\n"msgstr "類型 '%s' 尚未在 '%s' 中實作\n"#: src/main/util.c:286#, c-formatmsgid "unimplemented type (%d) in '%s'\n"msgstr "(%d) 類型尚未在 '%s' 中實作\n"#: src/main/util.c:411msgid "invalid tag in name extraction"msgstr "抽取名稱的標記不正確"#: src/main/util.c:421#, fuzzy, c-formatmsgid "%d argument passed to .Internal(%s) which requires %d"msgid_plural "%d arguments passed to .Internal(%s) which requires %d"msgstr[0] "傳給了 'atan' %d 個引數，但它只需要一個"#: src/main/util.c:427#, fuzzy, c-formatmsgid "%d argument passed to '%s' which requires %d"msgid_plural "%d arguments passed to '%s' which requires %d"msgstr[0] "給了 'log'%d 個引數，但它最多只能用兩個引數"#: src/main/util.c:442#, c-formatmsgid "supplied argument name '%s' does not match '%s'"msgstr ""#: src/main/util.c:452#, fuzzy, c-formatmsgid "'nthcdr' list shorter than %d"msgstr "\"nthcdr\" 串列比 %d 要短"#: src/main/util.c:457#, fuzzymsgid "'nthcdr' needs a list to CDR down"msgstr "\"nthcdr\" 需要 CDR 串列"#: src/main/util.c:577msgid "'all.x' must be TRUE or FALSE"msgstr "'all.x' 必須是 TRUE 或 FALSE"#: src/main/util.c:579msgid "'all.y' must be TRUE or FALSE"msgstr "'all.y' 必須是 TRUE 或 FALSE"#: src/main/util.c:691#, fuzzymsgid "missing value is invalid"msgstr "參數中不能有缺值"#: src/main/util.c:700 src/main/util.c:709msgid "cannot change working directory"msgstr "無法變更工作目錄"#: src/main/util.c:728 src/main/util.c:762 src/main/util.c:803#: src/main/util.c:843 src/main/util.c:880 src/main/util.c:930#: src/main/util.c:951msgid "a character vector argument expected"msgstr "需要字元向量引數"#: src/main/util.c:735 src/main/util.c:770 src/main/util.c:811#: src/main/util.c:851msgid "path too long"msgstr "路徑太長"#: src/main/util.c:894msgid "only the first character of 'quote' will be used"msgstr "只用了 'quote' 的第一個字元"#: src/main/util.c:953#, fuzzymsgid "a character vector 'value' expected"msgstr "需要字元向量引數"#: src/main/util.c:956#, fuzzymsgid "'value' must be of positive length"msgstr "引數的長度必須是正數"#: src/main/util.c:1082 src/main/util.c:1090#, fuzzy, c-formatmsgid "invalid input '%s' in 'utf8towcs'"msgstr "Rmbstowcs 中的輸入無效"#: src/main/util.c:1175#, fuzzy, c-formatmsgid "invalid multibyte string at '%s'"msgstr "多位元組字串 %d 不正確"#: src/main/util.c:1283msgid "error message truncated to 255 chars"msgstr "錯誤訊息截短到 255 個位元組"#: src/main/util.c:1296msgid "warning message truncated to 255 chars"msgstr "警告訊息截短到 255 個位元組"#: src/main/util.c:1751#, fuzzymsgid "ICU is not supported on this build"msgstr "本平台不支援 nsl()"#: src/main/version.c:42msgid """R is free software and comes with ABSOLUTELY NO WARRANTY.\n""You are welcome to redistribute it under certain conditions.\n""Type 'license()' or 'licence()' for distribution details.\n""\n"msgstr """R 是免費軟體，不提供任何擔保。\n""在某些條件下您可以將其自由散布。\n""用 'license()' 或 'licence()' 來獲得散布的詳細條件。\n""\n"#: src/main/version.c:45msgid """R is a collaborative project with many contributors.\n""Type 'contributors()' for more information and\n""'citation()' on how to cite R or R packages in publications.\n""\n"msgstr """R 是個合作計劃，有許多人為之做出了貢獻。\n""用 'contributors()' 來看詳細的情況並且\n""用 'citation()' 會告訴您如何在出版品中正確地參照 R 或 R 套件。\n""\n"#: src/main/version.c:48msgid """Type 'demo()' for some demos, 'help()' for on-line help, or\n""'help.start()' for an HTML browser interface to help.\n""Type 'q()' to quit R.\n""\n"msgstr """用 'demo()' 來看一些示範程式，用 'help()' 來檢視線上輔助檔案，或\n""用 'help.start()' 透過 HTML 瀏覽器來看輔助檔案。\n""用 'q()' 離開 R。\n""\n"#: src/main/vfonts.c:50msgid "vfont routines cannot be accessed in module"msgstr "模組中沒有 vfont 例行程式"#: src/main/vfonts.c:67 src/main/vfonts.c:80 src/main/vfonts.c:98msgid "Hershey fonts cannot be loaded"msgstr "無法載入 Hershey 字型"#: src/main/xspline.c:58#, c-formatmsgid "add_point - reached MAXNUMPTS (%d)"msgstr "add_point - 已達到 MAXNUMPTS (%d)"#: src/main/xspline.c:72msgid "insufficient memory to allocate point array"msgstr "配置點陣列時記憶體不足"#: src/main/xspline.c:470msgid "There must be at least two control points"msgstr "至少必須有兩個控制點"#: src/main/xspline.c:472msgid "There must be at least four control points"msgstr "至少必須有四個控制點"#: src/main/xspline.c:532msgid "There must be at least three control points"msgstr "至少必須有三個控制點"#: src/modules/internet/internet.c:186 src/modules/internet/internet.c:190#: src/modules/internet/internet.c:196 src/modules/internet/internet.c:208msgid "allocation of url connection failed"msgstr "url 連結指派失敗"#: src/modules/internet/internet.c:285msgid "only first element of 'url' argument used"msgstr "只用 'url' 引數的第一個元素"#: src/modules/internet/internet.c:291msgid "only first element of 'destfile' argument used"msgstr "只用 'destfile' 引數的第一個元素"#: src/modules/internet/internet.c:316msgid "Download progress"msgstr "正在下載"#: src/modules/internet/internet.c:338#, fuzzy, c-formatmsgid "cannot open URL '%s', reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/modules/internet/internet.c:344 src/modules/internet/internet.c:370#: src/modules/internet/internet.c:472#, fuzzy, c-formatmsgid "cannot open destfile '%s', reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/modules/internet/internet.c:375 src/modules/internet/internet.c:477#, c-formatmsgid "trying URL '%s'\n"msgstr "試開URL '%s'\n"#: src/modules/internet/internet.c:382 src/modules/internet/internet.c:484msgid "opened URL\n"msgstr "開啟了 URL\n"#: src/modules/internet/internet.c:454 src/modules/internet/internet.c:559#, c-formatmsgid "downloaded length %d != reported length %d"msgstr "下載的長度 %d != 報告的長度 %d"#: src/modules/internet/internet.c:458 src/modules/internet/internet.c:563#, c-formatmsgid "cannot open URL '%s'"msgstr "無法開啟 URL '%s'"#: src/modules/internet/internet.c:591 src/modules/internet/internet.c:826#, c-formatmsgid "cannot open: HTTP status was '%d %s'"msgstr "無法開啟: HTTP 狀態是 '%d%s'"#: src/modules/internet/internet.c:770 src/modules/internet/internet.c:933msgid "InternetOpenUrl timed out"msgstr "InternetOpenUrl 已經逾時"#: src/modules/internet/internet.c:797 src/modules/internet/internet.c:811#: src/modules/internet/internet.c:955 src/modules/internet/internet.c:964#, c-formatmsgid "InternetOpenUrl failed: '%s'"msgstr "InternetOpenUrl 失敗: '%s'"#: src/modules/internet/internet.c:868msgid "Internet read timed out"msgstr "網際網路讀取逾時"#: src/modules/internet/nanoftp.c:288 src/modules/internet/nanoftp.c:301#: src/modules/internet/nanoftp.c:312 src/modules/internet/nanoftp.c:346#: src/modules/internet/nanoftp.c:356msgid "RxmlNanoFTPScanURL: overlong (invalid?) URL"msgstr ""#: src/modules/internet/nanoftp.c:389msgid "removing FTP proxy info"msgstr "刪除 FTP 代理主機資訊"#: src/modules/internet/nanoftp.c:391#, c-formatmsgid "using FTP proxy '%s'"msgstr "用 FTP 代理主機 '%s'"#: src/modules/internet/nanoftp.c:402 src/modules/internet/nanoftp.c:431msgid "RxmlNanoFTPScanProxy: overlong (invalid?) URL"msgstr ""#: src/modules/internet/nanoftp.c:830msgid "cannot resolve host"msgstr "無法分辨主機"#: src/modules/internet/nanoftp.c:860msgid "failed to connect to server"msgstr "連線不上伺服器"#: src/modules/internet/nanoftp.c:871msgid "failed to get response from server"msgstr "伺服器沒有反應"#: src/modules/internet/nanoftp.c:1134msgid "RxmlNanoFTPGetConnection: failed to create socket"msgstr "RxmlNanoFTPGetConnection: 建立插槽失敗"#: src/modules/internet/nanoftp.c:1180msgid "failed to create a data connection"msgstr "建立資料連結失敗"#: src/modules/internet/nanoftp.c:1188msgid "failed to bind a port"msgstr "連線通訊埠失敗"#: src/modules/internet/nanoftp.c:1195#, c-formatmsgid "could not listen on port %d"msgstr "無法從通訊埠 %d 聽取資料"#: src/modules/internet/nanohttp.c:362 src/modules/internet/nanohttp.c:390#: src/modules/internet/nanohttp.c:399msgid "RxmlNanoHTTPScanURL: overlong (invalid?) URL"msgstr ""#: src/modules/internet/nanohttp.c:433msgid "removing HTTP proxy info"msgstr "刪除 HTTP 代理主機資訊"#: src/modules/internet/nanohttp.c:435#, c-formatmsgid "using HTTP proxy '%s'"msgstr "用 HTTP 代理主機 '%s'"#: src/modules/internet/nanohttp.c:446 src/modules/internet/nanohttp.c:482msgid "RxmlNanoHTTPScanProxy: overlong (invalid?) URL"msgstr ""#: src/modules/internet/nanohttp.c:1095#, fuzzy, c-formatmsgid "unable to resolve '%s'"msgstr "無法分辨 '%s'。"#: src/modules/internet/nanohttp.c:1122#, c-formatmsgid "connected to '%s' on port %d."msgstr "透過通訊埠 %2$d 接通到 '%1$s'。"#: src/modules/internet/nanohttp.c:1127#, c-formatmsgid "unable to connect to '%s' on port %d."msgstr "無法透過通訊埠 %2$d 連線到 '%1$s'。"#: src/modules/internet/nanohttp.c:1430#, c-formatmsgid "redirect to: '%s'"msgstr "重新傳送到: '%s'"#: src/modules/internet/nanohttp.c:1440msgid "too many redirects, aborting ..."msgstr "太多重新傳送，中斷工作 ..."#: src/modules/internet/sockconn.c:176 src/modules/internet/sockconn.c:180#: src/modules/internet/sockconn.c:186 src/modules/internet/sockconn.c:199msgid "allocation of socket connection failed"msgstr "指派插槽連結失敗"#: src/modules/lapack/Lapack.c:45 src/modules/lapack/Lapack.c:64#, fuzzy, c-formatmsgid "argument type[1]='%s' must be a character string of string length 1"msgstr "引數必須是長度為 1 的字元向量"#: src/modules/lapack/Lapack.c:53#, c-formatmsgid "argument type[1]='%s' must be one of 'M','1','O','I','F' or 'E'"msgstr ""#: src/modules/lapack/Lapack.c:70#, c-formatmsgid "argument type[1]='%s' must be one of '1','O', or 'I'"msgstr ""#: src/modules/lapack/Lapack.c:85 src/modules/lapack/Lapack.c:707msgid "'jobu' and 'jobv' must be character strings"msgstr "'jobu' 和 'jobv' 必須是字元目的物件"#: src/modules/lapack/Lapack.c:87msgid "'method' must be a character string"msgstr "'method' 必須是字串"#: src/modules/lapack/Lapack.c:108 src/modules/lapack/Lapack.c:117#: src/modules/lapack/Lapack.c:172 src/modules/lapack/Lapack.c:183#: src/modules/lapack/Lapack.c:258 src/modules/lapack/Lapack.c:264#: src/modules/lapack/Lapack.c:587 src/modules/lapack/Lapack.c:593#: src/modules/lapack/Lapack.c:637 src/modules/lapack/Lapack.c:644#: src/modules/lapack/Lapack.c:648 src/modules/lapack/Lapack.c:682#: src/modules/lapack/Lapack.c:689 src/modules/lapack/Lapack.c:720#: src/modules/lapack/Lapack.c:729 src/modules/lapack/Lapack.c:775#: src/modules/lapack/Lapack.c:781 src/modules/lapack/Lapack.c:836#: src/modules/lapack/Lapack.c:842 src/modules/lapack/Lapack.c:1008#: src/modules/lapack/Lapack.c:1014 src/modules/lapack/Lapack.c:1053#: src/modules/lapack/Lapack.c:1060 src/modules/lapack/Lapack.c:1064#: src/modules/lapack/Lapack.c:1093 src/modules/lapack/Lapack.c:1100#: src/modules/lapack/Lapack.c:1124#, c-formatmsgid "error code %d from Lapack routine '%s'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:151 src/modules/lapack/Lapack.c:237#: src/modules/lapack/Lapack.c:762 src/modules/lapack/Lapack.c:815msgid "'x' must be a square numeric matrix"msgstr "'x' 必須是正方形的數值矩陣"#: src/modules/lapack/Lapack.c:313#, fuzzymsgid "'type' must be a character string"msgstr "'title' 必須為字串"#: src/modules/lapack/Lapack.c:320 src/modules/lapack/Lapack.c:354#: src/modules/lapack/Lapack.c:411#, fuzzymsgid "'A' must be a numeric matrix"msgstr "'a' 必須是數值矩陣"#: src/modules/lapack/Lapack.c:347 src/modules/lapack/Lapack.c:403#: src/modules/lapack/Lapack.c:445 src/modules/lapack/Lapack.c:494#, fuzzymsgid "'norm' must be a character string"msgstr "'msg1' 必須是字串"#: src/modules/lapack/Lapack.c:375#, fuzzy, c-formatmsgid "error [%d] from Lapack 'dgetrf()'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:380#, c-formatmsgid "exact singularity: U[%d,%d] = 0 in LU-decomposition {Lapack 'dgetrf()'}"msgstr ""#: src/modules/lapack/Lapack.c:392#, fuzzy, c-formatmsgid "error [%d] from Lapack 'dgecon()'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:417 src/modules/lapack/Lapack.c:451#: src/modules/lapack/Lapack.c:500#, fuzzymsgid "'A' must be a *square* matrix"msgstr "'a' 必須是正方形矩陣"#: src/modules/lapack/Lapack.c:431#, fuzzy, c-formatmsgid "error [%d] from Lapack 'dtrcon()'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:447 src/modules/lapack/Lapack.c:496#, fuzzymsgid "'A' must be a complex matrix"msgstr "'a' 必須是複數矩陣"#: src/modules/lapack/Lapack.c:469#, fuzzy, c-formatmsgid "error [%d] from Lapack 'zgetrf()'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:477#, fuzzy, c-formatmsgid "error [%d] from Lapack 'zgecon()'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:481 src/modules/lapack/Lapack.c:515#: src/modules/lapack/Lapack.c:559 src/modules/lapack/Lapack.c:609#: src/modules/lapack/Lapack.c:652 src/modules/lapack/Lapack.c:693#: src/modules/lapack/Lapack.c:742 src/modules/lapack/Lapack.c:798#: src/modules/lapack/Lapack.c:859msgid "Fortran complex functions are not available on this platform"msgstr "本平台不能使用 Fortran 複數功能"#: src/modules/lapack/Lapack.c:512#, fuzzy, c-formatmsgid "error [%d] from Lapack 'ztrcon()'"msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'"#: src/modules/lapack/Lapack.c:530 src/modules/lapack/Lapack.c:573msgid "'a' must be a complex matrix"msgstr "'a' 必須是複數矩陣"#: src/modules/lapack/Lapack.c:532 src/modules/lapack/Lapack.c:623#: src/modules/lapack/Lapack.c:666msgid "'b' must be a complex matrix"msgstr "'b' 必須是複數矩陣"#: src/modules/lapack/Lapack.c:537 src/modules/lapack/Lapack.c:959msgid "'a' is 0-diml"msgstr "'a' 是 0-diml"#: src/modules/lapack/Lapack.c:539 src/modules/lapack/Lapack.c:961msgid "no right-hand side in 'b'"msgstr "'b' 在等號右側沒有公式"#: src/modules/lapack/Lapack.c:541 src/modules/lapack/Lapack.c:963#, c-formatmsgid "'a' (%d x %d) must be square"msgstr "'a' (%d x %d) 必須是正方形的"#: src/modules/lapack/Lapack.c:543 src/modules/lapack/Lapack.c:965#, c-formatmsgid "'b' (%d x %d) must be compatible with 'a' (%d x %d)"msgstr "'b' (%d x %d) 必須與 'a' (%d x %d) 相容"#: src/modules/lapack/Lapack.c:552 src/modules/lapack/Lapack.c:889#: src/modules/lapack/Lapack.c:931 src/modules/lapack/Lapack.c:974#, c-formatmsgid "argument %d of Lapack routine %s had invalid value"msgstr "Lapack 例行程式 %2$s 的引數 %1$d 具有不正確的值"#: src/modules/lapack/Lapack.c:630 src/modules/lapack/Lapack.c:675#: src/modules/lapack/Lapack.c:1046 src/modules/lapack/Lapack.c:1086#, c-formatmsgid "right-hand side should have %d not %d rows"msgstr "公式右側應該有 %d 而不是 %d 列"#: src/modules/lapack/Lapack.c:876 src/modules/lapack/Lapack.c:1119msgid "'a' must be a square matrix"msgstr "'a' 必須是正方形矩陣"#: src/modules/lapack/Lapack.c:877msgid "'a' must have dims > 0"msgstr "'a' 必須有 dims > 0"#: src/modules/lapack/Lapack.c:887#, c-formatmsgid "the leading minor of order %d is not positive definite"msgstr "序列 %d 前置的次要符號並非肯定明確"#: src/modules/lapack/Lapack.c:895 src/modules/lapack/Lapack.c:916#: src/modules/lapack/Lapack.c:952 src/modules/lapack/Lapack.c:995#: src/modules/lapack/Lapack.c:1112msgid "'a' must be a numeric matrix"msgstr "'a' 必須是數值矩陣"#: src/modules/lapack/Lapack.c:903msgid "'size' argument must be a positive integer"msgstr "'size' 引數必須是正整數"#: src/modules/lapack/Lapack.c:918#, c-formatmsgid "'size' cannot exceed ncol(x) = %d"msgstr "'size' 不能超過 ncol(x)=%d"#: src/modules/lapack/Lapack.c:919#, c-formatmsgid "'size' cannot exceed nrow(x) = %d"msgstr "'size' 不能超過 nrow(x)=%d"#: src/modules/lapack/Lapack.c:929#, c-formatmsgid "element (%d, %d) is zero, so the inverse cannot be computed"msgstr "元素 (%d,%d) 為零，因此無法逆向求值"#: src/modules/lapack/Lapack.c:954 src/modules/lapack/Lapack.c:1039#: src/modules/lapack/Lapack.c:1077msgid "'b' must be a numeric matrix"msgstr "'b' 必須是數值矩陣"#: src/modules/lapack/Lapack.c:977msgid "Lapack routine dgesv: system is exactly singular"msgstr "Lapack 例行程式 dgesv: 系統正好是獨特的"#: src/modules/lapack/Lapack.c:982#, c-formatmsgid "system is computationally singular: reciprocal condition number = %g"msgstr "系統計算上是獨特的: 互反條件數=%g"#: src/modules/lapack/Lapack.c:1114msgid "argument 'logarithm' must be logical"msgstr "引數 'logarithm' 必須是邏輯值"#: src/modules/X11/devX11.c:296msgid "cannot set grayscale: reverting to monochrome"msgstr "無法設定灰階: 轉用黑白顏色"#: src/modules/X11/devX11.c:379msgid """X11 driver unable to obtain color cube\n"" reverting to monochrome"msgstr "X11 驅動程式無法開啟顏色方塊，轉用黑白顏色"#: src/modules/X11/devX11.c:424msgid """Error: X11 cannot allocate additional graphics colors.\n""Consider using X11 with colortype=\"pseudo.cube\" or \"gray\"."msgstr """錯誤：X11 無法指派額外的圖案顏色。\n""請考慮用 colortype=\"pseudo.cube\" 或 \"gray\" 選項來呼叫 X11。"#: src/modules/X11/devX11.c:858msgid """could not find any X11 fonts\n""Check that the Font Path is correct."msgstr """找不到任何 X11 字型\n""請檢查字型路徑設得是不是對。"#: src/modules/X11/devX11.c:918#, c-formatmsgid "X11 used font size %d when %d was requested"msgstr "X11 用字型大小 %d 但需要的是 %d"#: src/modules/X11/devX11.c:952#, fuzzy, c-formatmsgid "X11 font %s, face %d at size %d could not be loaded"msgstr "無法載入 X11 字型大小 %d"#: src/modules/X11/devX11.c:961msgid """semi-transparency is not supported on this device: reported only once per ""page"msgstr ""#: src/modules/X11/devX11.c:1071#, c-formatmsgid "X11 protocol error: %s"msgstr "X11 協定錯誤：%s"#: src/modules/X11/devX11.c:1079#, c-formatmsgid "X11 I/O error while opening X11 connection to '%s'"msgstr ""#: src/modules/X11/devX11.c:1097msgid "X11 fatal IO error: please save work and shut down R"msgstr "X11 致命的 IO 錯誤: 請儲存工作資料，然後重新啟動 R"#: src/modules/X11/devX11.c:1155msgid "locale not supported by Xlib: some X ops will operate in C locale"msgstr "Xlib 不支援語言環境: 某些 X 作業指令將在 C 語言環境中啟動"#: src/modules/X11/devX11.c:1156msgid "X cannot set locale modifiers"msgstr "X 無法設定語言環境修飾器"#: src/modules/X11/devX11.c:1160msgid "no png support in this version of R"msgstr "本 R 版本不支援 png"#: src/modules/X11/devX11.c:1166msgid "filename too long in png() call"msgstr "png() 呼叫時檔案名稱太長"#: src/modules/X11/devX11.c:1170#, c-formatmsgid "could not open PNG file '%s'"msgstr "無法開啟 PNG 檔案 '%s'"#: src/modules/X11/devX11.c:1182msgid "no jpeg support in this version of R"msgstr "本 R 版本不支援 jpeg"#: src/modules/X11/devX11.c:1192msgid "filename too long in jpeg() call"msgstr "jpeg() 呼叫時檔案名稱太長"#: src/modules/X11/devX11.c:1196#, c-formatmsgid "could not open JPEG file '%s'"msgstr "無法開啟 JPEG 檔案 '%s'"#: src/modules/X11/devX11.c:1208#, fuzzymsgid "no tiff support in this version of R"msgstr "本 R 版本不支援 png"#: src/modules/X11/devX11.c:1216#, fuzzymsgid "filename too long in tiff() call"msgstr "png() 呼叫時檔案名稱太長"#: src/modules/X11/devX11.c:1228#, fuzzymsgid "filename too long in bmp() call"msgstr "png() 呼叫時檔案名稱太長"#: src/modules/X11/devX11.c:1232#, fuzzy, c-formatmsgid "could not open BMP file '%s'"msgstr "無法開啟 PNG 檔案 '%s'"#: src/modules/X11/devX11.c:1262#, c-formatmsgid "unable to open connection to X11 display '%s'"msgstr "無法開啟連結到 X11 顯示 '%s'"#: src/modules/X11/devX11.c:1273msgid "ignoring 'display' argument as an X11 device is already open"msgstr ""#: src/modules/X11/devX11.c:1284msgid "jpeg() does not support transparency: using white bg"msgstr "jpeg() 不支援透明繪圖: 用白色的背景"#: src/modules/X11/devX11.c:1388#, fuzzy, c-formatmsgid "unable to obtain information on display '%s'"msgstr "無法開啟連結到 X11 顯示 '%s'"#: src/modules/X11/devX11.c:1406msgid "unable to create X11 window"msgstr "無法建立 X11 視窗"#: src/modules/X11/devX11.c:1501#, c-formatmsgid "'width=%d, height=%d' are unlikely values in pixels"msgstr "'寬度=%d, 高度=%d' 是不太可能的像素值"#: src/modules/X11/devX11.c:1506msgid "unable to create pixmap"msgstr "無法建立像素圖"#: src/modules/X11/devX11.c:1577msgid "font family not found in X11 font database"msgstr "X11 字型資料庫中沒有此一字型家族"#: src/modules/X11/devX11.c:1616#, fuzzy, c-formatmsgid "invalid use of %d < 0 in '%s'"msgstr "'n' 的值不正確"#: src/modules/X11/devX11.c:1737 src/modules/X11/devX11.c:3040#, fuzzy, c-formatmsgid "could not open file '%s'"msgstr "無法開啟 PNG 檔案 '%s'"#: src/modules/X11/devX11.c:1976#, fuzzy, c-formatmsgid "%s not available for this device"msgstr "此連結不能被截短"#: src/modules/X11/devX11.c:2058#, fuzzymsgid "Unable to create XImage"msgstr "無法建立像素圖"#: src/modules/X11/devX11.c:2437#, fuzzymsgid "type=\"cairo\" is not supported on this build -- using \"Xlib\""msgstr "本平台不支援 nsl()"#: src/modules/X11/devX11.c:2748msgid "invalid string argument"msgstr "字串引數不正確"#: src/modules/X11/devX11.c:2774#, c-formatmsgid "unable to start device %s"msgstr "無法開啟裝置 %s"#: src/modules/X11/devX11.c:2799msgid "invalid 'width' or 'height'"msgstr "'width' 或 'height' 不正確"#: src/modules/X11/devX11.c:2806msgid "invalid colortype passed to X11 driver"msgstr "傳給 X11 驅動器的顏色類型不正確"#: src/modules/X11/devX11.c:2820msgid "unknown X11 color/colour model -- using monochrome"msgstr "沒有這種 X11 顏色/顏色模型 -- 使用黑白顏色"#: src/modules/X11/devX11.c:2905#, fuzzymsgid "no plot on device to save"msgstr "沒有可以儲存的歷史紀錄"#: src/modules/X11/devX11.c:2907#, fuzzymsgid "not an open X11cairo device"msgstr "太多已經開啟的裝置"#: src/modules/X11/devX11.c:2917#, c-formatmsgid "cannot open file '%s'"msgstr "無法開啟檔案 '%s'"#: src/modules/X11/devX11.c:2934#, fuzzymsgid "savePlot() is not supported on this build"msgstr "本平台不支援 nsl()"#: src/modules/X11/devX11.c:2971 src/modules/X11/devX11.c:3133#, fuzzymsgid "unimplemented cairo-based device"msgstr "尚未實作 predicate"#: src/modules/X11/devX11.c:3343#, fuzzy, c-formatmsgid "unable to start device '%s'"msgstr "無法開啟裝置 %s"#: src/modules/X11/devX11.c:3355#, fuzzymsgid "cairo-based devices are not supported on this build"msgstr "本平台不支援 nsl()"#: src/modules/X11/devX11.c:3394msgid "unable to contact X11 display"msgstr "無法連結到 X11 顯示"#: src/modules/X11/devX11.c:3443#, fuzzy, c-formatmsgid "clipboard cannot be read (error code %d)"msgstr "打不開剪貼簿，或是剪貼簿不含文字"#: src/modules/X11/devX11.c:3477msgid "cannot allocate memory for X11Routines structure"msgstr "無法為 X11Routines 結構指派記憶體"#: src/nmath/bessel_i.c:67msgid "bessel_i allocation error"msgstr "bessel_i 指派錯誤"#: src/nmath/bessel_i.c:75 src/nmath/bessel_i.c:120#, c-formatmsgid "bessel_i(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n"msgstr "bessel_i(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n"#: src/nmath/bessel_i.c:78 src/nmath/bessel_i.c:123#, c-formatmsgid "bessel_i(%g,nu=%g): precision lost in result\n"msgstr "bessel_i(%g,nu=%g): 結果的精確度有損害\n"#: src/nmath/bessel_j.c:65msgid "bessel_j allocation error"msgstr "bessel_j 指派錯誤"#: src/nmath/bessel_j.c:73 src/nmath/bessel_j.c:116#, c-formatmsgid "bessel_j(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n"msgstr "bessel_j(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n"#: src/nmath/bessel_j.c:76 src/nmath/bessel_j.c:119#, c-formatmsgid "bessel_j(%g,nu=%g): precision lost in result\n"msgstr "bessel_j(%g,nu=%g): 結果的精確度有損害\n"#: src/nmath/bessel_k.c:60msgid "bessel_k allocation error"msgstr "bessel_k 指派錯誤"#: src/nmath/bessel_k.c:68 src/nmath/bessel_k.c:105#, c-formatmsgid "bessel_k(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n"msgstr "bessel_k(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n"#: src/nmath/bessel_k.c:71 src/nmath/bessel_k.c:108#, c-formatmsgid "bessel_k(%g,nu=%g): precision lost in result\n"msgstr "bessel_k(%g,nu=%g): 結果的精確度有損害\n"#: src/nmath/bessel_y.c:64msgid "bessel_y allocation error"msgstr "bessel_y 指派錯誤"#: src/nmath/bessel_y.c:74 src/nmath/bessel_y.c:119#, c-formatmsgid "bessel_y(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n"msgstr "bessel_y(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n"#: src/nmath/bessel_y.c:77 src/nmath/bessel_y.c:122#, c-formatmsgid "bessel_y(%g,nu=%g): precision lost in result\n"msgstr "bessel_y(%g,nu=%g): 結果的精確度有損害\n"#: src/nmath/nmath.h:132#, fuzzy, c-formatmsgid "argument out of domain in '%s'\n"msgstr "'perm' 的值在範圍外"#: src/nmath/nmath.h:135#, fuzzy, c-formatmsgid "value out of range in '%s'\n"msgstr "'perm' 的值在範圍外"#: src/nmath/nmath.h:138#, fuzzy, c-formatmsgid "convergence failed in '%s'\n"msgstr "開啟 %s 失敗"#: src/nmath/nmath.h:141#, c-formatmsgid "full precision may not have been achieved in '%s'\n"msgstr ""#: src/nmath/nmath.h:144#, c-formatmsgid "underflow occurred in '%s'\n"msgstr ""#: src/nmath/pnchisq.c:233#, c-formatmsgid "pnchisq(x=%g, ..): not converged in %d iter."msgstr "pnchisq(x=%g, ..): %d 次循環後還沒有聚合。"