# Traditional Chinese translations for R. # Copyright (C) 2005, 06 The R Foundation # This file is distributed under the same license as the R package. # 陈斐 , 2005. # Wei-Lun Chao , 2005, 06. # msgid "" msgstr "" "Project-Id-Version: R 2.3.0\n" "Report-Msgid-Bugs-To: bugs@R-project.org\n" "POT-Creation-Date: 2011-04-18 10:27+0100\n" "PO-Revision-Date: 2006-04-14 22:49+0800\n" "Last-Translator: Wei-Lun Chao \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: src/appl/binning.c:73 msgid "NA's in .C(\"bincode\",... NAOK=FALSE)" msgstr ".C(\"bincode\",... NAOK=FALSE) 中有 NA 值" #: src/appl/binning.c:111 msgid "NA's in .C(\"bincount\",... NAOK=FALSE)" msgstr ".C(\"bincount\",... NAOK=FALSE) 有 NA 值" #: src/appl/pretty.c:106 msgid "Internal(pretty()): very small range.. corrected" msgstr "內部(pretty()): 範圍太小.. 已修正" #: src/appl/pretty.c:109 msgid "Internal(pretty()): very large range.. corrected" msgstr "內部(pretty()): 範圍太大.. 已修正" #: src/appl/rcont.c:78 #, c-format msgid "rcont2 [%d,%d]: exp underflow to 0; algorithm failure" msgstr "rcont2 [%d,%d]: exp 向下溢位到 0; 演算法失敗" #: src/appl/strsignif.c:120 msgid ".C(..): Width cannot be zero" msgstr ".C(..): 寬度不能為零" #: src/appl/strsignif.c:134 msgid ".C(..): 'type' must be \"integer\" for \"d\"-format" msgstr ".C(..):「type」如果用於 \"d\"-格式的話必須為 \"integer\"" #: src/appl/strsignif.c:217 msgid ".C(..): 'type' must be \"real\" for this format" msgstr ".C(..):「type」用於這種格式的話必須為 \"real\"" #: src/gnuwin32/dynload.c:155 #, c-format msgid "DLL attempted to change FPU control word from %x to %x" msgstr "DLL 試圖把 FPU 控制詞從 %x 改成 %x" #: src/gnuwin32/dynload.c:196 msgid "cannot get working directory" msgstr "找不到工作目錄" #: src/gnuwin32/extra.c:65 src/gnuwin32/extra.c:606 #, fuzzy msgid "unsupported version of Windows" msgstr "不支援這種轉換" #: src/gnuwin32/extra.c:130 src/gnuwin32/extra.c:158 src/gnuwin32/extra.c:197 msgid "R_HOME not set" msgstr "沒有設定 R_HOME" #: src/gnuwin32/extra.c:137 #, fuzzy, c-format msgid "'%s' not found" msgstr "沒找到" #: src/gnuwin32/extra.c:139 #, fuzzy, c-format msgid "file association for '%s' not available or invalid" msgstr "本系統沒有檢查檔案修改時間此一功能" #: src/gnuwin32/extra.c:142 #, c-format msgid "access to '%s' denied" msgstr "" #: src/gnuwin32/extra.c:143 #, c-format msgid "problem in displaying '%s'" msgstr "" #: src/gnuwin32/extra.c:168 #, fuzzy, c-format msgid "'%ls' not found" msgstr "沒找到" #: src/gnuwin32/extra.c:170 #, fuzzy, c-format msgid "file association for '%ls' not available or invalid" msgstr "本系統沒有檢查檔案修改時間此一功能" #: src/gnuwin32/extra.c:173 #, c-format msgid "access to '%ls' denied" msgstr "" #: src/gnuwin32/extra.c:174 #, c-format msgid "problem in displaying '%ls'" msgstr "" #: src/gnuwin32/extra.c:185 src/gnuwin32/extra.c:216 src/gnuwin32/extra.c:241 #: src/gnuwin32/extra.c:244 src/gnuwin32/extra.c:290 src/gnuwin32/extra.c:327 #: src/gnuwin32/extra.c:338 src/gnuwin32/extra.c:362 src/gnuwin32/extra.c:370 #: src/gnuwin32/extra.c:525 src/gnuwin32/extra.c:545 src/gnuwin32/extra.c:585 #: src/gnuwin32/extra.c:770 src/gnuwin32/extra.c:854 src/gnuwin32/extra.c:857 #: src/gnuwin32/extra.c:862 src/gnuwin32/extra.c:1654 #: src/gnuwin32/extra.c:1679 src/main/agrep.c:67 src/main/agrep.c:70 #: src/main/apply.c:278 src/main/apply.c:280 src/main/apply.c:283 #: src/main/array.c:86 src/main/array.c:1100 src/main/array.c:1232 #: src/main/array.c:1234 src/main/array.c:1235 src/main/attrib.c:192 #: src/main/builtin.c:77 src/main/builtin.c:86 src/main/builtin.c:105 #: src/main/builtin.c:107 src/main/builtin.c:136 src/main/builtin.c:524 #: src/main/builtin.c:540 src/main/builtin.c:724 src/main/character.c:130 #: src/main/character.c:133 src/main/character.c:194 src/main/character.c:1019 #: src/main/character.c:1023 src/main/character.c:1254 #: src/main/character.c:1258 src/main/character.c:1315 #: src/main/character.c:1318 src/main/connections.c:986 #: src/main/connections.c:992 src/main/connections.c:995 #: src/main/connections.c:999 src/main/connections.c:1138 #: src/main/connections.c:1154 src/main/connections.c:1159 #: src/main/connections.c:1753 src/main/connections.c:1759 #: src/main/connections.c:1763 src/main/connections.c:1767 #: src/main/connections.c:1772 src/main/connections.c:2420 #: src/main/connections.c:2425 src/main/connections.c:2428 #: src/main/connections.c:2431 src/main/connections.c:2797 #: src/main/connections.c:2802 src/main/connections.c:2808 #: src/main/connections.c:2811 src/main/connections.c:2815 #: src/main/connections.c:2830 src/main/connections.c:2881 #: src/main/connections.c:2886 src/main/connections.c:2890 #: src/main/connections.c:2894 src/main/connections.c:2898 #: src/main/connections.c:2904 src/main/connections.c:2950 #: src/main/connections.c:2956 src/main/connections.c:2960 #: src/main/connections.c:3011 src/main/connections.c:3014 #: src/main/connections.c:3280 src/main/connections.c:3283 #: src/main/connections.c:3286 src/main/connections.c:3384 #: src/main/connections.c:3390 src/main/connections.c:3393 #: src/main/connections.c:3543 src/main/connections.c:3546 #: src/main/connections.c:3550 src/main/connections.c:3553 #: src/main/connections.c:3660 src/main/connections.c:3763 #: src/main/connections.c:3766 src/main/connections.c:4102 #: src/main/connections.c:4127 src/main/connections.c:4160 #: src/main/connections.c:4174 src/main/connections.c:4182 #: src/main/connections.c:4208 src/main/connections.c:4349 #: src/main/connections.c:4353 src/main/connections.c:4479 #: src/main/connections.c:4481 src/main/connections.c:4483 #: src/main/connections.c:4511 src/main/connections.c:4641 #: src/main/connections.c:4667 src/main/connections.c:4671 #: src/main/connections.c:4675 src/main/connections.c:4679 #: src/main/context.c:597 src/main/context.c:606 src/main/context.c:610 #: src/main/datetime.c:660 src/main/datetime.c:740 src/main/datetime.c:742 #: src/main/datetime.c:746 src/main/datetime.c:903 src/main/datetime.c:905 #: src/main/datetime.c:1069 src/main/debug.c:223 src/main/deparse.c:360 #: src/main/devices.c:583 src/main/dotcode.c:736 src/main/dotcode.c:740 #: src/main/dotcode.c:745 src/main/dounzip.c:260 src/main/dounzip.c:267 #: src/main/dounzip.c:277 src/main/dounzip.c:282 src/main/dounzip.c:286 #: src/main/envir.c:1526 src/main/envir.c:1529 src/main/envir.c:1646 #: src/main/envir.c:1651 src/main/envir.c:1717 src/main/envir.c:1733 #: src/main/envir.c:1739 src/main/envir.c:1839 src/main/envir.c:1847 #: src/main/envir.c:1854 src/main/envir.c:1868 src/main/envir.c:1874 #: src/main/envir.c:1878 src/main/envir.c:2095 src/main/envir.c:2216 #: src/main/envir.c:2475 src/main/envir.c:2733 src/main/envir.c:2747 #: src/main/envir.c:2754 src/main/envir.c:2770 src/main/envir.c:3333 #: src/main/errors.c:937 src/main/eval.c:281 src/main/eval.c:2039 #: src/main/eval.c:2068 src/main/eval.c:2072 src/main/grep.c:758 #: src/main/grep.c:763 src/main/grep.c:1037 src/main/grep.c:1039 #: src/main/grep.c:1041 src/main/grep.c:1485 src/main/grep.c:1489 #: src/main/grep.c:1494 src/main/grep.c:2171 src/main/grep.c:2176 #: src/main/memory.c:3338 src/main/model.c:1610 src/main/model.c:1618 #: src/main/optim.c:225 src/main/paste.c:87 src/main/paste.c:368 #: src/main/paste.c:375 src/main/paste.c:382 src/main/paste.c:387 #: src/main/paste.c:392 src/main/paste.c:397 src/main/paste.c:400 #: src/main/paste.c:408 src/main/paste.c:574 src/main/paste.c:579 #: src/main/platform.c:298 src/main/platform.c:300 src/main/platform.c:302 #: src/main/platform.c:318 src/main/platform.c:329 src/main/platform.c:454 #: src/main/platform.c:456 src/main/platform.c:731 src/main/platform.c:733 #: src/main/platform.c:1061 src/main/platform.c:1067 src/main/platform.c:1070 #: src/main/platform.c:1073 src/main/platform.c:1076 src/main/platform.c:1079 #: src/main/platform.c:1082 src/main/platform.c:1169 src/main/platform.c:1208 #: src/main/platform.c:1265 src/main/platform.c:1268 src/main/platform.c:1421 #: src/main/platform.c:1424 src/main/platform.c:1460 src/main/platform.c:1463 #: src/main/platform.c:1546 src/main/platform.c:1562 src/main/platform.c:1603 #: src/main/platform.c:1605 src/main/platform.c:1665 src/main/platform.c:1756 #: src/main/platform.c:2016 src/main/platform.c:2059 src/main/platform.c:2186 #: src/main/platform.c:2189 src/main/platform.c:2192 src/main/platform.c:2195 #: src/main/platform.c:2198 src/main/platform.c:2331 src/main/platform.c:2334 #: src/main/platform.c:2337 src/main/platform.c:2340 src/main/platform.c:2343 #: src/main/platform.c:2412 src/main/platform.c:2420 src/main/platform.c:2456 #: src/main/platform.c:2506 src/main/plot.c:3104 src/main/plot.c:4241 #: src/main/plot.c:4245 src/main/plot.c:4248 src/main/plot3d.c:2434 #: src/main/plot3d.c:2438 src/main/plot3d.c:2443 src/main/plot3d.c:2447 #: src/main/plot3d.c:2451 src/main/plot3d.c:2455 src/main/print.c:231 #: src/main/print.c:237 src/main/print.c:259 src/main/print.c:265 #: src/main/print.c:271 src/main/random.c:468 src/main/random.c:472 #: src/main/random.c:476 src/main/saveload.c:1938 src/main/saveload.c:1941 #: src/main/saveload.c:1944 src/main/saveload.c:2060 src/main/saveload.c:2240 #: src/main/saveload.c:2245 src/main/saveload.c:2248 src/main/saveload.c:2351 #: src/main/scan.c:663 src/main/scan.c:830 src/main/scan.c:843 #: src/main/scan.c:847 src/main/scan.c:849 src/main/scan.c:860 #: src/main/scan.c:887 src/main/scan.c:890 src/main/scan.c:943 #: src/main/scan.c:980 src/main/scan.c:984 src/main/scan.c:994 #: src/main/scan.c:1208 src/main/scan.c:1434 src/main/scan.c:1485 #: src/main/scan.c:1497 src/main/scan.c:1501 src/main/scan.c:1507 #: src/main/scan.c:1721 src/main/scan.c:1722 src/main/scan.c:1724 #: src/main/scan.c:1725 src/main/scan.c:1726 src/main/scan.c:1727 #: src/main/scan.c:1728 src/main/scan.c:1729 src/main/seq.c:381 #: src/main/seq.c:388 src/main/seq.c:408 src/main/seq.c:412 src/main/seq.c:418 #: src/main/seq.c:426 src/main/sort.c:161 src/main/sysutils.c:589 #: src/main/sysutils.c:591 src/main/sysutils.c:593 src/main/sysutils.c:598 #: src/main/sysutils.c:1589 src/main/sysutils.c:1593 src/main/unique.c:821 #: src/main/unique.c:1100 src/main/unique.c:1160 src/main/unique.c:1167 #: src/main/util.c:574 src/main/util.c:577 src/main/util.c:1758 #: src/modules/internet/internet.c:283 src/modules/internet/internet.c:289 #: src/modules/internet/internet.c:295 src/modules/internet/internet.c:298 #: src/modules/internet/internet.c:302 src/modules/lapack/Lapack.c:151 #: src/modules/lapack/Lapack.c:241 src/modules/lapack/Lapack.c:666 #: src/modules/lapack/Lapack.c:762 src/modules/lapack/Lapack.c:819 #: src/modules/lapack/Lapack.c:1077 src/modules/X11/devX11.c:2915 #: src/modules/X11/devX11.c:2918 src/modules/X11/devX11.c:2921 #: src/modules/X11/devX11.c:2946 src/modules/X11/devX11.c:3317 #: src/modules/X11/devX11.c:3322 src/modules/X11/devX11.c:3326 #: src/modules/X11/devX11.c:3330 src/modules/X11/devX11.c:3334 #: src/modules/X11/devX11.c:3345 src/modules/X11/devX11.c:3349 #: src/unix/sys-std.c:1203 src/unix/sys-std.c:1226 #, c-format msgid "invalid '%s' argument" msgstr "'%s' 引數不正確" #: src/gnuwin32/extra.c:228 msgid "unknown type" msgstr "不明的類型" #: src/gnuwin32/extra.c:262 src/gnuwin32/extra.c:286 src/gnuwin32/extra.c:324 #: src/gnuwin32/extra.c:359 msgid "Menu functions can only be used in the GUI" msgstr "選單功能只能在 GUI 中使用" #: src/gnuwin32/extra.c:294 #, c-format msgid "unable to retrieve items for %s (%s)" msgstr "無法檢索項目 %s (%s)" #: src/gnuwin32/extra.c:332 #, c-format msgid "unable to add menu (%s)" msgstr "無法增加選單 (%s)" #: src/gnuwin32/extra.c:344 #, c-format msgid "unable to add menu item (%s)" msgstr "無法加入選單項 (%s)" #: src/gnuwin32/extra.c:367 msgid "menu does not exist" msgstr "選單不存在" #: src/gnuwin32/extra.c:374 #, c-format msgid "unable to delete menu item (%s)" msgstr "無法刪除選單項 (%s)" #: src/gnuwin32/extra.c:534 msgid "'savehistory' can only be used in Rgui and Rterm" msgstr "'savehistory' 只能在 Rgui 和 Rterm 中使用" #: src/gnuwin32/extra.c:551 msgid "'loadhistory' can only be used in Rgui and Rterm" msgstr "'loadhistory' 只能在 Rgui 和 Rterm 中使用" #: src/gnuwin32/extra.c:564 src/unix/sys-std.c:1257 msgid "invalid timestamp" msgstr "時間截記不正確" #: src/gnuwin32/extra.c:687 src/gnuwin32/extra.c:1870 #: src/gnuwin32/extra.c:2051 src/gnuwin32/extra.c:2054 #: src/gnuwin32/extra.c:2057 src/main/character.c:578 src/main/colors.c:358 #: src/main/connections.c:3288 src/main/context.c:643 src/main/context.c:662 #: src/main/datetime.c:592 src/main/datetime.c:662 src/main/datetime.c:907 #: src/main/dotcode.c:197 src/main/errors.c:838 src/main/errors.c:869 #: src/main/errors.c:970 src/main/errors.c:995 src/main/errors.c:1000 #: src/main/optimize.c:95 src/main/optimize.c:102 src/main/optimize.c:111 #: src/main/optimize.c:184 src/main/optimize.c:190 src/main/optimize.c:199 #: src/main/plot.c:276 src/main/plot.c:470 src/main/plot.c:475 #: src/main/plot.c:2278 src/main/plot.c:2285 src/main/plot.c:3317 #: src/main/plot.c:3319 src/main/plot.c:3321 src/main/plot.c:3479 #: src/main/plot3d.c:1381 src/main/plot3d.c:2512 src/main/plot3d.c:2516 #: src/main/plot3d.c:2518 src/main/seq.c:167 src/main/seq.c:265 #: src/main/seq.c:268 src/main/sort.c:871 src/main/sort.c:970 #: src/main/source.c:215 src/main/summary.c:1028 src/main/sysutils.c:248 #: src/main/util.c:955 src/main/util.c:960 src/main/util.c:967 #: src/main/util.c:970 src/modules/X11/devX11.c:2821 #: src/modules/X11/devX11.c:2848 src/modules/X11/devX11.c:2853 #: src/modules/X11/devX11.c:2858 src/modules/X11/devX11.c:2868 #: src/modules/X11/devX11.c:2873 src/modules/X11/devX11.c:2877 #: src/modules/X11/devX11.c:3338 src/unix/sys-std.c:1304 #, c-format msgid "invalid '%s' value" msgstr "'%s' 值不正確" #: src/gnuwin32/extra.c:729 src/gnuwin32/extra.c:742 msgid "incorrect argument" msgstr "引數不正確" #: src/gnuwin32/extra.c:733 msgid "don't be silly!: your machine has a 4Gb address limit" msgstr "別傻了!: 您的機器有 4Gb 的位址上限" #: src/gnuwin32/extra.c:737 #, fuzzy msgid "cannot decrease memory limit: ignored" msgstr "無法減少記憶體限制" #: src/gnuwin32/extra.c:884 #, fuzzy msgid "Select one or more" msgstr "選擇: " #: src/gnuwin32/extra.c:884 #, fuzzy msgid "Select one" msgstr "選擇: " #: src/gnuwin32/extra.c:1071 msgid "argument must be a character vector or a raw vector" msgstr "引數必須是字元向量或純量向量" #: src/gnuwin32/extra.c:1108 src/main/connections.c:1931 msgid "Unable to open the clipboard" msgstr "無法開啟剪貼簿" #: src/gnuwin32/extra.c:1113 src/main/connections.c:1935 msgid "Unable to write to the clipboard" msgstr "無法寫入剪貼簿" #: src/gnuwin32/extra.c:1137 src/gnuwin32/extra.c:1238 src/main/util.c:885 msgid "'path' must be a character vector" msgstr "'path' 必須是字元向量" #: src/gnuwin32/extra.c:1298 src/gnuwin32/extra.c:1371 msgid "'default' must be a character string" msgstr "'default' 必須為字串" #: src/gnuwin32/extra.c:1300 src/gnuwin32/extra.c:1373 msgid "'default' is overlong" msgstr "'default' 太長" #: src/gnuwin32/extra.c:1304 src/gnuwin32/extra.c:1377 msgid "'caption' must be a character string" msgstr "'caption' 必須為字串" #: src/gnuwin32/extra.c:1306 msgid "'multi' must be a logical value" msgstr "'multi' 必須為邏輯值" #: src/gnuwin32/extra.c:1308 msgid "'filterindex' must be an integer value" msgstr "'filterindex' 必須為整數" #: src/gnuwin32/extra.c:1459 msgid "'title' must be a character string" msgstr "'title' 必須為字串" #: src/gnuwin32/extra.c:1476 #, fuzzy msgid "'text' must be a character string" msgstr "'title' 必須為字串" #: src/gnuwin32/extra.c:1506 #, fuzzy, c-format msgid "'%s' must be length 1" msgstr "'which' 的長度必須為 1" #: src/gnuwin32/extra.c:1620 #, fuzzy, c-format msgid "'%s' must be a list" msgstr "'dimnames' 必須是串列" #: src/gnuwin32/extra.c:1624 #, fuzzy, c-format msgid "'%s' element %d is not a window handle" msgstr "'%s' 呼叫不正確" #: src/gnuwin32/extra.c:1656 src/gnuwin32/extra.c:1658 #: src/gnuwin32/extra.c:1681 src/gnuwin32/extra.c:1683 #: src/gnuwin32/extra.c:1730 src/main/gevents.c:59 src/main/gevents.c:96 msgid "invalid device" msgstr "裝置無效" #: src/gnuwin32/extra.c:1659 msgid "requires SDI mode" msgstr "需要用 SDI 模式" #: src/gnuwin32/extra.c:1724 src/main/gevents.c:56 src/main/gevents.c:93 msgid "invalid graphical device number" msgstr "繪圖裝置號碼無效" #: src/gnuwin32/extra.c:1734 msgid "bad device" msgstr "裝置不當" #: src/gnuwin32/extra.c:2069 #, fuzzy, c-format msgid "Registry key '%ls' not found" msgstr "找不到目的物件 '%s'" #: src/gnuwin32/extra.c:2133 src/gnuwin32/extra.c:2141 msgid "invalid input in Rmbstowcs" msgstr "Rmbstowcs 中的輸入無效" #: src/gnuwin32/extra.c:2163 src/main/platform.c:1240 msgid "file choice cancelled" msgstr "取消檔案選擇" #: src/gnuwin32/run.c:231 #, fuzzy, c-format msgid "CreateProcess failed to run '%s'" msgstr "讀取 %s 失敗" #: src/gnuwin32/run.c:327 msgid "Child process not responding. R will terminate it." msgstr "" #: src/gnuwin32/run.c:385 #, c-format msgid "Exit code was %d" msgstr "" #: src/gnuwin32/run.c:414 msgid "Insufficient memory (rpipeOpen)" msgstr "沒有足夠的記憶體 (rpipeOpen)" #: src/gnuwin32/run.c:628 src/main/dounzip.c:415 msgid "seek not enabled for this connection" msgstr "這個連結上不能使用搜索" #: src/gnuwin32/run.c:634 msgid "truncate not enabled for this connection" msgstr "這個連結不能使用截短" #: src/gnuwin32/run.c:714 src/gnuwin32/run.c:718 src/gnuwin32/run.c:731 #: src/gnuwin32/run.c:759 src/main/connections.c:1093 #: src/main/connections.c:1097 src/main/connections.c:1103 #: src/main/connections.c:1117 msgid "allocation of pipe connection failed" msgstr "管道連結指派失敗" #: src/gnuwin32/run.c:773 #, fuzzy msgid "'names' is not a character string" msgstr "'msg1' 必須是字串" #: src/gnuwin32/sys-win32.c:183 msgid "character string expected as first argument" msgstr "第一個引數應當是字串" #: src/gnuwin32/sys-win32.c:192 msgid "character string expected as third argument" msgstr "第三個引數應當是字串" #: src/gnuwin32/sys-win32.c:254 src/unix/sys-unix.c:313 #, c-format msgid "running command '%s' had status %d" msgstr "" #: src/gnuwin32/system.c:121 src/unix/sys-unix.c:415 msgid "reached session elapsed time limit" msgstr "" #: src/gnuwin32/system.c:123 src/unix/sys-unix.c:417 msgid "reached elapsed time limit" msgstr "" #: src/gnuwin32/system.c:129 src/unix/sys-unix.c:423 msgid "reached session CPU time limit" msgstr "" #: src/gnuwin32/system.c:131 src/unix/sys-unix.c:425 msgid "reached CPU time limit" msgstr "" #: src/gnuwin32/system.c:151 #, c-format msgid "Fatal error: %s\n" msgstr "嚴重錯誤：%s\n" #: src/gnuwin32/system.c:329 src/unix/sys-std.c:853 #, c-format msgid "encoding '%s' is not recognised" msgstr "編碼 '%s' 無法確認" #: src/gnuwin32/system.c:335 src/unix/sys-std.c:859 #, fuzzy, c-format msgid "\n" msgstr "<錯誤: 編碼中的輸入不正確> " #: src/gnuwin32/system.c:546 src/gnuwin32/system.c:1025 #: src/gnuwin32/system.c:1037 src/main/connections.c:579 #: src/main/connections.c:584 src/main/dounzip.c:124 src/main/saveload.c:1949 #: src/main/serialize.c:2202 src/main/serialize.c:2207 #: src/main/serialize.c:2288 src/main/serialize.c:2333 src/unix/system.c:312 #: src/unix/system.c:323 #, fuzzy, c-format msgid "cannot open file '%s': %s" msgstr "無法開啟檔案 '%s'" #: src/gnuwin32/system.c:560 #, c-format msgid "file.show(): file '%s' does not exist\n" msgstr "file.show(): 檔案 '%s' 不存在\n" #: src/gnuwin32/system.c:988 msgid "WARNING: no max-mem-size given\n" msgstr "警告: max-mem-size 沒有定義\n" #: src/gnuwin32/system.c:994 #, c-format msgid "WARNING: --max-mem-size value is invalid: ignored\n" msgstr "警告: --max-mem-size 值不正確: 忽略不用\n" #: src/gnuwin32/system.c:996 #, fuzzy, c-format msgid "WARNING: --max-mem-size=%lu%c: too large and ignored\n" msgstr "警告: --max-mem-size=%lu'%c': 太大，忽略不用\n" #: src/gnuwin32/system.c:1001 #, fuzzy, c-format msgid "WARNING: --max-mem-size=%4.1fM: too small and ignored\n" msgstr "警告: max-mem-size=%4.1fM 太小，忽略不用\n" #: src/gnuwin32/system.c:1005 #, fuzzy, c-format msgid "WARNING: --max-mem-size=%4.0fM: too large and taken as %uM\n" msgstr "警告: max-mem-size=%4.1fM 太大，視為 3Gb\n" #: src/gnuwin32/system.c:1048 src/unix/system.c:342 #, c-format msgid "WARNING: '-e %s' omitted as input is too long\n" msgstr "" #: src/gnuwin32/system.c:1052 src/unix/system.c:356 #, c-format msgid "WARNING: unknown option '%s'\n" msgstr "警告: 沒有 '%s' 這樣的選項\n" #: src/gnuwin32/system.c:1074 src/unix/system.c:360 #, c-format msgid "ARGUMENT '%s' __ignored__\n" msgstr "引數「%s」忽略不用\n" #: src/gnuwin32/system.c:1080 src/unix/system.c:367 #, fuzzy msgid "cannot use -e with -f or --file" msgstr "不能設定非向量的長度" #: src/gnuwin32/system.c:1100 msgid "creation of tmpfile failed -- set TMPDIR suitably?" msgstr "" #: src/gnuwin32/system.c:1119 src/unix/system.c:417 msgid "you must specify '--save', '--no-save' or '--vanilla'" msgstr "您必須指定 '--save'、'--no-save' 或 '--vanilla' 其中的一個" #: src/gnuwin32/system.c:1124 msgid "" "impossible to create 'reader thread'; you must free some system resources" msgstr "無法建立「reader thread」；您必須釋放一些系統資源" #: src/include/Errormsg.h:25 src/main/eval.c:3331 src/main/subscript.c:312 #: src/main/subscript.c:353 src/main/subscript.c:457 src/main/subscript.c:554 msgid "subscript out of bounds" msgstr "下標超出邊界" #: src/include/Errormsg.h:26 #, fuzzy, c-format msgid "object of type '%s' is not subsettable" msgstr "目的物件不是次集合表格" #: src/main/CConverters.c:305 msgid "no R-to-C converter found corresponding to identifier" msgstr "找不到與識別碼相應的 R-to-C 轉換器" #: src/main/CommandLineArgs.c:172 msgid "WARNING: no value given for --encoding given\n" msgstr "警告: 沒有設定 --enconding 的值\n" #: src/main/CommandLineArgs.c:195 #, c-format msgid "WARNING: option '%s' no longer supported\n" msgstr "警告: 本版本不再支援 '%s' 選項\n" #: src/main/CommandLineArgs.c:209 #, c-format msgid "WARNING: no value given for '%s'\n" msgstr "警告: 沒有設定 '%s' 的值\n" #: src/main/CommandLineArgs.c:217 #, c-format msgid "WARNING: '%s' value is invalid: ignored\n" msgstr "警告: '%s' 的值不正確: 忽略不用\n" #: src/main/CommandLineArgs.c:221 #, fuzzy, c-format msgid "WARNING: %s: too large and ignored\n" msgstr "警告: %s=%lu'%c': 太大，忽略不用\n" #: src/main/CommandLineArgs.c:237 msgid "WARNING: no value given for '--max-ppsize'\n" msgstr "警告: 沒有設定 '--max-ppsize' 的值\n" #: src/main/CommandLineArgs.c:242 #, fuzzy msgid "WARNING: '--max-ppsize' value is negative: ignored\n" msgstr "警告: '-max-ppsize' 的值是負數: 忽略不用\n" #: src/main/CommandLineArgs.c:244 #, fuzzy msgid "WARNING: '--max-ppsize' value is too small: ignored\n" msgstr "警告: '-max-ppsize' 的值太小: 忽略不用\n" #: src/main/CommandLineArgs.c:247 #, fuzzy msgid "WARNING: '--max-ppsize' value is too large: ignored\n" msgstr "警告: '-max-ppsize' 的值太大: 忽略不用\n" #: src/main/RNG.c:140 #, c-format msgid "unif_rand: unimplemented RNG kind %d" msgstr "unif_rand: RNG 類型 %d 尚未實作" #: src/main/RNG.c:205 #, c-format msgid "FixupSeeds: unimplemented RNG kind %d" msgstr "FixupSeeds: RNG 類型 %d 尚未實作" #: src/main/RNG.c:240 msgid "'user_unif_rand' not in load table" msgstr "'user_unif_rand' 在載入表中並不存在" #: src/main/RNG.c:248 msgid "cannot read seeds unless 'user_unif_nseed' is supplied" msgstr "只有在設定了 'user_unif_nseed' 以後才能讀隨機種子" #: src/main/RNG.c:253 msgid "seed length must be in 0...625; ignored" msgstr "隨機種子的長度必須在 0 到 625 之間; 忽略不用" #: src/main/RNG.c:261 #, c-format msgid "RNG_Init: unimplemented RNG kind %d" msgstr "RNG_Init: RNG 類型 %d 尚未實作" #: src/main/RNG.c:310 msgid ".Random.seed is a missing argument with no default" msgstr ".Random.seed 這個引數沒有設定也沒有預設值" #: src/main/RNG.c:311 #, fuzzy, c-format msgid ".Random.seed is not an integer vector but of type '%s'" msgstr ".Random.seed 不是向量" #: src/main/RNG.c:317 msgid ".Random.seed[1] is not a valid integer" msgstr ".Random.seed[1]不是正確的整數" #: src/main/RNG.c:321 msgid ".Random.seed[0] is not a valid Normal type" msgstr ".Random.seed[0] 不是正確的 Normal 類別" #: src/main/RNG.c:332 msgid ".Random.seed[1] = 5 but no user-supplied generator" msgstr ".Random.seed[1]=5 但沒有使用者指定的產生器" #: src/main/RNG.c:335 msgid ".Random.seed[1] is not a valid RNG kind (code)" msgstr ".Random.seed[1] 不是正確的 RNG 類別 (程式碼)" #: src/main/RNG.c:357 msgid ".Random.seed has wrong length" msgstr ".Random.seed 的長度不正確" #: src/main/RNG.c:410 #, c-format msgid "RNGkind: unimplemented RNG kind %d" msgstr "RNGkind: RNG 類型 %d 尚未實作" #: src/main/RNG.c:422 msgid "invalid Normal type in RNGkind" msgstr "RNGkind 中的 Normal 類別不正確" #: src/main/RNG.c:425 msgid "'user_norm_rand' not in load table" msgstr "'user_norm_rand' 不在載入表中" #: src/main/RNG.c:468 msgid "supplied seed is not a valid integer" msgstr "提供的隨機種子不是正確的整數" #: src/main/Rdynload.c:250 msgid "R_RegisterRoutines called with invalid DllInfo object." msgstr "R_RegisterRoutines 呼叫時 DllInfo 目的物件不正確。" #: src/main/Rdynload.c:533 msgid "Maximal number of DLLs reached..." msgstr "已達到了 DLL 數目的上限..." #: src/main/Rdynload.c:588 msgid "could not allocate space for 'path'" msgstr "無法為 'path' 指派空間" #: src/main/Rdynload.c:601 #, c-format msgid "DLLname '%s' is too long" msgstr "DLLname '%s' 太長" #: src/main/Rdynload.c:622 msgid "could not allocate space for 'name'" msgstr "無法為 'name' 指派空間" #: src/main/Rdynload.c:892 src/main/Rdynload.c:908 src/main/util.c:691 msgid "character argument expected" msgstr "需要字元引數" #: src/main/Rdynload.c:898 src/main/Rdynload.c:931 #, fuzzy, c-format msgid "" "unable to load shared object '%s':\n" " %s" msgstr "" "無法載入共享函數庫「%s」：\n" " %s" #: src/main/Rdynload.c:911 #, fuzzy, c-format msgid "shared object '%s' was not loaded" msgstr "沒有載入動態/共享函數庫 '%s'" #: src/main/Rdynload.c:971 #, c-format msgid "cannot allocate memory for registered native symbol (%d bytes)" msgstr "無法給已登記的原生符號 (%d 位元組) 指派記憶體" #: src/main/Rdynload.c:1091 msgid "must pass package name or DllInfo reference" msgstr "必須傳給套件名稱或 DllInfo 參照" #: src/main/Rdynload.c:1187 src/main/dotcode.c:128 #, c-format msgid "Unimplemented type %d in createRSymbolObject" msgstr "createRSymbolObject 中的類型 %d 尚未被實作" #: src/main/Rdynload.c:1269 msgid "R_getRegisteredRoutines() expects a DllInfo reference" msgstr "R_getRegisteredRoutines() 需要 DllInfo 參考" #: src/main/Rdynload.c:1272 msgid "NULL value passed for DllInfo" msgstr "傳給 DllInfo 一個 NULL 值" #: src/main/Rdynload.c:1308 src/main/Rdynload.c:1314 src/main/Rdynload.c:1321 #: src/main/Rdynload.c:1327 src/main/Rdynload.c:1333 msgid "no dyn.load support in this R version" msgstr "本 R 版本不支援 dyn.load" #: src/main/Rdynload.c:1378 #, c-format msgid "function '%s' not provided by package '%s'" msgstr "" #: src/main/Rdynload.c:1380 #, fuzzy msgid "table entry must be an external pointer" msgstr "無法取消外部指標的類別" #: src/main/Rstrptime.h:499 src/main/Rstrptime.h:962 #, fuzzy, c-format msgid "use of %s for input is not supported" msgstr "call_R 不支援 '%s' 型式" #: src/main/Rstrptime.h:1216 msgid "input string is too long" msgstr "輸入字串太長" #: src/main/Rstrptime.h:1218 msgid "invalid multibyte input string" msgstr "無效的多位元組輸入字串" #: src/main/Rstrptime.h:1221 msgid "format string is too long" msgstr "格式字串太長" #: src/main/Rstrptime.h:1223 msgid "invalid multibyte format string" msgstr "無效的多位元組格式字串" #: src/main/agrep.c:69 src/main/character.c:1021 src/main/character.c:1025 #: src/main/grep.c:760 src/main/grep.c:1487 src/main/grep.c:1491 #: src/main/grep.c:2173 #, fuzzy, c-format msgid "argument '%s' has length > 1 and only the first element will be used" msgstr "條件的長度 > 1，因此只能用其第一元素" #: src/main/agrep.c:84 src/main/grep.c:173 src/main/grep.c:800 msgid "string marked as \"bytes\" found, so using useBytes = TRUE" msgstr "" #: src/main/agrep.c:107 src/main/grep.c:827 src/main/grep.c:2215 msgid "regular expression is invalid in this locale" msgstr "正規表示式不適用於此語言環境" #: src/main/agrep.c:113 #, fuzzy, c-format msgid "regcomp error: '%s'" msgstr "讀取錯誤" #: src/main/agrep.c:149 src/main/grep.c:221 src/main/grep.c:308 #: src/main/grep.c:416 src/main/grep.c:571 src/main/grep.c:877 #: src/main/grep.c:2272 src/main/grep.c:2338 #, c-format msgid "input string %d is invalid in this locale" msgstr "輸入的字串 %d 不適用於此語言環境" #: src/main/apply.c:41 src/main/apply.c:103 src/main/complex.c:737 msgid "invalid length" msgstr "長度不正確" #: src/main/apply.c:98 #, fuzzy msgid "FUN.VALUE must be a vector" msgstr "程式碼必須是一般向量" #: src/main/apply.c:100 #, fuzzy msgid "invalid USE.NAMES value" msgstr "'%s' 值不正確" #: src/main/apply.c:150 #, c-format msgid "" "values must be length %d,\n" " but FUN(X[[%d]]) result is length %d" msgstr "" #: src/main/apply.c:162 #, c-format msgid "" "values must be type '%s',\n" " but FUN(X[[%d]]) result is type '%s'" msgstr "" #: src/main/apply.c:181 #, fuzzy, c-format msgid "type '%s' is not supported" msgstr "call_R 不支援 '%s' 型式" #: src/main/apply.c:212 #, c-format msgid "dimnames() is neither NULL nor list of length %d" msgstr "" #: src/main/arithmetic.c:35 msgid "NaNs produced" msgstr "產生了 NaNs" #: src/main/arithmetic.c:36 msgid "Non-numeric argument to mathematical function" msgstr "數學函數中使用了非數值引數" #: src/main/arithmetic.c:178 msgid "probable complete loss of accuracy in modulus" msgstr "係數的精確度很可能完全損失" #: src/main/arithmetic.c:317 msgid "operator needs one or two arguments" msgstr "運算子需要一或兩個引數" #: src/main/arithmetic.c:334 msgid "non-numeric argument to binary operator" msgstr "二元運算子中有非數值引數" #: src/main/arithmetic.c:395 src/main/relop.c:126 msgid "non-conformable arrays" msgstr "非調和陣列" #: src/main/arithmetic.c:438 msgid "non-conformable time-series" msgstr "非調和時間序列" #: src/main/arithmetic.c:460 src/main/logic.c:120 src/main/relop.c:69 #: src/main/relop.c:164 #, fuzzy msgid "longer object length is not a multiple of shorter object length" msgstr "長的目的物件長度不是短的目的物件長度的整數倍" #: src/main/arithmetic.c:532 msgid "invalid argument to unary operator" msgstr "一元運算子的引數不正確" #: src/main/arithmetic.c:556 src/main/arithmetic.c:575 msgid "invalid unary operator" msgstr "一元運算子不正確" #: