# Chinese translations for R package # Copyright (C) 2005 The R Foundation # This file is distributed under the same license as the PACKAGE package. # 陈斐 , 2006. # msgid "" msgstr "" "Project-Id-Version: R 2.1.0\n" "Report-Msgid-Bugs-To: bugs.r-project.org\n" "POT-Creation-Date: 2021-11-06 17:17+0100\n" "PO-Revision-Date: 2005-05-20 18:26+0800\n" "Last-Translator: ronggui\n" "Language-Team: Chinese\n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: src/appl/optim.c:60 msgid "non-finite value supplied by 'optim'" msgstr "'optim'回覆了无限值" #: src/appl/optim.c:67 #, c-format msgid "candidate point in 'optim' evaluated to length %d not %d" msgstr "'optim'候选点长度被评估为%d，而不是%d" #: src/appl/optim.c:136 msgid "REPORT must be > 0 (method = \"BFGS\")" msgstr "REPORT必需大于零 (method = \"BFGS\")" #: src/appl/optim.c:147 msgid "initial value in 'vmmin' is not finite" msgstr "'vmmin'的初始值不能为无穷大" #: src/appl/optim.c:297 msgid "function cannot be evaluated at initial parameters" msgstr "无法用初始参数来评估函数" #: src/appl/optim.c:497 msgid "unknown 'type' in \"CG\" method of 'optim'" msgstr "'optim'的\"CG\"方法中没有这种'type'" #: src/appl/optim.c:510 msgid "Function cannot be evaluated at initial parameters" msgstr "无法用初始参数来评估函数" #: src/appl/optim.c:565 msgid "unknown type in \"CG\" method of 'optim'" msgstr "'optim'的\"CG\"方法中没有这一种类" #: src/appl/optim.c:662 msgid "REPORT must be > 0 (method = \"L-BFGS-B\")" msgstr "REPORT必需大于零 (method = \"L-BFGS-B\")" #: src/appl/optim.c:685 msgid "L-BFGS-B needs finite values of 'fn'" msgstr "L-BFGS-B不能有'fn'的无限值" #: src/appl/optim.c:741 msgid "trace, REPORT must be >= 0 (method = \"SANN\")" msgstr "迹,REPORT必需大于零 (method = \"SANN\")" #: src/appl/pretty.c:127 #, c-format msgid "R_pretty(): infinite range; *ndiv=%d, should have ndiv >= 2" msgstr "" #: src/appl/pretty.c:142 #, fuzzy, c-format msgid "R_pretty(): very small range 'cell'=%g, corrected to %g" msgstr "Internal(pretty()): 范围太小，纠正了" #: src/appl/pretty.c:146 #, fuzzy, c-format msgid "R_pretty(): very large range 'cell'=%g, corrected to %g" msgstr "Internal(pretty()): 范围太大，纠正了" #: src/gnuwin32/dynload.c:144 #, c-format msgid "DLL attempted to change FPU control word from %x to %x" msgstr "DLL试图把FPU控制词从%x改成%x" #: src/gnuwin32/dynload.c:185 msgid "cannot get working directory" msgstr "找不到工作目录" #: src/gnuwin32/extra.c:63 src/gnuwin32/extra.c:92 src/gnuwin32/extra.c:131 msgid "R_HOME not set" msgstr "没有设定R_HOME" #: src/gnuwin32/extra.c:71 #, c-format msgid "'%s' not found" msgstr "找不到'%s'" #: src/gnuwin32/extra.c:73 #, c-format msgid "file association for '%s' not available or invalid" msgstr "无法同'%s'进行文件关联" #: src/gnuwin32/extra.c:76 #, c-format msgid "access to '%s' denied" msgstr "不能存取'%s'" #: src/gnuwin32/extra.c:77 #, c-format msgid "problem in displaying '%s'" msgstr "在显示'%s'时出了问题" #: src/gnuwin32/extra.c:102 #, c-format msgid "'%ls' not found" msgstr "找不到'%ls'" #: src/gnuwin32/extra.c:104 #, c-format msgid "file association for '%ls' not available or invalid" msgstr "无法同'%ls'文件关联" #: src/gnuwin32/extra.c:107 #, c-format msgid "access to '%ls' denied" msgstr "不能存取'%ls'" #: src/gnuwin32/extra.c:108 #, c-format msgid "problem in displaying '%ls'" msgstr "在显示'%ls'时出了问题" #: src/gnuwin32/extra.c:119 src/gnuwin32/extra.c:161 src/gnuwin32/extra.c:297 #: src/gnuwin32/extra.c:871 src/gnuwin32/extra.c:896 #: src/gnuwin32/sys-win32.c:249 src/main/Rdynload.c:1298 src/main/agrep.c:131 #: src/main/agrep.c:135 src/main/agrep.c:776 src/main/agrep.c:781 #: src/main/apply.c:332 src/main/apply.c:334 src/main/apply.c:337 #: src/main/array.c:94 src/main/array.c:1750 src/main/array.c:1889 #: src/main/array.c:1891 src/main/array.c:1892 src/main/array.c:2273 #: src/main/array.c:2275 src/main/array.c:2277 src/main/attrib.c:202 #: src/main/builtin.c:88 src/main/builtin.c:97 src/main/builtin.c:116 #: src/main/builtin.c:118 src/main/builtin.c:154 src/main/builtin.c:160 #: src/main/builtin.c:582 src/main/builtin.c:598 src/main/builtin.c:786 #: src/main/builtin.c:788 src/main/builtin.c:790 src/main/character.c:321 #: src/main/character.c:324 src/main/character.c:329 src/main/character.c:930 #: src/main/character.c:933 src/main/character.c:1455 src/main/character.c:1459 #: src/main/character.c:1709 src/main/character.c:1713 #: src/main/character.c:1780 src/main/character.c:1783 #: src/main/connections.c:1437 src/main/connections.c:1443 #: src/main/connections.c:1446 src/main/connections.c:1450 #: src/main/connections.c:1602 src/main/connections.c:1618 #: src/main/connections.c:1623 src/main/connections.c:2259 #: src/main/connections.c:2265 src/main/connections.c:2269 #: src/main/connections.c:2273 src/main/connections.c:2278 #: src/main/connections.c:2938 src/main/connections.c:2943 #: src/main/connections.c:2946 src/main/connections.c:2949 #: src/main/connections.c:3355 src/main/connections.c:3360 #: src/main/connections.c:3366 src/main/connections.c:3369 #: src/main/connections.c:3373 src/main/connections.c:3388 #: src/main/connections.c:3438 src/main/connections.c:3443 #: src/main/connections.c:3447 src/main/connections.c:3459 #: src/main/connections.c:3463 src/main/connections.c:3469 #: src/main/connections.c:3529 src/main/connections.c:3535 #: src/main/connections.c:3539 src/main/connections.c:3591 #: src/main/connections.c:3594 src/main/connections.c:3920 #: src/main/connections.c:3923 src/main/connections.c:3926 #: src/main/connections.c:3932 src/main/connections.c:4045 #: src/main/connections.c:4051 src/main/connections.c:4054 #: src/main/connections.c:4209 src/main/connections.c:4212 #: src/main/connections.c:4216 src/main/connections.c:4219 #: src/main/connections.c:4335 src/main/connections.c:4459 #: src/main/connections.c:4462 src/main/connections.c:4801 #: src/main/connections.c:4832 src/main/connections.c:4867 #: src/main/connections.c:4882 src/main/connections.c:4890 #: src/main/connections.c:4916 src/main/connections.c:5069 #: src/main/connections.c:5073 src/main/connections.c:5203 #: src/main/connections.c:5205 src/main/connections.c:5207 #: src/main/connections.c:5235 src/main/connections.c:5376 #: src/main/connections.c:5425 src/main/connections.c:5430 #: src/main/connections.c:5435 src/main/connections.c:5459 #: src/main/connections.c:6227 src/main/connections.c:6254 #: src/main/connections.c:6261 src/main/context.c:645 src/main/context.c:654 #: src/main/context.c:658 src/main/datetime.c:780 src/main/datetime.c:869 #: src/main/datetime.c:872 src/main/datetime.c:876 src/main/datetime.c:1057 #: src/main/datetime.c:1059 src/main/datetime.c:1264 src/main/debug.c:246 #: src/main/deparse.c:437 src/main/dotcode.c:496 src/main/dotcode.c:500 #: src/main/dotcode.c:505 src/main/dounzip.c:334 src/main/dounzip.c:341 #: src/main/dounzip.c:351 src/main/dounzip.c:356 src/main/dounzip.c:360 #: src/main/dounzip.c:364 src/main/envir.c:1868 src/main/envir.c:1871 #: src/main/envir.c:1985 src/main/envir.c:1990 src/main/envir.c:2081 #: src/main/envir.c:2097 src/main/envir.c:2103 src/main/envir.c:2214 #: src/main/envir.c:2222 src/main/envir.c:2229 src/main/envir.c:2240 #: src/main/envir.c:2480 src/main/envir.c:2601 src/main/envir.c:2898 #: src/main/envir.c:3162 src/main/envir.c:3176 src/main/envir.c:3183 #: src/main/envir.c:3199 src/main/envir.c:3969 src/main/errors.c:1257 #: src/main/eval.c:501 src/main/eval.c:511 src/main/eval.c:514 #: src/main/grep.c:1189 src/main/grep.c:1194 src/main/grep.c:1483 #: src/main/grep.c:1485 src/main/grep.c:1487 src/main/grep.c:1964 #: src/main/grep.c:1968 src/main/grep.c:1973 src/main/grep.c:2839 #: src/main/grep.c:2844 src/main/grep.c:3159 src/main/grep.c:3164 #: src/main/memory.c:4590 src/main/paste.c:124 src/main/paste.c:465 #: src/main/paste.c:479 src/main/paste.c:484 src/main/paste.c:489 #: src/main/paste.c:494 src/main/paste.c:497 src/main/paste.c:505 #: src/main/paste.c:510 src/main/paste.c:692 src/main/paste.c:697 #: src/main/platform.c:478 src/main/platform.c:480 src/main/platform.c:482 #: src/main/platform.c:494 src/main/platform.c:505 src/main/platform.c:558 #: src/main/platform.c:560 src/main/platform.c:857 src/main/platform.c:859 #: src/main/platform.c:954 src/main/platform.c:1332 src/main/platform.c:1338 #: src/main/platform.c:1341 src/main/platform.c:1344 src/main/platform.c:1347 #: src/main/platform.c:1350 src/main/platform.c:1353 src/main/platform.c:1356 #: src/main/platform.c:1456 src/main/platform.c:1459 src/main/platform.c:1462 #: src/main/platform.c:1504 src/main/platform.c:1564 src/main/platform.c:1567 #: src/main/platform.c:1786 src/main/platform.c:1789 src/main/platform.c:1792 #: src/main/platform.c:1795 src/main/platform.c:1840 src/main/platform.c:1843 #: src/main/platform.c:1846 src/main/platform.c:1849 src/main/platform.c:1894 #: src/main/platform.c:1927 src/main/platform.c:1929 src/main/platform.c:2008 #: src/main/platform.c:2093 src/main/platform.c:2358 src/main/platform.c:2418 #: src/main/platform.c:2619 src/main/platform.c:2622 src/main/platform.c:2625 #: src/main/platform.c:2628 src/main/platform.c:2631 src/main/platform.c:2634 #: src/main/platform.c:2873 src/main/platform.c:2876 src/main/platform.c:2879 #: src/main/platform.c:2882 src/main/platform.c:2885 src/main/platform.c:2888 #: src/main/platform.c:2891 src/main/platform.c:2978 src/main/platform.c:2986 #: src/main/platform.c:3022 src/main/platform.c:3066 src/main/platform.c:3157 #: src/main/print.c:246 src/main/print.c:275 src/main/print.c:283 #: src/main/print.c:297 src/main/random.c:470 src/main/random.c:474 #: src/main/random.c:481 src/main/random.c:509 src/main/saveload.c:2012 #: src/main/saveload.c:2054 src/main/saveload.c:2057 src/main/saveload.c:2060 #: src/main/saveload.c:2176 src/main/saveload.c:2356 src/main/saveload.c:2361 #: src/main/saveload.c:2364 src/main/saveload.c:2473 src/main/scan.c:694 #: src/main/scan.c:867 src/main/scan.c:881 src/main/scan.c:885 #: src/main/scan.c:887 src/main/scan.c:898 src/main/scan.c:925 #: src/main/scan.c:928 src/main/scan.c:931 src/main/scan.c:986 #: src/main/seq.c:671 src/main/seq.c:678 src/main/seq.c:688 src/main/seq.c:694 #: src/main/seq.c:739 src/main/seq.c:744 src/main/seq.c:747 src/main/seq.c:751 #: src/main/seq.c:756 src/main/seq.c:763 src/main/seq.c:767 src/main/seq.c:773 #: src/main/sort.c:276 src/main/sysutils.c:611 src/main/sysutils.c:615 #: src/main/sysutils.c:619 src/main/sysutils.c:625 src/main/sysutils.c:629 #: src/main/sysutils.c:2041 src/main/sysutils.c:2045 src/main/unique.c:1449 #: src/main/unique.c:1755 src/main/unique.c:1759 src/main/unique.c:1769 #: src/main/unique.c:2161 src/main/util.c:662 src/main/util.c:665 #: src/main/util.c:1612 src/main/util.c:1626 src/main/util.c:2370 #: src/main/util.c:2610 src/main/util.c:2611 src/main/util.c:2612 #: src/main/util.c:2628 src/main/util.c:2670 src/main/util.c:2674 #: src/main/util.c:2676 src/main/util.c:2704 src/main/util.c:2706 #: src/main/util.c:2708 src/main/util.c:2711 src/main/util.c:2714 #: src/main/util.c:2718 src/main/util.c:2720 src/main/util.c:2722 #: src/modules/X11/devX11.c:3347 src/modules/X11/devX11.c:3350 #: src/modules/X11/devX11.c:3353 src/modules/X11/devX11.c:3377 #: src/modules/internet/internet.c:324 src/modules/internet/internet.c:330 #: src/modules/internet/internet.c:336 src/modules/internet/internet.c:339 #: src/modules/internet/internet.c:343 src/modules/internet/internet.c:347 #: src/modules/internet/internet.c:351 src/modules/internet/libcurl.c:534 #: src/modules/internet/libcurl.c:538 src/modules/internet/libcurl.c:543 #: src/modules/internet/libcurl.c:546 src/modules/internet/libcurl.c:550 #: src/modules/internet/libcurl.c:553 src/modules/lapack/Lapack.c:170 #: src/modules/lapack/Lapack.c:275 src/modules/lapack/Lapack.c:724 #: src/modules/lapack/Lapack.c:833 src/modules/lapack/Lapack.c:895 #: src/modules/lapack/Lapack.c:1234 src/unix/sys-std.c:1366 #: src/unix/sys-std.c:1389 src/unix/sys-unix.c:691 #, c-format msgid "invalid '%s' argument" msgstr "'%s'参数不对" #: src/gnuwin32/extra.c:186 msgid "unsupported version of Windows" msgstr "不支持这版本的Windows" #: src/gnuwin32/extra.c:681 src/gnuwin32/extra.c:825 src/main/util.c:988 msgid "'path' must be a character vector" msgstr "'path'必需为字符矢量" #: src/gnuwin32/extra.c:873 src/gnuwin32/extra.c:875 src/gnuwin32/extra.c:898 #: src/gnuwin32/extra.c:900 src/gnuwin32/extra.c:935 src/main/gevents.c:63 #: src/main/gevents.c:105 msgid "invalid device" msgstr "设备不对" #: src/gnuwin32/extra.c:876 msgid "requires SDI mode" msgstr "必需用SDI方式" #: src/gnuwin32/extra.c:929 src/main/gevents.c:60 src/main/gevents.c:99 #: src/main/gevents.c:102 msgid "invalid graphical device number" msgstr "图形设备号不对" #: src/gnuwin32/extra.c:939 msgid "bad device" msgstr "设备有错" #: src/gnuwin32/extra.c:1066 src/main/platform.c:1539 msgid "file choice cancelled" msgstr "撤消文件选择" #: src/gnuwin32/run.c:374 #, c-format msgid "'CreateProcess' failed to run '%s'" msgstr "'CreateProcess'调用'%s'失败" #: src/gnuwin32/run.c:531 msgid "Child process not responding. R will terminate it." msgstr "子进程没有反应。R将终止它。" #: src/gnuwin32/run.c:623 #, c-format msgid "Exit code was %d" msgstr "退出代码是%d" #: src/gnuwin32/run.c:656 msgid "Insufficient memory (rpipeOpen)" msgstr "内存不够(rpipeOpen)" #: src/gnuwin32/run.c:899 src/main/dounzip.c:491 msgid "seek not enabled for this connection" msgstr "读取在这个链结无效" #: src/gnuwin32/run.c:905 msgid "truncate not enabled for this connection" msgstr "不能缩短这个链结" #: src/gnuwin32/run.c:965 src/main/connections.c:440 src/main/connections.c:459 #: src/main/connections.c:3205 src/main/printutils.c:930 #: src/main/printutils.c:947 msgid "printing of extremely long output is truncated" msgstr "缩短了极长输出的打印" #: src/gnuwin32/run.c:979 src/gnuwin32/run.c:983 src/gnuwin32/run.c:996 #: src/gnuwin32/run.c:1024 src/main/connections.c:1553 #: src/main/connections.c:1557 src/main/connections.c:1564 #: src/main/connections.c:1579 msgid "allocation of pipe connection failed" msgstr "管道链结分配失败" #: src/gnuwin32/run.c:1038 msgid "'names' is not a character vector" msgstr "'names'必需是字符矢量" #: src/gnuwin32/sys-win32.c:230 msgid "character string expected as first argument" msgstr "第一个参数应当是字符串" #: src/gnuwin32/sys-win32.c:239 msgid "character string expected as third argument" msgstr "第三个参数应当是字符串" #: src/gnuwin32/sys-win32.c:291 src/modules/internet/libcurl.c:330 #: src/modules/internet/libcurl.c:333 src/modules/internet/libcurl.c:336 #: src/modules/internet/libcurl.c:341 src/modules/internet/libcurl.c:367 #, fuzzy, c-format msgid "invalid %s argument" msgstr "'%s'参数不对" #: src/gnuwin32/sys-win32.c:317 src/unix/sys-unix.c:800 src/unix/sys-unix.c:835 #, fuzzy, c-format msgid "command '%s' timed out after %ds" msgstr "运行命令'%s'的状态是%d" #: src/gnuwin32/sys-win32.c:320 src/unix/sys-unix.c:673 #, c-format msgid "running command '%s' had status %d" msgstr "运行命令'%s'的状态是%d" #: src/gnuwin32/system.c:121 src/unix/sys-unix.c:942 msgid "reached session elapsed time limit" msgstr "到达了对话流逝时间限制" #: src/gnuwin32/system.c:123 src/unix/sys-unix.c:944 msgid "reached elapsed time limit" msgstr "到达了流逝时间限制" #: src/gnuwin32/system.c:129 src/unix/sys-unix.c:950 msgid "reached session CPU time limit" msgstr "到达了对话CPU时间限制" #: src/gnuwin32/system.c:131 src/unix/sys-unix.c:952 msgid "reached CPU time limit" msgstr "到达了CPU时间限制" #: src/gnuwin32/system.c:156 #, c-format msgid "Fatal error: %s\n" msgstr "致命错误:%s\n" #: src/gnuwin32/system.c:334 src/unix/sys-std.c:982 #, c-format msgid "encoding '%s' is not recognised" msgstr "编码'%s'不存在" #: src/gnuwin32/system.c:340 src/unix/sys-std.c:989 #, c-format msgid "\n" msgstr "<错误: 无法将编码'%s'重新进行编码>\n" #: src/gnuwin32/system.c:562 src/gnuwin32/system.c:1061 #: src/gnuwin32/system.c:1073 src/main/connections.c:786 #: src/main/connections.c:791 src/main/dounzip.c:180 src/main/saveload.c:2065 #: src/main/serialize.c:2941 src/main/serialize.c:2946 #: src/main/serialize.c:3040 src/main/serialize.c:3087 src/unix/system.c:423 #, c-format msgid "cannot open file '%s': %s" msgstr "无法打开文件'%s': %s" #: src/gnuwin32/system.c:577 #, c-format msgid "file.show(): file '%s' does not exist\n" msgstr "file.show():不存在'%s'这个文件\n" #: src/gnuwin32/system.c:878 #, fuzzy, c-format msgid "Workspace name '%s' is too long\n" msgstr "DLLname '%s'太长" #: src/gnuwin32/system.c:894 src/unix/system.c:459 #, c-format msgid "ARGUMENT '%s' __ignored__\n" msgstr "参数’%s’略过不用\n" #: src/gnuwin32/system.c:1051 #, fuzzy, c-format msgid "option '%s' requires an argument" msgstr "二进列运算需要两个参数" #: src/gnuwin32/system.c:1084 #, fuzzy, c-format msgid "option '%s' requires a non-empty argument" msgstr "二进列运算需要两个参数" #: src/gnuwin32/system.c:1092 src/unix/system.c:442 #, c-format msgid "WARNING: '-e %s' omitted as input is too long\n" msgstr "警告: 因为太长了，'-e %s'这个输入略过不用\n" #: src/gnuwin32/system.c:1096 src/unix/system.c:455 #, c-format msgid "WARNING: unknown option '%s'\n" msgstr "警告: 没有'%s'这样的选项\n" #: src/gnuwin32/system.c:1108 src/unix/system.c:470 msgid "cannot use -e with -f or --file" msgstr "-e选项不能同时和-f或--file一起出现" #: src/gnuwin32/system.c:1126 msgid "creation of tmpfile failed -- set TMPDIR suitably?" msgstr "建立tmpfile失败--设了TMPDIR没有？" #: src/gnuwin32/system.c:1146 src/unix/system.c:540 msgid "you must specify '--save', '--no-save' or '--vanilla'" msgstr "你必需选用'--save'，’--no-save'或'--vanilla'其中的一个" #: src/gnuwin32/system.c:1151 msgid "impossible to create 'reader thread'; you must free some system resources" msgstr "无法建立‘reader thread’，系统资源不够" #: src/include/Errormsg.h:27 msgid "subscript out of bounds" msgstr "下标出界" #: src/include/Errormsg.h:28 #, c-format msgid "object of type '%s' is not subsettable" msgstr "类别为'%s'的对象不可以取子集" #: src/main/CommandLineArgs.c:177 msgid "WARNING: no value given for --encoding" msgstr "警告: 没有设定--enconding的值" #: src/main/CommandLineArgs.c:202 #, c-format msgid "WARNING: option '%s' no longer supported" msgstr "警告: 本版本不再支持'%s'这一选项" #: src/main/CommandLineArgs.c:213 #, c-format msgid "WARNING: no value given for '%s'" msgstr "警告: 没有设定'%s'的值" #: src/main/CommandLineArgs.c:223 #, c-format msgid "WARNING: '%s' value is invalid: ignored" msgstr "警告: '%s'的值不对: 略过不用" #: src/main/CommandLineArgs.c:227 #, c-format msgid "WARNING: %s: too large and ignored" msgstr "警告: %s: 太大，略过不用" #: src/main/CommandLineArgs.c:241 msgid "WARNING: no value given for '--max-ppsize'" msgstr "警告: 没有设定'--max-ppsize'的值" #: src/main/CommandLineArgs.c:246 msgid "WARNING: '--max-ppsize' value is negative: ignored" msgstr "警告: '--max-ppsize'的值是负数: 略过不用" #: src/main/CommandLineArgs.c:248 msgid "WARNING: '--max-ppsize' value is too small: ignored" msgstr "警告: '--max-ppsize'的值太小: 略过不用" #: src/main/CommandLineArgs.c:250 msgid "WARNING: '--max-ppsize' value is too large: ignored" msgstr "警告: '--max-ppsize'的值太大: 略过不用" #: src/main/RNG.c:180 #, c-format msgid "unif_rand: unimplemented RNG kind %d" msgstr "unif_rand: RNG种类%d目前没有实现" #: src/main/RNG.c:265 #, c-format msgid "FixupSeeds: unimplemented RNG kind %d" msgstr "FixupSeeds: RNG种类%d目前没有实现" #: src/main/RNG.c:305 msgid "'user_unif_rand' not in load table" msgstr "'user_unif_rand'在载入表中并不存在" #: src/main/RNG.c:313 msgid "cannot read seeds unless 'user_unif_nseed' is supplied" msgstr "只有在设定了'user_unif_nseed'以后才能读随机种" #: src/main/RNG.c:318 msgid "seed length must be in 0...625; ignored" msgstr "随机种的长度必需在0到625之间; 略过不用" #: src/main/RNG.c:326 #, c-format msgid "RNG_Init: unimplemented RNG kind %d" msgstr "RNG_Init: RNG种类%d目前没有实现" #: src/main/RNG.c:355 msgid "'.Random.seed' is a missing argument with no default" msgstr "'.Random.seed'这个参数没有设定，也没有缺省值" #: src/main/RNG.c:356 #, fuzzy, c-format msgid "'.Random.seed' is not an integer vector but of type '%s', so ignored" msgstr "'.Random.seed'不是整数矢量，类别为'%s'" #: src/main/RNG.c:364 #, fuzzy msgid "'.Random.seed[1]' is not a valid integer, so ignored" msgstr ".Random.seed[1]不是适当的整数" #: src/main/RNG.c:371 #, fuzzy msgid "'.Random.seed[1]' is not a valid Normal type, so ignored" msgstr "'.Random.seed[1]'不是适当的Normal类" #: src/main/RNG.c:385 #, fuzzy msgid "'.Random.seed[1] = 5' but no user-supplied generator, so ignored" msgstr "'.Random.seed[1]=5'但用户指定的发生器却不存在" #: src/main/RNG.c:390 #, fuzzy msgid "'.Random.seed[1]' is not a valid RNG kind so ignored" msgstr "'.Random.seed[1]'不是适当的RNG类" #: src/main/RNG.c:419 msgid "'.Random.seed' has wrong length" msgstr "'.Random.seed'的长度不对" #: src/main/RNG.c:463 msgid "RNGkind: Marsaglia-Multicarry has poor statistical properties" msgstr "" #: src/main/RNG.c:473 #, c-format msgid "RNGkind: unimplemented RNG kind %d" msgstr "RNGkind: RNG种类%d目前没有实现" #: src/main/RNG.c:492 msgid "RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry" msgstr "" #: src/main/RNG.c:495 msgid "RNGkind: deviations from normality for Ahrens-Dieter + Marsaglia-Multicarry" msgstr "" #: src/main/RNG.c:499 msgid "invalid Normal type in 'RNGkind'" msgstr "'RNGkind'里的Normal类不对" #: src/main/RNG.c:502 msgid "'user_norm_rand' not in load table" msgstr "'user_norm_rand'不在载入表中" #: src/main/RNG.c:517 #, fuzzy msgid "invalid sample type in 'RNGkind'" msgstr "'RNGkind'里的Normal类不对" #: src/main/RNG.c:563 msgid "supplied seed is not a valid integer" msgstr "提供的随机种不是正确的正数" #: src/main/Rdynload.c:188 #, c-format msgid "R_MAX_NUM_DLLS must be at least %d" msgstr "" #: src/main/Rdynload.c:194 #, c-format msgid "R_MAX_NUM_DLLS cannot be bigger than %d" msgstr "" #: src/main/Rdynload.c:203 #, c-format msgid "R_MAX_NUM_DLLS cannot be bigger than %d when fd limit is not known" msgstr "" #: src/main/Rdynload.c:209 src/main/Rdynload.c:228 msgid "the limit on the number of open files is too low" msgstr "" #: src/main/Rdynload.c:212 #, c-format msgid "R_MAX_NUM_DLLS bigger than %d may exhaust open files limit" msgstr "" #: src/main/Rdynload.c:235 #, fuzzy msgid "could not allocate space for DLL table" msgstr "无法为'name'分配空间" #: src/main/Rdynload.c:360 msgid "R_RegisterRoutines called with invalid DllInfo object." msgstr "在调用R_RegisterRoutines时DllInfo对象出了错." #: src/main/Rdynload.c:706 msgid "`maximal number of DLLs reached..." msgstr "`已达到了DLL数目的上限..." #: src/main/Rdynload.c:756 msgid "could not allocate space for 'path'" msgstr "无法为'path'分配空间" #: src/main/Rdynload.c:768 #, c-format msgid "DLLname '%s' is too long" msgstr "DLLname '%s'太长" #: src/main/Rdynload.c:797 msgid "could not allocate space for 'name'" msgstr "无法为'name'分配空间" #: src/main/Rdynload.c:807 #, fuzzy msgid "could not allocate space for 'DllInfo'" msgstr "无法为'name'分配空间" #: src/main/Rdynload.c:1075 src/main/Rdynload.c:1091 src/main/util.c:788 msgid "character argument expected" msgstr "需要字符参数" #: src/main/Rdynload.c:1081 src/main/Rdynload.c:1113 src/main/Rdynload.c:1133 #, c-format msgid "" "unable to load shared object '%s':\n" " %s" msgstr "" "无法载入共享目标对象‘%s’：:\n" " %s" #: src/main/Rdynload.c:1094 #, c-format msgid "shared object '%s' was not loaded" msgstr "没有载入共享目标对象'%s'" #: src/main/Rdynload.c:1173 #, fuzzy, c-format msgid "cannot allocate memory for registered native symbol (%d byte)" msgid_plural "cannot allocate memory for registered native symbol (%d bytes)" msgstr[0] "无法给注册了的原始符号分配内存(%d字节)" #: src/main/Rdynload.c:1308 src/main/Rdynload.c:1507 msgid "NULL value passed for DllInfo" msgstr "给DllInfo了一个NULL值" #: src/main/Rdynload.c:1312 msgid "must pass package name or DllInfo reference" msgstr "必需传给程序包名字或DllInfo引用" #: src/main/Rdynload.c:1422 #, c-format msgid "unimplemented type %d in 'createRSymbolObject'" msgstr "'createRSymbolObject'里的种类%d目前没有被实现" #: src/main/Rdynload.c:1504 msgid "R_getRegisteredRoutines() expects a DllInfo reference" msgstr " R_getRegisteredRoutines()需要DllInfo引用" #: src/main/Rdynload.c:1593 #, c-format msgid "function '%s' not provided by package '%s'" msgstr "程序包'%s'不提供'%s'这样的函数" #: src/main/Rdynload.c:1595 msgid "table entry must be an external pointer" msgstr "桌项必需是外部指针" #: src/main/Renviron.c:250 #, c-format msgid "problem in setting variable '%s' in Renviron" msgstr "在Renviron里设定'%s'变量时出了问题" #: src/main/Renviron.c:446 src/main/objects.c:1307 src/main/raw.c:207 #, fuzzy, c-format msgid "argument '%s' must be a character string" msgstr "参数'x'必需是字符串" #: src/main/Renviron.c:450 #, c-format msgid "file '%s' cannot be opened for reading" msgstr "无法读取'%s'文件" #: src/main/Rstrptime.h:526 src/main/Rstrptime.h:1008 #, c-format msgid "use of %s for input is not supported" msgstr "不支持%s这种输入状态" #: src/main/Rstrptime.h:1293 msgid "input string is too long" msgstr "输入字符串太长" #: src/main/Rstrptime.h:1295 msgid "invalid multibyte input string" msgstr "多字节输入字符串不对" #: src/main/Rstrptime.h:1298 msgid "format string is too long" msgstr "格式字符串太长" #: src/main/Rstrptime.h:1300 msgid "invalid multibyte format string" msgstr "多字节格式字符串不对" #: src/main/agrep.c:133 src/main/agrep.c:778 src/main/character.c:1457 #: src/main/character.c:1461 src/main/grep.c:1191 src/main/grep.c:1966 #: src/main/grep.c:1970 src/main/grep.c:2841 src/main/grep.c:3161 #, c-format msgid "argument '%s' has length > 1 and only the first element will be used" msgstr "变数'%s'的长度大于一，因此只能用其第一元素" #: src/main/agrep.c:190 src/main/agrep.c:820 msgid "'pattern' must be a non-empty character string" msgstr "'pattern'必需为非空字符串" #: src/main/agrep.c:201 src/main/agrep.c:829 src/main/grep.c:1241 #: src/main/grep.c:2877 src/main/grep.c:3190 msgid "regular expression is invalid in this locale" msgstr "正规表现不适用于此语言环境" #: src/main/agrep.c:207 src/main/agrep.c:624 #, c-format msgid "regcomp error: '%s'" msgstr "regcomp出错：'%s'" #: src/main/agrep.c:239 src/main/agrep.c:875 src/main/grep.c:562 #: src/main/grep.c:659 src/main/grep.c:769 src/main/grep.c:957 #: src/main/grep.c:1285 src/main/grep.c:2071 src/main/grep.c:2987 #: src/main/grep.c:3067 src/main/grep.c:3227 #, c-format msgid "input string %d is invalid in this locale" msgstr "输入的字符串%d不适用于此语言环境" #: src/main/agrep.c:526 src/main/agrep.c:766 src/main/grep.c:503 #: src/main/grep.c:1182 src/main/grep.c:1184 src/main/grep.c:1469 #: src/main/grep.c:1477 src/main/grep.c:1957 src/main/grep.c:1959 #: src/main/grep.c:2831 src/main/grep.c:2833 src/main/grep.c:3149 #, c-format msgid "argument '%s' will be ignored" msgstr "略过'%s'参数值" #: src/main/agrep.c:615 #, c-format msgid "input string x[%d] is invalid in this locale" msgstr "输入的字符串x[%d]不适用于此语言环境" #: src/main/agrep.c:662 #, c-format msgid "input string y[%d] is invalid in this locale" msgstr "输入的字符串y[%d]不适用于此语言环境" #: src/main/agrep.c:835 src/main/grep.c:3196 #, c-format msgid "regcomp error: '%s'" msgstr "regcomp出错：'%s'" #: src/main/apply.c:98 msgid "'FUN.VALUE' must be a vector" msgstr "'FUN.VALUE'必需是矢量" #: src/main/apply.c:101 src/main/array.c:528 src/main/character.c:989 #: src/main/character.c:1843 src/main/connections.c:3928 src/main/context.c:696 #: src/main/context.c:710 src/main/datetime.c:680 src/main/datetime.c:782 #: src/main/datetime.c:1061 src/main/dotcode.c:222 src/main/errors.c:1176 #: src/main/errors.c:1190 src/main/errors.c:1289 src/main/errors.c:1294 #: src/main/errors.c:1598 src/main/identical.c:67 src/main/identical.c:68 #: src/main/identical.c:69 src/main/identical.c:70 src/main/identical.c:71 #: src/main/identical.c:72 src/main/platform.c:3461 src/main/seq.c:252 #: src/main/seq.c:259 src/main/seq.c:263 src/main/seq.c:368 src/main/seq.c:375 #: src/main/seq.c:378 src/main/seq.c:380 src/main/seq.c:437 src/main/seq.c:441 #: src/main/seq.c:445 src/main/sort.c:1428 src/main/sort.c:1512 #: src/main/sort.c:1516 src/main/sort.c:1523 src/main/source.c:221 #: src/main/summary.c:1200 src/main/sysutils.c:264 src/main/util.c:1115 #: src/main/util.c:1120 src/main/util.c:1127 src/main/util.c:1130 #: src/main/util.c:2430 src/modules/X11/devX11.c:3240 #: src/modules/X11/devX11.c:3267 src/modules/X11/devX11.c:3272 #: src/modules/X11/devX11.c:3277 src/modules/X11/devX11.c:3287 #: src/modules/X11/devX11.c:3292 src/modules/X11/devX11.c:3296 #: src/modules/X11/devX11.c:3300 src/modules/X11/devX11.c:3305 #, c-format msgid "invalid '%s' value" msgstr "'%s'值不对" #: src/main/apply.c:104 src/main/complex.c:760 msgid "invalid length" msgstr "长度不对" #: src/main/apply.c:109 msgid "long vectors are not supported for matrix/array results" msgstr "不支持长向量矩阵/数组结果" #: src/main/apply.c:116 #, c-format msgid "type '%s' is not supported" msgstr "不支持'%s'这一种类" #: src/main/apply.c:164 #, c-format msgid "" "values must be length %d,\n" " but FUN(X[[%d]]) result is length %d" msgstr "" "值的长度必需为%d，\n" " 但FUN(X[[%d]])结果的长度却是%d" #: src/main/apply.c:176 #, c-format msgid "" "values must be type '%s',\n" " but FUN(X[[%d]]) result is type '%s'" msgstr "" "值的种类必需是'%s'，\n" " 但FUN(X[[%d]])结果的种类却是'%s'" #: src/main/apply.c:253 #, c-format msgid "dimnames() is neither NULL nor list of length %d" msgstr "dimnames()的值不是NULL也不是长度为%d的串列 " #: src/main/apply.c:330 src/main/coerce.c:2682 #, fuzzy, c-format msgid "'%s' must be a list or expression" msgstr "'args'必需是串列" #: src/main/arithmetic.c:44 src/main/eval.c:4469 msgid "NaNs produced" msgstr "产生了NaNs" #: src/main/arithmetic.c:45 msgid "non-numeric argument to mathematical function" msgstr "数学函数中用了非数值参数" #: src/main/arithmetic.c:210 msgid "probable complete loss of accuracy in modulus" msgstr "系数精确度很可能完全损失" #: src/main/arithmetic.c:328 msgid "NAs produced by integer overflow" msgstr "整数上溢产生了NA" #: src/main/arithmetic.c:527 msgid "operator needs one or two arguments" msgstr "运算符需要一个或两个参数" #: src/main/arithmetic.c:543 msgid "non-numeric argument to binary operator" msgstr "二进列运算符中有非数值参数" #: src/main/arithmetic.c:598 msgid "" "Recycling array of length 1 in array-vector arithmetic is deprecated.