# Chinese translations for R package # Copyright (C) 2005 The R Foundation # This file is distributed under the same license as the PACKAGE package. # 陈斐 , 2006. # msgid "" msgstr "" "Project-Id-Version: R 2.1.0\n" "Report-Msgid-Bugs-To: bugs@R-project.org\n" "POT-Creation-Date: 2009-04-03 12:49+0100\n" "PO-Revision-Date: 2005-05-20 18:26+0800\n" "Last-Translator: ronggui\n" "Language-Team: Chinese\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: src/appl/binning.c:73 msgid "NA's in .C(\"bincode\",... NAOK=FALSE)" msgstr ".C(\"bincode\",... NAOK=FALSE)有NA值" #: src/appl/binning.c:111 msgid "NA's in .C(\"bincount\",... NAOK=FALSE)" msgstr ".C(\"bincount\",... NAOK=FALSE)有NA值" #: src/appl/pretty.c:106 msgid "Internal(pretty()): very small range.. corrected" msgstr "Internal(pretty()): 范围太小，纠正了" #: src/appl/pretty.c:109 msgid "Internal(pretty()): very large range.. corrected" msgstr "Internal(pretty()): 范围太大，纠正了" #: src/appl/rcont.c:78 #, c-format msgid "rcont2 [%d,%d]: exp underflow to 0; algorithm failure" msgstr "rcont2 [%d,%d]: exp下溢到0; 算法失败" #: src/appl/strsignif.c:114 msgid ".C(..): Width cannot be zero" msgstr ".C(..): 宽度不能为0" #: src/appl/strsignif.c:128 msgid ".C(..): 'type' must be \"integer\" for \"d\"-format" msgstr ".C(..):’type’如果用作\"d\"格式的话必需为\"integer\"" #: src/appl/strsignif.c:208 msgid ".C(..): 'type' must be \"real\" for this format" msgstr ".C(..):’type’必需为\"real\"才能用这种格式" #: src/gnuwin32/dynload.c:155 #, c-format msgid "DLL attempted to change FPU control word from %x to %x" msgstr "DLL试图把FPU控制词从%x改成%x" #: src/gnuwin32/dynload.c:193 msgid "cannot get working directory" msgstr "找不到工作目录" #: src/gnuwin32/extra.c:65 src/gnuwin32/extra.c:584 msgid "unsupported version of Windows" msgstr "不支持这版本的Windows" #: src/gnuwin32/extra.c:127 src/gnuwin32/extra.c:149 src/gnuwin32/extra.c:183 msgid "R_HOME not set" msgstr "没有设定R_HOME" #: src/gnuwin32/extra.c:132 src/gnuwin32/extra.c:154 #, c-format msgid "'%s' not found" msgstr "找不到'%s'" #: src/gnuwin32/extra.c:134 src/gnuwin32/extra.c:156 #, c-format msgid "file association for '%s' not available or invalid" msgstr "无法同'%s'进行文件关联" #: src/gnuwin32/extra.c:137 src/gnuwin32/extra.c:159 #, c-format msgid "access to '%s' denied" msgstr "不能存取'%s'" #: src/gnuwin32/extra.c:138 src/gnuwin32/extra.c:160 #, c-format msgid "problem in displaying '%s'" msgstr "在显示'%s'时出了问题" #: src/gnuwin32/extra.c:171 src/gnuwin32/extra.c:202 src/gnuwin32/extra.c:227 #: src/gnuwin32/extra.c:230 src/gnuwin32/extra.c:276 src/gnuwin32/extra.c:313 #: src/gnuwin32/extra.c:324 src/gnuwin32/extra.c:348 src/gnuwin32/extra.c:356 #: src/gnuwin32/extra.c:503 src/gnuwin32/extra.c:523 src/gnuwin32/extra.c:564 #: src/gnuwin32/extra.c:740 src/gnuwin32/extra.c:824 src/gnuwin32/extra.c:827 #: src/gnuwin32/extra.c:832 src/gnuwin32/extra.c:1434 #: src/gnuwin32/extra.c:1459 src/main/apply.c:131 src/main/apply.c:133 #: src/main/apply.c:136 src/main/array.c:73 src/main/array.c:1035 #: src/main/array.c:1168 src/main/array.c:1170 src/main/array.c:1171 #: src/main/attrib.c:193 src/main/builtin.c:138 src/main/builtin.c:491 #: src/main/builtin.c:507 src/main/builtin.c:685 src/main/character.c:105 #: src/main/character.c:108 src/main/character.c:167 src/main/character.c:3098 #: src/main/character.c:3102 src/main/character.c:3165 #: src/main/character.c:3169 src/main/character.c:3231 #: src/main/connections.c:912 src/main/connections.c:918 #: src/main/connections.c:921 src/main/connections.c:925 #: src/main/connections.c:1067 src/main/connections.c:1083 #: src/main/connections.c:1088 src/main/connections.c:1279 #: src/main/connections.c:1285 src/main/connections.c:1289 #: src/main/connections.c:1292 src/main/connections.c:1470 #: src/main/connections.c:1476 src/main/connections.c:1480 #: src/main/connections.c:2062 src/main/connections.c:2067 #: src/main/connections.c:2070 src/main/connections.c:2073 #: src/main/connections.c:2434 src/main/connections.c:2439 #: src/main/connections.c:2445 src/main/connections.c:2449 #: src/main/connections.c:2464 src/main/connections.c:2515 #: src/main/connections.c:2520 src/main/connections.c:2524 #: src/main/connections.c:2528 src/main/connections.c:2532 #: src/main/connections.c:2538 src/main/connections.c:2584 #: src/main/connections.c:2590 src/main/connections.c:2594 #: src/main/connections.c:2645 src/main/connections.c:2648 #: src/main/connections.c:2908 src/main/connections.c:2911 #: src/main/connections.c:2914 src/main/connections.c:3009 #: src/main/connections.c:3015 src/main/connections.c:3164 #: src/main/connections.c:3167 src/main/connections.c:3171 #: src/main/connections.c:3174 src/main/connections.c:3281 #: src/main/connections.c:3384 src/main/connections.c:3698 #: src/main/connections.c:3721 src/main/connections.c:3754 #: src/main/connections.c:3772 src/main/connections.c:3792 #: src/main/connections.c:3932 src/main/connections.c:3936 #: src/main/connections.c:4062 src/main/connections.c:4064 #: src/main/connections.c:4066 src/main/connections.c:4098 #: src/main/connections.c:4226 src/main/connections.c:4252 #: src/main/connections.c:4256 src/main/connections.c:4260 #: src/main/context.c:497 src/main/context.c:506 src/main/context.c:510 #: src/main/datetime.c:653 src/main/datetime.c:728 src/main/datetime.c:730 #: src/main/datetime.c:734 src/main/datetime.c:867 src/main/datetime.c:869 #: src/main/datetime.c:1015 src/main/debug.c:213 src/main/deparse.c:344 #: src/main/devices.c:581 src/main/dounzip.c:250 src/main/dounzip.c:257 #: src/main/dounzip.c:267 src/main/dounzip.c:272 src/main/dounzip.c:276 #: src/main/envir.c:1529 src/main/envir.c:1532 src/main/envir.c:1621 #: src/main/envir.c:1626 src/main/envir.c:1692 src/main/envir.c:1708 #: src/main/envir.c:1714 src/main/envir.c:1808 src/main/envir.c:1816 #: src/main/envir.c:1823 src/main/envir.c:1837 src/main/envir.c:1843 #: src/main/envir.c:1847 src/main/envir.c:2063 src/main/envir.c:2184 #: src/main/envir.c:2442 src/main/envir.c:2716 src/main/envir.c:3257 #: src/main/eval.c:282 src/main/eval.c:1696 src/main/eval.c:1720 #: src/main/eval.c:1724 src/main/memory.c:2940 src/main/model.c:1612 #: src/main/model.c:1620 src/main/optim.c:225 src/main/paste.c:85 #: src/main/paste.c:344 src/main/paste.c:351 src/main/paste.c:358 #: src/main/paste.c:363 src/main/paste.c:368 src/main/paste.c:373 #: src/main/paste.c:376 src/main/paste.c:384 src/main/paste.c:532 #: src/main/paste.c:537 src/main/platform.c:290 src/main/platform.c:292 #: src/main/platform.c:294 src/main/platform.c:994 src/main/platform.c:1000 #: src/main/platform.c:1055 src/main/platform.c:1103 src/main/platform.c:1106 #: src/main/platform.c:1109 src/main/platform.c:1112 src/main/platform.c:1115 #: src/main/platform.c:1199 src/main/platform.c:1202 src/main/platform.c:1363 #: src/main/platform.c:1366 src/main/platform.c:1402 src/main/platform.c:1405 #: src/main/platform.c:1478 src/main/platform.c:1496 src/main/platform.c:1535 #: src/main/platform.c:1537 src/main/platform.c:1595 src/main/platform.c:1686 #: src/main/platform.c:1947 src/main/platform.c:1987 src/main/platform.c:2108 #: src/main/platform.c:2111 src/main/platform.c:2114 src/main/platform.c:2117 #: src/main/platform.c:2234 src/main/platform.c:2262 src/main/plot.c:2953 #: src/main/plot.c:4092 src/main/plot.c:4096 src/main/plot.c:4099 #: src/main/plot3d.c:2447 src/main/plot3d.c:2451 src/main/plot3d.c:2456 #: src/main/plot3d.c:2460 src/main/plot3d.c:2464 src/main/plot3d.c:2468 #: src/main/print.c:175 src/main/print.c:181 src/main/print.c:203 #: src/main/print.c:209 src/main/print.c:215 src/main/random.c:469 #: src/main/random.c:473 src/main/random.c:477 src/main/saveload.c:1936 #: src/main/saveload.c:1939 src/main/saveload.c:1942 src/main/saveload.c:2059 #: src/main/saveload.c:2227 src/main/saveload.c:2232 src/main/saveload.c:2235 #: src/main/saveload.c:2329 src/main/saveload.c:2379 src/main/scan.c:672 #: src/main/scan.c:839 src/main/scan.c:852 src/main/scan.c:856 #: src/main/scan.c:858 src/main/scan.c:869 src/main/scan.c:896 #: src/main/scan.c:899 src/main/scan.c:952 src/main/scan.c:991 #: src/main/scan.c:995 src/main/scan.c:1005 src/main/scan.c:1221 #: src/main/scan.c:1497 src/main/scan.c:1509 src/main/scan.c:1513 #: src/main/scan.c:1519 src/main/scan.c:1733 src/main/scan.c:1734 #: src/main/scan.c:1736 src/main/scan.c:1737 src/main/scan.c:1738 #: src/main/scan.c:1739 src/main/scan.c:1740 src/main/scan.c:1741 #: src/main/seq.c:360 src/main/seq.c:364 src/main/seq.c:382 src/main/seq.c:386 #: src/main/seq.c:392 src/main/seq.c:400 src/main/sort.c:160 #: src/main/sysutils.c:560 src/main/sysutils.c:562 src/main/sysutils.c:564 #: src/main/unique.c:703 src/main/unique.c:950 src/main/unique.c:1010 #: src/main/unique.c:1017 src/main/util.c:558 src/main/util.c:561 #: src/modules/internet/internet.c:283 src/modules/internet/internet.c:289 #: src/modules/internet/internet.c:295 src/modules/internet/internet.c:298 #: src/modules/internet/internet.c:302 src/modules/lapack/Lapack.c:151 #: src/modules/lapack/Lapack.c:241 src/modules/lapack/Lapack.c:633 #: src/modules/lapack/Lapack.c:729 src/modules/lapack/Lapack.c:786 #: src/modules/lapack/Lapack.c:1044 src/modules/X11/devX11.c:2687 #: src/modules/X11/devX11.c:2690 src/modules/X11/devX11.c:2693 #: src/modules/X11/devX11.c:2726 src/modules/X11/devX11.c:3129 #: src/modules/X11/devX11.c:3134 src/modules/X11/devX11.c:3138 #: src/modules/X11/devX11.c:3142 src/modules/X11/devX11.c:3146 #: src/modules/X11/devX11.c:3157 src/modules/X11/devX11.c:3161 #: src/unix/sys-std.c:1195 src/unix/sys-std.c:1218 #, c-format msgid "invalid '%s' argument" msgstr "'%s'变元不对" #: src/gnuwin32/extra.c:214 msgid "unknown type" msgstr "没有这种类别" #: src/gnuwin32/extra.c:248 src/gnuwin32/extra.c:272 src/gnuwin32/extra.c:310 #: src/gnuwin32/extra.c:345 msgid "Menu functions can only be used in the GUI" msgstr "菜单功能只能在GUI中用" #: src/gnuwin32/extra.c:280 #, c-format msgid "unable to retrieve items for %s (%s)" msgstr "无法检索项目%s (%s)" #: src/gnuwin32/extra.c:318 #, c-format msgid "unable to add menu (%s)" msgstr "无法加菜单(%s)" #: src/gnuwin32/extra.c:330 #, c-format msgid "unable to add menu item (%s)" msgstr "无法加入菜单(%s)项" #: src/gnuwin32/extra.c:353 msgid "menu does not exist" msgstr "菜单不存在" #: src/gnuwin32/extra.c:360 #, c-format msgid "unable to delete menu item (%s)" msgstr "无法删除菜单项(%s)" #: src/gnuwin32/extra.c:512 msgid "'savehistory' can only be used in Rgui and Rterm" msgstr "'savehistory'只能在Rgui和Rterm里有用" #: src/gnuwin32/extra.c:529 msgid "'loadhistory' can only be used in Rgui and Rterm" msgstr "'loadhistory'只能在Rgui和Rterm有用" #: src/gnuwin32/extra.c:543 src/unix/sys-std.c:1244 msgid "invalid timestamp" msgstr "时间标签不对" #: src/gnuwin32/extra.c:659 src/gnuwin32/extra.c:1649 #: src/gnuwin32/extra.c:1825 src/gnuwin32/extra.c:1828 #: src/gnuwin32/extra.c:1831 src/main/character.c:837 src/main/colors.c:365 #: src/main/connections.c:2918 src/main/context.c:543 src/main/context.c:562 #: src/main/datetime.c:589 src/main/datetime.c:655 src/main/datetime.c:871 #: src/main/dotcode.c:199 src/main/errors.c:880 src/main/errors.c:911 #: src/main/errors.c:1012 src/main/errors.c:1037 src/main/errors.c:1042 #: src/main/optimize.c:95 src/main/optimize.c:102 src/main/optimize.c:111 #: src/main/optimize.c:180 src/main/optimize.c:186 src/main/optimize.c:195 #: src/main/platform.c:2282 src/main/plot.c:276 src/main/plot.c:470 #: src/main/plot.c:475 src/main/plot.c:2131 src/main/plot.c:2138 #: src/main/plot.c:3166 src/main/plot.c:3168 src/main/plot.c:3170 #: src/main/plot.c:3328 src/main/plot3d.c:1397 src/main/plot3d.c:2525 #: src/main/plot3d.c:2529 src/main/plot3d.c:2531 src/main/seq.c:152 #: src/main/seq.c:248 src/main/seq.c:251 src/main/sort.c:859 #: src/main/sort.c:957 src/main/source.c:205 src/main/summary.c:977 #: src/main/sysutils.c:229 src/main/util.c:876 src/main/util.c:881 #: src/main/util.c:888 src/main/util.c:891 src/modules/X11/devX11.c:2593 #: src/modules/X11/devX11.c:2620 src/modules/X11/devX11.c:2625 #: src/modules/X11/devX11.c:2630 src/modules/X11/devX11.c:2640 #: src/modules/X11/devX11.c:2645 src/modules/X11/devX11.c:2649 #: src/modules/X11/devX11.c:3150 src/unix/sys-std.c:1291 #, c-format msgid "invalid '%s' value" msgstr "'%s'值不对" #: src/gnuwin32/extra.c:715 src/gnuwin32/extra.c:726 msgid "incorrect argument" msgstr "变元不对" #: src/gnuwin32/extra.c:718 msgid "don't be silly!: your machine has a 4Gb address limit" msgstr "不要愚蠢!: 你的机器有4Gb的地址上限" #: src/gnuwin32/extra.c:721 msgid "cannot decrease memory limit: ignored" msgstr "无法减少内存极限：忽视不用" #: src/gnuwin32/extra.c:854 msgid "Select one or more" msgstr "选择一个或几个: " #: src/gnuwin32/extra.c:854 msgid "Select one" msgstr "选择一个: " #: src/gnuwin32/extra.c:1039 msgid "argument must be a character vector or a raw vector" msgstr "变元必需是长度为一的字符矢量或原始矢量" #: src/gnuwin32/extra.c:1075 src/main/connections.c:1594 msgid "Unable to open the clipboard" msgstr "无法打开裁剪板" #: src/gnuwin32/extra.c:1080 src/main/connections.c:1598 msgid "Unable to write to the clipboard" msgstr "无法写入裁剪板" #: src/gnuwin32/extra.c:1101 src/gnuwin32/extra.c:1136 msgid "'path' must be a character vector" msgstr "'path'必需为字符矢量" #: src/gnuwin32/extra.c:1196 src/gnuwin32/extra.c:1269 msgid "'default' must be a character string" msgstr "'default'必需为字符串" #: src/gnuwin32/extra.c:1198 src/gnuwin32/extra.c:1271 msgid "'default' is overlong" msgstr "'default'太长了" #: src/gnuwin32/extra.c:1202 src/gnuwin32/extra.c:1275 msgid "'caption' must be a character string" msgstr "'caption'必需为字符串" #: src/gnuwin32/extra.c:1204 msgid "'multi' must be a logical value" msgstr "'multi'必需为逻辑值" #: src/gnuwin32/extra.c:1206 msgid "'filterindex' must be an integer value" msgstr "'filterindex'必需为正数" #: src/gnuwin32/extra.c:1357 msgid "'title' must be a character string" msgstr "'title'必需为字符串" #: src/gnuwin32/extra.c:1374 msgid "'text' must be a character string" msgstr "'text'必需为字符串" #: src/gnuwin32/extra.c:1404 msgid "'which' must be length 1" msgstr "'which'的长度必需为一" #: src/gnuwin32/extra.c:1436 src/gnuwin32/extra.c:1438 #: src/gnuwin32/extra.c:1461 src/gnuwin32/extra.c:1463 #: src/gnuwin32/extra.c:1509 msgid "invalid device" msgstr "设备不对" #: src/gnuwin32/extra.c:1439 msgid "requires SDI mode" msgstr "必需用SDI方式" #: src/gnuwin32/extra.c:1503 msgid "invalid graphical device number" msgstr "图形设备号不对" #: src/gnuwin32/extra.c:1513 msgid "bad device" msgstr "设备有错" #: src/gnuwin32/extra.c:1835 #, c-format msgid "Registry key '%s' not found" msgstr "找不到寄存器键'%s'" #: src/gnuwin32/extra.c:1899 src/gnuwin32/extra.c:1907 msgid "invalid input in Rmbstowcs" msgstr "Rmbstowcs里的输入不对" #: src/gnuwin32/extra.c:1929 src/main/platform.c:1174 msgid "file choice cancelled" msgstr "撤消文件选择" #: src/gnuwin32/run.c:50 msgid "Insufficient memory (expandcmd)" msgstr "内存不够(expandcmd)" #: src/gnuwin32/run.c:59 msgid "A \" is missing (expandcmd)" msgstr "没有\"(expandcmd)" #: src/gnuwin32/run.c:99 msgid " not found" msgstr "没找到" #: src/gnuwin32/run.c:152 msgid "Impossible to redirect input" msgstr "无法为输入重新定向" #: src/gnuwin32/run.c:241 msgid "Impossible to run " msgstr "无法运行" #: src/gnuwin32/run.c:294 #, c-format msgid "Exit code was %d" msgstr "退出代码是%d" #: src/gnuwin32/run.c:318 msgid "Insufficient memory (rpipeOpen)" msgstr "内存不够(rpipeOpen)" #: src/gnuwin32/run.c:326 src/gnuwin32/run.c:344 msgid "Impossible to create pipe" msgstr "无法建立管道" #: src/gnuwin32/run.c:364 msgid "Impossible to create thread/pipe" msgstr "无法建立线程/管道" #: src/gnuwin32/run.c:504 src/main/dounzip.c:401 msgid "seek not enabled for this connection" msgstr "读取在这个链结无效" #: src/gnuwin32/run.c:510 msgid "truncate not enabled for this connection" msgstr "不能缩短这个链结" #: src/gnuwin32/run.c:590 src/gnuwin32/run.c:594 src/gnuwin32/run.c:607 #: src/gnuwin32/run.c:635 src/main/connections.c:1020 #: src/main/connections.c:1024 src/main/connections.c:1030 #: src/main/connections.c:1044 msgid "allocation of pipe connection failed" msgstr "管道链结分配失败" #: src/gnuwin32/run.c:649 msgid "'names' is not a character string" msgstr "'names’必需是字符串" #: src/gnuwin32/sys-win32.c:179 msgid "character string expected as first argument" msgstr "第一个变元应当是字符串" #: src/gnuwin32/sys-win32.c:195 msgid "character string expected as third argument" msgstr "第三个变元应当是字符串" #: src/gnuwin32/system.c:121 src/main/errors.c:136 msgid "reached session elapsed time limit" msgstr "到达了对话流逝时间限制" #: src/gnuwin32/system.c:123 src/main/errors.c:138 msgid "reached elapsed time limit" msgstr "到达了流逝时间限制" #: src/gnuwin32/system.c:129 src/main/errors.c:144 msgid "reached session CPU time limit" msgstr "到达了对话CPU时间限制" #: src/gnuwin32/system.c:131 src/main/errors.c:146 msgid "reached CPU time limit" msgstr "到达了CPU时间限制" #: src/gnuwin32/system.c:151 #, c-format msgid "Fatal error: %s\n" msgstr "致命错误:%s\n" #: src/gnuwin32/system.c:329 src/unix/sys-std.c:849 #, c-format msgid "encoding '%s' is not recognised" msgstr "编码'%s'不存在" #: src/gnuwin32/system.c:335 src/unix/sys-std.c:855 #, c-format msgid "\n" msgstr "<错误: 无法将编码'%s'重新进行编码>\n" #: src/gnuwin32/system.c:542 src/gnuwin32/system.c:1021 #: src/gnuwin32/system.c:1033 src/main/connections.c:510 #: src/main/connections.c:515 src/main/dounzip.c:114 src/main/saveload.c:1947 #: src/main/serialize.c:2104 src/main/serialize.c:2109 #: src/main/serialize.c:2189 src/main/serialize.c:2208 src/unix/system.c:311 #: src/unix/system.c:322 #, c-format msgid "cannot open file '%s': %s" msgstr "无法打开文件'%s': %s" #: src/gnuwin32/system.c:556 #, c-format msgid "file.show(): file '%s' does not exist\n" msgstr "file.show():不存在'%s'这个文件\n" #: src/gnuwin32/system.c:984 msgid "WARNING: no max-mem-size given\n" msgstr "警告: 没有设定max-mem-size\n" #: src/gnuwin32/system.c:990 #, c-format msgid "WARNING: --max-mem-size value is invalid: ignored\n" msgstr "警告: --max-mem-size值不对: 略过不用\n" #: src/gnuwin32/system.c:992 #, c-format msgid "WARNING: --max-mem-size=%lu%c: too large and ignored\n" msgstr "警告: --max-mem-size=%lu%c: 太大，略过不用\n" #: src/gnuwin32/system.c:997 #, c-format msgid "WARNING: --max-mem-size=%4.1fM: too small and ignored\n" msgstr "警告: --max-mem-size=%4.1fM太小，略过不用\n" #: src/gnuwin32/system.c:1001 #, c-format msgid "WARNING: --max-mem-size=%4.0fM: too large and taken as %uM\n" msgstr "警告: --max-mem-size=%4.0fM太大，当作%uM来用\n" #: src/gnuwin32/system.c:1044 src/unix/system.c:341 #, c-format msgid "WARNING: '-e %s' omitted as input is too long\n" msgstr "警告: 因为太长了，'-e %s'这个输入略过不用\n" #: src/gnuwin32/system.c:1048 src/unix/system.c:355 #, c-format msgid "WARNING: unknown option '%s'\n" msgstr "警告: 没有'%s'这样的选项\n" #: src/gnuwin32/system.c:1070 src/unix/system.c:359 #, c-format msgid "ARGUMENT '%s' __ignored__\n" msgstr "变元’%s’略过不用\n" #: src/gnuwin32/system.c:1076 src/unix/system.c:366 msgid "cannot use -e with -f or --file" msgstr "-e选项不能同时和-f或--file一起出现" #: src/gnuwin32/system.c:1096 msgid "creation of tmpfile failed -- set TMPDIR suitably?" msgstr "建立tmpfile失败--设了TMPDIR没有？" #: src/gnuwin32/system.c:1115 src/unix/system.c:416 msgid "you must specify '--save', '--no-save' or '--vanilla'" msgstr "你必需选用'--save'，’--no-save'或'--vanilla'其中的一个" #: src/gnuwin32/system.c:1120 msgid "" "impossible to create 'reader thread'; you must free some system resources" msgstr "无法建立‘reader thread’，系统资源不够" #: src/include/Errormsg.h:31 msgid "NaNs produced" msgstr "产生了NaNs" #: src/include/Errormsg.h:33 msgid "Non-numeric argument to mathematical function" msgstr "数学函数中用了非数值变元" #: src/include/Errormsg.h:35 src/main/builtin.c:831 src/main/devices.c:366 #: src/main/scan.c:1446 src/main/util.c:1642 msgid "invalid argument" msgstr "变元不对" #: src/include/Errormsg.h:37 src/main/objects.c:398 msgid "first argument must be a character string" msgstr "第一个变元必需是字符串" #: src/include/Errormsg.h:38 msgid "first argument must be a list" msgstr "第一个变元必需是串列" #: src/include/Errormsg.h:39 msgid "second argument must be a character string" msgstr "第二个变元必需是字符串" #: src/include/Errormsg.h:40 msgid "second argument must be a list" msgstr "第二个变元必需是串列" #: src/include/Errormsg.h:42 src/main/eval.c:2829 src/main/subscript.c:286 #: src/main/subscript.c:395 src/main/subscript.c:495 msgid "subscript out of bounds" msgstr "下标出界" #: src/include/Errormsg.h:43 #, c-format msgid "object of type '%s' is not subsettable" msgstr "类别为'%s'的对象不可以取子集" #: src/include/Errormsg.h:44 msgid "invalid 'mode' argument" msgstr "'mode'变元不对" #: src/include/Errormsg.h:45 #, c-format msgid "invalid 'type' (%s) of argument" msgstr "'type'(%s)变元不对" #: src/include/Errormsg.h:46 msgid "applies only to lists and vectors" msgstr "只能用于串列和矢量" #: src/main/CConverters.c:305 msgid "no R-to-C converter found corresponding to identifier" msgstr "找不到与标识符相应的R-to-C转换器" #: src/main/CommandLineArgs.c:173 msgid "WARNING: no value given for --encoding given\n" msgstr "警告: 没有设定--enconding的值\n" #: src/main/CommandLineArgs.c:196 #, c-format msgid "WARNING: option '%s' no longer supported\n" msgstr "警告: 本版本不再支持'%s'这一选项\n" #: src/main/CommandLineArgs.c:207 #, c-format msgid "WARNING: no value given for '%s'\n" msgstr "警告: 没有设定'%s'的值\n" #: src/main/CommandLineArgs.c:215 #, c-format msgid "WARNING: '%s' value is invalid: ignored\n" msgstr "警告: '%s'的值不对: 略过不用\n" #: src/main/CommandLineArgs.c:219 #, c-format msgid "WARNING: %s: too large and ignored\n" msgstr "警告: %s: 太大，略过不用\n" #: src/main/CommandLineArgs.c:235 msgid "WARNING: no value given for '--max-ppsize'\n" msgstr "警告: 没有设定'--max-ppsize'的值\n" #: src/main/CommandLineArgs.c:240 msgid "WARNING: '-max-ppsize' value is negative: ignored\n" msgstr "警告: '-max-ppsize'的值是负数: 略过不用\n" #: src/main/CommandLineArgs.c:242 msgid "WARNING: '-max-ppsize' value is too small: ignored\n" msgstr "警告: '-max-ppsize'的值太小: 略过不用\n" #: src/main/CommandLineArgs.c:245 msgid "WARNING: '-max-ppsize' value is too large: ignored\n" msgstr "警告: '-max-ppsize'的值太大: 略过不用\n" #: src/main/RNG.c:140 #, c-format msgid "unif_rand: unimplemented RNG kind %d" msgstr "unif_rand: RNG种类%d目前没有实现" #: src/main/RNG.c:205 #, c-format msgid "FixupSeeds: unimplemented RNG kind %d" msgstr "FixupSeeds: RNG种类%d目前没有实现" #: src/main/RNG.c:240 msgid "'user_unif_rand' not in load table" msgstr "'user_unif_rand'在载入表中并不存在" #: src/main/RNG.c:248 msgid "cannot read seeds unless 'user_unif_nseed' is supplied" msgstr "只有在设定了'user_unif_nseed'以后才能读随机种" #: src/main/RNG.c:253 msgid "seed length must be in 0...625; ignored" msgstr "随机种的长度必需在0到625之间; 略过不用" #: src/main/RNG.c:261 #, c-format msgid "RNG_Init: unimplemented RNG kind %d" msgstr "RNG_Init: RNG种类%d目前没有实现" #: src/main/RNG.c:301 msgid ".Random.seed is a missing argument with no default" msgstr ".Random.seed这个变元没有设定，也没有缺省值" #: src/main/RNG.c:302 #, c-format msgid ".Random.seed is not an integer vector but of type '%s'" msgstr ".Random.seed不是整数矢量，类别为'%s'" #: src/main/RNG.c:308 msgid ".Random.seed[1] is not a valid integer" msgstr ".Random.seed[1]不是适当正数" #: src/main/RNG.c:312 msgid ".Random.seed[0] is not a valid Normal type" msgstr ".Random.seed[0]不是适当的Normal类" #: src/main/RNG.c:323 msgid ".Random.seed[1] = 5 but no user-supplied generator" msgstr ".Random.seed[1]=5但用户指定的发生器却不存在" #: src/main/RNG.c:326 msgid ".Random.seed[1] is not a valid RNG kind (code)" msgstr ".Random.seed[1]不是适当的RNG类(代码)" #: src/main/RNG.c:348 msgid ".Random.seed has wrong length" msgstr ".Random.seed的长度不对" #: src/main/RNG.c:401 #, c-format msgid "RNGkind: unimplemented RNG kind %d" msgstr "RNGkind: RNG种类%d目前没有实现" #: src/main/RNG.c:413 msgid "invalid Normal type in RNGkind" msgstr "RNGkind里的Normal类不对" #: src/main/RNG.c:416 msgid "'user_norm_rand' not in load table" msgstr "'user_norm_rand'不在载入表中" #: src/main/RNG.c:459 msgid "supplied seed is not a valid integer" msgstr "提供的随机种不是正确的正数" #: src/main/Rdynload.c:249 msgid "R_RegisterRoutines called with invalid DllInfo object." msgstr "在调用R_RegisterRoutines时DllInfo对象出了错." #: src/main/Rdynload.c:528 msgid "Maximal number of DLLs reached..." msgstr "已达到了DLL数目的上限..." #: src/main/Rdynload.c:581 msgid "could not allocate space for 'path'" msgstr "无法为'path'分配空间" #: src/main/Rdynload.c:594 #, c-format msgid "DLLname '%s' is too long" msgstr "DLLname '%s'太长" #: src/main/Rdynload.c:615 msgid "could not allocate space for 'name'" msgstr "无法为'name'分配空间" #: src/main/Rdynload.c:888 src/main/Rdynload.c:904 src/main/util.c:680 msgid "character argument expected" msgstr "需要字符变元" #: src/main/Rdynload.c:894 src/main/Rdynload.c:927 #, c-format msgid "" "unable to load shared library '%s':\n" " %s" msgstr "" "无法载入共享图书馆‘%s’：:\n" " %s" #: src/main/Rdynload.c:907 #, c-format msgid "dynamic/shared library '%s' was not loaded" msgstr "没有载入动态/共享图书馆'%s' " #: src/main/Rdynload.c:967 #, c-format msgid "cannot allocate memory for registered native symbol (%d bytes)" msgstr "无法给注册了的原始符号分配内存(%d字节)" #: src/main/Rdynload.c:1087 msgid "must pass package name or DllInfo reference" msgstr "必需传给程序包名字或DllInfo引用" #: src/main/Rdynload.c:1173 src/main/dotcode.c:130 #, c-format msgid "Unimplemented type %d in createRSymbolObject" msgstr "createRSymbolObject里的种类%d目前没有被实现" #: src/main/Rdynload.c:1255 msgid "R_getRegisteredRoutines() expects a DllInfo reference" msgstr " R_getRegisteredRoutines()需要DllInfo引用" #: src/main/Rdynload.c:1258 msgid "NULL value passed for DllInfo" msgstr "给DllInfo了一个NULL值" #: src/main/Rdynload.c:1294 src/main/Rdynload.c:1300 src/main/Rdynload.c:1307 #: src/main/Rdynload.c:1313 src/main/Rdynload.c:1319 msgid "no dyn.load support in this R version" msgstr "本R版本不支持dyn.load" #: src/main/Rdynload.c:1364 #, c-format msgid "function '%s' not provided by package '%s'" msgstr "程序包'%s'不提供'%s'这样的函数" #: src/main/Rdynload.c:1366 msgid "table entry must be an external pointer" msgstr "桌项必需是外部指针" #: src/main/Rstrptime.h:1102 msgid "input string is too long" msgstr "输入字符串太长" #: src/main/Rstrptime.h:1104 msgid "invalid multibyte input string" msgstr "多字节输入字符串不对" #: src/main/Rstrptime.h:1107 msgid "format string is too long" msgstr "格式字符串太长" #: src/main/Rstrptime.h:1109 msgid "invalid multibyte format string" msgstr "多字节格式字符串不对" #: src/main/apply.c:42 src/main/complex.c:928 msgid "invalid length" msgstr "长度不对" #: src/main/arithmetic.c:172 msgid "probable complete loss of accuracy in modulus" msgstr "系数精确度很可能完全损失" #: src/main/arithmetic.c:298 msgid "operator needs one or two arguments" msgstr "运算符需要一个或两个变元" #: src/main/arithmetic.c:315 msgid "non-numeric argument to binary operator" msgstr "二进列运算符中有非数值变元" #: src/main/arithmetic.c:374 src/main/relop.c:123 msgid "non-conformable arrays" msgstr "非整合陈列" #: src/main/arithmetic.c:417 msgid "non-conformable time-series" msgstr "非整合时间系列" #: src/main/arithmetic.c:439 src/main/logic.c:119 src/main/relop.c:68 #: src/main/relop.c:161 msgid "longer object length is not a multiple of shorter object length" msgstr "长的对象长度不是短的对象长度的整倍数" #: src/main/arithmetic.c:508 msgid "invalid argument to unary operator" msgstr "一进列运算符的变元不对" #: src/main/arithmetic.c:532 src/main/arithmetic.c:551 msgid "invalid unary operator" msgstr "一进列运算符不对" #: src/main/arithmetic.c:598 msgid "NAs produced by integer overflow" msgstr "整数上溢产生了NA" #: src/main/arithmetic.c:1026 msgid "unimplemented real function of 1 argument" msgstr "一变元的实数函数目前还没有实现" #: src/main/arithmetic.c:1038 src/main/complex.c:845 src/main/complex.c:917 msgid "unimplemented complex function" msgstr "目前没有实现复数功能" #: src/main/arithmetic.c:1287 src/main/arithmetic.c:1676 #: src/main/arithmetic.c:1858 src/main/arithmetic.c:1980 #, c-format msgid "unimplemented real function of %d numeric arguments" msgstr "%d数值变元的实数函数目前没有实现" #: src/main/arithmetic.c:1309 #, c-format msgid "%d arguments passed to 'atan' which requires 1" msgstr "给了'atan'%d个变元，但它最多只能用一个变元" #: src/main/arithmetic.c:1338 #, c-format msgid "%d arguments passed to '%s' which requires 1 or 2" msgstr "给了%d个变元到'%s'，但它最多只能用两个变元" #: src/main/arithmetic.c:1357 msgid "invalid second argument of length 0" msgstr "第二变元长度为零是不对的" #: src/main/arithmetic.c:1418 msgid "invalid argument 'base' of length 0" msgstr "不能有长度为零的'base'变元" #: src/main/arithmetic.c:1426 #, c-format msgid "%d arguments passed to 'log' which requires 1 or 2" msgstr "给了'log'%d个变元，但它最多只能用两个变元" #: src/main/array.c:70 msgid "non-numeric matrix extent" msgstr "非数值的矩阵范围" #: src/main/array.c:80 msgid "invalid 'nrow' value (too large or NA)" msgstr "'nrow'值不对(要么是太大，要么是含NA)" #: src/main/array.c:82 msgid "invalid 'nrow' value (< 0)" msgstr "'nrow'值不对(< 0)" #: src/main/array.c:85 msgid "invalid 'ncol' value (too large or NA)" msgstr "'ncol'值不对(要么是太大，要么是含NA)" #: src/main/array.c:87 msgid "invalid 'ncol' value (< 0)" msgstr "'ncol'值不对(< 0)" #: src/main/array.c:93 #, c-format msgid "" "data length [%d] is not a sub-multiple or multiple of the number of rows [%d]" msgstr "数据长度[%d]不是矩阵行数[%d]的整倍" #: src/main/array.c:96 #, c-format msgid "" "data length [%d] is not a sub-multiple or multiple of the number of columns " "[%d]" msgstr "数据长度[%d]不是矩阵列数[%d]的整倍数" #: src/main/array.c:99 msgid "data length exceeds size of matrix" msgstr "数据长度超过了矩阵的大小" #: src/main/array.c:104 msgid "too many elements specified" msgstr "设定了太多的元素" #: src/main/array.c:168 msgid "negative extents to matrix" msgstr "矩阵的范围不能是负值" #: src/main/array.c:170 msgid "allocMatrix: too many elements specified" msgstr "allocMatrix: 设定了太多的元素" #: src/main/array.c:197 msgid "negative extents to 3D array" msgstr "三维排列的范围不能是负值" #: src/main/array.c:199 msgid "alloc3Darray: too many elements specified" msgstr "alloc3Darray: 设定了太多的元素" #: src/main/array.c:222 msgid "allocArray: too many elements specified by 'dims'" msgstr "allocArray: 'dims'设定了太多的元素" #: src/main/array.c:394 msgid "a matrix-like object is required as argument to 'row/col'" msgstr "'row/col'必需用矩阵目标对象作变元" #: src/main/array.c:605 #, fuzzy msgid "requires numeric/complex matrix/vector arguments" msgstr "需要数值矩阵/矢量变元" #: src/main/array.c:679 src/main/array.c:683 src/main/array.c:687 msgid "non-conformable arguments" msgstr "非整合变元" #: src/main/array.c:971 msgid "argument is not a matrix" msgstr "变元不是矩阵" #: src/main/array.c:1008 msgid "invalid first argument, must be an array" msgstr "第一个变元不对, 必需是陈列" #: src/main/array.c:1024 msgid "'perm' is of wrong length" msgstr "'perm'的长度不对" #: src/main/array.c:1032 msgid "value out of range in 'perm'" msgstr "'perm'里的值在范围外" #: src/main/array.c:1180 msgid "'x' must be numeric" msgstr "'x'必需为数值" #: src/main/attrib.c:40 src/main/attrib.c:222 src/main/attrib.c:258 #: src/main/attrib.c:280 src/main/attrib.c:397 src/main/attrib.c:444 #: src/main/attrib.c:493 msgid "attempt to set an attribute on NULL" msgstr "NULL是不能有属性的" #: src/main/attrib.c:72 #, c-format msgid "row names must be 'character' or 'integer', not '%s'" msgstr "行名必需是'character'或'integer'，不能是'%s'" #: src/main/attrib.c:124 #, c-format msgid "getAttrib: invalid type (%s) for TAG" msgstr "getAttrib: 标记的种类(%s)不对" #: src/main/attrib.c:372 #, c-format msgid "invalid type (%s) for 'names': must be vector" msgstr "'names'的种类(%s)不对: 必需是矢量" #: src/main/attrib.c:375 #, c-format msgid "'names' attribute [%d] must be the same length as the vector [%d]" msgstr "'names'属性的长度[%d]必需和矢量的长度[%d]一样" #: src/main/attrib.c:380 msgid "names() applied to a non-vector" msgstr "names()不能用于非矢量" #: src/main/attrib.c:388 msgid "invalid time series parameters specified" msgstr "时间系列参数设定不对" #: src/main/attrib.c:401 msgid "'tsp' attribute must be numeric" msgstr "'tsp'属性必需为数值" #: src/main/attrib.c:407 msgid "'tsp' attribute must be numeric of length three" msgstr "'tsp'属性值的长度必需是三" #: src/main/attrib.c:424 msgid "cannot assign 'tsp' to zero-length vector" msgstr "零长度矢量不能设成'tsp'" #: src/main/attrib.c:455 msgid "attempt to set invalid 'comment' attribute" msgstr "无法设定'comment'属性" #: src/main/attrib.c:502 msgid "adding class \"factor\" to an invalid object" msgstr "无法为不适当的对象加\"factor\" 类别" #: src/main/attrib.c:510 msgid "attempt to set invalid 'class' attribute" msgstr "无法设非适当'class'属性" #: src/main/attrib.c:756 msgid "incompatible 'names' argument" msgstr "非兼容'names'变元" #: src/main/attrib.c:811 #, c-format msgid "invalid type (%s) to set 'names' attribute" msgstr "设'names'属性时种类(%s)出错" #: src/main/attrib.c:876 msgid "'dimnames' applied to non-array" msgstr "'dimnames'只能用于陈列" #: src/main/attrib.c:881 msgid "'dimnames' must be a list" msgstr "'dimnames'必需是串列" #: src/main/attrib.c:884 src/main/attrib.c:907 #, c-format msgid "length of 'dimnames' [%d] must match that of 'dims' [%d]" msgstr "'dimnames'的长度[%d]必需同'dims'的长度[%d]相等" #: src/main/attrib.c:913 #, c-format msgid "invalid type (%s) for 'dimnames' (must be a vector)" msgstr "设'dimnames'时的种类(%s)不对(必需为矢量)" #: src/main/attrib.c:916 #, c-format msgid "length of 'dimnames' [%d] not equal to array extent" msgstr "'dimnames'的长度[%d]必需与陈列范围相等" #: src/main/attrib.c:976 src/main/builtin.c:64 src/main/builtin.c:101 #: src/main/envir.c:1518 src/main/envir.c:1614 src/main/envir.c:1675 #: src/main/envir.c:1792 src/main/paste.c:67 src/main/paste.c:254 #: src/main/plot.c:1723 src/main/random.c:475 msgid "invalid first argument" msgstr "第一个变元不对" #: src/main/attrib.c:979 src/main/plot.c:1730 msgid "invalid second argument" msgstr "第二个变元不对" #: src/main/attrib.c:987 msgid "length-0 dimension vector is invalid" msgstr "不能有零长度的大小矢量" #: src/main/attrib.c:992 #, c-format msgid "dims [product %d] do not match the length of object [%d]" msgstr "dims [product %d]与对象长度[%d]不匹配" #: src/main/attrib.c:1075 msgid "attributes must be a list or NULL" msgstr "属性必需是串列或NULL值" #: src/main/attrib.c:1080 msgid "attributes must be named" msgstr "属性必需取名" #: src/main/attrib.c:1084 #, c-format msgid "all attributes must have names [%d does not]" msgstr "所有的属性都必需有名字[%d没有]" #: src/main/attrib.c:1180 msgid "'which' must be of mode character" msgstr "'which'属性的状态必需是字符" #: src/main/attrib.c:1182 msgid "exactly one attribute 'which' must be given" msgstr "只能给一个'which'属性" #: src/main/attrib.c:1228 src/main/attrib.c:1246 src/main/subscript.c:208 #: src/main/subscript.c:212 src/main/subset.c:1067 src/main/subset.c:1117 #, c-format msgid "partial match of '%s' to '%s'" msgstr "'%s'部分匹配到'%s'" #: src/main/attrib.c:1265 msgid "'name' must be non-null character string" msgstr "'name'必需为非空字符" #: src/main/attrib.c:1377 src/main/attrib.c:1439 src/main/attrib.c:1467 msgid "invalid type or length for slot name" msgstr "名字槽的类别或长度不对" #: src/main/attrib.c:1404 #, c-format msgid "cannot get a slot (\"%s\") from an object of type \"%s\"" msgstr "类别\"%2$s\"的对象中没有\"%1$s\"这样一个槽" #: src/main/attrib.c:1415 #, c-format msgid "no slot of name \"%s\" for this object of class \"%s\"" msgstr "\"%1$s\"槽名不存在于\"%2$s\"类别对象中" #: src/main/attrib.c:1462 msgid "formal classes cannot be used without the methods package" msgstr "一定要有方法程序包才能用正式类别" #: src/main/attrib.c:1474 #, c-format msgid "" "trying to get slot \"%s\" from an object of a basic class (\"%s\") with no " "slots" msgstr "无法从没有槽的基本类别(\"%2$s\") 的对象中取得\"%1$s\"槽" #: src/main/attrib.c:1478 #, c-format msgid "" "trying to get slot \"%s\" from an object (class \"%s\") that is not an S4 " "object " msgstr "非S4类别的对象(类别为\"%2$s\")没有\"%1$s\"这样的槽" #: src/main/base.c:270 msgid "Event GE_ScalePS requires a single numeric value" msgstr "GE_ScalePS事件需要单数值" #: src/main/bind.c:273 src/main/bind.c:313 src/main/bind.c:366 #: src/main/bind.c:444 src/main/bind.c:474 #, c-format msgid "type '%s' is unimplemented in '%s'" msgstr "'%2$s'里目前还没有实现'%1$s'这一种类" #: src/main/bind.c:673 msgid "repeated formal argument 'recursive'" msgstr "不能有重复的正式变元'recursive' " #: src/main/bind.c:684 msgid "repeated formal argument 'use.names'" msgstr "不能有重复的正式变元'use.names' " #: src/main/bind.c:881 msgid "argument not a list" msgstr "变元不是串列" #: src/main/bind.c:1024 src/main/eval.c:2007 src/main/eval.c:2016 #: src/main/objects.c:291 src/main/objects.c:345 src/main/objects.c:705 #: src/main/objects.c:722 src/main/objects.c:729 #, c-format msgid "class name too long in '%s'" msgstr "'%s'里的类别名字太长" #: src/main/bind.c:1099 msgid "cannot create a matrix from these types" msgstr "无法按这些种类建立矩阵" #: src/main/bind.c:1169 #, c-format msgid "number of rows of matrices must match (see arg %d)" msgstr "矩阵的行数必需相符(见arg%d)" #: src/main/bind.c:1403 #, c-format msgid "number of columns of matrices must match (see arg %d)" msgstr "矩阵的列数必需相符(见arg%d)" #: src/main/builtin.c:40 src/main/builtin.c:44 msgid "vector size cannot be NA" msgstr "矢量size不能是NA" #: src/main/builtin.c:48 msgid "vector size cannot be NA/NaN" msgstr "矢量大小不能是NA/NaN值" #: src/main/builtin.c:49 msgid "vector size cannot be infinite" msgstr "矢量大小不能是无限值" #: src/main/builtin.c:50 msgid "vector size cannot be negative" msgstr "矢量size不能是负的" #: src/main/builtin.c:51 msgid "vector size specified is too large" msgstr "矢量size设得太大了" #: src/main/builtin.c:73 src/main/builtin.c:82 src/main/builtin.c:277 #: src/main/builtin.c:305 src/main/builtin.c:342 src/main/builtin.c:351 #: src/main/coerce.c:1396 src/main/connections.c:2443 src/main/engine.c:2766 #: src/main/envir.c:922 src/main/envir.c:975 src/main/envir.c:1065 #: src/main/envir.c:1527 src/main/envir.c:1619 src/main/envir.c:1686 #: src/main/envir.c:1801 src/main/envir.c:2472 src/main/envir.c:2525 #: src/main/envir.c:2818 src/main/envir.c:2846 src/main/envir.c:2866 #: src/main/envir.c:2888 src/main/envir.c:2922 src/main/envir.c:2942 #: src/main/envir.c:3249 src/main/envir.c:3253 src/main/eval.c:3634 #: src/main/objects.c:190 src/main/objects.c:196 src/main/saveload.c:2055 #: src/main/saveload.c:2326 src/main/saveload.c:2376 src/main/serialize.c:2232 msgid "use of NULL environment is defunct" msgstr "NULL环境不再有用" #: src/main/builtin.c:142 src/main/debug.c:202 src/main/errors.c:1134 msgid "invalid number of arguments" msgstr "变元数目不对" #: src/main/builtin.c:289 msgid "replacement object is not an environment" msgstr "替换对象不是环境" #: src/main/builtin.c:309 msgid "'enclos' must be an environment" msgstr "'enclos'必需是环境" #: src/main/builtin.c:315 msgid "'size' must be a positive integer" msgstr "'size'变元必需是正整数" #: src/main/builtin.c:329 src/main/builtin.c:346 msgid "argument is not an environment" msgstr "变元不是环境" #: src/main/builtin.c:331 msgid "the empty environment has no parent" msgstr "空环境没有父母环境" #: src/main/builtin.c:348 msgid "can not set parent of the empty environment" msgstr "无法为空环境设父母环境" #: src/main/builtin.c:355 msgid "'parent' is not an environment" msgstr "'parent'不是环境" #: src/main/builtin.c:478 src/main/connections.c:3017 #: src/main/connections.c:3028 src/main/connections.c:3378 #: src/main/connections.c:3399 src/main/connections.c:3760 #: src/main/connections.c:3812 src/main/connections.c:4020 #: src/main/connections.c:4024 src/main/connections.c:4340 #: src/main/deparse.c:305 src/main/deparse.c:308 src/main/deparse.c:385 #: src/main/deparse.c:388 src/main/scan.c:1717 src/main/serialize.c:1653 msgid "cannot write to this connection" msgstr "无法写入此链结" #: src/main/builtin.c:483 src/main/builtin.c:513 src/main/platform.c:347 #: src/main/platform.c:350 src/main/plot3d.c:2539 src/main/plot3d.c:2543 #, c-format msgid "invalid '%s' specification" msgstr "'%s'设定不对" #: src/main/builtin.c:500 msgid "non-positive 'fill' argument will be ignored" msgstr "略过负的'fill'变元值" #: src/main/builtin.c:570 #, c-format msgid "argument %d (type '%s') cannot be handled by 'cat'" msgstr "cat目前还不能处理%d(种类为'%s')变元" #: src/main/builtin.c:688 msgid "vector: zero-length 'type' argument" msgstr "矢量: 'type'变元的长度为零" #: src/main/builtin.c:707 #, fuzzy, c-format msgid "vector: cannot make a vector of mode '%s'." msgstr "矢量: 无法建立状态为\"%s\"的矢量." #: src/main/builtin.c:732 msgid "cannot set length of non-vector" msgstr "不能设非矢量的长度" #: src/main/builtin.c:833 src/main/builtin.c:837 src/main/character.c:331 #: src/main/coerce.c:2498 msgid "invalid value" msgstr "值不对" #: src/main/builtin.c:836 msgid "missing value for 'length'" msgstr "'length'不能是遗漏值" #: src/main/builtin.c:863 src/main/coerce.c:2236 src/main/coerce.c:2277 msgid "... used in an incorrect context" msgstr "... 的上下文用得不对" #: src/main/builtin.c:868 msgid "invalid parameter in 'switch()'" msgstr "'switch()'的参数不对" #: src/main/builtin.c:879 msgid "switch: EXPR must return a length 1 vector" msgstr "switch: EXPR必需回覆长度为一的矢量" #: src/main/character.c:77 src/main/character.c:101 #, c-format msgid "'%s' requires a character vector" msgstr "'%s'需要字符矢量" #: src/main/character.c:134 src/main/character.c:160 src/main/character.c:898 #: src/main/character.c:2108 #, c-format msgid "invalid multibyte string %d" msgstr "多字节字符串%d有错" #: src/main/character.c:228 msgid "extracting substrings from a non-character object" msgstr "无法从非字符对象里抽取子字串" #: src/main/character.c:233 src/main/character.c:328 msgid "invalid substring argument(s)" msgstr "子字符串变元不对" #: src/main/character.c:323 msgid "replacing substrings in a non-character object" msgstr "无法在非字符的对象里替换子字串" #: src/main/character.c:409 src/main/character.c:411 src/main/character.c:1043 #: src/main/character.c:1045 src/main/character.c:1047 #: src/main/character.c:1049 src/main/character.c:1315 #: src/main/character.c:1317 src/main/character.c:1319 #: src/main/character.c:1321 src/main/character.c:1537 #: src/main/character.c:1539 src/main/character.c:1541 #: src/main/character.c:1543 src/main/character.c:1963 #: src/main/character.c:1965 src/main/character.c:1967 #: src/main/character.c:1969 #, c-format msgid "argument '%s' will be ignored" msgstr "略过'%s'变元值" #: src/main/character.c:413 src/main/character.c:2056 msgid "non-character argument" msgstr "非字符变元" #: src/main/character.c:421 src/main/character.c:1093 #: src/main/character.c:1570 src/main/pcre.c:217 src/main/pcre.c:418 msgid "perl = TRUE is only fully implemented in UTF-8 locales" msgstr "perl = TRUE只适用于UTF-8语言环境" #: src/main/character.c:486 src/main/character.c:1111 #: src/main/character.c:1592 src/main/pcre.c:235 src/main/pcre.c:434 #, c-format msgid "" "PCRE pattern compilation error\n" "\t'%s'\n" "\tat '%s'\n" msgstr "" "PCRE模式编缉错误\n" "\t'%s'\n" "\t在'%s'\n" #: src/main/character.c:488 src/main/character.c:516 #, c-format msgid "invalid split pattern '%s'" msgstr "split的式样'%s'不对" #: src/main/character.c:492 src/main/character.c:1117 #: src/main/character.c:1599 src/main/pcre.c:243 src/main/pcre.c:442 #, c-format msgid "" "PCRE pattern study error\n" "\t'%s'\n" msgstr "" "PCRE模式研究错误\n" "\t'%s'\n" #: src/main/character.c:515 src/main/character.c:1123 #: src/main/character.c:1365 src/main/character.c:1605 #, c-format msgid "regcomp error: '%s'" msgstr "regcomp出错：'%s'" #: src/main/character.c:798 msgid "the first argument must be a character vector" msgstr "第一变元必需是字符矢量" #: src/main/character.c:814 msgid "abbreviate used with non-ASCII chars" msgstr "abbreviate不适用于非ASCII字元" #: src/main/character.c:833 msgid "non-character names" msgstr "不能有非字符名字" #: src/main/character.c:1087 src/main/character.c:1575 src/main/pcre.c:228 #: src/main/pcre.c:423 msgid "" "ignore.case = TRUE, perl = TRUE, useBytes = TRUE\n" " in UTF-8 locales only works caselessly for ASCII patterns" msgstr "" "在UTF-8语言环境下ignore.case = TRUE, perl = TRUE只能对ASCII字符串适用，不管是" "大写还是小写" #: src/main/character.c:1102 src/main/character.c:1584 #: src/main/character.c:2001 src/main/pcre.c:428 msgid "regular expression is invalid in this locale" msgstr "正规表现不适用于此语言环境" #: src/main/character.c:1113 src/main/character.c:1124 #: src/main/character.c:1366 src/main/character.c:1594 #: src/main/character.c:1606 src/main/character.c:2004 src/main/pcre.c:237 #: src/main/pcre.c:436 #, c-format msgid "invalid regular expression '%s'" msgstr "正规表现’%s'不对" #: src/main/character.c:1138 src/main/character.c:1622 #: src/main/character.c:2021 src/main/pcre.c:262 src/main/pcre.c:468 #, c-format msgid "input string %d is invalid in this locale" msgstr "输入的字符串%d不适用于此语言环境" #: src/main/character.c:1220 src/main/pcre.c:62 #, c-format msgid "invalid backreference %d in regular expression" msgstr "正规表现中回转参考%d有错" #: src/main/character.c:1355 src/main/pcre.c:219 msgid "'pattern' is invalid in this locale" msgstr "'pattern'在本语言环境下不适用" #: src/main/character.c:1357 src/main/pcre.c:221 msgid "'replacement' is invalid in this locale" msgstr "'replacement'在本语言环境下不适用" #: src/main/character.c:1371 msgid "zero-length pattern" msgstr "式样长度为零" #: src/main/character.c:2163 #, c-format msgid "decreasing range specification ('%lc-%lc')" msgstr "不能设定递减的范围('%lc-%lc')" #: src/main/character.c:2249 #, c-format msgid "decreasing range specification ('%c-%c')" msgstr "不能设定递减的范围('%c-%c')" #: src/main/character.c:2402 msgid "invalid (NA) arguments." msgstr "(NA)变元不对." #: src/main/character.c:2438 msgid "invalid UTF-8 string 'old'" msgstr "UTF-8字符串'old'有错" #: src/main/character.c:2444 msgid "invalid multibyte string 'old'" msgstr "多字节字符串'old'有错" #: src/main/character.c:2457 msgid "invalid UTF-8 string 'new'" msgstr "UTF-8字符串'new'有错" #: src/main/character.c:2463 msgid "invalid multibyte string 'new'" msgstr "多字节字符串'new'有错" #: src/main/character.c:2489 src/main/character.c:2577 msgid "'old' is longer than 'new'" msgstr "'old'比'new'要长" #: src/main/character.c:2520 #, c-format msgid "invalid input multibyte string %d" msgstr "输入的多字节字符串%d有错" #: src/main/character.c:2672 msgid "could not allocate memory for approximate matching" msgstr "做近似比较时无法分配足够内存" #: src/main/character.c:2698 src/main/character.c:2710 msgid "could not perform case insensitive matching" msgstr "无法进行不区分字体大小写的比较" #: src/main/character.c:2762 src/main/character.c:2995 msgid "argument must be a character vector of length 1" msgstr "变元必需是长度为一的字符矢量" #: src/main/character.c:2764 src/main/character.c:2997 msgid "" "argument should be a character vector of length 1\n" "all but the first element will be ignored" msgstr "变元应当是长度为一的字节矢量，除第一个元素外其他所有的元素都略过不用" #: src/main/character.c:2780 src/main/character.c:2811 #: src/main/character.c:2832 msgid "argument 'x' must be a raw vector" msgstr "变元'x'必需是原始矢量" #: src/main/character.c:2783 src/main/character.c:3049 msgid "argument 'multiple' must be TRUE or FALSE" msgstr "变元'multiple'的值要么是TRUE要么是FALSE" #: src/main/character.c:2813 msgid "argument 'shift' must be a small integer" msgstr "变元'shift'值必需是一个小整数" #: src/main/character.c:2851 src/main/character.c:3045 msgid "argument 'x' must be an integer vector" msgstr "变元'x'必需是整数矢量" #: src/main/character.c:2871 msgid "argument 'x' must be raw, integer or logical" msgstr "变元'x'必需是原始值, 整数值或逻辑值" #: src/main/character.c:2873 msgid "argument 'type' must be a character string" msgstr "变元'type'必需是字符串" #: src/main/character.c:2877 #, c-format msgid "argument 'x' must be a multiple of %d long" msgstr "变元'x'必需是%d值的整倍数" #: src/main/character.c:2890 src/main/character.c:2904 msgid "argument 'x' must not contain NAs" msgstr "变元'x'不能含NA值" #: src/main/character.c:3093 msgid "strtrim() requires a character vector" msgstr "strtrim()需要字符矢量" #: src/main/character.c:3172 msgid "'dirmark = TRUE' is not supported on this platform" msgstr "本平台不支持'dirmark = TRUE'" #: src/main/character.c:3184 src/main/character.c:3198 #: src/main/platform.c:1373 src/main/platform.c:1417 msgid "internal out-of-memory condition" msgstr "内部出现了内存不够情况" #: src/main/character.c:3194 src/main/platform.c:1413 #, c-format msgid "read error on '%s'" msgstr "读取'%s'时出了错" #: src/main/coerce.c:69 src/main/errors.c:1149 msgid "NAs introduced by coercion" msgstr "强制改变过程中产生了NA" #: src/main/coerce.c:71 src/main/errors.c:1150 msgid "inaccurate integer conversion in coercion" msgstr "强制改变整数不精确" #: src/main/coerce.c:73 src/main/errors.c:1151 msgid "imaginary parts discarded in coercion" msgstr "强制改变时丢弃了虚数部分" #: src/main/coerce.c:75 msgid "out-of-range values treated as 0 in coercion to raw" msgstr "在强制改变成原始值时，任何溢位值当作零来处理" #: src/main/coerce.c:379 #, fuzzy, c-format msgid "invalid data of mode '%s' (too short)" msgstr "状态为\"%s\"的数据有错(太短了)" #: src/main/coerce.c:907 #, c-format msgid "'pairlist' object cannot be coerced to type '%s'" msgstr "'pairlist'对象不能被强制改变成'%s'种类" #: src/main/coerce.c:1015 #, c-format msgid "(list) object cannot be coerced to type '%s'" msgstr "(串列)对象不能强制改变成'%s'种类" #: src/main/coerce.c:1047 src/main/coerce.c:1344 msgid "no method for coercing this S4 class to a vector" msgstr "" #: src/main/coerce.c:1106 msgid "environments cannot be coerced to other types" msgstr "环境不能被强制改变成其他种类" #: src/main/coerce.c:1249 #, fuzzy msgid "attempting to coerce non-factor" msgstr "不能把非矢量变大" #: src/main/coerce.c:1392 msgid "list argument expected" msgstr "需要串列变元" #: src/main/coerce.c:1400 src/main/eval.c:3631 src/main/eval.c:3638 msgid "invalid environment" msgstr "环境不对" #: src/main/coerce.c:1404 msgid "argument must have length at least 1" msgstr "变元的长度至少要为一" #: src/main/coerce.c:1429 msgid "invalid body for function" msgstr "函数定义本体不对" #: src/main/coerce.c:1448 msgid "invalid length 0 argument" msgstr "长度为零的变元是不对的" #: src/main/coerce.c:1463 msgid "invalid argument list" msgstr "变元串列不对" #: src/main/coerce.c:1751 msgid "type \"single\" unimplemented in R" msgstr "\"single\"种类目前在R里还没有实现" #: src/main/coerce.c:1753 msgid "unimplemented predicate" msgstr "没有实现的谓词" #: src/main/coerce.c:1892 src/main/coerce.c:1990 #, c-format msgid "%s() applied to non-(list or vector) of type '%s'" msgstr "%s()不适用于类别为'%s'的非串列或非矢量" #: src/main/coerce.c:2155 msgid "'what' must be a character string or a function" msgstr "'what'必需是字符串或函数" #: src/main/coerce.c:2161 msgid "'envir' must be an environment" msgstr "'envir'必需是环境" #: src/main/coerce.c:2316 msgid "invalid environment specified" msgstr "环境设定有错" #: src/main/coerce.c:2377 msgid "Setting class(x) to NULL; result will no longer be an S4 object" msgstr "" #: src/main/coerce.c:2380 #, c-format msgid "" "Setting class(x) to multiple strings (\"%s\", \"%s\", ...); result will no " "longer be an S4 object" msgstr "" #: src/main/coerce.c:2382 #, c-format msgid "" "Setting class(x) to \"%s\" sets attribut to NULL; result will no longer be " "an S4 object" msgstr "" #: src/main/coerce.c:2412 msgid "invalid replacement object to be a class string" msgstr "字符串类别的替换对象不对" #: src/main/coerce.c:2432 #, c-format msgid "" "\"%s\" can only be set as the class if the object has this type; found \"%s\"" msgstr "只有在对象有这一类别的情况下才能设\"%s\"；不应该有\"%s\"" #: src/main/coerce.c:2450 #, c-format msgid "" "invalid to set the class to matrix unless the dimension attribute is of " "length 2 (was %d)" msgstr "除非维度的长度为二(目前是%d)，否则不能设为矩阵类别" #: src/main/coerce.c:2458 msgid "" "cannot set class to \"array\" unless the dimension attribute has length > 0" msgstr "除非维度的长度大于零，否则不能设为\"array\"类别" #: src/main/coerce.c:2489 msgid "'value' must be non-null character string" msgstr "'value'必需为非空字符" #: src/main/coerce.c:2502 msgid "invalid to change the storage mode of a factor" msgstr "不能改变因子的存储方式" #: src/main/colors.c:70 #, c-format msgid "color intensity %g, not in [0,1]" msgstr "颜色强度%g不在[0,1]之间" #: src/main/colors.c:77 #, c-format msgid "color intensity %d, not in 0:255" msgstr "颜色强度%d不在0:255之间" #: src/main/colors.c:84 #, c-format msgid "alpha level %g, not in [0,1]" msgstr "alpha层次%g不在[0,1] 之间" #: src/main/colors.c:91 #, c-format msgid "alpha level %d, not in 0:255" msgstr "alpha层次%d不在0:255之间" #: src/main/colors.c:135 msgid "invalid hsv color" msgstr "hsv颜色不对" #: src/main/colors.c:247 msgid "invalid hcl color" msgstr "hcl颜色不对" #: src/main/colors.c:298 msgid "invalid 'names' vector" msgstr "'names'矢量不对" #: src/main/colors.c:343 msgid "invalid gray level, must be in [0,1]." msgstr "灰度必需在[0,1] 之间." #: src/main/colors.c:429 msgid "rgb is not a matrix (internally)" msgstr "rgb不是矩阵(内部)" #: src/main/colors.c:432 msgid "rgb must have 3 rows (internally)" msgstr "rgb必需有三行(内部)" #: src/main/colors.c:486 msgid "bad hsv to rgb color conversion" msgstr "hsv到rgb颜色转换不对" #: src/main/colors.c:1277 src/main/errors.c:1135 src/main/logic.c:164 msgid "invalid argument type" msgstr "变元种类不对" #: src/main/colors.c:1281 msgid "unknown palette (need >= 2 colors)" msgstr "没有这种调色(至少需要两种颜色)" #: src/main/colors.c:1285 msgid "maximum number of colors exceeded" msgstr "颜色的数目已超过最大值" #: src/main/colors.c:1316 src/main/engine.c:2907 msgid "invalid hex digit in 'color' or 'lty'" msgstr "十六进制'color'设定或lty设定不对" #: src/main/colors.c:1326 src/main/colors.c:1336 msgid "invalid RGB specification" msgstr "RGB设定不对" #: src/main/colors.c:1369 #, c-format msgid "invalid color name '%s'" msgstr "颜色名字'%s'不对" #: src/main/colors.c:1378 #, c-format msgid "invalid color specification '%s'" msgstr "颜色设定'%s'不对" #: src/main/colors.c:1498 msgid "supplied color is not numeric nor character" msgstr "所提供的颜色值不是数值，也不是字符串" #: src/main/colors.c:1530 msgid "Invalid color specification" msgstr "颜色设定不对" #: src/main/complex.c:79 msgid "invalid complex unary operator" msgstr "复数一进列运算符有错" #: src/main/complex.c:287 msgid "unimplemented complex operation" msgstr "复数运算目前还没有实现" #: src/main/complex.c:402 msgid "non-numeric argument to function" msgstr "函数不能有非数值变元" #: src/main/complex.c:989 msgid "invalid polynomial coefficient" msgstr "多项式系数不对" #: src/main/complex.c:994 msgid "root finding code failed" msgstr "寻根码运行失败" #: src/main/connections.c:91 msgid "all connections are in use" msgstr "所有链结都已在运行" #: src/main/connections.c:102 msgid "connection not found" msgstr "找不到链结" #: src/main/connections.c:114 msgid "invalid connection" msgstr "链结不对" #: src/main/connections.c:145 #, c-format msgid "closing unused connection %d (%s)\n" msgstr "关闭不再使用的链结%d(%s)\n" #: src/main/connections.c:186 src/main/connections.c:201 #: src/main/sysutils.c:584 src/main/sysutils.c:728 src/main/sysutils.c:743 #: src/main/sysutils.c:830 src/main/sysutils.c:887 src/main/sysutils.c:897 #: src/main/sysutils.c:1185 #, c-format msgid "unsupported conversion from '%s' to '%s'" msgstr "不支持'%s'到'%s'的这种转换" #: src/main/connections.c:214 src/main/connections.c:230 #: src/main/connections.c:393 src/main/connections.c:399 #: src/main/connections.c:405 src/main/connections.c:416 #: src/main/connections.c:423 #, c-format msgid "%s not enabled for this connection" msgstr "%s对这个链结无效" #: src/main/connections.c:271 src/main/connections.c:288 #: src/main/connections.c:298 src/main/connections.c:2288 #: src/main/connections.c:2302 msgid "printing of extremely long output is truncated" msgstr "缩短了极长输出的打印" #: src/main/connections.c:320 msgid "invalid char string in output conversion" msgstr "输出转换字符串有错" #: src/main/connections.c:376 #, c-format msgid "invalid input found on input connection '%s'" msgstr "输入链结'%s'内的输入不对" #: src/main/connections.c:618 msgid "connection is not open for reading" msgstr "链结没有打开，不能读" #: src/main/connections.c:623 msgid "connection is not open for writing" msgstr "链结没有打开，不能写" #: src/main/connections.c:663 src/main/connections.c:1649 msgid "can only truncate connections open for writing" msgstr "只能缩短已经打开了的可以写的链结" #: src/main/connections.c:668 msgid "file truncation failed" msgstr "未能缩短文件" #: src/main/connections.c:670 msgid "file truncation unavailable on this platform" msgstr "本平台上没有文件缩短功能" #: src/main/connections.c:715 