src/main/arithmetic.c:622 msgid "NAs produced by integer overflow" msgstr "整數向上溢位產生了 NA" #: src/main/arithmetic.c:1117 msgid "unimplemented real function of 1 argument" msgstr "單引數的實數函數目前還沒有實作" #: src/main/arithmetic.c:1131 src/main/complex.c:629 src/main/complex.c:699 msgid "unimplemented complex function" msgstr "尚未實作複數功能" #: src/main/arithmetic.c:1448 src/main/arithmetic.c:1831 #: src/main/arithmetic.c:2005 src/main/arithmetic.c:2117 #, c-format msgid "unimplemented real function of %d numeric arguments" msgstr "%d 個數值引數的實數函數尚未實作" #: src/main/arithmetic.c:1478 #, fuzzy, c-format msgid "%d arguments passed to '%s' which requires 1 or 2" msgstr "給了 'log'%d 個引數，但它最多只能用兩個引數" #: src/main/arithmetic.c:1497 msgid "invalid second argument of length 0" msgstr "第二引數長度為 0，不正確" #: src/main/arithmetic.c:1567 #, fuzzy msgid "invalid argument 'base' of length 0" msgstr "第二引數長度為 0，不正確" #: src/main/arithmetic.c:1575 #, c-format msgid "%d arguments passed to 'log' which requires 1 or 2" msgstr "給了 'log'%d 個引數，但它最多只能用兩個引數" #: src/main/array.c:79 #, fuzzy msgid "'data' must be of a vector type" msgstr "'path' 必須是字元向量" #: src/main/array.c:93 src/main/array.c:101 msgid "non-numeric matrix extent" msgstr "非數值的矩陣範圍" #: src/main/array.c:96 #, fuzzy msgid "invalid 'nrow' value (too large or NA)" msgstr "矩陣: 'nrow' 值不正確 (或是太大、或為 NA)" #: src/main/array.c:98 #, fuzzy msgid "invalid 'nrow' value (< 0)" msgstr "矩陣: 'nrow' 值不正確 (< 0)" #: src/main/array.c:104 #, fuzzy msgid "invalid 'ncol' value (too large or NA)" msgstr "矩陣: 'ncol' 值不正確 (或是太大、或為 NA)" #: src/main/array.c:106 #, fuzzy msgid "invalid 'ncol' value (< 0)" msgstr "矩陣: 'ncol' 值不正確 (< 0)" #: src/main/array.c:116 #, fuzzy, c-format msgid "" "data length [%d] is not a sub-multiple or multiple of the number of rows [%d]" msgstr "資料長度[%d] 不是矩陣列數[%d] 的整數倍" #: src/main/array.c:119 #, fuzzy, c-format msgid "" "data length [%d] is not a sub-multiple or multiple of the number of columns " "[%d]" msgstr "資料長度[%d] 不是矩陣行數[%d] 的整數倍" #: src/main/array.c:122 msgid "data length exceeds size of matrix" msgstr "資料長度超過矩陣的大小" #: src/main/array.c:127 #, fuzzy msgid "too many elements specified" msgstr "矩陣: 指定了太多的元素" #: src/main/array.c:191 msgid "negative extents to matrix" msgstr "矩陣的範圍不能是負值" #: src/main/array.c:193 msgid "allocMatrix: too many elements specified" msgstr "allocMatrix: 指定了太多的元素" #: src/main/array.c:220 #, fuzzy msgid "negative extents to 3D array" msgstr "矩陣的範圍不能是負值" #: src/main/array.c:222 #, fuzzy msgid "alloc3Darray: too many elements specified" msgstr "allocMatrix: 指定了太多的元素" #: src/main/array.c:245 msgid "allocArray: too many elements specified by 'dims'" msgstr "allocArray: 'dims' 指定了太多的元素" #: src/main/array.c:418 #, fuzzy msgid "a matrix-like object is required as argument to 'row/col'" msgstr "'row/col' 必須用矩陣引數" #: src/main/array.c:629 #, fuzzy msgid "requires numeric/complex matrix/vector arguments" msgstr "需要數值矩陣/向量引數" #: src/main/array.c:719 src/main/array.c:723 src/main/array.c:727 msgid "non-conformable arguments" msgstr "非調和引數" #: src/main/array.c:1024 msgid "argument is not a matrix" msgstr "引數不是矩陣" #: src/main/array.c:1059 msgid "invalid first argument, must be an array" msgstr "第一個引數不正確, 必須是陣列" #: src/main/array.c:1074 src/main/array.c:1077 msgid "'a' does not have named dimnames" msgstr "" #: src/main/array.c:1084 #, c-format msgid "perm[%d] does not match a dimension name" msgstr "" #: src/main/array.c:1091 msgid "'perm' is of wrong length" msgstr "'perm' 的長度不正確" #: src/main/array.c:1098 msgid "value out of range in 'perm'" msgstr "'perm' 的值在範圍外" #: src/main/array.c:1180 #, fuzzy msgid "'resize' must be TRUE or FALSE" msgstr "'increasing' 必須是 TRUE 或是 FALSE" #: src/main/array.c:1244 msgid "'x' must be numeric" msgstr "'x' 必須為數值" #: src/main/attrib.c:39 src/main/attrib.c:226 src/main/attrib.c:260 #: src/main/attrib.c:282 src/main/attrib.c:399 src/main/attrib.c:446 #: src/main/attrib.c:495 msgid "attempt to set an attribute on NULL" msgstr "試圖在 NULL 上設定屬性" #: src/main/attrib.c:71 #, fuzzy, c-format msgid "row names must be 'character' or 'integer', not '%s'" msgstr "'hostname' 必須是長度為 1 的字元向量" #: src/main/attrib.c:123 #, c-format msgid "getAttrib: invalid type (%s) for TAG" msgstr "getAttrib: 標記的類型 (%s) 不正確" #: src/main/attrib.c:374 #, c-format msgid "invalid type (%s) for 'names': must be vector" msgstr "'names' 的類型 (%s) 不正確: 必須是向量" #: src/main/attrib.c:377 #, c-format msgid "'names' attribute [%d] must be the same length as the vector [%d]" msgstr "'names' 屬性 [%d] 必須和向量的長度 [%d] 一樣" #: src/main/attrib.c:382 msgid "names() applied to a non-vector" msgstr "names() 被用於非向量" #: src/main/attrib.c:390 msgid "invalid time series parameters specified" msgstr "時間序列參數設定不正確" #: src/main/attrib.c:403 #, fuzzy msgid "'tsp' attribute must be numeric" msgstr "'tsp' 屬性必須是長度為三的數值" #: src/main/attrib.c:409 msgid "'tsp' attribute must be numeric of length three" msgstr "'tsp' 屬性必須是長度為三的數值" #: src/main/attrib.c:426 msgid "cannot assign 'tsp' to zero-length vector" msgstr "零長度向量不能設成 'tsp'" #: src/main/attrib.c:457 msgid "attempt to set invalid 'comment' attribute" msgstr "試圖設定無效的 'comment' 屬性" #: src/main/attrib.c:504 msgid "adding class \"factor\" to an invalid object" msgstr "" #: src/main/attrib.c:512 msgid "attempt to set invalid 'class' attribute" msgstr "試圖設定無效的 'class' 屬性" #: src/main/attrib.c:787 msgid "incompatible 'names' argument" msgstr "不相容的 'names' 引數" #: src/main/attrib.c:842 #, c-format msgid "invalid type (%s) to set 'names' attribute" msgstr "以無效的類型 (%s) 設定 'names' 屬性" #: src/main/attrib.c:911 msgid "'dimnames' applied to non-array" msgstr "'dimnames' 被應用於非陣列" #: src/main/attrib.c:916 msgid "'dimnames' must be a list" msgstr "'dimnames' 必須是串列" #: src/main/attrib.c:919 src/main/attrib.c:942 #, c-format msgid "length of 'dimnames' [%d] must match that of 'dims' [%d]" msgstr "'dimnames' 的長度 [%d] 必須同 'dims' 的長度 [%d] 相等" #: src/main/attrib.c:948 #, c-format msgid "invalid type (%s) for 'dimnames' (must be a vector)" msgstr "設 'dimnames' 時的類型 (%s) 不正確 (必須為向量)" #: src/main/attrib.c:951 #, c-format msgid "length of 'dimnames' [%d] not equal to array extent" msgstr "'dimnames' 的長度 [%d] 必須與陣列範圍相等" #: src/main/attrib.c:1021 src/main/builtin.c:64 src/main/builtin.c:101 #: src/main/envir.c:1514 src/main/envir.c:1638 src/main/envir.c:1700 #: src/main/envir.c:1823 src/main/paste.c:68 src/main/paste.c:277 #: src/main/plot.c:1726 src/main/random.c:474 msgid "invalid first argument" msgstr "第一個引數不正確" #: src/main/attrib.c:1024 src/main/plot.c:1733 msgid "invalid second argument" msgstr "第二個引數不正確" #: src/main/attrib.c:1032 #, fuzzy msgid "length-0 dimension vector is invalid" msgstr "dim: 零維長度的向量無效" #: src/main/attrib.c:1037 msgid "the dims contain missing values" msgstr "" #: src/main/attrib.c:1039 msgid "the dims contain negative values" msgstr "" #: src/main/attrib.c:1043 #, fuzzy, c-format msgid "dims [product %d] do not match the length of object [%d]" msgstr "dim<- : dims [product %d] 與目的物件 [%d] 的長度不符" #: src/main/attrib.c:1109 msgid "duplicated levels will not be allowed in factors anymore" msgstr "" #: src/main/attrib.c:1139 #, fuzzy msgid "attributes must be a list or NULL" msgstr "屬性必須在串列中設定" #: src/main/attrib.c:1144 msgid "attributes must be named" msgstr "屬性必須命名" #: src/main/attrib.c:1148 #, c-format msgid "all attributes must have names [%d does not]" msgstr "所有的屬性都必須有名稱 [%d 沒有]" #: src/main/attrib.c:1247 #, fuzzy msgid "'which' must be of mode character" msgstr "'name' 屬性必須是字元" #: src/main/attrib.c:1249 #, fuzzy msgid "exactly one attribute 'which' must be given" msgstr "只能給出一個 'name' 屬性" #: src/main/attrib.c:1307 src/main/attrib.c:1330 src/main/subscript.c:209 #: src/main/subscript.c:213 src/main/subset.c:1075 src/main/subset.c:1125 #, c-format msgid "partial match of '%s' to '%s'" msgstr "" #: src/main/attrib.c:1362 #, fuzzy msgid "'name' must be non-null character string" msgstr "'name' 必須為非空字元" #: src/main/attrib.c:1484 src/main/attrib.c:1555 src/main/attrib.c:1592 msgid "invalid type or length for slot name" msgstr "名稱插槽的類型或長度不正確" #: src/main/attrib.c:1518 #, c-format msgid "cannot get a slot (\"%s\") from an object of type \"%s\"" msgstr "類型 \"%2$s\" 的目的物件中沒有 \"%1$s\" 這樣一個插槽" #: src/main/attrib.c:1529 #, c-format msgid "no slot of name \"%s\" for this object of class \"%s\"" msgstr "\"%1$s\" 插槽名不存在於 \"%2$s\" 類型目的物件中" #: src/main/attrib.c:1546 #, fuzzy msgid "attempt to set slot on NULL object" msgstr "試圖在 NULL 上設定屬性" #: src/main/attrib.c:1587 msgid "formal classes cannot be used without the methods package" msgstr "一定要有方法套件才能使用正式類別" #: src/main/attrib.c:1599 #, c-format msgid "" "trying to get slot \"%s\" from an object of a basic class (\"%s\") with no " "slots" msgstr "無法從沒有插槽的基本類別 (\"%2$s\") 的目的物件中取得 \"%1$s\" 插槽" #: src/main/attrib.c:1603 #, c-format msgid "" "trying to get slot \"%s\" from an object (class \"%s\") that is not an S4 " "object " msgstr "嘗試從一個不是 S4 物件的物件 (類別 \"%2$s\") 中獲取插槽 \"%1$s\" " #: src/main/base.c:275 #, fuzzy msgid "Event GE_ScalePS requires a single numeric value" msgstr "UpdatePS 事件需要單一數值" #: src/main/bind.c:272 src/main/bind.c:312 src/main/bind.c:365 #: src/main/bind.c:443 src/main/bind.c:473 #, fuzzy, c-format msgid "type '%s' is unimplemented in '%s'" msgstr "'%2$s' 中尚未實作類型 %1$d" #: src/main/bind.c:674 msgid "repeated formal argument 'recursive'" msgstr "正式引數 'recursive' 出現重複" #: src/main/bind.c:685 msgid "repeated formal argument 'use.names'" msgstr "正式引數 'use.names' 出現重複" #: src/main/bind.c:883 msgid "argument not a list" msgstr "引數不是串列" #: src/main/bind.c:1027 src/main/eval.c:2408 src/main/eval.c:2417 #: src/main/objects.c:310 src/main/objects.c:345 src/main/objects.c:720 #: src/main/objects.c:737 src/main/objects.c:744 #, c-format msgid "class name too long in '%s'" msgstr "'%s' 中的類別名稱太長" #: src/main/bind.c:1102 msgid "cannot create a matrix from these types" msgstr "無法從這些類型建立矩陣" #: src/main/bind.c:1172 #, c-format msgid "number of rows of matrices must match (see arg %d)" msgstr "矩陣的列數必須相符 (參看引數 %d)" #: src/main/bind.c:1407 #, c-format msgid "number of columns of matrices must match (see arg %d)" msgstr "矩陣的行數必須相符 (參看引數 %d)" #: src/main/builtin.c:40 src/main/builtin.c:44 msgid "vector size cannot be NA" msgstr "向量大小不能是 NA" #: src/main/builtin.c:48 #, fuzzy msgid "vector size cannot be NA/NaN" msgstr "向量大小不能是 NA" #: src/main/builtin.c:49 #, fuzzy msgid "vector size cannot be infinite" msgstr "向量大小不能是負的" #: src/main/builtin.c:50 msgid "vector size cannot be negative" msgstr "向量大小不能是負的" #: src/main/builtin.c:51 msgid "vector size specified is too large" msgstr "指定的向量大小太大" #: src/main/builtin.c:73 src/main/builtin.c:82 src/main/builtin.c:282 #: src/main/builtin.c:317 src/main/builtin.c:356 src/main/builtin.c:366 #: src/main/coerce.c:1448 src/main/connections.c:2806 src/main/engine.c:2847 #: src/main/envir.c:923 src/main/envir.c:976 src/main/envir.c:1066 #: src/main/envir.c:1523 src/main/envir.c:1643 src/main/envir.c:1711 #: src/main/envir.c:1832 src/main/envir.c:2505 src/main/envir.c:2565 #: src/main/envir.c:2888 src/main/envir.c:2917 src/main/envir.c:2938 #: src/main/envir.c:2961 src/main/envir.c:2996 src/main/envir.c:3017 #: src/main/envir.c:3323 src/main/envir.c:3328 src/main/eval.c:4426 #: src/main/objects.c:190 src/main/objects.c:196 src/main/saveload.c:2058 #: src/main/saveload.c:2349 src/main/serialize.c:2355 msgid "use of NULL environment is defunct" msgstr "NULL 環境的使用已經廢止" #: src/main/builtin.c:297 msgid "replacement object is not an environment" msgstr "替換目的物件不是環境物件" #: src/main/builtin.c:322 msgid "'enclos' must be an environment" msgstr "'enclos' 必須是環境物件" #: src/main/builtin.c:343 src/main/builtin.c:361 msgid "argument is not an environment" msgstr "引數不是環境物件" #: src/main/builtin.c:345 msgid "the empty environment has no parent" msgstr "空環境沒有上一層" #: src/main/builtin.c:363 msgid "can not set parent of the empty environment" msgstr "無法設定空環境的上層" #: src/main/builtin.c:371 msgid "'parent' is not an environment" msgstr "'parent' 不是環境物件" #: src/main/builtin.c:511 src/main/connections.c:3409 #: src/main/connections.c:3757 src/main/connections.c:3791 #: src/main/connections.c:4166 src/main/connections.c:4231 #: src/main/connections.c:4437 src/main/connections.c:4441 #: src/main/connections.c:4802 src/main/deparse.c:323 src/main/deparse.c:409 #: src/main/scan.c:1705 src/main/serialize.c:1670 msgid "cannot write to this connection" msgstr "無法寫入此連結" #: src/main/builtin.c:516 src/main/builtin.c:546 src/main/platform.c:358 #: src/main/platform.c:361 src/main/plot3d.c:2526 src/main/plot3d.c:2530 #, c-format msgid "invalid '%s' specification" msgstr "'%s' 設定不正確" #: src/main/builtin.c:533 msgid "non-positive 'fill' argument will be ignored" msgstr "非正數的 'fill' 引數將會被忽略" #: src/main/builtin.c:608 #, c-format msgid "argument %d (type '%s') cannot be handled by 'cat'" msgstr "'cat' 目前還不能用 %d 引數 (型態 '%s')" #: src/main/builtin.c:727 msgid "vector: zero-length 'type' argument" msgstr "向量: 'type' 引數的長度為零" #: src/main/builtin.c:746 #, fuzzy, c-format msgid "vector: cannot make a vector of mode '%s'." msgstr "向量: 無法建立狀態為 \"%s\" 的向量。" #: src/main/builtin.c:771 msgid "cannot set length of non-vector" msgstr "不能設定非向量的長度" #: src/main/builtin.c:872 src/main/devices.c:367 src/main/options.c:578 msgid "invalid argument" msgstr "引數不正確" #: src/main/builtin.c:874 src/main/builtin.c:878 src/main/character.c:353 #: src/main/coerce.c:2596 #, fuzzy msgid "invalid value" msgstr "'%s' 值不正確" #: src/main/builtin.c:877 #, fuzzy msgid "missing value for 'length'" msgstr "length<- 'length' 遺漏了設定值" #: src/main/builtin.c:901 src/main/eval.c:417 src/main/eval.c:534 #: src/main/eval.c:1827 src/main/eval.c:1893 src/main/eval.c:1953 #: src/main/eval.c:2288 src/main/eval.c:3822 src/main/eval.c:3931 msgid "'...' used in an incorrect context" msgstr "'...' 的上下文用得不正確" #: src/main/builtin.c:922 #, c-format msgid "duplicate switch defaults: '%s' and '%s'" msgstr "" #: src/main/builtin.c:955 msgid "'EXPR' is missing" msgstr "" #: src/main/builtin.c:959 src/main/eval.c:4269 #, fuzzy msgid "EXPR must be a length 1 vector" msgstr "switch: EXPR 必須回傳長度為 1 的向量" #: src/main/character.c:103 src/main/character.c:126 #, fuzzy, c-format msgid "'%s' requires a character vector" msgstr "strtrim() 需要字元向量" #: src/main/character.c:155 #, c-format msgid "" "number of characters is not computable for element %d in \"bytes\" encoding" msgstr "" #: src/main/character.c:160 src/main/character.c:188 src/main/character.c:636 #: src/main/character.c:732 #, c-format msgid "invalid multibyte string %d" msgstr "多位元組字串 %d 不正確" #: src/main/character.c:176 #, c-format msgid "width is not computable for element %d in \"bytes\" encoding" msgstr "" #: src/main/character.c:252 msgid "extracting substrings from a non-character object" msgstr "無法從非字元目的物件中抽取子字串" #: src/main/character.c:257 src/main/character.c:350 #, fuzzy msgid "invalid substring argument(s)" msgstr "字串引數不正確" #: src/main/character.c:345 msgid "replacing substrings in a non-character object" msgstr "無法在非字元的目的物件中替換子字串" #: src/main/character.c:537 #, fuzzy msgid "the first argument must be a character vector" msgstr "第一引數必須是字元向量" #: src/main/character.c:554 msgid "abbreviate used with non-ASCII chars" msgstr "abbreviate 不適用於非 ASCII 字元" #: src/main/character.c:574 msgid "non-character names" msgstr "不能有非字元名稱" #: src/main/character.c:678 src/main/grep.c:152 #, fuzzy msgid "non-character argument" msgstr "不能有非字元名稱" #: src/main/character.c:787 #, c-format msgid "decreasing range specification ('%lc-%lc')" msgstr "正在遞減範圍設定 ('%lc-%lc')" #: src/main/character.c:873 #, c-format msgid "decreasing range specification ('%c-%c')" msgstr "正在遞減範圍設定 ('%c-%c')" #: src/main/character.c:1061 #, fuzzy msgid "invalid UTF-8 string 'old'" msgstr "多位元組字串 'old' 不正確" #: src/main/character.c:1067 msgid "invalid multibyte string 'old'" msgstr "多位元組字串 'old' 不正確" #: src/main/character.c:1080 #, fuzzy msgid "invalid UTF-8 string 'new'" msgstr "多位元組字串 'new' 不正確" #: src/main/character.c:1086 msgid "invalid multibyte string 'new'" msgstr "多位元組字串 'new' 不正確" #: src/main/character.c:1112 src/main/character.c:1200 msgid "'old' is longer than 'new'" msgstr "'old' 比 'new' 要長" #: src/main/character.c:1144 #, c-format msgid "invalid input multibyte string %d" msgstr "輸入的多位元組字串 %d 不正確" #: src/main/character.c:1249 msgid "strtrim() requires a character vector" msgstr "strtrim() 需要字元向量" #: src/main/coerce.c:28 #, fuzzy msgid "invalid 'mode' argument" msgstr "'%s' 引數不正確" #: src/main/coerce.c:29 msgid "applies only to lists and vectors" msgstr "只能用於串列和向量" #: src/main/coerce.c:73 src/main/errors.c:1107 msgid "NAs introduced by coercion" msgstr "強制變更過程中產生了 NA" #: src/main/coerce.c:75 src/main/errors.c:1108 msgid "inaccurate integer conversion in coercion" msgstr "強制變更造成整數不精確" #: src/main/coerce.c:77 src/main/errors.c:1109 msgid "imaginary parts discarded in coercion" msgstr "強制變更時丟棄了虛數部分" #: src/main/coerce.c:79 msgid "out-of-range values treated as 0 in coercion to raw" msgstr "在強制變更成純量值時，任何溢位值當作 0 來處理" #: src/main/coerce.c:409 #, fuzzy, c-format msgid "invalid data of mode '%s' (too short)" msgstr "狀態為 \"%s\" 的資料不正確 (太短)" #: src/main/coerce.c:937 #, fuzzy, c-format msgid "'pairlist' object cannot be coerced to type '%s'" msgstr "'pairlist' 目的物件不能被強制變更成 %s" #: src/main/coerce.c:1045 #, fuzzy, c-format msgid "(list) object cannot be coerced to type '%s'" msgstr "(串列) 目的物件不能強制變更成 %s" #: src/main/coerce.c:1068 #, fuzzy, c-format msgid "(symbol) object cannot be coerced to type '%s'" msgstr "(串列) 目的物件不能強制變更成 %s" #: src/main/coerce.c:1084 src/main/coerce.c:1396 msgid "no method for coercing this S4 class to a vector" msgstr "" #: src/main/coerce.c:1143 msgid "environments cannot be coerced to other types" msgstr "環境物件不能被強制變更成其它類型" #: src/main/coerce.c:1290 #, fuzzy msgid "attempting to coerce non-factor" msgstr "不能加大非向量" #: src/main/coerce.c:1444 msgid "list argument expected" msgstr "需要串列引數" #: src/main/coerce.c:1452 src/main/eval.c:4423 src/main/eval.c:4430 msgid "invalid environment" msgstr "環境物件不正確" #: src/main/coerce.c:1456 msgid "argument must have length at least 1" msgstr "引數的長度至少要為 1" #: src/main/coerce.c:1481 msgid "invalid body for function" msgstr "函數本體不正確" #: src/main/coerce.c:1504 msgid "invalid length 0 argument" msgstr "長度為 0 的引數是不正確的" #: src/main/coerce.c:1519 msgid "invalid argument list" msgstr "引數串列不正確" #: src/main/coerce.c:1829 msgid "type \"single\" unimplemented in R" msgstr "類型 \"single\" 目前在 R 中還沒有實作" #: src/main/coerce.c:1831 msgid "unimplemented predicate" msgstr "尚未實作 predicate" #: src/main/coerce.c:1978 src/main/coerce.c:2078 #, fuzzy, c-format msgid "%s() applied to non-(list or vector) of type '%s'" msgstr "%s() 不適用於非串列或非向量" #: src/main/coerce.c:2218 src/main/dotcode.c:770 src/main/dotcode.c:813 #: src/main/dotcode.c:1636 msgid "'name' is missing" msgstr "" #: src/main/coerce.c:2225 msgid "first argument must be a character string" msgstr "第一個引數必須是字串" #: src/main/coerce.c:2252 #, fuzzy msgid "'what' must be a character string or a function" msgstr "第一個引數必須是字串或函數" #: src/main/coerce.c:2255 #, fuzzy msgid "'args' must be a list" msgstr "'dimnames' 必須是串列" #: src/main/coerce.c:2258 msgid "'envir' must be an environment" msgstr "'envir' 必須是環境物件" #: src/main/coerce.c:2319 src/main/coerce.c:2360 msgid "... used in an incorrect context" msgstr "... 的上下文用得不正確" #: src/main/coerce.c:2408 msgid "invalid environment specified" msgstr "環境設定不正確" #: src/main/coerce.c:2469 msgid "Setting class(x) to NULL; result will no longer be an S4 object" msgstr "" #: src/main/coerce.c:2472 #, c-format msgid "" "Setting class(x) to multiple strings (\"%s\", \"%s\", ...); result will no " "longer be an S4 object" msgstr "" #: src/main/coerce.c:2474 #, c-format msgid "" "Setting class(x) to \"%s\" sets attribute to NULL; result will no longer be " "an S4 object" msgstr "" #: src/main/coerce.c:2504 msgid "invalid replacement object to be a class string" msgstr "字串類別的替換目的物件不正確" #: src/main/coerce.c:2525 #, c-format msgid "" "\"%s\" can only be set as the class if the object has this type; found \"%s\"" msgstr "只有在目的物件有此一類別的情況下才能設 \"%s\"；不應該有 \"%s\"" #: src/main/coerce.c:2543 #, c-format msgid "" "invalid to set the class to matrix unless the dimension attribute is of " "length 2 (was %d)" msgstr "除非維度的長度為 2(目前是 %d)，否則不能設為矩陣類別" #: src/main/coerce.c:2551 msgid "" "cannot set class to \"array\" unless the dimension attribute has length > 0" msgstr "除非維度的長度 >0，否則不能設為 \"array\" 類別" #: src/main/coerce.c:2587 #, fuzzy msgid "'value' must be non-null character string" msgstr "'name' 必須為非空字元" #: src/main/coerce.c:2600 msgid "invalid to change the storage mode of a factor" msgstr "" #: src/main/colors.c:69 #, c-format msgid "color intensity %g, not in [0,1]" msgstr "顏色強度 %g 不在 [0,1] 之間" #: src/main/colors.c:76 #, c-format msgid "color intensity %d, not in 0:255" msgstr "顏色強度 %d 不在 0:255 之間" #: src/main/colors.c:83 #, c-format msgid "alpha level %g, not in [0,1]" msgstr "alpha 層次 %g 不在 [0,1] 之間" #: src/main/colors.c:90 #, c-format msgid "alpha level %d, not in 0:255" msgstr "alpha 層次 %d 不在 0:255 之間" #: src/main/colors.c:130 #, fuzzy msgid "invalid hsv color" msgstr "hcl 顏色不正確" #: src/main/colors.c:239 msgid "invalid hcl color" msgstr "hcl 顏色不正確" #: src/main/colors.c:290 #, fuzzy msgid "invalid 'names' vector" msgstr "names 向量不正確" #: src/main/colors.c:335 msgid "invalid gray level, must be in [0,1]." msgstr "graylevel 必須在 [0,1] 之間。" #: src/main/colors.c:425 msgid "rgb is not a matrix (internally)" msgstr "rgb 不是矩陣 (內部)" #: src/main/colors.c:428 msgid "rgb must have 3 rows (internally)" msgstr "rgb 必須有三列 (內部)" #: src/main/colors.c:482 msgid "bad hsv to rgb color conversion" msgstr "hsv 到 rgb 顏色轉換不正確" #: src/main/colors.c:1273 src/main/errors.c:1093 src/main/logic.c:166 msgid "invalid argument type" msgstr "引數類型不正確" #: src/main/colors.c:1277 msgid "unknown palette (need >= 2 colors)" msgstr "沒有這種調色盤 (需要 >= 兩種顏色)" #: src/main/colors.c:1281 msgid "maximum number of colors exceeded" msgstr "顏色的數目已超過最大值" #: src/main/colors.c:1312 src/main/engine.c:2986 msgid "invalid hex digit in 'color' or 'lty'" msgstr "十六進位 'color' 設定或 'lty' 設定不正確" #: src/main/colors.c:1322 src/main/colors.c:1332 msgid "invalid RGB specification" msgstr "RGB 設定不正確" #: src/main/colors.c:1365 #, fuzzy, c-format msgid "invalid color name '%s'" msgstr "顏色名稱不正確" #: src/main/colors.c:1374 #, fuzzy, c-format msgid "invalid color specification '%s'" msgstr "顏色設定不正確" #: src/main/colors.c:1494 msgid "supplied color is not numeric nor character" msgstr "所提供的顏色既非數值亦非字元" #: src/main/colors.c:1526 #, fuzzy msgid "Invalid color specification" msgstr "顏色設定不正確" #: src/main/complex.c:113 msgid "invalid complex unary operator" msgstr "單一複數運算子不正確" #: src/main/complex.c:245 msgid "unimplemented complex operation" msgstr "複數運算目前還沒有實作" #: src/main/complex.c:348 msgid "non-numeric argument to function" msgstr "函數不能有非數值引數" #: src/main/complex.c:798 msgid "invalid polynomial coefficient" msgstr "多項式係數不正確" #: src/main/complex.c:803 msgid "root finding code failed" msgstr "求根運算執行失敗" #: src/main/connections.c:158 msgid "all connections are in use" msgstr "所有連結都已在使用" #: src/main/connections.c:169 msgid "connection not found" msgstr "找不到連結" #: src/main/connections.c:181 msgid "invalid connection" msgstr "連結不正確" #: src/main/connections.c:212 #, c-format msgid "closing unused connection %d (%s)\n" msgstr "" #: src/main/connections.c:236 src/main/sysutils.c:616 src/main/sysutils.c:765 #: src/main/sysutils.c:780 src/main/sysutils.c:874 src/main/sysutils.c:945 #: src/main/sysutils.c:955 src/main/sysutils.c:968 src/main/sysutils.c:1257 #, fuzzy, c-format msgid "unsupported conversion from '%s' to '%s'" msgstr "不支援這種轉換" #: src/main/connections.c:288 src/main/connections.c:304 #: src/main/connections.c:443 src/main/connections.c:449 #: src/main/connections.c:455 src/main/connections.c:466 #: src/main/connections.c:473 #, fuzzy, c-format msgid "%s not enabled for this connection" msgstr "這個連結上不能使用搜索" #: src/main/connections.c:334 src/main/connections.c:351 #: src/main/connections.c:2664 msgid "printing of extremely long output is truncated" msgstr "截短了需要列印的特長輸出" #: src/main/connections.c:373 msgid "invalid char string in output conversion" msgstr "輸出轉換字串不正確" #: src/main/connections.c:426 #, c-format msgid "invalid input found on input connection '%s'" msgstr "輸入連結 '%s' 中的輸入不正確" #: src/main/connections.c:687 msgid "connection is not open for reading" msgstr "連結沒有開啟而不能讀" #: src/main/connections.c:692 msgid "connection is not open for writing" msgstr "連結沒有開啟而不能寫" #: src/main/connections.c:732 src/main/connections.c:1986 msgid "can only truncate connections open for writing" msgstr "只能截短已經開啟之可以寫入的連結" #: src/main/connections.c:737 msgid "file truncation failed" msgstr "未能截短檔案" #: src/main/connections.c:739 msgid "file truncation unavailable on this platform" msgstr "本平台上沒有檔案截短功能" #: src/main/connections.c:785 src/main/connections.c:789 #: src/main/connections.c:795 src/main/connections.c:812 msgid "allocation of file connection failed" msgstr "檔案連結指派失敗" #: src/main/connections.c:862 #, c-format msgid "cannot create fifo '%s', reason '%s'" msgstr "無法建立先進先出 '%s'，原因是 '%s'" #: src/main/connections.c:868 #, c-format msgid "'%s' exists but is not a fifo" msgstr "'%s' 存在但不是先進先出" #: src/main/connections.c:881 #, c-format msgid "fifo '%s' is not ready" msgstr "先進先出 '%s' 還沒有準備好" #: src/main/connections.c:882 #, c-format msgid "cannot open fifo '%s'" msgstr "無法開啟先進先出 '%s'" #: src/main/connections.c:923 src/main/connections.c:934 #: src/main/connections.c:1289 src/main/connections.c:1299 #: src/main/connections.c:1417 src/main/connections.c:1478 #: src/main/connections.c:2003 src/main/connections.c:2019 #: src/main/connections.c:2328 src/main/connections.c:4987 #: src/main/connections.c:5051 #, fuzzy msgid "too large a block specified" msgstr "矩陣: 指定了太多的元素" #: src/main/connections.c:943 src/main/connections.c:947 #: src/main/connections.c:953 src/main/connections.c:969 msgid "allocation of fifo connection failed" msgstr "先進先出連結指派失敗" #: src/main/connections.c:988 src/main/connections.c:1140 #: src/main/connections.c:1755 src/main/connections.c:2952 #: src/main/connections.c:4643 msgid "only first element of 'description' argument used" msgstr "只用了 'description' 引數的第一個元素" #: src/main/connections.c:1005 #, fuzzy msgid "" "fifo(\"\") only supports open = \"w+\" and open = \"w+b\": using the former" msgstr "file(\"\") 只支援 open = \"w+\" 與 open = \"w+b\": 使用前者" #: src/main/connections.c:1018 src/main/connections.c:1176 #: src/main/connections.c:1820 src/main/connections.c:2917 #: src/main/connections.c:2971 src/main/connections.c:3021 #: src/main/connections.c:3296 src/main/connections.c:3401 #: src/main/connections.c:3561 src/main/connections.c:3784 #: src/main/connections.c:4111 src/main/connections.c:4224 #: src/main/connections.c:4433 src/main/connections.c:4777 src/main/dcf.c:57 #: src/main/deparse.c:315 src/main/deparse.c:401 src/main/saveload.c:2255 #: src/main/saveload.c:2335 src/main/scan.c:904 src/main/scan.c:1015 #: src/main/scan.c:1515 src/main/scan.c:1709 src/main/serialize.c:1839 #: src/main/serialize.c:1890 src/main/source.c:260 msgid "cannot open the connection" msgstr "無法開啟連結" #: src/main/connections.c:1035 msgid "fifo connections are not available on this system" msgstr "本系統沒有先進先出連結這個功能" #: src/main/connections.c:1067 #, fuzzy, c-format msgid "cannot open pipe() cmd '%s': %s" msgstr "無法開啟 pipe() 命令 '%s'" #: src/main/connections.c:1218 src/main/connections.c:1548 #, fuzzy, c-format msgid "cannot open compressed file '%s', probable reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/main/connections.c:1261 msgid "whence = \"end\" is not implemented for gzfile connections" msgstr "whence = \"end\" 不適用於 gz 檔案連結" #: src/main/connections.c:1267 msgid "seek on a gzfile connection returned an internal error" msgstr "讀取 gz 檔案連結時內部發生錯誤" #: src/main/connections.c:1308 src/main/connections.c:1312 #: src/main/connections.c:1318 src/main/connections.c:1335 msgid "allocation of gzfile connection failed" msgstr "指派 gz 檔案連結失敗" #: src/main/connections.c:1363 #, fuzzy, c-format msgid "cannot open bzip2-ed file '%s', probable reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/main/connections.c:1372 #, c-format msgid "file '%s' appears not to be compressed by bzip2" msgstr "檔案 '%s' 看起來不象是 bzip2 類別" #: src/main/connections.c:1381 #, c-format msgid "initializing bzip2 compression for file '%s' failed" msgstr "" #: src/main/connections.c:1436 #, fuzzy msgid "allocation of overflow buffer for bzfile failed" msgstr "檔案連結指派失敗" #: src/main/connections.c:1443 #, fuzzy, c-format msgid "" "file '%s' has trailing content that appears not to be compressed by bzip2" msgstr "檔案 '%s' 看起來不象是 bzip2 類別" #: src/main/connections.c:1489 src/main/connections.c:1493 #: src/main/connections.c:1499 src/main/connections.c:1516 msgid "allocation of bzfile connection failed" msgstr "指派 bz 檔案連結失敗" #: src/main/connections.c:1561 src/main/connections.c:5592 #, c-format msgid "cannot initialize lzma decoder, error %d" msgstr "" #: src/main/connections.c:1577 #, c-format msgid "cannot initialize lzma encoder, error %d" msgstr "" #: src/main/connections.c:1705 src/main/connections.c:1709 #: src/main/connections.c:1715 src/main/connections.c:1733 #, fuzzy msgid "allocation of xzfile connection failed" msgstr "指派 gz 檔案連結失敗" #: src/main/connections.c:1792 #, c-format