double precision function dasum(n,dx,incx) c c takes the sum of the absolute values. c jack dongarra, linpack, 3/11/78. c modified 3/93 to return if incx .le. 0. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dtemp integer i,incx,m,mp1,n,nincx c dasum = 0.0d0 dtemp = 0.0d0 if( n.le.0 .or. incx.le.0 )return if(incx.eq.1)go to 20 c c code for increment not equal to 1 c nincx = n*incx do 10 i = 1,nincx,incx dtemp = dtemp + dabs(dx(i)) 10 continue dasum = dtemp return c c code for increment equal to 1 c c c clean-up loop c 20 m = mod(n,6) if( m .eq. 0 ) go to 40 do 30 i = 1,m dtemp = dtemp + dabs(dx(i)) 30 continue if( n .lt. 6 ) go to 60 40 mp1 = m + 1 do 50 i = mp1,n,6 dtemp = dtemp + dabs(dx(i)) + dabs(dx(i + 1)) + dabs(dx(i + 2)) * + dabs(dx(i + 3)) + dabs(dx(i + 4)) + dabs(dx(i + 5)) 50 continue 60 dasum = dtemp return end subroutine daxpy(n,da,dx,incx,dy,incy) c c constant times a vector plus a vector. c uses unrolled loops for increments equal to one. c jack dongarra, linpack, 3/11/78. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dy(*),da integer i,incx,incy,ix,iy,m,mp1,n c if(n.le.0)return if (da .eq. 0.0d0) return if(incx.eq.1.and.incy.eq.1)go to 20 c c code for unequal increments or equal increments c not equal to 1 c ix = 1 iy = 1 if(incx.lt.0)ix = (-n+1)*incx + 1 if(incy.lt.0)iy = (-n+1)*incy + 1 do 10 i = 1,n dy(iy) = dy(iy) + da*dx(ix) ix = ix + incx iy = iy + incy 10 continue return c c code for both increments equal to 1 c c c clean-up loop c 20 m = mod(n,4) if( m .eq. 0 ) go to 40 do 30 i = 1,m dy(i) = dy(i) + da*dx(i) 30 continue if( n .lt. 4 ) return 40 mp1 = m + 1 do 50 i = mp1,n,4 dy(i) = dy(i) + da*dx(i) dy(i + 1) = dy(i + 1) + da*dx(i + 1) dy(i + 2) = dy(i + 2) + da*dx(i + 2) dy(i + 3) = dy(i + 3) + da*dx(i + 3) 50 continue return end subroutine dcopy(n,dx,incx,dy,incy) c c copies a vector, x, to a vector, y. c uses unrolled loops for increments equal to one. c jack dongarra, linpack, 3/11/78. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dy(*) integer i,incx,incy,ix,iy,m,mp1,n c if(n.le.0)return if(incx.eq.1.and.incy.eq.1)go to 20 c c code for unequal increments or equal increments c not equal to 1 c ix = 1 iy = 1 if(incx.lt.0)ix = (-n+1)*incx + 1 if(incy.lt.0)iy = (-n+1)*incy + 1 do 10 i = 1,n dy(iy) = dx(ix) ix = ix + incx iy = iy + incy 10 continue return c c code for both increments equal to 1 c c c clean-up loop c 20 m = mod(n,7) if( m .eq. 0 ) go to 40 do 30 i = 1,m dy(i) = dx(i) 30 continue if( n .lt. 7 ) return 40 mp1 = m + 1 do 50 i = mp1,n,7 dy(i) = dx(i) dy(i + 1) = dx(i + 1) dy(i + 2) = dx(i + 2) dy(i + 3) = dx(i + 3) dy(i + 4) = dx(i + 4) dy(i + 5) = dx(i + 5) dy(i + 6) = dx(i + 6) 50 continue return end double precision function ddot(n,dx,incx,dy,incy) c c forms the dot product of two vectors. c uses unrolled loops for increments equal to one. c jack dongarra, linpack, 3/11/78. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dy(*),dtemp integer i,incx,incy,ix,iy,m,mp1,n c ddot = 0.0d0 dtemp = 0.0d0 if(n.le.0)return if(incx.eq.1.and.incy.eq.1)go to 20 c c code for unequal increments or equal increments c not equal to 1 c ix = 1 iy = 1 if(incx.lt.0)ix = (-n+1)*incx + 1 if(incy.lt.0)iy = (-n+1)*incy + 1 do 10 i = 1,n dtemp = dtemp + dx(ix)*dy(iy) ix = ix + incx iy = iy + incy 10 continue ddot = dtemp return c c code for both increments equal to 1 c c c clean-up loop c 20 m = mod(n,5) if( m .eq. 0 ) go to 40 do 30 i = 1,m dtemp = dtemp + dx(i)*dy(i) 30 continue if( n .lt. 5 ) go to 60 40 mp1 = m + 1 do 50 i = mp1,n,5 dtemp = dtemp + dx(i)*dy(i) + dx(i + 1)*dy(i + 1) + * dx(i + 2)*dy(i + 2) + dx(i + 3)*dy(i + 3) + dx(i + 4)*dy(i + 4) 50 continue 60 ddot = dtemp return end SUBROUTINE DGBMV ( TRANS, M, N, KL, KU, ALPHA, A, LDA, X, INCX, $ BETA, Y, INCY ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA, BETA INTEGER INCX, INCY, KL, KU, LDA, M, N CHARACTER*1 TRANS * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DGBMV performs one of the matrix-vector operations * * y := alpha*A*x + beta*y, or y := alpha*A'*x + beta*y, * * where alpha and beta are scalars, x and y are vectors and A is an * m by n band matrix, with kl sub-diagonals and ku super-diagonals. * * Parameters * ========== * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' y := alpha*A*x + beta*y. * * TRANS = 'T' or 't' y := alpha*A'*x + beta*y. * * TRANS = 'C' or 'c' y := alpha*A'*x + beta*y. * * Unchanged on exit. * * M - INTEGER. * On entry, M specifies the number of rows of the matrix A. * M must be at least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of the matrix A. * N must be at least zero. * Unchanged on exit. * * KL - INTEGER. * On entry, KL specifies the number of sub-diagonals of the * matrix A. KL must satisfy 0 .le. KL. * Unchanged on exit. * * KU - INTEGER. * On entry, KU specifies the number of super-diagonals of the * matrix A. KU must satisfy 0 .le. KU. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry, the leading ( kl + ku + 1 ) by n part of the * array A must contain the matrix of coefficients, supplied * column by column, with the leading diagonal of the matrix in * row ( ku + 1 ) of the array, the first super-diagonal * starting at position 2 in row ku, the first sub-diagonal * starting at position 1 in row ( ku + 2 ), and so on. * Elements in the array A that do not correspond to elements * in the band matrix (such as the top left ku by ku triangle) * are not referenced. * The following program segment will transfer a band matrix * from conventional full matrix storage to band storage: * * DO 20, J = 1, N * K = KU + 1 - J * DO 10, I = MAX( 1, J - KU ), MIN( M, J + KL ) * A( K + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * ( kl + ku + 1 ). * Unchanged on exit. * * X - DOUBLE PRECISION array of DIMENSION at least * ( 1 + ( n - 1 )*abs( INCX ) ) when TRANS = 'N' or 'n' * and at least * ( 1 + ( m - 1 )*abs( INCX ) ) otherwise. * Before entry, the incremented array X must contain the * vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. When BETA is * supplied as zero then Y need not be set on input. * Unchanged on exit. * * Y - DOUBLE PRECISION array of DIMENSION at least * ( 1 + ( m - 1 )*abs( INCY ) ) when TRANS = 'N' or 'n' * and at least * ( 1 + ( n - 1 )*abs( INCY ) ) otherwise. * Before entry, the incremented array Y must contain the * vector y. On exit, Y is overwritten by the updated vector y. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, IY, J, JX, JY, K, KUP1, KX, KY, $ LENX, LENY * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX, MIN * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 1 ELSE IF( M.LT.0 )THEN INFO = 2 ELSE IF( N.LT.0 )THEN INFO = 3 ELSE IF( KL.LT.0 )THEN INFO = 4 ELSE IF( KU.LT.0 )THEN INFO = 5 ELSE IF( LDA.LT.( KL + KU + 1 ) )THEN INFO = 8 ELSE IF( INCX.EQ.0 )THEN INFO = 10 ELSE IF( INCY.EQ.0 )THEN INFO = 13 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DGBMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( M.EQ.0 ).OR.( N.EQ.0 ).OR. $ ( ( ALPHA.EQ.ZERO ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * Set LENX and LENY, the lengths of the vectors x and y, and set * up the start points in X and Y. * IF( LSAME( TRANS, 'N' ) )THEN LENX = N LENY = M ELSE LENX = M LENY = N END IF IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( LENX - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( LENY - 1 )*INCY END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through the band part of A. * * First form y := beta*y. * IF( BETA.NE.ONE )THEN IF( INCY.EQ.1 )THEN IF( BETA.EQ.ZERO )THEN DO 10, I = 1, LENY Y( I ) = ZERO 10 CONTINUE ELSE DO 20, I = 1, LENY Y( I ) = BETA*Y( I ) 20 CONTINUE END IF ELSE IY = KY IF( BETA.EQ.ZERO )THEN DO 30, I = 1, LENY Y( IY ) = ZERO IY = IY + INCY 30 CONTINUE ELSE DO 40, I = 1, LENY Y( IY ) = BETA*Y( IY ) IY = IY + INCY 40 CONTINUE END IF END IF END IF IF( ALPHA.EQ.ZERO ) $ RETURN KUP1 = KU + 1 IF( LSAME( TRANS, 'N' ) )THEN * * Form y := alpha*A*x + y. * JX = KX IF( INCY.EQ.1 )THEN DO 60, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) K = KUP1 - J DO 50, I = MAX( 1, J - KU ), MIN( M, J + KL ) Y( I ) = Y( I ) + TEMP*A( K + I, J ) 50 CONTINUE END IF JX = JX + INCX 60 CONTINUE ELSE DO 80, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) IY = KY K = KUP1 - J DO 70, I = MAX( 1, J - KU ), MIN( M, J + KL ) Y( IY ) = Y( IY ) + TEMP*A( K + I, J ) IY = IY + INCY 70 CONTINUE END IF JX = JX + INCX IF( J.GT.KU ) $ KY = KY + INCY 80 CONTINUE END IF ELSE * * Form y := alpha*A'*x + y. * JY = KY IF( INCX.EQ.1 )THEN DO 100, J = 1, N TEMP = ZERO K = KUP1 - J DO 90, I = MAX( 1, J - KU ), MIN( M, J + KL ) TEMP = TEMP + A( K + I, J )*X( I ) 90 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP JY = JY + INCY 100 CONTINUE ELSE DO 120, J = 1, N TEMP = ZERO IX = KX K = KUP1 - J DO 110, I = MAX( 1, J - KU ), MIN( M, J + KL ) TEMP = TEMP + A( K + I, J )*X( IX ) IX = IX + INCX 110 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP JY = JY + INCY IF( J.GT.KU ) $ KX = KX + INCX 120 CONTINUE END IF END IF * RETURN * * End of DGBMV . * END SUBROUTINE DGEMM ( TRANSA, TRANSB, M, N, K, ALPHA, A, LDA, B, LDB, $ BETA, C, LDC ) * .. Scalar Arguments .. CHARACTER*1 TRANSA, TRANSB INTEGER M, N, K, LDA, LDB, LDC DOUBLE PRECISION ALPHA, BETA * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), B( LDB, * ), C( LDC, * ) * .. * * Purpose * ======= * * DGEMM performs one of the matrix-matrix operations * * C := alpha*op( A )*op( B ) + beta*C, * * where op( X ) is one of * * op( X ) = X or op( X ) = X', * * alpha and beta are scalars, and A, B and C are matrices, with op( A ) * an m by k matrix, op( B ) a k by n matrix and C an m by n matrix. * * Parameters * ========== * * TRANSA - CHARACTER*1. * On entry, TRANSA specifies the form of op( A ) to be used in * the matrix multiplication as follows: * * TRANSA = 'N' or 'n', op( A ) = A. * * TRANSA = 'T' or 't', op( A ) = A'. * * TRANSA = 'C' or 'c', op( A ) = A'. * * Unchanged on exit. * * TRANSB - CHARACTER*1. * On entry, TRANSB specifies the form of op( B ) to be used in * the matrix multiplication as follows: * * TRANSB = 'N' or 'n', op( B ) = B. * * TRANSB = 'T' or 't', op( B ) = B'. * * TRANSB = 'C' or 'c', op( B ) = B'. * * Unchanged on exit. * * M - INTEGER. * On entry, M specifies the number of rows of the matrix * op( A ) and of the matrix C. M must be at least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of the matrix * op( B ) and the number of columns of the matrix C. N must be * at least zero. * Unchanged on exit. * * K - INTEGER. * On entry, K specifies the number of columns of the matrix * op( A ) and the number of rows of the matrix op( B ). K must * be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, ka ), where ka is * k when TRANSA = 'N' or 'n', and is m otherwise. * Before entry with TRANSA = 'N' or 'n', the leading m by k * part of the array A must contain the matrix A, otherwise * the leading k by m part of the array A must contain the * matrix A. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. When TRANSA = 'N' or 'n' then * LDA must be at least max( 1, m ), otherwise LDA must be at * least max( 1, k ). * Unchanged on exit. * * B - DOUBLE PRECISION array of DIMENSION ( LDB, kb ), where kb is * n when TRANSB = 'N' or 'n', and is k otherwise. * Before entry with TRANSB = 'N' or 'n', the leading k by n * part of the array B must contain the matrix B, otherwise * the leading n by k part of the array B must contain the * matrix B. * Unchanged on exit. * * LDB - INTEGER. * On entry, LDB specifies the first dimension of B as declared * in the calling (sub) program. When TRANSB = 'N' or 'n' then * LDB must be at least max( 1, k ), otherwise LDB must be at * least max( 1, n ). * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. When BETA is * supplied as zero then C need not be set on input. * Unchanged on exit. * * C - DOUBLE PRECISION array of DIMENSION ( LDC, n ). * Before entry, the leading m by n part of the array C must * contain the matrix C, except when beta is zero, in which * case C need not be set on entry. * On exit, the array C is overwritten by the m by n matrix * ( alpha*op( A )*op( B ) + beta*C ). * * LDC - INTEGER. * On entry, LDC specifies the first dimension of C as declared * in the calling (sub) program. LDC must be at least * max( 1, m ). * Unchanged on exit. * * * Level 3 Blas routine. * * -- Written on 8-February-1989. * Jack Dongarra, Argonne National Laboratory. * Iain Duff, AERE Harwell. * Jeremy Du Croz, Numerical Algorithms Group Ltd. * Sven Hammarling, Numerical Algorithms Group Ltd. * * * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. Local Scalars .. LOGICAL NOTA, NOTB INTEGER I, INFO, J, L, NCOLA, NROWA, NROWB DOUBLE PRECISION TEMP * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. * .. Executable Statements .. * * Set NOTA and NOTB as true if A and B respectively are not * transposed and set NROWA, NCOLA and NROWB as the number of rows * and columns of A and the number of rows of B respectively. * NOTA = LSAME( TRANSA, 'N' ) NOTB = LSAME( TRANSB, 'N' ) IF( NOTA )THEN NROWA = M NCOLA = K ELSE NROWA = K NCOLA = M END IF IF( NOTB )THEN NROWB = K ELSE NROWB = N END IF * * Test the input parameters. * INFO = 0 IF( ( .NOT.NOTA ).AND. $ ( .NOT.LSAME( TRANSA, 'C' ) ).AND. $ ( .NOT.LSAME( TRANSA, 'T' ) ) )THEN INFO = 1 ELSE IF( ( .NOT.NOTB ).AND. $ ( .NOT.LSAME( TRANSB, 'C' ) ).AND. $ ( .NOT.LSAME( TRANSB, 'T' ) ) )THEN INFO = 2 ELSE IF( M .LT.0 )THEN INFO = 3 ELSE IF( N .LT.0 )THEN INFO = 4 ELSE IF( K .LT.0 )THEN INFO = 5 ELSE IF( LDA.LT.MAX( 1, NROWA ) )THEN INFO = 8 ELSE IF( LDB.LT.MAX( 1, NROWB ) )THEN INFO = 10 ELSE IF( LDC.LT.MAX( 1, M ) )THEN INFO = 13 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DGEMM ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( M.EQ.0 ).OR.( N.EQ.0 ).OR. $ ( ( ( ALPHA.EQ.ZERO ).OR.( K.EQ.0 ) ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * And if alpha.eq.zero. * IF( ALPHA.EQ.ZERO )THEN IF( BETA.EQ.ZERO )THEN DO 20, J = 1, N DO 10, I = 1, M C( I, J ) = ZERO 10 CONTINUE 20 CONTINUE ELSE DO 40, J = 1, N DO 30, I = 1, M C( I, J ) = BETA*C( I, J ) 30 CONTINUE 40 CONTINUE END IF RETURN END IF * * Start the operations. * IF( NOTB )THEN IF( NOTA )THEN * * Form C := alpha*A*B + beta*C. * DO 90, J = 1, N IF( BETA.EQ.ZERO )THEN DO 50, I = 1, M C( I, J ) = ZERO 50 CONTINUE ELSE IF( BETA.NE.ONE )THEN DO 60, I = 1, M C( I, J ) = BETA*C( I, J ) 60 CONTINUE END IF DO 80, L = 1, K IF( B( L, J ).NE.ZERO )THEN TEMP = ALPHA*B( L, J ) DO 70, I = 1, M C( I, J ) = C( I, J ) + TEMP*A( I, L ) 70 CONTINUE END IF 80 CONTINUE 90 CONTINUE ELSE * * Form C := alpha*A'*B + beta*C * DO 120, J = 1, N DO 110, I = 1, M TEMP = ZERO DO 100, L = 1, K TEMP = TEMP + A( L, I )*B( L, J ) 100 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = ALPHA*TEMP ELSE C( I, J ) = ALPHA*TEMP + BETA*C( I, J ) END IF 110 CONTINUE 120 CONTINUE END IF ELSE IF( NOTA )THEN * * Form C := alpha*A*B' + beta*C * DO 170, J = 1, N IF( BETA.EQ.ZERO )THEN DO 130, I = 1, M C( I, J ) = ZERO 130 CONTINUE ELSE IF( BETA.NE.ONE )THEN DO 140, I = 1, M C( I, J ) = BETA*C( I, J ) 140 CONTINUE END IF DO 160, L = 1, K IF( B( J, L ).NE.ZERO )THEN TEMP = ALPHA*B( J, L ) DO 150, I = 1, M C( I, J ) = C( I, J ) + TEMP*A( I, L ) 150 CONTINUE END IF 160 CONTINUE 170 CONTINUE ELSE * * Form C := alpha*A'*B' + beta*C * DO 200, J = 1, N DO 190, I = 1, M TEMP = ZERO DO 180, L = 1, K TEMP = TEMP + A( L, I )*B( J, L ) 180 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = ALPHA*TEMP ELSE C( I, J ) = ALPHA*TEMP + BETA*C( I, J ) END IF 190 CONTINUE 200 CONTINUE END IF END IF * RETURN * * End of DGEMM . * END SUBROUTINE DGEMV ( TRANS, M, N, ALPHA, A, LDA, X, INCX, $ BETA, Y, INCY ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA, BETA INTEGER INCX, INCY, LDA, M, N CHARACTER*1 TRANS * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DGEMV performs one of the matrix-vector operations * * y := alpha*A*x + beta*y, or y := alpha*A'*x + beta*y, * * where alpha and beta are scalars, x and y are vectors and A is an * m by n matrix. * * Parameters * ========== * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' y := alpha*A*x + beta*y. * * TRANS = 'T' or 't' y := alpha*A'*x + beta*y. * * TRANS = 'C' or 'c' y := alpha*A'*x + beta*y. * * Unchanged on exit. * * M - INTEGER. * On entry, M specifies the number of rows of the matrix A. * M must be at least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry, the leading m by n part of the array A must * contain the matrix of coefficients. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, m ). * Unchanged on exit. * * X - DOUBLE PRECISION array of DIMENSION at least * ( 1 + ( n - 1 )*abs( INCX ) ) when TRANS = 'N' or 'n' * and at least * ( 1 + ( m - 1 )*abs( INCX ) ) otherwise. * Before entry, the incremented array X must contain the * vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. When BETA is * supplied as zero then Y need not be set on input. * Unchanged on exit. * * Y - DOUBLE PRECISION array of DIMENSION at least * ( 1 + ( m - 1 )*abs( INCY ) ) when TRANS = 'N' or 'n' * and at least * ( 1 + ( n - 1 )*abs( INCY ) ) otherwise. * Before entry with BETA non-zero, the incremented array Y * must contain the vector y. On exit, Y is overwritten by the * updated vector y. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, IY, J, JX, JY, KX, KY, LENX, LENY * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 1 ELSE IF( M.LT.0 )THEN INFO = 2 ELSE IF( N.LT.0 )THEN INFO = 3 ELSE IF( LDA.LT.MAX( 1, M ) )THEN INFO = 6 ELSE IF( INCX.EQ.0 )THEN INFO = 8 ELSE IF( INCY.EQ.0 )THEN INFO = 11 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DGEMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( M.EQ.0 ).OR.