#: src/nmath/polygamma.c:499#, c-formatmsgid "deriv = %d > %d (= n_max)\n"msgstr "deriv = %d > %d (= n_max)\n"#: src/nmath/rmultinom.c:78#, c-formatmsgid "rbinom: probability sum should be 1, but is %g"msgstr "rbinom: 機率和應該為 1，而不是 %g"#: src/nmath/signrank.c:77msgid "signrank allocation error"msgstr "signrank 指派錯誤"#: src/nmath/snorm.c:326#, c-formatmsgid "norm_rand(): invalid N01_kind: %d\n"msgstr "norm_rand(): N01_kind: %d 不正確\n"#: src/nmath/wilcox.c:85 src/nmath/wilcox.c:95 src/nmath/wilcox.c:148#: src/nmath/wilcox.c:310#, c-formatmsgid "wilcox allocation error %d"msgstr "wilcox 指派錯誤 %d"#: src/unix/dynload.c:143msgid """Explicit local dynamic loading not supported on this platform. Using default."msgstr "本系統不支援明確的本地動態載入。使用預設值。"#: src/unix/dynload.c:144msgid """Explicit global dynamic loading not supported on this platform. Using ""default."msgstr "本系統不支援明確的全局動態載入。使用預設值。"#: src/unix/dynload.c:145msgid """Explicit non-lazy dynamic loading not supported on this platform. Using ""default."msgstr "本系統不支援明確的非緩慢動態載入。使用預設值。"#: src/unix/dynload.c:146msgid """Explicit lazy dynamic loading not supported on this platform. Using default."msgstr "本系統不支援明確的緩慢動態載入。使用預設值。"#: src/unix/dynload.c:240msgid "cannot get working directory!"msgstr "找不到工作目錄"#: src/unix/edit.c:110msgid "invalid argument to edit()"msgstr "edit() 引數不正確"#: src/unix/edit.c:138msgid "argument 'editor' type not valid"msgstr "引數 'editor' 的類型不正確"#: src/unix/edit.c:140msgid "argument 'editor' is not set"msgstr "引數 'editor' 還沒有被設定"#: src/unix/edit.c:145msgid "'title' must be a string"msgstr "'title' 必須是字串"#: src/unix/edit.c:163#, c-formatmsgid "unable to run editor '%s'"msgstr "無法啟動編輯器 '%s'"#: src/unix/edit.c:165msgid "editor ran but returned error status"msgstr "啟動了編輯器但回傳錯誤狀態"#: src/unix/edit.c:175#, c-formatmsgid "problem with running editor %s"msgstr "啟動編輯器 %s 時出了問題"#: src/unix/edit.c:188msgid "unable to open file to read"msgstr "無法開啟檔案來讀取資料"#: src/unix/edit.c:196#, fuzzy, c-formatmsgid """%s occurred on line %d\n"" use a command like\n"" x <- edit()\n"" to recover"msgstr "第 %d 列發生錯誤，請用類似於 x <- edit() 的指令來回到原來狀態"#: src/unix/sys-std.c:128msgid "interrupt handler must not return"msgstr "插斷處置程式不能有回傳值"#: src/unix/sys-std.c:514msgid """An unusual circumstance has arisen in the nesting of readline input. Please ""report using bug.report()"msgstr "巢狀 readline 輸入出了不尋常的錯，請用 bug.report()"#: src/unix/sys-std.c:1066 src/unix/sys-std.c:1233#, fuzzy, c-formatmsgid "problem in saving the history file '%s'"msgstr "啟動編輯器 %s 時出了問題"#: src/unix/sys-std.c:1140#, fuzzy, c-formatmsgid """Cannot open file '%s': %s\n""\n"msgstr """無法開啟檔案 '%s'\n""\n"#: src/unix/sys-std.c:1204 src/unix/sys-std.c:1227msgid "'file' argument is too long"msgstr "'file' 引數太長"#: src/unix/sys-std.c:1210 src/unix/sys-std.c:1212msgid "no history mechanism available"msgstr "沒有歷史功能"#: src/unix/sys-std.c:1239#, fuzzymsgid "problem in truncating the history file"msgstr "啟動編輯器 %s 時出了問題"#: src/unix/sys-std.c:1241 src/unix/sys-std.c:1243msgid "no history available to save"msgstr "沒有可以儲存的歷史紀錄"#: src/unix/sys-std.c:1349msgid "Sys.sleep is not implemented on this system"msgstr "本系統沒有實作 Sys.sleep 此一功能"#: src/unix/sys-unix.c:261msgid "non-empty character argument expected"msgstr "需要非空字元引數"#: src/unix/sys-unix.c:264msgid "'intern' must be logical and not NA"msgstr "'intern' 必須是邏輯值且非無定義"#: src/unix/sys-unix.c:276#, fuzzy, c-formatmsgid "cannot popen '%s', probable reason '%s'"msgstr "無法開啟檔案 '%s'，原因是 '%s'"#: src/unix/sys-unix.c:281#, c-formatmsgid "line %d may be truncated in call to system(, intern = TRUE)"msgstr ""#: src/unix/sys-unix.c:298#, c-formatmsgid "error in running command: %s'"msgstr ""#: src/unix/sys-unix.c:300#, fuzzymsgid "error in running command"msgstr "unz 程式碼中有內部錯誤"#: src/unix/sys-unix.c:304#, c-formatmsgid "running command '%s' had status %d: and error message '%s'"msgstr ""#: src/unix/sys-unix.c:309#, c-formatmsgid "running command '%s' had status %d"msgstr ""#: src/unix/sys-unix.c:390msgid "Sys.info() is not implemented on this system"msgstr "本系統沒有實作 Sys.info() 此一功能"#: src/unix/system.c:250#, c-formatmsgid "WARNING: --gui or -g without value ignored"msgstr "警告: --gui 或 -g 選項沒有值，因此忽略不用"#: src/unix/system.c:272#, c-formatmsgid "WARNING: unknown gui '%s', using X11\n"msgstr "警告: 沒有這種 gui '%s', 使用 X11\n"#: src/unix/system.c:275#, c-formatmsgid "WARNING: unknown gui '%s', using none\n"msgstr "警告: 沒有這種 gui '%s', 因此什麼都不用\n"#: src/unix/system.c:369#, fuzzymsgid "creating temporary file for '-e' failed"msgstr "程式概要分析計時器設置失敗"#: src/unix/system.c:450msgid "WARNING: Only editing the first in the list of files"msgstr "警告: 只修改檔案串列中的第一個元素"#: src/unix/X11.c:52msgid "X11 module is not available under this GUI"msgstr "本 GUI 中沒有 X11 模組"#: src/unix/X11.c:58msgid "X11 routines cannot be accessed in module"msgstr "模組中沒有此一 X11 例行程式"#: src/unix/X11.c:75 src/unix/X11.c:86 src/unix/X11.c:97 src/unix/X11.c:116#: src/unix/X11.c:127 src/unix/X11.c:138 src/unix/X11.c:149msgid "X11 module cannot be loaded"msgstr "無法載入 X11 模組"#: src/unix/X11.c:162 src/unix/X11.c:168 src/unix/X11.c:174 src/unix/X11.c:181#: src/unix/X11.c:188 src/unix/X11.c:194 src/unix/X11.c:200msgid "X11 is not