msgid "this is a %s-compressed file which this build of R does not support" msgstr "" #: src/main/connections.c:1887 src/modules/X11/devX11.c:3470 msgid "memory allocation to copy clipboard failed" msgstr "複製剪貼簿時記憶體指派失敗" #: src/main/connections.c:1892 src/modules/X11/devX11.c:3449 #: src/modules/X11/devX11.c:3454 msgid "clipboard cannot be opened or contains no text" msgstr "打不開剪貼簿，或是剪貼簿不含文字" #: src/main/connections.c:1903 msgid "memory allocation to open clipboard failed" msgstr "開啟剪貼簿時記憶體指派失敗" #: src/main/connections.c:1975 msgid "attempt to seek outside the range of the clipboard" msgstr "無法檢索剪貼簿範圍外的內容" #: src/main/connections.c:2017 msgid "clipboard connection is open for reading only" msgstr "開啟了唯讀剪貼簿連結" #: src/main/connections.c:2037 msgid "clipboard buffer is full and output lost" msgstr "剪貼簿緩衝區已滿，輸出資料丟失" #: src/main/connections.c:2058 msgid "'mode' for the clipboard must be 'r' or 'w'" msgstr "剪貼簿 'mode' 必須是 'r' 或 'w'" #: src/main/connections.c:2061 msgid "'mode' for the clipboard must be 'r' on Unix" msgstr "Unix 作業系統上剪貼簿 'mode' 必須是 'r'" #: src/main/connections.c:2064 src/main/connections.c:2070 #: src/main/connections.c:2076 src/main/connections.c:2093 msgid "allocation of clipboard connection failed" msgstr "剪貼簿連結指派失敗" #: src/main/connections.c:2162 src/main/connections.c:2166 #: src/main/connections.c:2172 msgid "allocation of terminal connection failed" msgstr "終端機連結指派失敗" #: src/main/connections.c:2305 msgid "attempting to add too many elements to raw vector" msgstr "" #: src/main/connections.c:2356 #, fuzzy msgid "attempt to seek outside the range of the raw connection" msgstr "無法檢索剪貼簿範圍外的內容" #: src/main/connections.c:2367 src/main/connections.c:2371 #: src/main/connections.c:2377 src/main/connections.c:2403 #, fuzzy msgid "allocation of raw connection failed" msgstr "url 連結指派失敗" #: src/main/connections.c:2457 #, fuzzy msgid "'con' is not a rawConnection" msgstr "'con' 不是個連結" #: src/main/connections.c:2460 #, fuzzy msgid "'con' is not an output rawConnection" msgstr "'con' 不是個連結" #: src/main/connections.c:2496 msgid "cannot allocate memory for text connection" msgstr "無法給文字連結指派記憶體" #: src/main/connections.c:2544 msgid "seek is not relevant for text connection" msgstr "讀取對文字連結無用" #: src/main/connections.c:2552 src/main/connections.c:2556 #: src/main/connections.c:2562 src/main/connections.c:2575 #: src/main/connections.c:2752 src/main/connections.c:2756 #: src/main/connections.c:2762 src/main/connections.c:2775 #: src/main/connections.c:2781 msgid "allocation of text connection failed" msgstr "文字連結指派失敗" #: src/main/connections.c:2729 msgid "text connection: appending to a non-existent char vector" msgstr "文字連結: 不能附加給不存在的字元向量" #: src/main/connections.c:2833 msgid "unsupported mode" msgstr "不支援的狀態" #: src/main/connections.c:2856 #, fuzzy msgid "'con' is not a textConnection" msgstr "'con' 不是個連結" #: src/main/connections.c:2859 #, fuzzy msgid "'con' is not an output textConnection" msgstr "'con' 不是個連結" #: src/main/connections.c:2932 msgid "sockets are not available on this system" msgstr "本系統沒有插槽這個功能" #: src/main/connections.c:3001 src/main/connections.c:3050 #: src/main/connections.c:3061 src/main/connections.c:3108 #: src/main/connections.c:3129 src/main/connections.c:3152 #: src/main/connections.c:3164 src/main/connections.c:3276 #: src/main/connections.c:3386 src/main/connections.c:5090 msgid "'con' is not a connection" msgstr "'con' 不是個連結" #: src/main/connections.c:3004 msgid "cannot open standard connections" msgstr "無法開啟標準連結" #: src/main/connections.c:3006 msgid "connection is already open" msgstr "連結已開啟" #: src/main/connections.c:3039 msgid "unknown 'rw' value" msgstr "不明的 'rw' 值" #: src/main/connections.c:3110 msgid "cannot close standard connections" msgstr "無法關閉標準連結" #: src/main/connections.c:3113 msgid "cannot close output sink connection" msgstr "無法關閉輸出匯集連結" #: src/main/connections.c:3115 msgid "cannot close messages sink connection" msgstr "無法關閉訊息匯集連結" #: src/main/connections.c:3131 src/main/connections.c:4801 #: src/main/serialize.c:1660 src/main/serialize.c:1668 msgid "connection is not open" msgstr "連結沒有開啟" #: src/main/connections.c:3224 src/main/connections.c:3236 msgid "Line longer than buffer size" msgstr "列長大於緩衝區" #: src/main/connections.c:3303 src/main/connections.c:3305 #: src/main/connections.c:3569 src/main/connections.c:4095 #: src/main/connections.c:4119 src/main/dcf.c:64 src/main/scan.c:907 #: src/main/scan.c:911 src/main/scan.c:1018 src/main/scan.c:1022 #: src/main/serialize.c:1662 src/main/source.c:267 msgid "cannot read from this connection" msgstr "無法從此連結讀取" #: src/main/connections.c:3317 src/main/connections.c:3336 msgid "cannot allocate buffer in readLines" msgstr "無法給 readLines 指派緩衝區" #: src/main/connections.c:3358 #, fuzzy, c-format msgid "incomplete final line found on '%s'" msgstr "readLines 讀 '%s' 時最後一列未完成" #: src/main/connections.c:3364 msgid "too few lines read in readLines" msgstr "readLines 讀的列數不夠" #: src/main/connections.c:3467 msgid "incomplete string at end of file has been discarded" msgstr "忽略檔案末端不完整的字串" #: src/main/connections.c:3473 #, fuzzy msgid "null terminator not found: breaking string at 10000 bytes" msgstr "沒有 null 終止符: 字串截斷於 10000 個位元組" #: src/main/connections.c:3537 msgid "can only read from a binary connection" msgstr "無法讀取二進位連結" #: src/main/connections.c:3586 src/main/connections.c:3865 msgid "size changing is not supported for complex vectors" msgstr "不支援複數向量大小的變更" #: src/main/connections.c:3611 src/main/connections.c:3629 #: src/main/connections.c:3655 src/main/connections.c:3699 #: src/main/connections.c:3719 src/main/connections.c:3846 #: src/main/connections.c:3859 src/main/connections.c:3918 #: src/main/connections.c:3950 #, c-format msgid "size %d is unknown on this machine" msgstr "本系統沒有 %d 這樣大小的值" #: src/main/connections.c:3640 msgid "raw is always of size 1" msgstr "raw 的大小只能是 1" #: src/main/connections.c:3749 msgid "'x' is not an atomic vector type" msgstr "'x' 非基元向量類型" #: src/main/connections.c:3755 msgid "can only write to a binary connection" msgstr "只能寫入二進位連結" #: src/main/connections.c:3774 #, fuzzy msgid "only 2^31-1 bytes can be written to a raw vector" msgstr "只有 ascii 格式才能對文字狀態的連結進行寫入" #: src/main/connections.c:3776 msgid "only 2^31-1 bytes can be written in a single readBin() call" msgstr "" #: src/main/connections.c:3825 src/main/connections.c:3978 #: src/main/connections.c:4251 src/main/connections.c:4291 msgid "problem writing to connection" msgstr "寫入連結有問題" #: src/main/connections.c:3870 msgid "size changing is not supported for raw vectors" msgstr "不支援純量向量大小的變更" #: src/main/connections.c:4013 src/main/connections.c:4017 #: src/main/connections.c:4056 msgid "invalid UTF-8 input in readChar()" msgstr "readChar() 的 UTF-8 輸入不正確" #: src/main/connections.c:4122 msgid "can only read in bytes in a non-UTF-8 MBCS locale" msgstr "" #: src/main/connections.c:4191 #, fuzzy msgid "'object' is too short" msgstr "目的物件不是次集合表格" #: src/main/connections.c:4240 #, fuzzy msgid "writeChar: more bytes requested than are in the string - will zero-pad" msgstr "writeChar：字串的長度比需要的位元組數目短 - 用零來補上" #: src/main/connections.c:4265 msgid "" "writeChar: more characters requested than are in the string - will zero-pad" msgstr "writeChar：字串的長度比需要的位元組數目短 - 用零來補上" #: src/main/connections.c:4325 src/main/connections.c:4328 #: src/main/connections.c:4366 src/main/connections.c:4371 msgid "could not allocate space for pushBack" msgstr "無法為 pushBack 指派空間" #: src/main/connections.c:4355 msgid "can only push back on open readable connections" msgstr "只能推回已開啟的可讀連結" #: src/main/connections.c:4357 msgid "can only push back on text-mode connections" msgstr "只能推回文字狀態的連結" #: src/main/connections.c:4418 src/main/connections.c:4488 msgid "sink stack is full" msgstr "匯集堆疊已滿" #: src/main/connections.c:4421 msgid "cannot switch output to stdin" msgstr "無法將輸出轉往stdin" #: src/main/connections.c:4448 msgid "no sink to remove" msgstr "沒有可以除去的匯集" #: src/main/connections.c:4570 #, fuzzy, c-format msgid "there is no connection %d" msgstr "'file' 不是連結" #: src/main/connections.c:4705 msgid "" "file(\"\") only supports open = \"w+\" and open = \"w+b\": using the former" msgstr "file(\"\") 只支援 open = \"w+\" 與 open = \"w+b\": 使用前者" #: src/main/connections.c:4759 src/modules/internet/internet.c:113 #: src/modules/internet/internet.c:568 msgid "unsupported URL scheme" msgstr "不支援這種 URL 方案" #: src/main/connections.c:4854 msgid "file stream does not have gzip magic number" msgstr "檔案串流沒有 gzip 魔術數字" #: src/main/connections.c:4865 msgid "file stream does not have valid gzip header" msgstr "檔案串流的 gzip 表頭不正確" #: src/main/connections.c:4930 msgid "writing error whilst flushing 'gzcon' connection" msgstr "清除 'gzcon' 連結時寫入發生錯誤" #: src/main/connections.c:5033 #, c-format msgid "crc error %x %x\n" msgstr "crc 錯誤 %x %x\n" #: src/main/connections.c:5060 msgid "write error on 'gzcon' connection" msgstr "'gzcon' 連結寫入發生錯誤" #: src/main/connections.c:5094 msgid "'level' must be one of 0 ... 9" msgstr "'level' 必須是 0...9 之一" #: src/main/connections.c:5097 msgid "'allowNonCompression' must be TRUE or FALSE" msgstr "'allowNonCompression' 的值必須是 TRUE 或是 FALSE" #: src/main/connections.c:5100 msgid "this is already a gzcon connection" msgstr "這已經是 gzcon 連結" #: src/main/connections.c:5106 msgid "can only use read- or write- binary connections" msgstr "只用讀或寫的二元連結" #: src/main/connections.c:5109 msgid "using a text-mode 'file' connection may not work correctly" msgstr "使用某個文字模式 'file' 連結可能不會正確作用" #: src/main/connections.c:5112 msgid "" "cannot create a gzcon connection from a writable textConnection; maybe use " "rawConnection" msgstr "" #: src/main/connections.c:5115 src/main/connections.c:5119 #: src/main/connections.c:5126 src/main/connections.c:5140 msgid "allocation of 'gzcon' connection failed" msgstr "指派 'gzcon' 連結失敗" #: src/main/connections.c:5300 msgid "not a list of sockets" msgstr "非插槽串列" #: src/main/connections.c:5305 msgid "bad write indicators" msgstr "寫入指示器不正確" #: src/main/connections.c:5316 msgid "not a socket connection" msgstr "非插槽連結" #: src/main/connections.c:5537 msgid "unknown compression, assuming none" msgstr "" #: src/main/context.c:125 msgid "" "bad target context--should NEVER happen;\n" "please bug.report() [R_run_onexits]" msgstr "" "目的上下文發生錯誤，這不應該發生；\n" "請用 bug.report() [R_run_onexits]" #: src/main/context.c:283 #, fuzzy msgid "no loop for break/next, jumping to top level" msgstr "沒有可插斷的循環, 跳到最高層" #: src/main/context.c:291 msgid "no function to return from, jumping to top level" msgstr "沒有可回返的函數, 跳到最高層" #: src/main/context.c:303 msgid "target context is not on the stack" msgstr "目的上下文不在堆疊上" #: src/main/context.c:325 src/main/context.c:341 src/main/context.c:408 #: src/main/context.c:429 src/main/context.c:441 src/main/context.c:453 msgid "not that many frames on the stack" msgstr "堆疊上沒有這麼多的框格" #: src/main/context.c:358 msgid "only positive values of 'n' are allowed" msgstr "'n' 只允許是正數" #: src/main/context.c:479 msgid "no function to restart" msgstr "沒有重新開始的功能" #: src/main/context.c:516 #, fuzzy msgid "number of contexts must be positive" msgstr "'maxiter' 必須是正數" #: src/main/context.c:529 msgid "no browser context to query" msgstr "" #: src/main/context.c:547 #, fuzzy msgid "not that many calls to browser are active" msgstr "堆疊上沒有這麼多的框格" #: src/main/context.c:561 #, fuzzy msgid "not that many functions on the call stack" msgstr "堆疊上沒有這麼多的框格" #: src/main/context.c:646 msgid "internal error in 'do_sys'" msgstr "內部錯誤 'do_sys'" #: src/main/cov.c:540 msgid "missing observations in cov/cor" msgstr "cov/cor 中有漏失值" #: src/main/cov.c:624 #, fuzzy msgid "'x' is NULL" msgstr "'x' 是空的" #: src/main/cov.c:645 src/main/cov.c:651 msgid "incompatible dimensions" msgstr "不相容的維度" #: src/main/cov.c:672 src/main/cov.c:713 src/main/cov.c:746 msgid "no complete element pairs" msgstr "" #: src/main/cov.c:685 msgid "invalid 'use' (computational method)" msgstr "'use' 不正確 (計算方法)" #: src/main/cov.c:688 msgid "'x' is empty" msgstr "'x' 是空的" #: src/main/cov.c:782 msgid "the standard deviation is zero" msgstr "標準差為零" #: src/main/cum.c:49 #, fuzzy msgid "Integer overflow in 'cumsum'; use 'cumsum(as.numeric(.))'" msgstr "sum(.) 中整數上溢；請用 sum(as.numeric(.))" #: src/main/cum.c:182 msgid "min/max not defined for complex numbers" msgstr "min/max 不能適用於複數" #: src/main/cum.c:185 src/main/cum.c:206 src/main/cum.c:229 msgid "unknown cumxxx function" msgstr "不明的 cumxxx 功能" #: src/main/datetime.c:514 src/main/datetime.c:520 src/main/datetime.c:534 #: src/main/datetime.c:539 #, fuzzy msgid "problem with setting timezone" msgstr "寫入連結有問題" #: src/main/datetime.c:524 msgid "cannot set timezones on this system" msgstr "無法為本系統設定時區" #: src/main/datetime.c:546 src/main/datetime.c:548 #, fuzzy msgid "problem with unsetting timezone" msgstr "啟動編輯器 %s 時出了問題" #: src/main/datetime.c:684 src/main/datetime.c:686 src/main/datetime.c:1077 #: src/main/datetime.c:1079 msgid "zero length component in non-empty POSIXlt structure" msgstr "非空的 POSIXlt 結構內含長度為零的成分" #: src/main/dcf.c:71 src/main/dcf.c:129 src/main/dcf.c:182 msgid "could not allocate memory for 'read.dcf'" msgstr "無法為 'read.dcf' 指派記憶體" #: src/main/dcf.c:113 #, c-format msgid "Found continuation line starting '%s ...' at begin of record." msgstr "" #: src/main/dcf.c:197 #, c-format msgid "Line starting '%s ...' is malformed!" msgstr "" #: src/main/debug.c:43 #, fuzzy msgid "argument must be a closure" msgstr "第二引數必須是函數" #: src/main/debug.c:74 #, fuzzy msgid "argument must be a function" msgstr "第二引數必須是函數" #: src/main/debug.c:127 src/main/debug.c:161 src/main/debug.c:219 #, fuzzy msgid "argument must not be a function" msgstr "第二引數必須是函數" #: src/main/debug.c:130 msgid "cannot trace NULL" msgstr "" #: src/main/debug.c:134 msgid "'tracemem' is not useful for promise and environment objects" msgstr "" #: src/main/debug.c:137 msgid "'tracemem' is not useful for weak reference or external pointer objects" msgstr "" #: src/main/debug.c:143 src/main/debug.c:166 msgid "R was not compiled with support for memory profiling" msgstr "" #: src/main/deparse.c:150 src/main/plot.c:912 src/main/plot.c:1448 #: src/main/plot.c:1771 src/main/plot.c:1839 src/main/plot.c:1917 #: src/main/plot.c:1986 src/main/plot.c:2062 src/main/plot.c:2160 #: src/main/plot.c:2238 src/main/plot.c:2519 src/main/plot.c:2697 #: src/main/plot.c:2916 src/main/plot.c:3460 src/main/plot.c:3588 #: src/main/plot.c:3667 src/main/plot.c:3836 src/main/plot.c:4113 #: src/main/plot3d.c:1343 src/main/sprintf.c:211 src/main/sprintf.c:243 msgid "too few arguments" msgstr "引數數目太少" #: src/main/deparse.c:157 msgid "invalid 'cutoff' for deparse, using default" msgstr "deparse的 'cutoff' 值不正確，用預設值" #: src/main/deparse.c:236 msgid "deparse of an S4 object will not be source()able" msgstr "" #: src/main/deparse.c:238 msgid "deparse may be incomplete" msgstr "deparse 可能不完整" #: src/main/deparse.c:240 msgid "deparse may be not be source()able in R < 2.7.0" msgstr "" #: src/main/deparse.c:332 src/main/deparse.c:424 src/main/deparse.c:430 msgid "wrote too few characters" msgstr "字元寫得不夠" #: src/main/deparse.c:354 msgid "character arguments expected" msgstr "需要字元引數" #: src/main/deparse.c:357 msgid "zero length argument" msgstr "引數長度為零" #: src/main/deparse.c:364 #, fuzzy msgid "'opts' should be small non-negative integer" msgstr "'gap' 必須是正整數" #: src/main/deparse.c:374 src/main/envir.c:1668 src/main/envir.c:1750 #: src/main/eval.c:423 src/main/eval.c:1048 src/main/eval.c:3110 #: src/main/saveload.c:1966 src/main/saveload.c:2297 src/main/serialize.c:2373 #, c-format msgid "object '%s' not found" msgstr "找不到目的物件 '%s'" #: src/main/deparse.c:1433 msgid "badly formed function expression" msgstr "不當形式的函數敘述" #: src/main/deriv.c:119 msgid "invalid form in unary minus check" msgstr "檢查一元減號時發現形式不正確" #: src/main/deriv.c:526 #, c-format msgid "Function '%s' is not in the derivatives table" msgstr "微分表中沒有這個函數 '%s'" #: src/main/deriv.c:633 msgid "variable must be a character string" msgstr "變數必須是字串" #: src/main/deriv.c:635 src/main/envir.c:1517 msgid "only the first element is used as variable name" msgstr "只用了第一個元素做為變數名" #: src/main/deriv.c:648 #, fuzzy, c-format msgid "invalid expression in '%s'" msgstr "\"%s\" 的運算式不正確" #: src/main/deriv.c:923 src/main/model.c:1319 msgid "invalid variable names" msgstr "變數名稱不正確" #: src/main/deriv.c:932 msgid "invalid tag" msgstr "標籤不正確" #: src/main/devices.c:154 src/main/devices.c:161 msgid "no active or default device" msgstr "沒有在使用中的或預設的裝置" #: src/main/devices.c:357 msgid "argument must have positive length" msgstr "引數的長度必須是正數" #: src/main/devices.c:432 src/main/devices.c:494 msgid "too many open devices" msgstr "太多已經開啟的裝置" #: src/main/devices.c:521 #, fuzzy msgid "not enough memory to allocate device (in GEcreateDevDesc)" msgstr "指派裝置記憶體不足 (於 addDevice)" #: src/main/devices.c:568 msgid "Hit to see next plot: " msgstr "按 鍵來看下一張圖: " #: src/main/dotcode.c:107 src/main/dotcode.c:137 msgid "NULL value passed as symbol address" msgstr "NULL 值被當作符號位址" #: src/main/dotcode.c:142 src/main/dotcode.c:212 #, fuzzy, c-format msgid "symbol '%s' is too long" msgstr "DLLname '%s' 太長" #: src/main/dotcode.c:160 msgid "'name' must be a string (of length 1) or native symbol reference" msgstr "'name' 必須是字串 (長度為 1) 或是原生符號參照" #: src/main/dotcode.c:199 src/main/dotcode.c:822 msgid "too many arguments in foreign function call" msgstr "外接函數呼叫時引數太多" #: src/main/dotcode.c:241 #, c-format msgid "%s symbol name \"%s\" not in DLL for package \"%s\"" msgstr "套件 \"%3$s\" 的 DLL 中沒有 %1$s 的符號名稱 \"%2$s\"" #: src/main/dotcode.c:245 #, c-format msgid "%s symbol name \"%s\" not in load table" msgstr "載入表中沒有 %s 的符號名稱 \"%s\"" #: src/main/dotcode.c:307 #, c-format msgid "" "explicit request not to duplicate arguments in call to '%s', but argument %d " "is of the wrong type (%d != %d)" msgstr "呼叫 '%s' 時明確要求不要複製引數，但引數 %d 的類型不正確 (%d != %d)" #: src/main/dotcode.c:333 #, c-format msgid "NAs in foreign function call (arg %d)" msgstr "外部函數呼叫時不能有 NA (引數 %d)" #: src/main/dotcode.c:347 #, c-format msgid "NA/NaN/Inf in foreign function call (arg %d)" msgstr "外部函數呼叫時不能有 NA/NaN/Inf (引數 %d)" #: src/main/dotcode.c:369 #, c-format msgid "complex NA/NaN/Inf in foreign function call (arg %d)" msgstr "外部函數呼叫時不能有複數的 NA/NaN/Inf (引數 %d)" #: src/main/dotcode.c:379 msgid "character variables must be duplicated in .C/.Fortran" msgstr "在呼叫 .C/.Fortran 時字元變數必須被複製" #: src/main/dotcode.c:384 msgid "only first string in char vector used in .Fortran" msgstr ".Fortran 只用了位元組向量中的第一個字串" #: src/main/dotcode.c:397 src/main/dotcode.c:523 #, c-format msgid "unsupported encoding '%s'" msgstr "不支援這個編碼 '%s'" #: src/main/dotcode.c:412 #, c-format msgid "conversion problem in re-encoding to '%s'" msgstr "轉換編碼 '%s' 時出了問題" #: src/main/dotcode.c:430 #, fuzzy msgid "lists must be duplicated in .C" msgstr "在呼叫 .C/.Fortran 時字元變數必須被複製" #: src/main/dotcode.c:440 src/main/dotcode.c:452 #, c-format msgid "invalid mode to pass to Fortran (arg %d)" msgstr "傳給 Fortran 的狀態發生錯誤 (引數 %d)" #: src/main/dotcode.c:537 #, c-format msgid "conversion problem in re-encoding from '%s'" msgstr "轉換編碼成 '%s' 出了問題" #: src/main/dotcode.c:603 msgid "NAOK used more than once" msgstr "NAOK 被使用超過一次" #: src/main/dotcode.c:607 msgid "DUP used more than once" msgstr "DUP 被使用超過一次" #: src/main/dotcode.c:613 msgid "DLL name is too long" msgstr "DLL 的名稱太長" #: src/main/dotcode.c:616 src/main/dotcode.c:676 src/main/dotcode.c:682 msgid "PACKAGE used more than once" msgstr "PACKAGE 被使用超過一次" #: src/main/dotcode.c:655 msgid "PACKAGE argument must be a single character string" msgstr "PACKAGE 引數必須是單字元字串" #: src/main/dotcode.c:661 msgid "PACKAGE argument is too long" msgstr "PACKAGE 引數太長" #: src/main/dotcode.c:705 src/main/dotcode.c:713 msgid "ENCODING used more than once" msgstr "ENCODING 被使用超過一次" #: src/main/dotcode.c:707 src/main/dotcode.c:715 msgid "ENCODING argument must be a single character string" msgstr "ENCODING 引數必須是單字元字串" #: src/main/dotcode.c:732 msgid "no arguments supplied" msgstr "沒有提供引數" #: src/main/dotcode.c:733 src/main/seq.c:642 msgid "too many arguments" msgstr "引數太多" #: src/main/dotcode.c:786 src/main/dotcode.c:829 src/main/dotcode.c:1657 #, fuzzy, c-format msgid "Incorrect number of arguments (%d), expecting %d for '%s'" msgstr "引數數目不正確 (%1$d), %3$s 只需要 %2$d 個引數" #: src/main/dotcode.c:1486 src/main/dotcode.c:2289 msgid "too many arguments, sorry" msgstr "對不起，引數太多" #: src/main/dotcode.c:1518 src/main/dotcode.c:1535 msgid "Invalid graphics state" msgstr "繪圖狀態發生錯誤" #: src/main/dotcode.c:1608 msgid "NULL value for DLLInfoReference when looking for DLL" msgstr "尋找 DLL 時 DLLInfoReference 的值是 NULL" #: src/main/dotcode.c:1682 #, c-format msgid "Wrong type for argument %d in call to %s" msgstr "呼叫 %2$s 時引數 %1$d 的類型不正確" #: src/main/dotcode.c:2383 #, c-format msgid "type \"%s\" not supported in interlanguage calls" msgstr "語言間呼叫不支援此一類型 \"%s\"" #: src/main/dotcode.c:2395 msgid "invalid function in call_R" msgstr "call_R 中的函數不正確" #: src/main/dotcode.c:2397 msgid "invalid argument count in call_R" msgstr "call_R 的引數數目不正確" #: src/main/dotcode.c:2399 msgid "invalid return value count in call_R" msgstr "call_R 的回傳值數目不正確" #: src/main/dotcode.c:2433 #, c-format msgid "mode '%s' is not supported in call_R" msgstr "call_R 不支援 '%s' 型式" #: src/main/dounzip.c:119 #, fuzzy, c-format msgid " not overwriting file '%s" msgstr "無法開啟檔案 '%s'" #: src/main/dounzip.c:198 #, fuzzy, c-format msgid "zip file '%s' cannot be opened" msgstr "無法載入 lapack 例行程式" #: src/main/dounzip.c:250 msgid "invalid zip name argument" msgstr "zip 名稱引數不正確" #: src/main/dounzip.c:253 src/main/dounzip.c:342 msgid "zip path is too long" msgstr "zip 路徑太長" #: src/main/dounzip.c:270 #, fuzzy msgid "'exdir' is too long" msgstr "'destination' 太長" #: src/main/dounzip.c:273 #, fuzzy msgid "'exdir' does not exist" msgstr "選單不存在" #: src/main/dounzip.c:297 msgid "requested file not found in the zip file" msgstr "您所要求的檔案在 zip 檔案中沒有" #: src/main/dounzip.c:300 msgid "zip file is corrupt" msgstr "zip 檔案有損壞" #: src/main/dounzip.c:303 msgid "CRC error in zip file" msgstr "zip 檔案出現 CRC 錯誤" #: src/main/dounzip.c:307 msgid "internal error in unz code" msgstr "unz 程式碼中有內部錯誤" #: src/main/dounzip.c:310 msgid "write error in extracting from zip file" msgstr "抽取 zip 檔案時出了寫入錯誤" #: src/main/dounzip.c:313 #, c-format msgid "error %d in extracting from zip file" msgstr "從 zip 檔案中解開 %d 時發生錯誤" #: src/main/dounzip.c:337 msgid "unz connections can only be opened for reading" msgstr "unz 連結可讀不可寫" #: src/main/dounzip.c:348 msgid "invalid description of unz connection" msgstr "unz 連結的描述不正確" #: src/main/dounzip.c:354 #, c-format msgid "cannot open zip file '%s'" msgstr "無法開啟 zip 檔案 '%s'" #: src/main/dounzip.c:358 #, c-format msgid "cannot locate file '%s' in zip file '%s'" msgstr "找不到在 zip 檔案 '%2$s' 中的 %1$s 檔案" #: src/main/dounzip.c:402 msgid "printing not enabled for this connection" msgstr "此連結無法列印" #: src/main/dounzip.c:409 msgid "write not enabled for this connection" msgstr "無法寫入這個連結" #: src/main/dounzip.c:429 src/main/dounzip.c:433 src/main/dounzip.c:439 #: src/main/dounzip.c:456 msgid "allocation of unz connection failed" msgstr "指派 unz 連結失敗" #: src/main/dstruct.c:89 msgid "invalid formal arguments for \"function\"" msgstr "\"function\" 的正式引數不正確" #: src/main/dstruct.c:101 msgid "" "invalid body argument for \"function\"\n" "Should NEVER happen; please bug.report() [mkCLOSXP]" msgstr "" "\"function\" 主體引數不正確。這不應該發生，請用 bug.report() [mkCLOSXP]" #: src/main/engine.c:39 msgid "Graphics API version mismatch" msgstr "繪圖 API 版本不相符" #: src/main/engine.c:112 src/main/engine.c:117 src/main/engine.c:181 msgid "unable to allocate memory (in GEregister)" msgstr "無法指派記憶體 (於 GEregister)" #: src/main/engine.c:152 msgid "too many graphics systems registered" msgstr "登記了太多的繪圖系統" #: src/main/engine.c:199 msgid "no graphics system to unregister" msgstr "沒有可以取消登記的繪圖系統" #: src/main/engine.c:434 src/main/engine.c:439 src/main/engine.c:447 #: src/main/engine.c:454 src/main/engine.c:468 src/modules/X11/devX11.c:988 msgid "invalid line end" msgstr "列終點發生錯誤" #: src/main/engine.c:499 src/main/engine.c:504 src/main/engine.c:512 #: src/main/engine.c:519 src/main/engine.c:533 src/modules/X11/devX11.c:1006 msgid "invalid line join" msgstr "列接合發生錯誤" #: src/main/engine.c:787 msgid "out of memory while clipping polyline" msgstr "剪裁多邊形的時候記憶體不足" #: src/main/engine.c:1377 #, fuzzy msgid "Invalid graphics path" msgstr "繪圖狀態發生錯誤" #: src/main/engine.c:1616 #, c-format msgid "font face %d not supported for font family '%s'" msgstr "字模家族 '%2$s' 中沒有字模 %1$d" #: src/main/engine.c:1928 msgid "no graphics device is active" msgstr "沒有活動中的繪圖裝置" #: src/main/engine.c:2006 #, fuzzy, c-format msgid "pch value '%d' is invalid in this locale" msgstr "'pattern' 的值在本語言環境下不正確" #: src/main/engine.c:2263 #, c-format msgid "unimplemented pch value '%d'" msgstr "尚未實作pch '%d' 的值" #: src/main/engine.c:2286 #, c-format msgid "invalid axis extents [GEPretty(.,.,n=%d)" msgstr "座標範圍不正確 [GEPretty(.,.,n=%d)" #: src/main/engine.c:2290 #, c-format msgid "infinite axis extents [GEPretty(%g,%g,%d)]" msgstr "無限的座標範圍值 [GEPretty(%g,%g,%d)]" #: src/main/engine.c:2328 #, c-format msgid " .. GEPretty(.): new *lo = %g < %g = x1" msgstr " .. GEPretty(.): new *lo =%g <%g = x1" #: src/main/engine.c:2330 #, c-format msgid " .. GEPretty(.): new *up = %g > %g = x2" msgstr " .. GEPretty(.): new *up =%g >%g = x2" #: src/main/engine.c:2659 msgid "Display list redraw incomplete" msgstr "顯示串列重新整理時不完整" #: src/main/engine.c:2843 msgid "'expr' argument must be an expression" msgstr "'expr' 引數必須是運算式" #: src/main/engine.c:2845 msgid "'list' argument must be a list" msgstr "'list' 引數必須是串列" #: src/main/engine.c:2851 msgid "'env' argument must be an environment" msgstr "'env' 引數必須是環境物件" #: src/main/engine.c:2873 src/main/graphics.c:2395 msgid "invalid graphics state" msgstr "繪圖狀態不正確" #: src/main/engine.c:2931 src/main/engine.c:2939 msgid "invalid multibyte char in pch=\"c\"" msgstr "pch=\"c\" 中的多位元組字元不正確" #: src/main/engine.c:3009 msgid "invalid line type: must be length 2, 4, 6 or 8" msgstr "無效的列類型: 長度必須是 2, 4, 6 或 8" #: src/main/engine.c:3013 #, fuzzy msgid "invalid line type: zeroes are not allowed" msgstr "不允許負長度的向量" #: src/main/engine.c:3022 src/main/engine.c:3030 src/main/engine.c:3037 msgid "invalid line type" msgstr "無效的列類型" #: src/main/envir.c:111 src/main/envir.c:123 #, fuzzy, c-format msgid "cannot change value of locked binding for '%s'" msgstr "無法變更鎖定繫結的值" #: src/main/envir.c:228 src/main/envir.c:1362 msgid "cannot add bindings to a locked environment" msgstr "無法給鎖定環境加上繫結" #: src/main/envir.c:719 msgid "invalid cached value in R_GetGlobalCache" msgstr "R_GetGlobalCache 中的快取值不正確" #: src/main/envir.c:773 msgid "cannot unbind in the base namespace" msgstr "無法在基本命名空間中切斷繫結" #: src/main/envir.c:775 #, fuzzy msgid "unbind in the base environment is unimplemented" msgstr "無法在基本環境中切斷繫結" #: src/main/envir.c:777 src/main/envir.c:1590 msgid "cannot remove bindings from a locked environment" msgstr "無法從鎖定的環境中刪除繫結" #: src/main/envir.c:1069 #, fuzzy, c-format msgid "argument to '%s' is not an environment" msgstr "用於 %s 的引數不是環境物件" #: src/main/envir.c:1229 #, c-format msgid "The ... list does not contain %d elements" msgstr "... 串列不包含 %d 個元素" #: src/main/envir.c:1231 #, c-format msgid "..%d used in an incorrect context, no ... to look in" msgstr "..