\n" " Use c() or as.vector() instead.\n" msgstr "" #: src/main/arithmetic.c:606 msgid "" "Recycling array of length 1 in vector-array arithmetic is deprecated.\n" " Use c() or as.vector() instead.\n" msgstr "" #: src/main/arithmetic.c:620 src/main/logic.c:93 src/main/relop.c:180 msgid "non-conformable arrays" msgstr "非整合陈列" #: src/main/arithmetic.c:680 src/main/logic.c:136 src/main/relop.c:224 msgid "longer object length is not a multiple of shorter object length" msgstr "长的对象长度不是短的对象长度的整倍数" #: src/main/arithmetic.c:746 msgid "invalid argument to unary operator" msgstr "一进列运算符的参数不对" #: src/main/arithmetic.c:778 src/main/arithmetic.c:804 #: src/main/arithmetic.c:825 msgid "invalid unary operator" msgstr "一进列运算符不对" #: src/main/arithmetic.c:1322 msgid "unimplemented real function of 1 argument" msgstr "一参数的实数函数目前还没有实现" #: src/main/arithmetic.c:1336 src/main/complex.c:643 src/main/complex.c:714 msgid "unimplemented complex function" msgstr "目前没有实现复数功能" #: src/main/arithmetic.c:1626 src/main/arithmetic.c:2031 #: src/main/arithmetic.c:2205 src/main/arithmetic.c:2308 #, c-format msgid "unimplemented real function of %d numeric arguments" msgstr "%d数值参数的实数函数目前没有实现" #: src/main/arithmetic.c:1654 #, fuzzy, c-format msgid "%d argument passed to '%s' which requires 1 or 2 arguments" msgid_plural "%d arguments passed to '%s' which requires 1 or 2 arguments" msgstr[0] "给了%d个参数到'%s'，但它最多只能用两个参数" #: src/main/arithmetic.c:1665 src/main/arithmetic.c:1777 #: src/main/arithmetic.c:1795 src/main/envir.c:1574 src/main/envir.c:2108 #: src/main/eval.c:754 src/main/eval.c:5130 #, c-format msgid "argument \"%s\" is missing, with no default" msgstr "缺少参数\"%s\",也没有缺省值" #: src/main/arithmetic.c:1680 msgid "invalid second argument of length 0" msgstr "第二参数长度为零是不对的" #: src/main/arithmetic.c:1801 msgid "invalid argument 'base' of length 0" msgstr "不能有长度为零的'base'参数" #: src/main/array.c:86 src/main/array.c:2069 #, c-format msgid "'data' must be of a vector type, was '%s'" msgstr "'data'的种类必需为矢量，但现在是'%s'" #: src/main/array.c:106 src/main/array.c:114 msgid "non-numeric matrix extent" msgstr "非数值的矩阵范围" #: src/main/array.c:109 src/main/array.c:2175 msgid "invalid 'nrow' value (too large or NA)" msgstr "'nrow'值不对(要么是太大，要么是含NA)" #: src/main/array.c:111 src/main/array.c:2177 msgid "invalid 'nrow' value (< 0)" msgstr "'nrow'值不对(< 0)" #: src/main/array.c:117 src/main/array.c:2180 msgid "invalid 'ncol' value (too large or NA)" msgstr "'ncol'值不对(要么是太大，要么是含NA)" #: src/main/array.c:119 src/main/array.c:2182 msgid "invalid 'ncol' value (< 0)" msgstr "'ncol'值不对(< 0)" #: src/main/array.c:143 #, c-format msgid "data length [%d] is not a sub-multiple or multiple of the number of rows [%d]" msgstr "数据长度[%d]不是矩阵行数[%d]的整倍" #: src/main/array.c:146 #, c-format msgid "data length [%d] is not a sub-multiple or multiple of the number of columns [%d]" msgstr "数据长度[%d]不是矩阵列数[%d]的整倍数" #: src/main/array.c:149 src/main/array.c:151 #, fuzzy, c-format msgid "data length differs from size of matrix: [%d != %d x %d]" msgstr "数据长度超过了矩阵的大小" #: src/main/array.c:155 msgid "non-empty data for zero-extent matrix" msgstr "" #: src/main/array.c:160 src/main/array.c:2081 src/main/array.c:2189 msgid "too many elements specified" msgstr "设定了太多的元素" #: src/main/array.c:218 msgid "negative extents to matrix" msgstr "矩阵的范围不能是负值" #: src/main/array.c:221 msgid "allocMatrix: too many elements specified" msgstr "allocMatrix: 设定了太多的元素" #: src/main/array.c:249 msgid "negative extents to 3D array" msgstr "三维排列的范围不能是负值" #: src/main/array.c:252 #, fuzzy msgid "'alloc3DArray': too many elements specified" msgstr "'alloc3Darray': 设定了太多的元素" #: src/main/array.c:279 msgid "'allocArray': too many elements specified by 'dims'" msgstr "'allocArray': 'dims'设定了太多的元素" #: src/main/array.c:546 #, fuzzy, c-format msgid "'%s' must be a list or atomic vector" msgstr "'x'必需是NULL串列或原始矢量" #: src/main/array.c:590 #, c-format msgid "a matrix-like object is required as argument to '%s'" msgstr "'%s'必需用矩阵目标对象作参数" #: src/main/array.c:1254 msgid "requires numeric/complex matrix/vector arguments" msgstr "需要数值/复数矩阵/矢量参数" #: src/main/array.c:1364 src/main/array.c:1368 src/main/array.c:1372 msgid "non-conformable arguments" msgstr "非整合参数" #: src/main/array.c:1671 msgid "argument is not a matrix" msgstr "参数不是矩阵" #: src/main/array.c:1706 src/main/attrib.c:1215 #, fuzzy, c-format msgid "invalid first argument, must be %s" msgstr "第一个参数不对, 必需是陈列" #: src/main/array.c:1720 #, c-format msgid "'perm' is of wrong length %d (!= %d)" msgstr "'perm'的长度不对 %d (!= %d)" #: src/main/array.c:1725 src/main/array.c:1728 msgid "'a' does not have named dimnames" msgstr "'a'必需有带名字的dimnames" #: src/main/array.c:1735 #, c-format msgid "'perm[%d]' does not match a dimension name" msgstr "'perm[%d]'和维度名字不相配" #: src/main/array.c:1748 msgid "value out of range in 'perm'" msgstr "'perm'里的值在范围外" #: src/main/array.c:1830 msgid "'resize' must be TRUE or FALSE" msgstr "'resize'的值必需是TRUE或是FALSE" #: src/main/array.c:1900 msgid "'x' must be numeric" msgstr "'x'必需为数值" #: src/main/array.c:1903 #, fuzzy msgid "'x' is too short" msgstr "'object'太短" #: src/main/array.c:2077 msgid "'dims' cannot be of length 0" msgstr "'dims'的长度不能为零" #: src/main/array.c:2185 msgid "'x' must have positive length" msgstr "'x'的长度必需是正数" #: src/main/array.c:2286 #, c-format msgid "singular matrix in 'backsolve'. First zero in diagonal [%d]" msgstr "'backsolve'里出现了奇异矩阵。对角线[%d]里第一个零" #: src/main/attrib.c:40 src/main/attrib.c:249 src/main/attrib.c:281 #: src/main/attrib.c:305 src/main/attrib.c:429 src/main/attrib.c:476 #: src/main/attrib.c:527 msgid "attempt to set an attribute on NULL" msgstr "NULL是不能有属性的" #: src/main/attrib.c:77 #, c-format msgid "row names must be 'character' or 'integer', not '%s'" msgstr "行名必需是'character'或'integer'，不能是'%s'" #: src/main/attrib.c:137 #, c-format msgid "getAttrib: invalid type (%s) for TAG" msgstr "getAttrib: 标记的种类(%s)不对" #: src/main/attrib.c:355 #, fuzzy msgid "cannot set attribute on a symbol" msgstr "无法为本系统设时差区" #: src/main/attrib.c:403 #, fuzzy, c-format msgid "invalid type (%s) for 'names': must be vector or NULL" msgstr "'names'的种类(%s)不对: 必需是矢量" #: src/main/attrib.c:406 #, c-format msgid "'names' attribute [%d] must be the same length as the vector [%d]" msgstr "'names'属性的长度[%d]必需和矢量的长度[%d]一样" #: src/main/attrib.c:411 msgid "names() applied to a non-vector" msgstr "names()不能用于非矢量" #: src/main/attrib.c:419 msgid "invalid time series parameters specified" msgstr "时间系列参数设定不对" #: src/main/attrib.c:433 msgid "'tsp' attribute must be numeric" msgstr "'tsp'属性必需为数值" #: src/main/attrib.c:439 msgid "'tsp' attribute must be numeric of length three" msgstr "'tsp'属性值的长度必需是三" #: src/main/attrib.c:456 msgid "cannot assign 'tsp' to zero-length vector" msgstr "零长度矢量不能设成'tsp'" #: src/main/attrib.c:487 msgid "attempt to set invalid 'comment' attribute" msgstr "无法设定'comment'属性" #: src/main/attrib.c:536 msgid "adding class \"factor\" to an invalid object" msgstr "无法为不适当的对象加\"factor\" 类别" #: src/main/attrib.c:567 msgid "attempt to set invalid 'class' attribute" msgstr "无法设非适当'class'属性" #: src/main/attrib.c:916 #, fuzzy, c-format msgid "invalid to use names()<- on an S4 object of class '%s'" msgstr "在非矢量类别('%s')里不能用names()<-来设'names'这个槽" #: src/main/attrib.c:959 msgid "incompatible 'names' argument" msgstr "非兼容'names'参数" #: src/main/attrib.c:1010 #, c-format msgid "invalid type (%s) to set 'names' attribute" msgstr "设'names'属性时种类(%s)出错" #: src/main/attrib.c:1088 msgid "'dimnames' applied to non-array" msgstr "'dimnames'只能用于陈列" #: src/main/attrib.c:1093 src/main/coerce.c:2685 #, fuzzy, c-format msgid "'%s' must be a list" msgstr "'%s'必需是串列" #: src/main/attrib.c:1096 src/main/attrib.c:1124 #, c-format msgid "length of 'dimnames' [%d] must match that of 'dims' [%d]" msgstr "'dimnames'的长度[%d]必需同'dims'的长度[%d]相等" #: src/main/attrib.c:1130 #, c-format msgid "invalid type (%s) for 'dimnames' (must be a vector)" msgstr "设'dimnames'时的种类(%s)不对(必需为矢量)" #: src/main/attrib.c:1133 #, c-format msgid "length of 'dimnames' [%d] not equal to array extent" msgstr "'dimnames'的长度[%d]必需与陈列范围相等" #: src/main/attrib.c:1217 #, fuzzy, c-format msgid "invalid second argument, must be %s" msgstr "第二个参数不对" #: src/main/attrib.c:1225 msgid "length-0 dimension vector is invalid" msgstr "不能有零长度的大小矢量" #: src/main/attrib.c:1230 msgid "the dims contain missing values" msgstr "dims不能包含缺少值" #: src/main/attrib.c:1232 msgid "the dims contain negative values" msgstr "dims不能包含负值级" #: src/main/attrib.c:1237 msgid "dims do not match the length of object" msgstr "dims与对象长度不匹配" #: src/main/attrib.c:1239 #, c-format msgid "dims [product %d] do not match the length of object [%d]" msgstr "dims [product %d]与对象长度[%d]不匹配" #: src/main/attrib.c:1314 #, c-format msgid "factor level [%d] is duplicated" msgstr "" #: src/main/attrib.c:1342 msgid "attributes must be a list or NULL" msgstr "属性必需是串列或NULL值" #: src/main/attrib.c:1347 msgid "attributes must be named" msgstr "属性必需取名" #: src/main/attrib.c:1351 #, c-format msgid "all attributes must have names [%d does not]" msgstr "所有的属性都必需有名字[%d没有]" #: src/main/attrib.c:1456 msgid "'which' must be of mode character" msgstr "'which'属性的状态必需是字符" #: src/main/attrib.c:1458 msgid "exactly one attribute 'which' must be given" msgstr "只能给一个'which'属性" #: src/main/attrib.c:1519 src/main/attrib.c:1542 src/main/subscript.c:286 #: src/main/subscript.c:290 src/main/subset.c:1320 src/main/subset.c:1378 #, c-format msgid "partial match of '%s' to '%s'" msgstr "'%s'部分匹配到'%s'" #: src/main/attrib.c:1588 #, c-format msgid "invalid type '%s' for slot name" msgstr "槽名字的类别'%s'不对" #: src/main/attrib.c:1635 msgid "'name' must be non-null character string" msgstr "'name'必需为非空字符" #: src/main/attrib.c:1761 src/main/attrib.c:1832 src/main/attrib.c:1866 msgid "invalid type or length for slot name" msgstr "名字槽的类别或长度不对" #: src/main/attrib.c:1795 #, c-format msgid "cannot get a slot (\"%s\") from an object of type \"%s\"" msgstr "类别\"%2$s\"的对象中没有\"%1$s\"这样一个槽" #: src/main/attrib.c:1806 #, c-format msgid "no slot of name \"%s\" for this object of class \"%s\"" msgstr "\"%1$s\"槽名不存在于\"%2$s\"类别对象中" #: src/main/attrib.c:1823 msgid "attempt to set slot on NULL object" msgstr "不能为NULL目标对象设属性" #: src/main/attrib.c:1861 msgid "formal classes cannot be used without the 'methods' package" msgstr "一定要有'methods'程序包才能用正式类别" #: src/main/attrib.c:1873 #, c-format msgid "trying to get slot \"%s\" from an object of a basic class (\"%s\") with no slots" msgstr "无法从没有槽的基本类别(\"%2$s\") 的对象中取得\"%1$s\"槽" #: src/main/attrib.c:1877 #, c-format msgid "trying to get slot \"%s\" from an object (class \"%s\") that is not an S4 object " msgstr "非S4类别的对象(类别为\"%2$s\")没有\"%1$s\"这样的槽" #: src/main/bind.c:165 #, c-format msgid "resulting vector exceeds vector length limit in '%s'" msgstr "'%s'产生了长度超过限制的矢量" #: src/main/bind.c:295 src/main/bind.c:331 src/main/bind.c:380 #: src/main/bind.c:453 src/main/bind.c:481 #, c-format msgid "type '%s' is unimplemented in '%s'" msgstr "'%2$s'里目前还没有实现'%1$s'这一种类" #: src/main/bind.c:729 msgid "repeated formal argument 'recursive'" msgstr "不能有重复的正式参数'recursive' " #: src/main/bind.c:740 msgid "repeated formal argument 'use.names'" msgstr "不能有重复的正式参数'use.names' " #: src/main/bind.c:943 msgid "argument not a list" msgstr "参数不是串列" #: src/main/bind.c:1094 src/main/names.c:1319 src/main/names.c:1324 #: src/main/names.c:1329 src/main/names.c:1334 #, c-format msgid "class name too long in '%s'" msgstr "'%s'里的类别名字太长" #: src/main/bind.c:1163 #, fuzzy, c-format msgid "cannot create a matrix from type '%s'" msgstr "无法按这些种类建立矩阵" #: src/main/bind.c:1233 #, c-format msgid "number of rows of matrices must match (see arg %d)" msgstr "矩阵的行数必需相符(见arg%d)" #: src/main/bind.c:1397 #, fuzzy, c-format msgid "cannot create a matrix of type '%s'" msgstr "无法按这些种类建立矩阵" #: src/main/bind.c:1498 #, c-format msgid "number of columns of matrices must match (see arg %d)" msgstr "矩阵的列数必需相符(见arg%d)" #: src/main/builtin.c:43 msgid "vector size cannot be NA" msgstr "矢量size不能是NA" #: src/main/builtin.c:49 src/main/builtin.c:57 src/main/sort.c:1508 msgid "vector size cannot be NA/NaN" msgstr "矢量大小不能是NA/NaN值" #: src/main/builtin.c:50 src/main/builtin.c:58 src/main/sort.c:1509 msgid "vector size cannot be infinite" msgstr "矢量大小不能是无限值" #: src/main/builtin.c:51 src/main/builtin.c:59 src/main/builtin.c:954 #: src/main/sort.c:1510 msgid "vector size specified is too large" msgstr "矢量size设得太大了" #: src/main/builtin.c:75 src/main/builtin.c:112 src/main/envir.c:1856 #: src/main/envir.c:1977 src/main/envir.c:2066 src/main/envir.c:2200 #: src/main/paste.c:93 src/main/paste.c:339 src/main/random.c:479 #: src/main/random.c:508 src/main/unique.c:2160 msgid "invalid first argument" msgstr "第一个参数不对" #: src/main/builtin.c:84 src/main/builtin.c:93 src/main/builtin.c:317 #: src/main/builtin.c:351 src/main/builtin.c:404 src/main/builtin.c:418 #: src/main/coerce.c:1592 src/main/connections.c:3364 src/main/engine.c:3234 #: src/main/envir.c:1004 src/main/envir.c:1058 src/main/envir.c:1224 #: src/main/envir.c:1257 src/main/envir.c:1865 src/main/envir.c:1982 #: src/main/envir.c:2017 src/main/envir.c:2075 src/main/envir.c:2207 #: src/main/envir.c:2934 src/main/envir.c:3021 src/main/envir.c:3324 #: src/main/envir.c:3353 src/main/envir.c:3374 src/main/envir.c:3397 #: src/main/envir.c:3432 src/main/envir.c:3453 src/main/envir.c:3500 #: src/main/envir.c:3959 src/main/envir.c:3964 src/main/eval.c:8068 #: src/main/objects.c:243 src/main/objects.c:251 src/main/saveload.c:2174 #: src/main/saveload.c:2471 src/main/serialize.c:3110 msgid "use of NULL environment is defunct" msgstr "NULL环境不再有用" #: src/main/builtin.c:259 src/main/builtin.c:274 #, fuzzy msgid "argument is not a function" msgstr "参数不能是函数" #: src/main/builtin.c:331 msgid "replacement object is not an environment" msgstr "替换对象不是环境" #: src/main/builtin.c:355 msgid "'enclos' must be an environment" msgstr "'enclos'必需是环境" #: src/main/builtin.c:373 src/main/builtin.c:409 msgid "argument is not an environment" msgstr "参数不是环境" #: src/main/builtin.c:375 msgid "the empty environment has no parent" msgstr "空环境没有父母环境" #: src/main/builtin.c:411 msgid "can not set parent of the empty environment" msgstr "无法为空环境设父母环境" #: src/main/builtin.c:413 #, fuzzy msgid "can not set the parent environment of a namespace" msgstr "无法为空环境设父母环境" #: src/main/builtin.c:415 #, fuzzy msgid "can not set the parent environment of package imports" msgstr "无法为空环境设父母环境" #: src/main/builtin.c:423 msgid "'parent' is not an environment" msgstr "'parent'不是环境" #: src/main/builtin.c:569 src/main/connections.c:4070 #: src/main/connections.c:4453 src/main/connections.c:4490 #: src/main/connections.c:4873 src/main/connections.c:4943 #: src/main/connections.c:5161 src/main/connections.c:5165 #: src/main/connections.c:5643 src/main/deparse.c:402 src/main/deparse.c:488 #: src/main/serialize.c:2381 msgid "cannot write to this connection" msgstr "无法写入此链结" #: src/main/builtin.c:574 src/main/builtin.c:604 #, c-format msgid "invalid '%s' specification" msgstr "'%s'设定不对" #: src/main/builtin.c:591 msgid "non-positive 'fill' argument will be ignored" msgstr "略过负的'fill'参数值" #: src/main/builtin.c:666 #, c-format msgid "argument %d (type '%s') cannot be handled by 'cat'" msgstr "cat目前还不能处理%d(种类为'%s')参数" #: src/main/builtin.c:810 #, c-format msgid "vector: cannot make a vector of mode '%s'." msgstr "矢量: 无法建立状态为\"%s\"的矢量." #: src/main/builtin.c:836 #, fuzzy msgid "cannot set length of non-(vector or list)" msgstr "不能设非矢量的长度" #: src/main/builtin.c:837 src/main/character.c:665 src/main/coerce.c:3051 msgid "invalid value" msgstr "值不对" #: src/main/builtin.c:839 msgid "length of NULL cannot be changed" msgstr "" #: src/main/builtin.c:950 src/main/envir.c:2217 src/main/envir.c:2225 #, c-format msgid "wrong length for '%s' argument" msgstr "'%s'参数的长度不对" #: src/main/builtin.c:980 src/main/coerce.c:2755 src/main/coerce.c:2798 #: src/main/eval.c:744 src/main/eval.c:874 src/main/eval.c:3057 #: src/main/eval.c:3146 src/main/eval.c:3217 src/main/eval.c:3559 #: src/main/eval.c:7055 src/main/eval.c:7202 msgid "'...' used in an incorrect context" msgstr "'...'用在的上下文不对" #: src/main/builtin.c:1002 #, c-format msgid "duplicate 'switch' defaults: '%s' and '%s'" msgstr "重复'switch'默认值：'%s'和'%s'" #: src/main/builtin.c:1035 msgid "'EXPR' is missing" msgstr "缺少'EXPR'" #: src/main/builtin.c:1039 src/main/eval.c:7618 msgid "EXPR must be a length 1 vector" msgstr "EXPR必需是长度为一的矢量" #: src/main/builtin.c:1042 src/main/eval.c:7621 #, c-format msgid "" "EXPR is a \"factor\", treated as integer.\n" " Consider using '%s' instead." msgstr "" #: src/main/builtin.c:1099 src/main/eval.c:7631 src/main/eval.c:7660 #, fuzzy msgid "'switch' with no alternatives" msgstr "没有名字替代的'switch'需要数值EXPR" #: src/main/character.c:117 src/main/character.c:305 #, fuzzy, c-format msgid "%d argument passed to '%s' which requires %d to %d" msgid_plural "%d arguments passed to '%s' which requires %d to %d" msgstr[0] "%d个参数给'%s'，但它只需要%d个" #: src/main/character.c:124 src/main/character.c:127 src/main/character.c:314 #: src/main/character.c:317 #, c-format msgid "'%s' requires a character vector" msgstr "'%s'需要字符矢量" #: src/main/character.c:176 src/main/character.c:202 src/main/character.c:216 #: src/main/character.c:281 src/main/character.c:388 src/main/character.c:593 #: src/main/character.c:598 #, fuzzy, c-format msgid "invalid multibyte string, %s" msgstr "多字节字符串%d有错" #: src/main/character.c:192 #, fuzzy, c-format msgid "number of characters is not computable in \"bytes\" encoding, %s" msgstr "\"bytes\"编码里无法为％%d元素计算字符数" #: src/main/character.c:245 #, fuzzy, c-format msgid "width is not computable for %s in \"bytes\" encoding" msgstr "\"bytes\"编码里无法为％%d元素计算长度" #: src/main/character.c:345 #, fuzzy, c-format msgid "invalid multibyte string, element %ld" msgstr "多字节字符串%d有错" #: src/main/character.c:348 #, fuzzy, c-format msgid "number of characters is not computable in \"bytes\" encoding, element %ld" msgstr "\"bytes\"编码里无法为％%d元素计算字符数" #: src/main/character.c:351 #, fuzzy, c-format msgid "width is not computable in \"bytes\" encoding, element %ld" msgstr "\"bytes\"编码里无法为％%d元素计算长度" #: src/main/character.c:429 msgid "extracting substrings from a non-character object" msgstr "无法从非字符对象里抽取子字串" #: src/main/character.c:440 src/main/character.c:662 msgid "invalid substring arguments" msgstr "子字符串参数不对" #: src/main/character.c:485 #, fuzzy msgid "non-character object(s)" msgstr "不能有非字符名字" #: src/main/character.c:657 msgid "replacing substrings in a non-character object" msgstr "无法在非字符的对象里替换子字串" #: src/main/character.c:927 msgid "the first argument must be a character vector" msgstr "第一参数必需是字符矢量" #: src/main/character.c:964 msgid "abbreviate used with non-ASCII chars" msgstr "abbreviate不适用于非ASCII字元" #: src/main/character.c:985 msgid "non-character names" msgstr "不能有非字符名字" #: src/main/character.c:1038 src/main/character.c:1167 #, c-format msgid "invalid multibyte string %d" msgstr "多字节字符串%d有错" #: src/main/character.c:1080 src/main/grep.c:507 msgid "non-character argument" msgstr "非字符参数" #: src/main/character.c:1223 #, c-format msgid "decreasing range specification ('%lc-%lc')" msgstr "不能设定递减的范围('%lc-%lc')" #: src/main/character.c:1309 #, c-format msgid "decreasing range specification ('%c-%c')" msgstr "不能设定递减的范围('%c-%c')" #: src/main/character.c:1499 src/main/character.c:1505 msgid "invalid UTF-8 string 'old'" msgstr "UTF-8字符串'old'有错" #: src/main/character.c:1511 msgid "invalid multibyte string 'old'" msgstr "多字节字符串'old'有错" #: src/main/character.c:1524 src/main/character.c:1530 msgid "invalid UTF-8 string 'new'" msgstr "UTF-8字符串'new'有错" #: src/main/character.c:1536 msgid "invalid multibyte string 'new'" msgstr "多字节字符串'new'有错" #: src/main/character.c:1564 src/main/character.c:1653 msgid "'old' is longer than 'new'" msgstr "'old'比'new'要长" #: src/main/character.c:1596 #, c-format msgid "invalid input multibyte string %d" msgstr "输入的多字节字符串%d有错" #: src/main/character.c:1702 msgid "strtrim() requires a character vector" msgstr "strtrim()需要字符矢量" #: src/main/coerce.c:33 msgid "invalid 'mode' argument" msgstr "'mode'参数不对" #: src/main/coerce.c:34 msgid "applies only to lists and vectors" msgstr "只能用于串列和矢量" #: src/main/coerce.c:81 src/main/errors.c:1409 msgid "NAs introduced by coercion" msgstr "强制改变过程中产生了NA" #: src/main/coerce.c:83 #, fuzzy msgid "NAs introduced by coercion to integer range" msgstr "强制改变过程中产生了NA" #: src/main/coerce.c:85 src/main/errors.c:1411 msgid "imaginary parts discarded in coercion" msgstr "强制改变时丢弃了虚数部分" #: src/main/coerce.c:87 msgid "out-of-range values treated as 0 in coercion to raw" msgstr "在强制改变成原始值时，任何溢位值当作零来处理" #: src/main/coerce.c:418 #, c-format msgid "invalid data of mode '%s' (too short)" msgstr "数据状态为\"%s\"不对(太短了)" #: src/main/coerce.c:1019 src/main/coerce.c:1141 src/main/coerce.c:1164 #, fuzzy, c-format msgid "'%s' object cannot be coerced to type '%s'" msgstr "'pairlist'对象不能被强制改变成'%s'种类" #: src/main/coerce.c:1194 src/main/coerce.c:1540 msgid "no method for coercing this S4 class to a vector" msgstr "没有可用来把这个S4类别强迫改为矢量的方法" #: src/main/coerce.c:1263 msgid "environments cannot be coerced to other types" msgstr "环境不能被强制改变成其他种类" #: src/main/coerce.c:1423 msgid "attempting to coerce non-factor" msgstr "不能强迫改变非因子" #: src/main/coerce.c:1428 src/main/coerce.c:1438 msgid "malformed factor" msgstr "" #: src/main/coerce.c:1588 msgid "list argument expected" msgstr "需要串列参数" #: src/main/coerce.c:1596 src/main/eval.c:8072 msgid "invalid environment" msgstr "环境不对" #: src/main/coerce.c:1600 msgid "argument must have length at least 1" msgstr "参数的长度至少要为一" #: src/main/coerce.c:1622 msgid "invalid body for function" msgstr "函数定义本体不对" #: src/main/coerce.c:1648 #, fuzzy msgid "argument must be character" msgstr "参数'x'必需是字符串" #: src/main/coerce.c:1653 #, fuzzy msgid "argument must be a character string" msgstr "参数'x'必需是字符串" #: src/main/coerce.c:1694 #, c-format msgid "parsing result not of length one, but %d" msgstr "" #: src/main/coerce.c:1726 msgid "invalid length 0 argument" msgstr "长度为零的参数是不对的" #: src/main/coerce.c:1742 msgid "as.call() not feasible; consider str2lang()" msgstr "" #: src/main/coerce.c:1745 msgid "invalid argument list" msgstr "参数串列不对" #: src/main/coerce.c:1766 #, c-format msgid "'length(x) = %lld > 1' in coercion to '%s'" msgstr "" #: src/main/coerce.c:2110 msgid "type \"single\" unimplemented in R" msgstr "\"single\"种类目前在R里还没有实现" #: src/main/coerce.c:2112 msgid "unimplemented predicate" msgstr "没有实现的谓词" #: src/main/coerce.c:2286 #, c-format msgid "%s() applied to non-(list or vector) of type '%s'" msgstr "%s()不适用于类别为'%s'的非串列或非矢量" #: src/main/coerce.c:2482 src/main/coerce.c:2543 src/main/coerce.c:2619 #, c-format msgid "default method not implemented for type '%s'" msgstr "没有为'%s'类型实现默认的方法" #: src/main/coerce.c:2639 msgid "'name' is missing" msgstr "缺少'name'" #: src/main/coerce.c:2646 msgid "first argument must be a character string" msgstr "第一个参数必需是字符串" #: src/main/coerce.c:2678 #, fuzzy msgid "'what' must be a function or character string" msgstr "'text'必需为字符串" #: src/main/coerce.c:2689 src/main/unique.c:1763 msgid "'envir' must be an environment" msgstr "'envir'必需是环境" #: src/main/coerce.c:2849 msgid "invalid environment specified" msgstr "环境设定有错" #: src/main/coerce.c:2918 msgid "Setting class(x) to NULL; result will no longer be an S4 object" msgstr "把class(x)设成NULL；其结果不再是S4目标对象" #: src/main/coerce.c:2921 #, c-format msgid "Setting class(x) to multiple strings (\"%s\", \"%s\", ...); result will no longer be an S4 object" msgstr "把class(x)设成多结字符串(\"%s\", \"%s\", ...); 其结果不再是S4目标对象" #: src/main/coerce.c:2925 #, c-format msgid "Setting class(x) to \"%s\" sets attribute to NULL; result will no longer be an S4 object" msgstr "把class(x)设成\"%s\"集空属性; 其结果不再是S4目标对象" #: src/main/coerce.c:2956 msgid "invalid replacement object to be a class string" msgstr "字符串类别的替换对象不对" #: src/main/coerce.c:2974 #, c-format msgid "\"%s\" can only be set as the class if the object has this type; found \"%s\"" msgstr "只有在对象有这一类别的情况下才能设\"%s\"；不应该有\"%s\"" #: src/main/coerce.c:2992 #, c-format msgid "invalid to set the class to matrix unless the dimension attribute is of length 2 (was %d)" msgstr "除非维度的长度为二(目前是%d)，否则不能设为矩阵类别" #: src/main/coerce.c:3000 msgid "cannot set class to \"array\" unless the dimension attribute has length > 0" msgstr "除非维度的长度大于零，否则不能设为\"array\"类别" #: src/main/coerce.c:3042 msgid "'value' must be non-null character string" msgstr "'value'必需为非空字符" #: src/main/coerce.c:3055 msgid "invalid to change the storage mode of a factor" msgstr "不能改变因子的存储方式" #: src/main/complex.c:95 msgid "invalid complex unary operator" msgstr "复数一进列运算符有错" #: src/main/complex.c:227 msgid "unimplemented complex operation" msgstr "复数运算目前还没有实现" #: src/main/complex.c:347 msgid "non-numeric argument to function" msgstr "函数不能有非数值参数" #: src/main/complex.c:838 msgid "invalid polynomial coefficient" msgstr "多项式系数不对" #: src/main/complex.c:843 msgid "root finding code failed" msgstr "寻根码运行失败" #: src/main/connections.c:153 msgid "all connections are in use" msgstr "所有链结都已在运行" #: src/main/connections.c:164 msgid "connection not found" msgstr "找不到链结" #: src/main/connections.c:175 src/main/connections.c:5657 msgid "invalid connection" msgstr "链结不对" #: src/main/connections.c:207 #, c-format msgid "closing unused connection %d (%s)\n" msgstr "关闭不再使用的链结%d(%s)\n" #: src/main/connections.c:232 src/main/serialize.c:1686 #: src/main/serialize.c:1709 src/main/sysutils.c:647 src/main/sysutils.c:891 #: src/main/sysutils.c:906 src/main/sysutils.c:1113 src/main/sysutils.c:1179 #: src/main/sysutils.c:1260 src/main/sysutils.c:1270 src/main/sysutils.c:1283 #: src/main/sysutils.c:1700 #, c-format msgid "unsupported conversion from '%s' to '%s'" msgstr "不支持'%s'到'%s'的这种转换" #: src/main/connections.c:395 src/main/connections.c:410 #: src/main/connections.c:582 src/main/connections.c:587 #: src/main/connections.c:592 src/main/connections.c:603 #: src/main/connections.c:609 #, c-format msgid "%s not enabled for this connection" msgstr "%s对这个链结无效" #: src/main/connections.c:482 msgid "invalid char string in output conversion" msgstr "输出转换字符串有错" #: src/main/connections.c:563 #, c-format msgid "invalid input found on input connection '%s'" msgstr "输入链结'%s'内的输入不对" #: src/main/connections.c:761 src/main/platform.c:1059 #, c-format msgid "cannot open file '%ls': %s" msgstr "无法打开文件'%ls': %s" #: src/main/connections.c:765 #, fuzzy, c-format msgid "cannot open file '%ls': it is a directory" msgstr "无法打开文件'%ls': %s" #: src/main/connections.c:795 src/main/connections.c:1702 #: src/main/connections.c:1853 src/main/connections.c:2049 #, fuzzy, c-format msgid "cannot open file '%s': it is a directory" msgstr "无法打开文件'%s': %s" #: src/main/connections.c:908 