( N.EQ.0 ).OR. $ ( ( ALPHA.EQ.ZERO ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * Set LENX and LENY, the lengths of the vectors x and y, and set * up the start points in X and Y. * IF( LSAME( TRANS, 'N' ) )THEN LENX = N LENY = M ELSE LENX = M LENY = N END IF IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( LENX - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( LENY - 1 )*INCY END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through A. * * First form y := beta*y. * IF( BETA.NE.ONE )THEN IF( INCY.EQ.1 )THEN IF( BETA.EQ.ZERO )THEN DO 10, I = 1, LENY Y( I ) = ZERO 10 CONTINUE ELSE DO 20, I = 1, LENY Y( I ) = BETA*Y( I ) 20 CONTINUE END IF ELSE IY = KY IF( BETA.EQ.ZERO )THEN DO 30, I = 1, LENY Y( IY ) = ZERO IY = IY + INCY 30 CONTINUE ELSE DO 40, I = 1, LENY Y( IY ) = BETA*Y( IY ) IY = IY + INCY 40 CONTINUE END IF END IF END IF IF( ALPHA.EQ.ZERO ) $ RETURN IF( LSAME( TRANS, 'N' ) )THEN * * Form y := alpha*A*x + y. * JX = KX IF( INCY.EQ.1 )THEN DO 60, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) DO 50, I = 1, M Y( I ) = Y( I ) + TEMP*A( I, J ) 50 CONTINUE END IF JX = JX + INCX 60 CONTINUE ELSE DO 80, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) IY = KY DO 70, I = 1, M Y( IY ) = Y( IY ) + TEMP*A( I, J ) IY = IY + INCY 70 CONTINUE END IF JX = JX + INCX 80 CONTINUE END IF ELSE * * Form y := alpha*A'*x + y. * JY = KY IF( INCX.EQ.1 )THEN DO 100, J = 1, N TEMP = ZERO DO 90, I = 1, M TEMP = TEMP + A( I, J )*X( I ) 90 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP JY = JY + INCY 100 CONTINUE ELSE DO 120, J = 1, N TEMP = ZERO IX = KX DO 110, I = 1, M TEMP = TEMP + A( I, J )*X( IX ) IX = IX + INCX 110 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP JY = JY + INCY 120 CONTINUE END IF END IF * RETURN * * End of DGEMV . * END SUBROUTINE DGER ( M, N, ALPHA, X, INCX, Y, INCY, A, LDA ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA INTEGER INCX, INCY, LDA, M, N * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DGER performs the rank 1 operation * * A := alpha*x*y' + A, * * where alpha is a scalar, x is an m element vector, y is an n element * vector and A is an m by n matrix. * * Parameters * ========== * * M - INTEGER. * On entry, M specifies the number of rows of the matrix A. * M must be at least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( m - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the m * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * Y - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCY ) ). * Before entry, the incremented array Y must contain the n * element vector y. * Unchanged on exit. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry, the leading m by n part of the array A must * contain the matrix of coefficients. On exit, A is * overwritten by the updated matrix. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, m ). * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JY, KX * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( M.LT.0 )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( INCX.EQ.0 )THEN INFO = 5 ELSE IF( INCY.EQ.0 )THEN INFO = 7 ELSE IF( LDA.LT.MAX( 1, M ) )THEN INFO = 9 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DGER ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( M.EQ.0 ).OR.( N.EQ.0 ).OR.( ALPHA.EQ.ZERO ) ) $ RETURN * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through A. * IF( INCY.GT.0 )THEN JY = 1 ELSE JY = 1 - ( N - 1 )*INCY END IF IF( INCX.EQ.1 )THEN DO 20, J = 1, N IF( Y( JY ).NE.ZERO )THEN TEMP = ALPHA*Y( JY ) DO 10, I = 1, M A( I, J ) = A( I, J ) + X( I )*TEMP 10 CONTINUE END IF JY = JY + INCY 20 CONTINUE ELSE IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( M - 1 )*INCX END IF DO 40, J = 1, N IF( Y( JY ).NE.ZERO )THEN TEMP = ALPHA*Y( JY ) IX = KX DO 30, I = 1, M A( I, J ) = A( I, J ) + X( IX )*TEMP IX = IX + INCX 30 CONTINUE END IF JY = JY + INCY 40 CONTINUE END IF * RETURN * * End of DGER . * END DOUBLE PRECISION FUNCTION DNRM2 ( N, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, N * .. Array Arguments .. DOUBLE PRECISION X( * ) * .. * * DNRM2 returns the euclidean norm of a vector via the function * name, so that * * DNRM2 := sqrt( x'*x ) * * * * -- This version written on 25-October-1982. * Modified on 14-October-1993 to inline the call to DLASSQ. * Sven Hammarling, Nag Ltd. * * * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. Local Scalars .. INTEGER IX DOUBLE PRECISION ABSXI, NORM, SCALE, SSQ * .. Intrinsic Functions .. INTRINSIC ABS, SQRT * .. * .. Executable Statements .. IF( N.LT.1 .OR. INCX.LT.1 )THEN NORM = ZERO ELSE IF( N.EQ.1 )THEN NORM = ABS( X( 1 ) ) ELSE SCALE = ZERO SSQ = ONE * The following loop is equivalent to this call to the LAPACK * auxiliary routine: * CALL DLASSQ( N, X, INCX, SCALE, SSQ ) * DO 10, IX = 1, 1 + ( N - 1 )*INCX, INCX IF( X( IX ).NE.ZERO )THEN ABSXI = ABS( X( IX ) ) IF( SCALE.LT.ABSXI )THEN SSQ = ONE + SSQ*( SCALE/ABSXI )**2 SCALE = ABSXI ELSE SSQ = SSQ + ( ABSXI/SCALE )**2 END IF END IF 10 CONTINUE NORM = SCALE * SQRT( SSQ ) END IF * DNRM2 = NORM RETURN * * End of DNRM2. * END subroutine drot (n,dx,incx,dy,incy,c,s) c c applies a plane rotation. c jack dongarra, linpack, 3/11/78. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dy(*),dtemp,c,s integer i,incx,incy,ix,iy,n c if(n.le.0)return if(incx.eq.1.and.incy.eq.1)go to 20 c c code for unequal increments or equal increments not equal c to 1 c ix = 1 iy = 1 if(incx.lt.0)ix = (-n+1)*incx + 1 if(incy.lt.0)iy = (-n+1)*incy + 1 do 10 i = 1,n dtemp = c*dx(ix) + s*dy(iy) dy(iy) = c*dy(iy) - s*dx(ix) dx(ix) = dtemp ix = ix + incx iy = iy + incy 10 continue return c c code for both increments equal to 1 c 20 do 30 i = 1,n dtemp = c*dx(i) + s*dy(i) dy(i) = c*dy(i) - s*dx(i) dx(i) = dtemp 30 continue return end subroutine drotg(da,db,c,s) c c construct givens plane rotation. c jack dongarra, linpack, 3/11/78. c double precision da,db,c,s,roe,scale,r,z c roe = db if( dabs(da) .gt. dabs(db) ) roe = da scale = dabs(da) + dabs(db) if( scale .ne. 0.0d0 ) go to 10 c = 1.0d0 s = 0.0d0 r = 0.0d0 z = 0.0d0 go to 20 10 r = scale*dsqrt((da/scale)**2 + (db/scale)**2) r = dsign(1.0d0,roe)*r c = da/r s = db/r z = 1.0d0 if( dabs(da) .gt. dabs(db) ) z = s if( dabs(db) .ge. dabs(da) .and. c .ne. 0.0d0 ) z = 1.0d0/c 20 da = r db = z return end SUBROUTINE DROTM (N,DX,INCX,DY,INCY,DPARAM) C C APPLY THE MODIFIED GIVENS TRANSFORMATION, H, TO THE 2 BY N MATRIX C C (DX**T) , WHERE **T INDICATES TRANSPOSE. THE ELEMENTS OF DX ARE IN C (DY**T) C C DX(LX+I*INCX), I = 0 TO N-1, WHERE LX = 1 IF INCX .GE. 0, ELSE C LX = (-INCX)*N, AND SIMILARLY FOR SY USING LY AND INCY. C WITH DPARAM(1)=DFLAG, H HAS ONE OF THE FOLLOWING FORMS.. C C DFLAG=-1.D0 DFLAG=0.D0 DFLAG=1.D0 DFLAG=-2.D0 C C (DH11 DH12) (1.D0 DH12) (DH11 1.D0) (1.D0 0.D0) C H=( ) ( ) ( ) ( ) C (DH21 DH22), (DH21 1.D0), (-1.D0 DH22), (0.D0 1.D0). C SEE DROTMG FOR A DESCRIPTION OF DATA STORAGE IN DPARAM. C INTEGER N, INCX, INCY INTEGER NSTEPS, I, KX,KY DOUBLE PRECISION DFLAG,DH12,DH22,DX,TWO,Z,DH11,DH21, 1 DPARAM,DY,W,ZERO DIMENSION DX(1),DY(1),DPARAM(5) DATA ZERO,TWO/0.D0,2.D0/ C DFLAG=DPARAM(1) IF(N .LE. 0 .OR.(DFLAG+TWO.EQ.ZERO)) GO TO 140 IF(.NOT.(INCX.EQ.INCY.AND. INCX .GT.0)) GO TO 70 C NSTEPS=N*INCX IF(DFLAG) 50,10,30 10 CONTINUE DH12=DPARAM(4) DH21=DPARAM(3) DO 20 I=1,NSTEPS,INCX W=DX(I) Z=DY(I) DX(I)=W+Z*DH12 DY(I)=W*DH21+Z 20 CONTINUE GO TO 140 30 CONTINUE DH11=DPARAM(2) DH22=DPARAM(5) DO 40 I=1,NSTEPS,INCX W=DX(I) Z=DY(I) DX(I)=W*DH11+Z DY(I)=-W+DH22*Z 40 CONTINUE GO TO 140 50 CONTINUE DH11=DPARAM(2) DH12=DPARAM(4) DH21=DPARAM(3) DH22=DPARAM(5) DO 60 I=1,NSTEPS,INCX W=DX(I) Z=DY(I) DX(I)=W*DH11+Z*DH12 DY(I)=W*DH21+Z*DH22 60 CONTINUE GO TO 140 70 CONTINUE KX=1 KY=1 IF(INCX .LT. 0) KX=1+(1-N)*INCX IF(INCY .LT. 0) KY=1+(1-N)*INCY C IF(DFLAG)120,80,100 80 CONTINUE DH12=DPARAM(4) DH21=DPARAM(3) DO 90 I=1,N W=DX(KX) Z=DY(KY) DX(KX)=W+Z*DH12 DY(KY)=W*DH21+Z KX=KX+INCX KY=KY+INCY 90 CONTINUE GO TO 140 100 CONTINUE DH11=DPARAM(2) DH22=DPARAM(5) DO 110 I=1,N W=DX(KX) Z=DY(KY) DX(KX)=W*DH11+Z DY(KY)=-W+DH22*Z KX=KX+INCX KY=KY+INCY 110 CONTINUE GO TO 140 120 CONTINUE DH11=DPARAM(2) DH12=DPARAM(4) DH21=DPARAM(3) DH22=DPARAM(5) DO 130 I=1,N W=DX(KX) Z=DY(KY) DX(KX)=W*DH11+Z*DH12 DY(KY)=W*DH21+Z*DH22 KX=KX+INCX KY=KY+INCY 130 CONTINUE 140 CONTINUE RETURN END SUBROUTINE DROTMG (DD1,DD2,DX1,DY1,DPARAM) C C CONSTRUCT THE MODIFIED GIVENS TRANSFORMATION MATRIX H WHICH ZEROS C THE SECOND COMPONENT OF THE 2-VECTOR (DSQRT(DD1)*DX1,DSQRT(DD2)* C DY2)**T. C WITH DPARAM(1)=DFLAG, H HAS ONE OF THE FOLLOWING FORMS.. C C DFLAG=-1.D0 DFLAG=0.D0 DFLAG=1.D0 DFLAG=-2.D0 C C (DH11 DH12) (1.D0 DH12) (DH11 1.D0) (1.D0 0.D0) C H=( ) ( ) ( ) ( ) C (DH21 DH22), (DH21 1.D0), (-1.D0 DH22), (0.D0 1.D0). C LOCATIONS 2-4 OF DPARAM CONTAIN DH11, DH21, DH12, AND DH22 C RESPECTIVELY. (VALUES OF 1.D0, -1.D0, OR 0.D0 IMPLIED BY THE C VALUE OF DPARAM(1) ARE NOT STORED IN DPARAM.) C C THE VALUES OF GAMSQ AND RGAMSQ SET IN THE DATA STATEMENT MAY BE C INEXACT. THIS IS OK AS THEY ARE ONLY USED FOR TESTING THE SIZE C OF DD1 AND DD2. ALL ACTUAL SCALING OF DATA IS DONE USING GAM. C DOUBLE PRECISION GAM,ONE,RGAMSQ,DD2,DH11,DH21,DPARAM,DP2, 1 DQ2,DU,DY1,ZERO,GAMSQ,DD1,DFLAG,DH12,DH22,DP1,DQ1, 2 DTEMP,DX1,TWO DIMENSION DPARAM(5) C INTEGER IGO C DATA ZERO,ONE,TWO /0.D0,1.D0,2.D0/ DATA GAM,GAMSQ,RGAMSQ/4096.D0,16777216.D0,5.9604645D-8/ C IF(.NOT. DD1 .LT. ZERO) GO TO 10 C GO ZERO-H-D-AND-DX1.. GO TO 60 10 CONTINUE C CASE-DD1-NONNEGATIVE DP2=DD2*DY1 IF(.NOT. DP2 .EQ. ZERO) GO TO 20 DFLAG=-TWO GO TO 260 C REGULAR-CASE.. 20 CONTINUE DP1=DD1*DX1 DQ2=DP2*DY1 DQ1=DP1*DX1 C IF(.NOT. DABS(DQ1) .GT. DABS(DQ2)) GO TO 40 DH21=-DY1/DX1 DH12=DP2/DP1 C DU=ONE-DH12*DH21 C IF(.NOT. DU .LE. ZERO) GO TO 30 C GO ZERO-H-D-AND-DX1.. GO TO 60 30 CONTINUE DFLAG=ZERO DD1=DD1/DU DD2=DD2/DU DX1=DX1*DU C GO SCALE-CHECK.. GO TO 100 40 CONTINUE IF(.NOT. DQ2 .LT. ZERO) GO TO 50 C GO ZERO-H-D-AND-DX1.. GO TO 60 50 CONTINUE DFLAG=ONE DH11=DP1/DP2 DH22=DX1/DY1 DU=ONE+DH11*DH22 DTEMP=DD2/DU DD2=DD1/DU DD1=DTEMP DX1=DY1*DU C GO SCALE-CHECK GO TO 100 C PROCEDURE..ZERO-H-D-AND-DX1.. 