%d 所用的上下文發生錯誤, 找不到..." #: src/main/envir.c:1302 src/main/envir.c:1746 src/main/eval.c:427 #: src/main/eval.c:3114 #, c-format msgid "argument \"%s\" is missing, with no default" msgstr "缺少引數 \"%s\"，也沒有預設值" #: src/main/envir.c:1307 #, c-format msgid "could not find function \"%s\"" msgstr "沒有這個函數 \"%s\"" #: src/main/envir.c:1330 msgid "cannot assign values in the empty environment" msgstr "無法在空環境中指定值" #: src/main/envir.c:1336 src/main/envir.c:1405 msgid "cannot assign variables to this database" msgstr "無法給這個資料庫指定變數" #: src/main/envir.c:1488 #, fuzzy, c-format msgid "cannot add binding of '%s' to the base environment" msgstr "無法給鎖定環境加上繫結" #: src/main/envir.c:1549 #, fuzzy msgid "first argument must be a named list" msgstr "第一個引數必須是串列" #: src/main/envir.c:1554 #, fuzzy msgid "names(x) must be a character vector of the same length as x" msgstr "'hostname' 必須是長度為 1 的字元向量" #: src/main/envir.c:1584 msgid "cannot remove variables from base namespace" msgstr "無法從基本名稱空間刪除變數" #: src/main/envir.c:1586 #, fuzzy msgid "cannot remove variables from the base environment" msgstr "無法從空環境中刪除變數" #: src/main/envir.c:1588 msgid "cannot remove variables from the empty environment" msgstr "無法從空環境中刪除變數" #: src/main/envir.c:1596 msgid "cannot remove variables from this database" msgstr "無法從這個資料庫中刪除變數" #: src/main/envir.c:1753 #, fuzzy, c-format msgid "object '%s' of mode '%s' was not found" msgstr "沒有狀態是 \"%2$s\" 的變數 \"%1$s\"" #: src/main/envir.c:1826 #, c-format msgid "invalid name in position %d" msgstr "在 %d 位置的名稱不正確" #: src/main/envir.c:1834 msgid "second argument must be an environment" msgstr "第二引數必須是環境物件" #: src/main/envir.c:1842 src/main/envir.c:1850 #, fuzzy, c-format msgid "wrong length for '%s' argument" msgstr "'mode' 引數的長度不正確" #: src/main/envir.c:1985 #, fuzzy msgid "invalid use of 'missing'" msgstr "missing 的使用方式不正確" #: src/main/envir.c:2010 #, fuzzy msgid "'missing' can only be used for arguments" msgstr "missing 只能用於這些引數" #: src/main/envir.c:2091 #, fuzzy msgid "'pos' must be an integer" msgstr "'a' 和 'b' 的值必須是有限的" #: src/main/envir.c:2105 #, fuzzy msgid "all elements of a list must be named" msgstr "attach: 所有的元素都必須有名稱" #: src/main/envir.c:2128 #, fuzzy msgid "'attach' only works for lists, data frames and environments" msgstr "attach 只適用於串列和資料框" #: src/main/envir.c:2211 msgid "detaching \"package:base\" is not allowed" msgstr "\"package:base\" 不能被拆離" #: src/main/envir.c:2512 src/main/envir.c:2567 msgid "argument must be an environment" msgstr "引數必須是環境物件" #: src/main/envir.c:2571 msgid "arguments must be symbolic" msgstr "引數必須為符號" #: src/main/envir.c:2685 src/main/random.c:34 src/main/random.c:568 msgid "invalid arguments" msgstr "引數不正確" #: src/main/envir.c:2743 msgid "no enclosing environment" msgstr "沒有封閉的環境" #: src/main/envir.c:2793 #, c-format msgid "no item called \"%s\" on the search list" msgstr "搜尋串列中沒有所謂的 \"%s\" 項目" #: src/main/envir.c:2816 msgid "using 'as.environment(NULL)' is defunct" msgstr "'as.environment(NULL)' 已廢止使用" #: src/main/envir.c:2822 #, fuzzy msgid "S4 object does not extend class \"environment\"" msgstr "替換目的物件不是環境物件" #: src/main/envir.c:2837 #, fuzzy msgid "invalid object for 'as.environment'" msgstr "as.environment 的目的物件不正確" #: src/main/envir.c:2863 src/main/envir.c:2891 src/main/envir.c:2920 #: src/main/envir.c:2941 src/main/envir.c:2964 src/main/envir.c:2999 #: src/main/envir.c:3020 msgid "not an environment" msgstr "不是環境物件" #: src/main/envir.c:2915 src/main/envir.c:2936 src/main/envir.c:2957 #: src/main/envir.c:2994 src/main/envir.c:3015 src/main/envir.c:3114 msgid "not a symbol" msgstr "不是符號" #: src/main/envir.c:2928 src/main/envir.c:2949 src/main/envir.c:3007 #: src/main/envir.c:3028 #, c-format msgid "no binding for \"%s\"" msgstr "沒有 \"%s\" 繫結" #: src/main/envir.c:2959 msgid "not a function" msgstr "不是函數" #: src/main/envir.c:2967 src/main/envir.c:2983 msgid "symbol already has a regular binding" msgstr "符號已經有了正式繫結" #: src/main/envir.c:2969 src/main/envir.c:2985 #, fuzzy msgid "cannot change active binding if binding is locked" msgstr "無法變更鎖定繫結的值" #: src/main/envir.c:3073 msgid "unknown op" msgstr "沒有這種運算子" #: src/main/envir.c:3118 msgid "cannot unbind a locked binding" msgstr "無法切斷已經鎖定的繫結" #: src/main/envir.c:3120 msgid "cannot unbind an active binding" msgstr "無法切斷正在使用中的繫結" #: src/main/envir.c:3255 msgid "bad name space name" msgstr "不當的名稱空間名稱" #: src/main/envir.c:3267 msgid "name space already registered" msgstr "名稱空間已經登記" #: src/main/envir.c:3279 msgid "name space not registered" msgstr "名稱空間沒有登記" #: src/main/envir.c:3326 msgid "bad import environment argument" msgstr "不當導入環境引數" #: src/main/envir.c:3331 msgid "bad export environment argument" msgstr "不當導出環境引數" #: src/main/envir.c:3335 msgid "length of import and export names must match" msgstr "導入和導出名稱的長度必須相等" #: src/main/envir.c:3358 #, c-format msgid "exported symbol '%s' has no value" msgstr "導出的符號 '%s' 沒有值" #: src/main/envir.c:3541 #, fuzzy, c-format msgid "unknown encoding: %d" msgstr "不支援這個編碼 '%s'" #: src/main/envir.c:3558 #, c-format msgid "embedded nul in string: '%s'" msgstr "" #: src/main/errors.c:147 src/main/errors.c:184 msgid "interrupts suspended; signal ignored" msgstr "暫停被中斷; 信號忽略不用" #: src/main/errors.c:277 msgid "invalid option \"warning.expression\"" msgstr "\"warning.expression\" 選項不正確" #: src/main/errors.c:307 #, c-format msgid "(converted from warning) %s" msgstr "(從警告轉換成) %s" #: src/main/errors.c:318 #, fuzzy, c-format msgid "Warning: %s\n" msgstr "警告: " #: src/main/errors.c:321 src/main/errors.c:323 #, fuzzy, c-format msgid "Warning in %s : %s\n" msgstr "%s 中的警告: " #: src/main/errors.c:325 #, fuzzy, c-format msgid "" "Warning in %s :\n" " %s\n" msgstr "%s 中的警告: " #: src/main/errors.c:389 src/main/errors.c:407 src/main/errors.c:535 msgid "Lost warning messages\n" msgstr "警告訊息遺失\n" #: src/main/errors.c:419 #, fuzzy msgid "Warning message:\n" msgid_plural "Warning messages:\n" msgstr[0] "警告訊息遺失\n" #: src/main/errors.c:474 #, c-format msgid "There were %d warnings (use warnings() to see them)\n" msgstr "共有 %d 個警告 (用 warnings() 來顯示)\n" #: src/main/errors.c:477 msgid "There were 50 or more warnings (use warnings() to see the first 50)\n" msgstr "警告多於50個 (用 warnings() 來顯示最先的50個)\n" #: src/main/errors.c:526 msgid "Error during wrapup: " msgstr "收捲時發生錯誤: " #: src/main/errors.c:551 msgid "Error in " msgstr "錯誤在" #: src/main/errors.c:577 src/main/errors.c:582 #, c-format msgid "Error: " msgstr "錯誤: " #: src/main/errors.c:601 src/main/errors.c:1224 msgid "In addition: " msgstr "此外: " #: src/main/errors.c:722 msgid "invalid option \"error\"\n" msgstr "選項 \"error\" 不正確\n" #: src/main/errors.c:802 msgid "Execution halted\n" msgstr "停止執行\n" #: src/main/errors.c:939 msgid "'msg1' must be a character string" msgstr "'msg1' 必須是字串" #: src/main/errors.c:941 msgid "'msg2' must be a character string" msgstr "'msg2' 必須是字串" #: src/main/errors.c:1036 msgid " [invalid string in stop(.)]" msgstr " [stop(.) 中的字串不正確]" #: src/main/errors.c:1062 msgid " [invalid string in warning(.)]" msgstr " [warning(.) 中的字串不正確]" #: src/main/errors.c:1077 #, c-format msgid "incorrect number of arguments to \"%s\"" msgstr "\"%s\" 中的引數數目不正確" #: src/main/errors.c:1083 src/main/errors.c:1098 #, c-format msgid "unimplemented feature in %s" msgstr "%s 中的功能尚未實作" #: src/main/errors.c:1092 msgid "invalid number of arguments" msgstr "引數數目不正確" #: src/main/errors.c:1095 msgid "time-series/vector length mismatch" msgstr "時間序列/向量長度不等" #: src/main/errors.c:1096 msgid "incompatible arguments" msgstr "不相容的引數" #: src/main/errors.c:1099 msgid "unknown error (report this!)" msgstr "不明錯誤 (請報告!)" #: src/main/errors.c:1111 msgid "unknown warning (report this!)" msgstr "不明警告 (請報告!)" #: src/main/errors.c:1189 msgid "No function to return from, jumping to top level" msgstr "沒有可回返的函數, 跳到最高層" #: src/main/errors.c:1205 msgid "top level inconsistency?" msgstr "最高層不一致？" #: src/main/errors.c:1368 msgid "bad handler data" msgstr "不當的控柄資料" #: src/main/errors.c:1518 msgid "error message not a string" msgstr "錯誤訊息不是字串" #: src/main/errors.c:1593 msgid "handler or restart stack mismatch in old restart" msgstr "舊重新啟動中的控柄或重新啟動堆疊不符合" #: src/main/errors.c:1619 src/main/errors.c:1635 msgid "bad error message" msgstr "不當的錯誤訊息" #: src/main/errors.c:1677 msgid "bad restart" msgstr "不當的重新啟動" #: src/main/errors.c:1709 msgid "restart not on stack" msgstr "未在堆疊上重新啟動" #: src/main/errors.c:1726 msgid "not in a try context" msgstr "不在 try 的上下文中" #: src/main/errors.c:1739 #, fuzzy msgid "error message must be a character string" msgstr "'msg1' 必須是字串" #: src/main/eval.c:234 #, c-format msgid "Rprof: cannot open profile file '%s'" msgstr "Rprof: 打不開程式概要分析檔案 '%s'" #: src/main/eval.c:275 msgid "can't use R profiling while byte code profiling" msgstr "在位元組碼程式概要分析時不能用 R 來同時進行程式概要分析" #: src/main/eval.c:295 msgid "R profiling is not available on this system" msgstr "本系統沒有 R 程式概要分析這個功能" #: src/main/eval.c:319 msgid "" "promise already under evaluation: recursive default argument reference or " "earlier problems?" msgstr "" #: src/main/eval.c:321 #, fuzzy msgid "restarting interrupted promise evaluation" msgstr "'eval' 不支援重新啟動" #: src/main/eval.c:367 msgid "" "evaluation nested too deeply: infinite recursion / options(expressions=)?" msgstr "評估巢狀太深：無窮遞迴/選項(表示式=)?" #: src/main/eval.c:429 src/main/eval.c:3115 msgid "argument is missing, with no default" msgstr "缺少引數, 也沒有預設值" #: src/main/eval.c:530 src/main/eval.c:3770 msgid "attempt to apply non-function" msgstr "不適用於非函數" #: src/main/eval.c:553 #, c-format msgid "%s at %s#%d: " msgstr "" #: src/main/eval.c:975 #, c-format msgid "could not find symbol \"%s\" in environment of the generic function" msgstr "一般函數環境中沒有 \"%s\" 符號" #: src/main/eval.c:993 #, c-format msgid "symbol \"%s\" not in environment of method" msgstr "方法環境中沒有 \"%s\" 符號" #: src/main/eval.c:1103 msgid "the condition has length > 1 and only the first element will be used" msgstr "條件的長度 > 1，因此只能用其第一元素" #: src/main/eval.c:1120 msgid "missing value where TRUE/FALSE needed" msgstr "需要 TRUE/FALSE 值的地方有缺值" #: src/main/eval.c:1121 msgid "argument is not interpretable as logical" msgstr "引數無法解譯為邏輯值" #: src/main/eval.c:1122 msgid "argument is of length zero" msgstr "引數長度為零" #: src/main/eval.c:1196 msgid "non-symbol loop variable" msgstr "非符號循環變數" #: src/main/eval.c:1289 src/main/eval.c:3576 msgid "invalid for() loop sequence" msgstr "不當的 for() 循環序列" #: src/main/eval.c:1440 #, fuzzy msgid "multi-argument returns are not permitted" msgstr "已不再使用多引數回傳值此一功能" #: src/main/eval.c:1489 msgid "invalid (NULL) left side of assignment" msgstr "賦值公式左側是無效 (NULL) 值" #: src/main/eval.c:1511 msgid "target of assignment expands to non-language object" msgstr "賦值目標擴充到非語言的物件" #: src/main/eval.c:1547 #, c-format msgid "overlong name in '%s'" msgstr "'%s' 中的名稱太長" #: src/main/eval.c:1607 msgid "cannot do complex assignments in base namespace" msgstr "無法在基本名稱空間中賦予複數值" #: src/main/eval.c:1609 msgid "cannot do complex assignments in base environment" msgstr "無法在基本環境中賦予複數值" #: src/main/eval.c:1646 src/main/eval.c:1673 msgid "invalid function in complex assignment" msgstr "複數賦值中的函數不正確" #: src/main/eval.c:1751 msgid "invalid (do_set) left-hand side to assignment" msgstr "(do_set) 賦值公式左側不正確" #: src/main/eval.c:1766 msgid "invalid assignment left-hand side" msgstr "賦值公式左側不正確" #: src/main/eval.c:1831 #, fuzzy, c-format msgid "argument %d is empty" msgstr "引數 %d 不是向量" #: src/main/eval.c:1834 #, c-format msgid "'%s' is missing" msgstr "" #: src/main/eval.c:1984 msgid "invalid formal argument list for \"function\"" msgstr "\"function\" 正式引數串列不正確" #: src/main/eval.c:2065 msgid "numeric 'envir' arg not of length one" msgstr "數值 'envir' 引數的長度不是 1" #: src/main/eval.c:2087 src/main/eval.c:2106 msgid "restarts not supported in 'eval'" msgstr "'eval' 不支援重新啟動" #: src/main/eval.c:2175 src/main/eval.c:2188 msgid "'Recall' called from outside a closure" msgstr "'Recall' 從閉包外部呼叫" #: src/main/eval.c:2281 msgid "value in '...' is not a promise" msgstr "'...' 中的值不是一個約定" #: src/main/eval.c:2470 src/main/objects.c:711 #, c-format msgid "call name too long in '%s'" msgstr "'%s' 中呼叫的名稱太長" #: src/main/eval.c:2491 #, c-format msgid "generic name too long in '%s'" msgstr "'%s' 中的一般名稱太長" #: src/main/eval.c:2554 #, c-format msgid "Incompatible methods (\"%s\", \"%s\") for \"%s\"" msgstr "不相容的方法 (\"%s\", \"%s\") 用於 \"%s\"" #: src/main/eval.c:2618 #, fuzzy msgid "dispatch error in group dispatch" msgstr "分派錯誤" #: src/main/eval.c:2870 #, fuzzy, c-format msgid "\"%s\" is not a %s function" msgstr "'%s' 不是函數" #: src/main/eval.c:3035 msgid "node stack overflow" msgstr "節點堆疊向上溢位" #: src/main/eval.c:3041 msgid "integer stack overflow" msgstr "整數堆疊向上溢位" #: src/main/eval.c:3095 msgid "Bad opcode" msgstr "不當的操作代碼" #: src/main/eval.c:3333 msgid "not a vector object" msgstr "非向量目的物件" #: src/main/eval.c:3341 src/main/eval.c:3363 src/main/eval.c:3387 #: src/main/eval.c:3411 msgid "can only handle simple real vectors" msgstr "只能處理簡單的實數向量" #: src/main/eval.c:3350 src/main/eval.c:3397 msgid "not a simple vector" msgstr "非簡單向量" #: src/main/eval.c:3367 src/main/eval.c:3415 src/main/subassign.c:982 #: src/main/subset.c:821 msgid "incorrect number of subscripts" msgstr "下標數目不正確" #: src/main/eval.c:3378 src/main/eval.c:3429 msgid "not a simple matrix" msgstr "非簡單矩陣" #: src/main/eval.c:3440 #, fuzzy, c-format msgid "invalid %s type in 'x %s y'" msgstr "'x %s y' 中的 'x' 類型不正確" #: src/main/eval.c:3506 msgid "bytecode version mismatch; using eval" msgstr "位元組碼版本不符；使用 eval" #: src/main/eval.c:3511 msgid "bytecode version is too old" msgstr "位元組碼版本太舊" #: src/main/eval.c:3512 msgid "bytecode version is too new" msgstr "位元組碼版本太新" #: src/main/eval.c:3517 msgid "byte code version mismatch" msgstr "位元組碼版本不符" #: src/main/eval.c:3627 msgid "invalid sequence argument in for loop" msgstr "迴圈中的序列引數不正確" #: src/main/eval.c:3753 src/main/eval.c:3874 msgid "not a BUILTIN function" msgstr "非 BUILTIN 函數" #: src/main/eval.c:3859 src/main/eval.c:4203 src/main/eval.c:4244 msgid "bad function" msgstr "不當的函數" #: src/main/eval.c:4273 msgid "numeric EXPR required for switch() without named alternatives" msgstr "" #: src/main/eval.c:4276 msgid "bad character switch offsets" msgstr "" #: src/main/eval.c:4278 #, fuzzy msgid "bad switch names" msgstr "不當的檔案名稱" #: src/main/eval.c:4292 msgid "bad numeric switch offsets" msgstr "" #: src/main/eval.c:4363 msgid "cannot find index for threaded code address" msgstr "找不到執行緒程式碼位址的索引" #: src/main/eval.c:4443 msgid "invalid symbol" msgstr "符號不正確" #: src/main/eval.c:4487 msgid "argument is not a byte code object" msgstr "引數不是位元組碼目的物件" #: src/main/eval.c:4508 msgid "bad file name" msgstr "不當的檔案名稱" #: src/main/eval.c:4512 src/main/eval.c:4533 msgid "unable to open 'file'" msgstr "無法開啟 'file'" #: src/main/eval.c:4527 src/main/saveload.c:1930 msgid "'file' must be non-empty string" msgstr "'file' 必須是非空字串" #: src/main/eval.c:4529 src/main/saveload.c:1932 src/main/saveload.c:2232 #: src/main/serialize.c:1813 msgid "'ascii' must be logical" msgstr "'ascii' 必須是邏輯值" #: src/main/eval.c:4558 src/main/eval.c:4565 msgid "R_CompiledFileName: buffer too small" msgstr "R_CompiledFileName: 緩衝區太小" #: src/main/eval.c:4598 src/main/eval.c:4647 #, fuzzy msgid "constant buffer must be a generic vector" msgstr "程式碼必須是一般向量" #: src/main/eval.c:4617 #, fuzzy msgid "constBuf must be a generic vector" msgstr "程式碼必須是一般向量" #: src/main/eval.c:4621 #, fuzzy msgid "bad constCount value" msgstr "無等高值" #: src/main/eval.c:4649 msgid "bad constant count" msgstr "" #: src/main/eval.c:4685 msgid "profile timer in use" msgstr "程式概要分析計時器在使用中" #: src/main/eval.c:4687 msgid "already byte code profiling" msgstr "已經在進行位元組碼程式概要分析" #: src/main/eval.c:4705 msgid "setting profile timer failed" msgstr "程式概要分析計時器設置失敗" #: src/main/eval.c:4722 msgid "not byte code profiling" msgstr "非位元組碼程式概要分析" #: src/main/fourier.c:54 src/main/fourier.c:145 src/main/summary.c:756 msgid "non-numeric argument" msgstr "非數值引數" #: src/main/fourier.c:72 src/main/fourier.c:87 src/main/fourier.c:159 msgid "fft factorization error" msgstr "fft 因數分解錯誤" #: src/main/fourier.c:131 msgid "vector-valued (multivariate) series required" msgstr "需要向量值序列 (多變數)" #: src/main/fourier.c:203 msgid "no factors" msgstr "非因子" #: src/main/fourier.c:206 msgid "invalid factors" msgstr "因子不正確" #: src/main/gevents.c:41 #, fuzzy, c-format msgid "'%s' events not supported in this device" msgstr "本平台不支援 nsl()" #: src/main/gevents.c:65 #, fuzzy msgid "internal error" msgstr "內部錯誤 'do_sys'" #: src/main/gevents.c:71 #, fuzzy msgid "this graphics device does not support event handling" msgstr "繪圖裝置不支援這些繪圖事件" #: src/main/gevents.c:111 msgid "invalid prompt" msgstr "提示不正確" #: src/main/gevents.c:123 #, fuzzy msgid "recursive use of getGraphicsEvent not supported" msgstr "call_R 不支援 '%s' 型式" #: src/main/gevents.c:133 #, fuzzy msgid "no graphics event handlers set" msgstr "沒有活動中的繪圖裝置" #: src/main/gram.y:144 src/main/gram.y:159 src/main/gram.y:2026 #: src/main/gram.y:2040 #, fuzzy, c-format msgid "EOF whilst reading MBCS char at line %d" msgstr "讀取 MBCS 位元組時遇到 EOF" #: src/main/gram.y:148 src/main/gram.y:156 src/main/gram.y:2030 #: src/main/gram.y:2037 #, fuzzy, c-format msgid "invalid multibyte character in parser at line %d" msgstr "在 mbcs_get_next 中不能有多位元組字元" #: src/main/gram.y:437 #, fuzzy, c-format msgid "function is too long to keep source (at line %d)" msgstr "函數太長，無法保留其程式碼" #: src/main/gram.y:1006 #, fuzzy, c-format msgid "incorrect tag type at line %d" msgstr "標記類型不正確" #: src/main/gram.y:1500 #, fuzzy msgid "contextstack overflow" msgstr "節點堆疊向上溢位" #: src/main/gram.y:1736 msgid "input" msgstr "" #: src/main/gram.y:1737 msgid "end of input" msgstr "" #: src/main/gram.y:1738 msgid "string constant" msgstr "" #: src/main/gram.y:1739 #, fuzzy msgid "numeric constant" msgstr "非數值引數" #: src/main/gram.y:1740 #, fuzzy msgid "symbol" msgstr "不是符號" #: src/main/gram.y:1741 msgid "assignment" msgstr "" #: src/main/gram.y:1742 msgid "end of line" msgstr "" #: src/main/gram.y:1756 src/main/gram.y:1762 #, fuzzy, c-format msgid "unexpected %s" msgstr "需要公式" #: src/main/gram.y:1772 #, fuzzy, c-format msgid "Repeated formal argument '%s' on line %d" msgstr "重複的正式引數" #: src/main/gram.y:1790 #, fuzzy, c-format msgid "input buffer overflow at line %d" msgstr "輸入緩衝區向上溢位" #: src/main/gram.y:1941 #, c-format msgid "integer literal %sL contains decimal; using numeric value" msgstr "" #: src/main/gram.y:1943 #, c-format msgid "non-integer value %s qualified with L; using numeric value" msgstr "" #: src/main/gram.y:1954 #, c-format msgid "integer literal %sL contains unnecessary decimal point" msgstr "" #: src/main/gram.y:1986 #, fuzzy, c-format msgid "unable to allocate buffer for long string at line %d" msgstr "無法指派記憶體 (於 GEregister)" #: src/main/gram.y:2141 #, c-format msgid "'\\x' used without hex digits in character string starting \"%s\"" msgstr "" #: src/main/gram.y:2155 #, fuzzy, c-format msgid "\\uxxxx sequences not supported inside backticks (line %d)" msgstr "\\Uxxxxxxxx 序列於 Windows 上並不支援" #: src/main/gram.y:2170 #, c-format msgid "'\\u' used without hex digits in character string starting \"%s\"" msgstr "" #: src/main/gram.y:2178 #, fuzzy, c-format msgid "invalid \\u{xxxx} sequence (line %d)" msgstr "\\u{xxxx} 序列不正確" #: src/main/gram.y:2190 #, fuzzy, c-format msgid "\\Uxxxxxxxx sequences not supported inside backticks (line %d)" msgstr "\\Uxxxxxxxx 序列於 Windows 上並不支援" #: src/main/gram.y:2205 #, c-format msgid "'\\U' used without hex digits in character string starting \"%s\"" msgstr "" #: src/main/gram.y:2213 #, fuzzy, c-format msgid "invalid \\U{xxxxxxxx} sequence (line %d)" msgstr "\\U{xxxxxxxx} 序列不正確" #: src/main/gram.y:2253 #, fuzzy, c-format msgid "'\\%c' is an unrecognized escape in character string starting \"%s\"" msgstr "第一個引數必須是字串" #: src/main/gram.y:2301 msgid "mixing Unicode and octal/hex escapes in a string is not allowed" msgstr "" #: src/main/gram.y:2305 #, c-format msgid "" "string at line %d containing Unicode escapes not in this locale\n" "is too long (max 10000 chars)" msgstr "" #: src/main/gram.y:2404 #, fuzzy, c-format msgid "functions nested too deeply in source code at line %d" msgstr "程式碼來源中的函數功能巢狀太深" #: src/main/gram.y:2837 src/main/gram.y:2844 src/main/gram.y:2850 #: src/main/gram.y:2857 #, fuzzy, c-format msgid "contextstack overflow at line %d" msgstr "整數堆疊向上溢位" #: src/main/graphics.c:287 #, fuzzy, c-format msgid "bad units specified in '%s'" msgstr "%s 中的單位設定不正確，請回報!" #: src/main/graphics.c:1778 src/main/graphics.c:1800 msgid "attempt to plot on null device" msgstr "試圖於 null 裝置上繪圖" #: src/main/graphics.c:1830 msgid "outer margins too large (fig.region too small)" msgstr "外側版邊太大 (fig.region 太小)" #: src/main/graphics.c:1832 msgid "figure region too large" msgstr "圖區太大" #: src/main/graphics.c:1834 msgid "figure margins too large" msgstr "圖版邊太大" #: src/main/graphics.c:1836 msgid "plot region too large" msgstr "繪圖區太大" #: src/main/graphics.c:1885 #, c-format msgid "nonfinite axis limits [GScale(%g,%g,%d, .); log=%d]" msgstr "座標範圍不能無限大 [GScale(%g,%g,%d, .); log=%d]" #: src/main/graphics.c:1915 #, c-format msgid "axis style \"%c\" unimplemented" msgstr "座標形式 \"%c\" 尚未實作" #: src/main/graphics.c:1981 #, c-format msgid "relative range of values =%4.0f * EPS, is small (axis %d)" msgstr "相對範圍值 =%4.0f * EPS太小 (座標 %d)" #: src/main/graphics.c:2198 src/main/graphics.c:2561 msgid "No graphics device is active" msgstr "沒有活動中的繪圖裝置" #: src/main/graphics.c:2393 msgid "plot.new has not been called yet" msgstr "plot.new 還沒有被呼叫" #: src/main/graphics.c:2528 msgid "no locator capability in device driver" msgstr "裝置驅動程式沒有定位器功能" #: src/main/graphics.c:2800 src/main/graphics.c:2836 msgid "unable to allocate memory (in GPolygon)" msgstr "無法指派記憶體 (GPolygon)" #: src/main/graphics.c:3018 msgid "zero-length arrow is of indeterminate angle and so skipped" msgstr "零長度箭頭的角度不定，因此忽略不用" #: src/main/graphics.c:3099 #, c-format msgid "invalid par(\"bty\") = '%c'; no box() drawn" msgstr "par(\"bty\")='%c' 不正確; 取消繪製 box()" #: src/main/graphics.c:3116 msgid "invalid argument to GBox" msgstr "GBox 引數不正確" #: src/main/graphics.c:3360 #, fuzzy msgid "Metric information not available for this device" msgstr "此連結不能被截短" #: src/main/grep.c:89 #, fuzzy, c-format msgid "invalid regular expression '%s', reason '%s'" msgstr "正規表示式「%s」不正確" #: src/main/grep.c:91 #, fuzzy, c-format msgid "invalid regular expression, reason '%s'" msgstr "正規表示式「%s」不正確" #: src/main/grep.c:148 src/main/grep.c:751 src/main/grep.c:753 #: src/main/grep.c:1023 src/main/grep.c:1031 src/main/grep.c:1478 #: src/main/grep.c:1480 src/main/grep.c:2163 src/main/grep.c:2165 #, fuzzy, c-format msgid "argument '%s' will be ignored" msgstr "非正數的 'fill' 引數將會被忽略" #: src/main/grep.c:214 src/main/grep.c:301 src/main/grep.c:409 #: src/main/grep.c:871 src/main/grep.c:2265 #, fuzzy, c-format msgid "input string %d is invalid UTF-8" msgstr "輸入的字串 %d 不適用於此語言環境" #: src/main/grep.c:279 src/main/grep.c:376 #, fuzzy, c-format msgid "'split' string %d is invalid UTF-8" msgstr "輸入的字串 %d 不適用於此語言環境" #: src/main/grep.c:283 src/main/grep.c:380 src/main/grep.c:553 #, fuzzy, c-format msgid "'split' string %d is invalid in this locale" msgstr "輸入的字串 %d 不適用於此語言環境" #: src/main/grep.c:388 src/main/grep.c:840 src/main/grep.c:1560 #: src/main/grep.c:2228 #, c-format msgid "" "PCRE pattern compilation error\n" "\t'%s'\n" "\tat '%s'\n" msgstr "" #: src/main/grep.c:390 #, c-format msgid "invalid split pattern '%s'" msgstr "split 的式樣 '%s' 不正確" #: src/main/grep.c:394 src/main/grep.c:846 src/main/grep.c:1567 #: src/main/grep.c:2235 #, c-format msgid "" "PCRE pattern study error\n" "\t'%s'\n" msgstr "" #: src/main/grep.c:823 src/main/grep.c:2211 #, fuzzy msgid "regular expression is invalid UTF-8" msgstr "正規表示式不適用於此語言環境" #: src/main/grep.c:842 src/main/grep.c:1562 src/main/grep.c:2230 #, c-format msgid "invalid regular expression '%s'" msgstr "正規表示式「%s」不正確" #: src/main/grep.c:1240 msgid "pattern matches an empty string infinitely, returning first match only" msgstr "" #: src/main/grep.c:1535 #, fuzzy msgid "'pattern' is invalid UTF-8" msgstr "'pattern' 的值在本語言環境下不正確" #: src/main/grep.c:1537 #, fuzzy msgid "'replacement' is invalid UTF-8" msgstr "'replacement' 的值在本語言環境下不正確" #: src/main/grep.c:1541 msgid "'pattern' is invalid in this locale" msgstr "'pattern' 的值在本語言環境下不正確" #: src/main/grep.c:1544 msgid "'replacement' is invalid in this locale" msgstr "'replacement' 的值在本語言環境下不正確" #: src/main/grep.c:1549 msgid "zero-length pattern" msgstr "式樣長度為零" #: src/main/grep.c:1691 src/main/grep.c:1707 src/main/grep.c:1755 #: src/main/grep.c:1771 src/main/grep.c:1818 src/main/grep.c:1834 #, fuzzy msgid "result string is too long" msgstr "輸入字串太長" #: src/main/internet.c:90 msgid "internet routines cannot be accessed in module" msgstr "無法讀寫模組中的網際網路例行程式" #: src/main/internet.c:102 src/main/internet.c:140 src/main/internet.c:152 #: src/main/internet.c:163 src/main/internet.c:174 src/main/internet.c:185 #: src/main/internet.c:194 src/main/internet.c:205 src/main/internet.c:216 #: src/main/internet.c:226 src/main/internet.c:237 msgid "internet routines cannot be loaded" msgstr "無法載入網際網路例行程式" #: src/main/internet.c:117 src/main/memory.c:3067 src/main/memory.c:3076 #: src/main/memory.c:3087 src/main/memory.c:3100 src/main/memory.c:3116 #: src/main/memory.c:3133 msgid "bad value" msgstr "不當的值" #: src/main/internet.c:123 #, fuzzy msgid "internet routines were already initialized" msgstr "無法載入網際網路例行程式" #: src/main/internet.c:248 #, fuzzy msgid "invalid bind address specification" msgstr "檔案名稱設定不正確" #: src/main/internet.c:268 src/main/internet.c:278 src/main/internet.c:288 #: src/main/internet.c:298 src/main/internet.c:308 src/main/internet.c:318 #: src/main/internet.c:329 msgid "socket routines cannot be loaded" msgstr "無法載入插槽例行程式" #: src/main/lapack.c:62 msgid "lapack routines cannot be accessed in module" msgstr "無法讀寫模組中的 lapack 例行程式" #: src/main/lapack.c:79 src/main/lapack.c:91 src/main/lapack.c:103 #: src/main/lapack.c:115 src/main/lapack.c:127 src/main/lapack.c:139 #: src/main/lapack.c:151 src/main/lapack.c:163 src/main/lapack.c:175 #: src/main/lapack.c:186 src/main/lapack.c:197 src/main/lapack.c:208 #: src/main/lapack.c:220 src/main/lapack.c:232 src/main/lapack.c:244 #: src/main/lapack.c:256 src/main/lapack.c:268 src/main/lapack.c:280 #: src/main/lapack.c:292 src/main/lapack.c:304 src/main/lapack.c:316 #: src/main/lapack.c:328 msgid "lapack routines cannot be loaded" msgstr "無法載入 lapack 例行程式" #: src/main/logic.c:47 msgid "binary operations require two arguments" msgstr "二元運算需要兩個引數" #: src/main/logic.c:65 src/main/logic.c:127 #, fuzzy msgid "operations are possible only for numeric, logical or complex types" msgstr "此運算只適用於數值或邏輯類型" #: src/main/logic.c:75 msgid "binary operation on non-conformable arrays" msgstr "二元運算不能在非調和陣列上進行" #: src/main/logic.c:101 src/main/relop.c:146 msgid "non-conformable time series" msgstr "非調和時間序列" #: src/main/logic.c:216 #, c-format msgid "'%s' operator requires 2 arguments" msgstr "'%s' 運算子需要兩個引數" #: src/main/logic.c:224 #, c-format msgid "invalid 'x' type in 'x %s y'" msgstr "'x %s y' 中的 'x' 類型不正確" #: src/main/logic.c:231 #, c-format msgid "invalid 'y' type in 'x %s y'" msgstr "'x %s y' 中的 'y' 類型不正確" #: src/main/logic.c:303 msgid "Unary operator `!' called with two arguments" msgstr "呼叫一元運算「!」時用了兩個引數" #: src/main/logic.c:407 #, c-format msgid "coercing argument of type '%s' to logical" msgstr "" #: src/main/main.c:48 msgid "dummy - do not translate" msgstr "dummy - do not translate" #: src/main/main.c:472 msgid "Error: segfault from C stack overflow\n" msgstr "錯誤: C 堆疊向上溢位的區段錯誤\n" #: src/main/main.c:859 msgid "unable to open the base package\n" msgstr "無法開啟基本套件\n" #: src/main/main.c:935 msgid "unable to restore saved data in .RData\n" msgstr "不可使用 .Rdata 來復原儲存資料\n" #: src/main/main.c:980 msgid "During startup - " msgstr "於啟動期間 - " #: src/main/main.c:1211 msgid "cannot quit from browser" msgstr "無法離開瀏覽器" #: src/main/main.c:1215 msgid "one of \"yes\", \"no\", \"ask\" or \"default\" expected." msgstr "只能用 \"yes\"、\"no\"、\"ask\" 或 \"default\" 中的一個。" #: src/main/main.c:1220 msgid "save=\"ask\" in non-interactive use: command-line default will be used" msgstr "save=\"ask\" 不能在非交互狀態時使用：改用命令列預設值" #: src/main/main.c:1228 msgid "unrecognized value of 'save'" msgstr "沒有這種 'save' 值" #: src/main/main.c:1231 msgid "invalid 'status', 0 assumed" msgstr "'status' 不正確, 假定為 0" #: src/main/main.c:1236 msgid "invalid 'runLast', FALSE assumed" msgstr "'runLast' 不正確, 假定為 FALSE" #: src/main/main.c:1267 msgid "cannot allocate space for toplevel callback element" msgstr "無法為最高層回呼元素指派空間" #: src/main/main.c:1345 msgid "negative index passed to R_removeTaskCallbackByIndex" msgstr "負的索引值被傳遞給 R_removeTaskCallbackByIndex" #: src/main/main.c:1453 #, c-format msgid "warning messages from top-level task callback '%s'\n" msgstr "最高層任務回呼 '%s' 產生了警告訊息\n" #: src/main/main.c:1509 msgid "top-level task callback did not return a logical value" msgstr "最高層任務回呼沒回傳邏輯值" #: src/main/mapply.c:61 msgid "argument 'MoreArgs' of 'mapply' is not a list" msgstr "'mapply' 的引數 'MoreArgs' 不是一個串列" #: src/main/mapply.c:98 msgid "longer argument not a multiple of length of shorter" msgstr "長引數長度不是短引數長度的整數倍" #: src/main/match.c:108 msgid "invalid partial string match" msgstr "部分字串比對不正確" #: src/main/match.c:222 src/main/match.c:262 src/main/objects.c:54 #: src/main/objects.c:64 #, c-format msgid "formal argument \"%s\" matched by multiple actual arguments" msgstr "正式引數 \"%s\" 有多個與之相對應的實際引數" #: src/main/match.c:225 src/main/match.c:260 #, c-format msgid "argument %d matches multiple formal arguments" msgstr "引數 %d 有多個與之相對應的正式引數" #: src/main/match.c:266 #, c-format msgid "partial argument match of '%s' to '%s'" msgstr "" #: src/main/match.c:377 #, fuzzy, c-format msgid "unused argument(s) %s" msgstr "未使用的引數 (%s ...)" #: src/main/memory.c:1128 msgid "can only weakly reference/finalize reference objects" msgstr "參考物件只能被弱型參考或被終了" #: src/main/memory.c:1162 msgid "finalizer must be a function or NULL" msgstr "終了程式必須是函數或 NULL" #: src/main/memory.c:1213 src/main/memory.c:1221 src/main/memory.c:1232 msgid "not a weak reference" msgstr "非弱型參考" #: src/main/memory.c:1348 msgid "first argument must be environment or external pointer" msgstr "第一引數必須是環境或外部指標" #: src/main/memory.c:1350 msgid "second argument must be a function" msgstr "第二引數必須是函數" #: src/main/memory.c:1354 msgid "third argument must be 'TRUE' or 'FALSE'" msgstr "第三引數的值必須是 'TRUE' 或 'FALSE'" #: src/main/memory.c:1842 msgid "vector memory exhausted (limit reached?)" msgstr "向量記憶體已用完 (達到了極值?)" #: src/main/memory.c:1848 msgid "cons memory exhausted (limit reached?)" msgstr "cons 記憶體已用完 (達到了極值?)" #: src/main/memory.c:1853 #, fuzzy msgid "memory exhausted (limit reached?)" msgstr "cons 記憶體已用完 (達到了極值?)" #: src/main/memory.c:1979 src/main/memory.c:1985 #, fuzzy, c-format msgid "cannot allocate memory block of size %0.1f Gb" msgstr "無法分派大小為 %.0f 的記憶體區塊" #: src/main/memory.c:2213 msgid "negative length vectors are not allowed" msgstr "不允許負長度的向量" #: src/main/memory.c:2239 src/main/memory.c:2252 src/main/memory.c:2265 #: src/main/memory.c:2280 #, c-format msgid "cannot allocate vector of length %d" msgstr "無法分派長度為 %d 的向量" #: src/main/memory.c:2295 #, fuzzy, c-format msgid "invalid type/length (%s/%d) in vector allocation" msgstr "向量指派的類型/長度 (%d/%d) 不正確" #: src/main/memory.c:2364 #, fuzzy, c-format msgid "cannot allocate vector of size %0.1f Gb" msgstr "無法指派大小為 %lu Kb 的向量" #: src/main/memory.c:2368 #, fuzzy, c-format msgid "cannot allocate vector of size %0.1f Mb" msgstr "無法指派大小為 %lu Kb 的向量" #: src/main/memory.c:2372 #, fuzzy, c-format msgid "cannot allocate vector of size %0.f Kb" msgstr "無法指派大小為 %lu Kb 的向量" #: src/main/memory.c:2499 msgid "gc.time() is not implemented on this system" msgstr "本系統沒有實作 gc.time()" #: src/main/memory.c:2705 msgid "protect(): protection stack overflow" msgstr "protect()：防護堆疊向上溢位" #: src/main/memory.c:2721 #, c-format msgid "unprotect(): only %d protected items" msgstr "" #: src/main/memory.c:2735 msgid "unprotect_ptr: pointer not found" msgstr "unprotect_ptr: 找不到這個指標" #: src/main/memory.c:2791 #, fuzzy, c-format msgid "Calloc could not allocate memory (%.0f of %u bytes)" msgstr "Calloc 無法分派 (%d / %d) 記憶體" #: src/main/memory.c:2802 #, fuzzy, c-format msgid "Realloc could not re-allocate memory (%.0f bytes)" msgstr "Realloc 無法重新分派 (大小為 %d) 的記憶體" #: src/main/memory.c:3021 msgid "not safe to return vector pointer" msgstr "回傳向量指標不是安全的做法" #: src/main/memory.c:3259 #, fuzzy msgid "memory profiling is not available on this system" msgstr "本系統沒有 R 程式概要分析這個功能" #: src/main/memory.c:3324 #, fuzzy, c-format msgid "Rprofmem: cannot open output file '%s'" msgstr "Rprof: 打不開程式概要分析檔案 '%s'" #: src/main/model.c:140 msgid "invalid term in model formula" msgstr "模型公式項目不正確" #: src/main/model.c:215 msgid "invalid model formula" msgstr "模型公式不正確" #: src/main/model.c:241 src/main/model.c:485 msgid "invalid power in formula" msgstr "公式中的冪不正確" #: src/main/model.c:277 msgid "invalid model formula in ExtractVars" msgstr "ExtractVars 中的模型公式不正確" #: src/main/model.c:607 #, c-format msgid "duplicated name '%s' in data frame using '.'" msgstr "在資料框中用 '.' 