src/main/connections.c:719 #: src/main/connections.c:725 src/main/connections.c:742 msgid "allocation of file connection failed" msgstr "文件链结分配失败" #: src/main/connections.c:788 #, c-format msgid "cannot create fifo '%s', reason '%s'" msgstr "由于'%2$s'的原因，无法建立先进先出'%1$s'" #: src/main/connections.c:794 #, c-format msgid "'%s' exists but is not a fifo" msgstr "'%s'存在但不是先进先出" #: src/main/connections.c:807 #, c-format msgid "fifo '%s' is not ready" msgstr "先进先出'%s'还没有准备好" #: src/main/connections.c:808 #, c-format msgid "cannot open fifo '%s'" msgstr "无法打开先进先出'%s'" #: src/main/connections.c:849 src/main/connections.c:860 #: src/main/connections.c:1213 src/main/connections.c:1223 #: src/main/connections.c:1405 src/main/connections.c:1417 #: src/main/connections.c:1666 src/main/connections.c:1682 #: src/main/connections.c:1970 src/main/connections.c:4526 #: src/main/connections.c:4590 msgid "too large a block specified" msgstr "区组太大" #: src/main/connections.c:869 src/main/connections.c:873 #: src/main/connections.c:879 src/main/connections.c:895 msgid "allocation of fifo connection failed" msgstr "先进先出链结分配失败" #: src/main/connections.c:914 src/main/connections.c:1069 #: src/main/connections.c:1281 src/main/connections.c:1472 #: src/main/connections.c:2586 src/main/connections.c:4228 msgid "only first element of 'description' argument used" msgstr "只用了'description'变元的第一个元素" #: src/main/connections.c:931 msgid "" "fifo(\"\") only supports open = \"w+\" and open = \"w+b\": using the former" msgstr "fifo(\"\")只支持open = \"w+\"和open = \"w+b\"这两种模式：现在使用前者" #: src/main/connections.c:944 src/main/connections.c:1105 #: src/main/connections.c:1304 src/main/connections.c:1491 #: src/main/connections.c:2551 src/main/connections.c:2605 #: src/main/connections.c:2655 src/main/connections.c:2926 #: src/main/connections.c:3024 src/main/connections.c:3184 #: src/main/connections.c:3395 src/main/connections.c:3707 #: src/main/connections.c:3808 src/main/connections.c:4016 #: src/main/connections.c:4315 src/main/dcf.c:51 src/main/deparse.c:302 #: src/main/deparse.c:382 src/main/saveload.c:2238 src/main/saveload.c:2318 #: src/main/scan.c:913 src/main/scan.c:1026 src/main/scan.c:1527 #: src/main/scan.c:1721 src/main/source.c:250 msgid "cannot open the connection" msgstr "无法打开链结" #: src/main/connections.c:961 msgid "fifo connections are not available on this system" msgstr "本系统没有先进先出链结这个功能" #: src/main/connections.c:994 #, c-format msgid "cannot open pipe() cmd '%s': %s" msgstr "无法打开pipe()命令'%s': %s" #: src/main/connections.c:1126 msgid "pipe connections are not available on this system" msgstr "本系统没有管道链结这个功能" #: src/main/connections.c:1144 #, c-format msgid "cannot open compressed file '%s', probable reason '%s'" msgstr "无法打开压缩文件'%s'，可能是因为'%s'" #: src/main/connections.c:1185 msgid "whence = \"end\" is not implemented for gzfile connections" msgstr "whence = \"end\"不适用于gz文件链结" #: src/main/connections.c:1191 msgid "seek on a gzfile connection returned an internal error" msgstr "读取gz文件链结时内部出错" #: src/main/connections.c:1232 src/main/connections.c:1236 #: src/main/connections.c:1242 src/main/connections.c:1264 msgid "allocation of gzfile connection failed" msgstr "分配gz文件链结失败" #: src/main/connections.c:1340 #, c-format msgid "cannot open bzip2-ed file '%s', probable reason '%s'" msgstr "无法打开bzip2压缩文件'%s'，原因可能是'%s'" #: src/main/connections.c:1349 src/main/connections.c:1358 #, c-format msgid "file '%s' appears not to be compressed by bzip2" msgstr "文件'%s'看起来不象是bzip2类" #: src/main/connections.c:1427 src/main/connections.c:1431 #: src/main/connections.c:1437 src/main/connections.c:1455 msgid "allocation of bzfile connection failed" msgstr "分配bz文件链结失败" #: src/main/connections.c:1550 src/modules/X11/devX11.c:3279 msgid "memory allocation to copy clipboard failed" msgstr "抄写裁剪板时内存分配失败" #: src/main/connections.c:1555 src/modules/X11/devX11.c:3267 msgid "clipboard cannot be opened or contains no text" msgstr "打不开裁剪板，或是裁剪板不含文字" #: src/main/connections.c:1566 msgid "memory allocation to open clipboard failed" msgstr "打开裁剪板时内存分配失败" #: src/main/connections.c:1638 msgid "attempt to seek outside the range of the clipboard" msgstr "无法读取裁剪板范围外的内容" #: src/main/connections.c:1680 msgid "clipboard connection is open for reading only" msgstr "打开了只读裁剪板链结" #: src/main/connections.c:1700 msgid "clipboard buffer is full and output lost" msgstr "裁剪板缓冲区已满，丢失了输出" #: src/main/connections.c:1721 msgid "'mode' for the clipboard must be 'r' or 'w'" msgstr "裁剪板'mode'必需是'r'或'w'" #: src/main/connections.c:1724 msgid "'mode' for the clipboard must be 'r' on Unix" msgstr "Unix操作系统上裁剪板'mode'必需是'r'" #: src/main/connections.c:1727 src/main/connections.c:1733 #: src/main/connections.c:1739 src/main/connections.c:1756 msgid "allocation of clipboard connection failed" msgstr "裁剪板链结分配失败" #: src/main/connections.c:1825 src/main/connections.c:1829 #: src/main/connections.c:1835 msgid "allocation of terminal connection failed" msgstr "终端链结分配失败" #: src/main/connections.c:1947 msgid "attempting to add too many elements to raw vector" msgstr "不能给原始矢量加大多元素" #: src/main/connections.c:1998 msgid "attempt to seek outside the range of the raw connection" msgstr "无法读取原始链结范围外的内容" #: src/main/connections.c:2009 src/main/connections.c:2013 #: src/main/connections.c:2019 src/main/connections.c:2045 msgid "allocation of raw connection failed" msgstr "原始链结分配失败" #: src/main/connections.c:2099 msgid "'con' is not a rawConnection" msgstr "'con'不是rawConnection" #: src/main/connections.c:2102 msgid "'con' is not an output rawConnection" msgstr "'con'不是输出链结rawConnection" #: src/main/connections.c:2122 msgid "cannot allocate memory for text connection" msgstr "无法给文字链结分配内存" #: src/main/connections.c:2167 msgid "seek is not relevant for text connection" msgstr "读取不适用于文字链结" #: src/main/connections.c:2175 src/main/connections.c:2179 #: src/main/connections.c:2185 src/main/connections.c:2198 #: src/main/connections.c:2389 src/main/connections.c:2393 #: src/main/connections.c:2399 src/main/connections.c:2412 #: src/main/connections.c:2418 msgid "allocation of text connection failed" msgstr "文字链结分配失败" #: src/main/connections.c:2366 msgid "text connection: appending to a non-existent char vector" msgstr "文字链结: 不能符加给不存在的字符矢量" #: src/main/connections.c:2467 msgid "unsupported mode" msgstr "不支持此状态" #: src/main/connections.c:2490 msgid "'con' is not a textConnection" msgstr "'con'不是链结" #: src/main/connections.c:2493 msgid "'con' is not an output textConnection" msgstr "'con'不是输出链结" #: src/main/connections.c:2566 msgid "sockets are not available on this system" msgstr "本系统没有插坐这个功能" #: src/main/connections.c:2635 src/main/connections.c:2684 #: src/main/connections.c:2695 src/main/connections.c:2742 #: src/main/connections.c:2763 src/main/connections.c:2786 #: src/main/connections.c:2798 src/main/connections.c:2904 #: src/main/connections.c:3011 src/main/connections.c:4629 msgid "'con' is not a connection" msgstr "'con'不是链结" #: src/main/connections.c:2638 msgid "cannot open standard connections" msgstr "无法打开标准链结" #: src/main/connections.c:2640 msgid "connection is already open" msgstr "链结已打开" #: src/main/connections.c:2673 msgid "unknown 'rw' value" msgstr "没有这样的'rw'值" #: src/main/connections.c:2744 msgid "cannot close standard connections" msgstr "无法关闭标准链结" #: src/main/connections.c:2747 msgid "cannot close output sink connection" msgstr "无法关闭外输汇集链结" #: src/main/connections.c:2749 msgid "cannot close messages sink connection" msgstr "无法关闭信息汇集链结" #: src/main/connections.c:2765 src/main/connections.c:4339 #: src/main/serialize.c:1643 src/main/serialize.c:1651 msgid "connection is not open" msgstr "链结没有打开" #: src/main/connections.c:2858 src/main/connections.c:2870 msgid "Line longer than buffer size" msgstr "行要比缓冲区大" #: src/main/connections.c:2916 src/main/connections.c:2930 #: src/main/connections.c:3177 src/main/connections.c:3188 #: src/main/connections.c:3691 src/main/connections.c:3711 src/main/dcf.c:48 #: src/main/dcf.c:54 src/main/saveload.c:2314 src/main/scan.c:916 #: src/main/scan.c:920 src/main/scan.c:1029 src/main/scan.c:1033 #: src/main/serialize.c:1645 src/main/source.c:253 src/main/source.c:256 msgid "cannot read from this connection" msgstr "无法从此链结读取" #: src/main/connections.c:2943 src/main/connections.c:2962 msgid "cannot allocate buffer in readLines" msgstr "无法给readLines分配缓冲区" #: src/main/connections.c:2984 #, c-format msgid "incomplete final line found on '%s'" msgstr "读'%s'时最后一行未遂" #: src/main/connections.c:2990 msgid "too few lines read in readLines" msgstr "readLines读的行数不够" #: src/main/connections.c:3083 msgid "incomplete string at end of file has been discarded" msgstr "略过文件末不完整的字符串" #: src/main/connections.c:3095 msgid "null terminator not found: breaking string at 10000 bytes" msgstr "没有null终止符: 字符串截断于10000个字节" #: src/main/connections.c:3158 src/main/saveload.c:2315 msgid "can only read from a binary connection" msgstr "无法读二进列链结" #: src/main/connections.c:3207 src/main/connections.c:3462 msgid "size changing is not supported for complex vectors" msgstr "不支持复数矢量大小的改变" #: src/main/connections.c:3232 src/main/connections.c:3250 #: src/main/connections.c:3276 src/main/connections.c:3320 #: src/main/connections.c:3340 src/main/connections.c:3443 #: src/main/connections.c:3456 src/main/connections.c:3515 #: src/main/connections.c:3547 #, c-format msgid "size %d is unknown on this machine" msgstr "本系统没有%d这样大小的值" #: src/main/connections.c:3261 msgid "raw is always of size 1" msgstr "raw的大小只能是一" #: src/main/connections.c:3369 msgid "'x' is not an atomic vector type" msgstr "'x'非基元矢量种类" #: src/main/connections.c:3375 msgid "can only write to a binary connection" msgstr "只能写入二进列链结" #: src/main/connections.c:3422 src/main/connections.c:3575 #: src/main/connections.c:3833 src/main/connections.c:3874 msgid "problem writing to connection" msgstr "写入链结有问题" #: src/main/connections.c:3467 msgid "size changing is not supported for raw vectors" msgstr "不支持原始矢量大小的改变" #: src/main/connections.c:3608 src/main/connections.c:3612 #: src/main/connections.c:3652 msgid "invalid UTF-8 input in readChar()" msgstr "readChar()的UTF-8输入有错" #: src/main/connections.c:3716 msgid "can only read in bytes in a non-UTF-8 MBCS locale" msgstr "在non-UTF-8 MBCS语言环境里只能读取字节" #: src/main/connections.c:3778 msgid "'object' is too short" msgstr "'object'太短" #: src/main/connections.c:3822 msgid "writeChar: more bytes requested than are in the string - will zero-pad" msgstr "writeChar：字符串的长度比需要的字节数目短-用零来补上" #: src/main/connections.c:3846 msgid "" "writeChar: more characters requested than are in the string - will zero-pad" msgstr "writeChar：字符串的长度比需要的字节数目短-用零来补上" #: src/main/connections.c:3908 src/main/connections.c:3911 #: src/main/connections.c:3949 src/main/connections.c:3954 msgid "could not allocate space for pushBack" msgstr "无法为pushBack分配空间" #: src/main/connections.c:3938 msgid "can only push back on open readable connections" msgstr "只能推回已打开的可读链结" #: src/main/connections.c:3940 msgid "can only push back on text-mode connections" msgstr "只能推回文字状态的链结" #: src/main/connections.c:4001 src/main/connections.c:4075 msgid "sink stack is full" msgstr "汇集堆叠满了" #: src/main/connections.c:4004 msgid "cannot switch output to stdin" msgstr "无法将输出转到stdin" #: src/main/connections.c:4031 msgid "no sink to remove" msgstr "没有可以除去的汇集" #: src/main/connections.c:4069 msgid "this platform does not support 'split=TRUE'" msgstr "这一版本不支持'split=TRUE'" #: src/main/connections.c:4157 #, c-format msgid "there is no connection %d" msgstr "没有%d链结" #: src/main/connections.c:4285 msgid "" "file(\"\") only supports open = \"w+\" and open = \"w+b\": using the former" msgstr "file(\"\")只支持open = \"w+\"和open = \"w+b\"这两种模式：现在使用前者" #: src/main/connections.c:4302 src/modules/internet/internet.c:113 #: src/modules/internet/internet.c:567 msgid "unsupported URL scheme" msgstr "不支持这种URL方案" #: src/main/connections.c:4392 msgid "file stream does not have gzip magic number" msgstr "文件串流没有gzip幻数" #: src/main/connections.c:4403 msgid "file stream does not have valid gzip header" msgstr "文件串流的gzip表头有错" #: src/main/connections.c:4469 msgid "writing error whilst flushing 'gzcon' connection" msgstr "清除'gzcon'链结时书写出错" #: src/main/connections.c:4572 #, c-format msgid "crc error %x %x\n" msgstr "crc错误%x%x\n" #: src/main/connections.c:4599 msgid "write error on 'gzcon' connection" msgstr "'gzcon'链结书写出错" #: src/main/connections.c:4633 msgid "'level' must be one of 0 ... 9" msgstr "'level’必需是0 ... 9之一" #: src/main/connections.c:4636 msgid "'allowNonCompression' must be TRUE or FALSE" msgstr "'allowNonCompression'的值要么是TRUE要么是FALSE" #: src/main/connections.c:4639 msgid "this is already a gzcon connection" msgstr "这已经是gzcon链结" #: src/main/connections.c:4645 msgid "can only use read- or write- binary connections" msgstr "只用读或写的二进列链结" #: src/main/connections.c:4648 msgid "using a text-mode 'file' connection may not work correctly" msgstr "文字方式的'file'联结有可能会出错" #: src/main/connections.c:4651 src/main/connections.c:4655 #: src/main/connections.c:4662 src/main/connections.c:4676 msgid "allocation of 'gzcon' connection failed" msgstr "分配'gzcon'链结失败" #: src/main/connections.c:4729 src/main/connections.c:4752 msgid "R_decompress1 requires a raw vector" msgstr "R_decompress1需要原始矢量" #: src/main/connections.c:4736 msgid "internal error in R_compress1" msgstr "R_compress1里发生了内部错误" #: src/main/connections.c:4757 msgid "internal error in R_decompress1" msgstr "R_decompress1里发生了内部错误" #: src/main/connections.c:4774 msgid "not a list of sockets" msgstr "非插坐串列" #: src/main/connections.c:4779 msgid "bad write indicators" msgstr "书写指示器有错" #: src/main/connections.c:4790 msgid "not a socket connection" msgstr "非插坐链结" #: src/main/context.c:124 msgid "" "bad target context--should NEVER happen;\n" "please bug.report() [R_run_onexits]" msgstr "" "目标上下文出了错，这是不应该发生的\n" "请用bug.report() [R_run_onexits]" #: src/main/context.c:280 msgid "no loop to break from, jumping to top level" msgstr "没有可中断的循环, 跳到最高层" #: src/main/context.c:288 msgid "no function to return from, jumping to top level" msgstr "没有可回归的函数, 跳到最高层" #: src/main/context.c:300 msgid "target context is not on the stack" msgstr "目标上下文不在堆叠上" #: src/main/context.c:322 src/main/context.c:338 src/main/context.c:403 #: src/main/context.c:415 src/main/context.c:427 src/main/context.c:439 msgid "not that many frames on the stack" msgstr "堆叠上没有这么多的环境框" #: src/main/context.c:355 msgid "only positive values of 'n' are allowed" msgstr "'n'只允许是正数" #: src/main/context.c:465 msgid "no function to restart" msgstr "没有重新开始的功能" #: src/main/context.c:546 msgid "internal error in 'do_sys'" msgstr "'do_sys'里发生了内部错误" #: src/main/cov.c:541 msgid "missing observations in cov/cor" msgstr "cov/cor中有遗漏值" #: src/main/cov.c:625 msgid "'x' is NULL" msgstr "'x'为NULL" #: src/main/cov.c:646 src/main/cov.c:652 msgid "incompatible dimensions" msgstr "不兼容的量度" #: src/main/cov.c:684 msgid "invalid 'use' (computational method)" msgstr "'use'不对(计算方法)" #: src/main/cov.c:687 msgid "'x' is empty" msgstr "'x'是空的" #: src/main/cov.c:712 src/main/cov.c:745 msgid "no complete element pairs" msgstr "不存在完的一对" #: src/main/cov.c:781 msgid "the standard deviation is zero" msgstr "标准差为零" #: src/main/cum.c:50 msgid "Integer overflow in 'cumsum'; use 'cumsum(as.numeric(.))'" msgstr "cumsum(.)中整数上溢；请用cumsum(as.numeric(.))" #: src/main/cum.c:183 msgid "min/max not defined for complex numbers" msgstr "min/max不适用于复数" #: src/main/cum.c:186 src/main/cum.c:207 src/main/cum.c:230 msgid "unknown cumxxx function" msgstr "没有cumxxx这个功能" #: src/main/datetime.c:511 src/main/datetime.c:517 src/main/datetime.c:531 #: src/main/datetime.c:536 msgid "problem with setting timezone" msgstr "设定时区时出了问题" #: src/main/datetime.c:521 msgid "cannot set timezones on this system" msgstr "无法为本系统设时差区" #: src/main/datetime.c:543 src/main/datetime.c:545 msgid "problem with unsetting timezone" msgstr "取消时区设制时出了问题" #: src/main/datetime.c:673 src/main/datetime.c:675 src/main/datetime.c:1023 #: src/main/datetime.c:1025 msgid "zero length component in non-empty POSIXlt structure" msgstr "非空的POSIXlt结构里含长度为零的部件" #: src/main/dcf.c:63 src/main/dcf.c:121 src/main/dcf.c:174 msgid "could not allocate memory for 'read.dcf'" msgstr "无法为'read.dcf'分配内存" #: src/main/dcf.c:105 #, c-format msgid "Found continuation line starting '%s ...' at begin of record." msgstr "在记录开始的地方'%s ...'不能有连续行" #: src/main/dcf.c:189 #, c-format msgid "Line starting '%s ...' is malformed!" msgstr "畸形'%s ...'开头行!" #: src/main/debug.c:42 msgid "argument must be a closure" msgstr "变元必需为闭合" #: src/main/debug.c:68 msgid "argument must be a function" msgstr "变元必需为函数" #: src/main/debug.c:120 src/main/debug.c:153 src/main/debug.c:208 msgid "argument must not be a function" msgstr "变元不能是函数" #: src/main/debug.c:123 msgid "cannot trace NULL" msgstr "无法跟踪NULL值" #: src/main/debug.c:127 msgid "'tracemem' is not useful for promise and environment objects" msgstr "'tracemem'对允諾和环境对象没有作用" #: src/main/debug.c:130 msgid "'tracemem' is not useful for weak reference or external pointer objects" msgstr "'tracemem'对弱引用或外指针对象没有作用" #: src/main/debug.c:136 src/main/debug.c:158 msgid "R was not compiled with support for memory profiling" msgstr "在编译R程序时没有建立存储轮廓这一功能" #: src/main/deparse.c:149 src/main/plot.c:908 src/main/plot.c:1445 #: src/main/plot.c:1768 src/main/plot.c:1836 src/main/plot.c:1915 #: src/main/plot.c:2013 src/main/plot.c:2091 src/main/plot.c:2372 #: src/main/plot.c:2550 src/main/plot.c:2769 src/main/plot.c:3309 #: src/main/plot.c:3437 src/main/plot.c:3516 src/main/plot.c:3687 #: src/main/plot.c:3964 src/main/plot3d.c:1360 src/main/sprintf.c:191 #: src/main/sprintf.c:219 msgid "too few arguments" msgstr "变元数目太少" #: src/main/deparse.c:156 msgid "invalid 'cutoff' for deparse, using default" msgstr "反向分析的'cutoff'值不对, 用缺省值" #: src/main/deparse.c:234 msgid "deparse of an S4 object will not be source()able" msgstr "反向分析S4目标对象是不能被source()" #: src/main/deparse.c:236 msgid "deparse may be incomplete" msgstr "反向分析可能不完全" #: src/main/deparse.c:238 msgid "deparse may be not be source()able in R < 2.7.0" msgstr "在R < 2.7.0的版本里deparse可能不可以被source()" #: src/main/deparse.c:317 src/main/deparse.c:403 src/main/deparse.c:409 msgid "wrote too few characters" msgstr "写了的字符数目太小" #: src/main/deparse.c:338 msgid "character arguments expected" msgstr "需要字符变元" #: src/main/deparse.c:341 msgid "zero length argument" msgstr "变元长度为零" #: src/main/deparse.c:348 msgid "'opts' should be small non-negative integer" msgstr "'opts'必需是小的非负整数" #: src/main/deparse.c:358 src/main/envir.c:1643 src/main/envir.c:1725 #: src/main/eval.c:420 src/main/eval.c:876 src/main/eval.c:2696 #: src/main/saveload.c:1964 src/main/saveload.c:2274 src/main/serialize.c:2250 #, c-format msgid "object '%s' not found" msgstr "找不到对象'%s'" #: src/main/deparse.c:1414 msgid "badly formed function expression" msgstr "函数表达式形式不对" #: src/main/deriv.c:119 msgid "invalid form in unary minus check" msgstr "检查一进列减号时发现形式不对" #: src/main/deriv.c:526 #, c-format msgid "Function '%s' is not in the derivatives table" msgstr "微分表里没有这个函数'%s'" #: src/main/deriv.c:633 msgid "variable must be a character string" msgstr "变数必需是字符串" #: src/main/deriv.c:635 src/main/envir.c:1521 msgid "only the first element is used as variable name" msgstr "只用了第一个元素作为变数名" #: src/main/deriv.c:648 #, fuzzy, c-format msgid "invalid expression in '%s'" msgstr "\"%s\"的表达式不对" #: src/main/deriv.c:931 src/main/model.c:1322 msgid "invalid variable names" msgstr "变数名字不对" #: src/main/deriv.c:940 msgid "invalid tag" msgstr "标签不对" #: src/main/devices.c:153 src/main/devices.c:160 msgid "no active or default device" msgstr "没有在使用中的或缺省的设备" #: src/main/devices.c:356 msgid "argument must have positive length" msgstr "变元的长度必需是正数" #: src/main/devices.c:431 src/main/devices.c:493 msgid "too many open devices" msgstr "太多已打开的设备" #: src/main/devices.c:520 msgid "not enough memory to allocate device (in GEcreateDevDesc)" msgstr "分配设备内存不够(GEcreateDevDesc)" #: src/main/devices.c:566 msgid "Hit to see next plot: " msgstr "按键来看下一个图: " #: src/main/dotcode.c:109 src/main/dotcode.c:139 msgid "NULL value passed as symbol address" msgstr "NULL值不能当作符号地址用" #: src/main/dotcode.c:144 src/main/dotcode.c:214 #, c-format msgid "symbol '%s' is too long" msgstr "符号'%s'太长" #: src/main/dotcode.c:162 msgid "'name' must be a string (of length 1) or native symbol reference" msgstr "'name'要么是字符串(长度为一)要么是本机符号引用" #: src/main/dotcode.c:201 src/main/dotcode.c:832 msgid "too many arguments in foreign function call" msgstr "外接函数调用时变元太多" #: src/main/dotcode.c:243 #, c-format msgid "%s symbol name \"%s\" not in DLL for package \"%s\"" msgstr "程序包'%3$s'的DLL没有\"%1$s\"字符名\"%2$s\" " #: src/main/dotcode.c:247 #, c-format msgid "%s symbol name \"%s\" not in load table" msgstr "载入表里没有\"%1$s\"字符名\"%2$s\"" #: src/main/dotcode.c:309 #, c-format msgid "" "explicit request not to duplicate arguments in call to '%s', but argument %d " "is of the wrong type (%d != %d)" msgstr "调用'%s'时明确要求不要复制变元，但变元%d的种类不对(%d != %d)" #: src/main/dotcode.c:335 #, c-format msgid "NAs in foreign function call (arg %d)" msgstr "外接函数调用时不能有NA(arg%d)" #: src/main/dotcode.c:349 #, c-format msgid "NA/NaN/Inf in foreign function call (arg %d)" msgstr "外接函数调用时不能有NA/NaN/Inf(arg%d)" #: src/main/dotcode.c:371 #, c-format msgid "complex NA/NaN/Inf in foreign function call (arg %d)" msgstr "外接函数调用时不能有复数的NA/NaN/Inf(arg%d)" #: src/main/dotcode.c:381 msgid "character variables must be duplicated in .C/.Fortran" msgstr "在调用.C/.Fortran时字符变数必需被复制" #: src/main/dotcode.c:386 msgid "only first string in char vector used in .Fortran" msgstr ".Fortran只能用字节矢量中的第一个字符串" #: src/main/dotcode.c:400 src/main/dotcode.c:529 #, c-format msgid "unsupported encoding '%s'" msgstr "不支持'%s'这个编码" #: src/main/dotcode.c:415 #, c-format msgid "conversion problem in re-encoding to '%s'" msgstr "转换编码'%s'时出了问题" #: src/main/dotcode.c:422 src/main/dotcode.c:551 msgid "re-encoding is not supported on this system" msgstr "本系统不支持编码转换" #: src/main/dotcode.c:438 msgid "lists must be duplicated in .C" msgstr "在调用.C时串列必需被复制" #: src/main/dotcode.c:448 src/main/dotcode.c:460 #, c-format msgid "invalid mode to pass to Fortran (arg %d)" msgstr "传给Fortran的状态出错(arg%d)" #: src/main/dotcode.c:543 #, c-format msgid "conversion problem in re-encoding from '%s'" msgstr "转换编码成'%s'时出了问题" #: src/main/dotcode.c:616 msgid "NAOK used more than once" msgstr "NAOK只能用一次" #: src/main/dotcode.c:620 msgid "DUP used more than once" msgstr "DUP只能用一次" #: src/main/dotcode.c:626 msgid "DLL name is too long" msgstr "DLL的名字值太长" #: src/main/dotcode.c:629 src/main/dotcode.c:689 src/main/dotcode.c:695 msgid "PACKAGE used more than once" msgstr "PACKAGE只能用一次" #: src/main/dotcode.c:668 msgid "PACKAGE argument must be a single character string" msgstr "PACKAGE变元必需是单个字符串" #: src/main/dotcode.c:674 msgid "PACKAGE argument is too long" msgstr "PACKAGE变元值太长" #: src/main/dotcode.c:718 src/main/dotcode.c:726 msgid "ENCODING used more than once" msgstr "ENCODING只能用一次" #: src/main/dotcode.c:720 src/main/dotcode.c:728 msgid "ENCODING argument must be a single character string" msgstr "ENCODING变元必需是单个字符串" #: src/main/dotcode.c:745 msgid "no arguments supplied" msgstr "没有提供变元" #: src/main/dotcode.c:746 src/main/seq.c:593 msgid "too many arguments" msgstr "变元太多" #: src/main/dotcode.c:797 src/main/dotcode.c:839 src/main/dotcode.c:1679 #, c-format msgid "Incorrect number of arguments (%d), expecting %d for %s" msgstr "变元数目不对(%1$d), %3$s只需要%2$d个变元" #: src/main/dotcode.c:1496 src/main/dotcode.c:2311 msgid "too many arguments, sorry" msgstr "对不起，变元太多" #: src/main/dotcode.c:1529 src/main/dotcode.c:1559 msgid "Invalid graphics state" msgstr "图形狀態出错" #: src/main/dotcode.c:1632 msgid "NULL value for DLLInfoReference when looking for DLL" msgstr "寻找DLL时DLLInfoReference的值是NULL" #: src/main/dotcode.c:1704 #, c-format msgid "Wrong type for argument %d in call to %s" msgstr "调用%2$s时变元%1$d的种类不对" #: src/main/dotcode.c:2405 #, c-format msgid "type \"%s\" not supported in interlanguage calls" msgstr "不同语言调用不支持这一种类\"%s\"" #: src/main/dotcode.c:2417 msgid "invalid function in call_R" msgstr "call_R中的函数不对" #: src/main/dotcode.c:2419 msgid "invalid argument count in call_R" msgstr "call_R的变元数目不对" #: src/main/dotcode.c:2421 msgid "invalid return value count in call_R" msgstr "call_R的回覆值数目不对" #: src/main/dotcode.c:2464 #, c-format msgid "mode '%s' is not supported in call_R" msgstr "call_R不支持'%s'状态" #: src/main/dounzip.c:109 #, fuzzy, c-format msgid " not overwriting file '%s" msgstr "无法打开文件'%s'" #: src/main/dounzip.c:188 #, fuzzy, c-format msgid "zip file '%s' cannot be opened" msgstr "无法载入lapack 例行程序s" #: src/main/dounzip.c:240 msgid "invalid zip name argument" msgstr "zip名字变元不对" #: src/main/dounzip.c:243 src/main/dounzip.c:328 msgid "zip path is too long" msgstr "zip路径太长" #: src/main/dounzip.c:260 msgid "'destination' is too long" msgstr "'destination'太长" #: src/main/dounzip.c:263 msgid "'destination' does not exist" msgstr "'destination'不存在" #: src/main/dounzip.c:287 msgid "requested file not found in the zip file" msgstr "你所要求的文件在zip文件中没有" #: src/main/dounzip.c:290 msgid "zip file is corrupt" msgstr "zip文件有损坏" #: src/main/dounzip.c:293 msgid "CRC error in zip file" msgstr "zip文件出了CRC错误" #: src/main/dounzip.c:297 msgid "internal error in unz code" msgstr "unz写码发生了内部错误" #: src/main/dounzip.c:300 msgid "write error in extracting from zip file" msgstr "抽取zip文件时出现了书写错误" #: src/main/dounzip.c:303 #, c-format msgid "error %d in extracting from zip file" msgstr "从zip文件中抽取%d时出了错" #: src/main/dounzip.c:323 msgid "unz connections can only be opened for reading" msgstr "unz链结只可读不可写" #: src/main/dounzip.c:334 msgid "invalid description of unz connection" msgstr "unz链结的描述不对" #: src/main/dounzip.c:340 #, c-format msgid "cannot open zip file '%s'" msgstr "无法打开zip文件'%s'" #: src/main/dounzip.c:344 #, c-format msgid "cannot locate file '%s' in zip file '%s'" msgstr "在zip文件'%2$s'里找不到%1$s这个文件" #: src/main/dounzip.c:388 msgid "printing not enabled for this connection" msgstr "此链结无法打印" #: src/main/dounzip.c:395 msgid "write not enabled for this connection" msgstr "无法对这个链结书写" #: src/main/dounzip.c:415 src/main/dounzip.c:419 src/main/dounzip.c:425 #: src/main/dounzip.c:442 msgid "allocation of unz connection failed" msgstr "分配unz链结失败" #: src/main/dstruct.c:59 msgid "invalid formal arguments for \"function\"" msgstr "\"function\"的正式变元不对" #: src/main/dstruct.c:71 msgid "" "invalid body argument for \"function\"\n" "Should NEVER happen; please bug.report() [mkCLOSXP]" msgstr "\"function\"主体变元有错。