available"msgstr "無法使用 X11"#~ msgid "Insufficient memory (expandcmd)"#~ msgstr "沒有足夠的記憶體 (expandcmd)"#~ msgid "A \" is missing (expandcmd)"#~ msgstr "少了一個 \" (expandcmd)"#~ msgid " not found"#~ msgstr "沒找到"#~ msgid "Impossible to run "#~ msgstr "無法執行 "#~ msgid "Impossible to redirect input"#~ msgstr "無法將輸入重新導向"#~ msgid "Impossible to create pipe"#~ msgstr "無法建立管道"#~ msgid "Impossible to create thread/pipe"#~ msgstr "無法建立執行緒/管道"#~ msgid "pipe connections are not available on this system"#~ msgstr "本系統沒有管道連結這個功能"#~ msgid "'intern=TRUE' is not implemented on this platform"#~ msgstr "本平臺沒有實作 'intern=TRUE' 此一功能"#~ msgid "graphics device does not support graphics events"#~ msgstr "繪圖裝置不支援這些繪圖事件"#~ msgid "'onMouseDown' not supported"#~ msgstr "不支援 'onMouseDown'"#~ msgid "invalid 'onMouseDown' callback"#~ msgstr "'onMouseDown' 回呼發生錯誤"#~ msgid "'onMouseMove' not supported"#~ msgstr "不支援' onMouseMove'"#~ msgid "invalid 'onMouseMove' callback"#~ msgstr "'onMouseMove' 回呼發生錯誤"#~ msgid "'onMouseUp' not supported"#~ msgstr "不支援 'onMouseUp'"#~ msgid "invalid 'onMouseUp' callback"#~ msgstr "'onMouseUp' 回呼不正確"#~ msgid "'onKeybd' not supported"#~ msgstr "不支援 'onKeybd'"#~ msgid "invalid 'onKeybd' callback"#~ msgstr "'onKeybd' 回呼不正確"#~ msgid "directory/folder path name too long"#~ msgstr "目錄/資料夾路徑太長"#~ msgid "list.files: '%s' is not a readable directory"#~ msgstr "list.files: '%s' 目錄不可讀"#~ msgid "%d arguments passed to 'atan' which requires 1"#~ msgstr "傳給了 'atan' %d 個引數，但它只需要一個"#~ msgid "invalid parameter in 'switch()'"#~ msgstr "'switch()' 的參數不正確"#, fuzzy#~ msgid "unrecognized escape removed from \"%s\""#~ msgid_plural "unrecognized escapes removed from \"%s\""#~ msgstr[0] "沒有這種 'save' 值"#, fuzzy#~ msgid "duplicate '%s' argument"#~ msgstr "引數不正確"#~ msgid "corrupt internals!"#~ msgstr "內部毀壞!"#~ msgid "arguments after the first two are ignored"#~ msgstr "除了第一第二引數其它忽略不用"#~ msgid "'...' not allowed in return"#~ msgstr "'...' 不允許存於回傳值中"#~ msgid "empty expression in return value"#~ msgstr "回傳值中的運算式是空的"#, fuzzy#~ msgid "%s not yet implemented for this device"#~ msgstr "本系統沒有實作 gc.time()"#, fuzzy#~ msgid "'xzfile' is not supported in this build of R"#~ msgstr "本平台不支援 nsl()"#~ msgid "internal error in R_compress1"#~ msgstr "內部錯誤 R_compress1"#~ msgid "internal error in R_decompress1"#~ msgstr "內部錯誤 R_decompress1"#, fuzzy#~ msgid "'size' must be a positive integer"#~ msgstr "'size' 引數必須是正整數"#~ msgid "perl = TRUE is only fully implemented in UTF-8 locales"#~ msgstr "perl = TRUE 只適用於 UTF-8 語言環境"#, fuzzy#~ msgid ""#~ "ignore.case = TRUE, perl = TRUE, useBytes = TRUE\n"#~ " in UTF-8 locales only works caselessly for ASCII patterns"#~ msgstr "在 UTF-8 語言環境下 agrep() 只能適用於 ASCII 字串"#~ msgid "invalid backreference %d in regular expression"#~ msgstr "正規表示式中向後參考 %d 不正確"#~ msgid "could not allocate memory for approximate matching"#~ msgstr "做近似比較時無法指派足夠記憶體"#~ msgid "could not perform case insensitive matching"#~ msgstr "無法進行不區分大小寫的比較"#~ msgid "argument must be a character vector of length 1"#~ msgstr "引數必須是長度為 1 的字元向量"#~ msgid ""#~ "argument should be a character vector of length 1\n"#~ "all but the first element will be ignored"#~ msgstr "引數應當是長度為 1 的字元向量，除第一個字元外其它所有的字元都將忽略"#~ msgid "argument 'x' must be a raw vector"#~ msgstr "引數 'x' 必須是常數向量"#~ msgid "argument 'multiple' must be TRUE or FALSE"#~ msgstr "引數 'multiple' 的值必須是 TRUE 或 FALSE"#~ msgid "argument 'shift' must be a small integer"#~ msgstr "引數 'shift' 必須是小數值的整數"#~ msgid "argument 'x' must be an integer vector"#~ msgstr "引數 'x' 必須是整數向量"#~ msgid "argument 'x' must be raw, integer or logical"#~ msgstr "引數 'x' 必須是純量值、整數值或邏輯值"#~ msgid "argument 'type' must be a character string"#~ msgstr "引數「type」必須是字串"#~ msgid "argument 'x' must be a multiple of %d long"#~ msgstr "引數 'x' 必須是 %d 值的整數倍"#~ msgid "argument 'x' must not contain NAs"#~ msgstr "引數 'x' 不能含 NA 值"#~ msgid "R_decompress1 requires a raw vector"#~ msgstr "R_decompress1 需要純量向量"#, fuzzy#~ msgid "invalid \\uxxxx sequence (line %d)"#~ msgstr "\\uxxxx 序列不正確"#, fuzzy#~ msgid "invalid \\Uxxxxxxxx sequence (line %d)"#~ msgstr "\\U{xxxxxxxx} 序列不正確"#~ msgid "WARNING: UTF-8 locales are not supported in this build of R\n"#~ msgstr "警告: 此 R 編譯版本不支援 UTF-8 語言環境\n"#, fuzzy#~ msgid "WARNING: multibyte locales are not supported in this build of R\n"#~ msgstr "警告: 此 R 編譯版本不支援 UTF-8 語言環境\n"#, fuzzy#~ msgid "duplicate condition argument"#~ msgstr "第二個引數不正確"#, fuzzy#~ msgid "duplicate expr argument"#~ msgstr "不能有非字元名稱"#~ msgid "Success"#~ msgstr "執行成功"#~ msgid "No match"#~ msgstr "沒有符合的"#~ msgid "Invalid regular expression"#~ msgstr "正規表示式不正確"#~ msgid "Invalid collation character"#~ msgstr "排序字元不正確"#~ msgid "Invalid character class name"#~ msgstr "字元類別名稱不正確"#~ msgid "Trailing backslash"#~ msgstr "末端有反斜線"#~ msgid "Invalid back reference"#~ msgstr "向後參考不正確"#~ msgid "Unmatched [ or [^"#~ msgstr "沒有符合的 [ 或 [^"#~ msgid "Unmatched ( or \\("#~ msgstr "沒有符合的 ( 或 \\("#~ msgid "Unmatched \\{"#~ msgstr "沒有符合的 \\{"#~ msgid "Invalid content of \\{\\}"#~ msgstr "\\{\\} 內容不正確"#~ msgid "Invalid range end"#~ msgstr "範圍下限不正確"#~ msgid "Memory exhausted"#~ msgstr "記憶體用盡"#~ msgid "Invalid preceding regular expression"#~ msgstr "前一個正規表示式不正確"#~ msgid "Premature end of regular expression"#~ msgstr "正規表示式沒有結尾"#~ msgid "Regular expression too big"#~ msgstr "正規表示式太大"#~ msgid "Unmatched ) or \\)"#~ msgstr "沒有符合的 ) 或 \\)"#~ msgid "No previous regular expression"#~ msgstr "前一個正規表示式不存在"#, fuzzy#~ msgid "invalid input in wtransChar"#~ msgstr "readChar() 的 UTF-8 輸入不正確"#~ msgid "second argument must be a list"#~ msgstr "第二個引數必須是串列"#~ msgid "invalid (NA) arguments."#~ msgstr "(NA) 引數不正確。"