時不能有重複的名稱 '%s'" #: src/main/model.c:664 msgid "invalid model formula in EncodeVars" msgstr "EncodeVars 中的模型公式不正確" #: src/main/model.c:754 msgid "argument is not a valid model" msgstr "引數不是正確的模型" #: src/main/model.c:775 msgid "'data' argument is of the wrong type" msgstr "'data' 引數類型不正確" #: src/main/model.c:1040 msgid "'.' in formula and no 'data' argument" msgstr "'.' 存在於公式中且缺少 'data' 引數" #: src/main/model.c:1188 msgid "invalid formula in 'update'" msgstr "'update' 中的公式不正確" #: src/main/model.c:1226 msgid "formula expected" msgstr "需要公式" #: src/main/model.c:1317 msgid "invalid variables" msgstr "變數不正確" #: src/main/model.c:1321 src/main/model.c:1326 msgid "number of variables != number of variable names" msgstr "變數數目 != 變數名稱數目" #: src/main/model.c:1324 msgid "invalid extra variables" msgstr "額外變數不正確" #: src/main/model.c:1328 msgid "invalid extra variable names" msgstr "額外變數名稱不正確" #: src/main/model.c:1349 #, c-format msgid "overlong names in '%s'" msgstr "'%s' 中的名稱太長" #: src/main/model.c:1376 #, fuzzy, c-format msgid "invalid type (%s) for variable '%s'" msgstr "座標標記類型不正確" #: src/main/model.c:1381 #, c-format msgid "variable lengths differ (found for '%s')" msgstr "變數長度不一樣 (發現於 '%s')" #: src/main/model.c:1435 msgid "invalid result from na.action" msgstr "na.action 的結果不正確" #: src/main/model.c:1629 msgid "invalid model frame" msgstr "模型框格不正確" #: src/main/model.c:1631 msgid "do not know how many cases" msgstr "案例數目不清" #: src/main/model.c:1654 #, c-format msgid "variable lengths differ (found for variable %d)" msgstr "變數長度不一樣 (發現於變數 %d)" #: src/main/model.c:1658 src/main/model.c:1665 #, c-format msgid "variable %d has no levels" msgstr "變數 %d 沒有因子層" #: src/main/model.c:1777 msgid "the response appeared on the right-hand side and was dropped" msgstr "公式右側有反應出現，忽略不用" #: src/main/model.c:1797 #, c-format msgid "term %d would require %.0g columns" msgstr "" #: src/main/model.c:1801 #, c-format msgid "matrix would require %.0g columns" msgstr "" #: src/main/model.c:1812 #, c-format msgid "problem with term %d in model.matrix: no columns are assigned" msgstr "模型矩陣的 %d 項有問題: 沒有指定的行" #: src/main/model.c:1861 src/main/model.c:1866 src/main/model.c:1872 #: src/main/model.c:1883 src/main/model.c:1889 src/main/model.c:1895 msgid "term names will be truncated" msgstr "項目名稱太長，已被截短" #: src/main/model.c:1875 msgid "complex variables are not currently allowed in model matrices" msgstr "" #: src/main/model.c:1899 #, fuzzy, c-format msgid "variables of type '%s' are not allowed in model matrices" msgstr "矩陣下標中不允許負值" #: src/main/names.c:1046 msgid "string argument required" msgstr "需要字串引數" #: src/main/names.c:1049 msgid "no such primitive function" msgstr "沒有此一原始函數" #: src/main/names.c:1185 msgid "attempt to use zero-length variable name" msgstr "不能用零長度的變數名" #: src/main/names.c:1187 #, c-format msgid "variable names are limited to %d bytes" msgstr "" #: src/main/names.c:1214 msgid "invalid .Internal() argument" msgstr ".Internal() 引數不正確" #: src/main/names.c:1217 msgid "invalid internal function" msgstr "內部函數不正確" #: src/main/names.c:1219 #, c-format msgid "no internal function \"%s\"" msgstr "沒有 \"%s\" 這個內部函數" #: src/main/objects.c:44 msgid "generic 'function' is not a function" msgstr "一般 'function' 不是函數" #: src/main/objects.c:194 msgid "bad generic call environment" msgstr "一般呼叫環境不正確" #: src/main/objects.c:200 msgid "bad generic definition environment" msgstr "一般定義環境不正確" #: src/main/objects.c:239 msgid "" "No .S3MethodsClass table, can't use S4 objects with S3 methods (methods " "package not attached?)" msgstr "" #: src/main/objects.c:263 src/main/objects.c:402 msgid "'UseMethod' used in an inappropriate fashion" msgstr "'UseMethod' 不能這樣使用" #: src/main/objects.c:283 msgid "Invalid generic function in 'usemethod'" msgstr "'usemethod' 中不能用一般功能" #: src/main/objects.c:390 #, fuzzy msgid "there must be a 'generic' argument" msgstr "必須有第一引數" #: src/main/objects.c:394 #, fuzzy msgid "'generic' argument must be a character string" msgstr "第二個引數必須是字串" #: src/main/objects.c:431 msgid "'UseMethod' called from outside a closure" msgstr "'UseMethod' 從閉包外部被呼叫" #: src/main/objects.c:438 msgid "first argument must be a generic name" msgstr "第一引數必須是一般名稱" #: src/main/objects.c:463 #, fuzzy, c-format msgid "no applicable method for '%s' applied to an object of class \"%s\"" msgstr "\"%s\" 沒有適用的方法" #: src/main/objects.c:524 msgid "'NextMethod' called from outside a function" msgstr "'NextMethod' 不能在函數外呼叫" #: src/main/objects.c:530 msgid "'NextMethod' called from an anonymous function" msgstr "'NextMethod' 不能在匿名函數內呼叫" #: src/main/objects.c:554 msgid "no calling generic was found: was a method called directly?" msgstr "找不到呼叫此方法的一般函數: 是不是已經直接呼叫這個方法?" #: src/main/objects.c:557 #, c-format msgid "'function' is not a function, but of type %d" msgstr "'function' 不是函數, 而是類型 %d" #: src/main/objects.c:631 msgid "wrong argument ..." msgstr "引數不正確 ..." #: src/main/objects.c:644 msgid "object not specified" msgstr "目的物件沒有指定" #: src/main/objects.c:654 src/main/objects.c:661 msgid "generic function not specified" msgstr "一般功能沒有指定" #: src/main/objects.c:658 msgid "invalid generic argument to NextMethod" msgstr "NextMethod 不能用一般引數" #: src/main/objects.c:671 msgid "invalid 'group' argument found in NextMethod" msgstr "NextMethod 不能用 'group' 引數" #: src/main/objects.c:690 msgid "wrong value for .Method" msgstr ".Method 的值不正確" #: src/main/objects.c:694 src/main/objects.c:703 #, c-format msgid "method name too long in '%s'" msgstr "'%s' 中的方法名稱太長" #: src/main/objects.c:706 msgid "Incompatible methods ignored" msgstr "不相容方法，忽略不用" #: src/main/objects.c:766 src/main/objects.c:771 msgid "no method to invoke" msgstr "沒有可以呼叫的方法" #: src/main/objects.c:817 msgid "cannot unclass an environment" msgstr "無法取消環境的類別" #: src/main/objects.c:820 msgid "cannot unclass an external pointer" msgstr "無法取消外部指標的類別" #: src/main/objects.c:855 msgid "'what' must be a character vector" msgstr "'what' 必須是字元向量" #: src/main/objects.c:859 msgid "'which' must be a length 1 logical vector" msgstr "'which' 必須是長度為 1 的邏輯向量" #: src/main/objects.c:865 msgid "use 'is()' instead of 'inherits()' on S4 objects" msgstr "" #: src/main/objects.c:1048 #, c-format msgid "unable to find a non-generic version of function \"%s\"" msgstr "無法找到函數 \"%s\" 非一般的版本" #: src/main/objects.c:1080 msgid "" "standardGeneric called without methods dispatch enabled (will be ignored)" msgstr "standardGeneric 被呼叫，但方法分派沒有啟用 (忽略不用)" #: src/main/objects.c:1089 msgid "argument to standardGeneric must be a non-empty character string" msgstr "standardGeneric 的引數必須是非空字串" #: src/main/objects.c:1094 #, c-format msgid "" "call to standardGeneric(\"%s\") apparently not from the body of that generic " "function" msgstr "不能從非同屬函數中呼叫 standardGeneric(\"%s\") " #: src/main/objects.c:1117 msgid "argument 'code' must be a character string" msgstr "引數 'code' 必須是字串" #: src/main/objects.c:1184 #, c-format msgid "" "invalid primitive methods code (\"%s\"): should be \"clear\", \"reset\", " "\"set\", or \"suppress\"" msgstr "" "原始方法程式碼 (\"%s\") 不正確：應該是 \"clear\"、\"reset\"、\"set\" 或 " "\"suppress\"" #: src/main/objects.c:1192 msgid "invalid object: must be a primitive function" msgstr "目的物件不正確: 必須是原始函數" #: src/main/objects.c:1239 #, c-format msgid "" "the formal definition of a primitive generic must be a function object (got " "type '%s')" msgstr "原始一般函數的正式定義必須是函數目的物件 (不能是 '%s' 類別)" #: src/main/objects.c:1269 #, c-format msgid "object returned as generic function \"%s\" doesn't appear to be one" msgstr "" #: src/main/objects.c:1367 msgid "invalid primitive operation given for dispatch" msgstr "不能分派原始運算" #: src/main/objects.c:1393 src/main/objects.c:1412 msgid "dispatch error" msgstr "分派錯誤" #: src/main/objects.c:1406 #, c-format msgid "" "primitive function \"%s\" has been set for methods but no generic function " "supplied" msgstr "原始函數 \"%s\" 設定了方法，但沒有一般函數 " #: src/main/objects.c:1431 msgid "C level MAKE_CLASS macro called with NULL string pointer" msgstr "C 級的 MAKE_TYPE 巨集不能用 NULL 字串指標來呼叫" #: src/main/objects.c:1447 #, fuzzy msgid "R_getClassDef(.) called with NULL string pointer" msgstr "C 級的 MAKE_TYPE 巨集不能用 NULL 字串指標來呼叫" #: src/main/objects.c:1467 msgid "C level NEW macro called with null class definition pointer" msgstr "C 級的 NEW 巨集不能用 null 類別定義指標來呼叫" #: src/main/objects.c:1471 #, fuzzy, c-format msgid "trying to generate an object from a virtual class (\"%s\")" msgstr "無法從虛擬類別 (\"%s\") 產生 C 目的物件" #: src/main/objects.c:1516 msgid "'R_get_primname' called on a non-primitive" msgstr "" #: src/main/objects.c:1546 #, c-format msgid "Object of class \"%s\" does not correspond to a valid S3 object" msgstr "" #: src/main/optim.c:73 src/main/optim.c:100 src/main/optim.c:184 msgid "non-finite value supplied by optim" msgstr "optim 回傳了無限值" #: src/main/optim.c:80 #, c-format msgid "objective function in optim evaluates to length %d not 1" msgstr "optim 內的目的函數長度被評估為 %d，而不是 1" #: src/main/optim.c:107 #, c-format msgid "gradient in optim evaluated to length %d not %d" msgstr "optim 內的梯度長度被評估為 %d，而不是 %d" #: src/main/optim.c:191 #, c-format msgid "candidate point in optim evaluated to length %d not %d" msgstr "optim 內的候選點長度被評估為 %d，而不是 %d" #: src/main/optim.c:221 src/main/optim.c:409 msgid "'fn' is not a function" msgstr "'fn' 不是函數" #: src/main/optim.c:238 src/main/optim.c:415 msgid "'parscale' is of the wrong length" msgstr "'parscale' 的長度不正確" #: src/main/optim.c:252 msgid "'maxit' is not an integer" msgstr "'maxit' 不是整數" #: src/main/optim.c:271 msgid "'tmax' is not an integer" msgstr "'tmax' 不是整數" #: src/main/optim.c:273 src/main/optim.c:290 src/main/optim.c:315 #: src/main/optim.c:345 src/main/optim.c:423 msgid "'gr' is not a function" msgstr "'gr' 不是函數" #: src/main/optim.c:296 src/main/optim.c:321 src/main/optim.c:351 #: src/main/optim.c:429 msgid "'ndeps' is of the wrong length" msgstr "'ndeps' 長度不正確" #: src/main/optim.c:381 msgid "unknown 'method'" msgstr "不明的 'method'" #: src/main/optim.c:512 msgid "REPORT must be > 0 (method = \"BFGS\")" msgstr "REPORT 必須 > 0 (method = \"BFGS\")" #: src/main/optim.c:523 msgid "initial value in 'vmmin' is not finite" msgstr "'vmmin' 的初始值不能為無限大" #: src/main/optim.c:671 msgid "function cannot be evaluated at initial parameters" msgstr "不可使用初始參數來評估函數" #: src/main/optim.c:865 msgid "unknown 'type' in CG method of optim" msgstr "optim 的 CG 方法中沒有這種 'type'" #: src/main/optim.c:878 msgid "Function cannot be evaluated at initial parameters" msgstr "不可使用初始參數來評估函數" #: src/main/optim.c:933 msgid "unknown type in CG method of optim" msgstr "optim 的 CG 方法中沒有此一類型" #: src/main/optim.c:1026 msgid "REPORT must be > 0 (method = \"L-BFGS-B\")" msgstr "REPORT必須 > 0 (method = \"L-BFGS-B\")" #: src/main/optim.c:1050 msgid "L-BFGS-B needs finite values of 'fn'" msgstr "L-BFGS-B 不能有 'fn' 的無限值" #: src/main/optim.c:1105 #, fuzzy msgid "trace, REPORT must be >= 0 (method = \"SANN\")" msgstr "REPORT 必須 > 0 (method = \"BFGS\")" #: src/main/optimize.c:53 src/main/optimize.c:136 src/main/optimize.c:390 msgid "NA replaced by maximum positive value" msgstr "NA 被換成最大的正值" #: src/main/optimize.c:61 src/main/optimize.c:148 src/main/optimize.c:398 msgid "NA/Inf replaced by maximum positive value" msgstr "NA/Inf 被換成最大的正值" #: src/main/optimize.c:70 msgid "invalid function value in 'optimize'" msgstr "'optimize' 中的函數值不正確" #: src/main/optimize.c:88 src/main/optimize.c:178 src/main/optimize.c:591 msgid "attempt to minimize non-function" msgstr "不能將非函數最小化" #: src/main/optimize.c:104 src/main/optimize.c:192 msgid "'xmin' not less than 'xmax'" msgstr "'xmin' 不能小於 xmax" #: src/main/optimize.c:145 #, fuzzy msgid "-Inf replaced by maximally negative value" msgstr "NA/Inf 被換成最大的正值" #: src/main/optimize.c:158 msgid "invalid function value in 'zeroin'" msgstr "'zeroin' 函數值不正確" #: src/main/optimize.c:205 msgid "'maxiter' must be positive" msgstr "'maxiter' 必須是正數" #: src/main/optimize.c:233 src/main/optimize.c:239 #, fuzzy, c-format msgid "NA value for '%s' is not allowed" msgstr "'...' 中的值不是一個約定" #: src/main/optimize.c:382 msgid "non-finite value supplied by 'nlm'" msgstr "'nlm' 回傳了無限值" #: src/main/optimize.c:417 msgid "invalid function value in 'nlm' optimizer" msgstr "'nlm' 最佳化器中的函數值不正確" #: src/main/optimize.c:428 src/main/optimize.c:443 msgid "function value caching for optimization is seriously confused" msgstr "最佳化時快取的函數值有嚴重混淆" #: src/main/optimize.c:458 msgid "numeric parameter expected" msgstr "需要數值參數" #: src/main/optimize.c:462 msgid "conflicting parameter lengths" msgstr "參數的長度自相矛盾" #: src/main/optimize.c:466 msgid "invalid parameter length" msgstr "參數長度不正確" #: src/main/optimize.c:476 src/main/optimize.c:483 msgid "missing value in parameter" msgstr "參數中不能有缺值" #: src/main/optimize.c:488 msgid "invalid parameter type" msgstr "參數類型不正確" #: src/main/optimize.c:496 msgid "invalid NA value in parameter" msgstr "參數中的 NA 值不正確" #: src/main/optimize.c:506 msgid "non-positive number of parameters in nlm" msgstr "nlm 參數不能是負的" #: src/main/optimize.c:508 msgid "nlm is inefficient for 1-d problems" msgstr "用 nlm 來解決一維問題效率不高" #: src/main/optimize.c:510 msgid "invalid gradient tolerance in nlm" msgstr "nlm 中的梯度容錯不正確" #: src/main/optimize.c:512 msgid "invalid iteration limit in nlm" msgstr "nlm 中的迭代極值不正確" #: src/main/optimize.c:514 msgid "minimization function has no good digits in nlm" msgstr "nlm 中的最小化函數沒有可以用的適當的數字" #: src/main/optimize.c:516 msgid "no analytic gradient to check in nlm!" msgstr "nlm 中沒有可以查的分析梯度!" #: src/main/optimize.c:518 msgid "no analytic Hessian to check in nlm!" msgstr "nlm 中沒有可以查的分析用 Hessian!" #: src/main/optimize.c:520 msgid "probable coding error in analytic gradient" msgstr "分析梯度的程式碼很有可能發生錯誤" #: src/main/optimize.c:522 msgid "probable coding error in analytic Hessian" msgstr "分析 Hessian 的程式碼很有可能發生錯誤" #: src/main/optimize.c:524 #, c-format msgid "" "*** unknown error message (msg = %d) in nlm()\n" "*** should not happen!" msgstr "nlm() 產生了不明的錯誤訊息 (msg = %d)。這不應該發生!" #: src/main/optimize.c:535 msgid "Relative gradient close to zero.\n" msgstr "相對梯度距離零太近。\n" #: src/main/optimize.c:536 src/main/optimize.c:540 msgid "Current iterate is probably solution.\n" msgstr "目前的迭代值很可能就已經是答案了。\n" #: src/main/optimize.c:539 msgid "Successive iterates within tolerance.\n" msgstr "在容錯範圍內連續迭代。\n" #: src/main/optimize.c:543 msgid "Last global step failed to locate a point lower than x.\n" msgstr "最後一步的整體最佳化沒有能找到比 x 值要小的一個點。\n" #: src/main/optimize.c:544 msgid "" "Either x is an approximate local minimum of the function,\n" "the function is too non-linear for this algorithm,\n" "or steptol is too large.\n" msgstr "" "要麼 x 已經是函數的本地最小值，要麼這個函數太非線性，要麼 steptol 太大。\n" #: src/main/optimize.c:549 msgid "Iteration limit exceeded. Algorithm failed.\n" msgstr "超過了迭代極值。演算法失敗。\n" #: src/main/optimize.c:552 msgid "" "Maximum step size exceeded 5 consecutive times.\n" "Either the function is unbounded below,\n" "becomes asymptotic to a finite value\n" "from above in some direction,\n" "or stepmx is too small.\n" msgstr "" "最大步驟超過了 5 次。\n" "這個函數要麼沒有下邊界，\n" "從上邊界達到了漸近有限值，\n" "要麼是 stepmx 太小。\n" #: src/main/optimize.c:671 msgid "hessian supplied is of the wrong length or mode, so ignored" msgstr "Hessian 的長度不正確或其狀態不正確，因此忽略不用" #: src/main/optimize.c:675 msgid "gradient supplied is of the wrong length or mode, so ignored" msgstr "梯度的長度或其狀態不正確，因此忽略不用" #: src/main/options.c:115 src/main/options.c:163 msgid "corrupted options list" msgstr "" #: src/main/options.c:125 #, fuzzy msgid "invalid printing width, used 80" msgstr "部分字串比對不正確" #: src/main/options.c:136 msgid "invalid printing digits, used 7" msgstr "" #: src/main/options.c:148 msgid "invalid value for \"device.ask.default\", using FALSE" msgstr "" #: src/main/options.c:365 #, fuzzy msgid "list argument has no valid names" msgstr "引數不是正確的模型" #: src/main/options.c:393 #, fuzzy, c-format msgid "invalid 'width' parameter, allowed %d...%d" msgstr "'trans' 參數不正確" #: src/main/options.c:400 #, fuzzy, c-format msgid "invalid 'digits' parameter, allowed %d...%d" msgstr "'trans' 參數不正確" #: src/main/options.c:407 #, c-format msgid "'expressions' parameter invalid, allowed %d...%d" msgstr "" #: src/main/options.c:414 src/main/options.c:422 src/main/options.c:428 #: src/main/options.c:436 src/main/options.c:443 src/main/options.c:448 #: src/main/options.c:455 src/main/options.c:461 src/main/options.c:467 #: src/main/options.c:474 src/main/options.c:480 src/main/options.c:486 #: src/main/options.c:497 src/main/options.c:504 src/main/options.c:510 #: src/main/options.c:518 src/main/options.c:525 src/main/options.c:532 #: src/main/options.c:539 src/main/options.c:546 src/main/options.c:554 #: src/main/options.c:563 src/main/options.c:566 #, fuzzy, c-format msgid "invalid value for '%s'" msgstr "'n' 的值不正確" #: src/main/options.c:559 src/main/options.c:581 msgid "\"par.ask.default\" has been replaced by \"device.ask.default\"" msgstr "" #: src/main/par.c:156 #, c-format msgid "invalid value specified for graphical parameter \"%s\"" msgstr "繪圖參數 \"%s\" 的值設得不正確" #: src/main/par.c:163 #, c-format msgid "graphical parameter \"%s\" has the wrong length" msgstr "繪圖參數 \"%s\" 的長度不正確" #: src/main/par.c:257 src/main/par.c:687 #, c-format msgid "graphical parameter \"%s\" cannot be set" msgstr "無法設定繪圖參數 \"%s\"" #: src/main/par.c:325 src/main/par.c:715 msgid "graphical parameter 'family' has a maximum length of 200 bytes" msgstr "繪圖參數 'family' 具有最大為 200 位元組的長度" #: src/main/par.c:454 msgid "parameter \"mfg\" has the wrong length" msgstr "參數 \"mfg\" 的長度不正確" #: src/main/par.c:462 msgid "parameter \"i\" in \"mfg\" is out of range" msgstr "\"mfg\" 中的參數 \"i\" 超出範圍" #: src/main/par.c:464 msgid "parameter \"j\" in \"mfg\" is out of range" msgstr "\"mfg\" 中的參數 \"j\" 超出範圍" #: src/main/par.c:469 msgid "value of nr in \"mfg\" is wrong and will be ignored" msgstr "\"mfg\" 中的 nr 值不正確，忽略不用" #: src/main/par.c:471 msgid "value of nc in \"mfg\" is wrong and will be ignored" msgstr "\"mfg\" 中的 nc 值不正確，忽略不用" #: src/main/par.c:497 #, fuzzy msgid "calling par(new=TRUE) with no plot" msgstr "不繪圖就不能呼叫 par(new=)" #: src/main/par.c:679 src/main/par.c:1092 #, c-format msgid "graphical parameter \"%s\" is obsolete" msgstr "繪圖參數 \"%s\" 已過時" #: src/main/par.c:683 src/main/par.c:1096 #, c-format msgid "\"%s\" is not a graphical parameter" msgstr "\"%s\" 不是一個繪圖參數" #: src/main/par.c:1149 msgid "invalid argument passed to par()" msgstr "傳給 par() 的引數無效" #: src/main/par.c:1208 #, c-format msgid "too many rows in layout, limit %d" msgstr "layout 中的列數太多, 極值為 %d" #: src/main/par.c:1214 #, c-format msgid "too many columns in layout, limit %d" msgstr "layout 中的行數太多, 極值為 %d" #: src/main/par.c:1216 #, c-format msgid "too many cells in layout, limit %d" msgstr "layout 中的元素太多, 極值為 %d" #: src/main/paste.c:74 src/main/paste.c:284 msgid "invalid separator" msgstr "分隔符號不正確" #: src/main/paste.c:109 src/main/paste.c:305 msgid "non-string argument to Internal paste" msgstr "內部貼上的引數不是字串" #: src/main/paste.c:363 msgid "first argument must be atomic" msgstr "第一個引數必須是基元" #: src/main/paste.c:533 msgid "Impossible mode ( x )" msgstr "這種狀態 (x) 是不可能的" #: src/main/paste.c:621 msgid "atomic vector arguments only" msgstr "只能用基元向量引數" #: src/main/platform.c:296 src/main/platform.c:314 msgid "invalid filename specification" msgstr "檔案名稱設定不正確" #: src/main/platform.c:440 src/main/platform.c:493 msgid "write error during file append" msgstr "檔案附加時寫入發生錯誤" #: src/main/platform.c:458 msgid "nothing to append to" msgstr "沒有可以附加的檔案" #: src/main/platform.c:460 msgid "'outFile' must be a single file" msgstr "'outfile' 必須是單一檔案" #: src/main/platform.c:522 src/main/platform.c:816 msgid "invalid filename argument" msgstr "filename 引數不正確" #: src/main/platform.c:534 #, fuzzy, c-format msgid "cannot create file '%s', reason '%s'" msgstr "無法建立先進先出 '%s'，原因是 '%s'" #: src/main/platform.c:549 src/main/platform.c:587 src/main/platform.c:653 msgid "invalid first filename" msgstr "第一個檔案名稱不正確" #: src/main/platform.c:561 #, fuzzy, c-format msgid "cannot remove file '%s', reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/main/platform.c:589 src/main/platform.c:655 msgid "invalid second filename" msgstr "第二個檔案名稱不正確" #: src/main/platform.c:591 src/main/platform.c:657 msgid "nothing to link" msgstr "沒有可以連結的檔案" #: src/main/platform.c:617 #, fuzzy, c-format msgid "cannot symlink '%s' to '%s', reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/main/platform.c:625 msgid "symlinks are not supported on this platform" msgstr "這個平台不支援符號連結" #: src/main/platform.c:675 #, fuzzy, c-format msgid "cannot link '%ls' to '%ls', reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/main/platform.c:695 #, fuzzy, c-format msgid "cannot link '%s' to '%s', reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/main/platform.c:704 #, fuzzy msgid "(hard) links are not supported on this platform" msgstr "這個平台不支援符號連結" #: src/main/platform.c:735 msgid "'from' and 'to' are of different lengths" msgstr "" #: src/main/platform.c:746 src/main/platform.c:756 #, fuzzy msgid "expanded 'from' name too long" msgstr "擴充的 source 名太長" #: src/main/platform.c:750 src/main/platform.c:760 #, fuzzy msgid "expanded 'to' name too long" msgstr "擴充的 source 名太長" #: src/main/platform.c:764 #, fuzzy, c-format msgid "cannot rename file '%s' to '%s', reason '%s'" msgstr "無法建立先進先出 '%s'，原因是 '%s'" #: src/main/platform.c:1087 msgid "invalid 'pattern' regular expression" msgstr "'pattern' 正規表示式不正確" #: src/main/platform.c:1190 msgid "unable to determine R home location" msgstr "無法確定 R 家目錄位置" #: src/main/platform.c:1242 msgid "file name too long" msgstr "檔案名稱太長" #: src/main/platform.c:1431 src/main/platform.c:1475 src/main/sysutils.c:1608 #: src/main/sysutils.c:1622 msgid "internal out-of-memory condition" msgstr "" #: src/main/platform.c:1471 src/main/sysutils.c:1618 #, fuzzy, c-format msgid "read error on '%s'" msgstr "讀取錯誤" #: src/main/platform.c:1637 msgid "setting 'LC_NUMERIC' may cause R to function strangely" msgstr "正在設定 'LC_NUMERIC' 可能會使得 R 的運作異常" #: src/main/platform.c:1671 #, fuzzy, c-format msgid "OS reports request to set locale to \"%s\" cannot be honored" msgstr "作業系統回報無法實現執行請求" #: src/main/platform.c:1971 msgid "'hostname' must be a character vector of length 1" msgstr "'hostname' 必須是長度為 1 的字元向量" #: src/main/platform.c:1977 #, c-format msgid "nsl() was unable to resolve host '%s'" msgstr "nsl() 無法分辨主機 '%s'" #: src/main/platform.c:1984 msgid "unknown format returned by gethostbyname" msgstr "gethostbyname 回傳了錯誤的格式" #: src/main/platform.c:1993 msgid "nsl() is not supported on this platform" msgstr "本平台不支援 nsl()" #: src/main/platform.c:2042 #, c-format msgid "'%s' already exists" msgstr "'%s' 已存在" #: src/main/platform.c:2045 #, fuzzy, c-format msgid "cannot create dir '%s', reason '%s'" msgstr "無法建立先進先出 '%s'，原因是 '%s'" #: src/main/platform.c:2088 #, fuzzy, c-format msgid "'%ls' already exists" msgstr "'%s' 已存在" #: src/main/platform.c:2091 #, fuzzy, c-format msgid "cannot create dir '%ls', reason '%s'" msgstr "無法建立先進先出 '%s'，原因是 '%s'" #: src/main/platform.c:2121 #, fuzzy, c-format msgid "problem creating directory %ls: %s" msgstr "啟動編輯器 %s 時出了問題" #: src/main/platform.c:2136 #, fuzzy, c-format msgid "problem reading dir %ls: %s" msgstr "啟動編輯器 %s 時出了問題" #: src/main/platform.c:2149 #, c-format msgid "problem copying %ls to %ls: %s" msgstr "" #: src/main/platform.c:2265 #, fuzzy, c-format msgid "problem creating directory %s: %s" msgstr "啟動編輯器 %s 時出了問題" #: src/main/platform.c:2279 #, fuzzy, c-format msgid "problem reading directory %s: %s" msgstr "啟動編輯器 %s 時出了問題" #: src/main/platform.c:2295 #, c-format msgid "problem copying %s to %s: %s" msgstr "" #: src/main/platform.c:2417 #, fuzzy msgid "'mode' must be of length at least one" msgstr "'hadj' 的長度必須為 1" #: src/main/platform.c:2484 #, fuzzy msgid "insufficient OS support on this platform" msgstr "本平台不支援 nsl()" #: src/main/plot.c:109 msgid "only NA allowed in logical plotting symbol" msgstr "邏輯繪圖符號中只允許用 NA" #: src/main/plot.c:111 msgid "invalid plotting symbol" msgstr "繪圖符號不正確" #: src/main/plot.c:202 src/modules/X11/devX11.c:1536 msgid "invalid font specification" msgstr "字型設定不正確" #: src/main/plot.c:279 msgid "invalid 'vfont' value [typeface]" msgstr "'vfont' 值不正確 [typeface]" #: src/main/plot.c:303 #, fuzzy, c-format msgid "invalid 'vfont' value [typeface = %d, fontindex = %d]" msgstr "'vfont' 值不正確 [fontindex]" #: src/main/plot.c:377 msgid "invalid graphics parameter" msgstr "繪圖參數不正確" #: src/main/plot.c:466 msgid "at least 3 arguments required" msgstr "至少需要三個引數" #: src/main/plot.c:481 msgid "\"log=\" specification must be character" msgstr "\"log=\" 必須設定成字元" #: src/main/plot.c:492 #, c-format msgid "invalid \"log=%s\" specification" msgstr "\"log=%s\" 設定不正確" #: src/main/plot.c:507 msgid "NAs not allowed in 'xlim'" msgstr "'xlim' 中不允許 NA" #: src/main/plot.c:513 msgid "need finite 'xlim' values" msgstr "'xlim' 值不能是無限的" #: src/main/plot.c:519 msgid "NAs not allowed in 'ylim'" msgstr "'ylim' 中不允許 NA" #: src/main/plot.c:525 msgid "need finite 'ylim' values" msgstr "'ylim' 值不能是無限的" #: src/main/plot.c:531 msgid "Logarithmic axis must have positive limits" msgstr "對數座標不能有負的極值" #: src/main/plot.c:648 msgid "invalid type for axis labels" msgstr "座標標記類型不正確" #: src/main/plot.c:923 #, c-format msgid "invalid axis number %d" msgstr "座標數目 %d 不正確" #: src/main/plot.c:1013 msgid "'hadj' must be of length one" msgstr "'hadj' 的長度必須為 1" #: src/main/plot.c:1020 src/main/plot.c:2572 msgid "zero length 'padj' specified" msgstr "'padj' 長度不能為零" #: src/main/plot.c:1089 #, fuzzy msgid "'labels' is supplied and not 'at'" msgstr "'label' 已提供而非 'at'" #: src/main/plot.c:1093 #, fuzzy, c-format msgid "'at' and 'labels' lengths differ, %d != %d" msgstr "'at' 和 'label' 的長度不同，%d!