60 CONTINUE DFLAG=-ONE DH11=ZERO DH12=ZERO DH21=ZERO DH22=ZERO C DD1=ZERO DD2=ZERO DX1=ZERO C RETURN.. GO TO 220 C PROCEDURE..FIX-H.. 70 CONTINUE IF(.NOT. DFLAG .GE. ZERO) GO TO 90 C IF(.NOT. DFLAG .EQ. ZERO) GO TO 80 DH11=ONE DH22=ONE DFLAG=-ONE GO TO 90 80 CONTINUE DH21=-ONE DH12=ONE DFLAG=-ONE 90 CONTINUE GO TO IGO,(120,150,180,210) C PROCEDURE..SCALE-CHECK 100 CONTINUE 110 CONTINUE IF(.NOT. DD1 .LE. RGAMSQ) GO TO 130 IF(DD1 .EQ. ZERO) GO TO 160 ASSIGN 120 TO IGO C FIX-H.. GO TO 70 120 CONTINUE DD1=DD1*GAM**2 DX1=DX1/GAM DH11=DH11/GAM DH12=DH12/GAM GO TO 110 130 CONTINUE 140 CONTINUE IF(.NOT. DD1 .GE. GAMSQ) GO TO 160 ASSIGN 150 TO IGO C FIX-H.. GO TO 70 150 CONTINUE DD1=DD1/GAM**2 DX1=DX1*GAM DH11=DH11*GAM DH12=DH12*GAM GO TO 140 160 CONTINUE 170 CONTINUE IF(.NOT. DABS(DD2) .LE. RGAMSQ) GO TO 190 IF(DD2 .EQ. ZERO) GO TO 220 ASSIGN 180 TO IGO C FIX-H.. GO TO 70 180 CONTINUE DD2=DD2*GAM**2 DH21=DH21/GAM DH22=DH22/GAM GO TO 170 190 CONTINUE 200 CONTINUE IF(.NOT. DABS(DD2) .GE. GAMSQ) GO TO 220 ASSIGN 210 TO IGO C FIX-H.. GO TO 70 210 CONTINUE DD2=DD2/GAM**2 DH21=DH21*GAM DH22=DH22*GAM GO TO 200 220 CONTINUE IF(DFLAG)250,230,240 230 CONTINUE DPARAM(3)=DH21 DPARAM(4)=DH12 GO TO 260 240 CONTINUE DPARAM(2)=DH11 DPARAM(5)=DH22 GO TO 260 250 CONTINUE DPARAM(2)=DH11 DPARAM(3)=DH21 DPARAM(4)=DH12 DPARAM(5)=DH22 260 CONTINUE DPARAM(1)=DFLAG RETURN END SUBROUTINE DSBMV ( UPLO, N, K, ALPHA, A, LDA, X, INCX, $ BETA, Y, INCY ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA, BETA INTEGER INCX, INCY, K, LDA, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DSBMV performs the matrix-vector operation * * y := alpha*A*x + beta*y, * * where alpha and beta are scalars, x and y are n element vectors and * A is an n by n symmetric band matrix, with k super-diagonals. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the band matrix A is being supplied as * follows: * * UPLO = 'U' or 'u' The upper triangular part of A is * being supplied. * * UPLO = 'L' or 'l' The lower triangular part of A is * being supplied. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * K - INTEGER. * On entry, K specifies the number of super-diagonals of the * matrix A. K must satisfy 0 .le. K. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading ( k + 1 ) * by n part of the array A must contain the upper triangular * band part of the symmetric matrix, supplied column by * column, with the leading diagonal of the matrix in row * ( k + 1 ) of the array, the first super-diagonal starting at * position 2 in row k, and so on. The top left k by k triangle * of the array A is not referenced. * The following program segment will transfer the upper * triangular part of a symmetric band matrix from conventional * full matrix storage to band storage: * * DO 20, J = 1, N * M = K + 1 - J * DO 10, I = MAX( 1, J - K ), J * A( M + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Before entry with UPLO = 'L' or 'l', the leading ( k + 1 ) * by n part of the array A must contain the lower triangular * band part of the symmetric matrix, supplied column by * column, with the leading diagonal of the matrix in row 1 of * the array, the first sub-diagonal starting at position 1 in * row 2, and so on. The bottom right k by k triangle of the * array A is not referenced. * The following program segment will transfer the lower * triangular part of a symmetric band matrix from conventional * full matrix storage to band storage: * * DO 20, J = 1, N * M = 1 - J * DO 10, I = J, MIN( N, J + K ) * A( M + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * ( k + 1 ). * Unchanged on exit. * * X - DOUBLE PRECISION array of DIMENSION at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the * vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. * Unchanged on exit. * * Y - DOUBLE PRECISION array of DIMENSION at least * ( 1 + ( n - 1 )*abs( INCY ) ). * Before entry, the incremented array Y must contain the * vector y. On exit, Y is overwritten by the updated vector y. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP1, TEMP2 INTEGER I, INFO, IX, IY, J, JX, JY, KPLUS1, KX, KY, L * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX, MIN * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( K.LT.0 )THEN INFO = 3 ELSE IF( LDA.LT.( K + 1 ) )THEN INFO = 6 ELSE IF( INCX.EQ.0 )THEN INFO = 8 ELSE IF( INCY.EQ.0 )THEN INFO = 11 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSBMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ( ALPHA.EQ.ZERO ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * Set up the start points in X and Y. * IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( N - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( N - 1 )*INCY END IF * * Start the operations. In this version the elements of the array A * are accessed sequentially with one pass through A. * * First form y := beta*y. * IF( BETA.NE.ONE )THEN IF( INCY.EQ.1 )THEN IF( BETA.EQ.ZERO )THEN DO 10, I = 1, N Y( I ) = ZERO 10 CONTINUE ELSE DO 20, I = 1, N Y( I ) = BETA*Y( I ) 20 CONTINUE END IF ELSE IY = KY IF( BETA.EQ.ZERO )THEN DO 30, I = 1, N Y( IY ) = ZERO IY = IY + INCY 30 CONTINUE ELSE DO 40, I = 1, N Y( IY ) = BETA*Y( IY ) IY = IY + INCY 40 CONTINUE END IF END IF END IF IF( ALPHA.EQ.ZERO ) $ RETURN IF( LSAME( UPLO, 'U' ) )THEN * * Form y when upper triangle of A is stored. * KPLUS1 = K + 1 IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 60, J = 1, N TEMP1 = ALPHA*X( J ) TEMP2 = ZERO L = KPLUS1 - J DO 50, I = MAX( 1, J - K ), J - 1 Y( I ) = Y( I ) + TEMP1*A( L + I, J ) TEMP2 = TEMP2 + A( L + I, J )*X( I ) 50 CONTINUE Y( J ) = Y( J ) + TEMP1*A( KPLUS1, J ) + ALPHA*TEMP2 60 CONTINUE ELSE JX = KX JY = KY DO 80, J = 1, N TEMP1 = ALPHA*X( JX ) TEMP2 = ZERO IX = KX IY = KY L = KPLUS1 - J DO 70, I = MAX( 1, J - K ), J - 1 Y( IY ) = Y( IY ) + TEMP1*A( L + I, J ) TEMP2 = TEMP2 + A( L + I, J )*X( IX ) IX = IX + INCX IY = IY + INCY 70 CONTINUE Y( JY ) = Y( JY ) + TEMP1*A( KPLUS1, J ) + ALPHA*TEMP2 JX = JX + INCX JY = JY + INCY IF( J.GT.K )THEN KX = KX + INCX KY = KY + INCY END IF 80 CONTINUE END IF ELSE * * Form y when lower triangle of A is stored. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 100, J = 1, N TEMP1 = ALPHA*X( J ) TEMP2 = ZERO Y( J ) = Y( J ) + TEMP1*A( 1, J ) L = 1 - J DO 90, I = J + 1, MIN( N, J + K ) Y( I ) = Y( I ) + TEMP1*A( L + I, J ) TEMP2 = TEMP2 + A( L + I, J )*X( I ) 90 CONTINUE Y( J ) = Y( J ) + ALPHA*TEMP2 100 CONTINUE ELSE JX = KX JY = KY DO 120, J = 1, N TEMP1 = ALPHA*X( JX ) TEMP2 = ZERO Y( JY ) = Y( JY ) + TEMP1*A( 1, J ) L = 1 - J IX = JX IY = JY DO 110, I = J + 1, MIN( N, J + K ) IX = IX + INCX IY = IY + INCY Y( IY ) = Y( IY ) + TEMP1*A( L + I, J ) TEMP2 = TEMP2 + A( L + I, J )*X( IX ) 110 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP2 JX = JX + INCX JY = JY + INCY 120 CONTINUE END IF END IF * RETURN * * End of DSBMV . * END subroutine dscal(n,da,dx,incx) c c scales a vector by a constant. c uses unrolled loops for increment equal to one. c jack dongarra, linpack, 3/11/78. c modified 3/93 to return if incx .le. 0. c modified 12/3/93, array(1) declarations changed to array(*) c double precision da,dx(*) integer i,incx,m,mp1,n,nincx c if( n.le.0 .or. incx.le.0 )return if(incx.eq.1)go to 20 c c code for increment not equal to 1 c nincx = n*incx do 10 i = 1,nincx,incx dx(i) = da*dx(i) 10 continue return c c code for increment equal to 1 c c c clean-up loop c 20 m = mod(n,5) if( m .eq. 0 ) go to 40 do 30 i = 1,m dx(i) = da*dx(i) 30 continue if( n .lt. 5 ) return 40 mp1 = m + 1 do 50 i = mp1,n,5 dx(i) = da*dx(i) dx(i + 1) = da*dx(i + 1) dx(i + 2) = da*dx(i + 2) dx(i + 3) = da*dx(i + 3) dx(i + 4) = da*dx(i + 4) 50 continue return end *DECK DSDOT DOUBLE PRECISION FUNCTION DSDOT (N, SX, INCX, SY, INCY) C***BEGIN PROLOGUE DSDOT C***PURPOSE Compute the inner product of two vectors with extended C precision accumulation and result. C***LIBRARY SLATEC (BLAS) C***CATEGORY D1A4 C***TYPE DOUBLE PRECISION (DSDOT-D, DCDOT-C) C***KEYWORDS BLAS, COMPLEX VECTORS, DOT PRODUCT, INNER PRODUCT, C LINEAR ALGEBRA, VECTOR C***AUTHOR Lawson, C. L., (JPL) C Hanson, R. J., (SNLA) C Kincaid, D. R., (U. of Texas) C Krogh, F. T., (JPL) C***DESCRIPTION C C B L A S Subprogram C Description of Parameters C C --Input-- C N number of elements in input vector(s) C SX single precision vector with N elements C INCX storage spacing between elements of SX C SY single precision vector with N elements C INCY storage spacing between elements of SY C C --Output-- C DSDOT double precision dot product (zero if N.LE.0) C C Returns D.P. dot product accumulated in D.P., for S.P. SX and SY C DSDOT = sum for I = 0 to N-1 of SX(LX+I*INCX) * SY(LY+I*INCY), C where LX = 1 if INCX .GE. 0, else LX = 1+(1-N)*INCX, and LY is C defined in a similar way