#~ msgid "re-encoding is not supported on this system"#~ msgstr "本系統不支援編碼轉換"#~ msgid "'iconv' is not available on this system"#~ msgstr "'iconv' 本系統沒有這個功能"#~ msgid "re-encoding is not available on this system"#~ msgstr "本系統沒有重新編碼這個功能"#~ msgid "unrecognised format at end of string"#~ msgstr "沒有這種在字串尾的格式"#~ msgid "zero-length argument"#~ msgstr "零長度引數"#~ msgid "first argument is not a matrix"#~ msgstr "第一個引數不是矩陣"#~ msgid "coordinates outsize specified range"#~ msgstr "座標比設定的範圍要大"#, fuzzy#~ msgid "%s%s on line %d"#~ msgstr "第 %d 列有語法錯誤"#, fuzzy#~ msgid "invalid input '%s' in mbcsToLatin1: omitted"#~ msgstr "mbcsToLatin1 輸入不正確"#, fuzzy#~ msgid "allocation failure in '%s'"#~ msgstr "指派 GVText 失敗"#~ msgid "Object \"%s\" not found"#~ msgstr "找不到這個目的物件 \"%s\""#~ msgid "variable \"%s\" was not found"#~ msgstr "找不到 \"%s\" 這個變數"#~ msgid "object \"%s\" not found"#~ msgstr "找不到目的物件 \"%s\""#~ msgid "argument 'x' must be a integer vector"#~ msgstr "引數 'x' 必須是整數向量"#~ msgid "symbol print-name too long"#~ msgstr "符號 print-name 太長"#~ msgid "argument is not an atomic vector"#~ msgstr "引數不是基元向量"#~ msgid "nothing to replace with"#~ msgstr "沒有可以替換的東西："#~ msgid "conversion from encoding '%s' is unsupported"#~ msgstr "不支援編碼 '%s' 的轉換"#~ msgid "conversion to encoding '%s' is unsupported"#~ msgstr "不支援轉成編碼 '%s'"#~ msgid "cannot create fifo '%s'"#~ msgstr "無法建立先進先出 '%s'"#~ msgid "cannot open pipe() cmd '%s'"#~ msgstr "無法開啟 pipe() 命令 '%s'"#~ msgid "cannot open compressed file '%s'"#~ msgstr "無法開啟壓縮檔案 '%s'"#~ msgid "cannot open bzip2-ed file '%s'"#~ msgstr "無法開啟 bzip2 檔案 '%s'"#, fuzzy#~ msgid "cannot create file '%s'"#~ msgstr "無法建立先進先出 '%s'"#, fuzzy#~ msgid "cannot symlink '%s' to '%s'"#~ msgstr "無法開啟檔案 '%s'，原因是 '%s'"#, fuzzy#~ msgid "cannot rename file '%s' to '%s'"#~ msgstr "無法開啟檔案 '%s'，原因是 '%s'"#, fuzzy#~ msgid "cannot create dir '%s'"#~ msgstr "無法建立先進先出 '%s'"#, fuzzy#~ msgid "cannot save data -- unable to open '%s'"#~ msgstr "無法儲存資料 -- 無法開啟 %s"#~ msgid "cannot open destfile '%s'"#~ msgstr "無法開啟 destfile '%s'"#~ msgid ""#~ "Cannot open file '%s'\n"#~ "\n"#~ msgstr ""#~ "無法開啟檔案 '%s'\n"#~ "\n"#~ msgid "nchar() requires a character vector"#~ msgstr "nchar() 需要字元向量"#~ msgid "polynomial degree too high (49 max)"#~ msgstr "多項式次數太高 (最多只能 49)"#, fuzzy#~ msgid "cannot obtain size for the null device"#~ msgstr "沒有在使用中的或預設的裝置"#~ msgid "EOF whilst reading MBCS char"#~ msgstr "讀取 MBCS 位元組時遇到 EOF"#, fuzzy#~ msgid "unable to allocate space for source line %d"#~ msgstr "無法指派記憶體 (於 GEregister)"#, fuzzy#~ msgid "unsupported conversion in 'filenameToWchar'"#~ msgstr "不支援這種轉換"#, fuzzy#~ msgid "Unable to open file '%s': %s"#~ msgstr "無法開啟檔案 '%s'"#~ msgid "unable to open connection"#~ msgstr "無法開啟連結"#~ msgid "cannot open pipe() cmd '%s', reason '%s'"#~ msgstr "無法開啟 pipe() 命令 '%s'，原因是 '%s'"#~ msgid "file open failed"#~ msgstr "開啟檔案失敗"#~ msgid ""#~ "Cannot open file '%s', reason '%s'\n"#~ "\n"#~ msgstr ""#~ "無法開啟檔案 '%s'，原因是 '%s'\n"#~ "\n"#, fuzzy#~ msgid "unable to start device jpeg"#~ msgstr "無法開啟裝置 %s"#, fuzzy#~ msgid "invalid '%s' value), "#~ msgstr "'%s' 值不正確"#~ msgid "invalid 'only.values'"#~ msgstr "'only.values' 值不正確"#, fuzzy#~ msgid "invalid argument 'mode'"#~ msgstr "引數不正確"#, fuzzy#~ msgid "invalid 'byrow' value"#~ msgstr "矩陣: 'byrow' 值不正確"#~ msgid "invalid permutation ('perm')"#~ msgstr "排列不正確 ('perm')"#~ msgid "invalid value of 'n'"#~ msgstr "'n' 的值不正確"#~ msgid "invalid value of 'p'"#~ msgstr "'p' 的值不正確"#~ msgid "invalid value of 'na.rm'"#~ msgstr "'na.rm' 的值不正確"#~ msgid "invalid value of 'allow_'"#~ msgstr "'allow_' 值不正確"#~ msgid "invalid HSV color"#~ msgstr "HSV 顏色不正確"#, fuzzy#~ msgid "invalid value of '%s'"#~ msgstr "'n' 的值不正確"#~ msgid "invalid value for 'which'"#~ msgstr "'which' 的值不正確"#~ msgid "invalid value for 'n'"#~ msgstr "'n' 的值不正確"#~ msgid "invalid 'n'"#~ msgstr "'n' 值不正確"#~ msgid "invalid 'headers'"#~ msgstr "'headers' 不正確"#~ msgid "invalid 'title'"#~ msgstr "'title' 不正確"#~ msgid "invalid value of 'what' argument"#~ msgstr "'what' 引數的值不正確"#~ msgid "invalid 'what' specified"#~ msgstr "'what' 設定不正確"#, fuzzy#~ msgid "invalid value of 'title' in devWindows"#~ msgstr "'signed' 的值不正確"#~ msgid "Invalid color"#~ msgstr "顏色不正確"#~ msgid "cannot take snapshot of old-style device"#~ msgstr "無法擷取舊式裝置快照"#~ msgid "cannot play snapshot on old-style device"#~ msgstr "無法在舊式裝置上播放快照"#~ msgid "invalid graphics parameter list"#~ msgstr "繪圖參數串列不正確"#, fuzzy#~ msgid "cannot coerce type '%s' to vector of type '%s'"#~ msgstr "不能把類型 %s 強制變更成 %s 向量"#, fuzzy#~ msgid "cannot type '%s' coerce to vector"#~ msgstr "無法強制變更成向量"#~ msgid "invalid multibyte string"#~ msgstr "多位元組字串不正確"#~ msgid "invalid input in 'mbcsToLatin1'"#~ msgstr "'mbcsToLatin1' 輸入不正確"#~ msgid "<ERROR: invalid input in encoding> "#~ msgstr "<錯誤: 編碼中的輸入不正確> "#~ msgid "'loadRconsole' can only be used in Rgui"#~ msgstr "'loadRconsole' 只能在 Rgui 中使用"#~ msgid "use of agrep() in a UTF-8 locale may only work for ASCII strings"#~ msgstr "在 UTF-8 語言環境下 agrep() 只能適用於 ASCII 字串"#~ msgid "allocation failure in 'mbcsToLatin1'"#~ msgstr "指派 'mbcsToLatin1' 失敗"#~ msgid "allocation failure in GVStrWidth"#~ msgstr "指派 GVStrWidth 失敗"#~ msgid "allocation failure in GVStrHeight"#~ msgstr "指派 GVStrHeight 失敗"#~ msgid "\\Uxxxxxxxx sequences are not supported on Windows"#~ msgstr "\\Uxxxxxxxx 序列於 Windows 上並不支援"#~ msgid "\\Uxxxxxxxx sequences are only valid in multibyte locales"#~ msgstr "\\Uxxxxxxxx 序列只於多位元組語區中才有效"#~ msgid "failed to find symbols in iconv.dll"#~ msgstr "iconv.dll 中找不到符號"#~ msgid "iconv.dll is not available on this system"#~ msgstr "iconv.dll 本系統沒有這個功能"#~ msgid "approx(): invalid f value"#~ msgstr "approx(): f 值無效"#~ msgid "approx(): invalid interpolation method"#~ msgstr "approx(): 插值方法無效"#~ msgid "approx(): attempted to interpolate NA values"#~ msgstr "approx(): 試圖插入 NA 值"#~ msgid "recursive default argument