这不应该发生，请用bug.report() [mkCLOSXP]" #: src/main/engine.c:42 msgid "Graphics API version mismatch" msgstr "图形API版本不相符" #: src/main/engine.c:114 src/main/engine.c:177 msgid "unable to allocate memory (in GEregister)" msgstr "无法分配内存(GEregister)" #: src/main/engine.c:148 msgid "too many graphics systems registered" msgstr "注册了太多的图形系统" #: src/main/engine.c:195 msgid "no graphics system to unregister" msgstr "没有可以取消注册的图形系统" #: src/main/engine.c:430 src/main/engine.c:435 src/main/engine.c:443 #: src/main/engine.c:450 src/main/engine.c:464 src/modules/X11/devX11.c:996 msgid "invalid line end" msgstr "行终点出错" #: src/main/engine.c:495 src/main/engine.c:500 src/main/engine.c:508 #: src/main/engine.c:515 src/main/engine.c:529 src/modules/X11/devX11.c:1014 msgid "invalid line join" msgstr "行接合出错" #: src/main/engine.c:783 msgid "out of memory while clipping polyline" msgstr "剪裁多重线的时候内存不够" #: src/main/engine.c:1538 #, c-format msgid "font face %d not supported for font family '%s'" msgstr "模面%1$d不支持字模家族'%2$s'" #: src/main/engine.c:1848 msgid "no graphics device is active" msgstr "没有活动图形设备" #: src/main/engine.c:1929 #, c-format msgid "pch value '%d' is invalid in this locale" msgstr "'%d'这个pch值在本语言环境下不适用" #: src/main/engine.c:2186 #, c-format msgid "unimplemented pch value '%d'" msgstr "目前没有实现pch '%d'这样一个值" #: src/main/engine.c:2209 #, c-format msgid "invalid axis extents [GEPretty(.,.,n=%d)" msgstr "座标范围不对[GEPretty(.,.,n=%d)" #: src/main/engine.c:2213 #, c-format msgid "infinite axis extents [GEPretty(%g,%g,%d)]" msgstr "座标范围不能是无限值[GEPretty(%g,%g,%d)]" #: src/main/engine.c:2251 #, c-format msgid " .. GEPretty(.): new *lo = %g < %g = x1" msgstr " .. GEPretty(.): new *lo =%g <%g = x1" #: src/main/engine.c:2253 #, c-format msgid " .. GEPretty(.): new *up = %g > %g = x2" msgstr " .. GEPretty(.): new *up =%g >%g = x2" #: src/main/engine.c:2578 msgid "Display list redraw incomplete" msgstr "显示串列没有完全被刷新" #: src/main/engine.c:2762 msgid "'expr' argument must be an expression" msgstr "'expr'变元必需是表达式" #: src/main/engine.c:2764 msgid "'list' argument must be a list" msgstr "'list'变元必需是串列" #: src/main/engine.c:2770 msgid "'env' argument must be an environment" msgstr "'env'变元必需是环境" #: src/main/engine.c:2792 src/main/graphics.c:2391 msgid "invalid graphics state" msgstr "图形狀態不对" #: src/main/engine.c:2851 src/main/engine.c:2859 msgid "invalid multibyte char in pch=\"c\"" msgstr "pch=\"c\"里的多字节字元不对" #: src/main/engine.c:2930 msgid "invalid line type: must be length 2, 4, 6 or 8" msgstr "行类不对: 长度必需是2, 4, 6或8" #: src/main/engine.c:2934 msgid "invalid line type: zeroes are not allowed" msgstr "排类别不对：不能有零值" #: src/main/engine.c:2943 src/main/engine.c:2951 src/main/engine.c:2958 msgid "invalid line type" msgstr "行类不对" #: src/main/envir.c:111 src/main/envir.c:123 #, c-format msgid "cannot change value of locked binding for '%s'" msgstr "无法改变被锁定的联编'%s'的值" #: src/main/envir.c:229 src/main/envir.c:1369 msgid "cannot add bindings to a locked environment" msgstr "无法为被锁定的环境添加联编" #: src/main/envir.c:718 msgid "invalid cached value in R_GetGlobalCache" msgstr "R_GetGlobalCache里的高速缓存值不对" #: src/main/envir.c:772 msgid "cannot unbind in the base namespace" msgstr "无法在基本名字空间里切断联编" #: src/main/envir.c:774 msgid "unbind in the base environment is unimplemented" msgstr "在基本环境里切断联编这功能还没有被实现" #: src/main/envir.c:776 src/main/envir.c:1566 msgid "cannot remove bindings from a locked environment" msgstr "无法从锁定的环境中删除联编" #: src/main/envir.c:1068 #, c-format msgid "argument to '%s' is not an environment" msgstr "变元'%s'不是环境" #: src/main/envir.c:1232 #, c-format msgid "The ... list does not contain %d elements" msgstr "... 串列不包含%d元素" #: src/main/envir.c:1238 #, c-format msgid "..%d used in an incorrect context, no ... to look in" msgstr "..%d所在的上下文出了错, 没有可以搜索的..." #: src/main/envir.c:1309 src/main/envir.c:1721 src/main/eval.c:424 #: src/main/eval.c:2699 #, c-format msgid "argument \"%s\" is missing, with no default" msgstr "缺少变元\"%s\",也没有缺省值" #: src/main/envir.c:1314 #, c-format msgid "could not find function \"%s\"" msgstr "没有\"%s\"这个函数" #: src/main/envir.c:1337 msgid "cannot assign values in the empty environment" msgstr "无法在空环境里分派数值" #: src/main/envir.c:1343 src/main/envir.c:1412 msgid "cannot assign variables to this database" msgstr "无法给这个数据库指定变数" #: src/main/envir.c:1495 #, c-format msgid "cannot add binding of '%s' to the base environment" msgstr "无法在基本环境里加联编'%s' " #: src/main/envir.c:1560 msgid "cannot remove variables from base namespace" msgstr "无法从基本名字空间里删除变数" #: src/main/envir.c:1562 msgid "cannot remove variables from the base environment" msgstr "无法从基本环境中删除变数" #: src/main/envir.c:1564 msgid "cannot remove variables from the empty environment" msgstr "无法从空环境中删除变数" #: src/main/envir.c:1572 msgid "cannot remove variables from this database" msgstr "无法从这个数据库中删除变数" #: src/main/envir.c:1728 #, fuzzy, c-format msgid "object '%s' of mode '%s' was not found" msgstr "没有状态为\"%2$s\"这样的变数\"%1$s\"" #: src/main/envir.c:1795 #, c-format msgid "invalid name in position %d" msgstr "在%d位置的名字不对" #: src/main/envir.c:1803 msgid "second argument must be an environment" msgstr "第二变元必需是环境" #: src/main/envir.c:1811 src/main/envir.c:1819 #, c-format msgid "wrong length for '%s' argument" msgstr "'%s'变元的长度不对" #: src/main/envir.c:1953 msgid "invalid use of 'missing'" msgstr "’missing'的用法不对" #: src/main/envir.c:1978 msgid "'missing' can only be used for arguments" msgstr "missing只能用于这些变元" #: src/main/envir.c:2059 msgid "'pos' must be an integer" msgstr "'pos'的值必需是整数" #: src/main/envir.c:2073 msgid "all elements of a list must be named" msgstr "所有的串列都必需带名字" #: src/main/envir.c:2096 msgid "'attach' only works for lists, data frames and environments" msgstr "'attach'只适用于串列，数据框和环境" #: src/main/envir.c:2179 msgid "detaching \"package:base\" is not allowed" msgstr "\"package:base\"不能被拆离" #: src/main/envir.c:2474 src/main/envir.c:2527 msgid "argument must be an environment" msgstr "变元必需是环境" #: src/main/envir.c:2531 msgid "arguments must be symbolic" msgstr "变元必需为符号" #: src/main/envir.c:2634 src/main/random.c:35 src/main/random.c:567 msgid "invalid arguments" msgstr "变元不对" #: src/main/envir.c:2692 msgid "no enclosing environment" msgstr "没有封闭环境" #: src/main/envir.c:2740 #, c-format msgid "no item called \"%s\" on the search list" msgstr "寻找串列里没有\"%s\"这样一个项目" #: src/main/envir.c:2759 msgid "using 'as.environment(NULL)' is defunct" msgstr "'as.environment(NULL)'不再有用" #: src/main/envir.c:2764 #, fuzzy msgid "S4 object does not extend class \"environment\"" msgstr "替换对象不是环境" #: src/main/envir.c:2769 msgid "invalid object for 'as.environment'" msgstr "as.environment的对象不对" #: src/main/envir.c:2793 src/main/envir.c:2820 src/main/envir.c:2848 #: src/main/envir.c:2868 src/main/envir.c:2890 src/main/envir.c:2924 #: src/main/envir.c:2944 msgid "not an environment" msgstr "不是环境" #: src/main/envir.c:2844 src/main/envir.c:2864 src/main/envir.c:2884 #: src/main/envir.c:2920 src/main/envir.c:2940 src/main/envir.c:3038 msgid "not a symbol" msgstr "不是符号" #: src/main/envir.c:2856 src/main/envir.c:2876 src/main/envir.c:2932 #: src/main/envir.c:2952 #, c-format msgid "no binding for \"%s\"" msgstr "\"%s\"没有联编" #: src/main/envir.c:2886 msgid "not a function" msgstr "不是函数" #: src/main/envir.c:2893 src/main/envir.c:2909 msgid "symbol already has a regular binding" msgstr "符号已经有了正式联编" #: src/main/envir.c:2895 src/main/envir.c:2911 msgid "cannot change active binding if binding is locked" msgstr "无法改变被锁定的联编" #: src/main/envir.c:2997 msgid "unknown op" msgstr "没有这种运算符" #: src/main/envir.c:3042 msgid "cannot unbind a locked binding" msgstr "无法切斷已经锁定了的联编" #: src/main/envir.c:3044 msgid "cannot unbind an active binding" msgstr "无法切斷正在使用中的联编" #: src/main/envir.c:3181 msgid "bad name space name" msgstr "名字空间名字不对" #: src/main/envir.c:3193 msgid "name space already registered" msgstr "名字空间已经注册了" #: src/main/envir.c:3205 msgid "name space not registered" msgstr "名字空间没有注册" #: src/main/envir.c:3251 msgid "bad import environment argument" msgstr "引进环境变元不对" #: src/main/envir.c:3255 msgid "bad export environment argument" msgstr "引出环境变元不对" #: src/main/envir.c:3259 msgid "length of import and export names must match" msgstr "引进和引出名字的长度必需相等" #: src/main/envir.c:3282 #, c-format msgid "exported symbol '%s' has no value" msgstr "引出的符号’%s'没有值" #: src/main/envir.c:3481 #, c-format msgid "truncating string with embedded nul: '%s'" msgstr "切断嵌nul的文字串:'%s'" #: src/main/errors.c:181 src/main/errors.c:218 msgid "interrupts suspended; signal ignored" msgstr "暫停中断; 略过信号" #: src/main/errors.c:313 msgid "invalid option \"warning.expression\"" msgstr "\"warning.expression\"选项不对" #: src/main/errors.c:343 #, c-format msgid "(converted from warning) %s" msgstr "(由警告转换成)%s" #: src/main/errors.c:354 #, c-format msgid "Warning: %s\n" msgstr "警告: %s\n" #: src/main/errors.c:358 src/main/errors.c:361 #, c-format msgid "Warning in %s : %s\n" msgstr "%s里有警告: %s\n" #: src/main/errors.c:363 #, c-format msgid "" "Warning in %s :\n" " %s\n" msgstr "" "%s里有警告:\n" " %s\n" #: src/main/errors.c:427 src/main/errors.c:445 src/main/errors.c:575 msgid "Lost warning messages\n" msgstr "警告信息丢失\n" #: src/main/errors.c:518 #, c-format msgid "There were %d warnings (use warnings() to see them)\n" msgstr "共有%d个警告 (用warnings()来显示)\n" #: src/main/errors.c:521 msgid "There were 50 or more warnings (use warnings() to see the first 50)\n" msgstr "警告多于50个(用warnings()来显示第一个到第五十个)\n" #: src/main/errors.c:566 msgid "Error during wrapup: " msgstr "收捲时出错: " #: src/main/errors.c:591 msgid "Error in " msgstr "错误于" #: src/main/errors.c:619 src/main/errors.c:624 #, c-format msgid "Error: " msgstr "错误: " #: src/main/errors.c:643 src/main/errors.c:1266 msgid "In addition: " msgstr "此外: " #: src/main/errors.c:764 msgid "invalid option \"error\"\n" msgstr "选项\"error\"不对\n" #: src/main/errors.c:844 msgid "Execution halted\n" msgstr "停止执行\n" #: src/main/errors.c:979 #, c-format msgid "invalid '%s' arguemnt" msgstr "'%s'变元不对" #: src/main/errors.c:981 msgid "'msg1' must be a character string" msgstr "'msg1’必需是字符串" #: src/main/errors.c:983 msgid "'msg2' must be a character string" msgstr "'msg2’必需是字符串" #: src/main/errors.c:1078 msgid " [invalid string in stop(.)]" msgstr " [stop(.)里的字符串不对]" #: src/main/errors.c:1104 msgid " [invalid string in warning(.)]" msgstr " [warning(.)里的字符串不对]" #: src/main/errors.c:1119 #, c-format msgid "incorrect number of arguments to \"%s\"" msgstr "\"%s\"里的变元数目不对" #: src/main/errors.c:1125 src/main/errors.c:1140 #, c-format msgid "unimplemented feature in %s" msgstr "%s里的功能目前没有实现" #: src/main/errors.c:1137 msgid "time-series/vector length mismatch" msgstr "时间系列/矢量长度不等" #: src/main/errors.c:1138 msgid "incompatible arguments" msgstr "不可兼容的变元" #: src/main/errors.c:1141 msgid "unknown error (report this!)" msgstr "不知是什么错误(请报告!)" #: src/main/errors.c:1153 msgid "unknown warning (report this!)" msgstr "不知是什么警告(请报告!)" #: src/main/errors.c:1231 msgid "No function to return from, jumping to top level" msgstr "没有可回归的函数, 跳到最高层" #: src/main/errors.c:1247 msgid "top level inconsistency?" msgstr "最高层不一致？" #: src/main/errors.c:1408 msgid "bad handler data" msgstr "处理器数据有错" #: src/main/errors.c:1559 msgid "error message not a string" msgstr "错误信息不是字符串" #: src/main/errors.c:1634 msgid "handler or restart stack mismatch in old restart" msgstr "旧重新启动里的处理器或重新启动堆叠不相配" #: src/main/errors.c:1660 src/main/errors.c:1676 msgid "bad error message" msgstr "错误信息不对" #: src/main/errors.c:1718 msgid "bad restart" msgstr "重新启动出错" #: src/main/errors.c:1750 msgid "restart not on stack" msgstr "不能在堆叠上重新启动" #: src/main/errors.c:1767 msgid "not in a try context" msgstr "不在try的上下文中" #: src/main/errors.c:1780 msgid "error message must be a character string" msgstr "错误信息必需是字符串" #: src/main/eval.c:235 #, c-format msgid "Rprof: cannot open profile file '%s'" msgstr "Rprof: 无法打开程序概要分析文件'%s'" #: src/main/eval.c:276 msgid "can't use R profiling while byte code profiling" msgstr "在进行一位元組碼程序概要分析的同时不能用R来进行程序概要分析" #: src/main/eval.c:296 msgid "R profiling is not available on this system" msgstr "本系统没有R程序概要分析这个功能" #: src/main/eval.c:320 msgid "" "promise already under evaluation: recursive default argument reference or " "earlier problems?" msgstr "已经在评估：递归缺省变元参考还是早先原来的问题？" #: src/main/eval.c:322 msgid "restarting interrupted promise evaluation" msgstr "重新评估被中断的许诺" #: src/main/eval.c:364 msgid "" "evaluation nested too deeply: infinite recursion / options(expressions=)?" msgstr "评估嵌套太深：无穷递归/ options(expressions=)?" #: src/main/eval.c:414 src/main/eval.c:513 src/main/eval.c:1523 #: src/main/eval.c:1585 src/main/eval.c:1640 src/main/eval.c:1891 #: src/main/eval.c:3266 src/main/eval.c:3373 msgid "'...' used in an incorrect context" msgstr "'...'用在的上下文不对" #: src/main/eval.c:426 src/main/eval.c:2700 msgid "argument is missing, with no default" msgstr "缺少变元, 也没有缺省值" #: src/main/eval.c:509 src/main/eval.c:3214 msgid "attempt to apply non-function" msgstr "不适用于非函数" #: src/main/eval.c:804 #, c-format msgid "could not find symbol \"%s\" in environment of the generic function" msgstr "类属函数环境里没有这个\"%s\"符号" #: src/main/eval.c:822 #, c-format msgid "symbol \"%s\" not in environment of method" msgstr "方法环境里没有\"%s\"这个符号" #: src/main/eval.c:931 msgid "the condition has length > 1 and only the first element will be used" msgstr "条件的长度大于一，因此只能用其第一元素" #: src/main/eval.c:948 msgid "missing value where TRUE/FALSE needed" msgstr "需要TRUE/FALSE值的地方不可以用缺少值" #: src/main/eval.c:949 msgid "argument is not interpretable as logical" msgstr "变元不能作为逻辑值来用" #: src/main/eval.c:950 msgid "argument is of length zero" msgstr "变元长度为零" #: src/main/eval.c:998 msgid "non-symbol loop variable" msgstr "非符号循环变数" #: src/main/eval.c:1082 msgid "invalid for() loop sequence" msgstr "for()循环顺序不对" #: src/main/eval.c:1208 msgid "'...' not allowed in return" msgstr "回覆值里不能有'...'" #: src/main/eval.c:1222 msgid "multi-argument returns are deprecated" msgstr "已经不再用多变元回覆值这一功能了" #: src/main/eval.c:1225 msgid "empty expression in return value" msgstr "回覆值里的表达式是空的" #: src/main/eval.c:1279 msgid "invalid (NULL) left side of assignment" msgstr "赋值公式左手不能是(NULL)值" #: src/main/eval.c:1301 msgid "target of assignment expands to non-language object" msgstr "赋值目标擴充到非语言对象" #: src/main/eval.c:1346 msgid "cannot do complex assignments in base namespace" msgstr "无法在基本名字空间里赋复数值" #: src/main/eval.c:1348 msgid "cannot do complex assignments in base environment" msgstr "无法在基本环境里赋复数值" #: src/main/eval.c:1368 src/main/eval.c:1386 msgid "invalid function in complex assignment" msgstr "复数赋值里的函数不对" #: src/main/eval.c:1370 src/main/eval.c:1388 #, c-format msgid "overlong name in '%s'" msgstr "'%s'中的名字太长" #: src/main/eval.c:1462 msgid "invalid (do_set) left-hand side to assignment" msgstr "(do_set)赋值公式左手不对" #: src/main/eval.c:1477 msgid "invalid assignment left-hand side" msgstr "赋值公式左手不对" #: src/main/eval.c:1533 #, c-format msgid "" "element %d is empty;\n" " the part of the args list of a builtin being evaluated was:\n" " %s" msgstr "" "%d元素是空的;\n" " 一部分内部函数变元串列评估为:\n" " %s" #: src/main/eval.c:1537 #, c-format msgid "" "element %d is empty;\n" " the part of the args list of '%s' being evaluated was:\n" " %s" msgstr "" "%d元素是空的;\n" " 一部分'%s'变元串列评估为:\n" " %s" #: src/main/eval.c:1671 msgid "invalid formal argument list for \"function\"" msgstr "\"function\"正式变元串列不对" #: src/main/eval.c:1717 msgid "numeric 'envir' arg not of length one" msgstr "数值'envir'变元的长度不是一" #: src/main/eval.c:1739 src/main/eval.c:1758 msgid "restarts not supported in 'eval'" msgstr "'eval'不支持重新启动" #: src/main/eval.c:1823 msgid "'Recall' called from outside a closure" msgstr "'Recall'在封閉包外调用" #: src/main/eval.c:1885 msgid "value in '...' is not a promise" msgstr "'... '里的值不是允諾" #: src/main/eval.c:2095 src/main/objects.c:696 #, c-format msgid "call name too long in '%s'" msgstr "'%s'里调用的名字太长" #: src/main/eval.c:2116 #, c-format msgid "generic name too long in '%s'" msgstr "'%s'里的类属名字太长" #: src/main/eval.c:2180 #, c-format msgid "Incompatible methods (\"%s\", \"%s\") for \"%s\"" msgstr "不可兼容的方法(\"%s\", \"%s\")和\"%s\"" #: src/main/eval.c:2242 msgid "dispatch error in group dispatch" msgstr "组分派错误" #: src/main/eval.c:2623 msgid "node stack overflow" msgstr "节点堆叠上溢" #: src/main/eval.c:2629 msgid "integer stack overflow" msgstr "整数堆叠上溢" #: src/main/eval.c:2682 msgid "Bad opcode" msgstr "op代码不对" #: src/main/eval.c:2831 msgid "not a vector object" msgstr "非矢量对象" #: src/main/eval.c:2839 src/main/eval.c:2861 src/main/eval.c:2885 #: src/main/eval.c:2909 msgid "can only handle simple real vectors" msgstr "只能用简单的实数矢量" #: src/main/eval.c:2848 src/main/eval.c:2895 msgid "not a simple vector" msgstr "非简单矢量" #: src/main/eval.c:2865 src/main/eval.c:2913 src/main/subassign.c:972 #: src/main/subset.c:808 msgid "incorrect number of subscripts" msgstr "下标数目不对" #: src/main/eval.c:2876 src/main/eval.c:2927 msgid "not a simple matrix" msgstr "非简单矩阵" #: src/main/eval.c:2964 msgid "bytecode version mismatch; using eval" msgstr "位元組碼版本不配; 用eval" #: src/main/eval.c:2969 msgid "bytecode version is too old" msgstr "位元組碼版本太旧" #: src/main/eval.c:2970 msgid "bytecode version is too new" msgstr "位元組碼版本太新" #: src/main/eval.c:2975 msgid "byte code version mismatch" msgstr "位元組碼版本不配" #: src/main/eval.c:2991 msgid "missing value where logical needed" msgstr "需要逻辑值的地方不能用缺少值" #: src/main/eval.c:2992 msgid "argument of if(*) is not interpretable as logical" msgstr "if(*)的变元不能作为逻辑值来用" #: src/main/eval.c:3026 msgid "invalid sequence argument in for loop" msgstr "循环里的顺序变元不对" #: src/main/eval.c:3176 src/main/eval.c:3197 src/main/eval.c:3311 msgid "not a BUILTIN function" msgstr "非BUILTIN函数" #: src/main/eval.c:3297 msgid "bad function" msgstr "函数不对" #: src/main/eval.c:3337 msgid "not a SPECIAL function" msgstr "非SPECIAL函数" #: src/main/eval.c:3571 msgid "cannot find index for threaded code address" msgstr "找不到线程代码地址的索引" #: src/main/eval.c:3651 msgid "invalid symbol" msgstr "符号不对" #: src/main/eval.c:3695 msgid "argument is not a byte code object" msgstr "变元不是位元组码对象" #: src/main/eval.c:3716 msgid "bad file name" msgstr "文件名字不对" #: src/main/eval.c:3720 src/main/eval.c:3741 msgid "unable to open 'file'" msgstr "无法打开'file'" #: src/main/eval.c:3735 src/main/saveload.c:1928 msgid "'file' must be non-empty string" msgstr "'file'必需是非空字符串" #: src/main/eval.c:3737 src/main/saveload.c:1930 src/main/saveload.c:2219 #: src/main/serialize.c:1786 msgid "'ascii' must be logical" msgstr "'ascii’必需是逻辑值" #: src/main/eval.c:3766 src/main/eval.c:3773 msgid "R_CompiledFileName: buffer too small" msgstr "R_CompiledFileName: 缓冲区太小" #: src/main/eval.c:3806 msgid "code must be a generic vector" msgstr "代码必需是矢量类属" #: src/main/eval.c:3845 msgid "profile timer in use" msgstr "程序概要分析计时器在运行中" #: src/main/eval.c:3847 msgid "already byte code profiling" msgstr "已经在进行位元组码程序概要分析" #: src/main/eval.c:3865 msgid "setting profile timer failed" msgstr "程序概要分析计时器设制失败" #: src/main/eval.c:3882 msgid "not byte code profiling" msgstr "非位元组码程序概要分析" #: src/main/fourier.c:54 src/main/fourier.c:145 src/main/summary.c:753 msgid "non-numeric argument" msgstr "非数值变元" #: src/main/fourier.c:72 src/main/fourier.c:87 src/main/fourier.c:159 msgid "fft factorization error" msgstr "fft因数分解错误" #: src/main/fourier.c:131 msgid "vector-valued (multivariate) series required" msgstr "需要矢量值系列(多变数)" #: src/main/fourier.c:203 msgid "no factors" msgstr "非因子" #: src/main/fourier.c:206 msgid "invalid factors" msgstr "因子不对" #: src/main/gevents.c:40 msgid "graphics device does not support graphics events" msgstr "图形设备不支持图形事件" #: src/main/gevents.c:43 msgid "invalid prompt" msgstr "提示不对" #: src/main/gevents.c:49 msgid "'onMouseDown' not supported" msgstr "不支持'onMouseDown' " #: src/main/gevents.c:51 msgid "invalid 'onMouseDown' callback" msgstr "'onMouseDown'回叫出错" #: src/main/gevents.c:57 msgid "'onMouseMove' not supported" msgstr "不支持'onMouseMove'" #: src/main/gevents.c:59 msgid "invalid 'onMouseMove' callback" msgstr "'onMouseMove'回叫出错" #: src/main/gevents.c:65 msgid "'onMouseUp' not supported" msgstr "不支持'onMouseUp'" #: src/main/gevents.c:67 msgid "invalid 'onMouseUp' callback" msgstr "'onMouseUp'回叫不对" #: src/main/gevents.c:73 msgid "'onKeybd' not supported" msgstr "不支持'onKeybd'" #: src/main/gevents.c:75 msgid "invalid 'onKeybd' callback" msgstr "'onKeybd'回叫不对" #: src/main/gram.y:138 src/main/gram.y:152 #, c-format msgid "EOF whilst reading MBCS char at line %d" msgstr "%d行读MBCS字节时遇到EOF" #: src/main/gram.y:141 src/main/gram.y:149 #, c-format msgid "invalid multibyte character in parser at line %d" msgstr "句法分析器%d行里不能有多字节字符" #: src/main/gram.y:425 #, c-format msgid "function is too long to keep source (at line %d)" msgstr "函数太长，无法保留其代码(%d行)" #: src/main/gram.y:978 #, c-format msgid "incorrect tag type at line %d" msgstr "%d行的标记种类不对" #: src/main/gram.y:1424 msgid "contextstack overflow" msgstr "节点堆叠上溢" #: src/main/gram.y:1660 msgid "input" msgstr "输入" #: src/main/gram.y:1661 msgid "end of input" msgstr "输入结束" #: src/main/gram.y:1662 msgid "string constant" msgstr "字符常量" #: src/main/gram.y:1663 msgid "numeric constant" msgstr "数值量" #: src/main/gram.y:1664 msgid "symbol" msgstr "符号" #: src/main/gram.y:1665 msgid "assignment" msgstr "任务" #: src/main/gram.y:1666 msgid "end of line" msgstr "行尾" #: src/main/gram.y:1680 src/main/gram.y:1686 #, c-format msgid "unexpected %s" msgstr "意外的%s" #: src/main/gram.y:1696 #, c-format msgid "Repeated formal argument '%s' on line %d" msgstr "%2$d行上有重复正式变元'%1$s'" #: src/main/gram.y:1714 #, c-format msgid "input buffer overflow at line %d" msgstr "%d行输入缓冲区上溢" #: src/main/gram.y:1849 #, c-format msgid "integer literal %sL contains decimal; using numeric value" msgstr "整数文字%sL里有小数点；转用数值" #: src/main/gram.y:1851 #, c-format msgid "non-integer value %s qualified with L; using numeric value" msgstr "同L一起修饰的%s是非整数值; 转用数值" #: src/main/gram.y:1862 #, c-format msgid "integer literal %sL contains unnecessary decimal point" msgstr "整数文字%sL里含多余的小数点" #: src/main/gram.y:1894 #, c-format msgid "unable to allocate buffer for long string at line %d" msgstr "%d行无法为长字符串分配内存" #: src/main/gram.y:2005 msgid "'\\x' used without hex digits" msgstr "'\\x'必需同hex数字一起使用" #: src/main/gram.y:2017 #, c-format msgid "\\uxxxx sequences not supported (line %d)" msgstr "不支持\\uxxxx这样的序列(%d行)" #: src/main/gram.y:2037 msgid "\\u used without hex digits" msgstr "\\u必需同hex数字一起使用" #: src/main/gram.y:2047 src/main/gram.y:2060 #, c-format msgid "invalid \\u{xxxx} sequence (line %d)" msgstr "\\u{xxxx}顺序不对(%d行)" #: src/main/gram.y:2062 #, c-format msgid "invalid \\uxxxx sequence (line %d)" msgstr "\\uxxxx 顺序不对(%d行)" #: src/main/gram.y:2071 #, c-format msgid "\\Uxxxxxxxx sequences not supported (line %d)" msgstr "不支持\\uxxxx这样的序列(%d行)" #: src/main/gram.y:2091 msgid "\\U used without hex digits" msgstr "\\U必需同hex数字一起使用" #: src/main/gram.y:2101 src/main/gram.y:2107 #, c-format msgid "invalid \\U{xxxxxxxx} sequence (line %d)" msgstr "\\U{xxxxxxxx}顺序不对(%d行)" #: src/main/gram.y:2109 #, c-format msgid "invalid \\Uxxxxxxxx sequence (line %d)" msgstr "\\Uxxxxxxxx顺序不对(%d行)" #: src/main/gram.y:2150 #, c-format msgid "'\\%c' is an unrecognized escape in a character string" msgstr "不认识字符串里'\\%c'这样的逸出号" #: src/main/gram.y:2202 #, c-format msgid "" "string at line %d containing Unicode escapes not in this locale\n" "is too long (max 1000 chars)" msgstr "" "%d行字符串里包含了不属于目前语言环境的Unicode转义字符太长了(最多只能有1000个" "字符)" #: src/main/gram.y:2211 #, c-format msgid "unrecognized escape removed from \"%s\"" msgid_plural "unrecognized escapes removed from \"%s\"" msgstr[0] "从\"%s\"里删除了不认识的逸出号" #: src/main/gram.y:2321 #, c-format msgid "functions nested too deeply in source code at line %d" msgstr "%d行代码源里的函数功能嵌套太深" #: src/main/gram.y:2719 src/main/gram.y:2726 src/main/gram.y:2732 #: src/main/gram.y:2739 #, c-format msgid "contextstack overflow at line %d" msgstr "%d行上下文堆叠上溢" #: src/main/graphics.c:287 #, c-format msgid "bad units specified in '%s'" msgstr "'%s'里的单位设定不对" #: src/main/graphics.c:1777 src/main/graphics.c:1799 msgid "attempt to plot on null device" msgstr "null设备上不能绘图" #: src/main/graphics.c:1829 msgid "outer margins too large (fig.region too small)" msgstr "外版边太大(fig.region太小)" #: src/main/graphics.c:1831 msgid "figure region too large" msgstr "图区太大" #: src/main/graphics.c:1833 msgid "figure margins too large" msgstr "图版边太大" #: src/main/graphics.c:1835 msgid "plot region too large" msgstr "绘图区太大" #: src/main/graphics.c:1884 #, c-format msgid "nonfinite axis limits [GScale(%g,%g,%d, .); log=%d]" msgstr "座标范围不能无穷大[GScale(%g,%g,%d, .); log=%d]" #: src/main/graphics.c:1914 #, c-format msgid "axis style \"%c\" unimplemented" msgstr "座标形式\"%c\"目前没有实现" #: src/main/graphics.c:1977 #, c-format msgid "relative range of values =%4.0f * EPS, is small (axis %d)" msgstr "相对范围值=%4.0f * EPS太小(座标%d)" #: src/main/graphics.c:2194 src/main/graphics.c:2557 msgid "No graphics device is active" msgstr "没有已积活的图形设备" #: src/main/graphics.c:2389 msgid "plot.new has not been called yet" msgstr "还没有调用plot.new " #: src/main/graphics.c:2524 msgid "no locator capability in device driver" msgstr "设备驱动程序没有定位器功能" #: src/main/graphics.c:2796 src/main/graphics.c:2832 msgid "unable to allocate memory (in GPolygon)" msgstr "无法分配内存(GPolygon)" #: src/main/graphics.c:2983 msgid "zero-length arrow is of indeterminate angle and so skipped" msgstr "零长度箭头的角度不定，因此略过不用" #: src/main/graphics.c:3064 #, c-format msgid "invalid par(\"bty\") = '%c'; no box() drawn" msgstr "par(\"bty\")=‘%c'不对; 因此没有画box()" #: src/main/graphics.c:3081 msgid "invalid argument to GBox" msgstr "GBox变元不对" #: src/main/graphics.c:3319 msgid "Metric information not available for this device" msgstr "公制信息不适用于这个设备" #: src/main/internet.c:87 msgid "internet routines cannot be accessed in module" msgstr "无法读写模块里的互联网例行程序" #: src/main/internet.c:99 src/main/internet.c:111 src/main/internet.c:123 #: src/main/internet.c:134 src/main/internet.c:145 src/main/internet.c:156 #: src/main/internet.c:165 src/main/internet.c:176 src/main/internet.c:187 msgid "internet routines cannot be loaded" msgstr "无法载入互联网例行程序" #: src/main/internet.c:197 src/main/internet.c:207 src/main/internet.c:217 #: src/main/internet.c:227 src/main/internet.c:237 src/main/internet.c:247 #: src/main/internet.c:258 msgid "socket routines cannot be loaded" msgstr "无法载入插坐例行程序" #: src/main/lapack.c:62 msgid "lapack routines cannot be accessed in module" msgstr "无法读写模块里的lapack 例行程序" #: src/main/lapack.c:79 src/main/lapack.c:91 src/main/lapack.c:103 #: src/main/lapack.c:115 src/main/lapack.c:127 src/main/lapack.c:139 #: src/main/lapack.c:151 src/main/lapack.c:163 src/main/lapack.c:175 #: src/main/lapack.c:186 src/main/lapack.c:197 src/main/lapack.c:208 #: src/main/lapack.c:221 src/main/lapack.c:233 src/main/lapack.c:245 #: src/main/lapack.c:257 src/main/lapack.c:269 src/main/lapack.c:281 #: src/main/lapack.c:293 src/main/lapack.c:305 src/main/lapack.c:317 msgid "lapack routines cannot be loaded" msgstr "无法载入lapack 例行程序s" #: src/main/logic.c:47 msgid "binary operations require two arguments" msgstr "二进列运算需要两个变元" #: src/main/logic.c:64 src/main/logic.c:126 msgid "operations are possible only for numeric or logical types" msgstr "此运算只适用于数值或逻辑种类" #: src/main/logic.c:74 msgid "binary operation on non-conformable arrays" msgstr "二进列运算不能在非整合陈列上进行" #: src/main/logic.c:100 src/main/relop.c:143 msgid "non-conformable time series" msgstr "非整合时间系列" #: src/main/logic.c:208 #, c-format msgid "'%s' operator requires 2 arguments" msgstr "'%s'运算符需要两个变元" #: src/main/logic.c:216 #, c-format msgid "invalid 'x' type in 'x %s y'" msgstr "'x %s y'里的'x'种类不对" #: src/main/logic.c:223 #, c-format msgid "invalid 'y' type in 'x %s y'" msgstr "'x %s y'里的'y'种类不对" #: src/main/logic.c:295 msgid "Unary operator `!' called with two arguments" msgstr "单进列运算`!'不能有两个变元" #: src/main/logic.c:389 #, c-format msgid "coercing argument of type '%s' to logical" msgstr "将种类为'%s'的变元强迫转化为逻辑值" #: src/main/main.c:48 msgid "dummy - do not translate" msgstr "dummy - do not translate" #: src/main/main.c:215 msgid "error: system commands are not supported in this version of R.