msgid "connection is not open for reading" msgstr "链结没有打开，不能读" #: src/main/connections.c:913 msgid "connection is not open for writing" msgstr "链结没有打开，不能写" #: src/main/connections.c:951 src/main/connections.c:2495 msgid "can only truncate connections open for writing" msgstr "只能缩短已经打开了的可以写的链结" #: src/main/connections.c:955 src/main/connections.c:957 msgid "file truncation failed" msgstr "未能缩短文件" #: src/main/connections.c:959 msgid "file truncation unavailable on this platform" msgstr "本平台上没有文件缩短功能" #: src/main/connections.c:1005 src/main/connections.c:1009 #: src/main/connections.c:1016 src/main/connections.c:1034 msgid "allocation of file connection failed" msgstr "文件链结分配失败" #: src/main/connections.c:1086 src/main/connections.c:1261 #, c-format msgid "cannot create fifo '%s', reason '%s'" msgstr "由于'%2$s'的原因，无法建立先进先出'%1$s'" #: src/main/connections.c:1092 #, c-format msgid "'%s' exists but is not a fifo" msgstr "'%s'存在但不是先进先出" #: src/main/connections.c:1106 #, c-format msgid "fifo '%s' is not ready" msgstr "先进先出'%s'还没有准备好" #: src/main/connections.c:1107 #, c-format msgid "cannot open fifo '%s'" msgstr "无法打开先进先出'%s'" #: src/main/connections.c:1148 src/main/connections.c:1159 #: src/main/connections.c:1320 src/main/connections.c:1339 #: src/main/connections.c:1768 src/main/connections.c:1778 #: src/main/connections.c:1908 src/main/connections.c:1968 #: src/main/connections.c:2512 src/main/connections.c:2529 #: src/main/connections.c:2840 src/main/connections.c:5829 #: src/main/connections.c:5893 msgid "too large a block specified" msgstr "区组太大" #: src/main/connections.c:1222 #, fuzzy msgid "allocation of fifo name failed" msgstr "先进先出链结分配失败" #: src/main/connections.c:1283 #, fuzzy, c-format msgid "cannot open fifo '%s', reason '%s'" msgstr "无法打开URL'%s'，原因是'%s'" #: src/main/connections.c:1323 src/main/connections.c:1347 #, fuzzy msgid "allocation of fifo buffer failed" msgstr "先进先出链结分配失败" #: src/main/connections.c:1355 #, fuzzy, c-format msgid "cannot write FIFO '%s'" msgstr "无法打开URL'%s'" #: src/main/connections.c:1391 src/main/connections.c:1395 #: src/main/connections.c:1402 src/main/connections.c:1419 msgid "allocation of fifo connection failed" msgstr "先进先出链结分配失败" #: src/main/connections.c:1439 src/main/connections.c:1604 #: src/main/connections.c:2261 src/main/connections.c:3531 #: src/main/connections.c:5378 msgid "only first element of 'description' argument used" msgstr "只用了'description'参数的第一个元素" #: src/main/connections.c:1456 msgid "fifo(\"\") only supports open = \"w+\" and open = \"w+b\": using the former" msgstr "fifo(\"\")只支持open = \"w+\"和open = \"w+b\"这两种模式：现在使用前者" #: src/main/connections.c:1471 src/main/connections.c:1642 #: src/main/connections.c:2329 src/main/connections.c:3499 #: src/main/connections.c:3553 src/main/connections.c:3601 #: src/main/connections.c:3940 src/main/connections.c:4062 #: src/main/connections.c:4227 src/main/connections.c:4483 #: src/main/connections.c:4810 src/main/connections.c:4936 #: src/main/connections.c:5157 src/main/connections.c:5624 src/main/dcf.c:93 #: src/main/deparse.c:394 src/main/deparse.c:480 src/main/saveload.c:2371 #: src/main/saveload.c:2456 src/main/scan.c:947 src/main/serialize.c:2552 #: src/main/serialize.c:2601 src/main/source.c:290 msgid "cannot open the connection" msgstr "无法打开链结" #: src/main/connections.c:1486 msgid "fifo connections are not available on this system" msgstr "本系统没有先进先出链结这个功能" #: src/main/connections.c:1517 #, c-format msgid "cannot pipe() cmd '%ls': %s" msgstr "无法pipe()命令'%ls': %s" #: src/main/connections.c:1524 #, c-format msgid "cannot open pipe() cmd '%s': %s" msgstr "无法打开pipe()命令'%s': %s" #: src/main/connections.c:1707 src/main/connections.c:2044 #, c-format msgid "cannot open compressed file '%s', probable reason '%s'" msgstr "无法打开压缩文件'%s'，可能是因为'%s'" #: src/main/connections.c:1748 msgid "whence = \"end\" is not implemented for gzfile connections" msgstr "whence = \"end\"不适用于gz文件链结" #: src/main/connections.c:1753 msgid "seek on a gzfile connection returned an internal error" msgstr "读取gz文件链结时内部出错" #: src/main/connections.c:1787 src/main/connections.c:1791 #: src/main/connections.c:1798 src/main/connections.c:1816 msgid "allocation of gzfile connection failed" msgstr "分配gz文件链结失败" #: src/main/connections.c:1848 #, c-format msgid "cannot open bzip2-ed file '%s', probable reason '%s'" msgstr "无法打开bzip2压缩文件'%s'，原因可能是'%s'" #: src/main/connections.c:1862 #, c-format msgid "file '%s' appears not to be compressed by bzip2" msgstr "文件'%s'看起来不象是bzip2类" #: src/main/connections.c:1871 #, c-format msgid "initializing bzip2 compression for file '%s' failed" msgstr "在开始给'%s'文件进行bzip2压缩时出现了错误" #: src/main/connections.c:1926 msgid "allocation of overflow buffer for bzfile failed" msgstr "为bzfile分配溢出缓冲区失败" #: src/main/connections.c:1933 #, c-format msgid "file '%s' has trailing content that appears not to be compressed by bzip2" msgstr "文件'%s'结尾的内容看起来不是由bzip2压缩的" #: src/main/connections.c:1979 src/main/connections.c:1983 #: src/main/connections.c:1990 src/main/connections.c:2008 msgid "allocation of bzfile connection failed" msgstr "分配bz文件链结失败" #: src/main/connections.c:2062 src/main/connections.c:6602 #, c-format msgid "cannot initialize lzma decoder, error %d" msgstr "无法为lzma译码器进行初始化，错误是%d" #: src/main/connections.c:2078 #, c-format msgid "cannot initialize lzma encoder, error %d" msgstr "无法为lzma编码器进行初始化，错误是%d " #: src/main/connections.c:2207 src/main/connections.c:2211 #: src/main/connections.c:2218 src/main/connections.c:2237 msgid "allocation of xzfile connection failed" msgstr "分配xzfile文件链结失败" #: src/main/connections.c:2298 #, c-format msgid "this is a %s-compressed file which this build of R does not support" msgstr "这一版本的R不支持%s-压缩文件" #: src/main/connections.c:2395 src/modules/X11/devX11.c:3481 msgid "memory allocation to copy clipboard failed" msgstr "抄写裁剪板时内存分配失败" #: src/main/connections.c:2400 src/modules/X11/devX11.c:3460 #: src/modules/X11/devX11.c:3465 msgid "clipboard cannot be opened or contains no text" msgstr "打不开裁剪板，或是裁剪板不含文字" #: src/main/connections.c:2411 msgid "memory allocation to open clipboard failed" msgstr "打开裁剪板时内存分配失败" #: src/main/connections.c:2440 msgid "unable to open the clipboard" msgstr "无法打开裁剪板" #: src/main/connections.c:2444 msgid "unable to write to the clipboard" msgstr "无法写入裁剪板" #: src/main/connections.c:2484 msgid "attempt to seek outside the range of the clipboard" msgstr "无法读取裁剪板范围外的内容" #: src/main/connections.c:2527 msgid "clipboard connection is open for reading only" msgstr "打开了只读裁剪板链结" #: src/main/connections.c:2547 msgid "clipboard buffer is full and output lost" msgstr "裁剪板缓冲区已满，丢失了输出" #: src/main/connections.c:2568 msgid "'mode' for the clipboard must be 'r' or 'w'" msgstr "裁剪板'mode'必需是'r'或'w'" #: src/main/connections.c:2571 msgid "'mode' for the clipboard must be 'r' on Unix" msgstr "Unix操作系统上裁剪板'mode'必需是'r'" #: src/main/connections.c:2574 src/main/connections.c:2580 #: src/main/connections.c:2587 src/main/connections.c:2605 msgid "allocation of clipboard connection failed" msgstr "裁剪板链结分配失败" #: src/main/connections.c:2675 src/main/connections.c:2679 #: src/main/connections.c:2686 msgid "allocation of terminal connection failed" msgstr "终端链结分配失败" #: src/main/connections.c:2817 msgid "attempting to add too many elements to raw vector" msgstr "不能给原始矢量加大多元素" #: src/main/connections.c:2869 msgid "attempt to seek outside the range of the raw connection" msgstr "无法读取原始链结范围外的内容" #: src/main/connections.c:2880 src/main/connections.c:2884 #: src/main/connections.c:2891 src/main/connections.c:2918 msgid "allocation of raw connection failed" msgstr "原始链结分配失败" #: src/main/connections.c:2970 #, fuzzy, c-format msgid "'%s' is not a %s" msgstr "先进先出'%s'还没有准备好" #: src/main/connections.c:2974 #, fuzzy, c-format msgid "internal connection is not a %s" msgstr "链结没有打开" #: src/main/connections.c:2987 msgid "'con' is not an output rawConnection" msgstr "'con'不是输出链结rawConnection" #: src/main/connections.c:3027 msgid "too many characters for text connection" msgstr "字符太多了，无法用文字链结" #: src/main/connections.c:3032 msgid "cannot allocate memory for text connection" msgstr "无法给文字链结分配内存" #: src/main/connections.c:3082 msgid "seek is not relevant for text connection" msgstr "读取不适用于文字链结" #: src/main/connections.c:3091 src/main/connections.c:3095 #: src/main/connections.c:3102 src/main/connections.c:3116 #: src/main/connections.c:3304 src/main/connections.c:3308 #: src/main/connections.c:3315 src/main/connections.c:3329 #: src/main/connections.c:3336 msgid "allocation of text connection failed" msgstr "文字链结分配失败" #: src/main/connections.c:3279 msgid "text connection: appending to a non-existent char vector" msgstr "文字链结: 不能符加给不存在的字符矢量" #: src/main/connections.c:3391 msgid "unsupported mode" msgstr "不支持此状态" #: src/main/connections.c:3414 msgid "'con' is not an output textConnection" msgstr "'con'不是输出链结" #: src/main/connections.c:3581 src/main/connections.c:3630 #: src/main/connections.c:3641 src/main/connections.c:3725 #: src/main/connections.c:3755 src/main/connections.c:3778 #: src/main/connections.c:3790 src/main/connections.c:3916 #: src/main/connections.c:4047 src/main/connections.c:5933 msgid "'con' is not a connection" msgstr "'con'不是链结" #: src/main/connections.c:3584 msgid "cannot open standard connections" msgstr "无法打开标准链结" #: src/main/connections.c:3586 msgid "connection is already open" msgstr "链结已打开" #: src/main/connections.c:3619 msgid "unknown 'rw' value" msgstr "没有这样的'rw'值" #: src/main/connections.c:3654 #, fuzzy, c-format msgid "Problem closing connection: %s" msgstr "写入链结有问题" #: src/main/connections.c:3656 #, fuzzy msgid "Problem closing connection" msgstr "写入链结有问题" #: src/main/connections.c:3727 msgid "cannot close standard connections" msgstr "无法关闭标准链结" #: src/main/connections.c:3730 msgid "cannot close 'output' sink connection" msgstr "无法关闭'output'汇集链结" #: src/main/connections.c:3732 msgid "cannot close 'message' sink connection" msgstr "无法关闭'message'汇集链结" #: src/main/connections.c:3757 src/main/connections.c:5642 #: src/main/connections.c:5650 src/main/serialize.c:2371 #: src/main/serialize.c:2379 msgid "connection is not open" msgstr "链结没有打开" #: src/main/connections.c:3855 src/main/connections.c:3868 #, fuzzy, c-format msgid "line longer than buffer size %lu" msgstr "行要比缓冲区要大" #: src/main/connections.c:3886 #, fuzzy, c-format msgid "Error writing to connection: %s" msgstr "链结书写发生了错误" #: src/main/connections.c:3888 #, fuzzy msgid "Error writing to connection" msgstr "链结书写发生了错误" #: src/main/connections.c:3947 src/main/connections.c:3949 #: src/main/connections.c:4235 src/main/connections.c:4793 #: src/main/connections.c:4818 src/main/connections.c:5651 src/main/dcf.c:100 #: src/main/scan.c:950 src/main/scan.c:954 src/main/serialize.c:2373 #: src/main/source.c:293 msgid "cannot read from this connection" msgstr "无法从此链结读取" #: src/main/connections.c:3961 src/main/connections.c:3983 msgid "cannot allocate buffer in readLines" msgstr "无法给readLines分配缓冲区" #: src/main/connections.c:4001 #, c-format msgid "line %d appears to contain an embedded nul" msgstr "" #: src/main/connections.c:4019 #, c-format msgid "incomplete final line found on '%s'" msgstr "读'%s'时最后一行未遂" #: src/main/connections.c:4025 msgid "too few lines read in readLines" msgstr "readLines读的行数不够" #: src/main/connections.c:4132 msgid "incomplete string at end of file has been discarded" msgstr "略过文件末不完整的字符串" #: src/main/connections.c:4138 msgid "null terminator not found: breaking string at 10000 bytes" msgstr "没有null终止符: 字符串截断于10000个字节" #: src/main/connections.c:4203 msgid "can only read from a binary connection" msgstr "无法读二进列链结" #: src/main/connections.c:4251 src/main/connections.c:4552 msgid "size changing is not supported for complex vectors" msgstr "不支持复数矢量大小的改变" #: src/main/connections.c:4296 src/main/connections.c:4330 #: src/main/connections.c:4374 src/main/connections.c:4405 #: src/main/connections.c:4425 src/main/connections.c:4546 #: src/main/connections.c:4604 src/main/connections.c:4635 #, c-format msgid "size %d is unknown on this machine" msgstr "本系统没有%d这样大小的值" #: src/main/connections.c:4315 msgid "raw is always of size 1" msgstr "raw的大小只能是一" #: src/main/connections.c:4338 msgid "'signed = FALSE' is only valid for integers of sizes 1 and 2" msgstr "'signed = FALSE'唯一有效的尺寸是1和2" #: src/main/connections.c:4444 msgid "'x' is not an atomic vector type" msgstr "'x'非基元矢量种类" #: src/main/connections.c:4451 msgid "can only write to a binary connection" msgstr "只能写入二进列链结" #: src/main/connections.c:4471 msgid "only 2^31-1 bytes can be written to a raw vector" msgstr "写原始矢量最多只能用2^31-1字节" #: src/main/connections.c:4473 msgid "only 2^31-1 bytes can be written in a single writeBin() call" msgstr "单次调用writeBin()的话最多只能写2^31-1字节" #: src/main/connections.c:4525 src/main/connections.c:4663 #: src/main/connections.c:4967 src/main/connections.c:5007 msgid "problem writing to connection" msgstr "写入链结有问题" #: src/main/connections.c:4557 msgid "size changing is not supported for raw vectors" msgstr "不支持原始矢量大小的改变" #: src/main/connections.c:4703 src/main/connections.c:4707 #: src/main/connections.c:4754 msgid "invalid UTF-8 input in readChar()" msgstr "readChar()的UTF-8输入有错" #: src/main/connections.c:4710 src/main/connections.c:4720 #, fuzzy msgid "truncating string with embedded nuls" msgstr "不允许用\"bytes\"编码进行字符翻译”" #: src/main/connections.c:4821 msgid "can only read in bytes in a non-UTF-8 MBCS locale" msgstr "在non-UTF-8 MBCS语言环境里只能读取字节" #: src/main/connections.c:4827 src/main/connections.c:4948 #, c-format msgid "text connection used with %s(), results may be incorrect" msgstr "" #: src/main/connections.c:4899 msgid "'object' is too short" msgstr "'object'太短" #: src/main/connections.c:4956 msgid "writeChar: more bytes requested than are in the string - will zero-pad" msgstr "writeChar：字符串的长度比需要的字节数目短-用零来补上" #: src/main/connections.c:4981 msgid "writeChar: more characters requested than are in the string - will zero-pad" msgstr "writeChar：字符串的长度比需要的字节数目短-用零来补上" #: src/main/connections.c:5038 msgid "maximum number of pushback lines exceeded" msgstr "超出推回线的最大数量" #: src/main/connections.c:5044 src/main/connections.c:5048 #: src/main/connections.c:5085 src/main/connections.c:5093 msgid "could not allocate space for pushback" msgstr "无法为推回分配空间" #: src/main/connections.c:5076 msgid "can only push back on open readable connections" msgstr "只能推回已打开的可读链结" #: src/main/connections.c:5078 msgid "can only push back on text-mode connections" msgstr "只能推回文字状态的链结" #: src/main/connections.c:5142 src/main/connections.c:5212 msgid "sink stack is full" msgstr "汇集堆叠满了" #: src/main/connections.c:5145 msgid "cannot switch output to stdin" msgstr "无法将输出转到stdin" #: src/main/connections.c:5172 msgid "no sink to remove" msgstr "没有可以除去的汇集" #: src/main/connections.c:5295 msgid "there is no connection NA" msgstr "没有NA链结" #: src/main/connections.c:5297 #, c-format msgid "there is no connection %d" msgstr "没有%d链结" #: src/main/connections.c:5448 #, fuzzy msgid "method = \"wininet\" is only supported on Windows" msgstr "本平台不支持nsl()" #: src/main/connections.c:5515 src/modules/internet/internet.c:225 msgid "the 'internal' method of url() is defunct for http:// and ftp:// URLs" msgstr "" #: src/main/connections.c:5528 msgid "file(\"\") only supports open = \"w+\" and open = \"w+b\": using the former" msgstr "file(\"\")只支持open = \"w+\"和open = \"w+b\"这两种模式：现在使用前者" #: src/main/connections.c:5549 #, c-format msgid "using 'raw = TRUE' because '%s' is a fifo or pipe" msgstr "" #: src/main/connections.c:5556 #, c-format msgid "'raw = FALSE' but '%s' is not a regular file" msgstr "" #: src/main/connections.c:5600 #, fuzzy msgid "URL scheme unsupported by this method" msgstr "本平台不支持ICU" #: src/main/connections.c:5697 msgid "file stream does not have gzip magic number" msgstr "文件串流没有gzip幻数" #: src/main/connections.c:5708 msgid "file stream does not have valid gzip header" msgstr "文件串流的gzip表头有错" #: src/main/connections.c:5773 msgid "writing error whilst flushing 'gzcon' connection" msgstr "清除'gzcon'链结时书写出错" #: src/main/connections.c:5875 #, c-format msgid "crc error %x %x\n" msgstr "crc错误%x%x\n" #: src/main/connections.c:5902 msgid "write error on 'gzcon' connection" msgstr "'gzcon'链结书写出错" #: src/main/connections.c:5937 msgid "'level' must be one of 0 ... 9" msgstr "'level’必需是0 ... 9之一" #: src/main/connections.c:5940 msgid "'allowNonCompression' must be TRUE or FALSE" msgstr "'allowNonCompression'的值要么是TRUE要么是FALSE" #: src/main/connections.c:5943 #, fuzzy msgid "'text' must be TRUE or FALSE" msgstr "'all.x'必需是TRUE或FALSE" #: src/main/connections.c:5946 msgid "this is already a 'gzcon' connection" msgstr "这已经是'gzcon'链结" #: src/main/connections.c:5952 msgid "can only use read- or write- binary connections" msgstr "只用读或写的二进列链结" #: src/main/connections.c:5955 msgid "using a text-mode 'file' connection may not work correctly" msgstr "文字方式的'file'联结有可能会出错" #: src/main/connections.c:5958 msgid "cannot create a 'gzcon' connection from a writable textConnection; maybe use rawConnection" msgstr "不能创建一个可写的textConnection的'gzcon'连接；试用rawConnection一下" #: src/main/connections.c:5961 src/main/connections.c:5965 #: src/main/connections.c:5973 src/main/connections.c:5988 msgid "allocation of 'gzcon' connection failed" msgstr "分配'gzcon'链结失败" #: src/main/connections.c:6177 msgid "not a list of sockets" msgstr "非插坐串列" #: src/main/connections.c:6182 msgid "bad write indicators" msgstr "书写指示器有错" #: src/main/connections.c:6204 #, fuzzy msgid "a server socket connection cannot be writeable" msgstr "无法载入插坐例行程序" #: src/main/connections.c:6206 msgid "not a socket connection" msgstr "非插坐链结" #: src/main/connections.c:6499 msgid "unknown compression, assuming none" msgstr "不知道这种压缩格式，因此假设没有压缩" #: src/main/connections.c:6664 src/main/connections.c:6668 #: src/main/connections.c:6675 #, c-format msgid "allocation of %s connection failed" msgstr "链结%s分配失败" #: src/main/context.c:339 msgid "no loop for break/next, jumping to top level" msgstr "没有可中断/下一步骤的循环, 跳到最高层" #: src/main/context.c:347 msgid "no function to return from, jumping to top level" msgstr "没有可回归的函数, 跳到最高层" #: src/main/context.c:362 msgid "target context is not on the stack" msgstr "目标上下文不在堆叠上" #: src/main/context.c:377 #, fuzzy msgid "NA argument is invalid" msgstr "串列参数的名字不对" #: src/main/context.c:385 src/main/context.c:400 src/main/context.c:483 #: src/main/context.c:495 src/main/context.c:506 src/main/context.c:518 msgid "not that many frames on the stack" msgstr "堆叠上没有这么多的环境框" #: src/main/context.c:417 msgid "only positive values of 'n' are allowed" msgstr "'n'只允许是正数" #: src/main/context.c:556 msgid "number of contexts must be positive" msgstr "上下文数目必需是正数" #: src/main/context.c:569 msgid "no browser context to query" msgstr "询问缺乏浏览器上下文" #: src/main/context.c:587 msgid "not that many calls to browser are active" msgstr "没有么多浏览器得指令" #: src/main/context.c:602 msgid "not that many functions on the call stack" msgstr "堆叠上没有这么多函数" #: src/main/context.c:606 msgid "debug flag in compiled function has no effect" msgstr "" #: src/main/context.c:608 msgid "debug will apply when function leaves compiled code" msgstr "" #: src/main/context.c:699 msgid "internal error in 'do_sys'" msgstr "'do_sys'里发生了内部错误" #: src/main/cum.c:48 msgid "integer overflow in 'cumsum'; use 'cumsum(as.numeric(.))'" msgstr "'cumsum'中整数上溢；请用'cumsum(as.numeric(.))'" #: src/main/cum.c:175 msgid "'cummax' not defined for complex numbers" msgstr "'cummax'不适用于复数" #: src/main/cum.c:178 msgid "'cummin' not defined for complex numbers" msgstr "'cummin'不适用于复数" #: src/main/cum.c:205 src/main/cum.c:232 msgid "unknown cumxxx function" msgstr "没有cumxxx这个功能" #: src/main/datetime.c:552 src/main/datetime.c:560 src/main/datetime.c:574 #: src/main/datetime.c:579 msgid "problem with setting timezone" msgstr "设定时区时出了问题" #: src/main/datetime.c:564 msgid "cannot set timezones on this system" msgstr "无法为本系统设时差区" #: src/main/datetime.c:586 src/main/datetime.c:588 msgid "problem with unsetting timezone" msgstr "取消时区设制时出了问题" #: src/main/datetime.c:809 src/main/datetime.c:812 src/main/datetime.c:912 #: src/main/datetime.c:1272 src/main/datetime.c:1275 #, fuzzy, c-format msgid "zero-length component [[%d]] in non-empty \"POSIXlt\" structure" msgstr "非空的\"POSIXlt\"结构里含长度为零的部件" #: src/main/datetime.c:924 msgid "invalid component [[10]] in \"POSIXlt\" should be 'zone'" msgstr "" #: src/main/datetime.c:927 msgid "More than 9 list components in \"POSIXlt\" without timezone" msgstr "" #: src/main/datetime.c:952 msgid "Timezone specified in the object field cannot be used on this system." msgstr "" #: src/main/dcf.c:112 src/main/dcf.c:187 src/main/dcf.c:268 msgid "could not allocate memory for 'read.dcf'" msgstr "无法为'read.dcf'分配内存" #: src/main/dcf.c:158 #, c-format msgid "Found continuation line starting '%s ...' at begin of record." msgstr "在记录开始的地方'%s ...'不能有连续行" #: src/main/dcf.c:297 #, c-format msgid "Line starting '%s ...' is malformed!" msgstr "畸形'%s ...'开头行!" #: src/main/debug.c:46 src/main/debug.c:76 msgid "argument must be a function" msgstr "参数必需为函数" #: src/main/debug.c:111 #, fuzzy, c-format msgid "Value for '%s' must be TRUE or FALSE" msgstr "'all.x'必需是TRUE或FALSE" #: src/main/debug.c:139 src/main/debug.c:167 src/main/debug.c:242 msgid "argument must not be a function" msgstr "参数不能是函数" #: src/main/debug.c:142 msgid "cannot trace NULL" msgstr "无法跟踪NULL值" #: src/main/debug.c:146 msgid "'tracemem' is not useful for promise and environment objects" msgstr "'tracemem'对允諾和环境对象没有作用" #: src/main/debug.c:149 msgid "'tracemem' is not useful for weak reference or external pointer objects" msgstr "'tracemem'对弱引用或外指针对象没有作用" #: src/main/debug.c:180 src/main/debug.c:187 msgid "R was not compiled with support for memory profiling" msgstr "在编译R程序时没有建立存储轮廓这一功能" #: src/main/deparse.c:175 msgid "invalid 'cutoff' value for 'deparse', using default" msgstr "'deparse'的'cutoff'值不对, 用缺省值" #: src/main/deparse.c:293 msgid "deparse may be incomplete" msgstr "反向分析可能不完全" #: src/main/deparse.c:296 msgid "deparse may be not be source()able in R < 2.7.0" msgstr "在R < 2.7.0的版本里deparse可能不可以被source()" #: src/main/deparse.c:384 src/main/deparse.c:429 src/main/source.c:203 #, fuzzy msgid "'file' must be a character string or connection" msgstr "'what'必需是字符串或函数" #: src/main/deparse.c:408 src/main/deparse.c:504 src/main/deparse.c:510 msgid "wrote too few characters" msgstr "写了的字符数目太小" #: src/main/deparse.c:431 msgid "character arguments expected" msgstr "需要字符参数" #: src/main/deparse.c:434 msgid "zero-length argument" msgstr "参数长度为零" #: src/main/deparse.c:441 msgid "'opts' should be small non-negative integer" msgstr "'opts'必需是小的非负整数" #: src/main/deparse.c:451 src/main/envir.c:2007 src/main/envir.c:2119 #: src/main/envir.c:3815 src/main/eval.c:750 src/main/eval.c:2119 #: src/main/eval.c:5139 src/main/saveload.c:2082 src/main/saveload.c:2417 #: src/main/serialize.c:3128 #, c-format msgid "object '%s' not found" msgstr "找不到对象'%s'" #: src/main/deparse.c:1831 msgid "badly formed function expression" msgstr "函数表达式形式不对" #: src/main/devices.c:44 msgid "the base graphics system is not registered" msgstr "基本图形系统还没有注册" #: src/main/devices.c:166 src/main/devices.c:174 msgid "no active or default device" msgstr "没有在使用中的或缺省的设备" #: src/main/devices.c:176 msgid "no active device and default getOption(\"device\") is invalid" msgstr "" #: src/main/devices.c:390 src/main/devices.c:452 msgid "too many open devices" msgstr "太多已打开的设备" #: src/main/devices.c:493 msgid "not enough memory to allocate device (in GEcreateDevDesc)" msgstr "分配设备内存不够(GEcreateDevDesc)" #: src/main/devices.c:545 msgid "Hit to see next plot: " msgstr "按键来看下一个图: " #: src/main/dotcode.c:127 src/main/dotcode.c:157 msgid "NULL value passed as symbol address" msgstr "NULL值不能当作符号地址用" #: src/main/dotcode.c:148 #, c-format msgid "Unimplemented type %d in createRSymbolObject" msgstr "createRSymbolObject里的种类%d目前没有被实现" #: src/main/dotcode.c:162 src/main/dotcode.c:260 #, c-format msgid "symbol '%s' is too long" msgstr "符号'%s'太长" #: src/main/dotcode.c:174 msgid "first argument must be a string (of length 1) or native symbol reference" msgstr "第一个参数要么是字符串(长度为一)要么是本机符号引用" #: src/main/dotcode.c:224 src/main/dotcode.c:1272 msgid "too many arguments in foreign function call" msgstr "外接函数调用时参数太多" #: src/main/dotcode.c:236 msgid "PACKAGE = \"\" is invalid" msgstr "PACKAGE = \"\"无效" #: src/main/dotcode.c:292 src/main/dotcode.c:297 src/main/dotcode.c:302 #: src/main/dotcode.c:307 #, c-format msgid "\"%s\" not available for %s() for package \"%s\"" msgstr "程序包\"%3$s\"里\"%1$s\"不适用于%2$s()" #: src/main/dotcode.c:312 #, c-format msgid "%s symbol name \"%s\" not in DLL for package \"%s\"" msgstr "程序包'%3$s'的DLL没有\"%1$s\"字符名\"%2$s\" " #: src/main/dotcode.c:317 #, c-format msgid "%s symbol name \"%s\" not in load table" msgstr "载入表里没有\"%1$s\"字符名\"%2$s\"" #: src/main/dotcode.c:368 src/main/dotcode.c:370 src/main/dotcode.c:380 #: src/main/dotcode.c:445 src/main/dotcode.c:452 #, c-format msgid "'%s' used more than once" msgstr "'%s'只能用一次" #: src/main/dotcode.c:376 msgid "DLL name is too long" msgstr "DLL的名字值太长" #: src/main/dotcode.c:421 msgid "PACKAGE argument must be a single character string" msgstr "PACKAGE参数必需是单个字符串" #: src/main/dotcode.c:427 msgid "PACKAGE argument is too long" msgstr "PACKAGE参数值太长" #: src/main/dotcode.c:492 msgid "no arguments supplied" msgstr "没有提供参数" #: src/main/dotcode.c:493 src/main/seq.c:1043 msgid "too many arguments" msgstr "参数太多" #: src/main/dotcode.c:554 src/main/dotcode.c:1264 src/main/dotcode.c:1519 msgid "'.NAME' is missing" msgstr "缺少'.NAME'" #: src/main/dotcode.c:563 src/main/dotcode.c:1279 src/main/dotcode.c:1540 #, c-format msgid "Incorrect number of arguments (%d), expecting %d for '%s'" msgstr "参数数目不对(%1$d), ‘%3$s’只需要%2$d个参数" #: src/main/dotcode.c:1247 src/main/dotcode.c:2390 msgid "too many arguments, sorry" msgstr "对不起，参数太多" #: src/main/dotcode.c:1367 src/main/dotcode.c:1398 src/main/engine.c:3270 msgid "invalid graphics state" msgstr "图形狀態不对" #: src/main/dotcode.c:1480 msgid "NULL value for DLLInfoReference when looking for DLL" msgstr "寻找DLL时DLLInfoReference的值是NULL" #: src/main/dotcode.c:1579 #, c-format msgid "wrong type for argument %d in call to %s" msgstr "调用%2$s时参数%1$d的种类不对" #: src/main/dotcode.c:1608 #, c-format msgid "long vectors (argument %d) are not supported in %s" msgstr "%2$s里不支持长向量（参数%1$d）" #: src/main/dotcode.c:1639 #, c-format msgid "NAs in foreign function call (arg %d)" msgstr "外接函数调用时不能有NA(arg%d)" #: src/main/dotcode.c:1662 #, c-format msgid "NA/NaN/Inf in foreign function call (arg %d)" msgstr "外接函数调用时不能有NA/NaN/Inf(arg%d)" #: src/main/dotcode.c:1692 #, c-format msgid "complex NA/NaN/Inf in foreign function call (arg %d)" msgstr "外接函数调用时不能有复数的NA/NaN/Inf(arg%d)" #: src/main/dotcode.c:1759 src/main/dotcode.c:1775 src/main/dotcode.c:1786 #, c-format msgid "invalid mode (%s) to pass to Fortran (arg %d)" msgstr "传给Fortran(arg%2$d)的状态(%1$s)出错" #: src/main/dotcode.c:1780 #, c-format msgid "invalid mode (%s) to pass to C or Fortran (arg %d)" msgstr "传给C或Fortran(arg%2$d)的状态(%1$s)出错" #: src/main/dotcode.c:1791 msgid "pairlists are passed as SEXP as from R 2.15.0" msgstr "从R版本2.15.0之后pairlists作为SEXP来用" #: src/main/dotcode.c:2606 #, c-format msgid "type \"%s\" not supported in interlanguage calls" msgstr "不同语言调用不支持这一种类\"%s\"" #: src/main/dotcode.c:2711 #, c-format msgid "mode '%s' is not supported in call_R" msgstr "call_R不支持'%s'状态" #: src/main/dounzip.c:172 #, c-format msgid " not overwriting file '%s" msgstr "无法覆盖'%s'文件" #: src/main/dounzip.c:262 #, c-format msgid "zip file '%s' cannot be opened" msgstr "无法打开'%s'文件" #: src/main/dounzip.c:324 msgid "invalid zip name argument" msgstr "zip名字参数不对" #: src/main/dounzip.c:327 src/main/dounzip.c:419 msgid "zip path is too long" msgstr "zip路径太长" #: src/main/dounzip.c:344 msgid "'exdir' is too long" msgstr "'exdir'太长" #: src/main/dounzip.c:347 msgid "'exdir' does not exist" msgstr "'exdir'不存在" #: src/main/dounzip.c:372 msgid "requested file not found