using INCY. C C***REFERENCES C. L. Lawson, R. J. Hanson, D. R. Kincaid and F. T. C Krogh, Basic linear algebra subprograms for Fortran C usage, Algorithm No. 539, Transactions on Mathematical C Software 5, 3 (September 1979), pp. 308-323. C***ROUTINES CALLED (NONE) C***REVISION HISTORY (YYMMDD) C 791001 DATE WRITTEN C 890831 Modified array declarations. (WRB) C 890831 REVISION DATE from Version 3.2 C 891214 Prologue converted to Version 4.0 format. (BAB) C 920310 Corrected definition of LX in DESCRIPTION. (WRB) C 920501 Reformatted the REFERENCES section. (WRB) C***END PROLOGUE DSDOT REAL SX(*),SY(*) INTEGER N, INCX, INCY C INTEGER KX,KY,I,NS C C***FIRST EXECUTABLE STATEMENT DSDOT DSDOT = 0.0D0 IF (N .LE. 0) RETURN IF (INCX.EQ.INCY .AND. INCX.GT.0) GO TO 20 C C Code for unequal or nonpositive increments. C KX = 1 KY = 1 IF (INCX .LT. 0) KX = 1+(1-N)*INCX IF (INCY .LT. 0) KY = 1+(1-N)*INCY DO 10 I = 1,N DSDOT = DSDOT + DBLE(SX(KX))*DBLE(SY(KY)) KX = KX + INCX KY = KY + INCY 10 CONTINUE RETURN C C Code for equal, positive, non-unit increments. C 20 NS = N*INCX DO 30 I = 1,NS,INCX DSDOT = DSDOT + DBLE(SX(I))*DBLE(SY(I)) 30 CONTINUE RETURN END SUBROUTINE DSPMV ( UPLO, N, ALPHA, AP, X, INCX, BETA, Y, INCY ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA, BETA INTEGER INCX, INCY, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION AP( * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DSPMV performs the matrix-vector operation * * y := alpha*A*x + beta*y, * * where alpha and beta are scalars, x and y are n element vectors and * A is an n by n symmetric matrix, supplied in packed form. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the matrix A is supplied in the packed * array AP as follows: * * UPLO = 'U' or 'u' The upper triangular part of A is * supplied in AP. * * UPLO = 'L' or 'l' The lower triangular part of A is * supplied in AP. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * AP - DOUBLE PRECISION array of DIMENSION at least * ( ( n*( n + 1 ) )/2 ). * Before entry with UPLO = 'U' or 'u', the array AP must * contain the upper triangular part of the symmetric matrix * packed sequentially, column by column, so that AP( 1 ) * contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) * and a( 2, 2 ) respectively, and so on. * Before entry with UPLO = 'L' or 'l', the array AP must * contain the lower triangular part of the symmetric matrix * packed sequentially, column by column, so that AP( 1 ) * contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) * and a( 3, 1 ) respectively, and so on. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. When BETA is * supplied as zero then Y need not be set on input. * Unchanged on exit. * * Y - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCY ) ). * Before entry, the incremented array Y must contain the n * element vector y. On exit, Y is overwritten by the updated * vector y. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP1, TEMP2 INTEGER I, INFO, IX, IY, J, JX, JY, K, KK, KX, KY * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( INCX.EQ.0 )THEN INFO = 6 ELSE IF( INCY.EQ.0 )THEN INFO = 9 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSPMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ( ALPHA.EQ.ZERO ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * Set up the start points in X and Y. * IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( N - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( N - 1 )*INCY END IF * * Start the operations. In this version the elements of the array AP * are accessed sequentially with one pass through AP. * * First form y := beta*y. * IF( BETA.NE.ONE )THEN IF( INCY.EQ.1 )THEN IF( BETA.EQ.ZERO )THEN DO 10, I = 1, N Y( I ) = ZERO 10 CONTINUE ELSE DO 20, I = 1, N Y( I ) = BETA*Y( I ) 20 CONTINUE END IF ELSE IY = KY IF( BETA.EQ.ZERO )THEN DO 30, I = 1, N Y( IY ) = ZERO IY = IY + INCY 30 CONTINUE ELSE DO 40, I = 1, N Y( IY ) = BETA*Y( IY ) IY = IY + INCY 40 CONTINUE END IF END IF END IF IF( ALPHA.EQ.ZERO ) $ RETURN KK = 1 IF( LSAME( UPLO, 'U' ) )THEN * * Form y when AP contains the upper triangle. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 60, J = 1, N TEMP1 = ALPHA*X( J ) TEMP2 = ZERO K = KK DO 50, I = 1, J - 1 Y( I ) = Y( I ) + TEMP1*AP( K ) TEMP2 = TEMP2 + AP( K )*X( I ) K = K + 1 50 CONTINUE Y( J ) = Y( J ) + TEMP1*AP( KK + J - 1 ) + ALPHA*TEMP2 KK = KK + J 60 CONTINUE ELSE JX = KX JY = KY DO 80, J = 1, N TEMP1 = ALPHA*X( JX ) TEMP2 = ZERO IX = KX IY = KY DO 70, K = KK, KK + J - 2 Y( IY ) = Y( IY ) + TEMP1*AP( K ) TEMP2 = TEMP2 + AP( K )*X( IX ) IX = IX + INCX IY = IY + INCY 70 CONTINUE Y( JY ) = Y( JY ) + TEMP1*AP( KK + J - 1 ) + ALPHA*TEMP2 JX = JX + INCX JY = JY + INCY KK = KK + J 80 CONTINUE END IF ELSE * * Form y when AP contains the lower triangle. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 100, J = 1, N TEMP1 = ALPHA*X( J ) TEMP2 = ZERO Y( J ) = Y( J ) + TEMP1*AP( KK ) K = KK + 1 DO 90, I = J + 1, N Y( I ) = Y( I ) + TEMP1*AP( K ) TEMP2 = TEMP2 + AP( K )*X( I ) K = K + 1 90 CONTINUE Y( J ) = Y( J ) + ALPHA*TEMP2 KK = KK + ( N - J + 1 ) 100 CONTINUE ELSE JX = KX JY = KY DO 120, J = 1, N TEMP1 = ALPHA*X( JX ) TEMP2 = ZERO Y( JY ) = Y( JY ) + TEMP1*AP( KK ) IX = JX IY = JY DO 110, K = KK + 1, KK + N - J IX = IX + INCX IY = IY + INCY Y( IY ) = Y( IY ) + TEMP1*AP( K ) TEMP2 = TEMP2 + AP( K )*X( IX ) 110 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP2 JX = JX + INCX JY = JY + INCY KK = KK + ( N - J + 1 ) 120 CONTINUE END IF END IF * RETURN * * End of DSPMV . * END SUBROUTINE DSPR ( UPLO, N, ALPHA, X, INCX, AP ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA INTEGER INCX, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION AP( * ), X( * ) * .. * * Purpose * ======= * * DSPR performs the symmetric rank 1 operation * * A := alpha*x*x' + A, * * where alpha is a real scalar, x is an n element vector and A is an * n by n symmetric matrix, supplied in packed form. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the matrix A is supplied in the packed * array AP as follows: * * UPLO = 'U' or 'u' The upper triangular part of A is * supplied in AP. * * UPLO = 'L' or 'l' The lower triangular part of A is * supplied in AP. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * AP - DOUBLE PRECISION array of DIMENSION at least * ( ( n*( n + 1 ) )/2 ). * Before entry with UPLO = 'U' or 'u', the array AP must * contain the upper triangular part of the symmetric matrix * packed sequentially, column by column, so that AP( 1 ) * contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) * and a( 2, 2 ) respectively, and so on. On exit, the array * AP is overwritten by the upper triangular part of the * updated matrix. * Before entry with UPLO = 'L' or 'l', the array AP must * contain the lower triangular part of the symmetric matrix * packed sequentially, column by column, so that AP( 1 ) * contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) * and a( 3, 1 ) respectively, and so on. On exit, the array * AP is overwritten by the lower triangular part of the * updated matrix. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, K, KK, KX * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( INCX.EQ.0 )THEN INFO = 5 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSPR ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ALPHA.EQ.ZERO ) ) $ RETURN * * Set the start point in X if the increment is not unity. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of the array AP * are accessed sequentially with one pass through AP. * KK = 1 IF( LSAME( UPLO, 'U' ) )THEN * * Form A when upper triangle is stored in AP. * IF( INCX.EQ.1 )THEN DO 20, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = ALPHA*X( J ) K = KK DO 10, I = 1, J AP( K ) = AP( K ) + X( I )*TEMP K = K + 1 10 CONTINUE END IF KK = KK + J 20 CONTINUE ELSE JX = KX DO 40, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) IX = KX DO 30, K = KK, KK + J - 1 AP( K ) = AP( K ) + X( IX )*TEMP IX = IX + INCX 30 CONTINUE END IF JX = JX + INCX KK = KK + J 40 CONTINUE END IF ELSE * * Form A when lower triangle is stored in AP. * IF( INCX.EQ.1 )THEN DO 60, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = ALPHA*X( J ) K = KK DO 50, I = J, N AP( K ) = AP( K ) + X( I )*TEMP K = K + 1 50 CONTINUE END IF KK = KK + N - J + 1 60 CONTINUE ELSE JX = KX DO 80, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) IX = JX DO 70, K = KK, KK + N - J AP( K ) = AP( K ) + X( IX )*TEMP IX = IX + INCX 70 CONTINUE END IF JX = JX + INCX KK = KK + N - J + 1 80 CONTINUE END IF END IF * RETURN * * End of DSPR . * END SUBROUTINE DSPR2 ( UPLO, N, ALPHA, X, INCX, Y, INCY, AP ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA INTEGER INCX, INCY, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION AP( * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DSPR2 performs the symmetric rank 2 operation * * A := alpha*x*y' + alpha*y*x' + A, * * where alpha is a scalar, x and y are n element vectors and A is an * n by n symmetric matrix, supplied in packed form. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the matrix A is supplied in the packed * array AP as follows: * * UPLO = 'U' or 'u' The upper triangular part of A is * supplied in AP. * * UPLO = 'L' or 'l' The lower triangular part of A is * supplied in AP. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * Y - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCY ) ). * Before entry, the incremented array Y must contain the n * element vector y. * Unchanged on exit. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * AP - DOUBLE PRECISION array of DIMENSION at least * ( ( n*( n + 1 ) )/2 ). * Before entry with UPLO = 'U' or 'u', the array AP must * contain the upper triangular part of the symmetric matrix * packed sequentially, column by column, so that AP( 1 ) * contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 1, 2 ) * and a( 2, 2 ) respectively, and so on. On exit, the array * AP is overwritten by the upper triangular part of the * updated matrix. * Before entry with UPLO = 'L' or 'l', the array AP must * contain the lower triangular part of the symmetric matrix * packed sequentially, column by column, so that AP( 1 ) * contains a( 1, 1 ), AP( 2 ) and AP( 3 ) contain a( 2, 1 ) * and a( 3, 1 ) respectively, and so on. On exit, the array * AP is overwritten by the lower triangular part of the * updated matrix. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP1, TEMP2 INTEGER I, INFO, IX, IY, J, JX, JY, K, KK, KX, KY * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( INCX.EQ.0 )THEN INFO = 5 ELSE IF( INCY.EQ.0 )THEN INFO = 7 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSPR2 ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ALPHA.EQ.ZERO ) ) $ RETURN * * Set up the start points in X and Y if the increments are not both * unity. * IF( ( INCX.NE.1 ).OR.( INCY.NE.1 ) )THEN IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( N - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( N - 1 )*INCY END IF JX = KX JY = KY END IF * * Start the operations. In this version the elements of the array AP * are accessed sequentially with one pass through AP. * KK = 1 IF( LSAME( UPLO, 'U' ) )THEN * * Form A when upper triangle is stored in AP. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 20, J = 1, N IF( ( X( J ).NE.ZERO ).OR.( Y( J ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( J ) TEMP2 = ALPHA*X( J ) K = KK DO 10, I = 1, J AP( K ) = AP( K ) + X( I )*TEMP1 + Y( I )*TEMP2 K = K + 1 10 CONTINUE END IF KK = KK + J 20 CONTINUE ELSE DO 40, J = 1, N IF( ( X( JX ).NE.ZERO ).OR.( Y( JY ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( JY ) TEMP2 = ALPHA*X( JX ) IX = KX IY = KY DO 30, K = KK, KK + J - 1 AP( K ) = AP( K ) + X( IX )*TEMP1 + Y( IY )*TEMP2 IX = IX + INCX IY = IY + INCY 30 CONTINUE END IF JX = JX + INCX JY = JY + INCY KK = KK + J 40 CONTINUE END IF ELSE * * Form A when lower triangle is stored in AP. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 60, J = 1, N IF( ( X( J ).NE.ZERO ).OR.( Y( J ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( J ) TEMP2 = ALPHA*X( J ) K = KK DO 50, I = J, N AP( K ) = AP( K ) + X( I )*TEMP1 + Y( I )*TEMP2 K = K + 1 50 CONTINUE END IF KK = KK + N - J + 1 60 CONTINUE ELSE DO 80, J = 1, N IF( ( X( JX ).NE.ZERO ).OR.( Y( JY ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( JY ) TEMP2 = ALPHA*X( JX ) IX = JX IY = JY DO 70, K = KK, KK + N - J AP( K ) = AP( K ) + X( IX )*TEMP1 + Y( IY )*TEMP2 IX = IX + INCX IY = IY + INCY 70 CONTINUE END IF JX = JX + INCX JY = JY + INCY KK = KK + N - J + 1 80 CONTINUE END IF END IF * RETURN * * End of DSPR2 . * END subroutine dswap (n,dx,incx,dy,incy) c c interchanges two vectors. c uses unrolled loops for increments equal one. c jack dongarra, linpack, 3/11/78. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dy(*),dtemp integer i,incx,incy,ix,iy,m,mp1,n c if(n.le.0)return if(incx.eq.1.and.incy.eq.1)go to 20 c c code for unequal increments or equal increments not equal c to 1 c ix = 1 iy = 1 if(incx.lt.0)ix = (-n+1)*incx + 1 if(incy.lt.0)iy = (-n+1)*incy + 1 do 10 i = 1,n dtemp = dx(ix) dx(ix) = dy(iy) dy(iy) = dtemp ix = ix + incx iy = iy + incy 10 continue return c c code for both increments equal to 1 c c c clean-up loop c 20 m = mod(n,3) if( m .eq. 0 ) go to 40 do 30 i = 1,m dtemp = dx(i) dx(i) = dy(i) dy(i) = dtemp 30 continue if( n .lt. 3 ) return 40 mp1 = m + 1 do 50 i = mp1,n,3 dtemp = dx(i) dx(i) = dy(i) dy(i) = dtemp dtemp = dx(i + 1) dx(i + 1) = dy(i + 1) dy(i + 1) = dtemp dtemp = dx(i + 2) dx(i + 2) = dy(i + 2) dy(i + 2) = dtemp 50 continue return end SUBROUTINE DSYMM ( SIDE, UPLO, M, N, ALPHA, A, LDA, B, LDB, $ BETA, C, LDC ) * .. Scalar Arguments .. CHARACTER*1 SIDE, UPLO INTEGER M, N, LDA, LDB, LDC DOUBLE PRECISION ALPHA, BETA * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), B( LDB, * ), C( LDC, * ) * .. * * Purpose * ======= * * DSYMM performs one of the matrix-matrix operations * * C := alpha*A*B + beta*C, * * or * * C := alpha*B*A + beta*C, * * where alpha and beta are scalars, A is a symmetric matrix and B and * C are m by n matrices. * * Parameters * ========== * * SIDE - CHARACTER*1. * On entry, SIDE specifies whether the symmetric matrix A * appears on the left or right in the operation as follows: * * SIDE = 'L' or 'l' C := alpha*A*B + beta*C, * * SIDE = 'R' or 'r' C := alpha*B*A + beta*C, * * Unchanged on exit. * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the symmetric matrix A is to be * referenced as follows: * * UPLO = 'U' or 'u' Only the upper triangular part of the * symmetric matrix is to be referenced. * * UPLO = 'L' or 'l' Only the lower triangular part of the * symmetric matrix is to be referenced. * * Unchanged on exit. * * M - INTEGER. * On entry, M specifies the number of rows of the matrix C. * M must be at least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of the matrix C. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, ka ), where ka is * m when SIDE = 'L' or 'l' and is n otherwise. * Before entry with SIDE = 'L' or 'l', the m by m part of * the array A must contain the symmetric matrix, such that * when UPLO = 'U' or 'u', the leading m by m upper triangular * part of the array A must contain the upper triangular part * of the symmetric matrix and the strictly lower triangular * part of A is not referenced, and when UPLO = 'L' or 'l', * the leading m by m lower triangular part of the array A * must contain the lower triangular part of the symmetric * matrix and the strictly upper triangular part of A is not * referenced. * Before entry with SIDE = 'R' or 'r', the n by n part of * the array A must contain the symmetric matrix, such that * when UPLO = 'U' or 'u', the leading n by n upper triangular * part of the array A must contain the upper triangular part * of the symmetric matrix and the strictly lower triangular * part of A is not referenced, and when UPLO = 'L' or 'l', * the leading n by n lower triangular part of the array A * must contain the lower triangular part of the symmetric * matrix and the strictly upper triangular part of A is not * referenced. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. When SIDE = 'L' or 'l' then * LDA must be at least max( 1, m ), otherwise LDA must be at * least max( 1, n ). * Unchanged on exit. * * B - DOUBLE PRECISION array of DIMENSION ( LDB, n ). * Before entry, the leading m by n part of the array B must * contain the matrix B. * Unchanged on exit. * * LDB - INTEGER. * On entry, LDB specifies the first dimension of B as declared * in the calling (sub) program. LDB must be at least * max( 1, m ). * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. When BETA is * supplied as zero then C need not be set on input. * Unchanged on exit. * * C - DOUBLE PRECISION array of DIMENSION ( LDC, n ). * Before entry, the leading m by n part of the array C must * contain the matrix C, except when beta is zero, in which * case C need not be set on entry. * On exit, the array C is overwritten by the m by n updated * matrix. * * LDC - INTEGER. * On entry, LDC specifies the first dimension of C as declared * in the calling (sub) program. LDC must be at least * max( 1, m ). * Unchanged on exit. * * * Level 3 Blas routine. * * -- Written on 8-February-1989. * Jack Dongarra, Argonne National Laboratory. * Iain Duff, AERE Harwell. * Jeremy Du Croz, Numerical Algorithms Group Ltd. * Sven Hammarling, Numerical Algorithms Group Ltd. * * * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. Local Scalars .. LOGICAL UPPER INTEGER I, INFO, J, K, NROWA DOUBLE PRECISION TEMP1, TEMP2 * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. * .. Executable Statements .. * * Set NROWA as the number of rows of A. * IF( LSAME( SIDE, 'L' ) )THEN NROWA = M ELSE NROWA = N END IF UPPER = LSAME( UPLO, 'U' ) * * Test the input parameters. * INFO = 0 IF( ( .NOT.LSAME( SIDE, 'L' ) ).AND. $ ( .NOT.LSAME( SIDE, 'R' ) ) )THEN INFO = 1 ELSE IF( ( .NOT.UPPER ).AND. $ ( .NOT.LSAME( UPLO, 'L' ) ) )THEN INFO = 2 ELSE IF( M .LT.0 )THEN INFO = 3 ELSE IF( N .LT.0 )THEN INFO = 4 ELSE IF( LDA.LT.MAX( 1, NROWA ) )THEN INFO = 7 ELSE IF( LDB.LT.MAX( 1, M ) )THEN INFO = 9 ELSE IF( LDC.LT.MAX( 1, M ) )THEN INFO = 12 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSYMM ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( M.EQ.0 ).OR.