reference"#~ msgstr "預設引數參考出現遞迴"#~ msgid "String length exceeds buffer size of %d"#~ msgstr "字串長度超過了緩衝區的大小 %d"#~ msgid "could not allocate memory in C function 'R_AllocStringBuffer'"#~ msgstr "無法為 read.dcf 指派記憶體"#, fuzzy#~ msgid "cannot allocate memory block of size %0.1f Mb"#~ msgstr "無法分派大小為 %.0f 的記憶體區塊"#, fuzzy#~ msgid "cannot allocate memory block of size %0.1f Kb"#~ msgstr "無法分派大小為 %.0f 的記憶體區塊"#~ msgid "cannot allocate memory block of size %.0f"#~ msgstr "無法分派大小為 %.0f 的記憶體區塊"#~ msgid "out of memory"#~ msgstr "記憶體用盡"#~ msgid "incorrect number of arguments to 'row/col'"#~ msgstr "'row/col' 的引數數目不正確"#~ msgid "remove: variable \"%s\" was not found"#~ msgstr "remove: 找不到 \"%s\" 這個變數"#, fuzzy#~ msgid "invalid number of copies in rep.int()"#~ msgstr "rep() 中的拷貝數目不正確"#, fuzzy#~ msgid "invalid 'names' in 'R_unlink'"#~ msgstr "R_unlink 的 'names' 無效"#~ msgid ""#~ "longer object length\n"#~ "\tis not a multiple of shorter object length"#~ msgstr "長的目的物件長度不是短的目的物件長度的整數倍"#~ msgid "dim<- : invalid first argument"#~ msgstr "dim<-: 第一引數無效"#~ msgid "dim<- : invalid second argument"#~ msgstr "dim<-: 第二引數無效"#~ msgid "invalid slot type"#~ msgstr "插槽的類型不正確"#~ msgid "length<- invalid first argument"#~ msgstr "length<- 第一個引數不正確"#~ msgid "length<- invalid second argument"#~ msgstr "length<- 第二個引數不正確"#~ msgid "invalid substring argument(s) in substr()"#~ msgstr "substr() 中的子字串引數不正確"#~ msgid "invalid substring argument(s) in substr<-()"#~ msgstr " substr<-() 子字串引數不正確"#~ msgid "invalid right-hand side in substr<-()"#~ msgstr "substr<-() 函數右側表述不正確"#~ msgid "non-character argument in strsplit()"#~ msgstr "strsplit() 不能用於非字元引數"#~ msgid "non-character argument to tolower()"#~ msgstr "非字元引數不能用於 tolower()"#~ msgid "open/close not enabled for this connection"#~ msgstr "開啟/關閉不適用於此連結"#~ msgid "getc not enabled for this connection"#~ msgstr "getc 不適用於此連結"#~ msgid "read not enabled for this connection"#~ msgstr "不能讀取這個連結"#~ msgid "'%s' is deprecated"#~ msgstr "建議不要使用 '%s'"#, fuzzy#~ msgid "'\\%%%%' is an unrecognized escape in a character string"#~ msgstr "第一個引數必須是字串"#~ msgid "file.info() is not implemented on this system"#~ msgstr "本系統還沒有實作 file.info()"#~ msgid "'recursive = TRUE' is not supported on this platform"#~ msgstr "本平台不支援 'recursive=TRUE'"#~ msgid "invalid subscript"#~ msgstr "下標不正確"#~ msgid "file existence is not available on this system"#~ msgstr "本系統沒有檢查檔案是否存在此一功能"#~ msgid "file modification time is not available on this system"#~ msgstr "本系統沒有檢查檔案修改時間此一功能"#, fuzzy#~ msgid "'Sys.putenv' is not available on this system"#~ msgstr "'putenv' 本系統沒有這個功能"#, fuzzy#~ msgid "invalid 'f' argument"#~ msgstr "'%s' 引數不正確"#, fuzzy#~ msgid "invalid 'classes' argument"#~ msgstr "'%s' 引數不正確"#~ msgid "'%s' is not a function"#~ msgstr "'%s' 不是函數"#~ msgid "'%s' is not a logical"#~ msgstr "'%s' 不是邏輯值"#~ msgid "unknown URL scheme"#~ msgstr "沒有這種 URL 格式"#~ msgid "incorrect number of args to 'length'"#~ msgstr "'length' 的引數數目不正確"#~ msgid "ReadItem: unknown type %i"#~ msgstr "ReadItem：不明的類型 %i"#~ msgid "WARNING: no 'vsize' given\n"#~ msgstr "警告: 沒有設定 'vsize' 的值\n"#~ msgid "WARNING: '--vsize' value is invalid: ignored\n"#~ msgstr "警告: '--vsize' 的值不正確: 忽略不用\n"#~ msgid "WARNING: --vsize=%ld'%c': too large and ignored\n"#~ msgstr "警告: --vsize=%ld'%c': 太大，忽略不用\n"#~ msgid "WARNING: no 'nsize' given\n"#~ msgstr "警告: 沒有設定 'nsize' 的值\n"#~ msgid "WARNING: '--nsize' value is invalid: ignored\n"#~ msgstr "警告: '--nsize' 的值不正確: 忽略不用\n"#~ msgid "WARNING: --nsize=%lu'%c': too large and ignored\n"#~ msgstr "警告: --nsize=%lu'%c': 太大，忽略不用\n"#~ msgid "syntax error"#~ msgstr "語法錯誤"#~ msgid "syntax error in \"%s\""#~ msgstr "語法錯誤發生於 \"%s\""#~ msgid "using .GlobalEnv instead of '%s'"#~ msgstr "用 .GlobalEnv 而不用 '%s'"#~ msgid "namespaces not available; using .GlobalEnv"#~ msgstr "名稱空間不可用；使用 .GlobalEnv"#~ msgid "too many devices open"#~ msgstr "太多已經開啟的裝置"#~ msgid "supplied length is invalid"#~ msgstr "長度不正確"#~ msgid "the first argument must be a string"#~ msgstr "第一引數必須是字串"#~ msgid "unprotect(): stack imbalance"#~ msgstr "unprotect(): 堆疊不平衡"#~ msgid "first argument ('table') not of type VECSXP, from R_HashResize"#~ msgstr "R_HashResize 第一個引數 ('table') 非 VECSXP 類型"#~ msgid "first argument ('table') not of type VECSXP, R_HashSizeCheck"#~ msgstr "R_HashSizeCheck 第一個引數 ('table') 非 VECSXP 類型"#~ msgid "first argument ('table') not of type ENVSXP, from R_HashVector2Hash"#~ msgstr "R_HashVector2Hash 第一個引數 ('table') 非 ENVSXP 類型"#~ msgid "cannot get binding from base environment"#~ msgstr "無法從基本環境中取得繫結"#~ msgid "cannot get binding from base namespace"#~ msgstr "無法從基本名稱空間取得繫結"#~ msgid "locking the base environment is not supported yet"#~ msgstr "目前還不支援對基本環境進行鎖定"#~ msgid "invalid variable type for '%s'"#~ msgstr "'%s' 的變數類型不正確"#~ msgid "invalid variable type"#~ msgstr "變數類型不正確"#~ msgid "invalid value of 'which'"#~ msgstr "'which' 的值無效"#~ msgid "invalid first argument to remove()"#~ msgstr "remove() 的第一個引數不正確"#~ msgid "wrong length for 'ifnotfound' argument"#~ msgstr "'ifnotfound' 引數的長度不正確"#~ msgid "attach: invalid object name"#~ msgstr "attach: 目的物件名稱不正確"#~ msgid "invalid value for 'ok'"#~ msgstr "'ok' 的值不正確"#~ msgid "invalid value of 'what'"#~ msgstr "'what' 的值不正確"#~ msgid "invalid value of 'swap'"#~ msgstr "'swap' 的值不正確"#~ msgid "invalid value of 'sep'"#~ msgstr "'sep' 的值不正確"#~ msgid "invalid value for 'closeOnExit'"#~ msgstr "'closeOnExit' 的值不正確"#~ msgid "invalid value for 'type'"#~ msgstr "'type' 的值不正確"#~ msgid "invalid value for 'split'"#~ msgstr "'split' 的值不正確"#~ msgid "\\uxxxx sequences are only valid in multibyte locales"#~ msgstr "\\uxxxx 序列只有在多位元組語區中才有效"#~ msgid ""#~ "graphical parameter \"%s\" can not be set in high-level plot() function"#~ msgstr "高階 plot() 函數中不能設定繪圖參數 \"%s\""