=%d" #: src/main/plot.c:1110 msgid "no locations are finite" msgstr "不存在有限的位置" #: src/main/plot.c:1464 msgid "invalid plotting structure" msgstr "繪圖結構不正確" #: src/main/plot.c:1466 #, c-format msgid "'x' and 'y' lengths differ in %s()" msgstr "%s() 中的 'x' 和 'y' 的長度不一樣" #: src/main/plot.c:1477 #, c-format msgid "plot type '%s' will be truncated to first character" msgstr "繪圖類型 '%s' 被截短成第一個字元" #: src/main/plot.c:1481 src/main/plot.c:3182 msgid "invalid plot type" msgstr "繪圖類型不正確" #: src/main/plot.c:1681 #, c-format msgid "invalid plot type '%c'" msgstr "繪圖類型 '%c' 不正確" #: src/main/plot.c:1741 msgid "invalid third argument" msgstr "第三個引數不正確" #: src/main/plot.c:1749 msgid "invalid fourth argument" msgstr "第四個引數不正確" #: src/main/plot.c:1757 msgid "cannot mix zero-length and non-zero-length coordinates" msgstr "" #: src/main/plot.c:1946 #, fuzzy msgid "unable to allocate memory (in GPath)" msgstr "無法指派記憶體 (GPolygon)" #: src/main/plot.c:1952 #, fuzzy msgid "invalid x or y (in GPath)" msgstr "RNGkind 中的 Normal 類別不正確" #: src/main/plot.c:2075 msgid "invalid arrow head length" msgstr "箭頭長度不正確" #: src/main/plot.c:2080 msgid "invalid arrow head angle" msgstr "箭頭角度不正確" #: src/main/plot.c:2085 msgid "invalid arrow head specification" msgstr "箭頭設定不正確" #: src/main/plot.c:2250 src/main/plot.c:3324 msgid "zero length 'labels'" msgstr "'labels' 的長度不能為零" #: src/main/plot.c:2324 msgid "no coordinates were supplied" msgstr "沒有座標" #: src/main/plot.c:2530 msgid "zero length 'text' specified" msgstr "'text' 長度不能設成零" #: src/main/plot.c:2536 msgid "zero length 'side' specified" msgstr "'side' 長度不能設成零" #: src/main/plot.c:2543 msgid "zero length 'line' specified" msgstr "'line' 長度不能設成零" #: src/main/plot.c:2551 msgid "zero length 'outer' specified" msgstr "'outer' 長度不能設成零" #: src/main/plot.c:2558 msgid "zero length 'at' specified" msgstr "'at' 長度不能設成零" #: src/main/plot.c:2565 msgid "zero length 'adj' specified" msgstr "'adj' 長度不能設成零" #: src/main/plot.c:2579 msgid "zero length 'cex' specified" msgstr "'cex' 長度不能設成零" #: src/main/plot.c:2587 msgid "zero length 'col' specified" msgstr "'col' 長度不能設成零" #: src/main/plot.c:2594 msgid "zero length 'font' specified" msgstr "'font' 長度不能設成零" #: src/main/plot.c:2957 msgid "invalid a=, b= specification" msgstr "a=, b= 設定不正確" #: src/main/plot.c:2966 msgid "'a' and 'b' must be finite" msgstr "'a' 和 'b' 的值必須是有限的" #: src/main/plot.c:3177 msgid "invalid number of points in locator()" msgstr "locator() 中點的數目不正確" #: src/main/plot.c:3313 msgid "invalid number of points in identify()" msgstr "identify() 中點的數目不正確" #: src/main/plot.c:3315 msgid "incorrect argument type" msgstr "引數類型不正確" #: src/main/plot.c:3327 msgid "different argument lengths" msgstr "引數長度不一樣" #: src/main/plot.c:3329 msgid "more 'labels' than points" msgstr "" #: src/main/plot.c:3382 #, fuzzy, c-format msgid "warning: no point within %.2f inches\n" msgstr "警告: 沒有 %.2f 英呎的點\n" #: src/main/plot.c:3388 msgid "warning: nearest point already identified\n" msgstr "警告: 已經找到了最近的點\n" #: src/main/plot.c:3472 msgid "invalid units" msgstr "單位不正確" #: src/main/plot.c:3651 src/main/plot.c:3761 msgid "invalid dendrogram input" msgstr "dendrogram 輸入不正確" #: src/main/plot.c:3818 msgid "invalid symbol parameter vector" msgstr "符號參數向量不正確" #: src/main/plot.c:3841 msgid "invalid symbol coordinates" msgstr "符號座標不正確" #: src/main/plot.c:3849 msgid "x/y/parameter length mismatch" msgstr "x/y/ 參數長度不一樣" #: src/main/plot.c:3868 msgid "invalid circles data" msgstr "圓形資料不正確" #: src/main/plot.c:3870 src/main/plot.c:3889 src/main/plot.c:3913 #: src/main/plot.c:3942 msgid "invalid symbol parameter" msgstr "符號參數不正確" #: src/main/plot.c:3887 msgid "invalid squares data" msgstr "正方形資料不正確" #: src/main/plot.c:3911 msgid "invalid rectangles data (need 2 columns)" msgstr "長方形資料不正確 (需要兩欄)" #: src/main/plot.c:3940 msgid "invalid stars data" msgstr "星形資料不正確" #: src/main/plot.c:3981 msgid "invalid thermometers data (need 3 or 4 columns)" msgstr "溫度計資料不正確 (需要三或四欄)" #: src/main/plot.c:3984 #, c-format msgid "invalid thermometers[,%s]" msgstr "溫度計[,%s] 不正確" #: src/main/plot.c:3987 #, c-format msgid "thermometers[,%s] not in [0,1] -- may look funny" msgstr "溫度計[,%s] 在 [0,1] 範圍外 -- 看起來會有點不正確" #: src/main/plot.c:3990 msgid "invalid thermometers[,1:2]" msgstr "溫度計[,1:2]" #: src/main/plot.c:4029 msgid "invalid boxplots data (need 5 columns)" msgstr "boxplots 資料不正確 (需要五欄)" #: src/main/plot.c:4038 msgid "boxplots[,5] outside [0,1] -- may look funny" msgstr "boxplots[,5] 在 [0,1] 範圍外 -- 看起來會有點不正確" #: src/main/plot.c:4040 msgid "invalid boxplots[, 1:4]" msgstr "boxplots[, 1:4] 不正確" #: src/main/plot.c:4086 msgid "invalid symbol type" msgstr "符號類型不正確" #: src/main/plot.c:4126 src/main/plot.c:4128 src/main/plot.c:4133 #: src/main/plot.c:4135 #, fuzzy, c-format msgid "incorrect length for '%s' argument" msgstr "'mode' 引數的長度不正確" #: src/main/plot.c:4152 #, fuzzy msgid "unable to allocate memory (in do_xspline)" msgstr "無法指派記憶體 (GPolygon)" #: src/main/plot3d.c:713 src/main/plot3d.c:998 msgid "contour(): circular/long seglist -- bug.report()!" msgstr "contour():圓的/長的 seglist -- bug.report()!" #: src/main/plot3d.c:793 src/main/plot3d.c:1443 msgid "all z values are equal" msgstr "所有的 z 值都一樣" #: src/main/plot3d.c:795 src/main/plot3d.c:1445 msgid "all z values are NA" msgstr "所有的 z 值都是 NA" #: src/main/plot3d.c:1407 src/main/plot3d.c:1663 msgid "insufficient 'x' or 'y' values" msgstr "'x' 或 'y' 值大小不夠" #: src/main/plot3d.c:1410 src/main/plot3d.c:1666 msgid "dimension mismatch" msgstr "維度不相符" #: src/main/plot3d.c:1413 src/main/plot3d.c:1669 msgid "no contour values" msgstr "無等高值" #: src/main/plot3d.c:1417 msgid "missing 'x' values" msgstr "缺少 'x' 值" #: src/main/plot3d.c:1419 msgid "increasing 'x' values expected" msgstr "'x' 值應加大" #: src/main/plot3d.c:1424 msgid "missing 'y' values" msgstr "缺少 'y' 值" #: src/main/plot3d.c:1426 msgid "increasing 'y' values expected" msgstr "'y' 值應加大" #: src/main/plot3d.c:1431 msgid "invalid NA contour values" msgstr "NA 等高值不正確" #: src/main/plot3d.c:1733 msgid "invalid x / y values or limits" msgstr "x/y 的值或極值不正確" #: src/main/plot3d.c:1735 msgid "invalid contour levels: must be strictly increasing" msgstr "等高層次不正確: 必須嚴格增加" #: src/main/plot3d.c:2397 src/main/plot3d.c:2410 msgid "Axis orientation not calculated" msgstr "無法計算座標方位" #: src/main/plot3d.c:2429 msgid "too few parameters" msgstr "參數太少" #: src/main/plot3d.c:2461 msgid "invalid 'x' limits" msgstr "'x' 極值不正確" #: src/main/plot3d.c:2463 msgid "invalid 'y' limits" msgstr "'y' 極值不正確" #: src/main/plot3d.c:2465 msgid "invalid 'z' limits" msgstr "'z' 極值不正確" #: src/main/plot3d.c:2486 msgid "'xlab' must be a character vector of length 1" msgstr "'xlab' 必須是長度為 1 的字元向量" #: src/main/plot3d.c:2488 msgid "'ylab' must be a character vector of length 1" msgstr "'ylab' 必須是長度為 1 的字元向量" #: src/main/plot3d.c:2490 msgid "'zlab' must be a character vector of length 1" msgstr "'zlab' 必須是長度為 1 的字元向量" #: src/main/plot3d.c:2510 msgid "invalid viewing parameters" msgstr "viewing 參數不正確" #: src/main/plotmath.c:306 #, fuzzy msgid "invalid `which' in TeX" msgstr "'which' 設定不正確" #: src/main/plotmath.c:333 #, fuzzy msgid "invalid math style encountered" msgstr "座標數目 %d 不正確" #: src/main/plotmath.c:1261 src/main/plotmath.c:1366 src/main/plotmath.c:2663 #, fuzzy msgid "invalid mathematical annotation" msgstr "內部函數不正確" #: src/main/plotmath.c:1670 #, fuzzy msgid "invalid accent" msgstr "引數不正確" #: src/main/plotmath.c:1964 #, fuzzy msgid "invalid group delimiter" msgstr "'x' 極值不正確" #: src/main/plotmath.c:1991 src/main/plotmath.c:2137 #, fuzzy msgid "invalid group specification" msgstr "字型設定不正確" #: src/main/plotmath.c:2062 #, fuzzy msgid "group is incomplete" msgstr "顯示串列重新整理時不完整" #: src/main/plotmath.c:3150 #, fuzzy msgid "Metric information not available for this family/device" msgstr "此連結不能被截短" #: src/main/print.c:143 src/main/print.c:243 msgid "invalid 'na.print' specification" msgstr "'na.print' 設定不正確" #: src/main/print.c:152 msgid "invalid row labels" msgstr "列標記不正確" #: src/main/print.c:154 msgid "invalid column labels" msgstr "行標記不正確" #: src/main/print.c:178 #, fuzzy msgid "non-function argument to .Internal(print.function(.))" msgstr "內部貼上的引數不是字串" #: src/main/print.c:253 msgid "'gap' must be non-negative integer" msgstr "'gap' 必須是正整數" #: src/main/print.c:277 msgid "invalid 'tryS4' internal argument" msgstr "'tryS4' 內部引數不正確" #: src/main/print.c:1009 msgid "invalid character length in dblepr" msgstr "dblepr 字元長度不正確" #: src/main/print.c:1027 msgid "invalid character length in intpr" msgstr "intpr 字元長度不正確" #: src/main/print.c:1046 msgid "invalid character length in realpr" msgstr "realpr 字元長度不正確" #: src/main/print.c:1056 msgid "memory allocation error in realpr" msgstr "realpr 記憶體指派錯誤" #: src/main/print.c:1072 #, c-format msgid "BLAS/LAPACK routine '%6s' gave error code %d" msgstr "BLAS/LAPACK 例行程式 '%6s' 產生了錯誤碼 %d" #: src/main/printarray.c:483 msgid "too few row labels" msgstr "列標記不夠" #: src/main/printarray.c:485 msgid "too few column labels" msgstr "行標記不夠" #: src/main/printarray.c:519 #, c-format msgid " [ reached getOption(\"max.print\") -- omitted last row ]]\n" msgid_plural " [ reached getOption(\"max.print\") -- omitted %d rows ]]\n" msgstr[0] "" msgstr[1] "" #: src/main/qsort.c:50 msgid "argument is not a numeric vector" msgstr "引數不是數值向量" #: src/main/random.c:82 src/main/random.c:99 src/main/random.c:156 #: src/main/random.c:182 src/main/random.c:246 src/main/random.c:260 msgid "NAs produced" msgstr "產生了 NA" #: src/main/random.c:96 msgid "internal error in do_random1" msgstr "do_random1 產生了內部錯誤" #: src/main/random.c:179 msgid "internal error in do_random2" msgstr "do_random2 產生了內部錯誤" #: src/main/random.c:257 msgid "internal error in do_random3" msgstr "do_random3 產生了內部錯誤" #: src/main/random.c:440 msgid "NA in probability vector" msgstr "機率向量中有 NA" #: src/main/random.c:442 msgid "non-positive probability" msgstr "出現非正值機率" #: src/main/random.c:449 msgid "too few positive probabilities" msgstr "正值機率太少" #: src/main/random.c:478 #, fuzzy msgid "cannot take a sample larger than the population when 'replace = FALSE'" msgstr "當 'replace = FALSE' 時不能取比總體還要大的樣本" #: src/main/random.c:487 msgid "incorrect number of probabilities" msgstr "機率數目不正確" #: src/main/random.c:522 msgid "invalid first argument 'n'" msgstr "第一引數 'n' 不正確" #: src/main/random.c:524 msgid "invalid second argument 'size'" msgstr "第二引數 'size' 不正確" #: src/main/relop.c:101 #, c-format msgid "comparison (%d) is possible only for atomic and list types" msgstr "只有基元或串列類型才能做比較 (%d)" #: src/main/relop.c:106 msgid "comparison is not allowed for expressions" msgstr "運算式不能作比較" #: src/main/relop.c:195 msgid "comparison of these types is not implemented" msgstr "這些類型的比較還沒有實作" #: src/main/relop.c:396 msgid "invalid comparison with complex values" msgstr "不能與複數值進行比較" #: src/main/saveload.c:199 src/main/saveload.c:204 src/main/saveload.c:213 #: src/main/saveload.c:222 src/main/saveload.c:231 src/main/saveload.c:240 #: src/main/saveload.c:244 src/main/saveload.c:253 src/main/saveload.c:1370 #: src/main/saveload.c:1375 src/main/saveload.c:1419 src/main/saveload.c:1487 #: src/main/saveload.c:1496 src/main/serialize.c:330 src/main/serialize.c:337 #: src/main/serialize.c:2043 src/main/serialize.c:2051 msgid "read error" msgstr "讀取錯誤" #: src/main/saveload.c:331 msgid "a I read error occurred" msgstr "發生了 I 類別讀取錯誤" #: src/main/saveload.c:341 msgid "a R read error occurred" msgstr "發生了 R 類別讀取錯誤" #: src/main/saveload.c:351 msgid "a C read error occurred" msgstr "發生了 C 類別讀取錯誤" #: src/main/saveload.c:361 msgid "a S read error occurred" msgstr "發生了 S 類別讀取錯誤" #: src/main/saveload.c:386 src/main/saveload.c:394 src/main/saveload.c:402 #: src/main/saveload.c:1583 src/main/saveload.c:1591 msgid "a read error occurred" msgstr "發生了讀取錯誤" #: src/main/saveload.c:466 msgid "unresolved node during restore" msgstr "復原時遇到了無法解析的節點" #: src/main/saveload.c:487 #, c-format msgid "restore compatibility error - no version %d compatibility" msgstr "復原相容錯誤：沒有同版本 %d 相容的功能" #: src/main/saveload.c:571 src/main/saveload.c:639 msgid "bad SEXP type in data file" msgstr "資料檔案中 SEXP 類型發生錯誤" #: src/main/saveload.c:585 msgid "mismatch on types" msgstr "類型不符合" #: src/main/saveload.c:703 msgid "cannot save file position while restoring data" msgstr "復原資料的時候無法儲存檔案位置" #: src/main/saveload.c:716 msgid "cannot restore file position while restoring data" msgstr "復原資料的時候無法復原檔案位置" #: src/main/saveload.c:909 msgid "base namespace is not preserved in version 1 workspaces" msgstr "1 號版本工作空間不能保留基本名稱空間" #: src/main/saveload.c:911 msgid "cannot save namespace in version 1 workspaces" msgstr "1 號版本工作空間無法儲存名稱空間" #: src/main/saveload.c:913 #, fuzzy msgid "" "cannot save environment with locked/active bindings in version 1 workspaces" msgstr "1 號版本工作空間不能儲存鎖住的或是仍在用的繫結" #: src/main/saveload.c:937 msgid "cannot save weak references in version 1 workspaces" msgstr "1 號版本工作空間無法儲存弱型參考" #: src/main/saveload.c:1015 msgid "NewWriteVec called with non-vector type" msgstr "NewWriteVec 不適用於非向量類型" #: src/main/saveload.c:1078 msgid "cannot save byte code objects in version 1 workspaces" msgstr "1 號版本工作空間無法儲存位元組碼目的物件" #: src/main/saveload.c:1080 #, c-format msgid "NewWriteItem: unknown type %i" msgstr "NewWriteItem: 不明類型 %i" #: src/main/saveload.c:1210 msgid "NewReadVec called with non-vector type" msgstr "NewReadVec 不適用於非向量類型" #: src/main/saveload.c:1275 msgid "cannot read byte code objects from version 1 workspaces" msgstr "無法從 1 號版本工作空間中讀取位元組碼目的物件" #: src/main/saveload.c:1277 #, c-format msgid "NewReadItem: unknown type %i" msgstr "NewReadItem: 不明類型 %i" #: src/main/saveload.c:1429 msgid "out of memory reading ascii string" msgstr "讀取 ascii 字串時記憶體不足" #: src/main/saveload.c:1554 msgid "a binary read error occurred" msgstr "二進位讀取時發生了錯誤" #: src/main/saveload.c:1569 src/main/saveload.c:1670 msgid "out of memory reading binary string" msgstr "讀取二進位字串時記憶體不足" #: src/main/saveload.c:1574 msgid "a binary string read error occurred" msgstr "讀取二進位字串時發生了錯誤" #: src/main/saveload.c:1634 msgid "an xdr integer data write error occurred" msgstr "發生了 xdr 整數資料寫入錯誤" #: src/main/saveload.c:1641 msgid "an xdr integer data read error occurred" msgstr "發生了 xdr 整數資料讀取錯誤" #: src/main/saveload.c:1656 src/main/saveload.c:1675 msgid "an xdr string data write error occurred" msgstr "發生了 xdr 字串資料寫入錯誤" #: src/main/saveload.c:1683 msgid "an xdr real data write error occurred" msgstr "發生了 xdr 實數資料寫入錯誤" #: src/main/saveload.c:1690 msgid "an xdr real data read error occurred" msgstr "發生了 xdr 實數資料讀取錯誤" #: src/main/saveload.c:1697 msgid "an xdr complex data write error occurred" msgstr "發生了 xdr 複數資料寫入錯誤" #: src/main/saveload.c:1704 msgid "an xdr complex data read error occurred" msgstr "發生了 xdr 複數資料讀取錯誤" #: src/main/saveload.c:1772 src/main/serialize.c:1622 #: src/main/serialize.c:2218 src/modules/internet/internet.c:350 #: src/modules/internet/internet.c:408 src/modules/internet/internet.c:513 msgid "write failed" msgstr "寫入失敗" #: src/main/saveload.c:1898 msgid "restore file may be empty -- no data loaded" msgstr "復原檔案可能是空的 -- 沒有載入任何資料" #: src/main/saveload.c:1900 msgid "restore file may be from a newer version of R -- no data loaded" msgstr "復原檔案可能是由比本 R 版本要新的 R 所儲存的 -- 沒有載入任何資料" #: src/main/saveload.c:1902 msgid "bad restore file magic number (file may be corrupted) -- no data loaded" msgstr "復原檔案魔術數字發生錯誤 (檔案可能有損壞)-- 沒有載入任何資料" #: src/main/saveload.c:1928 src/main/saveload.c:2226 msgid "first argument must be a character vector" msgstr "第一引數必須是字元向量" #: src/main/saveload.c:2000 msgid "not a valid named list" msgstr "不是有效的具名串列" #: src/main/saveload.c:2007 src/main/saveload.c:2028 #, c-format msgid "'%s' looks like a pre-2.4.0 S4 object: please recreate it" msgstr "" #: src/main/saveload.c:2015 msgid "loaded data is not in pair list form" msgstr "載入資料不是成雙的串列形式" #: src/main/saveload.c:2051 msgid "first argument must be a file name" msgstr "第一引數必須是檔案名稱" #: src/main/saveload.c:2064 src/unix/edit.c:124 msgid "unable to open file" msgstr "無法開啟檔案" #: src/main/saveload.c:2096 src/main/saveload.c:2122 msgid "XDR write failed" msgstr "XDR 寫入失敗" #: src/main/saveload.c:2109 src/main/saveload.c:2134 msgid "XDR read failed" msgstr "XDR 讀取失敗" #: src/main/saveload.c:2145 #, fuzzy, c-format msgid "cannot save data -- unable to open '%s': %s" msgstr "無法儲存資料 -- 無法開啟 %s" #: src/main/saveload.c:2242 src/main/serialize.c:1825 #, c-format msgid "cannot save to connections in version %d format" msgstr "不可使用版本 %d 的格式來儲存連結" #: src/main/saveload.c:2265 src/main/serialize.c:1850 msgid "connection not open for writing" msgstr "無法開啟連結來進行寫入" #: src/main/saveload.c:2273 msgid "cannot save XDR format to a text-mode connection" msgstr "不能將XDR格式儲存到文字狀態連結" #: src/main/saveload.c:2283 src/main/serialize.c:1730 #: src/main/serialize.c:1744 src/main/serialize.c:1926 #: src/main/serialize.c:1948 msgid "error writing to connection" msgstr "連結寫入發生了錯誤" #: src/main/saveload.c:2344 src/main/serialize.c:1898 #, fuzzy msgid "connection not open for reading" msgstr "連結沒有開啟而不能讀" #: src/main/saveload.c:2345 #, fuzzy msgid "can only load() from a binary connection" msgstr "無法讀取二進位連結" #: src/main/saveload.c:2356 msgid "no input is available" msgstr "沒有可用的輸入" #: src/main/saveload.c:2366 msgid "" "the input does not start with a magic number compatible with loading from a " "connection" msgstr "輸入並非以從某個連接所載入的神奇數字開始" #: src/main/scan.c:464 #, c-format msgid "scan() expected '%s', got '%s'" msgstr "scan() 需要 '%s'，而不是 '%s'" #: src/main/scan.c:650 msgid "empty 'what' specified" msgstr "'what' 設定是空的" #: src/main/scan.c:701 #, c-format msgid "line %d did not have %d elements" msgstr "第 %d 列沒有 %d 個元素" #: src/main/scan.c:753 msgid "number of items read is not a multiple of the number of columns" msgstr "讀取的項目數必須是行數的倍數" #: src/main/scan.c:845 msgid "invalid 'strip.white' length" msgstr "'strip.white' 的長度不正確" #: src/main/scan.c:856 msgid "invalid 'sep' value: must be one byte" msgstr "'sep' 值不正確: 大小只能為一個位元組" #: src/main/scan.c:868 msgid "invalid decimal separator: must be one byte" msgstr "十進位分隔符號不正確: 大小只能為一個位元組" #: src/main/scan.c:873 msgid "invalid decimal separator" msgstr "十進位分隔符號不正確" #: src/main/scan.c:882 src/main/scan.c:1003 src/main/scan.c:1494 msgid "invalid quote symbol set" msgstr "引號符號集不正確" #: src/main/scan.c:1066 src/main/scan.c:1084 msgid "string terminated by newline or EOF" msgstr "字串尾是新的一列或是 EOF" #: src/main/scan.c:1204 msgid "the first argument must be of mode character" msgstr "第一引數的狀態必須是字元" #: src/main/scan.c:1436 #, c-format msgid "Selection: " msgstr "選擇: " #: src/main/scan.c:1524 src/main/scan.c:1536 #, fuzzy msgid "cannot allocate buffer in 'readTableHead'" msgstr "readTableHead 中無法指派緩衝區" #: src/main/scan.c:1546 msgid "\\ followed by EOF" msgstr "EOF 緊接於 \\ 之後" #: src/main/scan.c:1591 src/main/scan.c:1594 #, c-format msgid "incomplete final line found by readTableHeader on '%s'" msgstr "讀取 '%s' 的 TableHeader 時遇到了不完整的最後一列" #: src/main/scan.c:1702 msgid "'file' is not a connection" msgstr "'file' 不是連結" #: src/main/scan.c:1735 msgid "'dec' must be a single character" msgstr "'dec' 必須為單一字元" #: src/main/scan.c:1762 #, c-format msgid "corrupt data frame -- length of column %d does not not match nrows" msgstr "資料框毀損-- 行的長度 %d 與 nrows 不相等" #: src/main/scan.c:1808 msgid "corrupt matrix -- dims not not match length" msgstr "矩陣毀損 -- dims 與長度不相等" #: src/main/seq.c:46 msgid "unequal factor lengths" msgstr "因子長度不相等" #: src/main/seq.c:98 msgid "result would be too long a vector" msgstr "答案向量會太長" #: src/main/seq.c:144 src/main/seq.c:148 #, c-format msgid "numerical expression has %d elements: only the first used" msgstr "數值運算式一共有 %d 個元素: 只用了第一個" #: src/main/seq.c:146 #, fuzzy msgid "argument of length 0" msgstr "引數長度為零" #: src/main/seq.c:152 msgid "NA/NaN argument" msgstr "NA/NaN 引數" #: src/main/seq.c:256 #, fuzzy msgid "incorrect type for second argument" msgstr "rep() 的第二引數類型不正確" #: src/main/seq.c:259 msgid "attempt to replicate non-vector" msgstr "非向量不能被複製" #: src/main/seq.c:383 src/main/seq.c:390 src/main/seq.c:519 src/main/seq.c:696 #, fuzzy, c-format msgid "first element used of '%s' argument" msgstr "只用 'url' 引數的第一個元素" #: src/main/seq.c:517 #, fuzzy msgid "'length.out' must be a non-negative number" msgstr "'gap' 必須是正整數" #: src/main/seq.c:534 src/main/seq.c:596 src/main/seq.c:610 #, fuzzy msgid "'from' must be finite" msgstr "'a' 和 'b' 的值必須是有限的" #: src/main/seq.c:536 src/main/seq.c:598 src/main/seq.c:628 #, fuzzy msgid "'to' must be finite" msgstr "'a' 和 'b' 的值必須是有限的" #: src/main/seq.c:548 msgid "invalid '(to - from)/by' in 'seq'" msgstr "" #: src/main/seq.c:556 #, fuzzy msgid "'by' argument is much too small" msgstr "'file' 引數太長" #: src/main/seq.c:558 #, fuzzy msgid "wrong sign in 'by' argument" msgstr "'mode' 引數的長度不正確" #: src/main/seq.c:612 src/main/seq.c:630 #, fuzzy msgid "'by' must be finite" msgstr "'a' 和 'b' 的值必須是有限的" #: src/main/seq.c:694 #, fuzzy msgid "argument must be coercible to non-negative integer" msgstr "引數必須是環境物件" #: src/main/serialize.c:224 src/main/serialize.c:254 src/main/serialize.c:277 msgid "unknown or inappropriate output format" msgstr "不明或不適當的輸出格式" #: src/main/serialize.c:495 msgid "binary format is deprecated; using xdr instead" msgstr "二進位格式不再使用，替之用 xdr 格式" #: src/main/serialize.c:503 msgid "must specify ascii, binary, or xdr format" msgstr "必須設定 ascii、binary 或 xdr 格式之一" #: src/main/serialize.c:504 msgid "unknown output format" msgstr "不明的輸出格式" #: src/main/serialize.c:535 msgid "unknown input format" msgstr "不明的輸入格式" #: src/main/serialize.c:540 msgid "input format does not match specified format" msgstr "輸入格式與設定的格式不符合" #: src/main/serialize.c:740 msgid "no restore method available" msgstr "沒有復原的方法" #: src/main/serialize.c:770 msgid "names in persistent strings are currently ignored" msgstr "固有字串中的名稱現在不用" #: src/main/serialize.c:835 #, c-format msgid "'%s' may not be available when loading" msgstr "載入時 '%s' 也許不能用" #: src/main/serialize.c:842 msgid "namespaces may not be available when loading" msgstr "載入時名稱空間也許不能用" #: src/main/serialize.c:947 msgid "this version of R cannot write byte code objects" msgstr "本 R 版本無法寫入位元組碼目的物件" #: src/main/serialize.c:956 #, c-format msgid "WriteItem: unknown type %i" msgstr "WriteItem：不明的類型 %i" #: src/main/serialize.c:1126 #, c-format msgid "version %d not supported" msgstr "版本 %d 不支援" #: src/main/serialize.c:1154 msgid "reference index out of range" msgstr "參照索引超出範圍" #: src/main/serialize.c:1184 msgid "names in persistent strings are not supported yet" msgstr "目前不支援固有字串中的名稱" #: src/main/serialize.c:1395 msgid "this version of R cannot read byte code objects" msgstr "本 R 版本無法讀取位元組碼目的物件" #: src/main/serialize.c:1398 msgid "this version of R cannot read class references" msgstr "本 R 版本無法讀取類別參照" #: src/main/serialize.c:1400 msgid "this version of R cannot read generic function references" msgstr "本 R 版本無法讀取一般功能參照" #: src/main/serialize.c:1411 #, c-format msgid "ReadItem: unknown type %i, perhaps written by later version of R" msgstr "" #: src/main/serialize.c:1546 #, c-format msgid "" "cannot read unreleased workspace version %d written by experimental R %d.%d." "%d" msgstr "" "無法從由 R 實驗版本 %2$d.%3$d.%4$d 所寫入之尚未被釋放的工作空間版本 %1$d 中讀" "取資料" #: src/main/serialize.c:1550 #, c-format msgid "" "cannot read workspace version %d written by R %d.%d.%d; need R %d.%d.%d or " "newer" msgstr "" "無法從由 R 版本 %2$d.%3$d.%4$d 所寫入之工作空間版本 %1$d 中讀取資料；需要 R " "版本 %5$d.%6$d.%7$d 或更新" #: src/main/serialize.c:1629 #, fuzzy msgid "read failed" msgstr "XDR 讀取失敗" #: src/main/serialize.c:1692 #, fuzzy msgid "error reading from ascii connection" msgstr "從連結讀取時發生了錯誤" #: src/main/serialize.c:1694 #, fuzzy msgid "unexpected format in ascii connection" msgstr "無法從此連結讀取" #: src/main/serialize.c:1699 src/main/serialize.c:1713 msgid "error reading from connection" msgstr "從連結讀取時發生了錯誤" #: src/main/serialize.c:1754 msgid "only ascii format can be written to text mode connections" msgstr "只有 ascii 格式才能對文字狀態的連結進行寫入" #: src/main/serialize.c:1768 msgid "only ascii format can be read from text mode connections" msgstr "只有 ascii 格式才能從文字狀態的連結讀取" #: src/main/serialize.c:1823 src/main/serialize.c:1976 #: src/main/serialize.c:2114 msgid "bad version value" msgstr "不當的版本值" #: src/main/serialize.c:1848 #, fuzzy msgid "binary-mode connection required for ascii=FALSE" msgstr "二元運算需要兩個引數" #: src/main/serialize.c:2006 src/main/serialize.c:2033 #: src/main/serialize.c:2094 msgid "serialization is too large to store in a raw vector" msgstr "" #: src/main/serialize.c:2015 msgid "cannot allocate buffer" msgstr "無法指派緩衝區" #: src/main/serialize.c:2196 src/main/serialize.c:2265 msgid "not a proper file name" msgstr "檔案名稱不正確" #: src/main/serialize.c:2198 msgid "not a proper raw vector" msgstr "非適當純量向量" #: src/main/serialize.c:2219 msgid "could not determine file position" msgstr "無法確定檔案位置" #: src/main/serialize.c:2267 msgid "bad offset/length argument" msgstr "不當的位移/長度引數" #: src/main/serialize.c:2291 src/main/serialize.c:2304 #: src/main/serialize.c:2313 src/main/serialize.c:2323 #: src/main/serialize.c:2336 #, c-format msgid "seek failed on %s" msgstr "搜索 %s 失敗" #: src/main/serialize.c:2308 src/main/serialize.c:2317 #: src/main/serialize.c:2327 src/main/serialize.c:2340 #, c-format msgid "read failed on %s" msgstr "讀取 %s 失敗" #: src/main/serialize.c:2359 msgid "bad environment" msgstr "不當的環境" #: src/main/serialize.c:2361 msgid "bad variable names" msgstr "不當的變數名稱" #: src/main/sort.c:87 msgid "only atomic vectors can be tested to be sorted" msgstr "只有基元向量才能被試著排序" #: src/main/sort.c:309 src/main/sort.c:875 src/main/sort.c:973 msgid "'decreasing' must be TRUE or FALSE" msgstr "'increasing' 必須是 TRUE 或是 FALSE" #: src/main/sort.c:312 src/main/sort.c:564 msgid "only atomic vectors can be sorted" msgstr "只有基元向量才能被排序" #: src/main/sort.c:314 src/main/sort.c:566 src/main/sort.c:920 msgid "raw vectors cannot be sorted" msgstr "無法排序純量向量" #: src/main/sort.c:573 msgid "NA index" msgstr "NA 索引" #: src/main/sort.c:575 #, c-format msgid "index %d outside bounds" msgstr "索引 %d 在界限外" #: src/main/sort.c:884 #, c-format msgid "argument %d is not a vector" msgstr "引數 %d 不是向量" #: src/main/sort.c:886 msgid "argument lengths differ" msgstr "引數長度不同" #: src/main/sort.c:926 msgid "invalid ties.method for rank() [should never happen]" msgstr "rank() 的 ties.method 不正確 [這是不應該發生的]" #: src/main/sort.c:980 msgid "negative value in 'x'" msgstr "'x' 中有負值" #: src/main/sort.c:991 msgid "too large a range of values in 'x'" msgstr "'x' 中的值的範圍太大" #: src/main/source.c:134 #, fuzzy, c-format msgid "%s%d:%d: %s" msgstr "" "語法錯誤發生於\n" "%d: %s" #: src/main/source.c:139 #, fuzzy, c-format msgid "" "%s%d:%d: %s\n" "%d: %s\n" "%*s" msgstr "" "語法錯誤發生於\n" "%d: %s\n" "%d: %s" #: src/main/source.c:146 #, fuzzy, c-format msgid "" "%s%d:%d: %s\n" "%d: %s\n" "%d: %s\n" "%*s" msgstr "" "語法錯誤發生於\n" "%d: %s\n" "%d: %s" #: src/main/source.c:156 #, c-format msgid "%s" msgstr "" #: src/main/source.c:159 #, c-format msgid "%s in \"%s\"" msgstr "" #: src/main/source.c:163 #, fuzzy, c-format msgid "" "%s in:\n" "\"%s\n" "%s\"" msgstr "" "語法錯誤發生於:\n" "\"%s\n" "%s\"" #: src/main/source.c:210 msgid "coercion of 'text' to character was unsuccessful" msgstr "" #: src/main/source.c:226 #, fuzzy, c-format msgid "argument '%s = \"%s\"' will be ignored" msgstr "非正數的 'fill' 引數將會被忽略" #: src/main/split.c:38 msgid "first argument must be a vector" msgstr "第一引數必須是向量" #: src/main/split.c:40 msgid "second argument must be a factor" msgstr "第二引數必須是因子" #: src/main/split.c:45 msgid "Group length is 0 but data length > 0" msgstr "Group 長度為零但資料長度 > 0" #: src/main/split.c:47 msgid "data length is not a multiple of split variable" msgstr "資料長度不是 split 變數的倍數" #: src/main/split.c:56 msgid "factor has bad level" msgstr "" #: src/main/sprintf.c:93 #, c-format msgid "required resulting string length %d is > maximal %d" msgstr "" #: src/main/sprintf.c:101 #, fuzzy msgid "'fmt' is not a character vector" msgstr "'fmt' 必須是字元向量" #: src/main/sprintf.c:106 #, fuzzy, c-format msgid "only %d arguments are allowed" msgstr "只允許 100 個引數" #: src/main/sprintf.c:113 #, fuzzy, c-format msgid "invalid type of argument[%d]: '%s'" msgstr "'mode' 引數不正確" #: src/main/sprintf.c:124 src/main/sprintf.c:127 msgid "arguments cannot be recycled to the same length" msgstr "不是所有的引數都一樣長" #: src/main/sprintf.c:149 #, fuzzy, c-format msgid "'fmt' length exceeds maximal format length %d" msgstr "'fmt' 長度超過了緩衝區長度的最大值 %d" #: src/main/sprintf.c:167 #, fuzzy, c-format msgid "unrecognised format specification '%s'" msgstr "顏色設定不正確" #: src/main/sprintf.c:178 src/main/sprintf.c:184 src/main/sprintf.c:197 #: src/main/sprintf.c:204 #, c-format msgid "reference to non-existent argument %d" msgstr "參照不存在的引數 %d" #: src/main/sprintf.c:216 #, fuzzy msgid "at most one asterisk '*' is supported in each conversion specification" msgstr "在任一轉換指定中最多只支援一個星號 '*'" #: src/main/sprintf.c:226 #, fuzzy msgid "argument for '*' conversion specification must be a number" msgstr "'*' 轉換指定的引數必須是一個數字" #: src/main/sprintf.c:255 #, fuzzy msgid "the '%*' constructed 'fmt2' length exceeds maximum of %d" msgstr "'fmt' 長度超過了緩衝區長度的最大值 %d" #: src/main/sprintf.c:264 msgid "coercion has changed vector length to 0" msgstr "強制變更時將向量長度改為 0" #: src/main/sprintf.c:337 src/main/sprintf.c:351 src/main/sprintf.c:365 #: src/main/sprintf.c:400 #, fuzzy, c-format msgid "invalid format '%s'; %s" msgstr "'n' 的值不正確" #: src/main/sprintf.c:338 #, c-format msgid "use format %d or %i for logical objects" msgstr "邏輯目的物件套用格式 %d 或 %i" #: src/main/sprintf.c:352 #, fuzzy, c-format msgid "use format %d, %i, %o, %x or %X for integer objects" msgstr "整數目的物件套用格式 %d、%i、%x 或 %X" #: src/main/sprintf.c:366 #, fuzzy, c-format msgid "use format %f, %e, %g or %a for numeric objects" msgstr "數值目的物件套用格式 %f、%e 或 %g" #: src/main/sprintf.c:401 #, c-format msgid "use format %s for character objects" msgstr "字元目的物件套用格式 %s" #: src/main/sprintf.c:406 #, fuzzy, c-format msgid "likely truncation of character string to %d characters" msgstr "字串很可能被截短" #: src/main/sprintf.c:415 msgid "unsupported type" msgstr "不支援此一類型" #: src/main/startup.c:66 msgid "R_LibraryFileName: buffer too small" msgstr "R_LibraryFileName: 緩衝區太小" #: src/main/subassign.c:105 msgid "attempt to enlarge non-vector" msgstr "不能加大非向量" #: src/main/subassign.c:110 #, c-format msgid "assignment outside vector/list limits (extending from %d to %d)" msgstr "不能在向量/串列極值外賦值(%d 加大到 %d)" #: src/main/subassign.c:357 #, c-format msgid "incompatible types (from %s to %s) in subassignment type fix" msgstr "下賦值 fix 類型中有不相容的類型 (從 %s 到 %s)" #: src/main/subassign.c:456 src/main/subassign.c:731 src/main/subassign.c:734 #: src/main/subassign.c:1020 msgid "NAs are not allowed in subscripted assignments" msgstr "下標賦值中不允許 NA" #: src/main/subassign.c:474 src/main/subassign.c:745 src/main/subassign.c:1012 #: src/main/subassign.c:1527 #, fuzzy msgid "replacement has length zero" msgstr "引數長度為零" #: src/main/subassign.c:476 src/main/subassign.c:747 src/main/subassign.c:1014 msgid "number of items to replace is not a multiple of replacement length" msgstr "被替換的項目不是替換值長度的倍數" #: src/main/subassign.c:713 msgid "incorrect number of subscripts on matrix" msgstr "矩陣中的下標數目不正確" #: src/main/subassign.c:964 #, c-format msgid "incompatible types (from %s to %s) in matrix subset assignment" msgstr "矩陣子集賦值中有不相容的類型 (從 %s 到 %s)" #: src/main/subassign.c:1148 #, c-format msgid "incompatible types (from %s to %s) in array subset assignment" msgstr "陣列子集賦值有不相容的類型 (從 %s 到 %s)" #: src/main/subassign.c:1182 src/main/subassign.c:1202 #, fuzzy msgid "invalid subscript in list assign" msgstr "串列賦值中的下標數目不正確" #: src/main/subassign.c:1195 msgid "invalid number of subscripts to list assign" msgstr "串列賦值中的下標數目不正確" #: src/main/subassign.c:1282 msgid "SubAssignArgs: invalid number of arguments" msgstr "SubAssignArgs: 引數數目不正確" #: src/main/subassign.c:1394 msgid "result is zero-length and so cannot be a language object" msgstr "" #: src/main/subassign.c:1499 msgid "" "[[<- defined for objects of type \"S4\" only for subclasses of environment" msgstr "" #: src/main/subassign.c:1505 msgid "wrong args for environment subassignment" msgstr "環境下賦值的引數不正確" #: src/main/subassign.c:1529 msgid "more elements supplied than there are to replace" msgstr "用來替換的元素比所要替換的值多" #: src/main/subassign.c:1531 msgid "[[ ]] with missing subscript" msgstr "[[ ]] 缺少下標" #: src/main/subassign.c:1542 src/main/subassign.c:1559 msgid "[[ ]] subscript out of bounds" msgstr "[[ ]] 下標在界限外" #: src/main/subassign.c:1548 src/main/subassign.c:1729 msgid "[[ ]] improper number of subscripts" msgstr "[[ ]] 下標數目不正確" #: src/main/subassign.c:1695 #, c-format msgid "incompatible types (from %s to %s) in [[ assignment" msgstr " [[ 賦值中有不相容的類型 (從 %s 到 %s)" #: src/main/subassign.c:1739 #, c-format msgid "[[ ]] subscript (%d) out of bounds" msgstr "[[ ]] 下標 (%d) 在界限外" #: src/main/subassign.c:1792 src/main/subscript.c:134 src/main/subscript.c:136 #: src/main/subscript.c:240 src/main/subscript.c:242 src/main/subscript.c:615 #: src/main/subscript.c:617 src/main/subscript.c:716 src/main/subscript.c:718 #: src/main/subset.c:995 #, fuzzy, c-format msgid "invalid subscript type '%s'" msgstr "下標類型不正確" #: src/main/subassign.c:1837 msgid "no method for assigning subsets of this S4 class" msgstr "" #: src/main/subassign.c:1895 msgid "Coercing LHS to a list" msgstr "把公式左側強迫變成串列" #: src/main/subscript.c:50 src/main/subscript.c:70 src/main/subscript.c:163 msgid "attempt to select less than one element" msgstr "至少要選擇一個元素" #: src/main/subscript.c:54 src/main/subscript.c:67 src/main/subscript.c:161 #: src/main/subscript.c:258 msgid "attempt to select more than one element" msgstr "最多只能選擇一個元素" #: src/main/subscript.c:167 msgid "internal error in use of recursive indexing" msgstr "用遞迴索引時發生了內部錯誤" #: src/main/subscript.c:221 #, c-format msgid "further partial match of '%s' to '%s'" msgstr "" #: src/main/subscript.c:256 #, c-format msgid "recursive indexing failed at level %d\n" msgstr "遞迴索引在 %d 層失敗\n" #: src/main/subscript.c:263 #, c-format msgid "no such index at level %d\n" msgstr "在 %d 層沒有此一索引\n" #: src/main/subscript.c:287 msgid "incorrect number of columns in matrix subscript" msgstr "矩陣下標中行數不正確" #: src/main/subscript.c:305 msgid "negative values are not allowed in a matrix subscript" msgstr "矩陣下標中不允許負值" #: src/main/subscript.c:378 msgid "(subscript) logical subscript too long" msgstr "(下標) 邏輯下標太長" #: src/main/subscript.c:463 msgid "only 0's may be mixed with negative subscripts" msgstr "只有負數下標中才能有 0" #: src/main/subscript.c:528 msgid "character vector element does not have type CHARSXP" msgstr "字元向量元素沒有 CHARSXP 類型" #: src/main/subscript.c:606 msgid "no 'dimnames' attribute for array" msgstr "陣列中沒有 'dimnames' 此一屬性" #: src/main/subscript.c:653 msgid "subscripting on non-vector" msgstr "非向量不能有下標" #: src/main/subset.c:275 src/main/subset.c:304 msgid "matrix subscripting not handled for this type" msgstr "此一類型無法處理矩陣下標" #: src/main/subset.c:461 msgid "array subscripting not handled for this type" msgstr "此一類型無法處理陣列下標" #: src/main/subset.c:720 msgid "incorrect number of dimensions" msgstr "維度數目不正確" #: src/main/subset.c:817 msgid "no index specified" msgstr "沒有指定的索引" #: src/main/subset.c:827 #, fuzzy msgid "this S4 class is not subsettable" msgstr "目的物件不是次集合表格" #: src/main/subset.c:833 msgid "wrong arguments for subsetting an environment" msgstr "取子集環境時的引數不正確" #: src/main/summary.c:26 #, fuzzy, c-format msgid "invalid 'type' (%s) of argument" msgstr "'mode' 引數不正確" #: src/main/summary.c:61 src/main/summary.c:578 #, fuzzy msgid "Integer overflow - use sum(as.numeric(.))" msgstr "sum(.) 