\n" msgstr "错误: 本R版本不支持系统命令.\n" #: src/main/main.c:463 msgid "Error: segfault from C stack overflow\n" msgstr "错误：C堆叠上溢\n" #: src/main/main.c:811 msgid "unable to open the base package\n" msgstr "无法打开基本程序包\n" #: src/main/main.c:871 msgid "WARNING: UTF-8 locales are not supported in this build of R\n" msgstr "警告: 本R版本不支持UTF-8语言环境\n" #: src/main/main.c:873 msgid "WARNING: multibyte locales are not supported in this build of R\n" msgstr "警告: 本R版本不支持多字节语言环境\n" #: src/main/main.c:896 msgid "unable to restore saved data in .RData\n" msgstr "无法用.Rdata来復原保存数据\n" #: src/main/main.c:942 msgid "During startup - " msgstr "在启动过程中 - " #: src/main/main.c:1146 msgid "cannot quit from browser" msgstr "无法退出瀏覽器" #: src/main/main.c:1150 msgid "one of \"yes\", \"no\", \"ask\" or \"default\" expected." msgstr "只能用\"yes\", \"no\", \"ask\"或\"default\"中的一个." #: src/main/main.c:1155 msgid "save=\"ask\" in non-interactive use: command-line default will be used" msgstr "save=\"ask\"不能在非交互型状态时使用，改用命令行缺省值" #: src/main/main.c:1163 msgid "unrecognized value of 'save'" msgstr "没有这种'save'值" #: src/main/main.c:1166 msgid "invalid 'status', 0 assumed" msgstr "'status'不对, 假設为零" #: src/main/main.c:1171 msgid "invalid 'runLast', FALSE assumed" msgstr "'runLast'不对, 假設为FALSE" #: src/main/main.c:1202 msgid "cannot allocate space for toplevel callback element" msgstr "无法为最高层回叫元素分配空间" #: src/main/main.c:1280 msgid "negative index passed to R_removeTaskCallbackByIndex" msgstr "R_removeTaskCallbackByIndex不能用负的索引值" #: src/main/main.c:1388 #, c-format msgid "warning messages from top-level task callback '%s'\n" msgstr "最高层任务回叫'%s'时产生了警告信息\n" #: src/main/main.c:1446 msgid "top-level task callback did not return a logical value" msgstr "最高层任务回叫没有回覆逻辑值" #: src/main/mapply.c:62 msgid "argument 'MoreArgs' of 'mapply' is not a list" msgstr "'mapply'的变元'MoreArgs'不是串列" #: src/main/mapply.c:99 msgid "longer argument not a multiple of length of shorter" msgstr "长变元的长度不是短变元的长度的整倍数" #: src/main/match.c:108 msgid "invalid partial string match" msgstr "部分字符串比较不对" #: src/main/match.c:213 src/main/match.c:253 src/main/objects.c:54 #: src/main/objects.c:64 #, c-format msgid "formal argument \"%s\" matched by multiple actual arguments" msgstr "正式变元\"%s\"有多个与之相对应的实际变元" #: src/main/match.c:216 src/main/match.c:251 #, c-format msgid "argument %d matches multiple formal arguments" msgstr "变元%d有多个与之相对应的正式变元" #: src/main/match.c:257 #, c-format msgid "partial argument match of '%s' to '%s'" msgstr "'%s'部分匹配为'%s'" #: src/main/match.c:359 #, c-format msgid "unused argument(s) %s" msgstr "变元(%s) 没有用" #: src/main/memory.c:950 msgid "can only weakly reference/finalize reference objects" msgstr "只能微弱引用或定局引用对象" #: src/main/memory.c:984 msgid "finalizer must be a function or NULL" msgstr "定局器必需是函数或NULL" #: src/main/memory.c:1035 src/main/memory.c:1043 src/main/memory.c:1054 msgid "not a weak reference" msgstr "非微弱引用" #: src/main/memory.c:1165 msgid "first argument must be environment or external pointer" msgstr "第一变元必需是环境或外部指针" #: src/main/memory.c:1167 msgid "second argument must be a function" msgstr "第二变元必需是函数" #: src/main/memory.c:1171 msgid "third argument must be 'TRUE' or 'FALSE'" msgstr "第三个的值要么是TRUE要么是FALSE" #: src/main/memory.c:1536 msgid "vector memory exhausted (limit reached?)" msgstr "矢量内存用完了(达到了极限?)" #: src/main/memory.c:1542 msgid "cons memory exhausted (limit reached?)" msgstr "cons内存用完了(达到了极限?)" #: src/main/memory.c:1547 #, fuzzy msgid "memory exhausted (limit reached?)" msgstr "cons内存用完了(达到了极限?)" #: src/main/memory.c:1668 src/main/memory.c:1674 #, c-format msgid "cannot allocate memory block of size %0.1f Gb" msgstr "无法分配大小为%0.1f Gb的内存块" #: src/main/memory.c:1891 msgid "negative length vectors are not allowed" msgstr "不能有负长度矢量" #: src/main/memory.c:1913 src/main/memory.c:1924 src/main/memory.c:1935 #: src/main/memory.c:1948 #, c-format msgid "cannot allocate vector of length %d" msgstr "无法分配长度为%d的矢量" #: src/main/memory.c:1961 #, c-format msgid "invalid type/length (%s/%d) in vector allocation" msgstr "矢量分配的种类/长度(%s/%d)不对" #: src/main/memory.c:2029 #, c-format msgid "cannot allocate vector of size %0.1f Gb" msgstr "无法分配大小为%0.1f Gb的矢量" #: src/main/memory.c:2033 #, c-format msgid "cannot allocate vector of size %0.1f Mb" msgstr "无法分配大小为%0.1f Mb的矢量" #: src/main/memory.c:2037 #, c-format msgid "cannot allocate vector of size %0.f Kb" msgstr "无法分配大小为%0.f Kb的矢量" #: src/main/memory.c:2160 msgid "gc.time() is not implemented on this system" msgstr "本系统没有实现gc.time()" #: src/main/memory.c:2328 msgid "protect(): protection stack overflow" msgstr "protect()：防护堆叠上溢" #: src/main/memory.c:2344 #, c-format msgid "unprotect(): only %d protected items" msgstr "unprotect():只有%d个保护项" #: src/main/memory.c:2358 msgid "unprotect_ptr: pointer not found" msgstr "unprotect_ptr: 找不到指针" #: src/main/memory.c:2399 #, c-format msgid "Calloc could not allocate (%d of %d) memory" msgstr "调用oc时无法分配(%d的%d)内存" #: src/main/memory.c:2409 #, c-format msgid "Realloc could not re-allocate (size %d) memory" msgstr "Realloc 无法重新分配(大小为%d)的内存" #: src/main/memory.c:2627 msgid "not safe to return vector pointer" msgstr "回覆矢量指针不是安全的做法" #: src/main/memory.c:2674 src/main/memory.c:2683 src/main/memory.c:2694 #: src/main/memory.c:2707 src/main/memory.c:2723 src/main/memory.c:2740 msgid "bad value" msgstr "值不对" #: src/main/memory.c:2861 msgid "memory profiling is not available on this system" msgstr "本系统没有记忆概要分析这个功能" #: src/main/memory.c:2926 #, c-format msgid "Rprofmem: cannot open output file '%s'" msgstr "Rprofmem: 无法输出文件'%s'" #: src/main/model.c:141 msgid "invalid term in model formula" msgstr "模型公式里有错误的项" #: src/main/model.c:216 msgid "invalid model formula" msgstr "模型公式不对" #: src/main/model.c:242 src/main/model.c:486 msgid "invalid power in formula" msgstr "公式里的幂不对" #: src/main/model.c:278 msgid "invalid model formula in ExtractVars" msgstr "ExtractVars里的模型公式不对" #: src/main/model.c:608 #, c-format msgid "duplicated name '%s' in data frame using '.'" msgstr "在数据框里用'.'时不能有重复的名字’%s'" #: src/main/model.c:665 msgid "invalid model formula in EncodeVars" msgstr "EncodeVars中的模型公式不对" #: src/main/model.c:757 msgid "argument is not a valid model" msgstr "变元不是正确的模型" #: src/main/model.c:778 msgid "'data' argument is of the wrong type" msgstr "'data'变元种类有错" #: src/main/model.c:1043 msgid "'.' in formula and no 'data' argument" msgstr "公式里有'.'，而没有'data'这一变元" #: src/main/model.c:1191 msgid "invalid formula in 'update'" msgstr "'update'里的公式不对" #: src/main/model.c:1229 msgid "formula expected" msgstr "需要公式" #: src/main/model.c:1320 msgid "invalid variables" msgstr "变数不对" #: src/main/model.c:1324 src/main/model.c:1329 msgid "number of variables != number of variable names" msgstr "变数数目不等于变数名字数目" #: src/main/model.c:1327 msgid "invalid extra variables" msgstr "額外变数不对" #: src/main/model.c:1331 msgid "invalid extra variable names" msgstr "额外变数名字不对" #: src/main/model.c:1352 #, c-format msgid "overlong names in '%s'" msgstr "'%s'里的名字太长" #: src/main/model.c:1379 #, c-format msgid "invalid type (%s) for variable '%s'" msgstr "变元'%2$s'的种类(%1$s)不对" #: src/main/model.c:1384 #, c-format msgid "variable lengths differ (found for '%s')" msgstr "变数的长度不一样('%s')" #: src/main/model.c:1438 msgid "invalid result from na.action" msgstr "na.action的结果有错" #: src/main/model.c:1631 msgid "invalid model frame" msgstr "模型框不对" #: src/main/model.c:1633 msgid "do not know how many cases" msgstr "案例数目不清" #: src/main/model.c:1656 #, c-format msgid "variable lengths differ (found for variable %d)" msgstr "变数的长度不一样(变数%d)" #: src/main/model.c:1660 src/main/model.c:1667 #, c-format msgid "variable %d has no levels" msgstr "变数%d没有因子层" #: src/main/model.c:1779 msgid "the response appeared on the right-hand side and was dropped" msgstr "在公式右手的反应略过不用" #: src/main/model.c:1811 #, c-format msgid "problem with term %d in model.matrix: no columns are assigned" msgstr "模型矩阵的%d项有问题: 没有指定的列" #: src/main/model.c:1860 src/main/model.c:1865 src/main/model.c:1871 #: src/main/model.c:1882 src/main/model.c:1888 src/main/model.c:1894 msgid "term names will be truncated" msgstr "项名字太长，被缩短了" #: src/main/model.c:1874 msgid "complex variables are not currently allowed in model matrices" msgstr "模型矩阵里目前不能有复数" #: src/main/model.c:1898 #, c-format msgid "variables of type '%s' are not allowed in model matrices" msgstr "模型矩阵里不能有种类为'%s'的变元" #: src/main/names.c:981 msgid "string argument required" msgstr "需要字符串变元" #: src/main/names.c:989 msgid "no such primitive function" msgstr "没有这种原始函数" #: src/main/names.c:1104 msgid "attempt to use zero-length variable name" msgstr "不能用零长度变数名" #: src/main/names.c:1106 #, c-format msgid "variable names are limited to %d bytes" msgstr "变量名限制于%d字节" #: src/main/names.c:1135 msgid "invalid .Internal() argument" msgstr ".Internal()变元不对" #: src/main/names.c:1138 msgid "invalid internal function" msgstr "内部函数不对" #: src/main/names.c:1140 #, c-format msgid "no internal function \"%s\"" msgstr "没有\"%s\"这个内部函数" #: src/main/objects.c:44 msgid "generic 'function' is not a function" msgstr "类属'function'不是函数" #: src/main/objects.c:194 msgid "bad generic call environment" msgstr "类属调用环境不对" #: src/main/objects.c:200 msgid "bad generic definition environment" msgstr "类属定义环境不对" #: src/main/objects.c:243 src/main/objects.c:391 msgid "'UseMethod' used in an inappropriate fashion" msgstr "'UseMethod'不能这样使用" #: src/main/objects.c:263 msgid "Invalid generic function in 'usemethod'" msgstr "'usemethod'里不能用类属功能" #: src/main/objects.c:384 msgid "corrupt internals!" msgstr "内部毁坏!" #: src/main/objects.c:396 msgid "there must be a first argument" msgstr "必需有第一变元" #: src/main/objects.c:424 msgid "arguments after the first two are ignored" msgstr "除了第一第二变元其他略过不用" #: src/main/objects.c:435 msgid "'UseMethod' called from outside a closure" msgstr "不能在封闭外调用'UseMethod'" #: src/main/objects.c:444 msgid "first argument must be a generic name" msgstr "第一变元必需是类属名" #: src/main/objects.c:454 #, c-format msgid "no applicable method for \"%s\"" msgstr "\"%s\"没有适用的方法" #: src/main/objects.c:513 msgid "'NextMethod' called from outside a function" msgstr "不能在函数外调用'NextMethod' " #: src/main/objects.c:519 msgid "'NextMethod' called from an anonymous function" msgstr "不能在匿名函数内调用'NextMethod' " #: src/main/objects.c:539 msgid "no calling generic was found: was a method called directly?" msgstr "找不到调用此方法的类属函数: 是不是已经直接调用这个方法?" #: src/main/objects.c:542 #, c-format msgid "'function' is not a function, but of type %d" msgstr "'function'不是函数, 而是种类%d" #: src/main/objects.c:616 msgid "wrong argument ..." msgstr "变元不对 ..." #: src/main/objects.c:629 msgid "object not specified" msgstr "没有设定对象" #: src/main/objects.c:639 src/main/objects.c:646 msgid "generic function not specified" msgstr "没有设定类属功能" #: src/main/objects.c:643 msgid "invalid generic argument to NextMethod" msgstr "NextMethod不能用类属变元" #: src/main/objects.c:656 msgid "invalid 'group' argument found in NextMethod" msgstr "NextMethod不能用'group'变元" #: src/main/objects.c:675 msgid "wrong value for .Method" msgstr ".Method的值不对" #: src/main/objects.c:679 src/main/objects.c:688 #, c-format msgid "method name too long in '%s'" msgstr "'%s'里的方法名字太长" #: src/main/objects.c:691 msgid "Incompatible methods ignored" msgstr "不可兼容方法，略过不用" #: src/main/objects.c:751 src/main/objects.c:756 msgid "no method to invoke" msgstr "没有可以调用的方法" #: src/main/objects.c:799 msgid "cannot unclass an environment" msgstr "无法取消环境的类别" #: src/main/objects.c:802 msgid "cannot unclass an external pointer" msgstr "无法取消外部指针的类别" #: src/main/objects.c:848 msgid "'what' must be a character vector" msgstr "'what'必需是字符矢量" #: src/main/objects.c:853 msgid "'which' must be a length 1 logical vector" msgstr "'which'必需是长度为一的逻辑矢量" #: src/main/objects.c:859 msgid "use 'is()' instead of 'inherits()' on S4 objects" msgstr "对S4目标对象请用'is()'而不是'inherits()'" #: src/main/objects.c:976 #, c-format msgid "unable to find a non-generic version of function \"%s\"" msgstr "无法找到函数\"%s\"非类属的版本" #: src/main/objects.c:1004 msgid "" "standardGeneric called without methods dispatch enabled (will be ignored)" msgstr "方法分派没有激活，因此不能调用standardGeneric(略过不用)" #: src/main/objects.c:1013 msgid "argument to standardGeneric must be a non-empty character string" msgstr "standardGeneric的变元必需是非空字符串" #: src/main/objects.c:1018 #, c-format msgid "" "call to standardGeneric(\"%s\") apparently not from the body of that generic " "function" msgstr "不能从非同屬函数体内调用standardGeneric(\"%s\") " #: src/main/objects.c:1040 msgid "argument 'code' must be a character string" msgstr "变元'code'必需是字符串" #: src/main/objects.c:1092 #, c-format msgid "" "invalid primitive methods code (\"%s\"): should be \"clear\", \"reset\", " "\"set\", or \"suppress\"" msgstr "" "原始方法代码(\"%s\")有错：应该是\"clear\", \"reset\", \"set\", 或\"suppress\"" #: src/main/objects.c:1100 msgid "invalid object: must be a primitive function" msgstr "对象不对: 必需是原始函数" #: src/main/objects.c:1147 #, c-format msgid "" "the formal definition of a primitive generic must be a function object (got " "type '%s')" msgstr "原始同属函数的正式定义必需是函数对象(不能是'%s'类)" #: src/main/objects.c:1269 msgid "invalid primitive operation given for dispatch" msgstr "不能分派原始运算" #: src/main/objects.c:1295 src/main/objects.c:1314 msgid "dispatch error" msgstr "分派错误" #: src/main/objects.c:1308 #, c-format msgid "" "primitive function \"%s\" has been set for methods but no generic function " "supplied" msgstr "原始函数\"%s\"有了设定的方法，但却没有同属函数 " #: src/main/objects.c:1333 msgid "C level MAKE_CLASS macro called with NULL string pointer" msgstr "调用C层的MAKE_TYPE宏时不能用NULL字符串指针" #: src/main/objects.c:1350 msgid "R_getClassDef(.) called with NULL string pointer" msgstr "调用R_getClassDef(.) 时不能用NULL字符串指针" #: src/main/objects.c:1373 msgid "C level NEW macro called with null class definition pointer" msgstr "调用C级的NEW宏时不能用null类别定义指针" #: src/main/objects.c:1377 #, c-format msgid "trying to generate an object from a virtual class (\"%s\")" msgstr "无法从虚拟类别(\"%s\")中产生对象" #: src/main/objects.c:1424 msgid "'R_get_primname' called on a non-primitive" msgstr "'R_get_primname'不能调用于非原始函数" #: src/main/objects.c:1454 #, c-format msgid "Object of class \"%s\" does not correspond to a valid S3 object" msgstr "" #: src/main/optim.c:73 src/main/optim.c:100 src/main/optim.c:184 msgid "non-finite value supplied by optim" msgstr "optim回覆了无限值" #: src/main/optim.c:80 #, c-format msgid "objective function in optim evaluates to length %d not 1" msgstr "optim内的目标函数长度被评估为%d，而不是一" #: src/main/optim.c:107 #, c-format msgid "gradient in optim evaluated to length %d not %d" msgstr "optim梯度长度被评估为%d，而不是%d" #: src/main/optim.c:191 #, c-format msgid "candidate point in optim evaluated to length %d not %d" msgstr "optim候选点长度被评估为%d，而不是%d" #: src/main/optim.c:221 src/main/optim.c:409 msgid "'fn' is not a function" msgstr "'fn'不是函数" #: src/main/optim.c:238 src/main/optim.c:415 msgid "'parscale' is of the wrong length" msgstr "'parscale'的长度不对" #: src/main/optim.c:252 msgid "'maxit' is not an integer" msgstr "'maxit'不是整数" #: src/main/optim.c:271 msgid "'tmax' is not an integer" msgstr "'tmax'不是整数" #: src/main/optim.c:273 src/main/optim.c:290 src/main/optim.c:315 #: src/main/optim.c:345 src/main/optim.c:423 msgid "'gr' is not a function" msgstr "'gr'不是函数" #: src/main/optim.c:296 src/main/optim.c:321 src/main/optim.c:351 #: src/main/optim.c:429 msgid "'ndeps' is of the wrong length" msgstr "'ndeps'长度不对" #: src/main/optim.c:381 msgid "unknown 'method'" msgstr "没有这样的'method'" #: src/main/optim.c:512 msgid "REPORT must be > 0 (method = \"BFGS\")" msgstr "REPORT必需大于零 (method = \"BFGS\")" #: src/main/optim.c:523 msgid "initial value in 'vmmin' is not finite" msgstr "'vmmin'的初始值不能为无穷大" #: src/main/optim.c:671 msgid "function cannot be evaluated at initial parameters" msgstr "无法用初始参数来评估函数" #: src/main/optim.c:865 msgid "unknown 'type' in CG method of optim" msgstr "optim的CG方法中没有这种'type'" #: src/main/optim.c:878 msgid "Function cannot be evaluated at initial parameters" msgstr "无法用初始参数来评估函数" #: src/main/optim.c:933 msgid "unknown type in CG method of optim" msgstr "optim的CG方法中没有这一种类" #: src/main/optim.c:1026 msgid "REPORT must be > 0 (method = \"L-BFGS-B\")" msgstr "REPORT必需大于零 (method = \"L-BFGS-B\")" #: src/main/optim.c:1050 msgid "L-BFGS-B needs finite values of 'fn'" msgstr "L-BFGS-B不能有'fn'的无限值" #: src/main/optim.c:1105 msgid "trace, REPORT must be >= 0 (method = \"SANN\")" msgstr "迹,REPORT必需大于零 (method = \"SANN\")" #: src/main/optimize.c:53 src/main/optimize.c:137 src/main/optimize.c:386 msgid "NA replaced by maximum positive value" msgstr "NA被换成最大的正值" #: src/main/optimize.c:61 src/main/optimize.c:145 src/main/optimize.c:394 msgid "NA/Inf replaced by maximum positive value" msgstr "NA/Inf被换成最大的正值" #: src/main/optimize.c:70 msgid "invalid function value in 'optimize'" msgstr "'optimize'里的函数值不对" #: src/main/optimize.c:88 src/main/optimize.c:174 src/main/optimize.c:586 msgid "attempt to minimize non-function" msgstr "不能将非函数最小化" #: src/main/optimize.c:104 src/main/optimize.c:188 msgid "'xmin' not less than 'xmax'" msgstr "'xmin'不能小于xmax" #: src/main/optimize.c:154 msgid "invalid function value in 'zeroin'" msgstr "'zeroin'函数值不对" #: src/main/optimize.c:201 msgid "'maxiter' must be positive" msgstr "'maxiter'必需是正数" #: src/main/optimize.c:229 src/main/optimize.c:235 #, c-format msgid "NA value for '%s' is not allowed" msgstr "'%s'里不可有NA值" #: src/main/optimize.c:378 msgid "non-finite value supplied by 'nlm'" msgstr "'nlm'回复了无限值" #: src/main/optimize.c:412 msgid "invalid function value in 'nlm' optimizer" msgstr "'nlm'最佳化器里的函数值不对" #: src/main/optimize.c:423 src/main/optimize.c:438 msgid "function value caching for optimization is seriously confused" msgstr "最佳化时函数值暫存器出了问题" #: src/main/optimize.c:453 msgid "numeric parameter expected" msgstr "需要数值参数" #: src/main/optimize.c:457 msgid "conflicting parameter lengths" msgstr "参数的长度自相矛盾" #: src/main/optimize.c:461 msgid "invalid parameter length" msgstr "参数长度不对" #: src/main/optimize.c:471 src/main/optimize.c:478 msgid "missing value in parameter" msgstr "参数里不能有遗漏值" #: src/main/optimize.c:483 msgid "invalid parameter type" msgstr "参数种类不对" #: src/main/optimize.c:491 msgid "invalid NA value in parameter" msgstr "参数里的NA值不对" #: src/main/optimize.c:501 msgid "non-positive number of parameters in nlm" msgstr "nlm参数不能是负的" #: src/main/optimize.c:503 msgid "nlm is inefficient for 1-d problems" msgstr "用nlm来解决一维问题效率不高" #: src/main/optimize.c:505 msgid "invalid gradient tolerance in nlm" msgstr "nlm里的梯度容错不对" #: src/main/optimize.c:507 msgid "invalid iteration limit in nlm" msgstr "nlm里的迭代极限不对" #: src/main/optimize.c:509 msgid "minimization function has no good digits in nlm" msgstr "nlm最小化函数找不到可适用的数字" #: src/main/optimize.c:511 msgid "no analytic gradient to check in nlm!" msgstr "nlm里没有可查的分析梯度!" #: src/main/optimize.c:513 msgid "no analytic Hessian to check in nlm!" msgstr "nlm里没有可查的分析海森!" #: src/main/optimize.c:515 msgid "probable coding error in analytic gradient" msgstr "分析梯度的代码很有可能出错" #: src/main/optimize.c:517 msgid "probable coding error in analytic Hessian" msgstr "分析海森的代码很有可能出错" #: src/main/optimize.c:519 #, c-format msgid "" "*** unknown error message (msg = %d) in nlm()\n" "*** should not happen!" msgstr "*** nlm()产生了不知是什么的错误信息(msg = %d) 。这不应该发生!" #: src/main/optimize.c:530 msgid "Relative gradient close to zero.\n" msgstr "相对梯度离零太近.\n" #: src/main/optimize.c:531 src/main/optimize.c:535 msgid "Current iterate is probably solution.\n" msgstr "当前的重复值很可能就已经是答案了.\n" #: src/main/optimize.c:534 msgid "Successive iterates within tolerance.\n" msgstr "在容错范围内连续迭代.\n" #: src/main/optimize.c:538 msgid "Last global step failed to locate a point lower than x.\n" msgstr "最后一步的整体优化没有能找到比x值要小的一个点.\n" #: src/main/optimize.c:539 msgid "" "Either x is an approximate local minimum of the function,\n" "the function is too non-linear for this algorithm,\n" "or steptol is too large.\n" msgstr "" "要么x已经是函数的本地最小值，要么这个函数非线性太强，要么steptol设得太大。\n" #: src/main/optimize.c:544 msgid "Iteration limit exceeded. Algorithm failed.\n" msgstr "超过了迭代极限。算法失败.\n" #: src/main/optimize.c:547 msgid "" "Maximum step size exceeded 5 consecutive times.\n" "Either the function is unbounded below,\n" "becomes asymptotic to a finite value\n" "from above in some direction,\n" "or stepmx is too small.\n" msgstr "" "最大步骤超过了5次。\n" "这个函数要么没有下边界,\n" "从上边界达到了渐近有限值\n" "要么是stepmx设得太小。\n" #: src/main/optimize.c:666 msgid "hessian supplied is of the wrong length or mode, so ignored" msgstr "海森的长度不对或其状态不对，因此略过不用" #: src/main/optimize.c:670 msgid "gradient supplied is of the wrong length or mode, so ignored" msgstr "梯度的长度或其状态不对，因此略过不用" #: src/main/options.c:109 src/main/options.c:157 msgid "corrupted options list" msgstr "选择项名单败坏" #: src/main/options.c:119 msgid "invalid printing width, used 80" msgstr "印刷宽度不对，用80" #: src/main/options.c:130 msgid "invalid printing digits, used 7" msgstr "印刷数字无效，用7" #: src/main/options.c:142 msgid "invalid value for \"device.ask.default\", using FALSE" msgstr "\"device.ask.default\"的值无效，用FALSE" #: src/main/options.c:355 msgid "list argument has no valid names" msgstr "串列变元的名字不对" #: src/main/options.c:383 #, c-format msgid "invalid 'width' parameter, allowed %d...%d" msgstr "'width'参数不对，可用%d...%d" #: src/main/options.c:390 #, c-format msgid "invalid 'digits' parameter, allowed %d...%d" msgstr "'digits'参数不对，可用%d...%d" #: src/main/options.c:397 #, c-format msgid "'expressions' parameter invalid, allowed %d...%d" msgstr "'expressions'参数不对，，可用%d...%d" #: src/main/options.c:404 src/main/options.c:412 src/main/options.c:418 #: src/main/options.c:426 src/main/options.c:433 src/main/options.c:438 #: src/main/options.c:445 src/main/options.c:451 src/main/options.c:457 #: src/main/options.c:464 src/main/options.c:470 src/main/options.c:476 #: src/main/options.c:487 src/main/options.c:494 src/main/options.c:500 #: src/main/options.c:507 src/main/options.c:515 src/main/options.c:522 #: src/main/options.c:529 src/main/options.c:536 src/main/options.c:543 #: src/main/options.c:551 #, c-format msgid "invalid value for '%s'" msgstr "'%s'的值不对" #: src/main/options.c:556 src/main/options.c:569 msgid "\"par.ask.default\" has been replaced by \"device.ask.default\"" msgstr "\"device.ask.default\"代替了\"par.ask.default\" " #: src/main/par.c:156 #, c-format msgid "invalid value specified for graphical parameter \"%s\"" msgstr "图形参数\"%s\"的值设得不对" #: src/main/par.c:163 #, c-format msgid "graphical parameter \"%s\" has the wrong length" msgstr "图形参数\"%s\"的长度不对" #: src/main/par.c:257 src/main/par.c:687 #, c-format msgid "graphical parameter \"%s\" cannot be set" msgstr "无法设定图形参数\"%s\"" #: src/main/par.c:325 src/main/par.c:715 msgid "graphical parameter 'family' has a maximum length of 200 bytes" msgstr "图形参数'family'最多只能有20字节" #: src/main/par.c:454 msgid "parameter \"mfg\" has the wrong length" msgstr "参数\"mfg\"的长度不对" #: src/main/par.c:462 msgid "parameter \"i\" in \"mfg\" is out of range" msgstr "\"mfg\"里的参数\"i\"超出了合适的范围" #: src/main/par.c:464 msgid "parameter \"j\" in \"mfg\" is out of range" msgstr "\"mfg\"里的参数\"j\"超出了合适的范围" #: src/main/par.c:469 msgid "value of nr in \"mfg\" is wrong and will be ignored" msgstr "\"mfg\"里的nr值不对，略过不用" #: src/main/par.c:471 msgid "value of nc in \"mfg\" is wrong and will be ignored" msgstr "\"mfg\"里的nc值不对，略过不用" #: src/main/par.c:497 msgid "calling par(new=TRUE) with no plot" msgstr "不绘图就不能调用par(new=TRUE)" #: src/main/par.c:679 src/main/par.c:1092 #, c-format msgid "graphical parameter \"%s\" is obsolete" msgstr "图形参数\"%s\"已过期不用了" #: src/main/par.c:683 src/main/par.c:1096 #, c-format msgid "\"%s\" is not a graphical parameter" msgstr "\"%s\"不是图形参数" #: src/main/par.c:1150 msgid "invalid argument passed to par()" msgstr "传给par()的参数错误" #: src/main/par.c:1206 #, c-format msgid "too many rows in layout, limit %d" msgstr "layout里的行数太多, 极限为%d" #: src/main/par.c:1212 #, c-format msgid "too many columns in layout, limit %d" msgstr "layout里的列数太多, 极限为%d" #: src/main/par.c:1214 #, c-format msgid "too many cells in layout, limit %d" msgstr "layout里的元素太多, 极限为%d" #: src/main/paste.c:73 src/main/paste.c:261 msgid "invalid separator" msgstr "分隔符不对" #: src/main/paste.c:107 src/main/paste.c:282 msgid "non-string argument to Internal paste" msgstr "内部貼補的变元不是字符串" #: src/main/paste.c:339 msgid "first argument must be atomic" msgstr "第一个变元必需是基元" #: src/main/paste.c:494 msgid "Impossible mode ( x )" msgstr "不可能出现这种状态(x)" #: src/main/paste.c:579 msgid "atomic vector arguments only" msgstr "只能用原子矢量变元" #: src/main/platform.c:288 msgid "invalid filename specification" msgstr "文件名字设定不对" #: src/main/platform.c:429 src/main/platform.c:476 msgid "write error during file append" msgstr "文件追加时书写出错" #: src/main/platform.c:443 src/main/platform.c:532 src/main/platform.c:570 msgid "invalid first filename" msgstr "第一个文件名字不对" #: src/main/platform.c:445 src/main/platform.c:572 msgid "invalid second filename" msgstr "第二个文件名字不对" #: src/main/platform.c:447 msgid "nothing to append to" msgstr "没有可以追加的文件" #: src/main/platform.c:449 msgid "'outFile' must be a single file" msgstr "'outfile'必需是单文件" #: src/main/platform.c:505 src/main/platform.c:708 msgid "invalid filename argument" msgstr "filename变元不对" #: src/main/platform.c:517 #, c-format msgid "cannot create file '%s', reason '%s'" msgstr "由于'%2$s'的原因，无法建立'%1$s'文件" #: src/main/platform.c:544 #, c-format msgid "cannot remove file '%s', reason '%s'" msgstr "无法删除文件'%s'，原因是'%s'" #: src/main/platform.c:574 msgid "nothing to link" msgstr "没有可以链结的文件" #: src/main/platform.c:600 #, c-format msgid "cannot symlink '%s' to '%s', reason '%s'" msgstr "无法打开'%s'到'%s'的链结，原因是'%s'" #: src/main/platform.c:608 msgid "symlinks are not supported on this platform" msgstr "这个平台不支持符号链结" #: src/main/platform.c:631 msgid "'source' must be a single string" msgstr "'source'必需是单字符串" #: src/main/platform.c:633 msgid "'destination' must be a single string" msgstr "'destination'必需是单个字符串" #: src/main/platform.c:637 msgid "missing values are not allowed" msgstr "不能有缺少值" #: src/main/platform.c:641 src/main/platform.c:651 msgid "expanded source name too long" msgstr "扩展后的源名太长" #: src/main/platform.c:645 src/main/platform.c:655 msgid "expanded destination name too long" msgstr "扩展后目的名太长" #: src/main/platform.c:659 #, c-format msgid "cannot rename file '%s' to '%s', reason '%s'" msgstr "由于'%3$s'的原因，无法将文件名字'%1$s'改成'%2$s'" #: src/main/platform.c:880 msgid "directory/folder path name too long" msgstr "目录/文件夹路径太长" #: src/main/platform.c:882 #, c-format msgid "list.files: '%s' is not a readable directory" msgstr "list.files: '%s'目录不可读" #: src/main/platform.c:1010 msgid "invalid 'pattern' regular expression" msgstr "'pattern'正规表现不对" #: src/main/platform.c:1037 msgid "unable to determine R home location" msgstr "无法确定R本录位置" #: src/main/platform.c:1176 msgid "file name too long" msgstr "文件名太长" #: src/main/platform.c:1224 msgid "file.access() is not implemented on this system" msgstr "本系统没有实现file.access()" #: src/main/platform.c:1567 msgid "setting 'LC_NUMERIC' may cause R to function strangely" msgstr "设定'LC_NUMERIC'后有可能会使R运转出现问题" #: src/main/platform.c:1601 #, c-format msgid "OS reports request to set locale to \"%s\" cannot be honored" msgstr "操作系统报告说无法执行将本地化设成\"%s\"的请求" #: src/main/platform.c:1902 msgid "'hostname' must be a character vector of length 