in the zip file" msgstr "你所要求的文件在zip文件中没有" #: src/main/dounzip.c:375 msgid "zip file is corrupt" msgstr "zip文件有损坏" #: src/main/dounzip.c:378 msgid "CRC error in zip file" msgstr "zip文件出了CRC错误" #: src/main/dounzip.c:385 msgid "write error in extracting from zip file" msgstr "抽取zip文件时出现了书写错误" #: src/main/dounzip.c:388 #, c-format msgid "error %d in extracting from zip file" msgstr "从zip文件中抽取%d时出了错" #: src/main/dounzip.c:414 msgid "unz connections can only be opened for reading" msgstr "unz链结只可读不可写" #: src/main/dounzip.c:425 msgid "invalid description of 'unz' connection" msgstr "'unz'链结的描述不对" #: src/main/dounzip.c:431 #, c-format msgid "cannot open zip file '%s'" msgstr "无法打开zip文件'%s'" #: src/main/dounzip.c:435 #, c-format msgid "cannot locate file '%s' in zip file '%s'" msgstr "在zip文件'%2$s'里找不到%1$s这个文件" #: src/main/dounzip.c:480 msgid "printing not enabled for this connection" msgstr "此链结无法打印" #: src/main/dounzip.c:486 msgid "write not enabled for this connection" msgstr "无法对这个链结书写" #: src/main/dounzip.c:504 src/main/dounzip.c:508 src/main/dounzip.c:515 #: src/main/dounzip.c:533 msgid "allocation of 'unz' connection failed" msgstr "分配'unz'链结失败" #: src/main/dstruct.c:90 msgid "invalid formal arguments for 'function'" msgstr "’function’的正式参数不对" #: src/main/dstruct.c:100 msgid "invalid body argument for 'function'" msgstr "’function’的函数体定义不对" #: src/main/edit.c:111 msgid "invalid argument to edit()" msgstr "edit()参数不对" #: src/main/edit.c:122 src/main/saveload.c:2180 msgid "unable to open file" msgstr "无法打开文件" #: src/main/edit.c:135 msgid "argument 'editor' type not valid" msgstr "参数'editor'的种类不对" #: src/main/edit.c:137 msgid "argument 'editor' is not set" msgstr "参数'editor'还没有被设定" #: src/main/edit.c:142 msgid "'title' must be a string" msgstr "'title'必需是字符串" #: src/main/edit.c:160 #, c-format msgid "unable to run editor '%s'" msgstr "无法启动编辑器'%s'" #: src/main/edit.c:162 msgid "editor ran but returned error status" msgstr "启动了编辑器但回覆错误状态" #: src/main/edit.c:172 #, c-format msgid "problem with running editor %s" msgstr "启动编辑器%s时出了问题" #: src/main/edit.c:190 msgid "unable to open file to read" msgstr "无法打开文件来读取数据" #: src/main/edit.c:197 #, c-format msgid "" "%s occurred on line %d\n" " use a command like\n" " x <- edit()\n" " to recover" msgstr "%s错误出现在%d行上，请用类似于x <- edit()的指令来回到原来状态" #: src/main/engine.c:41 msgid "Graphics API version mismatch" msgstr "图形API版本不相符" #: src/main/engine.c:114 src/main/engine.c:119 src/main/engine.c:183 msgid "unable to allocate memory (in GEregister)" msgstr "无法分配内存(GEregister)" #: src/main/engine.c:154 msgid "too many graphics systems registered" msgstr "注册了太多的图形系统" #: src/main/engine.c:207 msgid "no graphics system to unregister" msgstr "没有可以取消注册的图形系统" #: src/main/engine.c:444 src/main/engine.c:449 src/main/engine.c:457 #: src/main/engine.c:464 src/main/engine.c:478 src/modules/X11/devX11.c:1166 msgid "invalid line end" msgstr "行终点出错" #: src/main/engine.c:509 src/main/engine.c:514 src/main/engine.c:522 #: src/main/engine.c:529 src/main/engine.c:543 src/modules/X11/devX11.c:1184 msgid "invalid line join" msgstr "行接合出错" #: src/main/engine.c:775 src/main/engine.c:884 src/main/engine.c:1230 #: src/main/engine.c:1340 src/main/engine.c:1452 src/main/engine.c:1506 msgid "'lwd' must be non-negative and finite" msgstr "'lwd'必需是正整数" #: src/main/engine.c:817 msgid "out of memory while clipping polyline" msgstr "剪裁多重线的时候内存不够" #: src/main/engine.c:1113 msgid "Clipping polygon that does not need clipping" msgstr "" #: src/main/engine.c:1500 msgid "path rendering is not implemented for this device" msgstr "没有为这个设备实现路径呈现这个功能" #: src/main/engine.c:1520 msgid "Invalid graphics path" msgstr "图形路径出错" #: src/main/engine.c:1539 msgid "raster rendering is not implemented for this device" msgstr "没有为这个设备实现光栅渲染这一功能" #: src/main/engine.c:1563 msgid "raster capture is not available for this device" msgstr "栅格捕捉不适用于这个设备" #: src/main/engine.c:1782 #, c-format msgid "font face %d not supported for font family '%s'" msgstr "模面%1$d不支持字模家族'%2$s'" #: src/main/engine.c:2102 msgid "no graphics device is active" msgstr "没有活动图形设备" #: src/main/engine.c:2179 #, c-format msgid "pch value '%d' is invalid in this locale" msgstr "'%d'这个pch值在本语言环境下不适用" #: src/main/engine.c:2437 #, c-format msgid "unimplemented pch value '%d'" msgstr "目前没有实现pch '%d'这样一个值" #: src/main/engine.c:2454 #, c-format msgid "invalid axis extents [GEPretty(.,.,n=%d)" msgstr "座标范围不对[GEPretty(.,.,n=%d)" #: src/main/engine.c:2456 #, fuzzy, c-format msgid "non-finite axis extents [GEPretty(%g,%g, n=%d)]" msgstr "座标范围不能是无限值[GEPretty(%g,%g,%d)]" #: src/main/engine.c:2499 #, fuzzy, c-format msgid " new *lo = %g < %g = x1" msgstr " .. GEPretty(.): new *lo =%g <%g = x1" #: src/main/engine.c:2501 #, fuzzy, c-format msgid " new *up = %g > %g = x2" msgstr " .. GEPretty(.): new *up =%g >%g = x2" #: src/main/engine.c:3021 msgid "display list redraw incomplete" msgstr "显示串列没有完全被刷新" #: src/main/engine.c:3025 #, fuzzy msgid "invalid display list" msgstr "参数串列不对" #: src/main/engine.c:3137 #, c-format msgid "snapshot recorded with different graphics engine version (pre 11 - this is version %d)" msgstr "" #: src/main/engine.c:3141 #, c-format msgid "snapshot recorded with different graphics engine version (%d - this is version %d)" msgstr "" #: src/main/engine.c:3230 msgid "'expr' argument must be an expression" msgstr "'expr'参数必需是表达式" #: src/main/engine.c:3232 msgid "'list' argument must be a list" msgstr "'list'参数必需是串列" #: src/main/engine.c:3238 msgid "'env' argument must be an environment" msgstr "'env'参数必需是环境" #: src/main/engine.c:3337 src/main/engine.c:3345 msgid "invalid multibyte char in pch=\"c\"" msgstr "pch=\"c\"里的多字节字元不对" #: src/main/engine.c:3392 msgid "invalid hex digit in 'color' or 'lty'" msgstr "十六进制'color'设定或lty设定不对" #: src/main/engine.c:3415 msgid "invalid line type: must be length 2, 4, 6 or 8" msgstr "行类不对: 长度必需是2, 4, 6或8" #: src/main/engine.c:3419 msgid "invalid line type: zeroes are not allowed" msgstr "排类别不对：不能有零值" #: src/main/engine.c:3428 src/main/engine.c:3436 src/main/engine.c:3443 msgid "invalid line type" msgstr "行类不对" #: src/main/engine.c:3790 msgid "Stroke ignored (device is appending path)" msgstr "" #: src/main/engine.c:3802 msgid "Fill ignored (device is appending path)" msgstr "" #: src/main/engine.c:3814 msgid "FillStroke ignored (device is appending path)" msgstr "" #: src/main/envir.c:130 src/main/envir.c:144 #, c-format msgid "cannot change value of locked binding for '%s'" msgstr "无法改变被锁定的联编'%s'的值" #: src/main/envir.c:267 src/main/envir.c:1648 msgid "cannot add bindings to a locked environment" msgstr "无法为被锁定的环境添加联编" #: src/main/envir.c:836 msgid "cannot unbind in the base namespace" msgstr "无法在基本名字空间里切断联编" #: src/main/envir.c:838 msgid "unbind in the base environment is unimplemented" msgstr "在基本环境里切断联编这功能还没有被实现" #: src/main/envir.c:840 src/main/envir.c:1936 src/main/envir.c:3592 msgid "cannot remove bindings from a locked environment" msgstr "无法从锁定的环境中删除联编" #: src/main/envir.c:1227 src/main/envir.c:1260 src/main/envir.c:2020 #, c-format msgid "argument to '%s' is not an environment" msgstr "参数'%s'不是环境" #: src/main/envir.c:1418 #, c-format msgid "indexing '...' with non-positive index %d" msgstr "" #: src/main/envir.c:1427 #, fuzzy, c-format msgid "the ... list contains fewer than %d element" msgid_plural "the ... list contains fewer than %d elements" msgstr[0] "... 串列不包含%d元素" #: src/main/envir.c:1431 #, c-format msgid "..%d used in an incorrect context, no ... to look in" msgstr "..%d所在的上下文出了错, 没有可以搜索的..." #: src/main/envir.c:1450 msgid "indexing '...' with an invalid index" msgstr "" #: src/main/envir.c:1460 src/main/envir.c:1471 #, fuzzy msgid "incorrect context: the current call has no '...' to look in" msgstr "..%d所在的上下文出了错, 没有可以搜索的..." #: src/main/envir.c:1580 #, c-format msgid "could not find function \"%s\"" msgstr "没有\"%s\"这个函数" #: src/main/envir.c:1610 msgid "cannot assign values in the empty environment" msgstr "无法在空环境里分派数值" #: src/main/envir.c:1616 src/main/envir.c:1746 msgid "cannot assign variables to this database" msgstr "无法给这个数据库指定变数" #: src/main/envir.c:1830 #, c-format msgid "cannot add binding of '%s' to the base environment" msgstr "无法在基本环境里加联编'%s' " #: src/main/envir.c:1859 msgid "only the first element is used as variable name" msgstr "只用了第一个元素作为变数名" #: src/main/envir.c:1891 msgid "first argument must be a named list" msgstr "第一个参数必需是带名字的串列" #: src/main/envir.c:1897 msgid "names(x) must be a character vector of the same length as x" msgstr "name(x)必需是长度与x一样的字符矢量" #: src/main/envir.c:1900 msgid "'envir' argument must be an environment" msgstr "'envir'参数必需是环境" #: src/main/envir.c:1930 msgid "cannot remove variables from base namespace" msgstr "无法从基本名字空间里删除变数" #: src/main/envir.c:1932 msgid "cannot remove variables from the base environment" msgstr "无法从基本环境中删除变数" #: src/main/envir.c:1934 msgid "cannot remove variables from the empty environment" msgstr "无法从空环境中删除变数" #: src/main/envir.c:1942 msgid "cannot remove variables from this database" msgstr "无法从这个数据库中删除变数" #: src/main/envir.c:2023 src/main/envir.c:3351 src/main/envir.c:3372 #: src/main/envir.c:3393 src/main/envir.c:3430 src/main/envir.c:3451 #: src/main/envir.c:3498 src/main/envir.c:3588 msgid "not a symbol" msgstr "不是符号" #: src/main/envir.c:2062 #, fuzzy msgid "first argument has length > 1" msgstr "参数长度为零" #: src/main/envir.c:2121 #, c-format msgid "object '%s' of mode '%s' was not found" msgstr "没有状态为\"%2$s\"的\"%1$s\"目标对象" #: src/main/envir.c:2203 #, c-format msgid "invalid name in position %d" msgstr "在%d位置的名字不对" #: src/main/envir.c:2209 msgid "second argument must be an environment" msgstr "第二参数必需是环境" #: src/main/envir.c:2362 msgid "invalid use of 'missing'" msgstr "’missing'的用法不对" #: src/main/envir.c:2390 msgid "'missing' can only be used for arguments" msgstr "'missing'只能用于这些参数" #: src/main/envir.c:2476 msgid "'pos' must be an integer" msgstr "'pos'的值必需是整数" #: src/main/envir.c:2490 msgid "all elements of a list must be named" msgstr "所有的串列都必需带名字" #: src/main/envir.c:2513 msgid "'attach' only works for lists, data frames and environments" msgstr "'attach'只适用于串列，数据框和环境" #: src/main/envir.c:2596 msgid "detaching \"package:base\" is not allowed" msgstr "\"package:base\"不能被拆离" #: src/main/envir.c:2941 src/main/envir.c:3023 msgid "argument must be an environment" msgstr "参数必需是环境" #: src/main/envir.c:3027 msgid "arguments must be symbolic" msgstr "参数必需为符号" #: src/main/envir.c:3172 msgid "no enclosing environment" msgstr "没有封闭环境" #: src/main/envir.c:3229 #, c-format msgid "no item called \"%s\" on the search list" msgstr "寻找串列里没有\"%s\"这样一个项目" #: src/main/envir.c:3255 msgid "using 'as.environment(NULL)' is defunct" msgstr "'as.environment(NULL)'不再有用" #: src/main/envir.c:3261 msgid "S4 object does not extend class \"environment\"" msgstr "替换对象不是环境" #: src/main/envir.c:3276 msgid "invalid object for 'as.environment'" msgstr "as.environment的对象不对" #: src/main/envir.c:3299 src/main/envir.c:3327 src/main/envir.c:3356 #: src/main/envir.c:3377 src/main/envir.c:3400 src/main/envir.c:3435 #: src/main/envir.c:3456 src/main/envir.c:3503 msgid "not an environment" msgstr "不是环境" #: src/main/envir.c:3364 src/main/envir.c:3385 src/main/envir.c:3443 #: src/main/envir.c:3464 src/main/envir.c:3507 src/main/envir.c:3516 #, c-format msgid "no binding for \"%s\"" msgstr "\"%s\"没有联编" #: src/main/envir.c:3395 msgid "not a function" msgstr "不是函数" #: src/main/envir.c:3403 src/main/envir.c:3419 msgid "symbol already has a regular binding" msgstr "符号已经有了正式联编" #: src/main/envir.c:3405 src/main/envir.c:3421 msgid "cannot change active binding if binding is locked" msgstr "无法改变被锁定的联编" #: src/main/envir.c:3509 src/main/envir.c:3518 #, fuzzy, c-format msgid "no active binding for \"%s\"" msgstr "\"%s\"没有联编" #: src/main/envir.c:3538 src/main/envir.c:3800 msgid "unknown op" msgstr "没有这种运算符" #: src/main/envir.c:3594 msgid "cannot unbind a locked binding" msgstr "无法切斷已经锁定了的联编" #: src/main/envir.c:3596 msgid "cannot unbind an active binding" msgstr "无法切斷正在使用中的联编" #: src/main/envir.c:3750 msgid "bad namespace name" msgstr "名字空间名字不对" #: src/main/envir.c:3762 msgid "namespace already registered" msgstr "名字空间已经注册了" #: src/main/envir.c:3774 msgid "namespace not registered" msgstr "名字空间没有注册" #: src/main/envir.c:3835 #, fuzzy msgid "bad variable name" msgstr "变数名字不对" #: src/main/envir.c:3877 #, fuzzy msgid "bad namespace" msgstr "名字空间名字不对" #: src/main/envir.c:3913 #, c-format msgid "'%s' is not an exported object from 'namespace:%s'" msgstr "" #: src/main/envir.c:3962 msgid "bad import environment argument" msgstr "引进环境参数不对" #: src/main/envir.c:3967 msgid "bad export environment argument" msgstr "引出环境参数不对" #: src/main/envir.c:3971 msgid "length of import and export names must match" msgstr "引进和引出名字的长度必需相等" #: src/main/envir.c:3994 #, c-format msgid "exported symbol '%s' has no value" msgstr "引出的符号’%s'没有值" #: src/main/envir.c:4160 #, c-format msgid "unknown encoding: %d" msgstr "不支持'%d'这个编码" #: src/main/envir.c:4180 #, c-format msgid "embedded nul in string: '%s'" msgstr "字符串里嵌入了nul：'%s'" #: src/main/errors.c:208 src/main/errors.c:245 msgid "interrupts suspended; signal ignored" msgstr "暫停中断; 略过信号" #: src/main/errors.c:363 msgid "[... truncated]" msgstr "" #: src/main/errors.c:450 msgid "invalid option \"warning.expression\"" msgstr "\"warning.expression\"选项不对" #: src/main/errors.c:480 #, c-format msgid "(converted from warning) %s" msgstr "(由警告转换成)%s" #: src/main/errors.c:491 #, fuzzy msgid "Warning:" msgstr "警告: %s\n" #: src/main/errors.c:493 #, fuzzy, c-format msgid "Warning in %s :" msgstr "%s里有警告: %s\n" #: src/main/errors.c:502 src/main/errors.c:517 src/main/errors.c:864 msgid "Calls:" msgstr "" #: src/main/errors.c:564 src/main/errors.c:583 src/main/errors.c:760 msgid "Lost warning messages\n" msgstr "警告信息丢失\n" #: src/main/errors.c:595 #, fuzzy msgid "Warning message:" msgid_plural "Warning messages:" msgstr[0] "警告信息：\n" #: src/main/errors.c:605 src/main/errors.c:633 #, c-format msgid "In %s :" msgstr "" #: src/main/errors.c:658 #, fuzzy, c-format msgid "There was %d warning (use warnings() to see it)" msgid_plural "There were %d warnings (use warnings() to see them)" msgstr[0] "共有%d个警告 (用warnings()来显示)\n" #: src/main/errors.c:663 #, fuzzy, c-format msgid "There were %d or more warnings (use warnings() to see the first %d)" msgstr "警告多于%d个(用warnings()来显示第一个到第%d个)\n" #: src/main/errors.c:751 msgid "Error during wrapup: " msgstr "收捲时出错: " #: src/main/errors.c:762 msgid "Error: no more error handlers available (recursive errors?); invoking 'abort' restart\n" msgstr "" #: src/main/errors.c:781 msgid "Error in " msgstr "错误于" #: src/main/errors.c:803 src/main/errors.c:810 #, fuzzy, c-format msgid "Error in %s (from %s) : " msgstr " (从%s) : " #: src/main/errors.c:812 #, fuzzy, c-format msgid "Error in %s : " msgstr "错误于" #: src/main/errors.c:835 src/main/errors.c:841 msgid "Error: " msgstr "错误: " #: src/main/errors.c:877 src/main/errors.c:1518 msgid "In addition: " msgstr "此外: " #: src/main/errors.c:1013 msgid "invalid option \"error\"\n" msgstr "选项\"error\"不对\n" #: src/main/errors.c:1259 src/main/errors.c:1261 src/main/options.c:406 #: src/main/unique.c:2063 #, fuzzy, c-format msgid "'%s' must be a character string" msgstr "'sep'必需是字符串" #: src/main/errors.c:1331 msgid " [invalid string in stop(.)]" msgstr " [stop(.)里的字符串不对]" #: src/main/errors.c:1363 msgid " [invalid string in warning(.)]" msgstr " [warning(.)里的字符串不对]" #: src/main/errors.c:1379 #, c-format msgid "incorrect number of arguments to \"%s\"" msgstr "\"%s\"里的参数数目不对" #: src/main/errors.c:1385 src/main/errors.c:1400 #, c-format msgid "unimplemented feature in %s" msgstr "%s里的功能目前没有实现" #: src/main/errors.c:1394 msgid "invalid number of arguments" msgstr "参数数目不对" #: src/main/errors.c:1395 src/main/logic.c:189 msgid "invalid argument type" msgstr "参数种类不对" #: src/main/errors.c:1397 msgid "time-series/vector length mismatch" msgstr "时间系列/矢量长度不等" #: src/main/errors.c:1398 msgid "incompatible arguments" msgstr "不可兼容的参数" #: src/main/errors.c:1401 msgid "unknown error (report this!)" msgstr "不知是什么错误(请报告!)" #: src/main/errors.c:1410 msgid "inaccurate integer conversion in coercion" msgstr "强制改变整数不精确" #: src/main/errors.c:1413 msgid "unknown warning (report this!)" msgstr "不知是什么警告(请报告!)" #: src/main/errors.c:1488 msgid "No function to return from, jumping to top level" msgstr "没有可回归的函数, 跳到最高层" #: src/main/errors.c:1504 msgid "top level inconsistency?" msgstr "最高层不一致？" #: src/main/errors.c:1760 msgid "bad handler data" msgstr "处理器数据有错" #: src/main/errors.c:1918 msgid "error message not a string" msgstr "错误信息不是字符串" #: src/main/errors.c:2000 msgid "handler or restart stack mismatch in old restart" msgstr "旧重新启动里的处理器或重新启动堆叠不相配" #: src/main/errors.c:2023 src/main/errors.c:2036 msgid "bad error message" msgstr "错误信息不对" #: src/main/errors.c:2077 msgid "bad restart" msgstr "重新启动出错" #: src/main/errors.c:2109 msgid "restart not on stack" msgstr "不能在堆叠上重新启动" #: src/main/errors.c:2125 msgid "not in a try context" msgstr "不在try的上下文中" #: src/main/errors.c:2138 msgid "error message must be a character string" msgstr "错误信息必需是字符串" #: src/main/errors.c:2627 #, fuzzy msgid "condition object must be a VECSXP of length at least one" msgstr "'mode'的长度至少需要是一" #: src/main/errors.c:2630 #, fuzzy msgid "first element of condition object must be a scalar string" msgstr "字符串类别的替换对象不对" #: src/main/eval.c:393 #, c-format msgid "source files skipped by Rprof; please increase '%s'" msgstr "源文件跳过Rprof，请增加“%s”" #: src/main/eval.c:414 #, c-format msgid "Rprof: cannot open profile file '%s'" msgstr "Rprof: 无法打开程序概要分析文件'%s'" #: src/main/eval.c:528 msgid "R profiling is not available on this system" msgstr "本系统没有R程序概要分析这个功能" #: src/main/eval.c:552 msgid "promise already under evaluation: recursive default argument reference or earlier problems?" msgstr "已经在评估：递归缺省参数参考还是早先原来的问题？" #: src/main/eval.c:557 msgid "restarting interrupted promise evaluation" msgstr "重新评估被中断的许诺" #: src/main/eval.c:725 msgid "evaluation nested too deeply: infinite recursion / options(expressions=)?" msgstr "评估嵌套太深：无穷递归/ options(expressions=)?" #: src/main/eval.c:756 src/main/eval.c:5131 msgid "argument is missing, with no default" msgstr "缺少参数, 也没有缺省值" #: src/main/eval.c:870 src/main/eval.c:1985 src/main/eval.c:6994 msgid "attempt to apply non-function" msgstr "不适用于非函数" #: src/main/eval.c:894 #, c-format msgid "%s at %s#%d: " msgstr "%s在%s#%d: " #: src/main/eval.c:1973 src/main/eval.c:3062 #, c-format msgid "argument %d is empty" msgstr "%d元素是空的" #: src/main/eval.c:2029 #, c-format msgid "could not find symbol \"%s\" in environment of the generic function" msgstr "类属函数环境里没有这个\"%s\"符号" #: src/main/eval.c:2047 #, c-format msgid "symbol \"%s\" not in environment of method" msgstr "方法环境里没有\"%s\"这个符号" #: src/main/eval.c:2188 msgid "the condition has length > 1" msgstr "" #: src/main/eval.c:2189 msgid "the condition has length > 1 and only the first element will be used" msgstr "条件的长度大于一，因此只能用其第一元素" #: src/main/eval.c:2209 msgid "missing value where TRUE/FALSE needed" msgstr "需要TRUE/FALSE值的地方不可以用缺少值" #: src/main/eval.c:2210 msgid "argument is not interpretable as logical" msgstr "参数不能作为逻辑值来用" #: src/main/eval.c:2211 msgid "argument is of length zero" msgstr "参数长度为零" #: src/main/eval.c:2309 msgid "non-symbol loop variable" msgstr "非符号循环变数" #: src/main/eval.c:2402 src/main/eval.c:6694 msgid "invalid for() loop sequence" msgstr "for()循环顺序不对" #: src/main/eval.c:2551 msgid "multi-argument returns are not permitted" msgstr "不允许多参数回覆值" #: src/main/eval.c:2599 msgid "invalid (NULL) left side of assignment" msgstr "赋值公式左手不能是(NULL)值" #: src/main/eval.c:2640 msgid "target of assignment expands to non-language object" msgstr "赋值目标擴充到非语言对象" #: src/main/eval.c:2725 #, c-format msgid "overlong name in '%s'" msgstr "'%s'中的名字太长" #: src/main/eval.c:2851 msgid "cannot do complex assignments in base namespace" msgstr "无法在基本名字空间里赋复数值" #: src/main/eval.c:2853 msgid "cannot do complex assignments in base environment" msgstr "无法在基本环境里赋复数值" #: src/main/eval.c:2896 src/main/eval.c:2923 msgid "invalid function in complex assignment" msgstr "复数赋值里的函数不对" #: src/main/eval.c:2994 msgid "invalid (do_set) left-hand side to assignment" msgstr "(do_set)赋值公式左手不对" #: src/main/eval.c:3076 #, c-format msgid "'%s' is missing" msgstr "缺少'%s'" #: src/main/eval.c:3251 msgid "invalid formal argument list for \"function\"" msgstr "\"function\"正式参数串列不对" #: src/main/eval.c:3309 src/main/eval.c:3340 src/main/eval.c:3345 #, c-format msgid "invalid '%s' argument of type '%s'" msgstr "种类'%2$s'的参数'%1$s'不对" #: src/main/eval.c:3337 msgid "numeric 'envir' arg not of length one" msgstr "数值'envir'参数的长度不是一" #: src/main/eval.c:3362 src/main/eval.c:3386 msgid "restarts not supported in 'eval'" msgstr "'eval'不支持重新启动" #: src/main/eval.c:3445 src/main/eval.c:3458 msgid "'Recall' called from outside a closure" msgstr "'Recall'在封閉包外调用" #: src/main/eval.c:3552 msgid "value in '...' is not a promise" msgstr "'... '里的值不是允諾" #: src/main/eval.c:3821 #, c-format msgid "Incompatible methods (\"%s\", \"%s\") for \"%s\"" msgstr "不可兼容的方法(\"%s\", \"%s\")和\"%s\"" #: src/main/eval.c:3871 msgid "dispatch error in group dispatch" msgstr "组分派错误" #: src/main/eval.c:4368 #, c-format msgid "\"%s\" is not a %s function" msgstr "\"%s\"不是%s函数" #: src/main/eval.c:4896 msgid "node stack overflow" msgstr "节点堆叠上溢" #: src/main/eval.c:4984 msgid "bad opcode" msgstr "opcode不对" #: src/main/eval.c:6086 #, c-format msgid "invalid %s type in 'x %s y'" msgstr "'x %2$s y'中%1$s种类不对" #: src/main/eval.c:6522 msgid "bytecode version mismatch; using eval" msgstr "位元組碼版本不配; 用eval" #: src/main/eval.c:6528 msgid "bytecode version is too old" msgstr "位元組碼版本太旧" #: src/main/eval.c:6529 msgid "bytecode version is too new" msgstr "位元組碼版本太新" #: src/main/eval.c:6574 msgid "byte code version mismatch" msgstr "位元組碼版本不配" #: src/main/eval.c:6827 msgid "invalid sequence argument in for loop" msgstr "循环里的顺序参数不对" #: src/main/eval.c:6983 src/main/names.c:1358 #, c-format msgid "there is no .Internal function '%s'" msgstr "没有'%s'这个内部函数" #: src/main/eval.c:7101 src/main/eval.c:7526 src/main/eval.c:7570 msgid "bad function" msgstr "函数不对" #: src/main/eval.c:7114 msgid "not a BUILTIN function" msgstr "非BUILTIN函数" #: src/main/eval.c:7628 #, fuzzy msgid "bad numeric 'switch' offsets" msgstr "数字开关偏移设定不对" #: src/main/eval.c:7634 msgid "numeric EXPR required for 'switch' without named alternatives" msgstr "没有名字替代的'switch'需要数值EXPR" #: src/main/eval.c:7638 #, fuzzy msgid "bad character 'switch' offsets" msgstr "字符开关偏移不对" #: src/main/eval.c:7791 msgid "cannot find index for threaded code address" msgstr "找不到线程代码地址的索引" #: src/main/eval.c:8065 msgid "invalid body" msgstr "函数体不对" #: src/main/eval.c:8085 msgid "invalid symbol" msgstr "符号不对" #: src/main/eval.c:8129 msgid "argument is not a byte code object" msgstr "参数不是位元组码对象" #: src/main/eval.c:8200 src/main/eval.c:8219 src/main/eval.c:8253 msgid "constant buffer must be a generic vector" msgstr "常量缓冲区必须是矢量类属" #: src/main/eval.c:8255 msgid "bad constant count" msgstr "常量数目不对" #: src/main/eval.c:8293 msgid "profile timer in use" msgstr "程序概要分析计时器在运行中" #: src/main/eval.c:8295 msgid "already byte code profiling" msgstr "已经在进行位元组码程序概要分析" #: src/main/eval.c:8315 msgid "setting profile timer failed" msgstr "程序概要分析计时器设制失败" #: src/main/eval.c:8333 msgid "not byte code profiling" msgstr "非位元组码程序概要分析" #: src/main/eval.c:8349 src/main/eval.c:8353 src/main/eval.c:8357 #, fuzzy msgid "byte code profiling is not supported in this build" msgstr "本平台不支持ICU" #: src/main/gevents.c:45 #, c-format msgid "'%s' events not supported in this device" msgstr "本平台不支持'%s'事件" #: src/main/gevents.c:69 msgid "internal error" msgstr "内部错误" #: src/main/gevents.c:76 msgid "this graphics device does not support event handling" msgstr "图形设备不支持事件处理" #: src/main/gevents.c:142 msgid "invalid prompt" msgstr "提示不对" #: src/main/gevents.c:153 msgid "recursive use of 'getGraphicsEvent' not supported" msgstr "不支持'getGraphicsEvent'的递归应用" #: src/main/gevents.c:164 msgid "no graphics event handlers set" msgstr "还没有设定图形事件处理机" #: src/main/gram.y:299 src/main/gram.y:316 src/main/gram.y:2604 #: src/main/gram.y:2619 #, c-format msgid "EOF whilst reading MBCS char at line %d" msgstr "%d行读MBCS字节时遇到EOF" #: src/main/gram.y:305 src/main/gram.y:313 src/main/gram.y:632 #: src/main/gram.y:639 src/main/gram.y:715 src/main/gram.y:2609 #: src/main/gram.y:2616 #, c-format msgid "invalid multibyte character in parser at line %d" msgstr "句法分析器%d行里不能有多字节字符" #: src/main/gram.y:551 #, c-format msgid "input buffer overflow at line %d" msgstr "%d行输入缓冲区上溢" #: src/main/gram.y:1180 msgid "The pipe operator requires a function call as RHS" msgstr "" #: src/main/gram.y:1199 #, fuzzy msgid "RHS variable must be a symbol" msgstr "参数必需为符号" #: src/main/gram.y:1305 #, c-format msgid "incorrect tag type at line %d" msgstr "%d行的标记种类不对" #: src/main/gram.y:1480 #, fuzzy msgid "allocation of source reference state failed" msgstr "分配插坐链结失败" #: src/main/gram.y:1638 msgid "pipe bind symbol may only appear in pipe expressions" msgstr "" #: src/main/gram.y:1989 msgid "contextstack overflow" msgstr "节点堆叠上溢" #: src/main/gram.y:2244 src/main/gram.y:2250 #, fuzzy, c-format msgid "unexpected input" msgstr "意外的%s" #: src/main/gram.y:2247 src/main/main.c:319 #, fuzzy, c-format msgid "unexpected end of input" msgstr "输入结束" #: src/main/gram.y:2253 #, fuzzy, c-format msgid "unexpected string constant" msgstr "字符常量" #: src/main/gram.y:2256 #, fuzzy, c-format msgid "unexpected numeric constant" msgstr "数值量" #: src/main/gram.y:2259 #, fuzzy, c-format msgid "unexpected symbol" msgstr "意外的%s" #: src/main/gram.y:2262 #, fuzzy, c-format msgid "unexpected assignment" msgstr "意外的%s" #: src/main/gram.y:2265 #, fuzzy, c-format msgid "unexpected end of line" msgstr "行尾" #: src/main/gram.y:2268 src/main/gram.y:2276 #, c-format msgid "unexpected %s" msgstr "意外的%s" #: src/main/gram.y:2288 #, c-format msgid "repeated formal argument '%s' on line %d" msgstr "%2$d行上正式参数'%1$s'有重复" #: src/main/gram.y:2515 #, c-format msgid "integer literal %s contains decimal; using numeric value" msgstr "整数文字%s里有小数点；转用数值" #: src/main/gram.y:2518 #, c-format msgid "non-integer value %s qualified with L; using numeric value" msgstr "同L一起修饰的%s是非整数值; 转用数值" #: src/main/gram.y:2530 #, c-format msgid "integer literal %s contains unnecessary decimal point" msgstr "整数文字%s里含多余的小数点" #: src/main/gram.y:2741 src/main/gram.y:2764 src/main/gram.y:2801 #: src/main/gram.y:2838 #, fuzzy, c-format msgid "nul character not allowed (line %d)" msgstr "句法分析器%d行里不能有多字节字符" #: src/main/gram.y:2757 #, c-format msgid "'\\x' used without hex digits in character string starting \"%s\"" msgstr "由\"%s\"开头的字符串中有'\\x'，它必需同hex数字一起来用" #: src/main/gram.y:2773 #, c-format msgid "\\uxxxx sequences not supported inside backticks (line %d)" msgstr "不支持反引号里\\uxxxx这样的序列(%d行)" #: src/main/gram.y:2788 #, c-format msgid "'\\u' used without hex digits in character string starting \"%s\"" msgstr "由\"%s\"开头的字符串中有'\\u'，它必需同hex数字一起来用" #: src/main/gram.y:2796 #, c-format msgid "invalid \\u{xxxx} sequence (line %d)" msgstr "\\u{xxxx}顺序不对(%d行)" #: src/main/gram.y:2810 #, c-format msgid "\\Uxxxxxxxx sequences not supported inside backticks (line %d)" msgstr "不支持反引号里\\Uxxxxxxxx这样的序列(%d行)" #: src/main/gram.y:2825 #, c-format msgid "'\\U' used without hex digits in character string starting \"%s\"" msgstr "由\"%s\"开头的字符串中有'\\U'，它必需同hex数字一起来用" #: src/main/gram.y:2833 #, c-format msgid "invalid \\U{xxxxxxxx} sequence (line %d)" msgstr "\\U{xxxxxxxx}顺序不对(%d行)" #: src/main/gram.y:2842 #, fuzzy, c-format msgid "invalid \\U{xxxxxxxx} value %6x (line %d)" msgstr "\\U{xxxxxxxx}顺序不对(%d行)" #: src/main/gram.y:2845 #, fuzzy, c-format msgid "invalid \\Uxxxxxxxx value %6x (line %d)" msgstr "\\U{xxxxxxxx}顺序不对(%d行)" #: src/main/gram.y:2893 #, c-format msgid "'\\%c' is an unrecognized escape in character string starting \"%s\"" msgstr "由\"%2$s\"开头的字符串中存在'\\%1$c'，但没有这种逸出号" #: src/main/gram.y:2962 