中整數上溢；請用 sum(as.numeric(.))" #: src/main/summary.c:479 #, c-format msgid "internal error ('op = %d' in do_summary).\t Call a Guru" msgstr "內部錯誤 (do_summary 中的 'op = %d')。\t 請向專家請教" #: src/main/summary.c:686 #, fuzzy msgid "no non-missing arguments, returning NA" msgstr "min 中沒有無漏失的引數; 回傳 Inf" #: src/main/summary.c:689 msgid "no non-missing arguments to min; returning Inf" msgstr "min 中沒有無漏失的引數; 回傳 Inf" #: src/main/summary.c:691 msgid "no non-missing arguments to max; returning -Inf" msgstr "max 中沒有無漏失的引數；回傳 -Inf" #: src/main/summary.c:800 #, fuzzy msgid "argument to 'which' is not logical" msgstr "引數 'logarithm' 必須是邏輯值" #: src/main/summary.c:909 msgid "no input has determined the number of cases" msgstr "" #: src/main/summary.c:1012 msgid "not all arguments have the same length" msgstr "不是所有的引數都一樣長" #: src/main/summary.c:1031 #, fuzzy msgid "no arguments" msgstr "引數數目太少" #: src/main/summary.c:1042 src/main/summary.c:1059 #, fuzzy msgid "invalid input type" msgstr "無效的列類型" #: src/main/summary.c:1064 msgid "cannot mix 0-length vectors with others" msgstr "" #: src/main/sysutils.c:69 src/main/sysutils.c:83 #, c-format msgid "cannot determine file modification time of '%s'" msgstr "無法確定檔案 '%s' 的修改時間" #: src/main/sysutils.c:167 msgid "encoding of a filename cannot be 'bytes'" msgstr "" #: src/main/sysutils.c:170 src/main/sysutils.c:762 src/main/sysutils.c:777 #: src/main/sysutils.c:871 #, fuzzy, c-format msgid "unsupported conversion from '%s' in codepage %d" msgstr "不支援這種轉換" #: src/main/sysutils.c:179 #, fuzzy msgid "file name conversion problem -- name too long?" msgstr "檔案名稱太長" #: src/main/sysutils.c:180 #, fuzzy msgid "file name conversion problem" msgstr "檔案名稱太長" #: src/main/sysutils.c:246 msgid "invalid filename pattern" msgstr "檔案名稱式樣不正確" #: src/main/sysutils.c:250 #, fuzzy msgid "invalid file extension" msgstr "正規表示式不正確" #: src/main/sysutils.c:252 msgid "no 'pattern'" msgstr "沒有 'pattern'" #: src/main/sysutils.c:254 msgid "no 'tempdir'" msgstr "沒有 'tempdir'" #: src/main/sysutils.c:256 msgid "no 'fileext'" msgstr "" #: src/main/sysutils.c:348 src/main/sysutils.c:351 src/main/sysutils.c:442 #: src/main/sysutils.c:444 src/main/sysutils.c:480 msgid "wrong type for argument" msgstr "引數類型不正確" #: src/main/sysutils.c:446 #, fuzzy msgid "wrong length for argument" msgstr "'mode' 引數的長度不正確" #: src/main/sysutils.c:467 #, fuzzy msgid "'Sys.setenv' is not available on this system" msgstr "'putenv' 本系統沒有這個功能" #: src/main/sysutils.c:511 msgid "this system cannot unset environment variables: setting to \"\"" msgstr "" #: src/main/sysutils.c:522 #, fuzzy msgid "'Sys.unsetenv' is not available on this system" msgstr "'putenv' 本系統沒有這個功能" #: src/main/sysutils.c:587 msgid "'x' must be a character vector" msgstr "'x' 必須是字元向量" #: src/main/sysutils.c:613 #, fuzzy, c-format msgid "unsupported conversion from '%s' to '%s' in codepage %d" msgstr "不支援這種轉換" #: src/main/sysutils.c:685 src/main/sysutils.c:748 src/main/sysutils.c:847 #: src/main/sysutils.c:861 src/main/sysutils.c:936 #, fuzzy, c-format msgid "'%s' must be called on a CHARSXP" msgstr "csduplicated 不能用於 STRSXP" #: src/main/sysutils.c:751 src/main/sysutils.c:866 src/main/sysutils.c:939 msgid "translating strings with \"bytes\" encoding is not allowed" msgstr "" #: src/main/sysutils.c:965 #, fuzzy, c-format msgid "unsupported conversion to '%s' from codepage %d" msgstr "不支援這種轉換" #: src/main/sysutils.c:1378 msgid "cannot mkdir R_TempDir" msgstr "無法執行 mkdir R_TempDir" #: src/main/sysutils.c:1382 src/main/sysutils.c:1389 src/main/sysutils.c:1392 msgid "unable to set R_SESSION_TMPDIR" msgstr "" #: src/main/sysutils.c:1401 msgid "cannot allocate R_TempDir" msgstr "無法指派 R_TempDir" #: src/main/sysutils.c:1434 #, fuzzy msgid "temporary name too long" msgstr "檔案名稱太長" #: src/main/sysutils.c:1449 msgid "cannot find unused tempfile name" msgstr "暫時檔案名都用盡" #: src/main/sysutils.c:1452 #, fuzzy msgid "allocation failed in R_tmpnam2" msgstr "指派 GVText 失敗" #: src/main/sysutils.c:1478 msgid "proc.time() is not implemented on this system" msgstr "本系統沒有實作 proc.time() 此一功能" #: src/main/sysutils.c:1530 #, fuzzy msgid "setTimelimit() is not implemented on this system" msgstr "本系統沒有實作 gc.time()" #: src/main/sysutils.c:1558 #, fuzzy msgid "setSessionTimelimit() is not implemented on this system" msgstr "本系統沒有實作 gc.time()" #: src/main/sysutils.c:1596 #, fuzzy msgid "'dirmark = TRUE' is not supported on this platform" msgstr "本平台不支援 'recursive=TRUE'" #: src/main/unique.c:302 #, c-format msgid "length %d is too large for hashing" msgstr "用雜亂定址法時長度 %d 太長" #: src/main/unique.c:401 msgid "'duplicated' applies only to vectors" msgstr "'duplicated' 只適用於向量" #: src/main/unique.c:489 msgid "any_duplicated3(., <0-length incomp>)" msgstr "" #: src/main/unique.c:538 #, fuzzy msgid "'fromLast' must be length 1" msgstr "'which' 的長度必須為 1" #: src/main/unique.c:541 #, fuzzy msgid "'fromLast' must be TRUE or FALSE" msgstr "'increasing' 必須是 TRUE 或是 FALSE" #: src/main/unique.c:550 #, c-format msgid "%s() applies only to vectors" msgstr "%s() 只適用於向量" #: src/main/unique.c:778 msgid "'match' requires vector arguments" msgstr "'match' 需要向量引數" #: src/main/unique.c:825 src/main/unique.c:955 msgid "argument is not of mode character" msgstr "引數不是字元狀態" #: src/main/unique.c:1062 msgid "... used in a situation where it doesn't exist" msgstr "... 用在它不存在的地方了" #: src/main/unique.c:1153 msgid "unable to find a closure from within which 'match.call' was called" msgstr "" #: src/main/unique.c:1311 msgid "non-numeric matrix in rowsum(): this cannot happen" msgstr "rowsum() 中出現了非數值矩陣：這不應該發生" #: src/main/unique.c:1343 msgid "non-numeric data frame in rowsum" msgstr "rowsum 中不能有非數值資料框" #: src/main/unique.c:1375 msgid "this cannot happen" msgstr "這不可能發生" #: src/main/unique.c:1431 msgid "'names' must be a character vector" msgstr "'names' 必須是字元向量" #: src/main/unique.c:1435 msgid "'sep' must be a character string" msgstr "'sep' 必須是字串" #: src/main/unique.c:1507 msgid "csduplicated not called on a STRSXP" msgstr "csduplicated 不能用於 STRSXP" #: src/main/util.c:83 src/main/util.c:101 msgid "object is not a matrix" msgstr "目的物件不是矩陣" #: src/main/util.c:250 src/main/util.c:262 src/main/util.c:276 #, c-format msgid "type %d is unimplemented in '%s'" msgstr "'%2$s' 中尚未實作類型 %1$d" #: src/main/util.c:286 #, c-format msgid "unimplemented type '%s' in '%s'\n" msgstr "類型 '%s' 尚未在 '%s' 中實作\n" #: src/main/util.c:288 #, c-format msgid "unimplemented type (%d) in '%s'\n" msgstr "(%d) 類型尚未在 '%s' 中實作\n" #: src/main/util.c:413 msgid "invalid tag in name extraction" msgstr "抽取名稱的標記不正確" #: src/main/util.c:423 #, fuzzy, c-format msgid "%d argument passed to .Internal(%s) which requires %d" msgid_plural "%d arguments passed to .Internal(%s) which requires %d" msgstr[0] "傳給了 'atan' %d 個引數，但它只需要一個" #: src/main/util.c:429 #, fuzzy, c-format msgid "%d argument passed to '%s' which requires %d" msgid_plural "%d arguments passed to '%s' which requires %d" msgstr[0] "給了 'log'%d 個引數，但它最多只能用兩個引數" #: src/main/util.c:444 #, c-format msgid "supplied argument name '%s' does not match '%s'" msgstr "" #: src/main/util.c:454 #, fuzzy, c-format msgid "'nthcdr' list shorter than %d" msgstr "\"nthcdr\" 串列比 %d 要短" #: src/main/util.c:459 #, fuzzy msgid "'nthcdr' needs a list to CDR down" msgstr "\"nthcdr\" 需要 CDR 串列" #: src/main/util.c:579 msgid "'all.x' must be TRUE or FALSE" msgstr "'all.x' 必須是 TRUE 或 FALSE" #: src/main/util.c:581 msgid "'all.y' must be TRUE or FALSE" msgstr "'all.y' 必須是 TRUE 或 FALSE" #: src/main/util.c:693 #, fuzzy msgid "missing value is invalid" msgstr "參數中不能有缺值" #: src/main/util.c:702 src/main/util.c:709 msgid "cannot change working directory" msgstr "無法變更工作目錄" #: src/main/util.c:728 src/main/util.c:762 src/main/util.c:803 #: src/main/util.c:843 src/main/util.c:950 src/main/util.c:1000 #: src/main/util.c:1022 msgid "a character vector argument expected" msgstr "需要字元向量引數" #: src/main/util.c:735 src/main/util.c:770 src/main/util.c:811 #: src/main/util.c:851 msgid "path too long" msgstr "路徑太長" #: src/main/util.c:964 msgid "only the first character of 'quote' will be used" msgstr "只用了 'quote' 的第一個字元" #: src/main/util.c:1024 #, fuzzy msgid "a character vector 'value' expected" msgstr "需要字元向量引數" #: src/main/util.c:1027 #, fuzzy msgid "'value' must be of positive length" msgstr "引數的長度必須是正數" #: src/main/util.c:1155 src/main/util.c:1163 #, fuzzy, c-format msgid "invalid input '%s' in 'utf8towcs'" msgstr "Rmbstowcs 中的輸入無效" #: src/main/util.c:1248 #, fuzzy, c-format msgid "invalid multibyte string at '%s'" msgstr "多位元組字串 %d 不正確" #: src/main/util.c:1356 msgid "error message truncated to 255 chars" msgstr "錯誤訊息截短到 255 個位元組" #: src/main/util.c:1369 msgid "warning message truncated to 255 chars" msgstr "警告訊息截短到 255 個位元組" #: src/main/util.c:1824 #, fuzzy msgid "ICU is not supported on this build" msgstr "本平台不支援 nsl()" #: src/main/version.c:36 msgid "" "R is free software and comes with ABSOLUTELY NO WARRANTY.\n" "You are welcome to redistribute it under certain conditions.\n" "Type 'license()' or 'licence()' for distribution details.\n" "\n" msgstr "" "R 是免費軟體，不提供任何擔保。\n" "在某些條件下您可以將其自由散布。\n" "用 'license()' 或 'licence()' 來獲得散布的詳細條件。\n" "\n" #: src/main/version.c:39 msgid "" "R is a collaborative project with many contributors.\n" "Type 'contributors()' for more information and\n" "'citation()' on how to cite R or R packages in publications.\n" "\n" msgstr "" "R 是個合作計劃，有許多人為之做出了貢獻。\n" "用 'contributors()' 來看詳細的情況並且\n" "用 'citation()' 會告訴您如何在出版品中正確地參照 R 或 R 套件。\n" "\n" #: src/main/version.c:42 msgid "" "Type 'demo()' for some demos, 'help()' for on-line help, or\n" "'help.start()' for an HTML browser interface to help.\n" "Type 'q()' to quit R.\n" "\n" msgstr "" "用 'demo()' 來看一些示範程式，用 'help()' 來檢視線上輔助檔案，或\n" "用 'help.start()' 透過 HTML 瀏覽器來看輔助檔案。\n" "用 'q()' 離開 R。\n" "\n" #: src/main/vfonts.c:50 msgid "vfont routines cannot be accessed in module" msgstr "模組中沒有 vfont 例行程式" #: src/main/vfonts.c:67 src/main/vfonts.c:80 src/main/vfonts.c:98 msgid "Hershey fonts cannot be loaded" msgstr "無法載入 Hershey 字型" #: src/main/xspline.c:58 #, c-format msgid "add_point - reached MAXNUMPTS (%d)" msgstr "add_point - 已達到 MAXNUMPTS (%d)" #: src/main/xspline.c:72 msgid "insufficient memory to allocate point array" msgstr "配置點陣列時記憶體不足" #: src/main/xspline.c:470 msgid "There must be at least two control points" msgstr "至少必須有兩個控制點" #: src/main/xspline.c:472 msgid "There must be at least four control points" msgstr "至少必須有四個控制點" #: src/main/xspline.c:532 msgid "There must be at least three control points" msgstr "至少必須有三個控制點" #: src/modules/internet/internet.c:186 src/modules/internet/internet.c:190 #: src/modules/internet/internet.c:196 src/modules/internet/internet.c:208 msgid "allocation of url connection failed" msgstr "url 連結指派失敗" #: src/modules/internet/internet.c:285 msgid "only first element of 'url' argument used" msgstr "只用 'url' 引數的第一個元素" #: src/modules/internet/internet.c:291 msgid "only first element of 'destfile' argument used" msgstr "只用 'destfile' 引數的第一個元素" #: src/modules/internet/internet.c:316 msgid "Download progress" msgstr "正在下載" #: src/modules/internet/internet.c:338 #, fuzzy, c-format msgid "cannot open URL '%s', reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/modules/internet/internet.c:345 src/modules/internet/internet.c:371 #: src/modules/internet/internet.c:473 #, fuzzy, c-format msgid "cannot open destfile '%s', reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/modules/internet/internet.c:376 src/modules/internet/internet.c:478 #, c-format msgid "trying URL '%s'\n" msgstr "試開URL '%s'\n" #: src/modules/internet/internet.c:383 src/modules/internet/internet.c:485 msgid "opened URL\n" msgstr "開啟了 URL\n" #: src/modules/internet/internet.c:454 src/modules/internet/internet.c:559 #, c-format msgid "downloaded length %d != reported length %d" msgstr "下載的長度 %d != 報告的長度 %d" #: src/modules/internet/internet.c:459 src/modules/internet/internet.c:564 #, c-format msgid "cannot open URL '%s'" msgstr "無法開啟 URL '%s'" #: src/modules/internet/internet.c:592 src/modules/internet/internet.c:827 #, c-format msgid "cannot open: HTTP status was '%d %s'" msgstr "無法開啟: HTTP 狀態是 '%d%s'" #: src/modules/internet/internet.c:771 src/modules/internet/internet.c:934 msgid "InternetOpenUrl timed out" msgstr "InternetOpenUrl 已經逾時" #: src/modules/internet/internet.c:798 src/modules/internet/internet.c:812 #: src/modules/internet/internet.c:956 src/modules/internet/internet.c:965 #, c-format msgid "InternetOpenUrl failed: '%s'" msgstr "InternetOpenUrl 失敗: '%s'" #: src/modules/internet/internet.c:869 msgid "Internet read timed out" msgstr "網際網路讀取逾時" #: src/modules/internet/nanoftp.c:288 src/modules/internet/nanoftp.c:301 #: src/modules/internet/nanoftp.c:312 src/modules/internet/nanoftp.c:346 #: src/modules/internet/nanoftp.c:356 msgid "RxmlNanoFTPScanURL: overlong (invalid?) URL" msgstr "" #: src/modules/internet/nanoftp.c:389 msgid "removing FTP proxy info" msgstr "刪除 FTP 代理主機資訊" #: src/modules/internet/nanoftp.c:391 #, c-format msgid "using FTP proxy '%s'" msgstr "用 FTP 代理主機 '%s'" #: src/modules/internet/nanoftp.c:402 src/modules/internet/nanoftp.c:431 msgid "RxmlNanoFTPScanProxy: overlong (invalid?) URL" msgstr "" #: src/modules/internet/nanoftp.c:830 msgid "cannot resolve host" msgstr "無法分辨主機" #: src/modules/internet/nanoftp.c:860 msgid "failed to connect to server" msgstr "連線不上伺服器" #: src/modules/internet/nanoftp.c:871 msgid "failed to get response from server" msgstr "伺服器沒有反應" #: src/modules/internet/nanoftp.c:1134 msgid "RxmlNanoFTPGetConnection: failed to create socket" msgstr "RxmlNanoFTPGetConnection: 建立插槽失敗" #: src/modules/internet/nanoftp.c:1180 msgid "failed to create a data connection" msgstr "建立資料連結失敗" #: src/modules/internet/nanoftp.c:1188 msgid "failed to bind a port" msgstr "連線通訊埠失敗" #: src/modules/internet/nanoftp.c:1195 #, c-format msgid "could not listen on port %d" msgstr "無法從通訊埠 %d 聽取資料" #: src/modules/internet/nanohttp.c:362 src/modules/internet/nanohttp.c:390 #: src/modules/internet/nanohttp.c:399 msgid "RxmlNanoHTTPScanURL: overlong (invalid?) URL" msgstr "" #: src/modules/internet/nanohttp.c:433 msgid "removing HTTP proxy info" msgstr "刪除 HTTP 代理主機資訊" #: src/modules/internet/nanohttp.c:435 #, c-format msgid "using HTTP proxy '%s'" msgstr "用 HTTP 代理主機 '%s'" #: src/modules/internet/nanohttp.c:446 src/modules/internet/nanohttp.c:482 msgid "RxmlNanoHTTPScanProxy: overlong (invalid?) URL" msgstr "" #: src/modules/internet/nanohttp.c:1095 #, fuzzy, c-format msgid "unable to resolve '%s'" msgstr "無法分辨 '%s'。" #: src/modules/internet/nanohttp.c:1122 #, c-format msgid "connected to '%s' on port %d." msgstr "透過通訊埠 %2$d 接通到 '%1$s'。" #: src/modules/internet/nanohttp.c:1127 #, c-format msgid "unable to connect to '%s' on port %d." msgstr "無法透過通訊埠 %2$d 連線到 '%1$s'。" #: src/modules/internet/nanohttp.c:1430 #, c-format msgid "redirect to: '%s'" msgstr "重新傳送到: '%s'" #: src/modules/internet/nanohttp.c:1440 msgid "too many redirects, aborting ..." msgstr "太多重新傳送，中斷工作 ..." #: src/modules/internet/sockconn.c:176 src/modules/internet/sockconn.c:180 #: src/modules/internet/sockconn.c:186 src/modules/internet/sockconn.c:199 msgid "allocation of socket connection failed" msgstr "指派插槽連結失敗" #: src/modules/lapack/Lapack.c:45 src/modules/lapack/Lapack.c:64 #, fuzzy, c-format msgid "argument type[1]='%s' must be a character string of string length 1" msgstr "引數必須是長度為 1 的字元向量" #: src/modules/lapack/Lapack.c:53 #, c-format msgid "argument type[1]='%s' must be one of 'M','1','O','I','F' or 'E'" msgstr "" #: src/modules/lapack/Lapack.c:70 #, c-format msgid "argument type[1]='%s' must be one of '1','O', or 'I'" msgstr "" #: src/modules/lapack/Lapack.c:84 src/modules/lapack/Lapack.c:705 msgid "'jobu' and 'jobv' must be character strings" msgstr "'jobu' 和 'jobv' 必須是字元目的物件" #: src/modules/lapack/Lapack.c:86 msgid "'method' must be a character string" msgstr "'method' 必須是字串" #: src/modules/lapack/Lapack.c:106 src/modules/lapack/Lapack.c:115 #: src/modules/lapack/Lapack.c:170 src/modules/lapack/Lapack.c:181 #: src/modules/lapack/Lapack.c:256 src/modules/lapack/Lapack.c:262 #: src/modules/lapack/Lapack.c:585 src/modules/lapack/Lapack.c:591 #: src/modules/lapack/Lapack.c:635 src/modules/lapack/Lapack.c:642 #: src/modules/lapack/Lapack.c:646 src/modules/lapack/Lapack.c:680 #: src/modules/lapack/Lapack.c:687 src/modules/lapack/Lapack.c:718 #: src/modules/lapack/Lapack.c:727 src/modules/lapack/Lapack.c:773 #: src/modules/lapack/Lapack.c:779 src/modules/lapack/Lapack.c:834 #: src/modules/lapack/Lapack.c:840 src/modules/lapack/Lapack.c:1006 #: src/modules/lapack/Lapack.c:1012 src/modules/lapack/Lapack.c:1051 #: src/modules/lapack/Lapack.c:1058 src/modules/lapack/Lapack.c:1062 #: src/modules/lapack/Lapack.c:1091 src/modules/lapack/Lapack.c:1098 #: src/modules/lapack/Lapack.c:1123 #, c-format msgid "error code %d from Lapack routine '%s'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:149 src/modules/lapack/Lapack.c:235 #: src/modules/lapack/Lapack.c:760 src/modules/lapack/Lapack.c:813 msgid "'x' must be a square numeric matrix" msgstr "'x' 必須是正方形的數值矩陣" #: src/modules/lapack/Lapack.c:311 #, fuzzy msgid "'type' must be a character string" msgstr "'title' 必須為字串" #: src/modules/lapack/Lapack.c:318 src/modules/lapack/Lapack.c:352 #: src/modules/lapack/Lapack.c:409 #, fuzzy msgid "'A' must be a numeric matrix" msgstr "'a' 必須是數值矩陣" #: src/modules/lapack/Lapack.c:345 src/modules/lapack/Lapack.c:401 #: src/modules/lapack/Lapack.c:443 src/modules/lapack/Lapack.c:492 #, fuzzy msgid "'norm' must be a character string" msgstr "'msg1' 必須是字串" #: src/modules/lapack/Lapack.c:373 #, fuzzy, c-format msgid "error [%d] from Lapack 'dgetrf()'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:378 #, c-format msgid "exact singularity: U[%d,%d] = 0 in LU-decomposition {Lapack 'dgetrf()'}" msgstr "" #: src/modules/lapack/Lapack.c:390 #, fuzzy, c-format msgid "error [%d] from Lapack 'dgecon()'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:415 src/modules/lapack/Lapack.c:449 #: src/modules/lapack/Lapack.c:498 #, fuzzy msgid "'A' must be a *square* matrix" msgstr "'a' 必須是正方形矩陣" #: src/modules/lapack/Lapack.c:429 #, fuzzy, c-format msgid "error [%d] from Lapack 'dtrcon()'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:445 src/modules/lapack/Lapack.c:494 #, fuzzy msgid "'A' must be a complex matrix" msgstr "'a' 必須是複數矩陣" #: src/modules/lapack/Lapack.c:467 #, fuzzy, c-format msgid "error [%d] from Lapack 'zgetrf()'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:475 #, fuzzy, c-format msgid "error [%d] from Lapack 'zgecon()'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:479 src/modules/lapack/Lapack.c:513 #: src/modules/lapack/Lapack.c:557 src/modules/lapack/Lapack.c:607 #: src/modules/lapack/Lapack.c:650 src/modules/lapack/Lapack.c:691 #: src/modules/lapack/Lapack.c:740 src/modules/lapack/Lapack.c:796 #: src/modules/lapack/Lapack.c:857 msgid "Fortran complex functions are not available on this platform" msgstr "本平台不能使用 Fortran 複數功能" #: src/modules/lapack/Lapack.c:510 #, fuzzy, c-format msgid "error [%d] from Lapack 'ztrcon()'" msgstr "錯誤程式碼 %d，Lapack 例行程式 '%s'" #: src/modules/lapack/Lapack.c:528 src/modules/lapack/Lapack.c:571 msgid "'a' must be a complex matrix" msgstr "'a' 必須是複數矩陣" #: src/modules/lapack/Lapack.c:530 src/modules/lapack/Lapack.c:621 #: src/modules/lapack/Lapack.c:664 msgid "'b' must be a complex matrix" msgstr "'b' 必須是複數矩陣" #: src/modules/lapack/Lapack.c:535 src/modules/lapack/Lapack.c:957 msgid "'a' is 0-diml" msgstr "'a' 是 0-diml" #: src/modules/lapack/Lapack.c:537 src/modules/lapack/Lapack.c:959 msgid "no right-hand side in 'b'" msgstr "'b' 在等號右側沒有公式" #: src/modules/lapack/Lapack.c:539 src/modules/lapack/Lapack.c:961 #, c-format msgid "'a' (%d x %d) must be square" msgstr "'a' (%d x %d) 必須是正方形的" #: src/modules/lapack/Lapack.c:541 src/modules/lapack/Lapack.c:963 #, c-format msgid "'b' (%d x %d) must be compatible with 'a' (%d x %d)" msgstr "'b' (%d x %d) 必須與 'a' (%d x %d) 相容" #: src/modules/lapack/Lapack.c:550 src/modules/lapack/Lapack.c:887 #: src/modules/lapack/Lapack.c:929 src/modules/lapack/Lapack.c:972 #, c-format msgid "argument %d of Lapack routine %s had invalid value" msgstr "Lapack 例行程式 %2$s 的引數 %1$d 具有不正確的值" #: src/modules/lapack/Lapack.c:628 src/modules/lapack/Lapack.c:673 #: src/modules/lapack/Lapack.c:1044 src/modules/lapack/Lapack.c:1084 #, c-format msgid "right-hand side should have %d not %d rows" msgstr "公式右側應該有 %d 而不是 %d 列" #: src/modules/lapack/Lapack.c:874 src/modules/lapack/Lapack.c:1118 msgid "'a' must be a square matrix" msgstr "'a' 必須是正方形矩陣" #: src/modules/lapack/Lapack.c:875 msgid "'a' must have dims > 0" msgstr "'a' 必須有 dims > 0" #: src/modules/lapack/Lapack.c:885 #, c-format msgid "the leading minor of order %d is not positive definite" msgstr "序列 %d 前置的次要符號並非肯定明確" #: src/modules/lapack/Lapack.c:893 src/modules/lapack/Lapack.c:914 #: src/modules/lapack/Lapack.c:950 src/modules/lapack/Lapack.c:993 #: src/modules/lapack/Lapack.c:1111 msgid "'a' must be a numeric matrix" msgstr "'a' 必須是數值矩陣" #: src/modules/lapack/Lapack.c:901 msgid "'size' argument must be a positive integer" msgstr "'size' 引數必須是正整數" #: src/modules/lapack/Lapack.c:916 #, c-format msgid "'size' cannot exceed ncol(x) = %d" msgstr "'size' 不能超過 ncol(x)=%d" #: src/modules/lapack/Lapack.c:917 #, c-format msgid "'size' cannot exceed nrow(x) = %d" msgstr "'size' 不能超過 nrow(x)=%d" #: src/modules/lapack/Lapack.c:927 #, c-format msgid "element (%d, %d) is zero, so the inverse cannot be computed" msgstr "元素 (%d,%d) 為零，因此無法逆向求值" #: src/modules/lapack/Lapack.c:952 src/modules/lapack/Lapack.c:1037 #: src/modules/lapack/Lapack.c:1075 msgid "'b' must be a numeric matrix" msgstr "'b' 必須是數值矩陣" #: src/modules/lapack/Lapack.c:975 msgid "Lapack routine dgesv: system is exactly singular" msgstr "Lapack 例行程式 dgesv: 系統正好是獨特的" #: src/modules/lapack/Lapack.c:980 #, c-format msgid "system is computationally singular: reciprocal condition number = %g" msgstr "系統計算上是獨特的: 互反條件數=%g" #: src/modules/lapack/Lapack.c:1113 msgid "argument 'logarithm' must be logical" msgstr "引數 'logarithm' 必須是邏輯值" #: src/modules/X11/devX11.c:296 msgid "cannot set grayscale: reverting to monochrome" msgstr "無法設定灰階: 轉用黑白顏色" #: src/modules/X11/devX11.c:379 msgid "" "X11 driver unable to obtain color cube\n" " reverting to monochrome" msgstr "X11 驅動程式無法開啟顏色方塊，轉用黑白顏色" #: src/modules/X11/devX11.c:424 msgid "" "Error: X11 cannot allocate additional graphics colors.\n" "Consider using X11 with colortype=\"pseudo.cube\" or \"gray\"." msgstr "" "錯誤：X11 無法指派額外的圖案顏色。