1" msgstr "'hostname'必需是长度为一的字符矢量" #: src/main/platform.c:1908 #, c-format msgid "nsl() was unable to resolve host '%s'" msgstr "nsl()无法分辨主机'%s'" #: src/main/platform.c:1915 msgid "unknown format returned by gethostbyname" msgstr "gethostbyname回覆了错误的格式" #: src/main/platform.c:1924 msgid "nsl() is not supported on this platform" msgstr "本平台不支持nsl()" #: src/main/platform.c:1970 #, c-format msgid "'%s' already exists" msgstr "'%s'已存在" #: src/main/platform.c:1973 #, c-format msgid "cannot create dir '%s', reason '%s'" msgstr "由于'%2$s'的原因，无法建立'%1$s'文件目录" #: src/main/platform.c:2016 #, fuzzy, c-format msgid "'%ls' already exists" msgstr "'%s'已存在" #: src/main/platform.c:2289 msgid "insufficient OS support on this platform" msgstr "本平台操作系统支持不够" #: src/main/plot.c:109 msgid "only NA allowed in logical plotting symbol" msgstr "逻辑绘图符号里只允许用NA" #: src/main/plot.c:111 msgid "invalid plotting symbol" msgstr "绘图符号不对" #: src/main/plot.c:202 src/modules/X11/devX11.c:1540 msgid "invalid font specification" msgstr "字形设定不对" #: src/main/plot.c:279 msgid "invalid 'vfont' value [typeface]" msgstr "'vfont'值不对[typeface]" #: src/main/plot.c:303 #, c-format msgid "invalid 'vfont' value [typeface = %d, fontindex = %d]" msgstr "'vfont'值不对[typeface = %d, fontindex = %d]" #: src/main/plot.c:377 msgid "invalid graphics parameter" msgstr "图形参数不对" #: src/main/plot.c:466 msgid "at least 3 arguments required" msgstr "至少需要三个变元" #: src/main/plot.c:481 msgid "\"log=\" specification must be character" msgstr "\"log=\"必需设定成字符" #: src/main/plot.c:492 #, c-format msgid "invalid \"log=%s\" specification" msgstr "\"log=%s\"设定不对" #: src/main/plot.c:507 msgid "NAs not allowed in 'xlim'" msgstr "'xlim'里不允许NA" #: src/main/plot.c:513 msgid "need finite 'xlim' values" msgstr "'xlim'值不能是无限的" #: src/main/plot.c:519 msgid "NAs not allowed in 'ylim'" msgstr "'ylim'里不允许NA" #: src/main/plot.c:525 msgid "need finite 'ylim' values" msgstr "'ylim'值不能是无限的" #: src/main/plot.c:531 msgid "Logarithmic axis must have positive limits" msgstr "对数座标不能有负的极限" #: src/main/plot.c:648 msgid "invalid type for axis labels" msgstr "座标標記种类不对" #: src/main/plot.c:917 #, c-format msgid "invalid axis number %d" msgstr "座标数目%d不对" #: src/main/plot.c:1007 msgid "'hadj' must be of length one" msgstr "'hadj'的长度必需为一" #: src/main/plot.c:1014 src/main/plot.c:2425 msgid "zero length 'padj' specified" msgstr "'padj'长度不能为零" #: src/main/plot.c:1083 msgid "'labels' is supplied and not 'at'" msgstr "'label'的值虽然是有了，但'at'的值却不存在" #: src/main/plot.c:1087 #, c-format msgid "'at' and 'labels' lengths differ, %d != %d" msgstr "'at'和'label'的长度不同，%d != %d" #: src/main/plot.c:1104 msgid "no locations are finite" msgstr "所有的位置值都是无限的" #: src/main/plot.c:1461 msgid "invalid plotting structure" msgstr "绘图结构不对" #: src/main/plot.c:1463 #, c-format msgid "'x' and 'y' lengths differ in %s()" msgstr "%s()里的'x'和'y'的长度不一样" #: src/main/plot.c:1474 #, c-format msgid "plot type '%s' will be truncated to first character" msgstr "绘图种类'%s'被缩短成第一个字符" #: src/main/plot.c:1478 src/main/plot.c:3031 msgid "invalid plot type" msgstr "绘图种类不对" #: src/main/plot.c:1678 #, c-format msgid "invalid plot type '%c'" msgstr "绘图种类'%c'不对" #: src/main/plot.c:1738 msgid "invalid third argument" msgstr "第三个变元不对" #: src/main/plot.c:1746 msgid "invalid fourth argument" msgstr "第四个变元不对" #: src/main/plot.c:1754 msgid "cannot mix zero-length and non-zero-length coordinates" msgstr "不能将零长度的座标同其它长度的座标混合在一起" #: src/main/plot.c:1928 msgid "invalid arrow head length" msgstr "箭头长度不对" #: src/main/plot.c:1933 msgid "invalid arrow head angle" msgstr "箭头角度不对" #: src/main/plot.c:1938 msgid "invalid arrow head specification" msgstr "箭头设定不对" #: src/main/plot.c:2103 src/main/plot.c:3173 msgid "zero length 'labels'" msgstr "'labels'的长度不能为零" #: src/main/plot.c:2177 msgid "no coordinates were supplied" msgstr "没有座标" #: src/main/plot.c:2383 msgid "zero length 'text' specified" msgstr "'text'长度不能设成零" #: src/main/plot.c:2389 msgid "zero length 'side' specified" msgstr "'side'长度不能设成零" #: src/main/plot.c:2396 msgid "zero length 'line' specified" msgstr "'line'长度不能设成零" #: src/main/plot.c:2404 msgid "zero length 'outer' specified" msgstr "'outer'长度不能设成零" #: src/main/plot.c:2411 msgid "zero length 'at' specified" msgstr "'at'长度不能设成零" #: src/main/plot.c:2418 msgid "zero length 'adj' specified" msgstr "'adj'长度不能设成零" #: src/main/plot.c:2432 msgid "zero length 'cex' specified" msgstr "'cex'长度不能设成零" #: src/main/plot.c:2440 msgid "zero length 'col' specified" msgstr "'col'长度不能设成零" #: src/main/plot.c:2447 msgid "zero length 'font' specified" msgstr "'font'长度不能设成零" #: src/main/plot.c:2810 msgid "invalid a=, b= specification" msgstr "a=, b= 设定不对" #: src/main/plot.c:2819 msgid "'a' and 'b' must be finite" msgstr "'a'和'b'的值必需是有限的" #: src/main/plot.c:3026 msgid "invalid number of points in locator()" msgstr "locator()里点的数目不对" #: src/main/plot.c:3162 msgid "invalid number of points in identify()" msgstr "identify()里点的数目不对" #: src/main/plot.c:3164 msgid "incorrect argument type" msgstr "变元种类不对" #: src/main/plot.c:3176 msgid "different argument lengths" msgstr "变元长度不一样" #: src/main/plot.c:3178 msgid "more 'labels' than points" msgstr "'labels'比点还要多" #: src/main/plot.c:3231 #, c-format msgid "warning: no point within %.2f inches\n" msgstr "警告: 没有点在%.2f英尺内\n" #: src/main/plot.c:3237 msgid "warning: nearest point already identified\n" msgstr "警告: 已经找到了最近的点\n" #: src/main/plot.c:3321 msgid "invalid units" msgstr "单位不对" #: src/main/plot.c:3500 src/main/plot.c:3610 msgid "invalid dendrogram input" msgstr "谱系图输入不对" #: src/main/plot.c:3669 msgid "invalid symbol parameter vector" msgstr "符号参数矢量不对" #: src/main/plot.c:3692 msgid "invalid symbol coordinates" msgstr "符号座标不对" #: src/main/plot.c:3700 msgid "x/y/parameter length mismatch" msgstr "x/y/参数长度不一样" #: src/main/plot.c:3719 msgid "invalid circles data" msgstr "圆圈数据不对" #: src/main/plot.c:3721 src/main/plot.c:3740 src/main/plot.c:3764 #: src/main/plot.c:3793 msgid "invalid symbol parameter" msgstr "符号参数不对" #: src/main/plot.c:3738 msgid "invalid squares data" msgstr "正方形数据不对" #: src/main/plot.c:3762 msgid "invalid rectangles data (need 2 columns)" msgstr "长方形数据不对(需要两个列)" #: src/main/plot.c:3791 msgid "invalid stars data" msgstr "星形数据不对" #: src/main/plot.c:3832 msgid "invalid thermometers data (need 3 or 4 columns)" msgstr "温度计数据不对(需要三或四个列)" #: src/main/plot.c:3835 #, c-format msgid "invalid thermometers[,%s]" msgstr "温度计[,%s]不对" #: src/main/plot.c:3838 #, c-format msgid "thermometers[,%s] not in [0,1] -- may look funny" msgstr "温度计[,%s]在[0,1]范围外--看起来会有点不对" #: src/main/plot.c:3841 msgid "invalid thermometers[,1:2]" msgstr "温度计[,1:2]" #: src/main/plot.c:3880 msgid "invalid boxplots data (need 5 columns)" msgstr "盒形图数据不对(需要五个列)" #: src/main/plot.c:3889 msgid "boxplots[,5] outside [0,1] -- may look funny" msgstr "盒形图[,5]在[0,1]范围外--看起来会有点不对" #: src/main/plot.c:3891 msgid "invalid boxplots[, 1:4]" msgstr "盒形图[, 1:4]不对" #: src/main/plot.c:3937 msgid "invalid symbol type" msgstr "符号种类不对" #: src/main/plot.c:3977 src/main/plot.c:3979 src/main/plot.c:3984 #: src/main/plot.c:3986 #, c-format msgid "incorrect length for '%s' argument" msgstr "'%s'变元的长度不对" #: src/main/plot.c:4003 msgid "unable to allocate memory (in do_xspline)" msgstr "无法分配内存(do_xspline)" #: src/main/plot3d.c:719 src/main/plot3d.c:1011 msgid "contour(): circular/long seglist -- bug.report()!" msgstr "contour():圆的/长的seglist -- bug.report()!" #: src/main/plot3d.c:802 src/main/plot3d.c:1459 msgid "all z values are equal" msgstr "所有的z值是一样的" #: src/main/plot3d.c:804 src/main/plot3d.c:1461 msgid "all z values are NA" msgstr "所有的z值都是NA" #: src/main/plot3d.c:1423 src/main/plot3d.c:1679 msgid "insufficient 'x' or 'y' values" msgstr "'x'或'y'值的大小不够" #: src/main/plot3d.c:1426 src/main/plot3d.c:1682 msgid "dimension mismatch" msgstr "量度不相符" #: src/main/plot3d.c:1429 src/main/plot3d.c:1685 msgid "no contour values" msgstr "无等高值" #: src/main/plot3d.c:1433 msgid "missing 'x' values" msgstr "缺少'x'值" #: src/main/plot3d.c:1435 msgid "increasing 'x' values expected" msgstr "'x'值应加大" #: src/main/plot3d.c:1440 msgid "missing 'y' values" msgstr "缺少'y'值" #: src/main/plot3d.c:1442 msgid "increasing 'y' values expected" msgstr "'y'值应加大" #: src/main/plot3d.c:1447 msgid "invalid NA contour values" msgstr "NA等高值不对" #: src/main/plot3d.c:1749 msgid "invalid x / y values or limits" msgstr "x/y的值或极限不对" #: src/main/plot3d.c:1751 msgid "invalid contour levels: must be strictly increasing" msgstr "等高层次不对: 必需严格增加" #: src/main/plot3d.c:2411 src/main/plot3d.c:2424 msgid "Axis orientation not calculated" msgstr "无法计算座标方位" #: src/main/plot3d.c:2442 msgid "too few parameters" msgstr "参数太少" #: src/main/plot3d.c:2474 msgid "invalid 'x' limits" msgstr "'x'极限不对" #: src/main/plot3d.c:2476 msgid "invalid 'y' limits" msgstr "'y'极限不对" #: src/main/plot3d.c:2478 msgid "invalid 'z' limits" msgstr "'z'极限不对" #: src/main/plot3d.c:2499 msgid "'xlab' must be a character vector of length 1" msgstr "'xlab'必需是长度为一的字符矢量" #: src/main/plot3d.c:2501 msgid "'ylab' must be a character vector of length 1" msgstr "'ylab'必需是长度为一的字符矢量" #: src/main/plot3d.c:2503 msgid "'zlab' must be a character vector of length 1" msgstr "'zlab'必需是长度为一的字符矢量" #: src/main/plot3d.c:2523 msgid "invalid viewing parameters" msgstr "视见参数不对" #: src/main/plotmath.c:310 msgid "invalid `which' in TeX" msgstr "TeX里'which'设定不对" #: src/main/plotmath.c:337 msgid "invalid math style encountered" msgstr "数学字体不对" #: src/main/plotmath.c:1272 src/main/plotmath.c:1377 src/main/plotmath.c:2676 msgid "invalid mathematical annotation" msgstr "数学注释不对" #: src/main/plotmath.c:1682 msgid "invalid accent" msgstr "重音不对" #: src/main/plotmath.c:1976 msgid "invalid group delimiter" msgstr "组定界不对" #: src/main/plotmath.c:2003 src/main/plotmath.c:2149 msgid "invalid group specification" msgstr "组设定不对" #: src/main/plotmath.c:2074 msgid "group is incomplete" msgstr "组不全" #: src/main/plotmath.c:3163 msgid "Metric information not available for this family/device" msgstr "公制信息不适用此系列/设备" #: src/main/print.c:138 src/main/print.c:187 msgid "invalid 'na.print' specification" msgstr "'na.print'设定不对" #: src/main/print.c:147 msgid "invalid row labels" msgstr "行標記不对" #: src/main/print.c:149 msgid "invalid column labels" msgstr "列標記不对" #: src/main/print.c:197 msgid "'gap' must be non-negative integer" msgstr "'gap'必需是正整数" #: src/main/print.c:221 msgid "invalid 'tryS4' internal argument" msgstr "'tryS4'内部变元不对" #: src/main/print.c:947 msgid "invalid character length in dblepr" msgstr "dblepr字符长度不对" #: src/main/print.c:965 msgid "invalid character length in intpr" msgstr "intpr字符长度不对" #: src/main/print.c:984 msgid "invalid character length in realpr" msgstr "realpr字符长度不对" #: src/main/print.c:994 msgid "memory allocation error in realpr" msgstr "realpr内存分配错误" #: src/main/print.c:1010 #, c-format msgid "BLAS/LAPACK routine '%6s' gave error code %d" msgstr "BLAS/LAPACK 例行程序'%6s'产生了错误%d信息" #: src/main/printarray.c:483 msgid "too few row labels" msgstr "行標記不够" #: src/main/printarray.c:485 msgid "too few column labels" msgstr "列標記不够" #: src/main/printarray.c:519 #, c-format msgid " [ reached getOption(\"max.print\") -- omitted last row ]]\n" msgid_plural " [ reached getOption(\"max.print\") -- omitted %d rows ]]\n" msgstr[0] "[到达getOption(\"max.print\") -- 略过%d行]]\n" #: src/main/qsort.c:50 msgid "argument is not a numeric vector" msgstr "变元不是数值矢量" #: src/main/random.c:83 src/main/random.c:100 src/main/random.c:157 #: src/main/random.c:183 src/main/random.c:247 src/main/random.c:261 msgid "NAs produced" msgstr "产生了NA" #: src/main/random.c:97 msgid "internal error in do_random1" msgstr "do_random1产生了内部错误" #: src/main/random.c:180 msgid "internal error in do_random2" msgstr "do_random2产生了内部错误" #: src/main/random.c:258 msgid "internal error in do_random3" msgstr "do_random3产生了内部错误" #: src/main/random.c:441 msgid "NA in probability vector" msgstr "机率矢量中有NA" #: src/main/random.c:443 msgid "non-positive probability" msgstr "不能有非负机率" #: src/main/random.c:450 msgid "too few positive probabilities" msgstr "正值机率太少" #: src/main/random.c:479 msgid "cannot take a sample larger than the population when 'replace = FALSE'" msgstr "" "'replace = FALSE'，因此不能取比总体要大的样本\n" " " #: src/main/random.c:488 msgid "incorrect number of probabilities" msgstr "机率数目不对" #: src/main/random.c:523 msgid "invalid first argument 'n'" msgstr "第一变元'n'不对" #: src/main/random.c:525 msgid "invalid second argument 'size'" msgstr "第二变元'size'不对" #: src/main/regex.c:2707 msgid "Success" msgstr "执行成功" #: src/main/regex.c:2710 msgid "No match" msgstr "没有相配的" #: src/main/regex.c:2713 msgid "Invalid regular expression" msgstr "正规表现不对" #: src/main/regex.c:2716 msgid "Invalid collation character" msgstr "理序字符不对" #: src/main/regex.c:2719 msgid "Invalid character class name" msgstr "字符类别名字不对" #: src/main/regex.c:2722 msgid "Trailing backslash" msgstr "不能有尾随/符号" #: src/main/regex.c:2725 msgid "Invalid back reference" msgstr "后引用不对" #: src/main/regex.c:2728 msgid "Unmatched [ or [^" msgstr "没有相配的[或[^" #: src/main/regex.c:2731 msgid "Unmatched ( or \\(" msgstr "没有相配的(或\\(" #: src/main/regex.c:2734 msgid "Unmatched \\{" msgstr "没有相配的\\{" #: src/main/regex.c:2737 msgid "Invalid content of \\{\\}" msgstr "\\{\\}内容不对" #: src/main/regex.c:2740 msgid "Invalid range end" msgstr "范围终端不对" #: src/main/regex.c:2743 msgid "Memory exhausted" msgstr "内存用完了" #: src/main/regex.c:2746 msgid "Invalid preceding regular expression" msgstr "前正规表现不对" #: src/main/regex.c:2749 msgid "Premature end of regular expression" msgstr "正规表现没有结尾" #: src/main/regex.c:2752 msgid "Regular expression too big" msgstr "正规表现太大" #: src/main/regex.c:2755 msgid "Unmatched ) or \\)" msgstr "没有相配的)或\\)" #: src/main/regex.c:3247 msgid "No previous regular expression" msgstr "前正规表现不存在" #: src/main/relop.c:98 #, c-format msgid "comparison (%d) is possible only for atomic and list types" msgstr "只能比较(%d)基元或串列种类" #: src/main/relop.c:103 msgid "comparison is not allowed for expressions" msgstr "不能比较表达式" #: src/main/relop.c:192 msgid "comparison of these types is not implemented" msgstr "这些种类的比较方法还没有实现" #: src/main/relop.c:393 msgid "invalid comparison with complex values" msgstr "不能比较复数值" #: src/main/saveload.c:199 src/main/saveload.c:204 src/main/saveload.c:213 #: src/main/saveload.c:222 src/main/saveload.c:231 src/main/saveload.c:240 #: src/main/saveload.c:244 src/main/saveload.c:253 src/main/saveload.c:1369 #: src/main/saveload.c:1374 src/main/saveload.c:1418 src/main/saveload.c:1486 #: src/main/saveload.c:1495 src/main/serialize.c:330 src/main/serialize.c:337 #: src/main/serialize.c:1949 src/main/serialize.c:1957 msgid "read error" msgstr "读取错误" #: src/main/saveload.c:331 msgid "a I read error occurred" msgstr "发生了I类读取错误" #: src/main/saveload.c:341 msgid "a R read error occurred" msgstr "发生了R类读取错误" #: src/main/saveload.c:351 msgid "a C read error occurred" msgstr "发生了C类读取错误" #: src/main/saveload.c:361 msgid "a S read error occurred" msgstr "发生了S类读取错误" #: src/main/saveload.c:386 src/main/saveload.c:394 src/main/saveload.c:402 #: src/main/saveload.c:1582 src/main/saveload.c:1590 msgid "a read error occurred" msgstr "发生了读取错误" #: src/main/saveload.c:466 msgid "unresolved node during restore" msgstr "復原时遇到了无法解析的节点" #: src/main/saveload.c:487 #, c-format msgid "restore compatibility error - no version %d compatibility" msgstr "復原相容错误：没有同版本%d相容的功能" #: src/main/saveload.c:571 src/main/saveload.c:639 msgid "bad SEXP type in data file" msgstr "数据文件里SEXP种类出错" #: src/main/saveload.c:585 msgid "mismatch on types" msgstr "种类不相配" #: src/main/saveload.c:702 msgid "cannot save file position while restoring data" msgstr "在复原数据时无法保存文件位置" #: src/main/saveload.c:715 msgid "cannot restore file position while restoring data" msgstr "在复原数据时无法复原文件位置" #: src/main/saveload.c:908 msgid "base namespace is not preserved in version 1 workspaces" msgstr "一号版本的工作空间不能保全基本名字空间" #: src/main/saveload.c:910 msgid "cannot save namespace in version 1 workspaces" msgstr "一号版本的工作空间无法保存名字空间" #: src/main/saveload.c:912 msgid "" "cannot save environment with locked/active bindingsin version 1 workspaces" msgstr "一号版本的工作空间不能保存锁定的或是活动的联编" #: src/main/saveload.c:936 msgid "cannot save weak references in version 1 workspaces" msgstr "一号版本的工作空间无法保存弱引用" #: src/main/saveload.c:1014 msgid "NewWriteVec called with non-vector type" msgstr "NewWriteVec不适用于非矢量种类" #: src/main/saveload.c:1077 msgid "cannot save byte code objects in version 1 workspaces" msgstr "一号版本的工作空间无法保存位元组码对象" #: src/main/saveload.c:1079 #, c-format msgid "NewWriteItem: unknown type %i" msgstr "NewWriteItem: 没有%i这一种类" #: src/main/saveload.c:1209 msgid "NewReadVec called with non-vector type" msgstr "NewReadVec不适用于非矢量种类" #: src/main/saveload.c:1274 msgid "cannot read byte code objects from version 1 workspaces" msgstr "无法从一号版本的工作空间里读取位元组码对象" #: src/main/saveload.c:1276 #, c-format msgid "NewReadItem: unknown type %i" msgstr "NewReadItem: 没有%i这一种类" #: src/main/saveload.c:1428 msgid "out of memory reading ascii string" msgstr "读取ascii字符串时内存不够" #: src/main/saveload.c:1553 msgid "a binary read error occurred" msgstr "二进列读取时发生了错误" #: src/main/saveload.c:1568 src/main/saveload.c:1669 msgid "out of memory reading binary string" msgstr "读取二进列字符串时内存不够" #: src/main/saveload.c:1573 msgid "a binary string read error occurred" msgstr "读取二进列字符串时发生了错误" #: src/main/saveload.c:1633 msgid "an xdr integer data write error occurred" msgstr "xdr整数数据书写错误" #: src/main/saveload.c:1640 msgid "an xdr integer data read error occurred" msgstr "xdr整数数据读取错误" #: src/main/saveload.c:1655 src/main/saveload.c:1674 msgid "an xdr string data write error occurred" msgstr "xdr字符串数据书写错误" #: src/main/saveload.c:1682 msgid "an xdr real data write error occurred" msgstr "xdr实数数据书写错误" #: src/main/saveload.c:1689 msgid "an xdr real data read error occurred" msgstr "xdr实数数据读取错误" #: src/main/saveload.c:1696 msgid "an xdr complex data write error occurred" msgstr "xdr复数数据书写错误" #: src/main/saveload.c:1703 msgid "an xdr complex data read error occurred" msgstr "xdr复数数据读取错误" #: src/main/saveload.c:1771 src/main/serialize.c:1605 #: src/main/serialize.c:2120 src/modules/internet/internet.c:349 #: src/modules/internet/internet.c:407 src/modules/internet/internet.c:512 msgid "write failed" msgstr "书写失败" #: src/main/saveload.c:1897 msgid "restore file may be empty -- no data loaded" msgstr "復原文件可能是空的 -- 没有载入任何数据" #: src/main/saveload.c:1899 msgid "restore file may be from a newer version of R -- no data loaded" msgstr "復原文件可能是由比目前R版本要新的R保存的 -- 没有载入任何数据" #: src/main/saveload.c:1901 msgid "bad restore file magic number (file may be corrupted) -- no data loaded" msgstr "復原文件幻数出错(文件可能有损坏)-- 没有载入任何数据" #: src/main/saveload.c:1926 src/main/saveload.c:2213 msgid "first argument must be a character vector" msgstr "第一变元必需是字符矢量" #: src/main/saveload.c:1998 msgid "not a valid named list" msgstr "带名字的串列不对" #: src/main/saveload.c:2005 src/main/saveload.c:2025 #, c-format msgid "'%s' looks like a pre-2.4.0 S4 object: please recreate it" msgstr "'%s'看起来好象是2.4.0前的S4目标对象；请重新创造" #: src/main/saveload.c:2013 msgid "loaded data is not in pair list form" msgstr "载入数据没有成双串列形式" #: src/main/saveload.c:2048 msgid "first argument must be a file name" msgstr "第一变元必需是文件名字" #: src/main/saveload.c:2064 src/unix/edit.c:122 msgid "unable to open file" msgstr "无法打开文件" #: src/main/saveload.c:2096 src/main/saveload.c:2122 msgid "XDR write failed" msgstr "XDR书写失败" #: src/main/saveload.c:2109 src/main/saveload.c:2134 msgid "XDR read failed" msgstr "XDR读取失败" #: src/main/saveload.c:2145 #, c-format msgid "cannot save data -- unable to open '%s': %s" msgstr "无法保存数据 -- 无法打开%s: %s" #: src/main/saveload.c:2229 src/main/serialize.c:1798 #, c-format msgid "cannot save to connections in version %d format" msgstr "无法用%d版本的格式来保存链结" #: src/main/saveload.c:2241 msgid "connection not open for writing" msgstr "无法打开链结进行书写" #: src/main/saveload.c:2250 msgid "cannot save XDR format to a text-mode connection" msgstr "不能将XDR格式保存到文字状态链结" #: src/main/saveload.c:2260 src/main/serialize.c:1713 #: src/main/serialize.c:1727 src/main/serialize.c:1847 #: src/main/serialize.c:1869 msgid "error writing to connection" msgstr "链结书写发生了错误" #: src/main/saveload.c:2321 msgid "connection not open for reading" msgstr "链结没有打开，不能读" #: src/main/saveload.c:2334 msgid "no input is available" msgstr "没有输入值" #: src/main/saveload.c:2354 msgid "" "the input does not start with a magic number compatible with loading from a " "connection" msgstr "在通过联结进行输入时，文件头没有魔号" #: src/main/scan.c:473 #, c-format msgid "scan() expected '%s', got '%s'" msgstr "scan()需要'%s', 而不是'%s'" #: src/main/scan.c:659 msgid "empty 'what' specified" msgstr "'what'设定不能是空的" #: src/main/scan.c:710 #, c-format msgid "line %d did not have %d elements" msgstr "%d行没有%d元素" #: src/main/scan.c:762 msgid "number of items read is not a multiple of the number of columns" msgstr "读取的项目数必需是列数的倍数" #: src/main/scan.c:854 msgid "invalid 'strip.white' length" msgstr "'strip.white'的长度不对" #: src/main/scan.c:865 msgid "invalid 'sep' value: must be one byte" msgstr "'sep'值不对: 大小只能为一拜" #: src/main/scan.c:877 msgid "invalid decimal separator: must be one byte" msgstr "十进位分隔符不对: 大小只能为一拜" #: src/main/scan.c:882 msgid "invalid decimal separator" msgstr "十进位分隔符不对" #: src/main/scan.c:891 src/main/scan.c:1014 src/main/scan.c:1506 msgid "invalid quote symbol set" msgstr "引号符号集不对" #: src/main/scan.c:1077 src/main/scan.c:1095 msgid "string terminated by newline or EOF" msgstr "字符串结尾要用新行或EOF" #: src/main/scan.c:1217 msgid "the first argument must be of mode character" msgstr "第一变元的状态必需是字符" #: src/main/scan.c:1448 #, c-format msgid "Selection: " msgstr "选择: " #: src/main/scan.c:1536 src/main/scan.c:1548 msgid "cannot allocate buffer in 'readTableHead'" msgstr "'readTableHead'无法分配缓冲区" #: src/main/scan.c:1558 msgid "\\ followed by EOF" msgstr "\\ 后面跟着EOF" #: src/main/scan.c:1603 src/main/scan.c:1606 #, c-format msgid "incomplete final line found by readTableHeader on '%s'" msgstr "readTableHeader在读取'%s'时遇到了不完全的最后一行" #: src/main/scan.c:1714 msgid "'file' is not a connection" msgstr "'file'不是链结" #: src/main/scan.c:1747 msgid "'dec' must be a single character" msgstr "'dec'必需为单节字符" #: src/main/scan.c:1774 #, c-format msgid "corrupt data frame -- length of column %d does not not match nrows" msgstr "数据框损坏了--列的长度%d不等于行的数目" #: src/main/scan.c:1820 msgid "corrupt matrix -- dims not not match length" msgstr "矩阵损坏了--dims同长度不相等" #: src/main/seq.c:42 msgid "unequal factor lengths" msgstr "因子长度不相等" #: src/main/seq.c:98 msgid "result would be too long a vector" msgstr "答案矢量会太长" #: src/main/seq.c:130 src/main/seq.c:133 #, c-format msgid "numerical expression has %d elements: only the first used" msgstr "数值表达式一共有%d元素: 只用了第一个" #: src/main/seq.c:137 msgid "NA/NaN argument" msgstr "NA/NaN变元" #: src/main/seq.c:239 msgid "incorrect type for second argument" msgstr "第二变元种类不对" #: src/main/seq.c:242 msgid "attempt to replicate non-vector" msgstr "非矢量不能被复制" #: src/main/seq.c:489 msgid "'length.out' must be a non-negative number" msgstr "'length.out'必需是正整数" #: src/main/seq.c:503 src/main/seq.c:547 src/main/seq.c:561 msgid "'from' must be finite" msgstr "'from'的值必需是有限的" #: src/main/seq.c:505 src/main/seq.c:549 src/main/seq.c:579 msgid "'to' must be finite" msgstr "'to'的值必需是有限的" #: src/main/seq.c:517 msgid "invalid '(to - from)/by' in 'seq'" msgstr "'seq'内的'(to - from)/by'值设得不对" #: src/main/seq.c:525 msgid "'by' argument is much too small" msgstr "'by'变元太小了" #: src/main/seq.c:527 msgid "wrong sign in 'by' argument" msgstr "'by'正负号不对" #: src/main/seq.c:563 src/main/seq.c:581 msgid "'by' must be finite" msgstr "'by'的值必需是有限的" #: src/main/seq.c:621 msgid "argument must be non-negative" msgstr "变元不能有负值" #: src/main/serialize.c:224 src/main/serialize.c:254 src/main/serialize.c:277 msgid "unknown or inappropriate output format" msgstr "输出格式不对" #: src/main/serialize.c:495 msgid "binary format is deprecated; using xdr instead" msgstr "二进列格式不再使用，替之用xdr格式" #: src/main/serialize.c:503 msgid "must specify ascii, binary, or xdr format" msgstr "必需设定ascii， binary， 或xdr格式中的一个" #: src/main/serialize.c:504 msgid "unknown output format" msgstr "没有这种输出格式" #: src/main/serialize.c:535 msgid "unknown input format" msgstr "没有这种输入格式" #: src/main/serialize.c:540 msgid "input format does not match specified format" msgstr "输入格式同设定的格式不相配" #: src/main/serialize.c:738 msgid "no restore method available" msgstr "没有復原的方法" #: src/main/serialize.c:769 msgid "names in persistent strings are currently ignored" msgstr "持续字符串里的名字现在不用" #: src/main/serialize.c:822 #, c-format msgid "'%s' may not be available when loading" msgstr "载入时'%s'可能无用" #: src/main/serialize.c:829 msgid "namespaces may not be available when loading" msgstr "载入时名字空间可能无用" #: src/main/serialize.c:934 msgid "this version of R cannot write byte code objects" msgstr "本R版本无法书写位元组码对象" #: src/main/serialize.c:943 #, c-format msgid "WriteItem: unknown type %i" msgstr "WriteItem不对: 没有这一种类%i" #: src/main/serialize.c:1113 #, c-format msgid "version %d not supported" msgstr "不支持版本%d" #: src/main/serialize.c:1141 msgid "reference index out of range" msgstr "引用索引在范围外" #: src/main/serialize.c:1171 msgid "names in persistent strings are not supported yet" msgstr "目前不支持持续字符串里的名字" #: src/main/serialize.c:1379 msgid "this version of R cannot read byte code objects" msgstr "本R版本无法读取位元组码对象" #: src/main/serialize.c:1382 msgid "this version of R cannot read class references" msgstr "本R版本无法读取类别引用" #: src/main/serialize.c:1384 msgid "this version of R cannot read generic function references" msgstr "本R版本无法读取类属功能引用" #: src/main/serialize.c:1395 #, c-format msgid "ReadItem: unknown type %i, perhaps written by later version of R" msgstr "ReadItem: 不存在%i 这一种类，可能是因为由新的R版本所写的" #: src/main/serialize.c:1529 #, c-format msgid "" "cannot read unreleased workspace version %d written by experimental R %d.%d.%" "d" msgstr "" "无法从由R实验版本%2$d.%3$d.%4$d写的还未被释放的工作空间版本%1$d中读取数据" #: src/main/serialize.c:1533 #, c-format msgid "" "cannot read workspace version %d written by R %d.%d.%d; need R %d.%d.%d or " "newer" msgstr "" "无法从由R版本%2$d.%3$d.%4$d写的工作空间版本%1$d中读取数据；需要R版本%5$d.%6" "$d.