src/main/gram.y:3091 msgid "mixing Unicode and octal/hex escapes in a string is not allowed" msgstr "在字符串中混合Unicode和八进制/十六进制转义是不允许的" #: src/main/gram.y:2966 src/main/gram.y:3095 #, c-format msgid "" "string at line %d containing Unicode escapes not in this locale\n" "is too long (max 10000 chars)" msgstr "" "%d行字符串里包含了不属于目前语言环境的Unicode转义字符\n" "太长了(最多只能有10000个字符)" #: src/main/gram.y:3002 #, c-format msgid "malformed raw string literal at line %d" msgstr "" #: src/main/gram.y:3720 src/main/gram.y:3727 src/main/gram.y:3733 #: src/main/gram.y:3740 #, c-format msgid "contextstack overflow at line %d" msgstr "%d行上下文堆叠上溢" #: src/main/gram.y:3830 #, c-format msgid "internal parser error at line %d" msgstr "%d行里输入缓冲区上溢" #: src/main/graphics.c:95 #, c-format msgid "axis(%d, *): range of values (%5.2g) is small wrt |M| = %7.2g --> not pretty()" msgstr "" #: src/main/grep.c:152 #, fuzzy, c-format msgid "TRE pattern compilation error '%s'" msgstr "" "PCRE模式编缉错误\n" "\t'%s'\n" "\t在'%s'\n" #: src/main/grep.c:153 #, c-format msgid "invalid regular expression '%s', reason '%s'" msgstr "正规表现’%s'不对，原因是'%s'" #: src/main/grep.c:155 #, c-format msgid "invalid regular expression, reason '%s'" msgstr "正规表现不对, 原因是'%s'" #: src/main/grep.c:193 #, c-format msgid "" "PCRE error\n" "\t'%s'\n" "\tfor element %d" msgstr "" #: src/main/grep.c:374 src/main/grep.c:446 #, c-format msgid "" "PCRE pattern compilation error\n" "\t'%s'\n" "\tat '%s'\n" msgstr "" "PCRE模式编缉错误\n" "\t'%s'\n" "\t在'%s'\n" #: src/main/grep.c:376 src/main/grep.c:449 #, c-format msgid "invalid regular expression '%s'" msgstr "正规表现’%s'不对" #: src/main/grep.c:388 #, fuzzy, c-format msgid "" "PCRE JIT compilation error\n" "\t'%s'" msgstr "" "PCRE模式编缉错误\n" "\t'%s'\n" "\t在'%s'\n" #: src/main/grep.c:457 #, c-format msgid "" "PCRE pattern study error\n" "\t'%s'\n" msgstr "" "PCRE模式研究错误\n" "\t'%s'\n" #: src/main/grep.c:554 src/main/grep.c:651 src/main/grep.c:761 #: src/main/grep.c:1278 src/main/grep.c:2067 src/main/grep.c:2979 #, c-format msgid "input string %d is invalid UTF-8" msgstr "输入的字符串%d不是UTF-8" #: src/main/grep.c:628 src/main/grep.c:725 #, c-format msgid "'split' string %d is invalid UTF-8" msgstr "'split'字符串%d不是UTF-8" #: src/main/grep.c:632 src/main/grep.c:729 src/main/grep.c:934 #, c-format msgid "'split' string %d is invalid in this locale" msgstr "在目前的语言环境中'split'字符串%d不是UTF-8" #: src/main/grep.c:1237 src/main/grep.c:2873 msgid "regular expression is invalid UTF-8" msgstr "正规表现不是UTF-8" #: src/main/grep.c:1688 msgid "pattern matches an empty string infinitely, returning first match only" msgstr "模式无限匹配了一个空字符串，因此只返回第一个匹配" #: src/main/grep.c:2011 msgid "'pattern' is invalid UTF-8" msgstr "'pattern'不是UTF-8" #: src/main/grep.c:2013 msgid "'replacement' is invalid UTF-8" msgstr "'replacement'不是UTF-8" #: src/main/grep.c:2017 msgid "'pattern' is invalid in this locale" msgstr "'pattern'在本语言环境下不适用" #: src/main/grep.c:2020 msgid "'replacement' is invalid in this locale" msgstr "'replacement'在本语言环境下不适用" #: src/main/grep.c:2025 msgid "zero-length pattern" msgstr "式样长度为零" #: src/main/grep.c:2178 src/main/grep.c:2199 src/main/grep.c:2248 #: src/main/grep.c:2269 src/main/grep.c:2316 src/main/grep.c:2332 msgid "result string is too long" msgstr "结果字符串太长" #: src/main/grep.c:2894 #, fuzzy, c-format msgid "'pcre2_patterninfo' returned '%d' " msgstr "'pcre_fullinfo'返回了'%d'" #: src/main/grep.c:2911 #, c-format msgid "'pcre_fullinfo' returned '%d' " msgstr "'pcre_fullinfo'返回了'%d'" #: src/main/identical.c:125 msgid "ignoring non-pairlist attributes" msgstr "忽略非pairlist的属性" #: src/main/internet.c:67 msgid "internet routines cannot be accessed in module" msgstr "无法读写模块里的互联网例行程序" #: src/main/internet.c:78 src/main/internet.c:91 src/main/internet.c:104 #: src/main/internet.c:115 src/main/internet.c:126 src/main/internet.c:136 #: src/main/internet.c:259 src/main/internet.c:271 src/main/internet.c:283 #: src/main/internet.c:295 msgid "internet routines cannot be loaded" msgstr "无法载入互联网例行程序" #: src/main/internet.c:150 src/main/internet.c:169 src/main/internet.c:188 #: src/main/internet.c:200 src/main/internet.c:214 src/main/internet.c:234 #: src/main/internet.c:247 msgid "socket routines cannot be loaded" msgstr "无法载入插坐例行程序" #: src/main/internet.c:160 #, fuzzy msgid "maxlen must be non-negative" msgstr "'gap'必需是正整数" #: src/main/internet.c:183 #, fuzzy msgid "attempt to close invalid socket" msgstr "无法设定'comment'属性" #: src/main/lapack.c:39 msgid "LAPACK routines cannot be accessed in module" msgstr "LAPACK例行程序无法使用在模块中" #: src/main/lapack.c:53 msgid "LAPACK routines cannot be loaded" msgstr "无法载入LAPACK例行程序" #: src/main/logic.c:79 msgid "operations are possible only for numeric, logical or complex types" msgstr "此运算只适用于数值，逻辑值或复数值种类" #: src/main/logic.c:276 #, c-format msgid "'%s' operator requires 2 arguments" msgstr "'%s'运算符需要两个参数" #: src/main/logic.c:283 #, c-format msgid "invalid 'x' type in 'x %s y'" msgstr "'x %s y'里的'x'种类不对" #: src/main/logic.c:292 #, c-format msgid "invalid 'y' type in 'x %s y'" msgstr "'x %s y'里的'y'种类不对" #: src/main/logic.c:370 msgid "Unary operator `!' called with two arguments" msgstr "单进列运算`!'不能有两个参数" #: src/main/logic.c:483 #, c-format msgid "coercing argument of type '%s' to logical" msgstr "将种类为'%s'的参数强迫转化为逻辑值" #: src/main/main.c:49 msgid "dummy - do not translate" msgstr "dummy - do not translate" #: src/main/main.c:337 #, fuzzy msgid "error during cleanup\n" msgstr "收捲时出错: " #: src/main/main.c:344 msgid "Execution halted\n" msgstr "停止执行\n" #: src/main/main.c:512 msgid "Error: segfault from C stack overflow\n" msgstr "错误：C堆叠上溢\n" #: src/main/main.c:957 msgid "unable to open the base package\n" msgstr "无法打开基本程序包\n" #: src/main/main.c:1041 #, c-format msgid "unable to restore saved data in %s\n" msgstr "无法復原保存在%s里的数据\n" #: src/main/main.c:1090 msgid "During startup - " msgstr "在启动过程中 - " #: src/main/main.c:1106 #, fuzzy msgid "unable to initialize the JIT\n" msgstr "无法打开文件来读取数据" #: src/main/main.c:1379 msgid "cannot quit from browser" msgstr "无法退出瀏覽器" #: src/main/main.c:1383 msgid "one of \"yes\", \"no\", \"ask\" or \"default\" expected." msgstr "只能用\"yes\", \"no\", \"ask\"或\"default\"中的一个." #: src/main/main.c:1388 msgid "save=\"ask\" in non-interactive use: command-line default will be used" msgstr "save=\"ask\"不能在非交互型状态时使用，改用命令行缺省值" #: src/main/main.c:1396 msgid "unrecognized value of 'save'" msgstr "没有这种'save'值" #: src/main/main.c:1399 msgid "invalid 'status', 0 assumed" msgstr "'status'不对, 假設为零" #: src/main/main.c:1404 msgid "invalid 'runLast', FALSE assumed" msgstr "'runLast'不对, 假設为FALSE" #: src/main/main.c:1435 msgid "cannot allocate space for toplevel callback element" msgstr "无法为最高层回叫元素分配空间" #: src/main/main.c:1513 msgid "negative index passed to R_removeTaskCallbackByIndex" msgstr "R_removeTaskCallbackByIndex不能用负的索引值" #: src/main/main.c:1626 #, c-format msgid "warning messages from top-level task callback '%s'\n" msgstr "最高层任务回叫'%s'时产生了警告信息\n" #: src/main/main.c:1717 msgid "top-level task callback did not return a logical value" msgstr "最高层任务回叫没有回覆逻辑值" #: src/main/mapply.c:84 #, fuzzy msgid "argument 'MoreArgs' of 'mapply' is not a list or pairlist" msgstr "'mapply'的参数'MoreArgs'不是串列" #: src/main/mapply.c:121 msgid "longer argument not a multiple of length of shorter" msgstr "长参数的长度不是短参数的长度的整倍数" #: src/main/match.c:88 msgid "invalid partial string match" msgstr "部分字符串比较不对" #: src/main/match.c:231 src/main/match.c:274 src/main/objects.c:49 #: src/main/objects.c:59 #, c-format msgid "formal argument \"%s\" matched by multiple actual arguments" msgstr "正式参数\"%s\"有多个与之相对应的实际参数" #: src/main/match.c:235 src/main/match.c:271 #, c-format msgid "argument %d matches multiple formal arguments" msgstr "参数%d有多个与之相对应的正式参数" #: src/main/match.c:278 #, c-format msgid "partial argument match of '%s' to '%s'" msgstr "'%s'部分匹配为'%s'" #: src/main/match.c:375 #, c-format msgid "unused argument %s" msgid_plural "unused arguments %s" msgstr[0] "参数没有用%s" #: src/main/memory.c:1373 msgid "can only weakly reference/finalize reference objects" msgstr "只能微弱引用或定局引用对象" #: src/main/memory.c:1407 msgid "finalizer must be a function or NULL" msgstr "定局器必需是函数或NULL" #: src/main/memory.c:1463 src/main/memory.c:1471 src/main/memory.c:1482 msgid "not a weak reference" msgstr "非微弱引用" #: src/main/memory.c:1632 msgid "first argument must be environment or external pointer" msgstr "第一参数必需是环境或外部指针" #: src/main/memory.c:1634 msgid "second argument must be a function" msgstr "第二参数必需是函数" #: src/main/memory.c:1638 msgid "third argument must be 'TRUE' or 'FALSE'" msgstr "第三个的值要么是TRUE要么是FALSE" #: src/main/memory.c:2138 msgid "vector memory exhausted (limit reached?)" msgstr "矢量内存用完了(达到了极限?)" #: src/main/memory.c:2144 msgid "cons memory exhausted (limit reached?)" msgstr "cons内存用完了(达到了极限?)" #: src/main/memory.c:2149 msgid "memory exhausted (limit reached?)" msgstr "内存用完了(达到了极限?)" #: src/main/memory.c:2283 #, c-format msgid "cannot allocate memory block of size %0.f Tb" msgstr "无法分配大小为%0.f Tb的内存块" #: src/main/memory.c:2288 #, c-format msgid "cannot allocate memory block of size %0.1f Gb" msgstr "无法分配大小为%0.1f Gb的内存块" #: src/main/memory.c:2686 msgid "vector is too large" msgstr "矢量设得太大了" #: src/main/memory.c:2688 msgid "negative length vectors are not allowed" msgstr "不能有负长度矢量" #: src/main/memory.c:2714 src/main/memory.c:2726 src/main/memory.c:2738 #: src/main/memory.c:2752 #, c-format msgid "cannot allocate vector of length %d" msgstr "无法分配长度为%d的矢量" #: src/main/memory.c:2773 #, c-format msgid "invalid type/length (%s/%d) in vector allocation" msgstr "矢量分配的种类/长度(%s/%d)不对" #: src/main/memory.c:2860 #, c-format msgid "cannot allocate vector of size %0.1f Gb" msgstr "无法分配大小为%0.1f Gb的矢量" #: src/main/memory.c:2864 #, c-format msgid "cannot allocate vector of size %0.1f Mb" msgstr "无法分配大小为%0.1f Mb的矢量" #: src/main/memory.c:2868 #, c-format msgid "cannot allocate vector of size %0.f Kb" msgstr "无法分配大小为%0.f Kb的矢量" #: src/main/memory.c:3324 msgid "protect(): protection stack overflow" msgstr "protect()：防护堆叠上溢" #: src/main/memory.c:3331 #, fuzzy, c-format msgid "unprotect(): only %d protected item" msgid_plural "unprotect(): only %d protected items" msgstr[0] "unprotect():只有%d个保护项" #: src/main/memory.c:3369 msgid "unprotect_ptr: pointer not found" msgstr "unprotect_ptr: 找不到指针" #: src/main/memory.c:3408 #, fuzzy, c-format msgid "R_Reprotect: only %d protected item, can't reprotect index %d" msgid_plural "R_Reprotect: only %d protected items, can't reprotect index %d" msgstr[0] "R_Reprotect:只有%d个保护项, 不能重新保护索引%d" #: src/main/memory.c:3462 #, c-format msgid "'Calloc' could not allocate memory (%.0f of %u bytes)" msgstr "'Calloc'无法分配(%2$u字节的%1$.0f)内存" #: src/main/memory.c:3473 #, c-format msgid "'Realloc' could not re-allocate memory (%.0f bytes)" msgstr "'Realloc'无法重新分配(大小为%.0f字节)的内存" #: src/main/memory.c:3883 #, c-format msgid "SETLENGTH() can only be applied to a standard vector, not a '%s'" msgstr "" #: src/main/memory.c:4054 msgid "not safe to return vector pointer" msgstr "回覆矢量指针不是安全的做法" #: src/main/memory.c:4065 #, c-format msgid "attempt to set index %lld/%lld in SET_STRING_ELT" msgstr "" #: src/main/memory.c:4086 #, c-format msgid "attempt to set index %lld/%lld in SET_VECTOR_ELT" msgstr "" #: src/main/memory.c:4247 src/main/memory.c:4256 src/main/memory.c:4269 #: src/main/memory.c:4286 src/main/memory.c:4301 src/main/memory.c:4317 #: src/main/memory.c:4336 msgid "bad value" msgstr "值不对" #: src/main/memory.c:4514 msgid "memory profiling is not available on this system" msgstr "本系统没有记忆概要分析这个功能" #: src/main/memory.c:4577 #, c-format msgid "Rprofmem: cannot open output file '%s'" msgstr "Rprofmem: 无法输出文件'%s'" #: src/main/memory.c:4684 #, c-format msgid "long vectors not supported yet: %s:%d" msgstr "现在还没有支持长向量：%s:%d" #: src/main/names.c:1056 msgid "string argument required" msgstr "需要字符串参数" #: src/main/names.c:1059 msgid "no such primitive function" msgstr "没有这种原始函数" #: src/main/names.c:1254 src/main/names.c:1288 msgid "attempt to use zero-length variable name" msgstr "不能用零长度变数名" #: src/main/names.c:1256 src/main/names.c:1290 #, c-format msgid "variable names are limited to %d bytes" msgstr "变量名限制于%d字节" #: src/main/names.c:1353 src/main/names.c:1356 msgid "invalid .Internal() argument" msgstr ".Internal()参数不对" #: src/main/objects.c:39 msgid "generic 'function' is not a function" msgstr "类属'function'不是函数" #: src/main/objects.c:245 msgid "bad generic call environment" msgstr "类属调用环境不对" #: src/main/objects.c:253 msgid "bad generic definition environment" msgstr "类属定义环境不对" #: src/main/objects.c:347 msgid "no '.S3MethodsClass' table, cannot use S4 objects with S3 methods ('methods' package not attached?)" msgstr "没有'.S3MethodsClass'表，不能将S3方法用在S4目标对象上('methods'" #: src/main/objects.c:519 msgid "there must be a 'generic' argument" msgstr "必需有'generic'参数" #: src/main/objects.c:523 msgid "'generic' argument must be a character string" msgstr "'generic'参数必需是字符串" #: src/main/objects.c:536 msgid "'UseMethod' used in an inappropriate fashion" msgstr "'UseMethod'不能这样使用" #: src/main/objects.c:586 #, c-format msgid "no applicable method for '%s' applied to an object of class \"%s\"" msgstr "\"%s\"没有适用于\"%s\"目标对象的方法" #: src/main/objects.c:695 msgid "'NextMethod' called from outside a function" msgstr "不能在函数外调用'NextMethod' " #: src/main/objects.c:701 msgid "'NextMethod' called from an anonymous function" msgstr "不能在匿名函数内调用'NextMethod' " #: src/main/objects.c:722 msgid "no calling generic was found: was a method called directly?" msgstr "找不到调用此方法的类属函数: 是不是已经直接调用这个方法?" #: src/main/objects.c:725 #, c-format msgid "'function' is not a function, but of type %d" msgstr "'function'不是函数, 而是种类%d" #: src/main/objects.c:752 msgid "wrong argument ..." msgstr "参数不对 ..." #: src/main/objects.c:764 msgid "object not specified" msgstr "没有设定对象" #: src/main/objects.c:772 src/main/objects.c:779 msgid "generic function not specified" msgstr "没有设定类属功能" #: src/main/objects.c:776 msgid "invalid generic argument to 'NextMethod'" msgstr "'NextMethod'里不能有类属参数" #: src/main/objects.c:788 msgid "invalid 'group' argument found in 'NextMethod'" msgstr "'NextMethod'里的'group'参数不对" #: src/main/objects.c:805 msgid "wrong value for .Method" msgstr ".Method的值不对" #: src/main/objects.c:815 msgid "Incompatible methods ignored" msgstr "不可兼容方法，略过不用" #: src/main/objects.c:872 src/main/objects.c:879 msgid "no method to invoke" msgstr "没有可以调用的方法" #: src/main/objects.c:930 msgid "cannot unclass an environment" msgstr "无法取消环境的类别" #: src/main/objects.c:933 msgid "cannot unclass an external pointer" msgstr "无法取消外部指针的类别" #: src/main/objects.c:994 msgid "'what' must be a character vector" msgstr "'what'必需是字符矢量" #: src/main/objects.c:998 msgid "'which' must be a length 1 logical vector" msgstr "'which'必需是长度为一的逻辑矢量" #: src/main/objects.c:1129 msgid "could not find correct environment; please report!" msgstr "找不到正确的环境；请报告!" #: src/main/objects.c:1173 msgid "'onOff' must be TRUE or FALSE" msgstr "'onOff'必需是TRUE或FALSE" #: src/main/objects.c:1238 #, c-format msgid "unable to find a non-generic version of function \"%s\"" msgstr "无法找到函数\"%s\"非类属的版本" #: src/main/objects.c:1270 msgid "'standardGeneric' called without 'methods' dispatch enabled (will be ignored)" msgstr "'methods'分派没有激活，因此不能调用'standardGeneric' (略过不用)" #: src/main/objects.c:1278 msgid "argument to 'standardGeneric' must be a non-empty character string" msgstr "'standardGeneric'的参数必需是非空字符串" #: src/main/objects.c:1283 #, c-format msgid "call to standardGeneric(\"%s\") apparently not from the body of that generic function" msgstr "不能从非泛型函数体内调用standardGeneric(\"%s\") " #: src/main/objects.c:1382 #, c-format msgid "invalid primitive methods code (\"%s\"): should be \"clear\", \"reset\", \"set\", or \"suppress\"" msgstr "原始方法代码(\"%s\")有错：应该是\"clear\", \"reset\", \"set\", 或\"suppress\"" #: src/main/objects.c:1390 msgid "invalid object: must be a primitive function" msgstr "对象不对: 必需是原始函数" #: src/main/objects.c:1437 #, c-format msgid "the formal definition of a primitive generic must be a function object (got type '%s')" msgstr "原始同属函数的正式定义必需是函数对象(不能是'%s'类)" #: src/main/objects.c:1467 #, c-format msgid "object returned as generic function \"%s\" does not appear to be one" msgstr "回归为同属函数的目标对象\"%s\"看起来不象" #: src/main/objects.c:1556 msgid "invalid primitive operation given for dispatch" msgstr "不能分派原始运算" #: src/main/objects.c:1587 src/main/objects.c:1617 msgid "dispatch error" msgstr "分派错误" #: src/main/objects.c:1611 #, c-format msgid "primitive function \"%s\" has been set for methods but no generic function supplied" msgstr "原始函数\"%s\"有了设定的方法，但却没有同属函数 " #: src/main/objects.c:1642 msgid "C level MAKE_CLASS macro called with NULL string pointer" msgstr "调用C层的MAKE_TYPE宏时不能用NULL字符串指针" #: src/main/objects.c:1658 #, fuzzy msgid "'methods' package not yet loaded" msgstr "无法载入Hershey字形" #: src/main/objects.c:1668 msgid "R_getClassDef(.) called with NULL string pointer" msgstr "调用R_getClassDef(.) 时不能用NULL字符串指针" #: src/main/objects.c:1715 msgid "C level NEW macro called with null class definition pointer" msgstr "调用C级的NEW宏时不能用null类别定义指针" #: src/main/objects.c:1719 #, c-format msgid "trying to generate an object from a virtual class (\"%s\")" msgstr "无法从虚拟类别(\"%s\")中产生对象" #: src/main/objects.c:1804 #, c-format msgid "object of class \"%s\" does not correspond to a valid S3 object" msgstr "类别为\"%s\"的目标对象不符合一个有效的S3目标对象" #: src/main/options.c:135 src/main/options.c:210 msgid "corrupted options list" msgstr "选择项名单败坏" #: src/main/options.c:145 #, fuzzy, c-format msgid "invalid printing width %d, used 80" msgstr "印刷宽度不对，用80" #: src/main/options.c:148 #, fuzzy msgid "invalid printing width" msgstr "印刷宽度不对，用80" #: src/main/options.c:163 #, fuzzy, c-format msgid "invalid printing digits %d, used 7" msgstr "印刷数字无效，用7" #: src/main/options.c:166 #, fuzzy, c-format msgid "invalid printing digits %d" msgstr "印刷数字无效，用7" #: src/main/options.c:182 msgid "invalid 'deparse.cutoff', used 60" msgstr "'deparse.cutoff'无效，用了60" #: src/main/options.c:194 msgid "invalid value for \"device.ask.default\", using FALSE" msgstr "\"device.ask.default\"的值无效，用FALSE" #: src/main/options.c:485 msgid "list argument has no valid names" msgstr "串列参数的名字不对" #: src/main/options.c:531 #, fuzzy, c-format msgid "option '%s' cannot be deleted" msgstr "无法打开'%s'文件" #: src/main/options.c:536 src/main/options.c:547 src/main/options.c:554 #, fuzzy, c-format msgid "invalid '%s' parameter, allowed %d...%d" msgstr "'digits'参数不对，可用%d...%d" #: src/main/options.c:561 src/main/options.c:569 src/main/options.c:575 #: src/main/options.c:583 src/main/options.c:590 src/main/options.c:595 #: src/main/options.c:602 src/main/options.c:612 src/main/options.c:627 #: src/main/options.c:633 src/main/options.c:638 src/main/options.c:643 #: src/main/options.c:652 src/main/options.c:658 src/main/options.c:664 #: src/main/options.c:674 src/main/options.c:688 src/main/options.c:694 #: src/main/options.c:702 src/main/options.c:709 src/main/options.c:716 #: src/main/options.c:723 src/main/options.c:730 src/main/options.c:738 #: src/main/options.c:747 src/main/options.c:750 src/main/options.c:756 #: src/main/options.c:764 src/main/options.c:777 src/main/options.c:818 #, c-format msgid "invalid value for '%s'" msgstr "'%s'的值不对" #: src/main/options.c:617 #, c-format msgid "value for '%s' outside of -1:2 is set to %d\n" msgstr "" #: src/main/options.c:679 #, fuzzy msgid "'OutDec' must be a string of one character" msgstr "'dec'必需为单节字符" #: src/main/options.c:743 src/main/options.c:837 msgid "\"par.ask.default\" has been replaced by \"device.ask.default\"" msgstr "\"device.ask.default\"代替了\"par.ask.default\" " #: src/main/options.c:774 #, fuzzy msgid "OpenMP SIMD is not supported in this build of R" msgstr "本平台不支持ICU" #: src/main/options.c:798 msgid "'PCRE_study' has no effect with PCRE2" msgstr "" #: src/main/options.c:821 #, c-format msgid "'%s' is deprecated and will be disabled" msgstr "" #: src/main/options.c:834 msgid "invalid argument" msgstr "参数不对" #: src/main/paste.c:78 src/main/util.c:483 #, c-format msgid "%d argument passed to .Internal(%s) which requires %d" msgid_plural "%d arguments passed to .Internal(%s) which requires %d" msgstr[0] ".Internal(%2$s)收到了%1$d个参数，但它最多只能用%3$d个参数" #: src/main/paste.c:103 src/main/paste.c:345 msgid "invalid separator" msgstr "分隔符不对" #: src/main/paste.c:150 src/main/paste.c:365 #, fuzzy, c-format msgid "non-string argument to .Internal(%s)" msgstr "内部貼補的参数不是字符串" #: src/main/paste.c:215 src/main/paste.c:286 msgid "result would exceed 2^31-1 bytes" msgstr "结果将会超过2^31-1个字节" #: src/main/paste.c:378 #, fuzzy msgid "strings with \"bytes\" encoding are not allowed" msgstr "不允许用\"bytes\"编码进行字符翻译”" #: src/main/paste.c:460 #, fuzzy msgid "first argument must be atomic or environment" msgstr "参数必需是环境" #: src/main/paste.c:472 #, fuzzy, c-format msgid "invalid value %d for '%s' argument" msgstr "'%s'的值不对" #: src/main/paste.c:521 #, fuzzy msgid "'decimal.mark' must be a string of one character" msgstr "'dec'必需为单节字符" #: src/main/paste.c:652 msgid "Impossible mode ( x )" msgstr "不可能出现这种状态(x)" #: src/main/paste.c:736 msgid "atomic vector arguments only" msgstr "只能用原子矢量参数" #: src/main/platform.c:476 src/main/platform.c:490 msgid "invalid filename specification" msgstr "文件名字设定不对" #: src/main/platform.c:543 src/main/platform.c:588 msgid "write error during file append" msgstr "文件追加时书写出错" #: src/main/platform.c:563 msgid "nothing to append to" msgstr "没有可以追加的文件" #: src/main/platform.c:617 src/main/platform.c:951 src/main/platform.c:1170 msgid "invalid filename argument" msgstr "filename参数不对" #: src/main/platform.c:630 #, c-format msgid "cannot create file '%s', reason '%s'" msgstr "由于'%2$s'的原因，无法建立'%1$s'文件" #: src/main/platform.c:645 src/main/platform.c:686 src/main/platform.c:774 msgid "invalid first filename" msgstr "第一个文件名字不对" #: src/main/platform.c:657 #, c-format msgid "cannot remove file '%s', reason '%s'" msgstr "无法删除文件'%s'，原因是'%s'" #: src/main/platform.c:688 src/main/platform.c:776 msgid "invalid second filename" msgstr "第二个文件名字不对" #: src/main/platform.c:691 src/main/platform.c:779 msgid "nothing to link" msgstr "没有可以链结的文件" #: src/main/platform.c:701 msgid "symbolic links are not supported on this version of Windows" msgstr "此版本的Windows不支持符号链结" #: src/main/platform.c:717 src/main/platform.c:794 src/main/platform.c:2637 #: src/main/platform.c:2648 #, fuzzy, c-format msgid "'%s' path too long" msgstr "路径太长" #: src/main/platform.c:726 #, c-format msgid "cannot symlink '%ls' to '%ls', reason '%s'" msgstr "无法打开'%ls'到'%ls'的链结，原因是'%s'" #: src/main/platform.c:748 #, c-format msgid "cannot symlink '%s' to '%s', reason '%s'" msgstr "无法打开'%s'到'%s'的链结，原因是'%s'" #: src/main/platform.c:756 msgid "symbolic links are not supported on this platform" msgstr "这个平台不支持符号链结" #: src/main/platform.c:799 #, c-format msgid "cannot link '%ls' to '%ls', reason '%s'" msgstr "无法打开'%ls'到'%ls'的链结，原因是'%s'" #: src/main/platform.c:821 #, c-format msgid "cannot link '%s' to '%s', reason '%s'" msgstr "无法打开'%s'到'%s'的链结，原因是'%s'" #: src/main/platform.c:830 msgid "(hard) links are not supported on this platform" msgstr "这个平台不支持(硬)链结" #: src/main/platform.c:862 msgid "'from' and 'to' are of different lengths" msgstr "from'和'to'的长度不一样" #: src/main/platform.c:873 src/main/platform.c:888 msgid "expanded 'from' name too long" msgstr "扩展后的'from'名字太长" #: src/main/platform.c:877 src/main/platform.c:892 msgid "expanded 'to' name too long" msgstr "扩展后的'to'名字太长" #: src/main/platform.c:881 #, fuzzy, c-format msgid "cannot rename file '%ls' to '%ls', reason '%s'" msgstr "由于'%3$s'的原因，无法将文件名字'%1$s'改成'%2$s'" #: src/main/platform.c:896 #, c-format msgid "cannot rename file '%s' to '%s', reason '%s'" msgstr "由于'%3$s'的原因，无法将文件名字'%1$s'改成'%2$s'" #: src/main/platform.c:1273 src/main/platform.c:1304 src/main/platform.c:1418 #: src/main/platform.c:1431 src/main/platform.c:2507 src/main/platform.c:2519 #: src/main/platform.c:2548 src/main/platform.c:2570 src/main/platform.c:2758 #: src/main/platform.c:2771 src/main/platform.c:2802 src/main/platform.c:2824 #, fuzzy msgid "over-long path" msgstr "路径长度太长了" #: src/main/platform.c:1362 msgid "invalid 'pattern' regular expression" msgstr "'pattern'正规表现不对" #: src/main/platform.c:1486 msgid "unable to determine R home location" msgstr "无法确定R本录位置" #: src/main/platform.c:1541 msgid "file name too long" msgstr "文件名太长" #: src/main/platform.c:1745 src/main/util.c:833 src/main/util.c:867 #: src/main/util.c:909 src/main/util.c:951 msgid "path too long" msgstr "路径太长" #: src/main/platform.c:1806 src/main/platform.c:1870 src/main/sysutils.c:2060 #: src/main/sysutils.c:2074 msgid "internal out-of-memory condition" msgstr "内部出现了内存不够情况" #: src/main/platform.c:1866 src/main/sysutils.c:2070 #, c-format msgid "read error on '%s'" msgstr "读取'%s'时出了错" #: src/main/platform.c:1973 msgid "setting 'LC_NUMERIC' may cause R to function strangely" msgstr "设定'LC_NUMERIC'后有可能会使R运转出现问题" #: src/main/platform.c:1987 msgid "LC_MESSAGES exists on Windows but is not operational" msgstr "LC_MESSAGES存在于Windows里，但没有用" #: src/main/platform.c:2014 #, c-format msgid "OS reports request to set locale to \"%s\" cannot be honored" msgstr "操作系统报告说无法执行将本地化设成\"%s\"的请求" #: src/main/platform.c:2400 #, c-format msgid "'%s' already exists" msgstr "'%s'已存在" #: src/main/platform.c:2403 #, c-format msgid "cannot create dir '%s', reason '%s'" msgstr "由于'%2$s'的原因，无法建立'%1$s'文件目录" #: src/main/platform.c:2426 #, fuzzy, c-format msgid "'%s' too long" msgstr "符号'%s'太长" #: src/main/platform.c:2457 #, c-format msgid "'%ls' already exists" msgstr "'%ls'已存在" #: src/main/platform.c:2459 src/main/platform.c:2465 #, c-format msgid "cannot create dir '%ls', reason '%s'" msgstr "由于'%2$s'的原因，无法建立'%1$ls'文件目录" #: src/main/platform.c:2499 src/main/platform.c:2742 msgid "too deep nesting" msgstr "嵌套过深" #: src/main/platform.c:2531 #, c-format msgid "cannot overwrite non-directory %ls with directory %ls" msgstr "" #: src/main/platform.c:2536 #, c-format msgid "problem creating directory %ls: %s" msgstr "建立文件目录%ls时出了问题：%s" #: src/main/platform.c:2558 #, fuzzy, c-format msgid "problem reading directory %ls: %s" msgstr "读取文件目录%s时出了问题：%s" #: src/main/platform.c:2578 #, c-format msgid "problem copying %ls to %ls: %s" msgstr "拷贝%ls到%ls时出了问题：%s " #: src/main/platform.c:2785 #, c-format msgid "cannot overwrite non-directory %s with directory %s" msgstr "" #: src/main/platform.c:2790 #, c-format msgid "problem creating directory %s: %s" msgstr "建立文件目录%s时出了问题：%s" #: src/main/platform.c:2812 #, c-format msgid "problem reading directory %s: %s" msgstr "读取文件目录%s时出了问题：%s" #: src/main/platform.c:2833 #, c-format msgid "problem copying %s to %s: %s" msgstr "拷贝%s到%s出了问题: %s " #: src/main/platform.c:2983 msgid "'mode' must be of length at least one" msgstr "'mode'的长度至少需要是一" #: src/main/platform.c:3051 msgid "insufficient OS support on this platform" msgstr "本平台操作系统支持不够" #: src/main/platform.c:3161 #, fuzzy, c-format msgid "'%s' must be of length at least one" msgstr "'mode'的长度至少需要是一" #: src/main/plot3d.c:120 #, c-format msgid "contour(): circular/long seglist -- set %s > %d?" msgstr "contour():圆的/长的seglist – 是不是应该把%s设成大于%d?" #: src/main/plot3d.c:198 msgid "all z values are equal" msgstr "所有的z值是一样的" #: src/main/plot3d.c:200 msgid "all z values are NA" msgstr "所有的z值都是NA" #: src/main/plotmath.c:333 msgid "invalid math style encountered" msgstr "数学字体不对" #: src/main/plotmath.c:1265 src/main/plotmath.c:1371 src/main/plotmath.c:2664 msgid "invalid mathematical annotation" msgstr "数学注释不对" #: src/main/plotmath.c:1675 msgid "invalid accent" msgstr "重音不对" #: src/main/plotmath.c:1973 msgid "invalid group delimiter" msgstr "组定界不对" #: src/main/plotmath.c:2000 src/main/plotmath.c:2137 msgid "invalid group specification" msgstr "组设定不对" #: src/main/plotmath.c:2062 msgid "group is incomplete" msgstr "组不全" #: src/main/plotmath.c:3190 msgid "Metric information not available for this family/device" msgstr "公制信息不适用此系列/设备" #: src/main/print.c:146 src/main/print.c:253 msgid "invalid 'na.print' specification" msgstr "'na.print'设定不对" #: src/main/print.c:155 msgid "invalid row labels" msgstr "行標記不对" #: src/main/print.c:157 msgid "invalid column labels" msgstr "列標記不对" #: src/main/print.c:265 msgid "'gap' must be non-negative integer" msgstr "'gap'必需是正整数" #: src/main/print.c:268 #, fuzzy, c-format msgid "'print.gap' must be less than %d" msgstr "'fromLast'的长度必需为一" #: src/main/print.c:999 #, fuzzy msgid "print buffer overflow" msgstr "%d行输入缓冲区上溢" #: src/main/print.c:1127 msgid "invalid character length in 'dblepr'" msgstr "'dblepr'字符长度不对" #: src/main/print.c:1148 msgid "invalid character length in 'intpr'" msgstr "'intpr'字符长度不对" #: src/main/print.c:1170 msgid "invalid character length in 'realpr'" msgstr "'realpr'字符长度不对" #: src/main/print.c:1180 msgid "memory allocation error in 'realpr'" msgstr "'realpr'内存分配错误" #: src/main/print.c:1213 #, c-format msgid "BLAS/LAPACK routine '%6s' gave error code %d" msgstr "BLAS/LAPACK 例行程序'%6s'产生了错误%d信息" #: src/main/printarray.c:340 msgid "too few row labels" msgstr "行標記不够" #: src/main/printarray.c:342 msgid "too few column labels" msgstr "列標記不够" #: src/main/printarray.c:376 #, c-format msgid " [ reached getOption(\"max.print\") -- omitted %d row ]\n" msgid_plural " [ reached getOption(\"max.print\") -- omitted %d rows ]\n" msgstr[0] "[到达getOption(\"max.print\") -- 略过%d行]]\n" #: src/main/printutils.c:642 #, c-format msgid "too large string (nchar=%d) => 5*nchar + 8 > SIZE_MAX" msgstr "" #: src/main/printutils.c:756 msgid "it is not known that wchar_t is Unicode on this platform" msgstr " wchar_t在本平台上不应该是Unicode" #: src/main/qsort.c:55 msgid "argument is not a numeric vector" msgstr "参数不是数值矢量" #: src/main/random.c:39 msgid "invalid arguments" msgstr "参数不对" #: src/main/random.c:95 src/main/random.c:112 src/main/random.c:178 #: src/main/random.c:204 src/main/random.c:277 src/main/random.c:291 msgid "NAs produced" msgstr "产生了NA" #: src/main/random.c:445 msgid "NA in probability vector" msgstr "机率矢量中有NA" #: src/main/random.c:447 #, fuzzy msgid "negative probability" msgstr "不能有非负机率" #: src/main/random.c:454 msgid "too few positive probabilities" msgstr "正值机率太少" #: src/main/random.c:483 src/main/random.c:511 msgid "cannot take a sample larger than the population when 'replace = FALSE'" msgstr "" "'replace = FALSE'，因此不能取比总体要大的样本\n" " " #: src/main/random.c:490 msgid "incorrect number of probabilities" msgstr "机率数目不对" #: src/main/random.c:529 msgid "n >= 2^31, replace = FALSE is only supported on 64-bit platforms" msgstr "n >= 2^31, replace = FALSE只能在64位平台上才能用" #: src/main/raw.c:37 src/main/raw.c:330 msgid "argument must be a character vector of length 1" msgstr "参数必需是长度为一的字符矢量" #: src/main/raw.c:39 src/main/raw.c:332 msgid "" "argument should be a character vector of length 1\n" "all but the first element will be ignored" msgstr "参数应该是长度为一的字符矢量，因此只能用其第一元素" #: src/main/raw.c:53 src/main/raw.c:90 src/main/raw.c:113 msgid "argument 'x' must be a raw vector" msgstr "参数'x'必需是矢量" #: src/main/raw.c:56 src/main/raw.c:388 msgid "argument 'multiple' must be TRUE or FALSE" msgstr "'multiple'的参数值必需是TRUE或是FALSE" #: src/main/raw.c:92 #, fuzzy msgid "argument 'n' must be a small integer" msgstr "'shift'参数必需是整数" #: src/main/raw.c:129 src/main/raw.c:385 msgid "argument 'x' must be an integer vector" msgstr "'x'参数必需是整数矢量" #: src/main/raw.c:155 src/main/raw.c:178 #, fuzzy msgid "argument 'x' must be a numeric vector" msgstr "参数'x'必需是矢量" #: src/main/raw.c:205 msgid "argument 'x' must be raw, integer or logical" msgstr "参数'x'必需是原始，整数或逻辑值" #: src/main/raw.c:215 #, c-format msgid "argument 'x' must be a multiple of %d long" msgstr "参数'x'必需是长%d的倍数" #: src/main/raw.c:228 src/main/raw.c:242 src/main/raw.c:264 msgid "argument 'x' must not contain NAs" msgstr "'x'参数不能带NA" #: src/main/raw.c:344 src/main/util.c:1912 msgid "invalid UTF-8 string" msgstr "UTF-8字符串有错" #: src/main/raw.c:391 #, fuzzy msgid "argument 'allow_surrogate_pairs' must be TRUE or FALSE" msgstr "'multiple'的参数值必需是TRUE或是FALSE" #: src/main/relop.c:163 #, c-format msgid "comparison (%d) is possible only for atomic and list types" msgstr "只能比较(%d)基元或串列种类" #: src/main/relop.c:167 msgid "comparison is not allowed for expressions" msgstr "不能比较表达式" #: src/main/relop.c:258 msgid "comparison of these types is not implemented" msgstr "这些种类的比较方法还没有实现" #: src/main/relop.c:361 msgid "invalid comparison with complex values" msgstr "不能比较复数值" #: src/main/relop.c:636 src/main/relop.c:681 src/main/relop.c:715 msgid "'a' and 'b' must have the same type" msgstr "'a'和'b'的种类必需相同" #: src/main/saveload.c:205 src/main/saveload.c:210 src/main/saveload.c:219 #: src/main/saveload.c:228 src/main/saveload.c:237 src/main/saveload.c:246 #: src/main/saveload.c:250 src/main/saveload.c:259 src/main/saveload.c:1394 #: src/main/saveload.c:1399 src/main/saveload.c:1443 src/main/saveload.c:1511 #: src/main/saveload.c:1520 src/main/serialize.c:394 src/main/serialize.c:401 #: src/main/serialize.c:414 src/main/serialize.c:418 src/main/serialize.c:445 #: src/main/serialize.c:461 src/main/serialize.c:1992 src/main/serialize.c:2768 #: src/main/serialize.c:2776 msgid "read error" msgstr "读取错误" #: src/main/saveload.c:337 msgid "a I read error occurred" msgstr "发生了I类读取错误" #: src/main/saveload.c:347 msgid "a R read error occurred" msgstr "发生了R类读取错误" #: src/main/saveload.c:357 msgid "a C read error occurred" msgstr "发生了C类读取错误" #: src/main/saveload.c:367 msgid "a S read error occurred" msgstr "发生了S类读取错误" #: src/main/saveload.c:392 src/main/saveload.c:400 src/main/saveload.c:408 #: src/main/saveload.c:1607 src/main/saveload.c:1615 msgid "a read error occurred" msgstr "发生了读取错误" #: src/main/saveload.c:472 msgid "unresolved node during restore" msgstr "復原时遇到了无法解析的节点" #: src/main/saveload.c:493 #, c-format msgid "restore compatibility error - no version %d compatibility" msgstr "復原相容错误：没有同版本%d相容的功能" #: src/main/saveload.c:577 src/main/saveload.c:650 msgid "bad SEXP type in data file" msgstr "数据文件里SEXP种类出错" #: src/main/saveload.c:591 msgid "mismatch on types" msgstr "种类不相配" #: src/main/saveload.c:612 src/main/saveload.c:1283 src/main/serialize.c:1920 #, fuzzy, c-format msgid "unrecognized internal function name \"%s\"" msgstr "没有\"%s\"这个函数" #: src/main/saveload.c:714 msgid "cannot save file position while restoring data" msgstr "在复原数据时无法保存文件位置" #: src/main/saveload.c:727 msgid "cannot restore file position while restoring data" msgstr "在复原数据时无法复原文件位置" #: src/main/saveload.c:920 msgid "base namespace is not preserved in version 1 workspaces" msgstr "一号版本的工作空间不能保全基本名字空间" #: src/main/saveload.c:922 msgid "cannot save namespace in version 1 workspaces" msgstr "一号版本的工作空间无法保存名字空间" #: src/main/saveload.c:924 msgid "cannot save environment with locked/active bindings in version 1 workspaces" msgstr "一号版本的工作空间不能保存锁定的/活动的联编" #: src/main/saveload.c:952 msgid "cannot save weak references in version 1 workspaces" msgstr "一号版本的工作空间无法保存弱引用" #: src/main/saveload.c:1030 msgid "NewWriteVec called with non-vector type" msgstr "NewWriteVec不适用于非矢量种类" #: src/main/saveload.c:1097 msgid "cannot save byte code objects in version 1 workspaces" msgstr "一号版本的工作空间无法保存位元组码对象" #: src/main/saveload.c:1099 #, c-format msgid "NewWriteItem: unknown type %i" msgstr "NewWriteItem: 没有%i这一种类" #: src/main/saveload.c:1229 msgid "NewReadVec called with non-vector type" msgstr "NewReadVec不适用于非矢量种类" #: src/main/saveload.c:1299 msgid "cannot read byte code objects from version 1 workspaces" msgstr "无法从一号版本的工作空间里读取位元组码对象" #: src/main/saveload.c:1301 #, c-format msgid "NewReadItem: unknown type %i" msgstr "NewReadItem: 没有%i这一种类" #: src/main/saveload.c:1453 msgid "out of memory reading ascii string" msgstr "读取ascii字符串时内存不够" #: src/main/saveload.c:1578 msgid "a binary read error occurred" msgstr "二进列读取时发生了错误" #: src/main/saveload.c:1593 src/main/saveload.c:1694 msgid "out of memory reading binary string" msgstr "读取二进列字符串时内存不够" #: src/main/saveload.c:1598 msgid "a binary string read error occurred" msgstr "读取二进列字符串时发生了错误" #: src/main/saveload.c:1658 msgid "an xdr integer data write error occurred" msgstr "xdr整数数据书写错误" #: src/main/saveload.c:1665 msgid "an xdr integer data read error occurred" msgstr "xdr整数数据读取错误" #: src/main/saveload.c:1680 src/main/saveload.c:1699 msgid "an xdr string data write error occurred" msgstr "xdr字符串数据书写错误" #: src/main/saveload.c:1707 msgid "an xdr real data write error occurred" msgstr "xdr实数数据书写错误" #: src/main/saveload.c:1714 msgid "an xdr real data read error occurred" msgstr "xdr实数数据读取错误" #: src/main/saveload.c:1721 msgid "an xdr complex data write error occurred" msgstr "xdr复数数据书写错误" #: src/main/saveload.c:1728 msgid "an xdr complex data read error occurred" msgstr "xdr复数数据读取错误" #: src/main/saveload.c:1805 src/main/serialize.c:2333 src/main/serialize.c:2960 #: src/modules/internet/internet.c:390 src/modules/internet/internet.c:463 msgid "write failed" msgstr "书写失败" #: src/main/saveload.c:1964 msgid "restore file may be empty -- no data loaded" msgstr "復原文件可能是空的 -- 没有载入任何数据" #: src/main/saveload.c:1966 msgid "restore file may be from a newer version of R -- no data loaded" msgstr "復原文件可能是由比目前R版本要新的R保存的 -- 没有载入任何数据" #: src/main/saveload.c:1968 msgid "bad restore file magic number (file may be corrupted) -- no data loaded" msgstr "復原文件幻数出错(文件可能有损坏)-- 没有载入任何数据" #: src/main/saveload.c:1984 msgid "bad file name" msgstr "文件名字不对" #: src/main/saveload.c:1988 src/main/saveload.c:2016 msgid "unable to open 'file'" msgstr "无法打开'file'" #: src/main/saveload.c:2004 src/main/saveload.c:2046 msgid "'file' must be non-empty string" msgstr "'file'必需是非空字符串" #: src/main/saveload.c:2006 src/main/saveload.c:2048 src/main/saveload.c:2348 #: src/main/serialize.c:2525 msgid "'ascii' must be logical" msgstr "'ascii’必需是逻辑值" #: src/main/saveload.c:2044 src/main/saveload.c:2342 msgid "first argument must be a character vector" msgstr "第一参数必需是字符矢量" #: src/main/saveload.c:2116 msgid "not a valid named list" msgstr "带名字的串列不对" #: src/main/saveload.c:2123 src/main/saveload.c:2144 #, c-format msgid "'%s' looks like a pre-2.4.0 S4 object: please recreate it" msgstr "'%s'看起来好象是2.4.0前的S4目标对象；请重新创造" #: src/main/saveload.c:2131 msgid "loaded data is not in pair list form" msgstr "载入数据没有成双串列形式" #: src/main/saveload.c:2167 msgid "first argument must be a file name" msgstr "第一参数必需是文件名字" #: src/main/saveload.c:2212 src/main/saveload.c:2238 src/main/serialize.c:908 #: src/main/serialize.c:945 src/main/serialize.c:983 msgid "XDR write failed" msgstr "XDR书写失败" #: src/main/saveload.c:2225 src/main/saveload.c:2250 src/main/serialize.c:1501 #: src/main/serialize.c:1537 src/main/serialize.c:1575 msgid "XDR read failed" msgstr "XDR读取失败" #: src/main/saveload.c:2261 #, c-format msgid "cannot save data -- unable to open '%s': %s" msgstr "无法保存数据 -- 无法打开%s: %s" #: src/main/saveload.c:2358 src/main/serialize.c:2538 #, c-format msgid "cannot save to connections in version %d format" msgstr "无法用%d版本的格式来保存链结" #: src/main/saveload.c:2381 src/main/serialize.c:2563 msgid "connection not open for writing" msgstr "无法打开链结进行书写" #: src/main/saveload.c:2391 msgid "cannot save XDR format to a text-mode connection" msgstr "不能将XDR格式保存到文字状态链结" #: src/main/saveload.c:2403 src/main/serialize.c:2441 src/main/serialize.c:2455 #: src/main/serialize.c:2642 src/main/serialize.c:2664 msgid "error writing to connection" msgstr "链结书写发生了错误" #: src/main/saveload.c:2465 src/main/serialize.c:2609 msgid "connection not open for reading" msgstr "链结没有打开，不能读" #: src/main/saveload.c:2466 msgid "can only load() from a binary connection" msgstr "二进列链结只能用load()这个方法" #: src/main/saveload.c:2479 msgid "no input is available" msgstr "没有输入值" #: src/main/saveload.c:2504 msgid "the input does not start with a magic number compatible with loading from a connection" msgstr "在通过联结进行输入时，文件头没有魔号" #: src/main/scan.c:368 src/main/scan.c:418 msgid "EOF within quoted string" msgstr "" #: src/main/scan.c:488 #, c-format msgid "scan() expected '%s', got '%s'" msgstr "scan()需要'%s', 而不是'%s'" #: src/main/scan.c:593 src/main/scan.c:748 msgid "too many items" msgstr "项目太多" #: src/main/scan.c:681 msgid "empty 'what' specified" msgstr "'what'设定不能是空的" #: src/main/scan.c:736 #, fuzzy, c-format msgid "line %lld did not have %lld elements" msgstr "%d行没有%d元素" #: src/main/scan.c:788 msgid "number of items read is not a multiple of the number of columns" msgstr "读取的项目数必需是列数的倍数" #: src/main/scan.c:883 msgid "invalid 'strip.white' length" msgstr "'strip.white'的长度不对" #: src/main/scan.c:894 msgid "invalid 'sep' value: must be one byte" msgstr "'sep'值不对: 大小只能为一拜" #: src/main/scan.c:906 msgid "invalid decimal separator: must be one byte" msgstr "十进位分隔符不对: 大小只能为一拜" #: src/main/scan.c:911 msgid "invalid decimal separator" msgstr "十进位分隔符不对" #: src/main/scan.c:920 msgid "invalid quote symbol set" msgstr "引号符号集不对" #: src/main/scan.c:1002 #, fuzzy msgid "embedded nul(s) found in input" msgstr "字符串里嵌入了nul：'%s'" #: src/main/seq.c:49 msgid "unequal factor lengths" msgstr "因子长度不相等" #: src/main/seq.c:101 src/main/seq.c:1101 msgid "result would be too long a vector" msgstr "答案矢量会太长" #: src/main/seq.c:155 msgid "argument of length 0" msgstr "参数长度为零" #: src/main/seq.c:158 src/main/seq.c:163 #, fuzzy, c-format msgid "numerical expression has %d element: only the first used" msgid_plural "numerical expression has %d elements: only the first used" msgstr[0] "数值表达式一共有%d元素: 只用了第一个" #: src/main/seq.c:169 msgid "NA/NaN argument" msgstr "NA/NaN参数" #: src/main/seq.c:357 #, fuzzy, c-format msgid "invalid type (%s) for '%s' (must be a vector)" msgstr "设'dimnames'时的种类(%s)不对(必需为矢量)" #: src/main/seq.c:361 #, c-format msgid "attempt to replicate an object of type '%s'" msgstr "种类为'%s'的目标对象不能被复制" #: src/main/seq.c:433 msgid "attempt to replicate non-vector" msgstr "非矢量不能被复制" #: src/main/seq.c:448 msgid "cannot replicate NULL to a non-zero length" msgstr "不能复制NULL到一个非零长度的" #: src/main/seq.c:681 src/main/seq.c:697 src/main/seq.c:855 src/main/seq.c:1093 #, c-format msgid "first element used of '%s' argument" msgstr "只用'%s'参数里的第一个元素" #: src/main/seq.c:835 src/main/seq.c:867 src/main/seq.c:874 src/main/seq.c:957 #: src/main/seq.c:958 src/main/seq.c:1003 src/main/seq.c:1004 #: src/main/seq.c:1025 src/main/seq.c:1026 #, fuzzy, c-format msgid "'%s' must be a finite number" msgstr "'pos'的值必需是整数" #: src/main/seq.c:853 msgid "'length.out' must be a non-negative number" msgstr "'length.out'必需是正整数" #: src/main/seq.c:864 src/main/seq.c:871 src/main/seq.c:879 #, fuzzy, c-format msgid "'%s' must be of length 1" msgstr "'%s'的长度必需为一" #: src/main/seq.c:897 #, fuzzy msgid "invalid '(to - from)/by'" msgstr "'seq'内的'(to - from)/by'值设得不对" #: src/main/seq.c:909 msgid "'by' argument is much too small" msgstr "'by'参数太小了" #: src/main/seq.c:911 msgid "wrong sign in 'by' argument" msgstr "'by'正负号不对" #: src/main/seq.c:1099 src/main/seq.c:1106 msgid "argument must be coercible to non-negative integer" msgstr "参数必需能被强制改变成非负整数" #: src/main/seq.c:1126 #, fuzzy msgid "'lengths' is not of mode integer" msgstr "参数不是字符状态" #: src/main/seq.c:1129 #, fuzzy msgid "'from' is not of mode integer" msgstr "参数不是字符状态" #: src/main/seq.c:1132 #, fuzzy msgid "'by' is not of mode integer" msgstr "参数不是字符状态" #: src/main/seq.c:1139 #, fuzzy msgid "'from' has length 0, but not 'lengths'" msgstr "组的长度为零但数据的长度大于零" #: src/main/seq.c:1141 #, fuzzy msgid "'by' has length 0, but not 'lengths'" msgstr "组的长度为零但数据的长度大于零" #: src/main/seq.c:1148 #, fuzzy msgid "'lengths' must be a vector of non-negative integers" msgstr "'gap'必需是正整数" #: src/main/seq.c:1163 msgid "'from' contains NAs" msgstr "" #: src/main/seq.c:1168 msgid "'by' contains NAs" msgstr "" #: src/main/serialize.c:268 src/main/serialize.c:315 src/main/serialize.c:339 msgid "unknown or inappropriate output format" msgstr "输出格式不对" #: src/main/serialize.c:584 msgid "must specify ascii, binary, or xdr format" msgstr "必需设定ascii， binary， 或xdr格式中的一个" #: src/main/serialize.c:585 msgid "unknown output format" msgstr "没有这种输出格式" #: src/main/serialize.c:616 src/main/serialize.c:2255 msgid "unknown input format" msgstr "没有这种输入格式" #: src/main/serialize.c:621 msgid "input format does not match specified format" msgstr "输入格式同设定的格式不相配" #: src/main/serialize.c:834 msgid "no restore method available" msgstr "没有復原的方法" #: src/main/serialize.c:876 msgid "names in persistent strings are currently ignored" msgstr "持续字符串里的名字现在不用" #: src/main/serialize.c:1076 #, c-format msgid "'%s' may not be available when loading" msgstr "载入时'%s'可能无用" #: src/main/serialize.c:1084 msgid "namespaces may not be available when loading" msgstr "载入时名字空间可能无用" #: src/main/serialize.c:1224 #, c-format msgid "WriteItem: unknown type %i" msgstr "WriteItem不对: 没有这一种类%i" #: src/main/serialize.c:1411 #, c-format msgid "version %d not supported" msgstr "不支持版本%d" #: src/main/serialize.c:1444 msgid "reference index out of range" msgstr "引用索引在范围外" #: src/main/serialize.c:1474 msgid "names in persistent strings are not supported yet" msgstr "目前不支持持续字符串里的名字" #: src/main/serialize.c:1679 #, fuzzy, c-format msgid "deserializing invalid UTF-8 string '%s'" msgstr "UTF-8字符串'old'有错" #: src/main/serialize.c:1699 #, c-format msgid "input string '%s' cannot be translated to UTF-8, is it valid in '%s'?" msgstr "" #: src/main/serialize.c:1711 msgid "strings not representable in native encoding will not be translated" msgstr "" #: src/main/serialize.c:1713 msgid "strings not representable in native encoding will be translated to UTF-8" msgstr "" #: src/main/serialize.c:1720 #, c-format msgid "input string '%s' cannot be translated to UTF-8, is it valid in '%s' ?" msgstr "" #: src/main/serialize.c:1732 msgid "negative serialized length for vector" msgstr "向量序列长度不能是负的" #: src/main/serialize.c:1740 msgid "invalid upper part of serialized vector length" msgstr "上部序列向量的长度不对" #: src/main/serialize.c:1745 msgid "" "negative serialized vector length:\n" "perhaps long vector from 64-bit version of R?" msgstr "" "负序列化的向量长度：\n" "也许矢量是从64位版本的R来的？" #: src/main/serialize.c:1980 msgid "this version of R cannot read class references" msgstr "本R版本无法读取类别引用" #: src/main/serialize.c:1982 msgid "this version of R cannot read generic function references" msgstr "本R版本无法读取类属功能引用" #: src/main/serialize.c:2011 #, c-format msgid "ReadItem: unknown type %i, perhaps written by later version of R" msgstr "ReadItem: 不存在%i 这一种类，可能是因为由新的R版本所写的" #: src/main/serialize.c:2170 src/main/serialize.c:2261 #, fuzzy msgid "invalid length of encoding name" msgstr "名字槽的类别或长度不对" #: src/main/serialize.c:2180 #, c-format msgid "cannot read unreleased workspace version %d written by experimental R %d.%d.%d" msgstr "无法从由R实验版本%2$d.%3$d.%4$d写的还未被释放的工作空间版本%1$d中读取数据" #: src/main/serialize.c:2184 #, c-format msgid "cannot read workspace version %d written by R %d.%d.%d; need R %d.%d.%d or newer" msgstr "无法从由R版本%2$d.%3$d.%4$d写的工作空间版本%1$d中读取数据；需要R版本%5$d.%6$d.%7$d以后的版本" #: src/main/serialize.c:2340 msgid "read failed" msgstr "读取失败" #: src/main/serialize.c:2403 msgid "error reading from ascii connection" msgstr "读取ascii链结时发生了错误" #: src/main/serialize.c:2405 msgid "unexpected format in ascii connection" msgstr "ascii链结里出现了意外格式" #: src/main/serialize.c:2410 src/main/serialize.c:2424 msgid "error reading from connection" msgstr "读取链结时发生了错误" #: src/main/serialize.c:2466 msgid "only ascii format can be written to text mode connections" msgstr "只能用ascii格式书写文字状态的链结" #: src/main/serialize.c:2480 msgid "only ascii format can be read from text mode connections" msgstr "只能用ascii格式读取文字状态的链结" #: src/main/serialize.c:2536 src/main/serialize.c:2692 #: src/main/serialize.c:2841 msgid "bad version value" msgstr "版本值不对" #: src/main/serialize.c:2561 msgid "binary-mode connection required for ascii=FALSE" msgstr "二进列链结需要设定ascii=FALSE" #: src/main/serialize.c:2720 src/main/serialize.c:2757 #: src/main/serialize.c:2820 msgid "serialization is too large to store in a raw vector" msgstr "串行太大，无法存储于原始矢量中" #: src/main/serialize.c:2737 msgid "cannot allocate buffer" msgstr "无法分配缓冲区" #: src/main/serialize.c:2933 src/main/serialize.c:3014 msgid "not a proper file name" msgstr "文件名字有错" #: src/main/serialize.c:2937 msgid "not a proper raw vector" msgstr "不是原始矢量" #: src/main/serialize.c:2951 src/main/serialize.c:3043 #: src/main/serialize.c:3056 src/main/serialize.c:3065 #: src/main/serialize.c:3076 src/main/serialize.c:3090 #, c-format msgid "seek failed on %s" msgstr "读取%s失败" #: src/main/serialize.c:2961 msgid "could not determine file position" msgstr "无法确定文件位置" #: src/main/serialize.c:3018 msgid "bad offset/length argument" msgstr "位移/长度参数不对" #: src/main/serialize.c:3060 src/main/serialize.c:3069 #: src/main/serialize.c:3080 src/main/serialize.c:3094 #, c-format msgid "read failed on %s" msgstr "读取%s失败" #: src/main/serialize.c:3114 msgid "bad environment" msgstr "环境有错" #: src/main/serialize.c:3116 msgid "bad variable names" msgstr "变数名字不对" #: src/main/sort.c:95 msgid "only atomic vectors can be tested to be sorted" msgstr "只有基元矢量才能被检验排序" #: src/main/sort.c:420 src/main/sort.c:1432 msgid "'decreasing' must be TRUE or FALSE" msgstr "'increasing'必需是TRUE或是FALSE" #: src/main/sort.c:423 src/main/sort.c:783 msgid "only atomic vectors can be sorted" msgstr "只有基元矢量才能被排序" #: src/main/sort.c:425 src/main/sort.c:785 src/main/sort.c:1501 msgid "raw vectors cannot be sorted" msgstr "无法排序原始矢量" #: src/main/sort.c:796 msgid "NA or infinite index" msgstr "出现了NA或无限大的index " #: src/main/sort.c:799 #, c-format msgid "index %ld outside bounds" msgstr "索引%ld在界限外" #: src/main/sort.c:804 src/main/sort.c:817 msgid "NA index" msgstr "NA索引" #: src/main/sort.c:806 src/main/sort.c:819 #, c-format msgid "index %d outside bounds" msgstr "索引%d在界限外" #: src/main/sort.c:1441 #, c-format msgid "argument %d is not a vector" msgstr "参数%d不是矢量" #: src/main/sort.c:1443 msgid "argument lengths differ" msgstr "参数长度不同" #: src/main/sort.c:1529 msgid "invalid ties.method for rank() [should never happen]" msgstr "rank()的ties.method不对[这是不应该发生的]" #: src/main/source.c:163 #, c-format msgid "%s in \"%s\"" msgstr "%s在\"%s\"里" #: src/main/source.c:167 #, c-format msgid "" "%s in:\n" "\"%s\n" "%s\"" msgstr "" "%s 于\n" "\"%s\n" "%s\"" #: src/main/source.c:216 msgid "coercion of 'text' to character was unsuccessful" msgstr "将'text'强迫改变成字符串失败" #: src/main/source.c:244 msgid "argument encoding=\"latin1\" is ignored in MBCS locales" msgstr "" #: src/main/source.c:252 msgid "argument encoding=\"UTF-8\" is ignored in MBCS locales" msgstr "" #: src/main/source.c:254 #, c-format msgid "argument '%s = \"%s\"' will be ignored" msgstr "略过'%s = \"%s\"'参数值" #: src/main/split.c:39 msgid "first argument must be a vector" msgstr "第一参数必需是矢量" #: src/main/split.c:41 msgid "second argument must be a factor" msgstr "第二参数必需是因子" #: src/main/split.c:46 msgid "group length is 0 but data length > 0" msgstr "组的长度为零但数据的长度大于零" #: src/main/split.c:48 msgid "data length is not a multiple of split variable" msgstr "数据长度不是分割变数的倍数" #: src/main/sprintf.c:98 #, c-format msgid "required resulting string length %d is greater than maximal %d" msgstr "所需要的字符串长度%d大于最大限度%d" #: src/main/sprintf.c:106 msgid "'fmt' is not a character vector" msgstr "'fmt'必需是字符矢量" #: src/main/sprintf.c:111 #, c-format msgid "only %d arguments are allowed" msgstr "只允许%d个参数" #: src/main/sprintf.c:119 #, c-format msgid "invalid type of argument[%d]: '%s'" msgstr "参数[%d] 的种类不对：'%s'" #: src/main/sprintf.c:130 src/main/sprintf.c:133 msgid "arguments cannot be recycled to the same length" msgstr "不是所有的参数都一样长" #: src/main/sprintf.c:155 src/main/sprintf.c:264 #, c-format msgid "'fmt' length exceeds maximal format length %d" msgstr "'fmt'长度超过了缓冲区最大长度%d" #: src/main/sprintf.c:174 #, c-format msgid "unrecognised format specification '%s'" msgstr "没有'%s'这样的格式设定" #: src/main/sprintf.c:185 src/main/sprintf.c:191 src/main/sprintf.c:204 #: src/main/sprintf.c:211 #, c-format msgid "reference to non-existent argument %d" msgstr "不能引用不存在的参数%d" #: src/main/sprintf.c:218 src/main/sprintf.c:251 msgid "too few arguments" msgstr "参数数目太少" #: src/main/sprintf.c:223 msgid "at most one asterisk '*' is supported in each conversion specification" msgstr "每个轉換規格里最多只支持一个'*'号" #: src/main/sprintf.c:234 msgid "argument for '*' conversion specification must be a number" msgstr "轉換規格'*'的参数必需是数字" #: src/main/sprintf.c:274 msgid "coercion has changed vector length to 0" msgstr "矢量长度被強制改变成零" #: src/main/sprintf.c:359 src/main/sprintf.c:373 src/main/sprintf.c:387 #: src/main/sprintf.c:422 #, c-format msgid "invalid format '%s'; %s" msgstr "'%s'的格式不对；%s" #: src/main/sprintf.c:360 #, c-format msgid "use format %d or %i for logical objects" msgstr "逻辑对象使用的格式应该是%d或%i" #: src/main/sprintf.c:374 #, c-format msgid "use format %d, %i, %o, %x or %X for integer objects" msgstr "整数对象使用的格式应该是%d，%i，%o，%x或%X" #: src/main/sprintf.c:388 #, c-format msgid "use format %f, %e, %g or %a for numeric objects" msgstr "数值对象使用的格式应该是%f,%e,%g或%a" #: src/main/sprintf.c:423 #, c-format msgid "use format %s for character objects" msgstr "字符对象使用的格式应该是%s" #: src/main/sprintf.c:428 #, c-format msgid "likely truncation of character string to %d characters" msgstr "字符串很可能被缩短到%d个字符" #: src/main/sprintf.c:437 msgid "unsupported type" msgstr "不支持这一种类" #: src/main/sprintf.c:479 #, fuzzy, c-format msgid "one argument not used by format '%s'" msgstr "'%s'里的参数值在范围外\n" #: src/main/sprintf.c:481 #, fuzzy, c-format msgid "%d arguments not used by format '%s'" msgstr "'%s'里的参数值在范围外\n" #: src/main/sprintf.c:484 #, fuzzy msgid "one argument not used by format" msgstr "第二参数必需是因子" #: src/main/sprintf.c:486 #, fuzzy, c-format msgid "%d arguments not used by format" msgstr "参数不是矩阵" #: src/main/startup.c:69 msgid "R_LibraryFileName: buffer too small" msgstr "R_Library文件名字不对: 缓冲区太小" #: src/main/subassign.c:142 msgid "attempt to enlarge non-vector" msgstr "不能把非矢量变大" #: src/main/subassign.c:147 #, c-format msgid "assignment outside vector/list limits (extending from %d to %d)" msgstr "不能在矢量/串列极限外赋值(%d加大到%d)" #: src/main/subassign.c:267 #, fuzzy msgid "bad names attribute" msgstr "名字空间名字不对" #: src/main/subassign.c:477 #, c-format msgid "incompatible types (from %s to %s) in subassignment type fix" msgstr "下赋值fix种类里有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:657 src/main/subassign.c:962 src/main/subassign.c:1205 msgid "NAs are not allowed in subscripted assignments" msgstr "下标赋值里不允许NA" #: src/main/subassign.c:676 src/main/subassign.c:972 src/main/subassign.c:1197 #: src/main/subassign.c:1836 msgid "replacement has length zero" msgstr "更换参数长度为零" #: src/main/subassign.c:678 src/main/subassign.c:974 src/main/subassign.c:1199 msgid "number of items to replace is not a multiple of replacement length" msgstr "被替换的项目不是替换值长度的倍数" #: src/main/subassign.c:934 msgid "incorrect number of subscripts on matrix" msgstr "矩阵里的下标数目不对" #: src/main/subassign.c:1126 #, c-format msgid "incompatible types (from %s to %s) in matrix subset assignment" msgstr "矩阵子集赋值里有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:1167 src/main/subset.c:984 msgid "incorrect number of subscripts" msgstr "下标数目不对" #: src/main/subassign.c:1360 #, c-format msgid "incompatible types (from %s to %s) in array subset assignment" msgstr "陈列子集赋值有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:1386 src/main/subassign.c:1408 msgid "invalid subscript in list assign" msgstr "串列赋值里的下标不对" #: src/main/subassign.c:1401 msgid "invalid number of subscripts to list assign" msgstr "串列赋值里的下标数目不对" #: src/main/subassign.c:1503 msgid "SubAssignArgs: invalid number of arguments" msgstr "SubAssignArgs: 参数数目不对" #: src/main/subassign.c:1673 msgid "result is zero-length and so cannot be a language object" msgstr "计算结果的长度为零，因此不可能是语言目标对象" #: src/main/subassign.c:1788 msgid "[[<- defined for objects of type \"S4\" only for subclasses of environment" msgstr "给\"S4\"类型的对象所定义的[[<-只能在环境子类内有用" #: src/main/subassign.c:1802 #, fuzzy msgid "improper dimensions" msgstr "量度数目不对" #: src/main/subassign.c:1808 msgid "wrong args for environment subassignment" msgstr "环境下赋值的参数不对" #: src/main/subassign.c:1838 msgid "more elements supplied than there are to replace" msgstr "用来替换的元素比所要替换的值多" #: src/main/subassign.c:1840 msgid "[[ ]] with missing subscript" msgstr "[[ ]] 缺少下标" #: src/main/subassign.c:1865 src/main/subassign.c:2049 msgid "[[ ]] improper number of subscripts" msgstr "[[ ]] 下标数目不对" #: src/main/subassign.c:2015 #, c-format msgid "incompatible types (from %s to %s) in [[ assignment" msgstr " [[ 赋值里有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:2144 msgid "no method for assigning subsets of this S4 class" msgstr "不存在给这个S4类别分配子集的方法" #: src/main/subassign.c:2213 msgid "Coercing LHS to a list" msgstr "把公式左手强迫变成串列" #: src/main/subscript.c:85 src/main/subscript.c:107 src/main/subscript.c:126 #: src/main/subscript.c:220 src/main/subscript.c:246 #, fuzzy, c-format msgid "attempt to select less than one element in %s" msgstr "至少要选择一个元素" #: src/main/subscript.c:89 src/main/subscript.c:104 src/main/subscript.c:130 #: src/main/subscript.c:218 src/main/subscript.c:253 src/main/subscript.c:347 #, fuzzy, c-format msgid "attempt to select more than one element in %s" msgstr "最多只能选择一个元素" #: src/main/subscript.c:189 src/main/subscript.c:320 src/main/subscript.c:985 #: src/main/subscript.c:1069 src/main/subset.c:1216 #, c-format msgid "invalid subscript type '%s'" msgstr "类别为'%s'的下标不对" #: src/main/subscript.c:223 msgid "internal error in use of recursive indexing" msgstr "递回索引在运行时发生了内部错误" #: src/main/subscript.c:245 src/main/subscript.c:252 #, fuzzy, c-format msgid "invalid negative subscript in %s" msgstr "类别为'%s'的下标不对" #: src/main/subscript.c:298 #, c-format msgid "further partial match of '%s' to '%s'" msgstr "'%s'进一部分匹配到'%s'" #: src/main/subscript.c:345 #, c-format msgid "recursive indexing failed at level %d\n" msgstr "递回索引在%d层失败\n" #: src/main/subscript.c:355 #, c-format msgid "no such index at level %d\n" msgstr "在%d层没有这一索引\n" #: src/main/subscript.c:406 msgid "incorrect number of columns in matrix subscript" msgstr "矩阵下标里列的数目不对" #: src/main/subscript.c:426 src/main/subscript.c:445 src/main/subscript.c:470 msgid "negative values are not allowed in a matrix subscript" msgstr "矩阵下标里不能有负数值" #: src/main/subscript.c:552 msgid "(subscript) logical subscript too long" msgstr "(下标)逻辑下标太长" #: src/main/subscript.c:735 src/main/subscript.c:793 msgid "only 0's may be mixed with negative subscripts" msgstr "只有负下标里才能有零" #: src/main/subscript.c:765 msgid "subscript too large for 32-bit R" msgstr "标过大，因为是32位的R " #: src/main/subscript.c:977 msgid "no 'dimnames' attribute for array" msgstr "陈列中没有'dimnames'这一属性" #: src/main/subscript.c:1013 msgid "subscripting on non-vector" msgstr "非矢量不能有下标" #: src/main/subset.c:315 msgid "dimensions would exceed maximum size of array" msgstr "尺寸会超过阵列最大大小" #: src/main/subset.c:357 msgid "matrix subscripting not handled for this type" msgstr "这一种类不能有矩阵下标" #: src/main/subset.c:528 msgid "array subscripting not handled for this type" msgstr "这一种类不能有阵列下标" #: src/main/subset.c:882 msgid "incorrect number of dimensions" msgstr "量度数目不对" #: src/main/subset.c:980 msgid "no index specified" msgstr "没有索引设定" #: src/main/subset.c:990 msgid "this S4 class is not subsettable" msgstr "S4对象不可以取子集" #: src/main/subset.c:997 msgid "wrong arguments for subsetting an environment" msgstr "取子集环境时的参数不对" #: src/main/summary.c:33 #, c-format msgid "invalid 'type' (%s) of argument" msgstr "'type'(%s)参数不对" #: src/main/summary.c:116 msgid "integer overflow - use sum(as.numeric(.))" msgstr "整数上溢-请用sum(as.numeric(.))" #: src/main/summary.c:687 #, c-format msgid "internal error ('op = %d' in do_summary).