\n" "請考慮用 colortype=\"pseudo.cube\" 或 \"gray\" 選項來呼叫 X11。" #: src/modules/X11/devX11.c:858 msgid "" "could not find any X11 fonts\n" "Check that the Font Path is correct." msgstr "" "找不到任何 X11 字型\n" "請檢查字型路徑設得是不是對。" #: src/modules/X11/devX11.c:918 #, c-format msgid "X11 used font size %d when %d was requested" msgstr "X11 用字型大小 %d 但需要的是 %d" #: src/modules/X11/devX11.c:952 #, fuzzy, c-format msgid "X11 font %s, face %d at size %d could not be loaded" msgstr "無法載入 X11 字型大小 %d" #: src/modules/X11/devX11.c:961 msgid "" "semi-transparency is not supported on this device: reported only once per " "page" msgstr "" #: src/modules/X11/devX11.c:1071 #, c-format msgid "X11 protocol error: %s" msgstr "X11 協定錯誤：%s" #: src/modules/X11/devX11.c:1079 #, c-format msgid "X11 I/O error while opening X11 connection to '%s'" msgstr "" #: src/modules/X11/devX11.c:1097 msgid "X11 fatal IO error: please save work and shut down R" msgstr "X11 致命的 IO 錯誤: 請儲存工作資料，然後重新啟動 R" #: src/modules/X11/devX11.c:1153 msgid "locale not supported by Xlib: some X ops will operate in C locale" msgstr "Xlib 不支援語言環境: 某些 X 作業指令將在 C 語言環境中啟動" #: src/modules/X11/devX11.c:1154 msgid "X cannot set locale modifiers" msgstr "X 無法設定語言環境修飾器" #: src/modules/X11/devX11.c:1158 msgid "no png support in this version of R" msgstr "本 R 版本不支援 png" #: src/modules/X11/devX11.c:1164 msgid "filename too long in png() call" msgstr "png() 呼叫時檔案名稱太長" #: src/modules/X11/devX11.c:1168 #, c-format msgid "could not open PNG file '%s'" msgstr "無法開啟 PNG 檔案 '%s'" #: src/modules/X11/devX11.c:1180 msgid "no jpeg support in this version of R" msgstr "本 R 版本不支援 jpeg" #: src/modules/X11/devX11.c:1190 msgid "filename too long in jpeg() call" msgstr "jpeg() 呼叫時檔案名稱太長" #: src/modules/X11/devX11.c:1194 #, c-format msgid "could not open JPEG file '%s'" msgstr "無法開啟 JPEG 檔案 '%s'" #: src/modules/X11/devX11.c:1206 #, fuzzy msgid "no tiff support in this version of R" msgstr "本 R 版本不支援 png" #: src/modules/X11/devX11.c:1214 #, fuzzy msgid "filename too long in tiff() call" msgstr "png() 呼叫時檔案名稱太長" #: src/modules/X11/devX11.c:1226 #, fuzzy msgid "filename too long in bmp() call" msgstr "png() 呼叫時檔案名稱太長" #: src/modules/X11/devX11.c:1230 #, fuzzy, c-format msgid "could not open BMP file '%s'" msgstr "無法開啟 PNG 檔案 '%s'" #: src/modules/X11/devX11.c:1260 #, c-format msgid "unable to open connection to X11 display '%s'" msgstr "無法開啟連結到 X11 顯示 '%s'" #: src/modules/X11/devX11.c:1270 msgid "ignoring 'display' argument as an X11 device is already open" msgstr "" #: src/modules/X11/devX11.c:1281 msgid "jpeg() does not support transparency: using white bg" msgstr "jpeg() 不支援透明繪圖: 用白色的背景" #: src/modules/X11/devX11.c:1386 #, fuzzy, c-format msgid "unable to obtain information on display '%s'" msgstr "無法開啟連結到 X11 顯示 '%s'" #: src/modules/X11/devX11.c:1404 msgid "unable to create X11 window" msgstr "無法建立 X11 視窗" #: src/modules/X11/devX11.c:1500 #, c-format msgid "'width=%d, height=%d' are unlikely values in pixels" msgstr "'寬度=%d, 高度=%d' 是不太可能的像素值" #: src/modules/X11/devX11.c:1505 msgid "unable to create pixmap" msgstr "無法建立像素圖" #: src/modules/X11/devX11.c:1576 msgid "font family not found in X11 font database" msgstr "X11 字型資料庫中沒有此一字型家族" #: src/modules/X11/devX11.c:1615 #, fuzzy, c-format msgid "invalid use of %d < 0 in '%s'" msgstr "'n' 的值不正確" #: src/modules/X11/devX11.c:1736 src/modules/X11/devX11.c:3058 #, fuzzy, c-format msgid "could not open file '%s'" msgstr "無法開啟 PNG 檔案 '%s'" #: src/modules/X11/devX11.c:1975 #, fuzzy, c-format msgid "%s not available for this device" msgstr "此連結不能被截短" #: src/modules/X11/devX11.c:2057 #, fuzzy msgid "Unable to create XImage" msgstr "無法建立像素圖" #: src/modules/X11/devX11.c:2455 #, fuzzy msgid "type=\"cairo\" is not supported on this build -- using \"Xlib\"" msgstr "本平台不支援 nsl()" #: src/modules/X11/devX11.c:2766 msgid "invalid string argument" msgstr "字串引數不正確" #: src/modules/X11/devX11.c:2792 #, c-format msgid "unable to start device %s" msgstr "無法開啟裝置 %s" #: src/modules/X11/devX11.c:2817 msgid "invalid 'width' or 'height'" msgstr "'width' 或 'height' 不正確" #: src/modules/X11/devX11.c:2824 msgid "invalid colortype passed to X11 driver" msgstr "傳給 X11 驅動器的顏色類型不正確" #: src/modules/X11/devX11.c:2838 msgid "unknown X11 color/colour model -- using monochrome" msgstr "沒有這種 X11 顏色/顏色模型 -- 使用黑白顏色" #: src/modules/X11/devX11.c:2923 #, fuzzy msgid "no plot on device to save" msgstr "沒有可以儲存的歷史紀錄" #: src/modules/X11/devX11.c:2925 #, fuzzy msgid "not an open X11cairo device" msgstr "太多已經開啟的裝置" #: src/modules/X11/devX11.c:2935 #, c-format msgid "cannot open file '%s'" msgstr "無法開啟檔案 '%s'" #: src/modules/X11/devX11.c:2952 #, fuzzy msgid "savePlot() is not supported on this build" msgstr "本平台不支援 nsl()" #: src/modules/X11/devX11.c:2989 src/modules/X11/devX11.c:3151 #, fuzzy msgid "unimplemented cairo-based device" msgstr "尚未實作 predicate" #: src/modules/X11/devX11.c:3361 #, fuzzy, c-format msgid "unable to start device '%s'" msgstr "無法開啟裝置 %s" #: src/modules/X11/devX11.c:3373 #, fuzzy msgid "cairo-based devices are not supported on this build" msgstr "本平台不支援 nsl()" #: src/modules/X11/devX11.c:3412 msgid "unable to contact X11 display" msgstr "無法連結到 X11 顯示" #: src/modules/X11/devX11.c:3461 #, fuzzy, c-format msgid "clipboard cannot be read (error code %d)" msgstr "打不開剪貼簿，或是剪貼簿不含文字" #: src/modules/X11/devX11.c:3495 msgid "cannot allocate memory for X11Routines structure" msgstr "無法為 X11Routines 結構指派記憶體" #: src/nmath/bessel_i.c:67 msgid "bessel_i allocation error" msgstr "bessel_i 指派錯誤" #: src/nmath/bessel_i.c:75 src/nmath/bessel_i.c:120 #, c-format msgid "bessel_i(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_i(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n" #: src/nmath/bessel_i.c:78 src/nmath/bessel_i.c:123 #, c-format msgid "bessel_i(%g,nu=%g): precision lost in result\n" msgstr "bessel_i(%g,nu=%g): 結果的精確度有損害\n" #: src/nmath/bessel_j.c:65 msgid "bessel_j allocation error" msgstr "bessel_j 指派錯誤" #: src/nmath/bessel_j.c:73 src/nmath/bessel_j.c:116 #, c-format msgid "bessel_j(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_j(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n" #: src/nmath/bessel_j.c:76 src/nmath/bessel_j.c:119 #, c-format msgid "bessel_j(%g,nu=%g): precision lost in result\n" msgstr "bessel_j(%g,nu=%g): 結果的精確度有損害\n" #: src/nmath/bessel_k.c:60 msgid "bessel_k allocation error" msgstr "bessel_k 指派錯誤" #: src/nmath/bessel_k.c:68 src/nmath/bessel_k.c:105 #, c-format msgid "bessel_k(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_k(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n" #: src/nmath/bessel_k.c:71 src/nmath/bessel_k.c:108 #, c-format msgid "bessel_k(%g,nu=%g): precision lost in result\n" msgstr "bessel_k(%g,nu=%g): 結果的精確度有損害\n" #: src/nmath/bessel_y.c:64 msgid "bessel_y allocation error" msgstr "bessel_y 指派錯誤" #: src/nmath/bessel_y.c:74 src/nmath/bessel_y.c:119 #, c-format msgid "bessel_y(%g): ncalc (=%ld) != nb (=%ld); alpha=%g. Arg. out of range?\n" msgstr "bessel_y(%g): ncalc (=%ld)!= nb (=%ld); alpha=%g. 引數在範圍外?\n" #: src/nmath/bessel_y.c:77 src/nmath/bessel_y.c:122 #, c-format msgid "bessel_y(%g,nu=%g): precision lost in result\n" msgstr "bessel_y(%g,nu=%g): 結果的精確度有損害\n" #: src/nmath/nmath.h:132 #, fuzzy, c-format msgid "argument out of domain in '%s'\n" msgstr "'perm' 的值在範圍外" #: src/nmath/nmath.h:135 #, fuzzy, c-format msgid "value out of range in '%s'\n" msgstr "'perm' 的值在範圍外" #: src/nmath/nmath.h:138 #, fuzzy, c-format msgid "convergence failed in '%s'\n" msgstr "開啟 %s 失敗" #: src/nmath/nmath.h:141 #, c-format msgid "full precision may not have been achieved in '%s'\n" msgstr "" #: src/nmath/nmath.h:144 #, c-format msgid "underflow occurred in '%s'\n" msgstr "" #: src/nmath/pnchisq.c:233 #, c-format msgid "pnchisq(x=%g, ..): not converged in %d iter." msgstr "pnchisq(x=%g, ..): %d 次循環後還沒有聚合。" #: src/nmath/polygamma.c:499 #, c-format msgid "deriv = %d > %d (= n_max)\n" msgstr "deriv = %d > %d (= n_max)\n" #: src/nmath/rmultinom.c:78 #, c-format msgid "rbinom: probability sum should be 1, but is %g" msgstr "rbinom: 機率和應該為 1，而不是 %g" #: src/nmath/signrank.c:77 msgid "signrank allocation error" msgstr "signrank 指派錯誤" #: src/nmath/snorm.c:326 #, c-format msgid "norm_rand(): invalid N01_kind: %d\n" msgstr "norm_rand(): N01_kind: %d 不正確\n" #: src/nmath/wilcox.c:85 src/nmath/wilcox.c:95 src/nmath/wilcox.c:148 #: src/nmath/wilcox.c:310 #, c-format msgid "wilcox allocation error %d" msgstr "wilcox 指派錯誤 %d" #: src/unix/dynload.c:143 msgid "" "Explicit local dynamic loading not supported on this platform. Using default." msgstr "本系統不支援明確的本地動態載入。使用預設值。" #: src/unix/dynload.c:144 msgid "" "Explicit global dynamic loading not supported on this platform. Using " "default." msgstr "本系統不支援明確的全局動態載入。使用預設值。" #: src/unix/dynload.c:145 msgid "" "Explicit non-lazy dynamic loading not supported on this platform. Using " "default." msgstr "本系統不支援明確的非緩慢動態載入。使用預設值。" #: src/unix/dynload.c:146 msgid "" "Explicit lazy dynamic loading not supported on this platform. Using default." msgstr "本系統不支援明確的緩慢動態載入。使用預設值。" #: src/unix/dynload.c:240 msgid "cannot get working directory!" msgstr "找不到工作目錄" #: src/unix/edit.c:111 msgid "invalid argument to edit()" msgstr "edit() 引數不正確" #: src/unix/edit.c:142 msgid "argument 'editor' type not valid" msgstr "引數 'editor' 的類型不正確" #: src/unix/edit.c:144 msgid "argument 'editor' is not set" msgstr "引數 'editor' 還沒有被設定" #: src/unix/edit.c:149 msgid "'title' must be a string" msgstr "'title' 必須是字串" #: src/unix/edit.c:167 #, c-format msgid "unable to run editor '%s'" msgstr "無法啟動編輯器 '%s'" #: src/unix/edit.c:169 msgid "editor ran but returned error status" msgstr "啟動了編輯器但回傳錯誤狀態" #: src/unix/edit.c:179 #, c-format msgid "problem with running editor %s" msgstr "啟動編輯器 %s 時出了問題" #: src/unix/edit.c:192 msgid "unable to open file to read" msgstr "無法開啟檔案來讀取資料" #: src/unix/edit.c:200 #, fuzzy, c-format msgid "" "%s occurred on line %d\n" " use a command like\n" " x <- edit()\n" " to recover" msgstr "第 %d 列發生錯誤，請用類似於 x <- edit() 的指令來回到原來狀態" #: src/unix/sys-std.c:128 msgid "interrupt handler must not return" msgstr "插斷處置程式不能有回傳值" #: src/unix/sys-std.c:514 msgid "" "An unusual circumstance has arisen in the nesting of readline input. Please " "report using bug.report()" msgstr "巢狀 readline 輸入出了不尋常的錯，請用 bug.report()" #: src/unix/sys-std.c:1068 src/unix/sys-std.c:1235 #, fuzzy, c-format msgid "problem in saving the history file '%s'" msgstr "啟動編輯器 %s 時出了問題" #: src/unix/sys-std.c:1142 #, fuzzy, c-format msgid "" "Cannot open file '%s': %s\n" "\n" msgstr "" "無法開啟檔案 '%s'\n" "\n" #: src/unix/sys-std.c:1206 src/unix/sys-std.c:1229 msgid "'file' argument is too long" msgstr "'file' 引數太長" #: src/unix/sys-std.c:1212 src/unix/sys-std.c:1214 msgid "no history mechanism available" msgstr "沒有歷史功能" #: src/unix/sys-std.c:1241 #, fuzzy msgid "problem in truncating the history file" msgstr "啟動編輯器 %s 時出了問題" #: src/unix/sys-std.c:1243 src/unix/sys-std.c:1245 msgid "no history available to save" msgstr "沒有可以儲存的歷史紀錄" #: src/unix/sys-std.c:1351 msgid "Sys.sleep is not implemented on this system" msgstr "本系統沒有實作 Sys.sleep 此一功能" #: src/unix/sys-unix.c:265 msgid "non-empty character argument expected" msgstr "需要非空字元引數" #: src/unix/sys-unix.c:268 msgid "'intern' must be logical and not NA" msgstr "'intern' 必須是邏輯值且非無定義" #: src/unix/sys-unix.c:280 #, fuzzy, c-format msgid "cannot popen '%s', probable reason '%s'" msgstr "無法開啟檔案 '%s'，原因是 '%s'" #: src/unix/sys-unix.c:285 #, c-format msgid "line %d may be truncated in call to system(, intern = TRUE)" msgstr "" #: src/unix/sys-unix.c:302 #, fuzzy, c-format msgid "error in running command: '%s'" msgstr "unz 程式碼中有內部錯誤" #: src/unix/sys-unix.c:304 #, fuzzy msgid "error in running command" msgstr "unz 程式碼中有內部錯誤" #: src/unix/sys-unix.c:308 #, c-format msgid "running command '%s' had status %d and error message '%s'" msgstr "" #: src/unix/sys-unix.c:394 msgid "Sys.info() is not implemented on this system" msgstr "本系統沒有實作 Sys.info() 此一功能" #: src/unix/system.c:250 #, c-format msgid "WARNING: --gui or -g without value ignored" msgstr "警告: --gui 或 -g 選項沒有值，因此忽略不用" #: src/unix/system.c:272 #, c-format msgid "WARNING: unknown gui '%s', using X11\n" msgstr "警告: 沒有這種 gui '%s', 使用 X11\n" #: src/unix/system.c:275 #, c-format msgid "WARNING: unknown gui '%s', using none\n" msgstr "警告: 沒有這種 gui '%s', 因此什麼都不用\n" #: src/unix/system.c:369 #, fuzzy msgid "creating temporary file for '-e' failed" msgstr "程式概要分析計時器設置失敗" #: src/unix/system.c:450 msgid "WARNING: Only editing the first in the list of files" msgstr "警告: 只修改檔案串列中的第一個元素" #: src/unix/X11.c:52 msgid "X11 module is not available under this GUI" msgstr "本 GUI 中沒有 X11 模組" #: src/unix/X11.c:58 msgid "X11 routines cannot be accessed in module" msgstr "模組中沒有此一 X11 例行程式" #: src/unix/X11.c:75 src/unix/X11.c:86 src/unix/X11.c:97 src/unix/X11.c:116 #: src/unix/X11.c:127 src/unix/X11.c:138 src/unix/X11.c:149 msgid "X11 module cannot be loaded" msgstr "無法載入 X11 模組" #: src/unix/X11.c:162 src/unix/X11.c:168 src/unix/X11.c:174 src/unix/X11.c:181 #: src/unix/X11.c:188 src/unix/X11.c:194 src/unix/X11.c:200 msgid "X11 is not available" msgstr "無法使用 X11" #, fuzzy #~ msgid "constand buffer must be a generic vector" #~ msgstr "程式碼必須是一般向量" #, fuzzy #~ msgid "invalid '%s' arguemnt" #~ msgstr "'%s' 引數不正確" #~ msgid "invalid 'tempdir' in R_tmpnam" #~ msgstr "R_tmpnam 中的 'tempdir' 無效" #~ msgid "this platform does not support 'split=TRUE'" #~ msgstr "本平臺不支援 'split=TRUE'" #~ msgid "error: system commands are not supported in this version of R.\n" #~ msgstr "錯誤: 此 R 版本不支援系統命令。\n" #~ msgid "'source' must be a single string" #~ msgstr "'source' 必須是單一字串" #~ msgid "'destination' must be a single string" #~ msgstr "'destination' 必須是單一字串" #, fuzzy #~ msgid "missing values are not allowed" #~ msgstr "需要邏輯值的地方有缺值" #~ msgid "expanded destination name too long" #~ msgstr "擴充的 destination 名太長" #~ msgid "not a SPECIAL function" #~ msgstr "非 SPECIAL 函數" #~ msgid "'destination' does not exist" #~ msgstr "'destination' 不存在" #, fuzzy #~ msgid "'%s' must be an environment" #~ msgstr "'enclos' 必須是環境物件" #, fuzzy #~ msgid "invalid '%s' argument: must be NULL or environment" #~ msgstr "'env' 引數必須是環境物件" #~ msgid "missing value where logical needed" #~ msgstr "需要邏輯值的地方有缺值" #~ msgid "argument of if(*) is not interpretable as logical" #~ msgstr "if(*) 的引數不能做為邏輯值解譯" #~ msgid "file.access() is not implemented on this system" #~ msgstr "本系統沒有實作 file.access()" #, fuzzy #~ msgid "names(x) must be valid character(length(x))." #~ msgstr "'names' 必須是字元向量" #~ msgid "Insufficient memory (expandcmd)" #~ msgstr "沒有足夠的記憶體 (expandcmd)" #~ msgid "A \" is missing (expandcmd)" #~ msgstr "少了一個 \" (expandcmd)" #~ msgid " not found" #~ msgstr "沒找到" #~ msgid "Impossible to run " #~ msgstr "無法執行 " #~ msgid "Impossible to redirect input" #~ msgstr "無法將輸入重新導向" #~ msgid "Impossible to create pipe" #~ msgstr "無法建立管道" #~ msgid "Impossible to create thread/pipe" #~ msgstr "無法建立執行緒/管道" #~ msgid "pipe connections are not available on this system" #~ msgstr "本系統沒有管道連結這個功能" #~ msgid "'intern=TRUE' is not implemented on this platform" #~ msgstr "本平臺沒有實作 'intern=TRUE' 此一功能" #~ msgid "'onMouseDown' not supported" #~ msgstr "不支援 'onMouseDown'" #~ msgid "invalid 'onMouseDown' callback" #~ msgstr "'onMouseDown' 回呼發生錯誤" #~ msgid "'onMouseMove' not supported" #~ msgstr "不支援' onMouseMove'" #~ msgid "invalid 'onMouseMove' callback" #~ msgstr "'onMouseMove' 回呼發生錯誤" #~ msgid "'onMouseUp' not supported" #~ msgstr "不支援 'onMouseUp'" #~ msgid "invalid 'onMouseUp' callback" #~ msgstr "'onMouseUp' 回呼不正確" #~ msgid "'onKeybd' not supported" #~ msgstr "不支援 'onKeybd'" #~ msgid "invalid 'onKeybd' callback" #~ msgstr "'onKeybd' 回呼不正確" #~ msgid "directory/folder path name too long" #~ msgstr "目錄/資料夾路徑太長" #~ msgid "list.files: '%s' is not a readable directory" #~ msgstr "list.files: '%s' 目錄不可讀" #~ msgid "%d arguments passed to 'atan' which requires 1" #~ msgstr "傳給了 'atan' %d 個引數，但它只需要一個" #~ msgid "invalid parameter in 'switch()'" #~ msgstr "'switch()' 的參數不正確" #, fuzzy #~ msgid "unrecognized escape removed from \"%s\"" #~ msgid_plural "unrecognized escapes removed from \"%s\"" #~ msgstr[0] "沒有這種 'save' 值" #, fuzzy #~ msgid "duplicate '%s' argument" #~ msgstr "引數不正確" #~ msgid "corrupt internals!" #~ msgstr "內部毀壞!" #~ msgid "arguments after the first two are ignored" #~ msgstr "除了第一第二引數其它忽略不用" #~ msgid "'...' not allowed in return" #~ msgstr "'...' 不允許存於回傳值中" #~ msgid "empty expression in return value" #~ msgstr "回傳值中的運算式是空的" #, fuzzy #~ msgid "%s not yet implemented for this device" #~ msgstr "本系統沒有實作 gc.time()" #, fuzzy #~ msgid "'xzfile' is not supported in this build of R" #~ msgstr "本平台不支援 nsl()" #~ msgid "internal error in R_compress1" #~ msgstr "內部錯誤 R_compress1" #~ msgid "internal error in R_decompress1" #~ msgstr "內部錯誤 R_decompress1" #, fuzzy #~ msgid "'size' must be a positive integer" #~ msgstr "'size' 引數必須是正整數" #~ msgid "perl = TRUE is only fully implemented in UTF-8 locales" #~ msgstr "perl = TRUE 只適用於 UTF-8 語言環境" #, fuzzy #~ msgid "" #~ "ignore.case = TRUE, perl = TRUE, useBytes = TRUE\n" #~ " in UTF-8 locales only works caselessly for ASCII patterns" #~ msgstr "在 UTF-8 語言環境下 agrep() 只能適用於 ASCII 字串" #~ msgid "invalid backreference %d in regular expression" #~ msgstr "正規表示式中向後參考 %d 不正確" #~ msgid "could not allocate memory for approximate matching" #~ msgstr "做近似比較時無法指派足夠記憶體" #~ msgid "could not perform case insensitive matching" #~ msgstr "無法進行不區分大小寫的比較" #~ msgid "argument must be a character vector of length 1" #~ msgstr "引數必須是長度為 1 的字元向量" #~ msgid "" #~ "argument should be a character vector of length 1\n" #~ "all but the first element will be ignored" #~ msgstr "引數應當是長度為 1 的字元向量，除第一個字元外其它所有的字元都將忽略" #~ msgid "argument 'x' must be a raw vector" #~ msgstr "引數 'x' 必須是常數向量" #~ msgid "argument 'multiple' must be TRUE or FALSE" #~ msgstr "引數 'multiple' 的值必須是 TRUE 或 FALSE" #~ msgid "argument 'shift' must be a small integer" #~ msgstr "引數 'shift' 必須是小數值的整數" #~ msgid "argument 'x' must be an integer vector" #~ msgstr "引數 'x' 必須是整數向量" #~ msgid "argument 'x' must be raw, integer or logical" #~ msgstr "引數 'x' 必須是純量值、整數值或邏輯值" #~ msgid "argument 'type' must be a character string" #~ msgstr "引數「type」必須是字串" #~ msgid "argument 'x' must be a multiple of %d long" #~ msgstr "引數 'x' 必須是 %d 值的整數倍" #~ msgid "argument 'x' must not contain NAs" #~ msgstr "引數 'x' 不能含 NA 值" #~ msgid "R_decompress1 requires a raw vector" #~ msgstr "R_decompress1 需要純量向量" #, fuzzy #~ msgid "invalid \\uxxxx sequence (line %d)" #~ msgstr "\\uxxxx 序列不正確" #, fuzzy #~ msgid "invalid \\Uxxxxxxxx sequence (line %d)" #~ msgstr "\\U{xxxxxxxx} 序列不正確" #~ msgid "WARNING: UTF-8 locales are not supported in this build of R\n" #~ msgstr "警告: 此 R 編譯版本不支援 UTF-8 語言環境\n" #, fuzzy #~ msgid "WARNING: multibyte locales are not supported in this build of R\n" #~ msgstr "警告: 此 R 編譯版本不支援 UTF-8 語言環境\n" #, fuzzy #~ msgid "duplicate condition argument" #~ msgstr "第二個引數不正確" #, fuzzy #~ msgid "duplicate expr argument" #~ msgstr "不能有非字元名稱" #~ msgid "Success" #~ msgstr "執行成功" #~ msgid "No match" #~ msgstr "沒有符合的" #~ msgid "Invalid collation character" #~ msgstr "排序字元不正確" #~ msgid "Invalid character class name" #~ msgstr "字元類別名稱不正確" #~ msgid "Trailing backslash" #~ msgstr "末端有反斜線" #~ msgid "Invalid back reference" #~ msgstr "向後參考不正確" #~ msgid "Unmatched [ or [^" #~ msgstr "沒有符合的 [ 或 [^" #~ msgid "Unmatched ( or \\(" #~ msgstr "沒有符合的 ( 或 \\(" #~ msgid "Unmatched \\{" #~ msgstr "沒有符合的 \\{" #~ msgid "Invalid content of \\{\\}" #~ msgstr "\\{\\} 內容不正確" #~ msgid "Invalid range end" #~ msgstr "範圍下限不正確" #~ msgid "Memory exhausted" #~ msgstr "記憶體用盡" #~ msgid "Invalid preceding regular expression" #~ msgstr "前一個正規表示式不正確" #~ msgid "Premature end of regular expression" #~ msgstr "正規表示式沒有結尾" #~ msgid "Regular expression too big" #~ msgstr "正規表示式太大" #~ msgid "Unmatched ) or \\)" #~ msgstr "沒有符合的 ) 或 \\)" #~ msgid "No previous regular expression" #~ msgstr "前一個正規表示式不存在" #, fuzzy #~ msgid "invalid input in wtransChar" #~ msgstr "readChar() 的 UTF-8 輸入不正確" #~ msgid "second argument must be a list" #~ msgstr "第二個引數必須是串列" #~ msgid "invalid (NA) arguments." #~ msgstr "(NA) 引數不正確。" #~ msgid "re-encoding is not supported on this system" #~ msgstr "本系統不支援編碼轉換" #~ msgid "'iconv' is not available on this system" #~ msgstr "'iconv' 本系統沒有這個功能" #~ msgid "re-encoding is not available on this system" #~ msgstr "本系統沒有重新編碼這個功能" #~ msgid "unrecognised format at end of string" #~ msgstr "沒有這種在字串尾的格式" #~ msgid "zero-length argument" #~ msgstr "零長度引數" #~ msgid "first argument is not a matrix" #~ msgstr "第一個引數不是矩陣" #~ msgid "coordinates outsize specified range" #~ msgstr "座標比設定的範圍要大" #, fuzzy #~ msgid "%s%s on line %d" #~ msgstr "第 %d 列有語法錯誤" #, fuzzy #~ msgid "invalid input '%s' in mbcsToLatin1: omitted" #~ msgstr "mbcsToLatin1 輸入不正確" #, fuzzy #~ msgid "allocation failure in '%s'" #~ msgstr "指派 GVText 失敗" #~ msgid "Object \"%s\" not found" #~ msgstr "找不到這個目的物件 \"%s\"" #~ msgid "variable \"%s\" was not found" #~ msgstr "找不到 \"%s\" 這個變數" #~ msgid "object \"%s\" not found" #~ msgstr "找不到目的物件 \"%s\"" #~ msgid "argument 'x' must be a integer vector" #~ msgstr "引數 'x' 必須是整數向量" #~ msgid "symbol print-name too long" #~ msgstr "符號 print-name 太長" #~ msgid "argument is not an atomic vector" #~ msgstr "引數不是基元向量" #~ msgid "nothing to replace with" #~ msgstr "沒有可以替換的東西：" #~ msgid "conversion from encoding '%s' is unsupported" #~ msgstr "不支援編碼 '%s' 的轉換" #~ msgid "conversion to encoding '%s' is unsupported" #~ msgstr "不支援轉成編碼 '%s'" #~ msgid "cannot create fifo '%s'" #~ msgstr "無法建立先進先出 '%s'" #~ msgid "cannot open pipe() cmd '%s'" #~ msgstr "無法開啟 pipe() 命令 '%s'" #~ msgid "cannot open compressed file '%s'" #~ msgstr "無法開啟壓縮檔案 '%s'" #~ msgid "cannot open bzip2-ed file '%s'" #~ msgstr "無法開啟 bzip2 檔案 '%s'" #, fuzzy #~ msgid "cannot create file '%s'" #~ msgstr "無法建立先進先出 '%s'" #, fuzzy #~ msgid "cannot symlink '%s' to '%s'" #~ msgstr "無法開啟檔案 '%s'，原因是 '%s'" #, fuzzy #~ msgid "cannot rename file '%s' to '%s'" #~ msgstr "無法開啟檔案 '%s'，原因是 '%s'" #, fuzzy #~ msgid "cannot create dir '%s'" #~ msgstr "無法建立先進先出 '%s'" #, fuzzy #~ msgid "cannot save data -- unable to open '%s'" #~ msgstr "無法儲存資料 -- 無法開啟 %s" #~ msgid "cannot open destfile '%s'" #~ msgstr "無法開啟 destfile '%s'" #~ msgid "" #~ "Cannot open file '%s'\n" #~ "\n" #~ msgstr "" #~ "無法開啟檔案 '%s'\n" #~ "\n" #~ msgid "nchar() requires a character vector" #~ msgstr "nchar() 需要字元向量" #~ msgid "polynomial degree too high (49 max)" #~ msgstr "多項式次數太高 (最多只能 49)" #, fuzzy #~ msgid "cannot obtain size for the null device" #~ msgstr "沒有在使用中的或預設的裝置" #~ msgid "EOF whilst reading MBCS char" #~ msgstr "讀取 MBCS 位元組時遇到 EOF" #, fuzzy #~ msgid "unable to allocate space for source line %d" #~ msgstr "無法指派記憶體 (於 GEregister)" #, fuzzy #~ msgid "unsupported conversion in 'filenameToWchar'" #~ msgstr "不支援這種轉換" #, fuzzy #~ msgid "Unable to open file '%s': %s" #~ msgstr "無法開啟檔案 '%s'" #~ msgid "unable to open connection" #~ msgstr "無法開啟連結" #~ msgid "cannot open pipe() cmd '%s', reason '%s'" #~ msgstr "無法開啟 pipe() 命令 '%s'，原因是 '%s'" #~ msgid "file open failed" #~ msgstr "開啟檔案失敗" #~ msgid "" #~ "Cannot open file '%s', reason '%s'\n" #~ "\n" #~ msgstr "" #~ "無法開啟檔案 '%s'，原因是 '%s'\n" #~ "\n" #, fuzzy #~ msgid "unable to start device jpeg" #~ msgstr "無法開啟裝置 %s" #, fuzzy #~ msgid "invalid '%s' value), " #~ msgstr "'%s' 值不正確" #~ msgid "invalid 'only.values'" #~ msgstr "'only.values' 值不正確" #, fuzzy #~ msgid "invalid argument 'mode'" #~ msgstr "引數不正確" #, fuzzy #~ msgid "invalid 'byrow' value" #~ msgstr "矩陣: 'byrow' 值不正確" #~ msgid "invalid permutation ('perm')" #~ msgstr "排列不正確 ('perm')" #~ msgid "invalid value of 'n'" #~ msgstr "'n' 的值不正確" #~ msgid "invalid value of 'p'" #~ msgstr "'p' 的值不正確" #~ msgid "invalid value of 'na.rm'" #~ msgstr "'na.rm' 的值不正確" #~ msgid "invalid value of 'allow_'" #~ msgstr "'allow_' 值不正確" #~ msgid "invalid HSV color" #~ msgstr "HSV 顏色不正確" #, fuzzy #~ msgid "invalid value of '%s'" #~ msgstr "'n' 的值不正確" #~ msgid "invalid value for 'which'" #~ msgstr "'which' 的值不正確" #~ msgid "invalid value for 'n'" #~ msgstr "'n' 的值不正確" #~ msgid "invalid 'n'" #~ msgstr "'n' 值不正確" #~ msgid "invalid 'headers'" #~ msgstr "'headers' 不正確" #~ msgid "invalid 'title'" #~ msgstr "'title' 不正確" #~ msgid "invalid value of 'what' argument" #~ msgstr "'what' 引數的值不正確" #~ msgid "invalid 'what' specified" #~ msgstr "'what' 設定不正確" #, fuzzy #~ msgid "invalid value of 'title' in devWindows" #~ msgstr "'signed' 的值不正確" #~ msgid "Invalid color" #~ msgstr "顏色不正確" #~ msgid "cannot take snapshot of old-style device" #~ msgstr "無法擷取舊式裝置快照" #~ msgid "cannot play snapshot on old-style device" #~ msgstr "無法在舊式裝置上播放快照" #~ msgid "invalid graphics parameter list" #~ msgstr "繪圖參數串列不正確" #, fuzzy #~ msgid "cannot coerce type '%s' to vector of type '%s'" #~ msgstr "不能把類型 %s 強制變更成 %s 向量" #, fuzzy #~ msgid "cannot type '%s' coerce to vector" #~ msgstr "無法強制變更成向量" #~ msgid "invalid multibyte string" #~ msgstr "多位元組字串不正確" #~ msgid "invalid input in 'mbcsToLatin1'" #~ msgstr "'mbcsToLatin1' 輸入不正確" #~ msgid " " #~ msgstr "<錯誤: 編碼中的輸入不正確> " #~ msgid "'loadRconsole' can only be used in Rgui" #~ msgstr "'loadRconsole' 只能在 Rgui 中使用" #~ msgid "use of agrep() in a UTF-8 locale may only work for ASCII strings" #~ msgstr "在 UTF-8 語言環境下 agrep() 只能適用於 ASCII 字串" #~ msgid "allocation failure in 'mbcsToLatin1'" #~ msgstr "指派 'mbcsToLatin1' 失敗" #~ msgid "allocation failure in GVStrWidth" #~ msgstr "指派 GVStrWidth 失敗" #~ msgid "allocation failure in GVStrHeight" #~ msgstr "指派 GVStrHeight 失敗" #~ msgid "\\Uxxxxxxxx sequences are not supported on Windows" #~ msgstr "\\Uxxxxxxxx 序列於 Windows 上並不支援" #~ msgid "\\Uxxxxxxxx sequences are only valid in multibyte locales" #~ msgstr "\\Uxxxxxxxx 序列只於多位元組語區中才有效" #~ msgid "failed to find symbols in iconv.dll" #~ msgstr "iconv.dll 中找不到符號" #~ msgid "iconv.dll is not available on this system" #~ msgstr "iconv.dll 本系統沒有這個功能" #~ msgid "approx(): invalid f value" #~ msgstr "approx(): f 值無效" #~ msgid "approx(): invalid interpolation method" #~ msgstr "approx(): 插值方法無效" #~ msgid "approx(): attempted to interpolate NA values" #~ msgstr "approx(): 試圖插入 NA 值" #~ msgid "recursive default argument reference" #~ msgstr "預設引數參考出現遞迴" #~ msgid "String length exceeds buffer size of %d" #~ msgstr "字串長度超過了緩衝區的大小 %d" #~ msgid "could not allocate memory in C function 'R_AllocStringBuffer'" #~ msgstr "無法為 read.dcf 指派記憶體" #, fuzzy #~ msgid "cannot allocate memory block of size %0.1f Mb" #~ msgstr "無法分派大小為 %.0f 的記憶體區塊" #, fuzzy #~ msgid "cannot allocate memory block of size %0.1f Kb" #~ msgstr "無法分派大小為 %.0f 的記憶體區塊" #~ msgid "cannot allocate memory block of size %.0f" #~ msgstr "無法分派大小為 %.0f 的記憶體區塊" #~ msgid "out of memory" #~ msgstr "記憶體用盡" #~ msgid "incorrect number of arguments to 'row/col'" #~ msgstr "'row/col' 的引數數目不正確" #~ msgid "remove: variable \"%s\" was not found" #~ msgstr "remove: 找不到 \"%s\" 這個變數" #, fuzzy #~ msgid "invalid number of copies in rep.int()" #~ msgstr "rep() 中的拷貝數目不正確" #, fuzzy #~ msgid "invalid 'names' in 'R_unlink'" #~ msgstr "R_unlink 的 'names' 無效" #~ msgid "" #~ "longer object length\n" #~ "\tis not a multiple of shorter object length" #~ msgstr "長的目的物件長度不是短的目的物件長度的整數倍" #~ msgid "dim<- : invalid first argument" #~ msgstr "dim<-: 第一引數無效" #~ msgid "dim<- : invalid second argument" #~ msgstr "dim<-: 第二引數無效" #~ msgid "invalid slot type" #~ msgstr "插槽的類型不正確" #~ msgid "length<- invalid first argument" #~ msgstr "length<- 第一個引數不正確" #~ msgid "length<- invalid second argument" #~ msgstr "length<- 第二個引數不正確" #~ msgid "invalid substring argument(s) in substr()" #~ msgstr "substr() 中的子字串引數不正確" #~ msgid "invalid substring argument(s) in substr<-()" #~ msgstr " substr<-() 子字串引數不正確" #~ msgid "invalid right-hand side in substr<-()" #~ msgstr "substr<-() 函數右側表述不正確" #~ msgid "non-character argument in strsplit()" #~ msgstr "strsplit() 不能用於非字元引數" #~ msgid "non-character argument to tolower()" #~ msgstr "非字元引數不能用於 tolower()" #~ msgid "open/close not enabled for this connection" #~ msgstr "開啟/關閉不適用於此連結" #~ msgid "getc not enabled for this connection" #~ msgstr "getc 不適用於此連結" #~ msgid "read not enabled for this connection" #~ msgstr "不能讀取這個連結" #~ msgid "'%s' is deprecated" #~ msgstr "建議不要使用 '%s'" #, fuzzy #~ msgid "'\\%%%%' is an unrecognized escape in a character string" #~ msgstr "第一個引數必須是字串" #~ msgid "file.info() is not implemented on this system" #~ msgstr "本系統還沒有實作 file.info()" #~ msgid "'recursive = TRUE' is not supported on this platform" #~ msgstr "本平台不支援 'recursive=TRUE'" #~ msgid "invalid subscript" #~ msgstr "下標不正確" #~ msgid "file existence is not available on this system" #~ msgstr "本系統沒有檢查檔案是否存在此一功能" #~ msgid "file modification time is not available on this system" #~ msgstr "本系統沒有檢查檔案修改時間此一功能" #, fuzzy #~ msgid "'Sys.putenv' is not available on this system" #~ msgstr "'putenv' 本系統沒有這個功能" #, fuzzy #~ msgid "invalid 'f' argument" #~ msgstr "'%s' 引數不正確" #, fuzzy #~ msgid "invalid 'classes' argument" #~ msgstr "'%s' 引數不正確" #~ msgid "'%s' is not a logical" #~ msgstr "'%s' 不是邏輯值" #~ msgid "unknown URL scheme" #~ msgstr "沒有這種 URL 格式" #~ msgid "incorrect number of args to 'length'" #~ msgstr "'length' 的引數數目不正確" #~ msgid "ReadItem: unknown type %i" #~ msgstr "ReadItem：不明的類型 %i" #~ msgid "WARNING: no 'vsize' given\n" #~ msgstr "警告: 沒有設定 'vsize' 的值\n" #~ msgid "WARNING: '--vsize' value is invalid: ignored\n" #~ msgstr "警告: '--vsize' 的值不正確: 忽略不用\n" #~ msgid "WARNING: --vsize=%ld'%c': too large and ignored\n" #~ msgstr "警告: --vsize=%ld'%c': 太大，忽略不用\n" #~ msgid "WARNING: no 'nsize' given\n" #~ msgstr "警告: 沒有設定 'nsize' 的值\n" #~ msgid "WARNING: '--nsize' value is invalid: ignored\n" #~ msgstr "警告: '--nsize' 的值不正確: 忽略不用\n" #~ msgid "WARNING: --nsize=%lu'%c': too large and ignored\n" #~ msgstr "警告: --nsize=%lu'%c': 太大，忽略不用\n" #~ msgid "syntax error" #~ msgstr "語法錯誤" #~ msgid "syntax error in \"%s\"" #~ msgstr "語法錯誤發生於 \"%s\"" #~ msgid "using .GlobalEnv instead of '%s'" #~ msgstr "用 .GlobalEnv 而不用 '%s'" #~ msgid "namespaces not available; using .GlobalEnv" #~ msgstr "名稱空間不可用；使用 .GlobalEnv" #~ msgid "too many devices open" #~ msgstr "太多已經開啟的裝置" #~ msgid "supplied length is invalid" #~ msgstr "長度不正確" #~ msgid "the first argument must be a string" #~ msgstr "第一引數必須是字串" #~ msgid "unprotect(): stack imbalance" #~ msgstr "unprotect(): 堆疊不平衡" #~ msgid "first argument ('table') not of type VECSXP, from R_HashResize" #~ msgstr "R_HashResize 第一個引數 ('table') 非 VECSXP 類型" #~ msgid "first argument ('table') not of type VECSXP, R_HashSizeCheck" #~ msgstr "R_HashSizeCheck 第一個引數 ('table') 非 VECSXP 類型" #~ msgid "first argument ('table') not of type ENVSXP, from R_HashVector2Hash" #~ msgstr "R_HashVector2Hash 第一個引數 ('table') 非 ENVSXP 類型" #~ msgid "cannot get binding from base environment" #~ msgstr "無法從基本環境中取得繫結" #~ msgid "cannot get binding from base namespace" #~ msgstr "無法從基本名稱空間取得繫結" #~ msgid "locking the base environment is not supported yet" #~ msgstr "目前還不支援對基本環境進行鎖定" #~ msgid "invalid variable type for '%s'" #~ msgstr "'%s' 的變數類型不正確" #~ msgid "invalid variable type" #~ msgstr "變數類型不正確" #~ msgid "invalid value of 'which'" #~ msgstr "'which' 的值無效" #~ msgid "invalid first argument to remove()" #~ msgstr "remove() 的第一個引數不正確" #~ msgid "wrong length for 'ifnotfound' argument" #~ msgstr "'ifnotfound' 引數的長度不正確" #~ msgid "attach: invalid object name" #~ msgstr "attach: 目的物件名稱不正確" #~ msgid "invalid value for 'ok'" #~ msgstr "'ok' 的值不正確" #~ msgid "invalid value of 'what'" #~ msgstr "'what' 的值不正確" #~ msgid "invalid value of 'swap'" #~ msgstr "'swap' 的值不正確" #~ msgid "invalid value of 'sep'" #~ msgstr "'sep' 的值不正確" #~ msgid "invalid value for 'closeOnExit'" #~ msgstr "'closeOnExit' 的值不正確" #~ msgid "invalid value for 'type'" #~ msgstr "'type' 的值不正確" #~ msgid "invalid value for 'split'" #~ msgstr "'split' 的值不正確" #~ msgid "\\uxxxx sequences are only valid in multibyte locales" #~ msgstr "\\uxxxx 序列只有在多位元組語區中才有效" #~ msgid "" #~ "graphical parameter \"%s\" can not be set in high-level plot() function" #~ msgstr "高階 plot() 函數中不能設定繪圖參數 \"%s\""