%7$d以后的版本" #: src/main/serialize.c:1612 msgid "read failed" msgstr "读取失败" #: src/main/serialize.c:1675 msgid "error reading from ascii connection" msgstr "读取ascii链结时发生了错误" #: src/main/serialize.c:1677 msgid "unexpected format in ascii connection" msgstr "ascii链结里出现了意外格式" #: src/main/serialize.c:1682 src/main/serialize.c:1696 msgid "error reading from connection" msgstr "读取链结时发生了错误" #: src/main/serialize.c:1737 msgid "only ascii format can be written to text mode connections" msgstr "只能用ascii格式书写文字状态的链结" #: src/main/serialize.c:1751 msgid "only ascii format can be read from text mode connections" msgstr "只能用ascii格式读取文字状态的链结" #: src/main/serialize.c:1796 msgid "bad version value" msgstr "版本值不对" #: src/main/serialize.c:1917 src/main/serialize.c:1939 #: src/main/serialize.c:2000 msgid "serialization is too large to store in a raw vector" msgstr "串行太大，无法存储于原始矢量中" #: src/main/serialize.c:1921 msgid "cannot allocate buffer" msgstr "无法分配缓冲区" #: src/main/serialize.c:2098 src/main/serialize.c:2165 msgid "not a proper file name" msgstr "文件名字有错" #: src/main/serialize.c:2100 msgid "not a proper raw vector" msgstr "不是原始矢量" #: src/main/serialize.c:2121 msgid "could not determine file position" msgstr "无法确定文件位置" #: src/main/serialize.c:2167 msgid "bad offset/length argument" msgstr "位移/长度变元不对" #: src/main/serialize.c:2192 src/main/serialize.c:2200 #: src/main/serialize.c:2211 #, c-format msgid "seek failed on %s" msgstr "读取%s失败" #: src/main/serialize.c:2204 src/main/serialize.c:2215 #, c-format msgid "read failed on %s" msgstr "读取%s失败" #: src/main/serialize.c:2236 msgid "bad environment" msgstr "环境有错" #: src/main/serialize.c:2238 msgid "bad variable names" msgstr "变数名字不对" #: src/main/sort.c:86 msgid "only atomic vectors can be tested to be sorted" msgstr "只有基元矢量才能被检验排序" #: src/main/sort.c:308 src/main/sort.c:863 src/main/sort.c:960 msgid "'decreasing' must be TRUE or FALSE" msgstr "'increasing'必需是TRUE或是FALSE" #: src/main/sort.c:311 src/main/sort.c:561 msgid "only atomic vectors can be sorted" msgstr "只有基元矢量才能被排序" #: src/main/sort.c:313 src/main/sort.c:563 src/main/sort.c:906 msgid "raw vectors cannot be sorted" msgstr "无法排序原始矢量" #: src/main/sort.c:570 msgid "NA index" msgstr "NA索引" #: src/main/sort.c:572 #, c-format msgid "index %d outside bounds" msgstr "索引%d在界限外" #: src/main/sort.c:872 #, c-format msgid "argument %d is not a vector" msgstr "变元%d不是矢量" #: src/main/sort.c:874 msgid "argument lengths differ" msgstr "变元长度不同" #: src/main/sort.c:912 msgid "invalid ties.method for rank() [should never happen]" msgstr "rank()的ties.method不对[这是不应该发生的]" #: src/main/sort.c:967 msgid "negative value in 'x'" msgstr "'x'里有负值" #: src/main/sort.c:978 msgid "too large a range of values in 'x'" msgstr "'x'里的值的范围太大" #: src/main/source.c:134 #, fuzzy, c-format msgid "%s%d:%d: %s" msgstr "" "%s%s 于\n" "%d: %s" #: src/main/source.c:140 #, fuzzy, c-format msgid "" "%s%d:%d: %s\n" "%d: %s\n" "%*s" msgstr "" "%s%s 于\n" "%d: %s\n" "%d: %s" #: src/main/source.c:147 #, fuzzy, c-format msgid "" "%s%d:%d: %s\n" "%d: %s\n" "%d: %s\n" "%*s" msgstr "" "%s%s 于\n" "%d: %s\n" "%d: %s" #: src/main/source.c:157 #, c-format msgid "%s" msgstr "%s " #: src/main/source.c:160 #, c-format msgid "%s in \"%s\"" msgstr "%s在\"%s\"里" #: src/main/source.c:164 #, c-format msgid "" "%s in:\n" "\"%s\n" "%s\"" msgstr "" "%s 于\n" "\"%s\n" "%s\"" #: src/main/split.c:38 msgid "first argument must be a vector" msgstr "第一变元必需是矢量" #: src/main/split.c:40 msgid "second argument must be a factor" msgstr "第二变元必需是因子" #: src/main/split.c:45 msgid "Group length is 0 but data length > 0" msgstr "Group长度为零但数据长度大于零" #: src/main/split.c:47 msgid "data length is not a multiple of split variable" msgstr "数据长度不是分割变数的倍数" #: src/main/sprintf.c:86 #, fuzzy msgid "'fmt' is not a character vector" msgstr "'fmt'必需是字符矢量" #: src/main/sprintf.c:90 msgid "only 100 arguments are allowed" msgstr "只允许100个变元" #: src/main/sprintf.c:105 src/main/sprintf.c:108 msgid "arguments cannot be recycled to the same length" msgstr "不是所有的变元都一样长" #: src/main/sprintf.c:129 #, c-format msgid "'fmt' length exceeds maximal format length %d" msgstr "'fmt'长度超过了缓冲区最大长度%d" #: src/main/sprintf.c:145 msgid "unrecognised format at end of string" msgstr "不认识这种字符串尾的格式" #: src/main/sprintf.c:156 src/main/sprintf.c:163 src/main/sprintf.c:177 #: src/main/sprintf.c:184 #, c-format msgid "reference to non-existent argument %d" msgstr "不能引用不存在的变元%d" #: src/main/sprintf.c:196 msgid "at most one asterisk '*' is supported in each conversion specification" msgstr "每个轉換規格里最多只支持一个'*'号" #: src/main/sprintf.c:206 msgid "argument for '*' conversion specification must be a number" msgstr "轉換規格'*'的变元必需是数字" #: src/main/sprintf.c:280 msgid "coercion has changed vector length to 0" msgstr "矢量长度被強制改变成零" #: src/main/sprintf.c:288 #, c-format msgid "use format %d or %i for logical objects" msgstr "逻辑对象使用的格式应该是%d或%i" #: src/main/sprintf.c:302 #, c-format msgid "use format %d, %i, %x or %X for integer objects" msgstr "整数对象使用的格式应该是%d，%i，%x或%X" #: src/main/sprintf.c:316 #, c-format msgid "use format %f, %e, %g or %a for numeric objects" msgstr "数值对象使用的格式应该是%f,%e,%g或%a" #: src/main/sprintf.c:350 #, c-format msgid "use format %s for character objects" msgstr "字符对象使用的格式应该是%s" #: src/main/sprintf.c:357 #, c-format msgid "likely truncation of character string to %d characters" msgstr "字符串很可能被缩短到%d个字符" #: src/main/sprintf.c:366 msgid "unsupported type" msgstr "不支持这一种类" #: src/main/startup.c:67 msgid "R_LibraryFileName: buffer too small" msgstr "R_Library文件名字不对: 缓冲区太小" #: src/main/subassign.c:105 msgid "attempt to enlarge non-vector" msgstr "不能把非矢量变大" #: src/main/subassign.c:110 #, c-format msgid "assignment outside vector/list limits (extending from %d to %d)" msgstr "不能在矢量/串列极限外赋值(%d加大到%d)" #: src/main/subassign.c:355 #, c-format msgid "incompatible types (from %s to %s) in subassignment type fix" msgstr "下赋值fix种类里有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:447 src/main/subassign.c:721 src/main/subassign.c:724 #: src/main/subassign.c:1010 msgid "NAs are not allowed in subscripted assignments" msgstr "下标赋值里不允许NA" #: src/main/subassign.c:465 src/main/subassign.c:735 src/main/subassign.c:1002 #: src/main/subassign.c:1189 msgid "replacement has length zero" msgstr "更换变元长度为零" #: src/main/subassign.c:467 src/main/subassign.c:737 src/main/subassign.c:1004 #: src/main/subassign.c:1191 msgid "number of items to replace is not a multiple of replacement length" msgstr "被替换的项目不是替换值长度的倍数" #: src/main/subassign.c:703 msgid "incorrect number of subscripts on matrix" msgstr "矩阵里的下标数目不对" #: src/main/subassign.c:954 #, c-format msgid "incompatible types (from %s to %s) in matrix subset assignment" msgstr "矩阵子集赋值里有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:1138 #, c-format msgid "incompatible types (from %s to %s) in array subset assignment" msgstr "陈列子集赋值有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:1163 msgid "invalid number of subscripts to list assign" msgstr "串列赋值里的下标数目不对" #: src/main/subassign.c:1271 msgid "SubAssignArgs: invalid number of arguments" msgstr "SubAssignArgs: 变元数目不对" #: src/main/subassign.c:1382 msgid "result is zero-length and so cannot be a language object" msgstr "计算结果的长度为零，因此不可能是语言目标对象" #: src/main/subassign.c:1485 src/main/subassign.c:1818 msgid "no method for assigning subsets of this S4 class" msgstr "" #: src/main/subassign.c:1491 msgid "wrong args for environment subassignment" msgstr "环境下赋值的变元不对" #: src/main/subassign.c:1501 src/main/subassign.c:1523 msgid "more elements supplied than there are to replace" msgstr "用来替换的元素比所要替换的值多" #: src/main/subassign.c:1503 msgid "[[ ]] with missing subscript" msgstr "[[ ]] 缺少下标" #: src/main/subassign.c:1511 src/main/subset.c:850 #, c-format msgid "recursive indexing failed at level %d\n" msgstr "递回索引在%d层失败\n" #: src/main/subassign.c:1516 src/main/subset.c:854 #, c-format msgid "no such index at level %d\n" msgstr "在%d层没有这一索引\n" #: src/main/subassign.c:1533 src/main/subassign.c:1550 msgid "[[ ]] subscript out of bounds" msgstr "[[ ]] 下标在界限外" #: src/main/subassign.c:1539 src/main/subassign.c:1721 msgid "[[ ]] improper number of subscripts" msgstr "[[ ]] 下标数目不对" #: src/main/subassign.c:1683 #, c-format msgid "incompatible types (from %s to %s) in [[ assignment" msgstr " [[ 赋值里有不可兼容的种类(从%s到%s)" #: src/main/subassign.c:1731 #, c-format msgid "[[ ]] subscript (%d) out of bounds" msgstr "[[ ]] 下标(%d)在界限外" #: src/main/subassign.c:1774 src/main/subscript.c:133 src/main/subscript.c:135 #: src/main/subscript.c:239 src/main/subscript.c:241 src/main/subscript.c:556 #: src/main/subscript.c:558 src/main/subscript.c:657 src/main/subscript.c:659 #: src/main/subset.c:989 #, c-format msgid "invalid subscript type '%s'" msgstr "类别为'%s'的下标不对" #: src/main/subassign.c:1873 msgid "Coercing LHS to a list" msgstr "把公式左手强迫变成串列" #: src/main/subscript.c:49 src/main/subscript.c:69 src/main/subscript.c:162 msgid "attempt to select less than one element" msgstr "至少要选择一个元素" #: src/main/subscript.c:53 src/main/subscript.c:66 src/main/subscript.c:160 msgid "attempt to select more than one element" msgstr "最多只能选择一个元素" #: src/main/subscript.c:166 msgid "internal error in use of recursive indexing" msgstr "递回索引在运行时发生了内部错误" #: src/main/subscript.c:220 #, c-format msgid "further partial match of '%s' to '%s'" msgstr "'%s'进一部分匹配到'%s'" #: src/main/subscript.c:261 msgid "incorrect number of columns in matrix subscript" msgstr "矩阵下标里列的数目不对" #: src/main/subscript.c:279 msgid "negative values are not allowed in a matrix subscript" msgstr "矩阵下标里不能有负数值" #: src/main/subscript.c:316 msgid "(subscript) logical subscript too long" msgstr "(下标)逻辑下标太长" #: src/main/subscript.c:401 msgid "only 0's may be mixed with negative subscripts" msgstr "只有负下标里才能有零" #: src/main/subscript.c:468 msgid "character vector element does not have type CHARSXP" msgstr "字符矢量元素没有CHARSXP种类" #: src/main/subscript.c:547 msgid "no 'dimnames' attribute for array" msgstr "陈列中没有'dimnames'这一属性" #: src/main/subscript.c:594 msgid "subscripting on non-vector" msgstr "非矢量不能有下标" #: src/main/subset.c:269 src/main/subset.c:298 msgid "matrix subscripting not handled for this type" msgstr "这一种类不能有矩阵下标" #: src/main/subset.c:455 msgid "array subscripting not handled for this type" msgstr "这一种类不能有阵列下标" #: src/main/subset.c:711 msgid "incorrect number of dimensions" msgstr "量度数目不对" #: src/main/subset.c:804 msgid "no index specified" msgstr "没有索引设定" #: src/main/subset.c:814 #, fuzzy msgid "this S4 class is not subsettable" msgstr "对象不可以取子集" #: src/main/subset.c:820 msgid "wrong arguments for subsetting an environment" msgstr "取子集环境时的变元不对" #: src/main/summary.c:60 src/main/summary.c:575 msgid "Integer overflow - use sum(as.numeric(.))" msgstr "整数上溢；请用sum(as.numeric(.))" #: src/main/summary.c:478 #, c-format msgid "internal error ('op = %d' in do_summary).\t Call a Guru" msgstr "内部错误(do_summary里的'op = %d').\t 请向专家请教" #: src/main/summary.c:683 msgid "no non-missing arguments, returning NA" msgstr "所有的变元都不存在; 回覆NA" #: src/main/summary.c:686 msgid "no non-missing arguments to min; returning Inf" msgstr "min里所有的变元都不存在; 回覆Inf" #: src/main/summary.c:688 msgid "no non-missing arguments to max; returning -Inf" msgstr "max里所有的变元都不存在；回覆-Inf" #: src/main/summary.c:961 msgid "not all arguments have the same length" msgstr "不是所有的变元都一样长" #: src/main/summary.c:980 msgid "no arguments" msgstr "没有变元" #: src/main/summary.c:991 src/main/summary.c:1008 msgid "invalid input type" msgstr "输入种类不对" #: src/main/summary.c:1013 msgid "cannot mix 0-length vectors with others" msgstr "不能将零长度的矢量同其它长度的矢量混合在一起" #: src/main/sysutils.c:69 #, c-format msgid "cannot determine file modification time of '%s'" msgstr "无法确定文件'%s'的修改时间" #: src/main/sysutils.c:162 msgid "file name conversion problem" msgstr "转换文件名时出了问题" #: src/main/sysutils.c:163 msgid "file name conversion problem -- name too long?" msgstr "转换文件名时出了问题--名字太长了？" #: src/main/sysutils.c:227 msgid "invalid filename pattern" msgstr "文件名字式样不对" #: src/main/sysutils.c:231 msgid "no 'pattern'" msgstr "没有'pattern'" #: src/main/sysutils.c:233 msgid "no 'tempdir'" msgstr "没有'tempdir'" #: src/main/sysutils.c:315 src/main/sysutils.c:318 src/main/sysutils.c:410 #: src/main/sysutils.c:412 src/main/sysutils.c:448 msgid "wrong type for argument" msgstr "变元种类不对" #: src/main/sysutils.c:414 msgid "wrong length for argument" msgstr "变元的长度不对" #: src/main/sysutils.c:435 msgid "'Sys.setenv' is not available on this system" msgstr "本系统没有'Sys.setenv'这个功能" #: src/main/sysutils.c:480 msgid "this system cannot unset environment variables: setting to \"\"" msgstr "本系统无法復原环境变量：设成\"\"" #: src/main/sysutils.c:491 msgid "'Sys.unsetenv' is not available on this system" msgstr "本系统没有'Sys.unsetenv'这个功能" #: src/main/sysutils.c:558 msgid "'x' must be a character vector" msgstr "'x'必需是字符矢量" #: src/main/sysutils.c:642 src/main/sysutils.c:1215 src/main/sysutils.c:1222 #: src/main/sysutils.c:1228 msgid "'iconv' is not available on this system" msgstr "'iconv'本系统没有这个功能" #: src/main/sysutils.c:650 src/main/sysutils.c:713 src/main/sysutils.c:819 #: src/main/sysutils.c:881 #, c-format msgid "'%s' must be called on a CHARSXP" msgstr "'%s'只能调用在CHARSXP上" #: src/main/sysutils.c:923 msgid "invalid input in wtransChar" msgstr "wtransChar输入有错" #: src/main/sysutils.c:1339 msgid "cannot mkdir R_TempDir" msgstr "无法执行mkdir R_TempDir" #: src/main/sysutils.c:1343 src/main/sysutils.c:1350 src/main/sysutils.c:1353 msgid "unable to set R_SESSION_TMPDIR" msgstr "无法设制R_SESSION_TMPDIR " #: src/main/sysutils.c:1362 msgid "cannot allocate R_TempDir" msgstr "无法分配R_TempDir" #: src/main/sysutils.c:1381 msgid "invalid 'tempdir' in R_tmpnam" msgstr "R_tmpnam里的'tempdir'不对" #: src/main/sysutils.c:1396 msgid "cannot find unused tempfile name" msgstr "临时文件名都用完了" #: src/main/sysutils.c:1421 msgid "proc.time() is not implemented on this system" msgstr "本系统没有实现proc.time()这一功能" #: src/main/sysutils.c:1473 msgid "setTimelimit() is not implemented on this system" msgstr "本系统没有实现setTimelimit()" #: src/main/sysutils.c:1501 msgid "setSessionTimelimit() is not implemented on this system" msgstr "本系统没有实现setSessionTimelimit()" #: src/main/unique.c:284 #, c-format msgid "length %d is too large for hashing" msgstr "雜亂定址法的长度%d太大了" #: src/main/unique.c:381 src/main/unique.c:409 msgid "'duplicated' applies only to vectors" msgstr "'duplicated'只适用于矢量" #: src/main/unique.c:455 #, c-format msgid "%s() applies only to vectors" msgstr "%s()只适用于矢量" #: src/main/unique.c:661 msgid "'match' requires vector arguments" msgstr "'match'需要矢量变元" #: src/main/unique.c:707 src/main/unique.c:820 msgid "argument is not of mode character" msgstr "变元不是字符状态" #: src/main/unique.c:912 msgid "... used in a situation where it doesn't exist" msgstr "... 用在它不存在的地方了" #: src/main/unique.c:1003 msgid "unable to find a closure from within which 'match.call' was called" msgstr "找不到调用'match.call'的闭合" #: src/main/unique.c:1160 msgid "non-numeric matrix in rowsum(): this cannot happen" msgstr "rowsum()里出现了非数值矩阵：这不应该发生" #: src/main/unique.c:1194 msgid "non-numeric data frame in rowsum" msgstr "rowsum里不能有非数值数据框" #: src/main/unique.c:1220 msgid "this cannot happen" msgstr "这不应该发生" #: src/main/unique.c:1274 msgid "'names' must be a character vector" msgstr "'names'必需是字符矢量" #: src/main/unique.c:1278 msgid "'sep' must be a character string" msgstr "'sep'必需是字符串" #: src/main/unique.c:1357 msgid "csduplicated not called on a STRSXP" msgstr "csduplicated不能调用在STRSXP上" #: src/main/util.c:82 src/main/util.c:100 msgid "object is not a matrix" msgstr "对象不是矩阵" #: src/main/util.c:247 src/main/util.c:259 src/main/util.c:273 #, c-format msgid "type %d is unimplemented in '%s'" msgstr "'%2$s'里的%1$d种类还没有被实现" #: src/main/util.c:283 #, c-format msgid "unimplemented type '%s' in '%s'\n" msgstr "种类'%s'目前没有在'%s'里实现\n" #: src/main/util.c:285 #, c-format msgid "unimplemented type (%d) in '%s'\n" msgstr "(%d)种类目前没有在'%s'里实现\n" #: src/main/util.c:415 msgid "invalid tag in name extraction" msgstr "抽取名字的标记不对" #: src/main/util.c:442 #, fuzzy, c-format msgid "'nthcdr' list shorter than %d" msgstr "\"nthcdr\"串列比%d要短" #: src/main/util.c:447 #, fuzzy msgid "'nthcdr' needs a list to CDR down" msgstr "\"nthcdr\"需要CDR串列" #: src/main/util.c:563 msgid "'all.x' must be TRUE or FALSE" msgstr "'all.x'必需是TRUE或FALSE" #: src/main/util.c:565 msgid "'all.y' must be TRUE or FALSE" msgstr "'all.y'必需是TRUE或FALSE" #: src/main/util.c:682 msgid "missing value is invalid" msgstr "遗漏值不对" #: src/main/util.c:691 src/main/util.c:700 msgid "cannot change working directory" msgstr "无法改变工作目录" #: src/main/util.c:719 src/main/util.c:753 src/main/util.c:794 #: src/main/util.c:834 src/main/util.c:871 src/main/util.c:921 #: src/main/util.c:942 msgid "a character vector argument expected" msgstr "需要字符矢量变元" #: src/main/util.c:726 src/main/util.c:761 src/main/util.c:802 #: src/main/util.c:842 msgid "path too long" msgstr "路径太长" #: src/main/util.c:885 msgid "only the first character of 'quote' will be used" msgstr "只用了'quote'的第一个字符" #: src/main/util.c:944 msgid "a character vector 'value' expected" msgstr "需要字符矢量'value'" #: src/main/util.c:947 msgid "'value' must be of positive length" msgstr "'value'的长度必需是正数" #: src/main/util.c:1074 src/main/util.c:1082 #, c-format msgid "invalid input '%s' in 'utf8towcs'" msgstr "'utf8towcs'里的输入'%s'不对" #: src/main/util.c:1167 #, c-format msgid "invalid multibyte string at '%s'" msgstr "'%s'多字节字符串有错" #: src/main/util.c:1282 msgid "error message truncated to 255 chars" msgstr "错误信息缩短到255个字节" #: src/main/util.c:1295 msgid "warning message truncated to 255 chars" msgstr "警告信息缩短到255个字节" #: src/main/util.c:1708 msgid "ICU is not supported on this build" msgstr "本平台不支持ICU" #: src/main/version.c:39 msgid "" "R is free software and comes with ABSOLUTELY NO WARRANTY.\n" "You are welcome to redistribute it under certain conditions.\n" "Type 'license()' or 'licence()' for distribution details.\n" "\n" msgstr "" "R是自由软件软件，不带任何担保。\n" "在某些条件下你可以将其自由散布。\n" "用'license()'或'licence()'来看散布的详细条件。\n" "\n" #: src/main/version.c:42 msgid "" "R is a collaborative project with many contributors.\n" "Type 'contributors()' for more information and\n" "'citation()' on how to cite R or R packages in publications.\n" "\n" msgstr "" "R是个合作计划，有许多人为之做出了贡献.\n" "用'contributors()'来看合作者的详细情况\n" "用'citation()'会告诉你如何在出版物中正确地引用R或R程序包。\n" "\n" #: src/main/version.c:45 msgid "" "Type 'demo()' for some demos, 'help()' for on-line help, or\n" "'help.start()' for an HTML browser interface to help.\n" "Type 'q()' to quit R.\n" "\n" msgstr "" "用'demo()'来看一些示范程序，用'help()'来阅读在线帮助文件，或\n" "用'help.start()'通过HTML浏览器来看帮助文件。\n" "用'q()'退出R.\n" "\n" #: src/main/vfonts.c:50 msgid "vfont routines cannot be accessed in module" msgstr "模块里没有vfont例行程序" #: src/main/vfonts.c:63 src/main/vfonts.c:76 src/main/vfonts.c:92 msgid "Hershey fonts cannot be loaded" msgstr "无法载入Hershey字形" #: src/main/xspline.c:58 #, c-format msgid "add_point - reached MAXNUMPTS (%d)" msgstr "add_point-达到了MAXNUMPTS所设定的值(%d)" #: src/main/xspline.c:72 msgid "insufficient memory to allocate point array" msgstr "没有足够的内存以分配给数点排列" #: src/main/xspline.c:470 msgid "There must be at least two control points" msgstr "至少得有两个控制点" #: src/main/xspline.c:472 msgid "There must be at least four control points" msgstr "至少得有四个控制点" #: src/main/xspline.c:532 msgid "There must be at least three control points" msgstr "至少得有三个控制点" #: src/modules/internet/internet.c:186 src/modules/internet/internet.c:190 #: src/modules/internet/internet.c:196 src/modules/internet/internet.c:208 msgid "allocation of url connection failed" msgstr "url链结分配失败" #: src/modules/internet/internet.c:285 msgid "only first element of 'url' argument used" msgstr "只用'url'变元的第一个元素" #: src/modules/internet/internet.c:291 msgid "only first element of 'destfile' argument used" msgstr "只用'destfile'变元的第一个元素" #: src/modules/internet/internet.c:316 msgid "Download progress" msgstr "正在下载" #: src/modules/internet/internet.c:338 #, c-format msgid "cannot open URL '%s', reason '%s'" msgstr "无法打开URL'%s'，原因是'%s'" #: src/modules/internet/internet.c:344 src/modules/internet/internet.c:370 #: src/modules/internet/internet.c:472 #, c-format msgid "cannot open destfile '%s', reason '%s'" msgstr "无法打开目的文件'%s'，原因是'%s'" #: src/modules/internet/internet.c:375 src/modules/internet/internet.c:477 #, c-format msgid "trying URL '%s'\n" msgstr "试开URL’%s'\n" #: src/modules/internet/internet.c:382 src/modules/internet/internet.c:484 msgid "opened URL\n" msgstr "打开了URL\n" #: src/modules/internet/internet.c:454 src/modules/internet/internet.c:559 #, c-format msgid "downloaded length %d != reported length %d" msgstr "下载的长度%d不等于报告的长度%d" #: src/modules/internet/internet.c:458 src/modules/internet/internet.c:563 #, c-format msgid "cannot open URL '%s'" msgstr "无法打开URL'%s'" #: src/modules/internet/internet.c:591 src/modules/internet/internet.c:826 #, c-format msgid "cannot open: HTTP status was '%d %s'" msgstr "无法打开: HTTP状态是'%d%s'" #: src/modules/internet/internet.c:770 src/modules/internet/internet.c:933 msgid "InternetOpenUrl timed out" msgstr "InternetOpenUrl超时" #: src/modules/internet/internet.c:797 src/modules/internet/internet.c:811 #: src/modules/internet/internet.c:955 src/modules/internet/internet.c:964 #, c-format msgid "InternetOpenUrl failed: '%s'" msgstr "InternetOpenUrl失败:’%s'" #: src/modules/internet/internet.c:868 msgid "Internet read timed out" msgstr "互联网读取超时" #: src/modules/internet/nanoftp.c:288 src/modules/internet/nanoftp.c:301 #: src/modules/internet/nanoftp.c:312 src/modules/internet/nanoftp.c:346 #: src/modules/internet/nanoftp.c:356 msgid "RxmlNanoFTPScanURL: overlong (invalid?) URL" msgstr "RxmlNanoFTPScanURL: URL太长了(或格式不对？)" #: src/modules/internet/nanoftp.c:389 msgid "removing FTP proxy info" msgstr "删除FTP代理主机信息" #: src/modules/internet/nanoftp.c:391 #, c-format msgid "using FTP proxy '%s'" msgstr "用FTP代理主机'%s'" #: src/modules/internet/nanoftp.c:402 src/modules/internet/nanoftp.c:431 msgid "RxmlNanoFTPScanProxy: overlong (invalid?) URL" msgstr "RxmlNanoFTPScanProxy: URL太长了(或格式不对？)" #: src/modules/internet/nanoftp.c:830 msgid "cannot resolve host" msgstr "无法分辨主机" #: src/modules/internet/nanoftp.c:860 msgid "failed to connect to server" msgstr "连接不上伺服器" #: src/modules/internet/nanoftp.c:871 msgid "failed to get response from server" msgstr "伺服器没有反应" #: src/modules/internet/nanoftp.c:1134 msgid "RxmlNanoFTPGetConnection: failed to create socket" msgstr "RxmlNanoFTPGetConnection: 建立插坐失败" #: src/modules/internet/nanoftp.c:1180 msgid "failed to create a data connection" msgstr "建立数据链结失败" #: src/modules/internet/nanoftp.c:1188 msgid "failed to bind a port" msgstr "连接通訊埠失败" #: src/modules/internet/nanoftp.c:1195 #, c-format msgid "could not listen on port %d" msgstr "无法从通訊埠%d听取数据" #: src/modules/internet/nanohttp.c:362 src/modules/internet/nanohttp.c:390 #: src/modules/internet/nanohttp.c:399 msgid "RxmlNanoHTTPScanURL: overlong (invalid?) URL" msgstr "RxmlNanoHTTPScanURL: URL太长了(或格式不对？)" #: src/modules/internet/nanohttp.c:433 msgid "removing HTTP proxy info" msgstr "删除HTTP代理主机信息" #: src/modules/internet/nanohttp.c:435 #, c-format msgid "using HTTP proxy '%s'" msgstr "用HTTP代理主机'%s'" #: src/modules/internet/nanohttp.c:446 src/modules/internet/nanohttp.c:482 msgid "RxmlNanoHTTPScanProxy: overlong (invalid?) URL" msgstr "RxmlNanoHTTPScanProxy: URL太长了(或格式不对？)" #: src/modules/internet/nanohttp.c:1099 #, c-format msgid "unable to resolve '%s'" msgstr "无法解决'%s'." #: src/modules/internet/nanohttp.c:1126 #, c-format msgid "connected to '%s' on port %d." msgstr "由通訊埠%2$d接通到'%1$s'." #: src/modules/internet/nanohttp.c:1131 #, c-format msgid "unable to connect to '%s' on port %d." msgstr "无法通过通訊埠%2$d连接到'%1$s'." #: src/modules/internet/nanohttp.c:1434 #, c-format msgid "redirect to: '%s'" msgstr "重新寄送到: '%s'" #: src/modules/internet/nanohttp.c:1444 msgid "too many redirects, aborting ..." msgstr "太多重新寄送，中断工作 ..." #: src/modules/internet/sockconn.c:176 src/modules/internet/sockconn.c:180 #: src/modules/internet/sockconn.c:186 src/modules/internet/sockconn.c:199 msgid "allocation of socket connection failed" msgstr "分配插坐链结失败" #: src/modules/lapack/Lapack.c:43 src/modules/lapack/Lapack.c:62 #, c-format msgid "argument type[1]='%s' must be a character string of string length 1" msgstr "变元type[1]='%s'必需是长度为一的字符矢量" #: src/modules/lapack/Lapack.c:51 #, c-format msgid "argument type[1]='%s' must be one of 'M','1','O','I','F' or 'E'" msgstr "type[1]='%s'变元必需取'M','1','O','I','F'或'E'其中的一个" #: src/modules/lapack/Lapack.c:68 #, c-format msgid "argument type[1]='%s' must be one of '1','O', or 'I'" msgstr "type[1]='%s'变元必需取'1','O'或'I'其中的一个" #: src/modules/lapack/Lapack.c:83 src/modules/lapack/Lapack.c:672 msgid "'jobu' and 'jobv' must be character strings" msgstr "'jobu'和'jobv'必需是字符对象" #: src/modules/lapack/Lapack.c:85 msgid "'method' must be a character string" msgstr "'method'必需是字符串" #: src/modules/lapack/Lapack.c:106 src/modules/lapack/Lapack.c:115 #: src/modules/lapack/Lapack.c:170 src/modules/lapack/Lapack.c:181 #: src/modules/lapack/Lapack.c:256 src/modules/lapack/Lapack.c:262 #: src/modules/lapack/Lapack.c:552 src/modules/lapack/Lapack.c:558 #: src/modules/lapack/Lapack.c:602 src/modules/lapack/Lapack.c:609 #: src/modules/lapack/Lapack.c:613 src/modules/lapack/Lapack.c:647 #: src/modules/lapack/Lapack.c:654 src/modules/lapack/Lapack.c:685 #: src/modules/lapack/Lapack.c:694 src/modules/lapack/Lapack.c:740 #: src/modules/lapack/Lapack.c:746 src/modules/lapack/Lapack.c:801 #: src/modules/lapack/Lapack.c:807 src/modules/lapack/Lapack.c:973 #: src/modules/lapack/Lapack.c:979 src/modules/lapack/Lapack.c:1018 #: src/modules/lapack/Lapack.c:1025 src/modules/lapack/Lapack.c:1029 #: src/modules/lapack/Lapack.c:1058 src/modules/lapack/Lapack.c:1065 #: src/modules/lapack/Lapack.c:1089 #, c-format msgid "error code %d from Lapack routine '%s'" msgstr "Lapack例行程序'%2$s'回复了%1$d错误代码" #: src/modules/lapack/Lapack.c:149 src/modules/lapack/Lapack.c:235 #: src/modules/lapack/Lapack.c:727 src/modules/lapack/Lapack.c:780 msgid "'x' must be a square numeric matrix" msgstr "'x'必需是正方形的数值矩阵" #: src/modules/lapack/Lapack.c:312 src/modules/lapack/Lapack.c:368 #: src/modules/lapack/Lapack.c:410 src/modules/lapack/Lapack.c:459 msgid "'norm' must be a character string" msgstr "'norm'必需是字符串" #: src/modules/lapack/Lapack.c:319 src/modules/lapack/Lapack.c:376 msgid "'A' must be a numeric matrix" msgstr "'A'必需是数值矩阵" #: src/modules/lapack/Lapack.c:340 #, c-format msgid "error [%d] from Lapack 'dgetrf()'" msgstr "Lapack例行程序'dgetrf()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:345 #, c-format msgid "exact singularity: U[%d,%d] = 0 in LU-decomposition {Lapack 'dgetrf()'}" msgstr "精密奇异：LU-分解里产生了U[%d,%d] = 0 {Lapack 'dgetrf()'}" #: src/modules/lapack/Lapack.c:357 #, c-format msgid "error [%d] from Lapack 'dgecon()'" msgstr "Lapack例行程序'dgecon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:382 src/modules/lapack/Lapack.c:416 #: src/modules/lapack/Lapack.c:465 msgid "'A' must be a *square* matrix" msgstr "'A'必需是*正方形*矩阵" #: src/modules/lapack/Lapack.c:396 #, c-format msgid "error [%d] from Lapack 'dtrcon()'" msgstr "Lapack例行程序'dtrcon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:412 src/modules/lapack/Lapack.c:461 msgid "'A' must be a complex matrix" msgstr "'A'必需是复数矩阵" #: src/modules/lapack/Lapack.c:434 #, c-format msgid "error [%d] from Lapack 'zgetrf()'" msgstr "Lapack例行程序'zgetrf()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:442 #, c-format msgid "error [%d] from Lapack 'zgecon()'" msgstr "Lapack例行程序'zgecon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:446 src/modules/lapack/Lapack.c:480 #: src/modules/lapack/Lapack.c:524 src/modules/lapack/Lapack.c:574 #: src/modules/lapack/Lapack.c:617 src/modules/lapack/Lapack.c:658 #: src/modules/lapack/Lapack.c:707 src/modules/lapack/Lapack.c:763 #: src/modules/lapack/Lapack.c:824 msgid "Fortran complex functions are not available on this platform" msgstr "本平台不能用Fortran复数功能" #: src/modules/lapack/Lapack.c:477 #, c-format msgid "error [%d] from Lapack 'ztrcon()'" msgstr "Lapack例行程序'ztrcon()'回复了[%d]错误代码" #: src/modules/lapack/Lapack.c:495 src/modules/lapack/Lapack.c:538 msgid "'a' must be a complex matrix" msgstr "'a'必需是复数矩阵" #: src/modules/lapack/Lapack.c:497 src/modules/lapack/Lapack.c:588 #: src/modules/lapack/Lapack.c:631 msgid "'b' must be a complex matrix" msgstr "'b'必需是复数矩阵" #: src/modules/lapack/Lapack.c:502 src/modules/lapack/Lapack.c:924 msgid "'a' is 0-diml" msgstr "'a'是0-diml" #: src/modules/lapack/Lapack.c:504 src/modules/lapack/Lapack.c:926 msgid "no right-hand side in 'b'" msgstr "'b'在等号右手没有公式" #: src/modules/lapack/Lapack.c:506 src/modules/lapack/Lapack.c:928 #, c-format msgid "'a' (%d x %d) must be square" msgstr "'a'(%d x %d)必需是正方形的" #: src/modules/lapack/Lapack.c:508 src/modules/lapack/Lapack.c:930 #, c-format msgid "'b' (%d x %d) must be compatible with 'a' (%d x %d)" msgstr "'b' (%d x %d)必需与'a'(%d x %d)相容" #: src/modules/lapack/Lapack.c:517 src/modules/lapack/Lapack.c:854 #: src/modules/lapack/Lapack.c:896 src/modules/lapack/Lapack.c:939 #, c-format msgid "argument %d of Lapack routine %s had invalid value" msgstr "Lapack例行程序%2$s里的%1$d变元值不对" #: src/modules/lapack/Lapack.c:595 src/modules/lapack/Lapack.c:640 #: src/modules/lapack/Lapack.c:1011 src/modules/lapack/Lapack.c:1051 #, c-format msgid "right-hand side should have %d not %d rows" msgstr "公式右手应该有%d而不是%d行" #: src/modules/lapack/Lapack.c:841 src/modules/lapack/Lapack.c:1084 msgid "'a' must be a square matrix" msgstr "'a'必需是正方形矩阵" #: src/modules/lapack/Lapack.c:842 msgid "'a' must have dims > 0" msgstr "'a'的dims必需大于零" #: src/modules/lapack/Lapack.c:852 #, c-format msgid "the leading minor of order %d is not positive definite" msgstr "%d数位主次为非正定" #: src/modules/lapack/Lapack.c:860 src/modules/lapack/Lapack.c:881 #: src/modules/lapack/Lapack.c:917 src/modules/lapack/Lapack.c:960 #: src/modules/lapack/Lapack.c:1077 msgid "'a' must be a numeric matrix" msgstr "'a'必需是数值矩阵" #: src/modules/lapack/Lapack.c:868 msgid "'size' argument must be a positive integer" msgstr "'size'变元必需是正整数" #: src/modules/lapack/Lapack.c:883 #, c-format msgid "'size' cannot exceed ncol(x) = %d" msgstr "'size'不能超过ncol(x)=%d" #: src/modules/lapack/Lapack.c:884 #, c-format msgid "'size' cannot exceed nrow(x) = %d" msgstr "'size'不能超过nrow(x)=%d" #: src/modules/lapack/Lapack.c:894 #, c-format msgid "element (%d, %d) is zero, so the inverse cannot be computed" msgstr "元素(%d,%d)为零, 因此无法求逆" #: src/modules/lapack/Lapack.c:919 src/modules/lapack/Lapack.c:1004 #: src/modules/lapack/Lapack.c:1042 msgid "'b' must be a numeric matrix" msgstr "'b'必需是数值矩阵" #: src/modules/lapack/Lapack.c:942 msgid "Lapack routine dgesv: system is exactly singular" msgstr "Lapack例行程序dgesv: 系统正好是奇异的" #: src/modules/lapack/Lapack.c:947 #, c-format msgid "system is computationally singular: reciprocal condition number = %g" msgstr "系统计算上是奇异的: 倒条件数=%g" #: src/modules/lapack/Lapack.c:1079 msgid "argument 'logarithm' must be logical" msgstr "变元'logarithm'必需是逻辑值" #: src/modules/X11/devX11.c:291 msgid "cannot set grayscale: reverting to monochrome" msgstr "无法设灰度: 用黑白颜色" #: src/modules/X11/devX11.c:374 msgid "" "X11 driver unable to obtain color cube\n" " reverting to monochrome" msgstr "X11驱动程序无法打开颜色文块，转用黑白色。" #: src/modules/X11/devX11.c:419 msgid "" "Error: X11 cannot allocate additional graphics colors.