\t Call a Guru" msgstr "内部错误(do_summary里的'op = %d').\t 请向专家请教" #: src/main/summary.c:843 msgid "Integer overflow - use sum(as.numeric(.))" msgstr "整数上溢；请用sum(as.numeric(.))" #: src/main/summary.c:958 msgid "no non-missing arguments, returning NA" msgstr "所有的参数都不存在; 回覆NA" #: src/main/summary.c:961 msgid "no non-missing arguments to min; returning Inf" msgstr "min里所有的参数都不存在; 回覆Inf" #: src/main/summary.c:963 msgid "no non-missing arguments to max; returning -Inf" msgstr "max里所有的参数都不存在；回覆-Inf" #: src/main/summary.c:1127 msgid "argument to 'which' is not logical" msgstr "参数'which'必需是逻辑值" #: src/main/summary.c:1202 msgid "no arguments" msgstr "没有参数" #: src/main/summary.c:1214 src/main/summary.c:1232 msgid "invalid input type" msgstr "输入种类不对" #: src/main/summary.c:1249 msgid "an argument will be fractionally recycled" msgstr "参数值将数据略微回收" #: src/main/sysutils.c:71 src/main/sysutils.c:85 #, c-format msgid "cannot determine file modification time of '%s'" msgstr "无法确定文件'%s'的修改时间" #: src/main/sysutils.c:175 msgid "encoding of a filename cannot be 'bytes'" msgstr "编码的文件名不能是'bytes'" #: src/main/sysutils.c:178 src/main/sysutils.c:888 src/main/sysutils.c:903 #: src/main/sysutils.c:1110 src/main/sysutils.c:1176 #, c-format msgid "unsupported conversion from '%s' in codepage %d" msgstr "不支持代码页%2$d里由'%1$s'来这种转换" #: src/main/sysutils.c:187 msgid "file name conversion problem -- name too long?" msgstr "转换文件名时出了问题--名字太长了？" #: src/main/sysutils.c:188 msgid "file name conversion problem" msgstr "转换文件名时出了问题" #: src/main/sysutils.c:262 msgid "invalid filename pattern" msgstr "文件名字式样不对" #: src/main/sysutils.c:266 msgid "invalid file extension" msgstr "文件扩展名不对" #: src/main/sysutils.c:268 msgid "no 'pattern'" msgstr "没有'pattern'" #: src/main/sysutils.c:270 msgid "no 'tempdir'" msgstr "没有'tempdir'" #: src/main/sysutils.c:272 msgid "no 'fileext'" msgstr "没有'fileext'" #: src/main/sysutils.c:342 src/unix/sys-unix.c:647 #, fuzzy, c-format msgid "system call failed: %s" msgstr "读取%s失败" #: src/main/sysutils.c:371 src/main/sysutils.c:374 src/main/sysutils.c:465 #: src/main/sysutils.c:467 src/main/sysutils.c:503 msgid "wrong type for argument" msgstr "参数种类不对" #: src/main/sysutils.c:469 msgid "wrong length for argument" msgstr "参数的长度不对" #: src/main/sysutils.c:490 msgid "'Sys.setenv' is not available on this system" msgstr "本系统没有'Sys.setenv'这个功能" #: src/main/sysutils.c:534 msgid "this system cannot unset environment variables: setting to \"\"" msgstr "本系统无法復原环境变量：设成\"\"" #: src/main/sysutils.c:545 msgid "'Sys.unsetenv' is not available on this system" msgstr "本系统没有'Sys.unsetenv'这个功能" #: src/main/sysutils.c:644 #, c-format msgid "unsupported conversion from '%s' to '%s' in codepage %d" msgstr "不支持代码页%3$d里从'%1$s'到'%2$s'的这种转换" #: src/main/sysutils.c:660 msgid "'x' must be a character vector" msgstr "'x'必需是字符矢量" #: src/main/sysutils.c:677 #, fuzzy msgid "'x' must be a character vector or a list of NULL or raw vectors" msgstr "'x'必需是NULL串列或原始矢量" #: src/main/sysutils.c:783 src/main/sysutils.c:1077 src/main/sysutils.c:1246 #, c-format msgid "'%s' must be called on a CHARSXP" msgstr "'%s'只能调用在CHARSXP上" #: src/main/sysutils.c:855 src/main/sysutils.c:1099 src/main/sysutils.c:1165 #: src/main/sysutils.c:1249 msgid "translating strings with \"bytes\" encoding is not allowed" msgstr "不允许用\"bytes\"编码进行字符翻译”" #: src/main/sysutils.c:869 #, fuzzy msgid "internal error: no translation needed" msgstr "unz写码发生了内部错误" #: src/main/sysutils.c:968 src/main/sysutils.c:972 #, fuzzy, c-format msgid "unable to translate '%s' to native encoding" msgstr "无法写入裁剪板" #: src/main/sysutils.c:984 src/main/sysutils.c:1004 src/main/sysutils.c:1025 #: src/main/sysutils.c:1044 src/main/sysutils.c:1093 src/main/sysutils.c:1159 #, fuzzy, c-format msgid "'%s' must be called on a CHARSXP, but got '%s'" msgstr "'%s'只能调用在CHARSXP上" #: src/main/sysutils.c:1208 #, fuzzy, c-format msgid "unable to translate '%s' to UTF-8" msgstr "无法解决'%s'." #: src/main/sysutils.c:1280 #, c-format msgid "unsupported conversion to '%s' from codepage %d" msgstr "不支持从代码页%2$d里到'%1$s'的转换" #: src/main/sysutils.c:1714 #, fuzzy, c-format msgid "invalid Unicode point %u" msgstr "行接合出错" #: src/main/sysutils.c:1823 msgid "'R_TempDir' contains space" msgstr "" #: src/main/sysutils.c:1832 msgid "cannot create 'R_TempDir'" msgstr "无法创建'R_TempDir'" #: src/main/sysutils.c:1837 src/main/sysutils.c:1845 src/main/sysutils.c:1848 msgid "unable to set R_SESSION_TMPDIR" msgstr "无法设制R_SESSION_TMPDIR " #: src/main/sysutils.c:1857 msgid "cannot allocate 'R_TempDir'" msgstr "无法分配'R_TempDir'" #: src/main/sysutils.c:1898 msgid "temporary name too long" msgstr "临时文件名太长" #: src/main/sysutils.c:1913 msgid "cannot find unused tempfile name" msgstr "临时文件名都用完了" #: src/main/sysutils.c:1916 msgid "allocation failed in R_tmpnam2" msgstr "分配R_tmpnam2失败" #: src/main/sysutils.c:2048 msgid "'dirmark = TRUE' is not supported on this platform" msgstr "本平台不支持'dirmark = TRUE'" #: src/main/unique.c:365 src/main/unique.c:368 #, c-format msgid "length %d is too large for hashing" msgstr "雜亂定址法的长度%d太大了" #: src/main/unique.c:555 src/main/unique.c:741 src/main/unique.c:888 #: src/main/unique.c:918 src/main/unique.c:957 msgid "'duplicated' applies only to vectors" msgstr "'duplicated'只适用于矢量" #: src/main/unique.c:962 msgid "any_duplicated3(., <0-length incomp>)" msgstr "any_duplicated3(., <0-length incomp>)" #: src/main/unique.c:1011 msgid "'fromLast' must be length 1" msgstr "'fromLast'的长度必需为一" #: src/main/unique.c:1014 msgid "'fromLast' must be TRUE or FALSE" msgstr "'fromLast'的值必需是TRUE或是FALSE" #: src/main/unique.c:1024 #, c-format msgid "%s() applies only to vectors" msgstr "%s()只适用于矢量" #: src/main/unique.c:1032 msgid "'nmax' must be positive" msgstr "'nmax'的长度必需是正数" #: src/main/unique.c:1404 msgid "'match' requires vector arguments" msgstr "'match'需要矢量参数" #: src/main/unique.c:1453 src/main/unique.c:1591 msgid "argument is not of mode character" msgstr "参数不是字符状态" #: src/main/unique.c:1714 msgid "... used in a situation where it does not exist" msgstr "... 用于了在它不存在的地方" #: src/main/unique.c:1720 #, fuzzy msgid "... is not a pairlist" msgstr "'... '里的值不是允諾" #: src/main/unique.c:1953 msgid "non-numeric data frame in rowsum" msgstr "rowsum里不能有非数值数据框" #: src/main/unique.c:1988 msgid "this cannot happen" msgstr "这不应该发生" #: src/main/unique.c:2059 msgid "'names' must be a character vector" msgstr "'names'必需是字符矢量" #: src/main/util.c:81 src/main/util.c:99 msgid "object is not a matrix" msgstr "对象不是矩阵" #: src/main/util.c:297 src/main/util.c:309 src/main/util.c:320 #: src/main/util.c:333 #, c-format msgid "type %d is unimplemented in '%s'" msgstr "'%2$s'里的%1$d种类还没有被实现" #: src/main/util.c:344 #, c-format msgid "unimplemented type '%s' in '%s'\n" msgstr "种类'%s'目前没有在'%s'里实现\n" #: src/main/util.c:346 #, c-format msgid "unimplemented type (%d) in '%s'\n" msgstr "(%d)种类目前没有在'%s'里实现\n" #: src/main/util.c:472 msgid "invalid tag in name extraction" msgstr "抽取名字的标记不对" #: src/main/util.c:489 #, c-format msgid "%d argument passed to '%s' which requires %d" msgid_plural "%d arguments passed to '%s' which requires %d" msgstr[0] "%d个参数给'%s'，但它只需要%d个" #: src/main/util.c:503 #, c-format msgid "supplied argument name '%s' does not match '%s'" msgstr "提供的参数名'%s'同'%s'不匹配" #: src/main/util.c:513 #, c-format msgid "'nthcdr' list shorter than %d" msgstr "'nthcdr'串列比%d要短" #: src/main/util.c:518 msgid "'nthcdr' needs a list to CDR down" msgstr "'nthcdr'需要CDR串列" #: src/main/util.c:667 msgid "'all.x' must be TRUE or FALSE" msgstr "'all.x'必需是TRUE或FALSE" #: src/main/util.c:669 msgid "'all.y' must be TRUE or FALSE" msgstr "'all.y'必需是TRUE或FALSE" #: src/main/util.c:698 msgid "number of rows in the result exceeds maximum vector length" msgstr "" #: src/main/util.c:790 msgid "missing value is invalid" msgstr "遗漏值不对" #: src/main/util.c:799 src/main/util.c:806 msgid "cannot change working directory" msgstr "无法改变工作目录" #: src/main/util.c:826 src/main/util.c:859 src/main/util.c:900 #: src/main/util.c:943 src/main/util.c:1110 src/main/util.c:1189 #: src/main/util.c:1215 msgid "a character vector argument expected" msgstr "需要字符矢量参数" #: src/main/util.c:1124 msgid "only the first character of 'quote' will be used" msgstr "只用了'quote'的第一个字符" #: src/main/util.c:1217 msgid "a character vector 'value' expected" msgstr "需要字符矢量'value'" #: src/main/util.c:1220 msgid "'value' must be of positive length" msgstr "'value'的长度必需是正数" #: src/main/util.c:1382 src/main/util.c:1395 #, c-format msgid "invalid input '%s' in 'utf8towcs'" msgstr "'utf8towcs'里的输入'%s'不对" #: src/main/util.c:1415 src/main/util.c:1425 #, fuzzy, c-format msgid "invalid input '%s' in 'utf8towcs32'" msgstr "'utf8towcs'里的输入'%s'不对" #: src/main/util.c:1545 #, c-format msgid "invalid multibyte string at '%s'" msgstr "'%s'多字节字符串有错" #: src/main/util.c:1734 msgid "error message truncated to 255 chars" msgstr "错误信息缩短到255个字节" #: src/main/util.c:1752 msgid "warning message truncated to 255 chars" msgstr "警告信息缩短到255个字节" #: src/main/util.c:1924 #, fuzzy msgid "Conversion failed" msgstr "版本值不对" #: src/main/util.c:2042 #, c-format msgid "accuracy loss in conversion from \"%s\" to numeric" msgstr "" #: src/main/util.c:2364 msgid "all arguments must be named" msgstr "所有的参数都必需取名" #: src/main/util.c:2503 msgid "ICU is not supported on this build" msgstr "本平台不支持ICU" #: src/main/util.c:2570 msgid "'breaks' is not sorted" msgstr "'breaks'没有排序" #: src/main/util.c:2604 src/main/util.c:2667 #, c-format msgid "long vector '%s' is not supported" msgstr "不支持'%s'这种长向量" #: src/main/util.c:2725 msgid "'eps.correct' must be 0, 1, or 2" msgstr "'eps.correct' 的值必需是0，1，或2" #: src/main/util.c:2728 #, fuzzy msgid "'bounds' must be TRUE or FALSE" msgstr "'onOff'必需是TRUE或FALSE" #: src/main/util.c:2768 msgid "'x' must be a vector" msgstr "'x'必需是向量" #: src/main/version.c:37 msgid "" "R is free software and comes with ABSOLUTELY NO WARRANTY.\n" "You are welcome to redistribute it under certain conditions.\n" "Type 'license()' or 'licence()' for distribution details.\n" "\n" msgstr "" "R是自由软件，不带任何担保。\n" "在某些条件下你可以将其自由散布。\n" "用'license()'或'licence()'来看散布的详细条件。\n" "\n" #: src/main/version.c:40 msgid "" "R is a collaborative project with many contributors.\n" "Type 'contributors()' for more information and\n" "'citation()' on how to cite R or R packages in publications.\n" "\n" msgstr "" "R是个合作计划，有许多人为之做出了贡献.\n" "用'contributors()'来看合作者的详细情况\n" "用'citation()'会告诉你如何在出版物中正确地引用R或R程序包。\n" "\n" #: src/main/version.c:43 msgid "" "Type 'demo()' for some demos, 'help()' for on-line help, or\n" "'help.start()' for an HTML browser interface to help.\n" "Type 'q()' to quit R.\n" "\n" msgstr "" "用'demo()'来看一些示范程序，用'help()'来阅读在线帮助文件，或\n" "用'help.start()'通过HTML浏览器来看帮助文件。\n" "用'q()'退出R.\n" "\n" #: src/main/xspline.c:60 #, c-format msgid "add_point - reached MAXNUMPTS (%d)" msgstr "add_point-达到了MAXNUMPTS所设定的值(%d)" #: src/main/xspline.c:74 msgid "insufficient memory to allocate point array" msgstr "没有足够的内存以分配给数点排列" #: src/main/xspline.c:472 msgid "there must be at least two control points" msgstr "至少得有两个控制点" #: src/main/xspline.c:474 msgid "there must be at least four control points" msgstr "至少得有四个控制点" #: src/main/xspline.c:534 msgid "There must be at least three control points" msgstr "至少得有三个控制点" #: src/modules/X11/dataentry.c:1876 src/modules/X11/devX11.c:1255 #, c-format msgid "X11 protocol error: %s" msgstr "X11協定错误:%s" #: src/modules/X11/devX11.c:467 msgid "cannot set grayscale: reverting to monochrome" msgstr "无法设灰度: 用黑白颜色" #: src/modules/X11/devX11.c:553 msgid "" "X11 driver unable to obtain color cube\n" " reverting to monochrome" msgstr "X11驱动程序无法打开颜色文块，转用黑白色。" #: src/modules/X11/devX11.c:601 msgid "" "Error: X11 cannot allocate additional graphics colors.\n" "Consider using X11 with colortype=\"pseudo.cube\" or \"gray\"." msgstr "" "错误：X11无法分配额外的图案颜色。\n" "请考虑用colortype=\"pseudo.cube\"或\"gray\"选项来调用X11。" #: src/modules/X11/devX11.c:1036 msgid "" "could not find any X11 fonts\n" "Check that the Font Path is correct." msgstr "" "找不到任何X11字形\n" "请检查字形路径设得是不是对。" #: src/modules/X11/devX11.c:1096 #, c-format msgid "X11 used font size %d when %d was requested" msgstr "虽然需要的是%2$d，但X11却大小为%1$d的字形" #: src/modules/X11/devX11.c:1130 #, c-format msgid "X11 font %s, face %d at size %d could not be loaded" msgstr "无法载入X11字面为%2$d,大小为%3$d的字形%1$s" #: src/modules/X11/devX11.c:1139 msgid "semi-transparency is not supported on this device: reported only once per page" msgstr "这装置不支持半透明输出：每一页只提醒一次" #: src/modules/X11/devX11.c:1263 #, c-format msgid "X11 I/O error while opening X11 connection to '%s'" msgstr "在打开'%s'链结的时候X11 I/O出错" #: src/modules/X11/devX11.c:1280 msgid "X11 fatal IO error: please save work and shut down R" msgstr "X11致命的IO错误: 请保存工作数据，然后重新启动R" #: src/modules/X11/devX11.c:1335 msgid "locale not supported by Xlib: some X ops will operate in C locale" msgstr "Xlib不支持语言环境: 某些X操作指令将在C语言环境中起动" #: src/modules/X11/devX11.c:1336 msgid "X cannot set locale modifiers" msgstr "X无法设定语言环境修飾器" #: src/modules/X11/devX11.c:1340 msgid "no png support in this version of R" msgstr "本R版本不支持png" #: src/modules/X11/devX11.c:1346 msgid "filename too long in png() call" msgstr "png()调用时文件名字太长" #: src/modules/X11/devX11.c:1350 #, c-format msgid "could not open PNG file '%s'" msgstr "无法打开PNG文件'%s'" #: src/modules/X11/devX11.c:1362 msgid "no jpeg support in this version of R" msgstr "本R版本不支持jpeg" #: src/modules/X11/devX11.c:1372 msgid "filename too long in jpeg() call" msgstr "jpeg()调用时文件名字太长" #: src/modules/X11/devX11.c:1376 #, c-format msgid "could not open JPEG file '%s'" msgstr "无法打开JPEG文件'%s'" #: src/modules/X11/devX11.c:1388 msgid "no tiff support in this version of R" msgstr "本R版本不支持tiff" #: src/modules/X11/devX11.c:1396 msgid "filename too long in tiff() call" msgstr "tiff()调用时文件名字太长" #: src/modules/X11/devX11.c:1408 msgid "filename too long in bmp() call" msgstr "bmp()调用时文件名字太长" #: src/modules/X11/devX11.c:1412 #, c-format msgid "could not open BMP file '%s'" msgstr "无法打开BMP文件'%s'" #: src/modules/X11/devX11.c:1442 #, c-format msgid "unable to open connection to X11 display '%s'" msgstr "无法打开链结到X11显示'%s'" #: src/modules/X11/devX11.c:1452 msgid "ignoring 'display' argument as an X11 device is already open" msgstr "因为X11设备已经打开了，'display'参数略过不用" #: src/modules/X11/devX11.c:1458 msgid "cairo-based types may only work correctly on TrueColor visuals" msgstr "以cairo为基础的类型可能只在TrueColor视觉里才能正常工作" #: src/modules/X11/devX11.c:1468 msgid "jpeg() does not support transparency: using white bg" msgstr "jpeg()不支持透明绘图: 用白色的背景" #: src/modules/X11/devX11.c:1573 #, c-format msgid "unable to obtain information on display '%s'" msgstr "找不到关于'%s'显示的信息" #: src/modules/X11/devX11.c:1591 msgid "unable to create X11 window" msgstr "无法建立X11窗口" #: src/modules/X11/devX11.c:1742 #, c-format msgid "'width=%d, height=%d' are unlikely values in pixels" msgstr "'width=%d, height=%d'作为象素值很有可能不对" #: src/modules/X11/devX11.c:1747 msgid "unable to create pixmap" msgstr "无法建立像映" #: src/modules/X11/devX11.c:1778 msgid "invalid font specification" msgstr "字形设定不对" #: src/modules/X11/devX11.c:1818 msgid "font family not found in X11 font database" msgstr "X11字形数据库里没有这一字形家族" #: src/modules/X11/devX11.c:1857 #, c-format msgid "invalid use of %d < 0 in '%s'" msgstr "'%2$s'里%1$d < 0用得不对" #: src/modules/X11/devX11.c:1978 #, c-format msgid "could not open file '%s'" msgstr "无法打开文件'%s'" #: src/modules/X11/devX11.c:2213 #, c-format msgid "%s not available for this device" msgstr "%s不适用于这个设备" #: src/modules/X11/devX11.c:2358 msgid "Unable to create XImage" msgstr "无法建立XImage" #: src/modules/X11/devX11.c:2557 msgid "attempt to use the locator after dev.hold()" msgstr "调用了dev.hold()后就不能再用定位器了" #: src/modules/X11/devX11.c:3204 #, c-format msgid "unable to start device %s" msgstr "无法打开%s设备" #: src/modules/X11/devX11.c:3236 msgid "invalid 'width' or 'height'" msgstr "'width'或'height'不对" #: src/modules/X11/devX11.c:3243 msgid "invalid colortype passed to X11 driver" msgstr "传给X11驅動器的颜色种类不对" #: src/modules/X11/devX11.c:3257 msgid "unknown X11 color/colour model -- using monochrome" msgstr "没有这种X11颜色/颜色模型 --用黑白色的" #: src/modules/X11/devX11.c:3355 msgid "no plot on device to save" msgstr "没有可以保存的设备" #: src/modules/X11/devX11.c:3357 msgid "not an open X11cairo device" msgstr "不是已打开的X11cairo设备" #: src/modules/X11/devX11.c:3366 #, c-format msgid "cannot open file '%s'" msgstr "无法打开文件'%s'" #: src/modules/X11/devX11.c:3383 msgid "savePlot() is not supported on this build" msgstr "本平台不支持savePlot()" #: src/modules/X11/devX11.c:3423 msgid "unable to contact X11 display" msgstr "无法链结到X11显示" #: src/modules/X11/devX11.c:3472 #, c-format msgid "clipboard cannot be read (error code %d)" msgstr "读取裁剪板失败(错误码%d)" #: src/modules/X11/devX11.c:3508 msgid "cannot allocate memory for X11Routines structure" msgstr "无法为X11Routines结构分配内存" #: src/modules/internet/internet.c:94 msgid "the 'wininet' method of url() is deprecated for http:// and https:// URLs" msgstr "" #: src/modules/internet/internet.c:116 msgid "the 'wininet' method of url() is deprecated for ftp:// URLs" msgstr "" #: src/modules/internet/internet.c:127 src/modules/internet/internet.c:519 #, fuzzy, c-format msgid "scheme not supported in URL '%s'" msgstr "'eval'不支持重新启动" #: src/modules/internet/internet.c:202 src/modules/internet/internet.c:206 #: src/modules/internet/internet.c:212 src/modules/internet/internet.c:232 #: src/modules/internet/internet.c:240 src/modules/internet/libcurl.c:957 #: src/modules/internet/libcurl.c:961 src/modules/internet/libcurl.c:968 #: src/modules/internet/libcurl.c:982 src/modules/internet/libcurl.c:991 #: src/modules/internet/libcurl.c:1001 msgid "allocation of url connection failed" msgstr "url链结分配失败" #: src/modules/internet/internet.c:326 msgid "only first element of 'url' argument used" msgstr "只用'url'参数的第一个元素" #: src/modules/internet/internet.c:332 msgid "only first element of 'destfile' argument used" msgstr "只用'destfile'参数的第一个元素" #: src/modules/internet/internet.c:353 src/modules/internet/libcurl.c:624 msgid "Download progress" msgstr "正在下载" #: src/modules/internet/internet.c:378 #, c-format msgid "cannot open URL '%s', reason '%s'" msgstr "无法打开URL'%s'，原因是'%s'" #: src/modules/internet/internet.c:385 src/modules/internet/internet.c:415 #, c-format msgid "cannot open destfile '%s', reason '%s'" msgstr "无法打开目的文件'%s'，原因是'%s'" #: src/modules/internet/internet.c:396 msgid "the 'internal' method for http:// URLs is defunct" msgstr "" #: src/modules/internet/internet.c:404 msgid "the 'wininet' method is deprecated for http:// and https:// URLs" msgstr "" #: src/modules/internet/internet.c:420 src/modules/internet/libcurl.c:655 #, c-format msgid "trying URL '%s'\n" msgstr "试开URL’%s'\n" #: src/modules/internet/internet.c:504 src/modules/internet/libcurl.c:713 #, fuzzy, c-format msgid "downloaded length %0.f != reported length %0.f" msgstr "下载的长度%d不等于报告的长度%d" #: src/modules/internet/internet.c:510 src/modules/internet/libcurl.c:740 #, c-format msgid "cannot open URL '%s'" msgstr "无法打开URL'%s'" #: src/modules/internet/internet.c:515 msgid "the 'wininet' method for ftp:// URLs is defunct" msgstr "" #: src/modules/internet/internet.c:517 msgid "the 'internal' method for ftp:// URLs is defunct" msgstr "" #: src/modules/internet/internet.c:570 src/modules/internet/internet.c:584 #: src/modules/internet/internet.c:676 src/modules/internet/internet.c:685 #, c-format msgid "InternetOpenUrl failed: '%s'" msgstr "InternetOpenUrl失败:’%s'" #: src/modules/internet/internet.c:599 src/modules/internet/libcurl.c:217 #, fuzzy, c-format msgid "cannot open URL '%s': %s status was '%d %s'" msgstr "无法打开: HTTP状态是'%d%s'" #: src/modules/internet/libcurl.c:222 #, c-format msgid "URL '%s': Timeout of %d seconds was reached" msgstr "" #: src/modules/internet/libcurl.c:225 #, c-format msgid "URL '%s': status was '%s'" msgstr "" #: src/modules/internet/libcurl.c:321 #, fuzzy msgid "curlGetHeaders is not supported on this platform" msgstr "本平台不支持nsl()" #: src/modules/internet/libcurl.c:382 src/modules/internet/libcurl.c:384 #, c-format msgid "" "libcurl error code %d:\n" "\t%s\n" msgstr "" #: src/modules/internet/libcurl.c:524 #, fuzzy msgid "download.file(method = \"libcurl\") is not supported on this platform" msgstr "本平台不支持nsl()" #: src/modules/internet/libcurl.c:540 #, fuzzy msgid "lengths of 'url' and 'destfile' must match" msgstr "引进和引出名字的长度必需相等" #: src/modules/internet/libcurl.c:560 src/modules/internet/libcurl.c:578 msgid "out of memory" msgstr "" #: src/modules/internet/libcurl.c:606 #, fuzzy, c-format msgid "URL %s: cannot open destfile '%s', reason '%s'" msgstr "无法打开目的文件'%s'，原因是'%s'" #: src/modules/internet/libcurl.c:736 #, fuzzy msgid "cannot download any files" msgstr "无法打开文件'%s'" #: src/modules/internet/libcurl.c:737 #, fuzzy msgid "some files were not downloaded" msgstr "復原文件可能是空的 -- 没有载入任何数据" #: src/modules/internet/libcurl.c:742 #, c-format msgid "download from '%s' failed" msgstr "" #: src/modules/internet/libcurl.c:885 #, fuzzy msgid "cannot read from connection" msgstr "无法从此链结读取" #: src/modules/internet/libcurl.c:927 #, fuzzy, c-format msgid "cannot open the connection to '%s'" msgstr "无法打开链结" #: src/modules/internet/libcurl.c:1008 #, fuzzy msgid "url(method = \"libcurl\") is not supported on this platform" msgstr "本平台不支持nsl()" #: src/modules/internet/sockconn.c:201 src/modules/internet/sockconn.c:205 #: src/modules/internet/sockconn.c:212 src/modules/internet/sockconn.c:226 msgid "allocation of socket connection failed" msgstr "分配插坐链结失败" #: src/modules/internet/sockconn.c:242 src/modules/internet/sockconn.c:246 #: src/modules/internet/sockconn.c:253 src/modules/internet/sockconn.c:261 #, fuzzy msgid "allocation of server socket connection failed" msgstr "分配插坐链结失败" #: src/modules/internet/sockconn.c:270 #, c-format msgid "creation of server socket failed: port %d cannot be opened" msgstr "" #: src/modules/lapack/Lapack.c:66 src/modules/lapack/Lapack.c:85 #, c-format msgid "argument type[1]='%s' must be a character string of string length 1" msgstr "参数type[1]='%s'必需是长度为一的字符矢量" #: src/modules/lapack/Lapack.c:74 #, c-format msgid "argument type[1]='%s' must be one of 'M','1','O','I','F' or 'E'" msgstr "type[1]='%s'参数必需取'M','1','O','I','F'或'E'其中的一个" #: src/modules/lapack/Lapack.c:91 #, c-format msgid "argument type[1]='%s' must be one of '1','O', or 'I'" msgstr "type[1]='%s'参数必需取'1','O'或'I'其中的一个" #: src/modules/lapack/Lapack.c:131 src/modules/lapack/Lapack.c:138 #: src/modules/lapack/Lapack.c:197 src/modules/lapack/Lapack.c:208 #: src/modules/lapack/Lapack.c:289 src/modules/lapack/Lapack.c:295 #: src/modules/lapack/Lapack.c:631 src/modules/lapack/Lapack.c:637 #: src/modules/lapack/Lapack.c:691 src/modules/lapack/Lapack.c:698 #: src/modules/lapack/Lapack.c:703 src/modules/lapack/Lapack.c:738 #: src/modules/lapack/Lapack.c:745 src/modules/lapack/Lapack.c:794 #: src/modules/lapack/Lapack.c:801 src/modules/lapack/Lapack.c:849 #: src/modules/lapack/Lapack.c:855 src/modules/lapack/Lapack.c:910 #: src/modules/lapack/Lapack.c:917 src/modules/lapack/Lapack.c:1155 #: src/modules/lapack/Lapack.c:1161 src/modules/lapack/Lapack.c:1207 #: src/modules/lapack/Lapack.c:1214 src/modules/lapack/Lapack.c:1219 #: src/modules/lapack/Lapack.c:1247 src/modules/lapack/Lapack.c:1254 #: src/modules/lapack/Lapack.c:1274 #, c-format msgid "error code %d from Lapack routine '%s'" msgstr "Lapack例行程序'%2$s'回复了%1$d错误代码" #: src/modules/lapack/Lapack.c:168 src/modules/lapack/Lapack.c:262 #: src/modules/lapack/Lapack.c:889 msgid "'x' must be a square numeric matrix" msgstr "'x'必需是正方形的数值矩阵" #: src/modules/lapack/Lapack.c:339 src/modules/lapack/Lapack.c:369 #: src/modules/lapack/Lapack.c:418 msgid "'A' must be a numeric matrix" msgstr "'A'必需是数值矩阵" #: src/modules/lapack/Lapack.c:341 msgid "'type' must be a character string" msgstr "'type'必需为字符串" #: src/modules/lapack/Lapack.c:371 src/modules/lapack/Lapack.c:419 #: src/modules/lapack/Lapack.c:455 src/modules/lapack/Lapack.c:512 msgid "'norm' must be a character string" msgstr "'norm'必需是字符串" #: src/modules/lapack/Lapack.c:391 #, c-format msgid "error [%d] from Lapack 'dgetrf()'" msgstr "Lapack例行程序'dgetrf()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:396 #, c-format msgid "exact singularity: U[%d,%d] = 0 in LU-decomposition {Lapack 'dgetrf()'}" msgstr "精密奇异：LU-分解里产生了U[%d,%d] = 0 {Lapack 'dgetrf()'}" #: src/modules/lapack/Lapack.c:408 #, c-format msgid "error [%d] from Lapack 'dgecon()'" msgstr "Lapack例行程序'dgecon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:428 src/modules/lapack/Lapack.c:460 #: src/modules/lapack/Lapack.c:518 msgid "'A' must be a *square* matrix" msgstr "'A'必需是*正方形*矩阵" #: src/modules/lapack/Lapack.c:442 #, c-format msgid "error [%d] from Lapack 'dtrcon()'" msgstr "Lapack例行程序'dtrcon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:457 src/modules/lapack/Lapack.c:514 msgid "'A' must be a complex matrix" msgstr "'A'必需是复数矩阵" #: src/modules/lapack/Lapack.c:479 src/modules/lapack/Lapack.c:486 #, c-format msgid "error [%d] from Lapack 'zgetrf()'" msgstr "Lapack例行程序'zgetrf()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:494 #, c-format msgid "error [%d] from Lapack 'zgecon()'" msgstr "Lapack例行程序'zgecon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:498 src/modules/lapack/Lapack.c:533 #: src/modules/lapack/Lapack.c:602 src/modules/lapack/Lapack.c:662 #: src/modules/lapack/Lapack.c:707 src/modules/lapack/Lapack.c:749 #: src/modules/lapack/Lapack.c:815 src/modules/lapack/Lapack.c:872 #: src/modules/lapack/Lapack.c:934 msgid "Fortran complex functions are not available on this platform" msgstr "本平台不能用Fortran复数功能" #: src/modules/lapack/Lapack.c:530 #, c-format msgid "error [%d] from Lapack 'ztrcon()'" msgstr "Lapack例行程序'ztrcon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:546 src/modules/lapack/Lapack.c:616 msgid "'a' must be a complex matrix" msgstr "'a'必需是复数矩阵" #: src/modules/lapack/Lapack.c:549 src/modules/lapack/Lapack.c:1061 msgid "'a' is 0-diml" msgstr "'a'是0-diml" #: src/modules/lapack/Lapack.c:551 src/modules/lapack/Lapack.c:1063 #, c-format msgid "'a' (%d x %d) must be square" msgstr "'a'(%d x %d)必需是正方形的" #: src/modules/lapack/Lapack.c:557 src/modules/lapack/Lapack.c:1069 msgid "no right-hand side in 'b'" msgstr "'b'在等号右手没有公式" #: src/modules/lapack/Lapack.c:560 src/modules/lapack/Lapack.c:574 #: src/modules/lapack/Lapack.c:1072 src/modules/lapack/Lapack.c:1088 #, c-format msgid "'b' (%d x %d) must be compatible with 'a' (%d x %d)" msgstr "'b' (%d x %d)必需与'a'(%d x %d)相容" #: src/modules/lapack/Lapack.c:595 src/modules/lapack/Lapack.c:965 #: src/modules/lapack/Lapack.c:980 src/modules/lapack/Lapack.c:1036 #: src/modules/lapack/Lapack.c:1110 #, c-format msgid "argument %d of Lapack routine %s had invalid value" msgstr "Lapack例行程序%2$s里的%1$d参数值不对" #: src/modules/lapack/Lapack.c:598 #, fuzzy msgid "Lapack routine zgesv: system is exactly singular" msgstr "Lapack例行程序%s: 系统正好是奇异的: U[%d,%d] = 0" #: src/modules/lapack/Lapack.c:676 src/modules/lapack/Lapack.c:722 msgid "'b' must be a complex matrix" msgstr "'b'必需是复数矩阵" #: src/modules/lapack/Lapack.c:684 src/modules/lapack/Lapack.c:731 #: src/modules/lapack/Lapack.c:1199 src/modules/lapack/Lapack.c:1240 #, c-format msgid "right-hand side should have %d not %d rows" msgstr "公式右手应该有%d而不是%d行" #: src/modules/lapack/Lapack.c:758 #, fuzzy msgid "'jobu' must be a character string" msgstr "'norm'必需是字符串" #: src/modules/lapack/Lapack.c:766 msgid "matrices of 2^31 or more elements are not supported" msgstr "不支持2 ^ 31个或更多的元素矩阵" #: src/modules/lapack/Lapack.c:831 msgid "'x' must be a square complex matrix" msgstr "'x'必需是正方形的复数矩阵" #: src/modules/lapack/Lapack.c:943 src/modules/lapack/Lapack.c:1019 #: src/modules/lapack/Lapack.c:1058 src/modules/lapack/Lapack.c:1135 #: src/modules/lapack/Lapack.c:1265 msgid "'a' must be a numeric matrix" msgstr "'a'必需是数值矩阵" #: src/modules/lapack/Lapack.c:950 src/modules/lapack/Lapack.c:1270 msgid "'a' must be a square matrix" msgstr "'a'必需是正方形矩阵" #: src/modules/lapack/Lapack.c:951 msgid "'a' must have dims > 0" msgstr "'a'的dims必需大于零" #: src/modules/lapack/Lapack.c:963 #, c-format msgid "the leading minor of order %d is not positive definite" msgstr "%d数位主次为非正定" #: src/modules/lapack/Lapack.c:978 msgid "the matrix is either rank-deficient or indefinite" msgstr "矩阵的秩亏或不确定" #: src/modules/lapack/Lapack.c:1006 msgid "'size' argument must be a positive integer" msgstr "'size'参数必需是正整数" #: src/modules/lapack/Lapack.c:1021 #, c-format msgid "'size' cannot exceed ncol(x) = %d" msgstr "'size'不能超过ncol(x)=%d" #: src/modules/lapack/Lapack.c:1022 #, c-format msgid "'size' cannot exceed nrow(x) = %d" msgstr "'size'不能超过nrow(x)=%d" #: src/modules/lapack/Lapack.c:1034 #, c-format msgid "element (%d, %d) is zero, so the inverse cannot be computed" msgstr "元素(%d,%d)为零, 因此无法求逆" #: src/modules/lapack/Lapack.c:1113 #, c-format msgid "Lapack routine %s: system is exactly singular: U[%d,%d] = 0" msgstr "Lapack例行程序%s: 系统正好是奇异的: U[%d,%d] = 0" #: src/modules/lapack/Lapack.c:1123 #, c-format msgid "system is computationally singular: reciprocal condition number = %g" msgstr "系统计算上是奇异的: 倒条件数=%g" #: src/modules/lapack/Lapack.c:1190 src/modules/lapack/Lapack.c:1232 msgid "'b' must be a numeric matrix" msgstr "'b'必需是数值矩阵" #: src/modules/lapack/Lapack.c:1266 msgid "argument 'logarithm' must be logical" msgstr "参数'logarithm'必需是逻辑值" #: src/nmath/bessel_i.c:69 msgid "bessel_i allocation error" msgstr "bessel_i分配错误" #: src/nmath/bessel_i.c:77 src/nmath/bessel_i.c:122 #, fuzzy, c-format msgid "bessel_i(%g): ncalc (=%d) != nb (=%d); alpha=%g. Arg. out of range?\n" msgstr "bessel_i(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 参数在范围外?\n" #: src/nmath/bessel_i.c:80 src/nmath/bessel_i.c:125 #, c-format msgid "bessel_i(%g,nu=%g): precision lost in result\n" msgstr "bessel_i(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/bessel_j.c:64 src/nmath/bessel_j.c:118 #, c-format msgid "besselJ(x, nu): nu=%g too large for bessel_j() algorithm" msgstr "" #: src/nmath/bessel_j.c:72 msgid "bessel_j allocation error" msgstr "Bessel_j分配错误" #: src/nmath/bessel_j.c:80 src/nmath/bessel_j.c:127 #, fuzzy, c-format msgid "bessel_j(%g): ncalc (=%d) != nb (=%d); alpha=%g. Arg. out of range?\n" msgstr "bessel_j(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 参数在范围外?\n" #: src/nmath/bessel_j.c:83 src/nmath/bessel_j.c:130 #, c-format msgid "bessel_j(%g,nu=%g): precision lost in result\n" msgstr "bessel_j(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/bessel_k.c:63 msgid "bessel_k allocation error" msgstr "bessel_k分配错误" #: src/nmath/bessel_k.c:71 src/nmath/bessel_k.c:108 #, fuzzy, c-format msgid "bessel_k(%g): ncalc (=%d) != nb (=%d); alpha=%g. Arg. out of range?\n" msgstr "bessel_k(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 参数在范围外?\n" #: src/nmath/bessel_k.c:74 src/nmath/bessel_k.c:111 #, c-format msgid "bessel_k(%g,nu=%g): precision lost in result\n" msgstr "bessel_k(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/bessel_y.c:63 src/nmath/bessel_y.c:125 #, c-format msgid "besselY(x, nu): nu=%g too large for bessel_y() algorithm" msgstr "" #: src/nmath/bessel_y.c:71 msgid "bessel_y allocation error" msgstr "bessel_y分配错误" #: src/nmath/bessel_y.c:87 src/nmath/bessel_y.c:136 #, fuzzy, c-format msgid "bessel_y(%g): ncalc (=%d) != nb (=%d); alpha=%g. Arg. out of range?\n" msgstr "bessel_y(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 参数在范围外?\n" #: src/nmath/bessel_y.c:90 src/nmath/bessel_y.c:139 #, c-format msgid "bessel_y(%g,nu=%g): precision lost in result\n" msgstr "bessel_y(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/choose.c:79 src/nmath/choose.c:122 #, c-format msgid "'k' (%.2f) must be integer, rounded to %.0f" msgstr "'k' (%.2f)必需是整数，四舍五入时到%.0f" #: src/nmath/nmath.h:157 #, c-format msgid "argument out of domain in '%s'\n" msgstr "'%s'里的参数值在范围外\n" #: src/nmath/nmath.h:160 #, c-format msgid "value out of range in '%s'\n" msgstr "'%s'里的值在范围外\n" #: src/nmath/nmath.h:163 #, c-format msgid "convergence failed in '%s'\n" msgstr "'%s'收敛失败\n" #: src/nmath/nmath.h:166 #, c-format msgid "full precision may not have been achieved in '%s'\n" msgstr "'%s'可能达不到全精度\n" #: src/nmath/nmath.h:169 #, c-format msgid "underflow occurred in '%s'\n" msgstr "'%s'下溢\n" #: src/nmath/pbeta.c:64 #, fuzzy, c-format msgid "pbeta_raw(%g, a=%g, b=%g, ..) -> bratio() gave error code %d" msgstr "pbeta_raw() -> bratio()得到了错误代码%d" #: src/nmath/pnbinom.c:82 #, c-format msgid "pnbinom_mu() -> bratio() gave error code %d" msgstr "pnbinom_mu() -> bratio()得到了错误代码%d " #: src/nmath/pnchisq.c:304 #, fuzzy, c-format msgid "pnchisq(x=%g, f=%g, theta=%g, ..): not converged in %d iter." msgstr "pnchisq(x=%g, ..):%d次循环后还没有聚合." #: src/nmath/polygamma.c:499 #, c-format msgid "deriv = %d > %d (= n_max)\n" msgstr "deriv = %d > %d (= n_max)\n" #: src/nmath/rmultinom.c:78 #, c-format msgid "rbinom: probability sum should be 1, but is %g" msgstr "rbinom: 机率和应该为一, 而不是%g" #: src/nmath/signrank.c:77 msgid "signrank allocation error" msgstr "signrank分配错误" #: src/nmath/snorm.c:326 #, c-format msgid "norm_rand(): invalid N01_kind: %d\n" msgstr "norm_rand(): N01_kind:%d不对\n" #: src/nmath/wilcox.c:85 src/nmath/wilcox.c:95 src/nmath/wilcox.c:148 #: src/nmath/wilcox.c:313 #, c-format msgid "wilcox allocation error %d" msgstr "wilcox分配错误%d" #: src/unix/X11.c:54 msgid "X11 module is not available under this GUI" msgstr "GUI里没有X11模块" #: src/unix/X11.c:60 msgid "X11 routines cannot be accessed in module" msgstr "模块没有X11例行程序" #: src/unix/X11.c:78 src/unix/X11.c:90 src/unix/X11.c:102 src/unix/X11.c:113 msgid "X11 module cannot be loaded" msgstr "无法载入X11模块" #: src/unix/X11.c:144 src/unix/X11.c:150 src/unix/X11.c:156 src/unix/X11.c:162 msgid "X11 is not available" msgstr "没有X11平台这一功能" #: src/unix/dynload.c:108 msgid "Explicit local dynamic loading not supported on this platform. Using default." msgstr "本系统不支持明晰本地动态载入。用缺席值。" #: src/unix/dynload.c:109 msgid "Explicit global dynamic loading not supported on this platform. Using default." msgstr "本系统不支持明晰整体动态载入。用缺席值。" #: src/unix/dynload.c:110 msgid "Explicit non-lazy dynamic loading not supported on this platform. Using default." msgstr "本系统不支持明晰非缓慢动态载入。用缺席值。" #: src/unix/dynload.c:111 msgid "Explicit lazy dynamic loading not supported on this platform. Using default." msgstr "本系统不支持明晰缓慢动态载入。用缺席值。" #: src/unix/dynload.c:202 msgid "cannot get working directory!" msgstr "找不到工作目录" #: src/unix/sys-std.c:586 msgid "An unusual circumstance has arisen in the nesting of readline input. Please report using bug.report()" msgstr "读行输入嵌套出了不寻常的错，请用bug.report()" #: src/unix/sys-std.c:1229 src/unix/sys-std.c:1398 #, c-format msgid "problem in saving the history file '%s'" msgstr "在保存履历文件'%s'时出了问题" #: src/unix/sys-std.c:1305 #, c-format msgid "" "Cannot open file '%s': %s\n" "\n" msgstr "无法打开文件'%s': %s\n" #: src/unix/sys-std.c:1313 src/unix/sys-unix.c:795 src/unix/sys-unix.c:832 #: src/unix/system.c:582 msgid "error in running command" msgstr "调用命令时发生了错误" #: src/unix/sys-std.c:1369 src/unix/sys-std.c:1392 msgid "'file' argument is too long" msgstr "'file'参数太长" #: src/unix/sys-std.c:1375 src/unix/sys-std.c:1377 msgid "no history mechanism available" msgstr "没有历史功能" #: src/unix/sys-std.c:1404 msgid "problem in truncating the history file" msgstr "截短履历文件时出了问题" #: src/unix/sys-std.c:1406 src/unix/sys-std.c:1408 msgid "no history available to save" msgstr "没有可以保存的历史" #: src/unix/sys-std.c:1420 msgid "invalid timestamp" msgstr "时间标签不对" #: src/unix/sys-unix.c:670 #, c-format msgid "running command '%s' had status %d and error message '%s'" msgstr "运行命令'%s'的状态是%d：错误消息是'%s'" #: src/unix/sys-unix.c:685 msgid "non-empty character argument expected" msgstr "需要非空字符参数" #: src/unix/sys-unix.c:688 msgid "'intern' must be logical and not NA" msgstr "'intern’必需是逻辑值而不是NA" #: src/unix/sys-unix.c:733 #, c-format msgid "cannot popen '%s', probable reason '%s'" msgstr "无法popen'%s'，原因可能是'%s'" #: src/unix/sys-unix.c:747 #, c-format msgid "line %d may be truncated in call to system(, intern = TRUE)" msgstr "调用system(, intern = TRUE)时%d行可能会被截断" #: src/unix/sys-unix.c:793 #, c-format msgid "error in running command: '%s'" msgstr "运行命令时出错：'%s'" #: src/unix/sys-unix.c:911 msgid "Sys.info() is not implemented on this system" msgstr "本系统没有实现Sys.info()这一功能" #: src/unix/system.c:357 #, c-format msgid "WARNING: --gui or -g without value ignored" msgstr "警告: --gui或-g选项没有值，因此略过不用" #: src/unix/system.c:375 #, c-format msgid "WARNING: unknown gui '%s', using X11\n" msgstr "警告: 没有这种gui ’%s', 用X11\n" #: src/unix/system.c:378 #, c-format msgid "WARNING: unknown gui '%s', using none\n" msgstr "警告: 没有这种gui ’%s', 因此什么都不用\n" #: src/unix/system.c:414 #, c-format msgid "path given in -f/--file is too long" msgstr "" #: src/unix/system.c:486 msgid "creating temporary file for '-e' failed" msgstr "为'-e'建立临时文件失败" #: src/unix/system.c:572 msgid "WARNING: Only editing the first in the list of files" msgstr "警告: 只修改文件串列中的第一个元素" #~ msgid "incorrect argument" #~ msgstr "参数不对" #~ msgid "don't be silly!: your machine has a 4Gb address limit" #~ msgstr "不要愚蠢!: 你的机器有4Gb的地址上限" #~ msgid "cannot decrease memory limit: ignored" #~ msgstr "无法减少内存极限：忽视不用" #~ msgid "invalid input in 'Rmbstowcs'" #~ msgstr "'Rmbstowcs'里的输入不对" #, c-format #~ msgid "WARNING: R_MAX_MEM_SIZE value is invalid: ignored\n" #~ msgstr "警告: R_MAX_MEM_SIZE的值不对: 略过不用\n" #~ msgid "WARNING: no max-mem-size given\n" #~ msgstr "警告: 没有设定max-mem-size\n" #, c-format #~ msgid "WARNING: --max-mem-size value is invalid: ignored\n" #~ msgstr "警告: --max-mem-size值不对: 略过不用\n" #, c-format #~ msgid "WARNING: --max-mem-size=%lu%c: too large and ignored\n" #~ msgstr "警告: --max-mem-size=%lu%c: 太大，略过不用\n" #, c-format #~ msgid "WARNING: --max-mem-size=%4.1fM: too small and ignored\n" #~ msgstr "警告: --max-mem-size=%4.1fM太小，略过不用\n" #, c-format #~ msgid "WARNING: --max-mem-size=%4.0fM: too large and taken as %uM\n" #~ msgstr "警告: --max-mem-size=%4.0fM太大，当作%uM来用\n" #, fuzzy, c-format #~ msgid "relative range of values (%4.0f * EPS) is small (axis %d)" #~ msgstr "相对范围值=%4.0f * EPS太小(座标%d)" #~ msgid "zero-length inputs cannot be mixed with those of non-zero length" #~ msgstr "零长度输入和非零长度输入是不能混合在一起用的" #~ msgid "[[ ]] subscript out of bounds" #~ msgstr "[[ ]] 下标在界限外" #, c-format #~ msgid "[[ ]] subscript (%d) out of bounds" #~ msgstr "[[ ]] 下标(%d)在界限外" #, fuzzy #~ msgid "could not allocate memory for http headers" #~ msgstr "无法为'read.dcf'分配内存" #~ msgid "removing FTP proxy info" #~ msgstr "删除FTP代理主机信息" #, c-format #~ msgid "using FTP proxy '%s'" #~ msgstr "用FTP代理主机'%s'" #~ msgid "cannot resolve host" #~ msgstr "无法分辨主机" #~ msgid "failed to connect to server" #~ msgstr "连接不上伺服器" #~ msgid "failed to get response from server" #~ msgstr "伺服器没有反应" #~ msgid "RxmlNanoFTPGetConnection: failed to create socket" #~ msgstr "RxmlNanoFTPGetConnection: 建立插坐失败" #~ msgid "failed to create a data connection" #~ msgstr "建立数据链结失败" #~ msgid "failed to bind a port" #~ msgstr "连接通訊埠失败" #, c-format #~ msgid "could not listen on port %d" #~ msgstr "无法从通訊埠%d听取数据" #~ msgid "removing HTTP proxy info" #~ msgstr "删除HTTP代理主机信息" #, c-format #~ msgid "using HTTP proxy '%s'" #~ msgstr "用HTTP代理主机'%s'" #, c-format #~ msgid "unable to resolve '%s'" #~ msgstr "无法解决'%s'." #, c-format #~ msgid "connected to '%s' on port %d." #~ msgstr "由通訊埠%2$d接通到'%1$s'." #, c-format #~ msgid "unable to connect to '%s' on port %d." #~ msgstr "无法通过通訊埠%2$d连接到'%1$s'." #, c-format #~ msgid "redirect to: '%s'" #~ msgstr "重新寄送到: '%s'" #~ msgid "too many redirects, aborting ..." #~ msgstr "太多重新寄送，中断工作 ..." #~ msgid "(list) object cannot be coerced to type '%s'" #~ msgstr "(串列)对象不能强制改变成'%s'种类" #~ msgid "(symbol) object cannot be coerced to type '%s'" #~ msgstr "(符号)对象不能强制改变成'%s'种类" #~ msgid "'con' is not a rawConnection" #~ msgstr "'con'不是rawConnection" #~ msgid "'con' is not a textConnection" #~ msgstr "'con'不是链结" #~ msgid "only first string in char vector used in .Fortran" #~ msgstr ".Fortran只能用字节矢量中的第一个字符串" #~ msgid "invalid cached value in R_GetGlobalCache" #~ msgstr "R_GetGlobalCache里的高速缓存值不对" #~ msgid "integer stack overflow" #~ msgstr "整数堆叠上溢" #~ msgid "unable to allocate buffer for long string at line %d" #~ msgstr "%d行无法为长字符串分配内存" #~ msgid "invalid split pattern '%s'" #~ msgstr "split的式样'%s'不对" #~ msgid "invalid 'width' parameter, allowed %d...%d" #~ msgstr "'width'参数不对，可用%d...%d" #~ msgid "'expressions' parameter invalid, allowed %d...%d" #~ msgstr "'expressions'参数不对，，可用%d...%d" #~ msgid "non-string argument to internal 'paste'" #~ msgstr "内部'paste'的参数不是字符串" #~ msgid "first argument must be atomic" #~ msgstr "第一个参数必需是基元" #~ msgid "problem reading dir %ls: %s" #~ msgstr "读取文件目录%ls时出了问题：%s" #~ msgid "over-long path length" #~ msgstr "路径长度太长了" #~ msgid "non-function argument to .Internal(print.function(.))" #~ msgstr ".Internal(print.function(.))参数是非函数" #~ msgid "invalid 'tryS4' internal argument" #~ msgstr "'tryS4'内部参数不对" #~ msgid "interrupt handler must not return" #~ msgstr "中断處置程式不能有回覆值" #~ msgid "non-conformable time-series" #~ msgstr "非整合时间系列" #~ msgid "class '%s' has no 'names' slot" #~ msgstr "'%s'种类没有'names'这个的槽 " #~ msgid "class '%s' has no 'names' slot; assigning a names attribute will create an invalid object" #~ msgstr "'%s'种类没有'names'这个槽；在为其分配名称属性时会创建一个无效对象" #~ msgid "deparse of an S4 object will not be source()able" #~ msgstr "反向分析S4目标对象是不能被source()" #~ msgid "binary operation on non-conformable arrays" #~ msgstr "二进列运算不能在非整合陈列上进行" #~ msgid "non-conformable time series" #~ msgstr "非整合时间系列" #~ msgid "use 'is()' instead of 'inherits()' on S4 objects" #~ msgstr "对S4目标对象请用'is()'而不是'inherits()'" #~ msgid "incorrect type for second argument" #~ msgstr "第二参数种类不对" #~ msgid "'from' must be finite" #~ msgstr "'from'的值必需是有限的" #~ msgid "'to' must be finite" #~ msgstr "'to'的值必需是有限的" #~ msgid "'by' must be finite" #~ msgstr "'by'的值必需是有限的" #~ msgid "factor has bad level" #~ msgstr "因子的水平不对" #, fuzzy #~ msgid "URL '%s': status was '%d %s'" #~ msgstr "无法打开: HTTP状态是'%d%s'" #, fuzzy #~ msgid "cannot open connection" #~ msgstr "无法打开链结" #~ msgid "RxmlNanoFTPScanURL: overlong (invalid?) URL" #~ msgstr "RxmlNanoFTPScanURL: URL太长了(或格式不对？)" #~ msgid "RxmlNanoFTPScanProxy: overlong (invalid?) URL" #~ msgstr "RxmlNanoFTPScanProxy: URL太长了(或格式不对？)" #~ msgid "RxmlNanoHTTPScanURL: overlong (invalid?) URL" #~ msgstr "RxmlNanoHTTPScanURL: URL太长了(或格式不对？)" #~ msgid "RxmlNanoHTTPScanProxy: overlong (invalid?) URL" #~ msgstr "RxmlNanoHTTPScanProxy: URL太长了(或格式不对？)" #~ msgid "'what' must be a character string or a function" #~ msgstr "'what'必需是字符串或函数" #~ msgid "sockets are not available on this system" #~ msgstr "本系统没有插坐这个功能" #~ msgid "no function to restart" #~ msgstr "没有重新开始的功能" #~ msgid "argument must be a closure" #~ msgstr "参数必需为闭合" #~ msgid "'hostname' must be a character vector of length 1" #~ msgstr "'hostname'必需是长度为一的字符矢量" #~ msgid "nsl() was unable to resolve host '%s'" #~ msgstr "nsl()无法分辨主机'%s'" #~ msgid "unknown format returned by C function 'gethostbyname'" #~ msgstr "'gethostbyname'回覆了错误的格式" #~ msgid "nsl() is not supported on this platform" #~ msgstr "本平台不支持nsl()" #~ msgid "too large a range of values in 'x'" #~ msgstr "'x'里的值的范围太大" #~ msgid "non-numeric argument" #~ msgstr "非数值参数" #~ msgid "unsupported URL scheme" #~ msgstr "不支持这种URL方案" #~ msgid "'dimnames' must be a list" #~ msgstr "'dimnames'必需是串列" #~ msgid "'args' must be a list" #~ msgstr "'args'必需是串列" #~ msgid "binary operations require two arguments" #~ msgstr "二进列运算需要两个参数" #~ msgid "opened URL\n" #~ msgstr "打开了URL\n" #~ msgid "internet routines were already initialized" #~ msgstr "互联网例行程序已经打开了" #~ msgid "'msg1' must be a character string" #~ msgstr "'msg1’必需是字符串" #~ msgid "'msg2' must be a character string" #~ msgstr "'msg2’必需是字符串" #~ msgid "argument 'code' must be a character string" #~ msgstr "参数'code'必需是字符串" #~ msgid "argument 'type' must be a character string" #~ msgstr "参数'type'必需是字符串" #~ msgid "InternetOpenUrl timed out" #~ msgstr "InternetOpenUrl超时" #~ msgid "Internet read timed out" #~ msgstr "互联网读取超时" #~ msgid "unable to find a closure from within which 'match.call' was called" #~ msgstr "找不到调用'match.call'的闭合" #~ msgid "vfont routines cannot be accessed in module" #~ msgstr "模块里没有vfont例行程序" #~ msgid "Hershey fonts cannot be loaded" #~ msgstr "无法载入Hershey字形" #~ msgid "invalid generic function in 'usemethod'" #~ msgstr "'usemethod'里类属功能无效" #~ msgid "'UseMethod' called from outside a function" #~ msgstr "不能在函数外调用'UseMethod' " #~ msgid "first argument must be a generic name" #~ msgstr "第一参数必需是类属名" #~ msgid "explicit request not to duplicate arguments in call to '%s', but argument %d is of the wrong type (%d != %d)" #~ msgstr "调用'%s'时明确要求不要复制参数，但参数%d的种类不对(%d != %d)" #~ msgid "single values not returned if not duplicated" #~ msgstr "如果不重复的话，单值没有返回" #~ msgid "character variables must be duplicated in .C/.Fortran" #~ msgstr "在调用.C/.Fortran时字符变数必需被复制" #~ msgid "call name too long in '%s'" #~ msgstr "'%s'里调用的名字太长" #~ msgid "generic name too long in '%s'" #~ msgstr "'%s'里的类属名字太长" #~ msgid "method name too long in '%s'" #~ msgstr "'%s'里的方法名字太长" #~ msgid "%d arguments passed to 'log' which requires 1 or 2" #~ msgstr "给了'log'%d个参数，但它最多只能用两个参数" #~ msgid "" #~ "Warning in %s :\n" #~ " %s\n" #~ msgstr "" #~ "%s里有警告:\n" #~ " %s\n" #~ msgid "input" #~ msgstr "输入" #~ msgid "symbol" #~ msgstr "符号" #~ msgid "assignment" #~ msgstr "任务" #~ msgid "negative value in 'x'" #~ msgstr "'x'里有负值" #~ msgid "'jobu' and 'jobv' must be character strings" #~ msgstr "'jobu'和'jobv'必需是字符对象" #~ msgid "" #~ "bad target context--should NEVER happen;\n" #~ "please bug.report() [R_run_onexits]" #~ msgstr "" #~ "目标上下文出了错，这是不应该发生的\n" #~ "请用bug.report() [R_run_onexits]" #~ msgid "invalid assignment left-hand side" #~ msgstr "赋值公式左手不对" #, fuzzy #~ msgid "\"%s\" is not an existing slot in an object of class \"%s\"" #~ msgstr "\"%1$s\"槽名不存在于\"%2$s\"类别对象中" #~ msgid "R_CompiledFileName: buffer too small" #~ msgstr "R_CompiledFileName: 缓冲区太小" #~ msgid ".C(..): Width cannot be zero" #~ msgstr ".C(..): 宽度不能为0" #~ msgid ".C(..): 'type' must be \"integer\" for \"d\"-format" #~ msgstr ".C(..):’type’如果用作\"d\"格式的话必需为\"integer\"" #~ msgid ".C(..): 'type' must be \"real\" for this format" #~ msgstr ".C(..):’type’必需为\"real\"才能用这种格式" #~ msgid "'names' is not a character string" #~ msgstr "'names’必需是字符串" #~ msgid "bad hsv to rgb color conversion" #~ msgstr "hsv到rgb颜色转换不对" #~ msgid "unknown palette (need >= 2 colors)" #~ msgstr "没有这种调色(至少需要两种颜色)" #~ msgid "maximum number of colors exceeded" #~ msgstr "颜色的数目已超过最大值" #~ msgid "invalid RGB specification" #~ msgstr "RGB设定不对" #~ msgid "invalid color name '%s'" #~ msgstr "颜色名字'%s'不对" #~ msgid "invalid color specification '%s'" #~ msgstr "颜色设定'%s'不对" #~ msgid "supplied color is not numeric nor character" #~ msgstr "所提供的颜色值不是数值，也不是字符串" #, fuzzy #~ msgid "invalid color specification" #~ msgstr "颜色设定不对" #~ msgid "rcont2 [%d,%d]: exp underflow to 0; algorithm failure" #~ msgstr "rcont2 [%d,%d]: exp下溢到0; 算法失败" #~ msgid "no R-to-C converter found corresponding to identifier" #~ msgstr "找不到与标识符相应的R-to-C转换器" #~ msgid "invalid USE.NAMES value" #~ msgstr "USE.NAMES值不对" #~ msgid "duplicated levels will not be allowed in factors anymore" #~ msgstr "因子里不能有重复" #~ msgid "... used in an incorrect context" #~ msgstr "... 的上下文用得不对" #~ msgid "NAOK used more than once" #~ msgstr "NAOK只能用一次" #~ msgid "PACKAGE used more than once" #~ msgstr "PACKAGE只能用一次" #~ msgid "Invalid graphics state" #~ msgstr "图形狀態出错" #~ msgid "invalid mode to pass to Fortran (arg %d)" #~ msgstr "传给Fortran的状态出错(arg%d)" #~ msgid "invalid function in call_R" #~ msgstr "call_R中的函数不对" #~ msgid "invalid argument count in call_R" #~ msgstr "call_R的参数数目不对" #~ msgid "invalid return value count in call_R" #~ msgstr "call_R的回覆值数目不对" #~ msgid "can't use R profiling while byte code profiling" #~ msgstr "在进行一位元組碼程序概要分析的同时不能用R来进行程序概要分析" #~ msgid "bad switch names" #~ msgstr "开关名字不对" #~ msgid "constBuf must be a generic vector" #~ msgstr "constBuf必需是矢量类属" #~ msgid "bad constCount value" #~ msgstr "constCount值不对" #~ msgid "lapack routines cannot be accessed in module" #~ msgstr "无法读写模块里的lapack 例行程序" #~ msgid "lapack routines cannot be loaded" #~ msgstr "无法载入lapack 例行程序s" #~ msgid "'UseMethod' called from outside a closure" #~ msgstr "不能在封闭外调用'UseMethod'" #~ msgid "invalid `which' in TeX" #~ msgstr "TeX里'which'设定不对" #~ msgid "internal error in do_random1" #~ msgstr "do_random1产生了内部错误" #~ msgid "internal error in do_random2" #~ msgstr "do_random2产生了内部错误" #~ msgid "internal error in do_random3" #~ msgstr "do_random3产生了内部错误" #~ msgid "%s%d:%d: %s" #~ msgstr "%s%d:%d: %s" #~ msgid "" #~ "%s%d:%d: %s\n" #~ "%d: %s\n" #~ "%*s" #~ msgstr "" #~ "%s%d:%d: %s\n" #~ "%d: %s\n" #~ "%*s" #~ msgid "" #~ "%s%d:%d: %s\n" #~ "%d: %s\n" #~ "%d: %s\n" #~ "%*s" #~ msgstr "" #~ "%s%d:%d: %s\n" #~ "%d: %s\n" #~ "%d: %s\n" #~ "%*s" #~ msgid "%s" #~ msgstr "%s " #~ msgid "cannot mkdir R_TempDir" #~ msgstr "无法执行mkdir R_TempDir" #~ msgid "csduplicated not called on a STRSXP" #~ msgstr "csduplicated不能调用在STRSXP上" #~ msgid "color intensity %g, not in [0,1]" #~ msgstr "颜色强度%g不在[0,1]之间" #~ msgid "color intensity %d, not in 0:255" #~ msgstr "颜色强度%d不在0:255之间" #~ msgid "alpha level %g, not in [0,1]" #~ msgstr "alpha层次%g不在[0,1] 之间" #~ msgid "alpha level %d, not in 0:255" #~ msgstr "alpha层次%d不在0:255之间" #~ msgid "invalid hsv color" #~ msgstr "hsv颜色不对" #~ msgid "invalid hcl color" #~ msgstr "hcl颜色不对" #~ msgid "invalid 'names' vector" #~ msgstr "'names'矢量不对" #~ msgid "invalid gray level, must be in [0,1]." #~ msgstr "灰度必需在[0,1] 之间." #~ msgid "rgb is not a matrix (internally)" #~ msgstr "rgb不是矩阵(内部)" #~ msgid "rgb must have 3 rows (internally)" #~ msgstr "rgb必需有三行(内部)" #~ msgid "invalid bind address specification" #~ msgstr "连结文件名字设定不对" #~ msgid "'outFile' must be a single file" #~ msgstr "'outfile'必需是单文件" #~ msgid "unknown type" #~ msgstr "没有这种类别" #~ msgid "Menu functions can only be used in the GUI" #~ msgstr "菜单功能只能在GUI中用" #~ msgid "unable to retrieve items for %s (%s)" #~ msgstr "无法检索项目%s (%s)" #~ msgid "unable to add menu (%s)" #~ msgstr "无法加菜单(%s)" #~ msgid "unable to add menu item (%s)" #~ msgstr "无法加入菜单(%s)项" #~ msgid "menu does not exist" #~ msgstr "菜单不存在" #~ msgid "unable to delete menu item (%s)" #~ msgstr "无法删除菜单项(%s)" #~ msgid "'savehistory' can only be used in Rgui and Rterm" #~ msgstr "'savehistory'只能在Rgui和Rterm里有用" #~ msgid "'loadhistory' can only be used in Rgui and Rterm" #~ msgstr "'loadhistory'只能在Rgui和Rterm有用" #~ msgid "Select one or more" #~ msgstr "选择一个或几个: " #~ msgid "Select one" #~ msgstr "选择一个: " #~ msgid "argument must be a character vector or a raw vector" #~ msgstr "参数必需是长度为一的字符矢量或原始矢量" #~ msgid "'default' must be a character string" #~ msgstr "'default'必需为字符串" #~ msgid "'default' is overlong" #~ msgstr "'default'太长了" #~ msgid "'caption' must be a character string" #~ msgstr "'caption'必需为字符串" #~ msgid "'multi' must be a logical value" #~ msgstr "'multi'必需为逻辑值" #~ msgid "'filterindex' must be an integer value" #~ msgstr "'filterindex'必需为正数" #~ msgid "'title' must be a character string" #~ msgstr "'title'必需为字符串" #~ msgid "'%s' element %d is not a window handle" #~ msgstr "'%s'的%d元素不是窗户环柄" #~ msgid "Registry key '%ls' not found" #~ msgstr "找不到寄存器键'%ls'" #~ msgid "string terminated by newline or EOF" #~ msgstr "字符串结尾要用新行或EOF" #~ msgid "the first argument must be of mode character" #~ msgstr "第一参数的状态必需是字符" #~ msgid "Selection: " #~ msgstr "选择: " #~ msgid "cannot allocate buffer in 'readTableHead'" #~ msgstr "'readTableHead'无法分配缓冲区" #~ msgid "\\ followed by EOF" #~ msgstr "\\ 后面跟着EOF" #~ msgid "incomplete final line found by readTableHeader on '%s'" #~ msgstr "readTableHeader在读取'%s'时遇到了不完全的最后一行" #~ msgid "'file' is not a connection" #~ msgstr "'file'不是链结" #~ msgid "corrupt data frame -- length of column %d does not not match nrows" #~ msgstr "数据框损坏了--列的长度%d不等于行的数目" #~ msgid "corrupt matrix -- dims not not match length" #~ msgstr "矩阵损坏了--dims同长度不相等" #~ msgid "NA's in .C(\"bincode\",... NAOK=FALSE)" #~ msgstr ".C(\"bincode\",... NAOK=FALSE)有NA值" #~ msgid "NA's in .C(\"bincount\",... NAOK=FALSE)" #~ msgstr ".C(\"bincount\",... NAOK=FALSE)有NA值" #~ msgid "non-numeric matrix in rowsum(): this cannot happen" #~ msgstr "rowsum()里出现了非数值矩阵：这不应该发生" #~ msgid "'method' must be a character string" #~ msgstr "'method'必需是字符串" #~ msgid "no dyn.load support in this R version" #~ msgstr "本R版本不支持dyn.load" #~ msgid "vector size cannot be negative" #~ msgstr "矢量size不能是负的" #, fuzzy #~ msgid "long vectors are not supported for index.return" #~ msgstr "这个平台不支持符号链结" #~ msgid "'R_get_primname' called on a non-primitive" #~ msgstr "'R_get_primname'不能调用于非原始函数"