\n" "Consider using X11 with colortype=\"pseudo.cube\" or \"gray\"." msgstr "" "错误：X11无法分配额外的图案颜色。\n" "请考虑用colortype=\"pseudo.cube\"或\"gray\"选项来调用X11。" #: src/modules/X11/devX11.c:862 msgid "" "could not find any X11 fonts\n" "Check that the Font Path is correct." msgstr "" "找不到任何X11字形\n" "请检查字形路径设得是不是对。" #: src/modules/X11/devX11.c:926 #, c-format msgid "X11 used font size %d when %d was requested" msgstr "虽然需要的是%2$d，但X11却大小为%1$d的字形" #: src/modules/X11/devX11.c:960 #, c-format msgid "X11 font %s, face %d at size %d could not be loaded" msgstr "无法载入X11字面为%2$d,大小为%3$d的字形%1$s" #: src/modules/X11/devX11.c:969 msgid "" "semi-transparency is not supported on this device: reported only once per " "page" msgstr "这装置不支持半透明输出：每一页只提醒一次" #: src/modules/X11/devX11.c:1079 #, c-format msgid "X11 protocol error: %s" msgstr "X11協定错误:%s" #: src/modules/X11/devX11.c:1087 #, c-format msgid "X11 I/O error while opening X11 connection to '%s'" msgstr "在打开'%s'链结的时候X11 I/O出错" #: src/modules/X11/devX11.c:1105 msgid "X11 fatal IO error: please save work and shut down R" msgstr "X11致命的IO错误: 请保存工作数据，然后重新启动R" #: src/modules/X11/devX11.c:1163 msgid "locale not supported by Xlib: some X ops will operate in C locale" msgstr "Xlib不支持语言环境: 某些X操作指令将在C语言环境中起动" #: src/modules/X11/devX11.c:1164 msgid "X cannot set locale modifiers" msgstr "X无法设定语言环境修飾器" #: src/modules/X11/devX11.c:1168 msgid "no png support in this version of R" msgstr "本R版本不支持png" #: src/modules/X11/devX11.c:1174 msgid "filename too long in png() call" msgstr "png()调用时文件名字太长" #: src/modules/X11/devX11.c:1178 #, c-format msgid "could not open PNG file '%s'" msgstr "无法打开PNG文件'%s'" #: src/modules/X11/devX11.c:1190 msgid "no jpeg support in this version of R" msgstr "本R版本不支持jpeg" #: src/modules/X11/devX11.c:1200 msgid "filename too long in jpeg() call" msgstr "jpeg()调用时文件名字太长" #: src/modules/X11/devX11.c:1204 #, c-format msgid "could not open JPEG file '%s'" msgstr "无法打开JPEG文件'%s'" #: src/modules/X11/devX11.c:1216 msgid "no tiff support in this version of R" msgstr "本R版本不支持tiff" #: src/modules/X11/devX11.c:1224 msgid "filename too long in tiff() call" msgstr "tiff()调用时文件名字太长" #: src/modules/X11/devX11.c:1236 msgid "filename too long in bmp() call" msgstr "bmp()调用时文件名字太长" #: src/modules/X11/devX11.c:1240 #, c-format msgid "could not open BMP file '%s'" msgstr "无法打开BMP文件'%s'" #: src/modules/X11/devX11.c:1270 #, c-format msgid "unable to open connection to X11 display '%s'" msgstr "无法打开链结到X11显示'%s'" #: src/modules/X11/devX11.c:1281 msgid "ignoring 'display' argument as an X11 device is already open" msgstr "因为X11设备已经打开了，'display'变元略过不用" #: src/modules/X11/devX11.c:1292 msgid "jpeg() does not support transparency: using white bg" msgstr "jpeg()不支持透明绘图: 用白色的背景" #: src/modules/X11/devX11.c:1392 #, c-format msgid "unable to obtain information on display '%s'" msgstr "找不到关于'%s'显示的信息" #: src/modules/X11/devX11.c:1410 msgid "unable to create X11 window" msgstr "无法建立X11窗口" #: src/modules/X11/devX11.c:1504 #, c-format msgid "'width=%d, height=%d' are unlikely values in pixels" msgstr "'width=%d, height=%d'作为象素值很有可能不对" #: src/modules/X11/devX11.c:1509 msgid "unable to create pixmap" msgstr "无法建立像映" #: src/modules/X11/devX11.c:1580 msgid "font family not found in X11 font database" msgstr "X11字形数据库里没有这一字形家族" #: src/modules/X11/devX11.c:1623 #, c-format msgid "invalid use of %d < 0 in '%s'" msgstr "'%2$s'里%1$d < 0用得不对" #: src/modules/X11/devX11.c:1772 src/modules/X11/devX11.c:2841 #, c-format msgid "could not open file '%s'" msgstr "无法打开文件'%s'" #: src/modules/X11/devX11.c:2238 msgid "type=\"cairo\" is not supported on this build -- using \"Xlib\"" msgstr "本平台不支持type=\"cairo\" --用\"Xlib\"" #: src/modules/X11/devX11.c:2538 msgid "invalid string argument" msgstr "字符串变元不对" #: src/modules/X11/devX11.c:2564 #, c-format msgid "unable to start device %s" msgstr "无法打开%s设备" #: src/modules/X11/devX11.c:2589 msgid "invalid 'width' or 'height'" msgstr "'width'或'height'不对" #: src/modules/X11/devX11.c:2596 msgid "invalid colortype passed to X11 driver" msgstr "传给X11驅動器的颜色种类不对" #: src/modules/X11/devX11.c:2610 msgid "unknown X11 color/colour model -- using monochrome" msgstr "没有这种X11颜色/颜色模型 --用黑白色的" #: src/modules/X11/devX11.c:2695 msgid "no plot on device to save" msgstr "没有可以保存的设备" #: src/modules/X11/devX11.c:2697 msgid "not an open X11cairo device" msgstr "不是已打开的X11cairo设备" #: src/modules/X11/devX11.c:2708 #, c-format msgid "cannot open file '%s'" msgstr "无法打开文件'%s'" #: src/modules/X11/devX11.c:2721 src/modules/X11/devX11.c:2723 #, c-format msgid "type = \"%s\" requires cairo >= 1.2: try \"png\"" msgstr "type = \"%s\"需要cairo >= 1.2: 试用\"png\"一下" #: src/modules/X11/devX11.c:2732 msgid "savePlot() is not supported on this build" msgstr "本平台不支持savePlot()" #: src/modules/X11/devX11.c:2769 src/modules/X11/devX11.c:2942 #: src/modules/X11/devX11.c:2953 msgid "unimplemented cairo-based device" msgstr "没有实现以cairo为基础的设备" #: src/modules/X11/devX11.c:3165 msgid "'type = \"cairo\"' requires cairo >= 1.2 : try 'type = \"cairo1\"'" msgstr "'type = \"cairo\"'需要cairo >= 1.2: 试用\" cairo1\"一下" #: src/modules/X11/devX11.c:3167 #, c-format msgid "device '%s' requires cairo >= 1.2" msgstr "'%s'设备需要cairo >= 1.2" #: src/modules/X11/devX11.c:3179 #, c-format msgid "unable to start device '%s'" msgstr "无法启动'%s'设备" #: src/modules/X11/devX11.c:3191 msgid "cairo-based devices are not supported on this build" msgstr "本平台不支持以cairo为基础的设备" #: src/modules/X11/devX11.c:3230 msgid "unable to contact X11 display" msgstr "无法链结到X11显示" #: src/modules/X11/devX11.c:3301 msgid "cannot allocate memory for X11Routines structure" msgstr "无法为X11Routines结构分配内存" #: src/nmath/bessel_i.c:67 msgid "bessel_i allocation error" msgstr "bessel_i分配错误" #: src/nmath/bessel_i.c:75 #, c-format msgid "bessel_i(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_i(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 变元在范围外?\n" #: src/nmath/bessel_i.c:78 #, c-format msgid "bessel_i(%g,nu=%g): precision lost in result\n" msgstr "bessel_i(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/bessel_j.c:63 msgid "bessel_j allocation error" msgstr "Bessel_j分配错误" #: src/nmath/bessel_j.c:71 #, c-format msgid "bessel_j(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_j(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 变元在范围外?\n" #: src/nmath/bessel_j.c:74 #, c-format msgid "bessel_j(%g,nu=%g): precision lost in result\n" msgstr "bessel_j(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/bessel_k.c:60 msgid "bessel_k allocation error" msgstr "bessel_k分配错误" #: src/nmath/bessel_k.c:68 #, c-format msgid "bessel_k(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_k(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 变元在范围外?\n" #: src/nmath/bessel_k.c:71 #, c-format msgid "bessel_k(%g,nu=%g): precision lost in result\n" msgstr "bessel_k(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/bessel_y.c:62 msgid "bessel_y allocation error" msgstr "bessel_y分配错误" #: src/nmath/bessel_y.c:72 #, c-format msgid "bessel_y(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_y(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 变元在范围外?\n" #: src/nmath/bessel_y.c:75 #, c-format msgid "bessel_y(%g,nu=%g): precision lost in result\n" msgstr "bessel_y(%g,nu=%g): 结果的精确度有损害\n" #: src/nmath/pnchisq.c:218 #, c-format msgid "pnchisq(x=%g, ..): not converged in %d iter." msgstr "pnchisq(x=%g, ..):%d次循环后还没有聚合." #: src/nmath/polygamma.c:474 #, c-format msgid "deriv = %d > %d (= n_max)\n" msgstr "deriv = %d > %d (= n_max)\n" #: src/nmath/rmultinom.c:78 #, c-format msgid "rbinom: probability sum should be 1, but is %g" msgstr "rbinom: 机率和应该为一, 而不是%g" #: src/nmath/signrank.c:77 msgid "signrank allocation error" msgstr "signrank分配错误" #: src/nmath/snorm.c:326 #, c-format msgid "norm_rand(): invalid N01_kind: %d\n" msgstr "norm_rand(): N01_kind:%d不对\n" #: src/nmath/wilcox.c:85 src/nmath/wilcox.c:95 src/nmath/wilcox.c:148 #: src/nmath/wilcox.c:310 #, c-format msgid "wilcox allocation error %d" msgstr "wilcox分配错误%d" #: src/unix/dynload.c:143 msgid "" "Explicit local dynamic loading not supported on this platform. Using default." msgstr "本系统不支持明晰本地动态载入。用缺席值。" #: src/unix/dynload.c:144 msgid "" "Explicit global dynamic loading not supported on this platform. Using " "default." msgstr "本系统不支持明晰整体动态载入。用缺席值。" #: src/unix/dynload.c:145 msgid "" "Explicit non-lazy dynamic loading not supported on this platform. Using " "default." msgstr "本系统不支持明晰非缓慢动态载入。用缺席值。" #: src/unix/dynload.c:146 msgid "" "Explicit lazy dynamic loading not supported on this platform. Using default." msgstr "本系统不支持明晰缓慢动态载入。用缺席值。" #: src/unix/dynload.c:240 msgid "cannot get working directory!" msgstr "找不到工作目录" #: src/unix/edit.c:109 msgid "invalid argument to edit()" msgstr "edit()变元不对" #: src/unix/edit.c:137 msgid "argument 'editor' type not valid" msgstr "变元'editor'的种类不对" #: src/unix/edit.c:139 msgid "argument 'editor' is not set" msgstr "变元'editor'还没有被设定" #: src/unix/edit.c:144 msgid "'title' must be a string" msgstr "'title'必需是字符串" #: src/unix/edit.c:162 #, c-format msgid "unable to run editor '%s'" msgstr "无法启动编辑器'%s'" #: src/unix/edit.c:164 msgid "editor ran but returned error status" msgstr "启动了编辑器但回覆错误状态" #: src/unix/edit.c:174 #, c-format msgid "problem with running editor %s" msgstr "启动编辑器%s时出了问题" #: src/unix/edit.c:187 msgid "unable to open file to read" msgstr "无法打开文件来读取数据" #: src/unix/edit.c:195 #, c-format msgid "" "%s occurred on line %d\n" " use a command like\n" " x <- edit()\n" " to recover" msgstr "%s错误出现在%d行上，请用类似于x <- edit()的指令来回到原来状态" #: src/unix/sys-std.c:129 msgid "interrupt handler must not return" msgstr "中断處置程式不能有回覆值" #: src/unix/sys-std.c:516 msgid "" "An unusual circumstance has arisen in the nesting of readline input. Please " "report using bug.report()" msgstr "读行输入嵌套出了不寻常的错，请用bug.report()" #: src/unix/sys-std.c:860 msgid "re-encoding is not available on this system" msgstr "本系统没有重编码这个功能" #: src/unix/sys-std.c:1134 #, c-format msgid "" "Cannot open file '%s': %s\n" "\n" msgstr "无法打开文件'%s': %s\n" #: src/unix/sys-std.c:1198 src/unix/sys-std.c:1221 msgid "'file' argument is too long" msgstr "'file'变元太长" #: src/unix/sys-std.c:1204 src/unix/sys-std.c:1206 msgid "no history mechanism available" msgstr "没有历史功能" #: src/unix/sys-std.c:1230 src/unix/sys-std.c:1232 msgid "no history available to save" msgstr "没有可以保存的历史" #: src/unix/sys-std.c:1338 msgid "Sys.sleep is not implemented on this system" msgstr "本系统没有实现Sys.sleep这一功能" #: src/unix/sys-unix.c:259 msgid "non-empty character argument expected" msgstr "需要非空字符变元" #: src/unix/sys-unix.c:263 msgid "'intern' must be logical and not NA" msgstr "'intern’必需是逻辑值而不是NA" #: src/unix/sys-unix.c:276 #, c-format msgid "line %d may be truncated in call to system(, intern = TRUE)" msgstr "调用system(, intern = TRUE)时%d行可能会被截断" #: src/unix/sys-unix.c:292 msgid "'intern=TRUE' is not implemented on this platform" msgstr "本系统没有实现intern=TRUE这一功能" #: src/unix/sys-unix.c:365 msgid "Sys.info() is not implemented on this system" msgstr "本系统没有实现Sys.info()这一功能" #: src/unix/system.c:249 #, c-format msgid "WARNING: --gui or -g without value ignored" msgstr "警告: --gui或-g选项没有值，因此略过不用" #: src/unix/system.c:271 #, c-format msgid "WARNING: unknown gui '%s', using X11\n" msgstr "警告: 没有这种gui ’%s', 用X11\n" #: src/unix/system.c:274 #, c-format msgid "WARNING: unknown gui '%s', using none\n" msgstr "警告: 没有这种gui ’%s', 因此什么都不用\n" #: src/unix/system.c:368 msgid "creating temporary file for '-e' failed" msgstr "为'-e'建立临时文件失败" #: src/unix/system.c:449 msgid "WARNING: Only editing the first in the list of files" msgstr "警告: 只修改文件串列中的第一个元素" #: src/unix/X11.c:52 msgid "X11 module is not available under this GUI" msgstr "GUI里没有X11模块" #: src/unix/X11.c:58 msgid "X11 routines cannot be accessed in module" msgstr "模块没有X11例行程序" #: src/unix/X11.c:75 src/unix/X11.c:86 src/unix/X11.c:97 src/unix/X11.c:116 #: src/unix/X11.c:127 src/unix/X11.c:138 src/unix/X11.c:149 msgid "X11 module cannot be loaded" msgstr "无法载入X11模块" #: src/unix/X11.c:162 src/unix/X11.c:168 src/unix/X11.c:174 src/unix/X11.c:181 #: src/unix/X11.c:188 src/unix/X11.c:194 src/unix/X11.c:200 msgid "X11 is not available" msgstr "没有X11平台这一功能" #~ msgid "zero-length argument" #~ msgstr "零长度变元" #~ msgid "first argument is not a matrix" #~ msgstr "第一个变元不是矩阵" #~ msgid "coordinates outsize specified range" #~ msgstr "座标比设定的范围要大" #~ msgid "%s%s on line %d" #~ msgstr "%3$d行里%1$s%2$s" #~ msgid "invalid input '%s' in mbcsToLatin1: omitted" #~ msgstr "mbcsToLatin1里'%s'输入不对，略过不用" #~ msgid "allocation failure in '%s'" #~ msgstr "'%s'里分配失败" #~ msgid "Object \"%s\" not found" #~ msgstr "找不到这个对象\"%s\"" #~ msgid "variable \"%s\" was not found" #~ msgstr "找不到\"%s\"这个变数" #~ msgid "object \"%s\" not found" #~ msgstr "找不到这个对象\"%s\"" #~ msgid "argument 'x' must be a integer vector" #~ msgstr "变元'x'必需是整数矢量" #~ msgid "unable to coerce .Random.seed to an integer vector" #~ msgstr "无法将.Random.seed强迫改成整数矢量" #~ msgid "symbol print-name too long" #~ msgstr "符号print-name太长了" #~ msgid "argument is not an atomic vector" #~ msgstr "变元不是基元矢量" #~ msgid "nothing to replace with" #~ msgstr "没有可以替换的东西：" #~ msgid "conversion from encoding '%s' is unsupported" #~ msgstr "不支持编码'%s'的转换" #~ msgid "conversion to encoding '%s' is unsupported" #~ msgstr "不支持转成'%s'编码" #~ msgid "cannot create fifo '%s'" #~ msgstr "无法建立先进先出'%s'" #~ msgid "cannot open pipe() cmd '%s'" #~ msgstr "无法打开pipe()命令'%s'" #~ msgid "cannot open compressed file '%s'" #~ msgstr "无法打开压缩文件'%s'" #~ msgid "cannot open bzip2-ed file '%s'" #~ msgstr "无法打开bzip2文件'%s'" #~ msgid "cannot create file '%s'" #~ msgstr "无法建立'%s'文件" #~ msgid "cannot symlink '%s' to '%s'" #~ msgstr "无法打开链结'%s'，原因是'%s'" #, fuzzy #~ msgid "cannot rename file '%s' to '%s'" #~ msgstr "无法将文件名字'%$s'改成'%$s'" #~ msgid "cannot create dir '%s'" #~ msgstr "无法建立'%s'文件目录" #~ msgid "cannot save data -- unable to open '%s'" #~ msgstr "无法保存数据 -- 无法打开'%s'" #~ msgid "cannot open destfile '%s'" #~ msgstr "无法打开destfile'%s'" #~ msgid "" #~ "Cannot open file '%s'\n" #~ "\n" #~ msgstr "无法打开文件'%s'\n" #~ msgid "nchar() requires a character vector" #~ msgstr "nchar()需要字符矢量" #~ msgid "polynomial degree too high (49 max)" #~ msgstr "多项式度数太高(最多只能是49)" #~ msgid "cannot obtain size for the null device" #~ msgstr "null设备没有大小" #~ msgid "EOF whilst reading MBCS char" #~ msgstr "读MBCS字节时遇到EOF" #~ msgid "unable to allocate space for source line %d" #~ msgstr "无法为%d行源代码分配内存" #~ msgid "unsupported conversion in 'filenameToWchar'" #~ msgstr "'filenameToWchar'里不支持这种转换" #~ msgid "'gamma' cannot be modified on this device" #~ msgstr "本设备上不能修改'gamma'的值" #, fuzzy #~ msgid "Unable to open file '%s': %s" #~ msgstr "无法打开文件'%s'" #~ msgid "unable to open connection" #~ msgstr "无法打开链结" #~ msgid "cannot open pipe() cmd '%s', reason '%s'" #~ msgstr "由于'%2$s'的原因无法打开pipe()命令'%1$s'" #~ msgid "file open failed" #~ msgstr "打开文件失败" #~ msgid "open failed on %s" #~ msgstr "打开%s失败" #~ msgid "" #~ "Cannot open file '%s', reason '%s'\n" #~ "\n" #~ msgstr "无法打开文件'%s'，原因是'%s'\n" #, fuzzy #~ msgid "unable to start device jpeg" #~ msgstr "无法打开%s设备" #, fuzzy #~ msgid "invalid '%s' value), " #~ msgstr "'%s'值不对" #~ msgid "invalid 'only.values'" #~ msgstr "'only.values'值不对" #~ msgid "invalid argument 'mode'" #~ msgstr "'mode'变元不对" #~ msgid "invalid 'byrow' value" #~ msgstr "'byrow'值不对" #~ msgid "invalid permutation ('perm')" #~ msgstr "permutation不对('perm')" #~ msgid "invalid value of 'n'" #~ msgstr "'n'的值不对" #~ msgid "invalid value of 'p'" #~ msgstr "'p'的值不对" #~ msgid "invalid value of 'na.rm'" #~ msgstr "'na.rm'的值不对" #~ msgid "invalid value of 'allow_'" #~ msgstr "'allow_'值不对" #~ msgid "invalid HSV color" #~ msgstr "HSV颜色不对" #, fuzzy #~ msgid "invalid value of '%s'" #~ msgstr "'%s'的值不对" #~ msgid "invalid value for 'which'" #~ msgstr "'which'的值不对" #~ msgid "invalid value for 'n'" #~ msgstr "'n'的值不对" #~ msgid "invalid 'n'" #~ msgstr "'n'值不对" #~ msgid "invalid 'headers'" #~ msgstr "'headers'不对" #~ msgid "invalid 'title'" #~ msgstr "'title'不对" #~ msgid "invalid value of 'what' argument" #~ msgstr "'what'变元的值不对" #~ msgid "invalid 'what' specified" #~ msgstr "'what'设定不对" #, fuzzy #~ msgid "invalid value of 'title' in devWindows" #~ msgstr "'signed'的值不对" #~ msgid "Invalid color" #~ msgstr "颜色不对" #~ msgid "cannot take snapshot of old-style device" #~ msgstr "无法取旧式设备快照" #~ msgid "cannot play snapshot on old-style device" #~ msgstr "无法在旧式设备上显示快照" #~ msgid "invalid graphics parameter list" #~ msgstr "图形参数串列不对" #, fuzzy #~ msgid "cannot coerce type '%s' to vector of type '%s'" #~ msgstr "不能把%s种类强制改变成%s矢量" #, fuzzy #~ msgid "cannot type '%s' coerce to vector" #~ msgstr "无法强制改变成矢量" #~ msgid "invalid multibyte string" #~ msgstr "多字节字符串不对" #~ msgid "invalid input in 'mbcsToLatin1'" #~ msgstr "'mbcsToLatin1'里的输入不对" #~ msgid " " #~ msgstr "<错误: 编码里的输入不对> " #~ msgid "'loadRconsole' can only be used in Rgui" #~ msgstr "’loadRconsole’只能在Rgui里有用" #, fuzzy #~ msgid "allocation failure in R_GE_VText" #~ msgstr "分配GVText失败" #~ msgid "use of agrep() in a UTF-8 locale may only work for ASCII strings" #~ msgstr "在UTF-8语言环境下agrep()只能对ASCII字符串适用" #~ msgid "allocation failure in 'mbcsToLatin1'" #~ msgstr "分配'mbcsToLatin1'里出了错" #~ msgid "allocation failure in GVStrWidth" #~ msgstr "分配GVStrWidth失败" #~ msgid "allocation failure in GVStrHeight" #~ msgstr "分配GVStrHeight失败" #~ msgid "\\Uxxxxxxxx sequences are not supported on Windows" #~ msgstr "Windows不支持\\Uxxxxxxxx这样的序列" #~ msgid "\\Uxxxxxxxx sequences are only valid in multibyte locales" #~ msgstr "\\Uxxxxxxxx这样的序列只在多字节的地点有用" #~ msgid "element %d is empty" #~ msgstr "%d 元素是空的" #~ msgid "failed to find symbols in iconv.dll" #~ msgstr "iconv.dll里找不到符号" #~ msgid "iconv.dll is not available on this system" #~ msgstr "本系统没有iconv.dll这个功能" #~ msgid "approx(): invalid f value" #~ msgstr "approx(): f值不对" #~ msgid "approx(): invalid interpolation method" #~ msgstr "approx(): 内插值方法不对" #~ msgid "approx(): attempted to interpolate NA values" #~ msgstr "approx(): 无法内插NA值" #~ msgid "recursive default argument reference" #~ msgstr "缺省变元引用不能有递回" #~ msgid "String length exceeds buffer size of %d" #~ msgstr "字符串长度超过了缓冲区的大小%d" #~ msgid "could not allocate memory in C function 'R_AllocStringBuffer'" #~ msgstr "无法为read.dcf分配内存" #~ msgid "cannot allocate memory block of size %0.1f Mb" #~ msgstr "无法分配大小为%0.1f Mb的内存块" #~ msgid "cannot allocate memory block of size %0.1f Kb" #~ msgstr "无法分配大小为%0.1f的内存块" #~ msgid "cannot allocate memory block of size %.0f" #~ msgstr "无法分配大小为%.0f的内存块" #~ msgid "out of memory" #~ msgstr "内存用完了" #~ msgid "incorrect number of arguments to 'row/col'" #~ msgstr "'row/col'的变元数目不对" #~ msgid "remove: variable \"%s\" was not found" #~ msgstr "remove: 找不到\"%s\"这个变数" #~ msgid "invalid number of copies in rep.int()" #~ msgstr "rep.int()里的拷贝数目不对" #~ msgid "invalid 'names' in 'R_unlink'" #~ msgstr "'R_unlink'里的'names'不对" #~ msgid "" #~ "longer object length\n" #~ "\tis not a multiple of shorter object length" #~ msgstr "长对象之长度不是短对象之长度的整倍" #~ msgid "dim<- : invalid first argument" #~ msgstr "dim<-: 第一变元有错" #~ msgid "dim<- : invalid second argument" #~ msgstr "dim<-: 第二变元有错" #~ msgid "invalid slot type" #~ msgstr "槽的种类不对" #~ msgid "length<- invalid first argument" #~ msgstr "length<- 第一个变元不适当" #~ msgid "length<- invalid second argument" #~ msgstr "length<- 第二个变元不适当" #~ msgid "invalid substring argument(s) in substr()" #~ msgstr "substr()里的子字串变元不对" #~ msgid "invalid substring argument(s) in substr<-()" #~ msgstr " substr<-()子字串变元不对" #~ msgid "invalid right-hand side in substr<-()" #~ msgstr "substr<-()函数右手有错" #~ msgid "non-character argument in strsplit()" #~ msgstr "strsplit()不能用于非字符变元" #~ msgid "non-character argument to tolower()" #~ msgstr "非字符变元不能用于tolower()" #~ msgid "open/close not enabled for this connection" #~ msgstr "开/关不适用于此链结" #~ msgid "getc not enabled for this connection" #~ msgstr "getc不适用于此链结" #~ msgid "read not enabled for this connection" #~ msgstr "不能读取这个链结" #~ msgid "'%s' is deprecated" #~ msgstr "'%s'不再有用" #~ msgid "'\\%%%%' is an unrecognized escape in a character string" #~ msgstr "不认识字符串里'\\%%%%'这样的逸出号" #~ msgid "file.info() is not implemented on this system" #~ msgstr "本系统还没有实现file.info()" #~ msgid "'recursive = TRUE' is not supported on this platform" #~ msgstr "本平台不支持'recursive=TRUE'" #~ msgid "invalid subscript" #~ msgstr "下标不对" #~ msgid "file existence is not available on this system" #~ msgstr "本系统没有检查文件是否存在这一功能" #~ msgid "file modification time is not available on this system" #~ msgstr "本系统没有检查文件修改时间这一功能" #~ msgid "'Sys.putenv' is not available on this system" #~ msgstr "本系统没有'Sys.putenv'这个功能" #~ msgid "invalid 'f' argument" #~ msgstr "'f'变元不对" #~ msgid "invalid 'classes' argument" #~ msgstr "'classes'变元不对" #~ msgid "'%s' is not a valid call" #~ msgstr "'%s'调用不对" #~ msgid "'%s' is not a function" #~ msgstr "'%s'不是函数" #~ msgid "'%s' is not a logical" #~ msgstr "'%s'不是逻辑值" #~ msgid "unknown URL scheme" #~ msgstr "没有这种URL格式" #~ msgid "incorrect number of args to 'length'" #~ msgstr "'length'的变元数目不对" #~ msgid "using .GlobalEnv instead of '%s'" #~ msgstr "用.GlobalEnv而不用'%s'" #~ msgid "namespaces not available; using .GlobalEnv" #~ msgstr "名字空间没用; 用.GlobalEnv" #~ msgid "too many devices open" #~ msgstr "太多已经打开了的设备" #~ msgid "ReadItem: unknown type %i" #~ msgstr "ReadItem不对：没有这一种类%i" #~ msgid "syntax error" #~ msgstr "语法错误" #~ msgid "syntax error in \"%s\"" #~ msgstr "\"%s\"里有语法错误" #~ msgid "WARNING: no 'vsize' given\n" #~ msgstr "警告: 没有设定'vsize'的值\n" #~ msgid "WARNING: '--vsize' value is invalid: ignored\n" #~ msgstr "警告: '--vsize'的值不对: 略过不用\n" #~ msgid "WARNING: --vsize=%ld'%c': too large and ignored\n" #~ msgstr "警告: --vsize=%ld'%c': 太大，略过不用\n" #~ msgid "WARNING: no 'nsize' given\n" #~ msgstr "警告: 没有设定'nsize'的值\n" #~ msgid "WARNING: '--nsize' value is invalid: ignored\n" #~ msgstr "警告: '--nsize'的值不对: 略过不用\n" #~ msgid "WARNING: --nsize=%lu'%c': too large and ignored\n" #~ msgstr "警告: --nsize=%lu'%c': 太大，略过不用\n" #~ msgid "supplied length is invalid" #~ msgstr "长度不对" #~ msgid "the first argument must be a string" #~ msgstr "第一变元必需是字符串" #~ msgid "unprotect(): stack imbalance" #~ msgstr "unprotect(): 堆叠不平衡" #~ msgid "first argument ('table') not of type VECSXP, from R_HashResize" #~ msgstr "R_HashResize第一个变元('table') 不是VECSXP种类" #~ msgid "first argument ('table') not of type VECSXP, R_HashSizeCheck" #~ msgstr "R_HashSizeCheck第一个变元('table') 不是VECSXP种类" #~ msgid "first argument ('table') not of type ENVSXP, from R_HashVector2Hash" #~ msgstr "R_HashVector2Hash第一个变元('table') 不是ENVSXP种类" #~ msgid "cannot get binding from base environment" #~ msgstr "无法从基本环境里取得联编" #~ msgid "cannot get binding from base namespace" #~ msgstr "无法从基本名字空间取得联编" #~ msgid "locking the base environment is not supported yet" #~ msgstr "目前还不支持对基本环境进行锁定这功能" #~ msgid "invalid variable type for '%s'" #~ msgstr "'%s'变数种类不对" #~ msgid "invalid variable type" #~ msgstr "变数种类不对" #~ msgid "invalid value of 'which'" #~ msgstr "'which'的值不对" #~ msgid "invalid first argument to remove()" #~ msgstr "remove()的第一个变元不对" #~ msgid "wrong length for 'ifnotfound' argument" #~ msgstr "'ifnotfound'变元的长度不对" #~ msgid "attach: invalid object name" #~ msgstr "attach: 对象名字不对" #~ msgid "invalid value for 'ok'" #~ msgstr "'ok'的值不对" #~ msgid "invalid value of 'what'" #~ msgstr "'what'的值不对" #~ msgid "invalid value of 'swap'" #~ msgstr "'swap'的值不对" #~ msgid "invalid value of 'sep'" #~ msgstr "'sep'的值不对" #~ msgid "invalid value for 'closeOnExit'" #~ msgstr "'closeOnExit'的值不对" #~ msgid "invalid value for 'type'" #~ msgstr "'type'的值不对" #~ msgid "invalid value for 'split'" #~ msgstr "'split'的值不对" #~ msgid "" #~ "graphical parameter \"%s\" can not be set in high-level plot() function" #~ msgstr "高层次plot()函数里不能设定图形参数\"%s\"" #~ msgid "R_compress1 requires a scalar string" #~ msgstr "R_compress1需要纯量字符串" #~ msgid "not a proper string" #~ msgstr "字符串有错" #~ msgid "type %d is unimplemented in type2symbol" #~ msgstr "type2symbol目前没有实现种类%d" #~ msgid "do.call: could not find parent environment" #~ msgstr "do.call: 找不到上代环境" #~ msgid "argument must be a character vector" #~ msgstr "变元必需为字符矢量" #~ msgid "" #~ "trying to get slot \"%s\" from an object with S3 class c(\"%s\", \"%s" #~ "\", ...) (not a formally defined class)" #~ msgstr "无法从S3类别c(\"%2$s\", \"%3$s\", ...)对象中取得\"%1$s\"槽" #~ msgid "'B' must be a complex matrix" #~ msgstr "'B'必需是复数矩阵" #~ msgid "'B' must be a numeric matrix" #~ msgstr "'B'必需是数值矩阵"