( N.EQ.0 ).OR. $ ( ( ALPHA.EQ.ZERO ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * And when alpha.eq.zero. * IF( ALPHA.EQ.ZERO )THEN IF( BETA.EQ.ZERO )THEN DO 20, J = 1, N DO 10, I = 1, M C( I, J ) = ZERO 10 CONTINUE 20 CONTINUE ELSE DO 40, J = 1, N DO 30, I = 1, M C( I, J ) = BETA*C( I, J ) 30 CONTINUE 40 CONTINUE END IF RETURN END IF * * Start the operations. * IF( LSAME( SIDE, 'L' ) )THEN * * Form C := alpha*A*B + beta*C. * IF( UPPER )THEN DO 70, J = 1, N DO 60, I = 1, M TEMP1 = ALPHA*B( I, J ) TEMP2 = ZERO DO 50, K = 1, I - 1 C( K, J ) = C( K, J ) + TEMP1 *A( K, I ) TEMP2 = TEMP2 + B( K, J )*A( K, I ) 50 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = TEMP1*A( I, I ) + ALPHA*TEMP2 ELSE C( I, J ) = BETA *C( I, J ) + $ TEMP1*A( I, I ) + ALPHA*TEMP2 END IF 60 CONTINUE 70 CONTINUE ELSE DO 100, J = 1, N DO 90, I = M, 1, -1 TEMP1 = ALPHA*B( I, J ) TEMP2 = ZERO DO 80, K = I + 1, M C( K, J ) = C( K, J ) + TEMP1 *A( K, I ) TEMP2 = TEMP2 + B( K, J )*A( K, I ) 80 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = TEMP1*A( I, I ) + ALPHA*TEMP2 ELSE C( I, J ) = BETA *C( I, J ) + $ TEMP1*A( I, I ) + ALPHA*TEMP2 END IF 90 CONTINUE 100 CONTINUE END IF ELSE * * Form C := alpha*B*A + beta*C. * DO 170, J = 1, N TEMP1 = ALPHA*A( J, J ) IF( BETA.EQ.ZERO )THEN DO 110, I = 1, M C( I, J ) = TEMP1*B( I, J ) 110 CONTINUE ELSE DO 120, I = 1, M C( I, J ) = BETA*C( I, J ) + TEMP1*B( I, J ) 120 CONTINUE END IF DO 140, K = 1, J - 1 IF( UPPER )THEN TEMP1 = ALPHA*A( K, J ) ELSE TEMP1 = ALPHA*A( J, K ) END IF DO 130, I = 1, M C( I, J ) = C( I, J ) + TEMP1*B( I, K ) 130 CONTINUE 140 CONTINUE DO 160, K = J + 1, N IF( UPPER )THEN TEMP1 = ALPHA*A( J, K ) ELSE TEMP1 = ALPHA*A( K, J ) END IF DO 150, I = 1, M C( I, J ) = C( I, J ) + TEMP1*B( I, K ) 150 CONTINUE 160 CONTINUE 170 CONTINUE END IF * RETURN * * End of DSYMM . * END SUBROUTINE DSYMV ( UPLO, N, ALPHA, A, LDA, X, INCX, $ BETA, Y, INCY ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA, BETA INTEGER INCX, INCY, LDA, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DSYMV performs the matrix-vector operation * * y := alpha*A*x + beta*y, * * where alpha and beta are scalars, x and y are n element vectors and * A is an n by n symmetric matrix. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the array A is to be referenced as * follows: * * UPLO = 'U' or 'u' Only the upper triangular part of A * is to be referenced. * * UPLO = 'L' or 'l' Only the lower triangular part of A * is to be referenced. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array A must contain the upper * triangular part of the symmetric matrix and the strictly * lower triangular part of A is not referenced. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array A must contain the lower * triangular part of the symmetric matrix and the strictly * upper triangular part of A is not referenced. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, n ). * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. When BETA is * supplied as zero then Y need not be set on input. * Unchanged on exit. * * Y - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCY ) ). * Before entry, the incremented array Y must contain the n * element vector y. On exit, Y is overwritten by the updated * vector y. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP1, TEMP2 INTEGER I, INFO, IX, IY, J, JX, JY, KX, KY * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( LDA.LT.MAX( 1, N ) )THEN INFO = 5 ELSE IF( INCX.EQ.0 )THEN INFO = 7 ELSE IF( INCY.EQ.0 )THEN INFO = 10 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSYMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ( ALPHA.EQ.ZERO ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * Set up the start points in X and Y. * IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( N - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( N - 1 )*INCY END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through the triangular part * of A. * * First form y := beta*y. * IF( BETA.NE.ONE )THEN IF( INCY.EQ.1 )THEN IF( BETA.EQ.ZERO )THEN DO 10, I = 1, N Y( I ) = ZERO 10 CONTINUE ELSE DO 20, I = 1, N Y( I ) = BETA*Y( I ) 20 CONTINUE END IF ELSE IY = KY IF( BETA.EQ.ZERO )THEN DO 30, I = 1, N Y( IY ) = ZERO IY = IY + INCY 30 CONTINUE ELSE DO 40, I = 1, N Y( IY ) = BETA*Y( IY ) IY = IY + INCY 40 CONTINUE END IF END IF END IF IF( ALPHA.EQ.ZERO ) $ RETURN IF( LSAME( UPLO, 'U' ) )THEN * * Form y when A is stored in upper triangle. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 60, J = 1, N TEMP1 = ALPHA*X( J ) TEMP2 = ZERO DO 50, I = 1, J - 1 Y( I ) = Y( I ) + TEMP1*A( I, J ) TEMP2 = TEMP2 + A( I, J )*X( I ) 50 CONTINUE Y( J ) = Y( J ) + TEMP1*A( J, J ) + ALPHA*TEMP2 60 CONTINUE ELSE JX = KX JY = KY DO 80, J = 1, N TEMP1 = ALPHA*X( JX ) TEMP2 = ZERO IX = KX IY = KY DO 70, I = 1, J - 1 Y( IY ) = Y( IY ) + TEMP1*A( I, J ) TEMP2 = TEMP2 + A( I, J )*X( IX ) IX = IX + INCX IY = IY + INCY 70 CONTINUE Y( JY ) = Y( JY ) + TEMP1*A( J, J ) + ALPHA*TEMP2 JX = JX + INCX JY = JY + INCY 80 CONTINUE END IF ELSE * * Form y when A is stored in lower triangle. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 100, J = 1, N TEMP1 = ALPHA*X( J ) TEMP2 = ZERO Y( J ) = Y( J ) + TEMP1*A( J, J ) DO 90, I = J + 1, N Y( I ) = Y( I ) + TEMP1*A( I, J ) TEMP2 = TEMP2 + A( I, J )*X( I ) 90 CONTINUE Y( J ) = Y( J ) + ALPHA*TEMP2 100 CONTINUE ELSE JX = KX JY = KY DO 120, J = 1, N TEMP1 = ALPHA*X( JX ) TEMP2 = ZERO Y( JY ) = Y( JY ) + TEMP1*A( J, J ) IX = JX IY = JY DO 110, I = J + 1, N IX = IX + INCX IY = IY + INCY Y( IY ) = Y( IY ) + TEMP1*A( I, J ) TEMP2 = TEMP2 + A( I, J )*X( IX ) 110 CONTINUE Y( JY ) = Y( JY ) + ALPHA*TEMP2 JX = JX + INCX JY = JY + INCY 120 CONTINUE END IF END IF * RETURN * * End of DSYMV . * END SUBROUTINE DSYR ( UPLO, N, ALPHA, X, INCX, A, LDA ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA INTEGER INCX, LDA, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ) * .. * * Purpose * ======= * * DSYR performs the symmetric rank 1 operation * * A := alpha*x*x' + A, * * where alpha is a real scalar, x is an n element vector and A is an * n by n symmetric matrix. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the array A is to be referenced as * follows: * * UPLO = 'U' or 'u' Only the upper triangular part of A * is to be referenced. * * UPLO = 'L' or 'l' Only the lower triangular part of A * is to be referenced. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array A must contain the upper * triangular part of the symmetric matrix and the strictly * lower triangular part of A is not referenced. On exit, the * upper triangular part of the array A is overwritten by the * upper triangular part of the updated matrix. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array A must contain the lower * triangular part of the symmetric matrix and the strictly * upper triangular part of A is not referenced. On exit, the * lower triangular part of the array A is overwritten by the * lower triangular part of the updated matrix. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, n ). * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, KX * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( INCX.EQ.0 )THEN INFO = 5 ELSE IF( LDA.LT.MAX( 1, N ) )THEN INFO = 7 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSYR ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ALPHA.EQ.ZERO ) ) $ RETURN * * Set the start point in X if the increment is not unity. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through the triangular part * of A. * IF( LSAME( UPLO, 'U' ) )THEN * * Form A when A is stored in upper triangle. * IF( INCX.EQ.1 )THEN DO 20, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = ALPHA*X( J ) DO 10, I = 1, J A( I, J ) = A( I, J ) + X( I )*TEMP 10 CONTINUE END IF 20 CONTINUE ELSE JX = KX DO 40, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) IX = KX DO 30, I = 1, J A( I, J ) = A( I, J ) + X( IX )*TEMP IX = IX + INCX 30 CONTINUE END IF JX = JX + INCX 40 CONTINUE END IF ELSE * * Form A when A is stored in lower triangle. * IF( INCX.EQ.1 )THEN DO 60, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = ALPHA*X( J ) DO 50, I = J, N A( I, J ) = A( I, J ) + X( I )*TEMP 50 CONTINUE END IF 60 CONTINUE ELSE JX = KX DO 80, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = ALPHA*X( JX ) IX = JX DO 70, I = J, N A( I, J ) = A( I, J ) + X( IX )*TEMP IX = IX + INCX 70 CONTINUE END IF JX = JX + INCX 80 CONTINUE END IF END IF * RETURN * * End of DSYR . * END SUBROUTINE DSYR2 ( UPLO, N, ALPHA, X, INCX, Y, INCY, A, LDA ) * .. Scalar Arguments .. DOUBLE PRECISION ALPHA INTEGER INCX, INCY, LDA, N CHARACTER*1 UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ), Y( * ) * .. * * Purpose * ======= * * DSYR2 performs the symmetric rank 2 operation * * A := alpha*x*y' + alpha*y*x' + A, * * where alpha is a scalar, x and y are n element vectors and A is an n * by n symmetric matrix. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the array A is to be referenced as * follows: * * UPLO = 'U' or 'u' Only the upper triangular part of A * is to be referenced. * * UPLO = 'L' or 'l' Only the lower triangular part of A * is to be referenced. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. * Unchanged on exit. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * Y - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCY ) ). * Before entry, the incremented array Y must contain the n * element vector y. * Unchanged on exit. * * INCY - INTEGER. * On entry, INCY specifies the increment for the elements of * Y. INCY must not be zero. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array A must contain the upper * triangular part of the symmetric matrix and the strictly * lower triangular part of A is not referenced. On exit, the * upper triangular part of the array A is overwritten by the * upper triangular part of the updated matrix. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array A must contain the lower * triangular part of the symmetric matrix and the strictly * upper triangular part of A is not referenced. On exit, the * lower triangular part of the array A is overwritten by the * lower triangular part of the updated matrix. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, n ). * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP1, TEMP2 INTEGER I, INFO, IX, IY, J, JX, JY, KX, KY * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO, 'U' ).AND. $ .NOT.LSAME( UPLO, 'L' ) )THEN INFO = 1 ELSE IF( N.LT.0 )THEN INFO = 2 ELSE IF( INCX.EQ.0 )THEN INFO = 5 ELSE IF( INCY.EQ.0 )THEN INFO = 7 ELSE IF( LDA.LT.MAX( 1, N ) )THEN INFO = 9 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSYR2 ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR.( ALPHA.EQ.ZERO ) ) $ RETURN * * Set up the start points in X and Y if the increments are not both * unity. * IF( ( INCX.NE.1 ).OR.( INCY.NE.1 ) )THEN IF( INCX.GT.0 )THEN KX = 1 ELSE KX = 1 - ( N - 1 )*INCX END IF IF( INCY.GT.0 )THEN KY = 1 ELSE KY = 1 - ( N - 1 )*INCY END IF JX = KX JY = KY END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through the triangular part * of A. * IF( LSAME( UPLO, 'U' ) )THEN * * Form A when A is stored in the upper triangle. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 20, J = 1, N IF( ( X( J ).NE.ZERO ).OR.( Y( J ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( J ) TEMP2 = ALPHA*X( J ) DO 10, I = 1, J A( I, J ) = A( I, J ) + X( I )*TEMP1 + Y( I )*TEMP2 10 CONTINUE END IF 20 CONTINUE ELSE DO 40, J = 1, N IF( ( X( JX ).NE.ZERO ).OR.( Y( JY ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( JY ) TEMP2 = ALPHA*X( JX ) IX = KX IY = KY DO 30, I = 1, J A( I, J ) = A( I, J ) + X( IX )*TEMP1 $ + Y( IY )*TEMP2 IX = IX + INCX IY = IY + INCY 30 CONTINUE END IF JX = JX + INCX JY = JY + INCY 40 CONTINUE END IF ELSE * * Form A when A is stored in the lower triangle. * IF( ( INCX.EQ.1 ).AND.( INCY.EQ.1 ) )THEN DO 60, J = 1, N IF( ( X( J ).NE.ZERO ).OR.( Y( J ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( J ) TEMP2 = ALPHA*X( J ) DO 50, I = J, N A( I, J ) = A( I, J ) + X( I )*TEMP1 + Y( I )*TEMP2 50 CONTINUE END IF 60 CONTINUE ELSE DO 80, J = 1, N IF( ( X( JX ).NE.ZERO ).OR.( Y( JY ).NE.ZERO ) )THEN TEMP1 = ALPHA*Y( JY ) TEMP2 = ALPHA*X( JX ) IX = JX IY = JY DO 70, I = J, N A( I, J ) = A( I, J ) + X( IX )*TEMP1 $ + Y( IY )*TEMP2 IX = IX + INCX IY = IY + INCY 70 CONTINUE END IF JX = JX + INCX JY = JY + INCY 80 CONTINUE END IF END IF * RETURN * * End of DSYR2 . * END SUBROUTINE DSYR2K( UPLO, TRANS, N, K, ALPHA, A, LDA, B, LDB, $ BETA, C, LDC ) * .. Scalar Arguments .. CHARACTER*1 UPLO, TRANS INTEGER N, K, LDA, LDB, LDC DOUBLE PRECISION ALPHA, BETA * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), B( LDB, * ), C( LDC, * ) * .. * * Purpose * ======= * * DSYR2K performs one of the symmetric rank 2k operations * * C := alpha*A*B' + alpha*B*A' + beta*C, * * or * * C := alpha*A'*B + alpha*B'*A + beta*C, * * where alpha and beta are scalars, C is an n by n symmetric matrix * and A and B are n by k matrices in the first case and k by n * matrices in the second case. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the array C is to be referenced as * follows: * * UPLO = 'U' or 'u' Only the upper triangular part of C * is to be referenced. * * UPLO = 'L' or 'l' Only the lower triangular part of C * is to be referenced. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' C := alpha*A*B' + alpha*B*A' + * beta*C. * * TRANS = 'T' or 't' C := alpha*A'*B + alpha*B'*A + * beta*C. * * TRANS = 'C' or 'c' C := alpha*A'*B + alpha*B'*A + * beta*C. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix C. N must be * at least zero. * Unchanged on exit. * * K - INTEGER. * On entry with TRANS = 'N' or 'n', K specifies the number * of columns of the matrices A and B, and on entry with * TRANS = 'T' or 't' or 'C' or 'c', K specifies the number * of rows of the matrices A and B. K must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, ka ), where ka is * k when TRANS = 'N' or 'n', and is n otherwise. * Before entry with TRANS = 'N' or 'n', the leading n by k * part of the array A must contain the matrix A, otherwise * the leading k by n part of the array A must contain the * matrix A. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. When TRANS = 'N' or 'n' * then LDA must be at least max( 1, n ), otherwise LDA must * be at least max( 1, k ). * Unchanged on exit. * * B - DOUBLE PRECISION array of DIMENSION ( LDB, kb ), where kb is * k when TRANS = 'N' or 'n', and is n otherwise. * Before entry with TRANS = 'N' or 'n', the leading n by k * part of the array B must contain the matrix B, otherwise * the leading k by n part of the array B must contain the * matrix B. * Unchanged on exit. * * LDB - INTEGER. * On entry, LDB specifies the first dimension of B as declared * in the calling (sub) program. When TRANS = 'N' or 'n' * then LDB must be at least max( 1, n ), otherwise LDB must * be at least max( 1, k ). * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. * Unchanged on exit. * * C - DOUBLE PRECISION array of DIMENSION ( LDC, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array C must contain the upper * triangular part of the symmetric matrix and the strictly * lower triangular part of C is not referenced. On exit, the * upper triangular part of the array C is overwritten by the * upper triangular part of the updated matrix. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array C must contain the lower * triangular part of the symmetric matrix and the strictly * upper triangular part of C is not referenced. On exit, the * lower triangular part of the array C is overwritten by the * lower triangular part of the updated matrix. * * LDC - INTEGER. * On entry, LDC specifies the first dimension of C as declared * in the calling (sub) program. LDC must be at least * max( 1, n ). * Unchanged on exit. * * * Level 3 Blas routine. * * * -- Written on 8-February-1989. * Jack Dongarra, Argonne National Laboratory. * Iain Duff, AERE Harwell. * Jeremy Du Croz, Numerical Algorithms Group Ltd. * Sven Hammarling, Numerical Algorithms Group Ltd. * * * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. Local Scalars .. LOGICAL UPPER INTEGER I, INFO, J, L, NROWA DOUBLE PRECISION TEMP1, TEMP2 * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. * .. Executable Statements .. * * Test the input parameters. * IF( LSAME( TRANS, 'N' ) )THEN NROWA = N ELSE NROWA = K END IF UPPER = LSAME( UPLO, 'U' ) * INFO = 0 IF( ( .NOT.UPPER ).AND. $ ( .NOT.LSAME( UPLO , 'L' ) ) )THEN INFO = 1 ELSE IF( ( .NOT.LSAME( TRANS, 'N' ) ).AND. $ ( .NOT.LSAME( TRANS, 'T' ) ).AND. $ ( .NOT.LSAME( TRANS, 'C' ) ) )THEN INFO = 2 ELSE IF( N .LT.0 )THEN INFO = 3 ELSE IF( K .LT.0 )THEN INFO = 4 ELSE IF( LDA.LT.MAX( 1, NROWA ) )THEN INFO = 7 ELSE IF( LDB.LT.MAX( 1, NROWA ) )THEN INFO = 9 ELSE IF( LDC.LT.MAX( 1, N ) )THEN INFO = 12 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSYR2K', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR. $ ( ( ( ALPHA.EQ.ZERO ).OR.( K.EQ.0 ) ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * And when alpha.eq.zero. * IF( ALPHA.EQ.ZERO )THEN IF( UPPER )THEN IF( BETA.EQ.ZERO )THEN DO 20, J = 1, N DO 10, I = 1, J C( I, J ) = ZERO 10 CONTINUE 20 CONTINUE ELSE DO 40, J = 1, N DO 30, I = 1, J C( I, J ) = BETA*C( I, J ) 30 CONTINUE 40 CONTINUE END IF ELSE IF( BETA.EQ.ZERO )THEN DO 60, J = 1, N DO 50, I = J, N C( I, J ) = ZERO 50 CONTINUE 60 CONTINUE ELSE DO 80, J = 1, N DO 70, I = J, N C( I, J ) = BETA*C( I, J ) 70 CONTINUE 80 CONTINUE END IF END IF RETURN END IF * * Start the operations. * IF( LSAME( TRANS, 'N' ) )THEN * * Form C := alpha*A*B' + alpha*B*A' + C. * IF( UPPER )THEN DO 130, J = 1, N IF( BETA.EQ.ZERO )THEN DO 90, I = 1, J C( I, J ) = ZERO 90 CONTINUE ELSE IF( BETA.NE.ONE )THEN DO 100, I = 1, J C( I, J ) = BETA*C( I, J ) 100 CONTINUE END IF DO 120, L = 1, K IF( ( A( J, L ).NE.ZERO ).OR. $ ( B( J, L ).NE.ZERO ) )THEN TEMP1 = ALPHA*B( J, L ) TEMP2 = ALPHA*A( J, L ) DO 110, I = 1, J C( I, J ) = C( I, J ) + $ A( I, L )*TEMP1 + B( I, L )*TEMP2 110 CONTINUE END IF 120 CONTINUE 130 CONTINUE ELSE DO 180, J = 1, N IF( BETA.EQ.ZERO )THEN DO 140, I = J, N C( I, J ) = ZERO 140 CONTINUE ELSE IF( BETA.NE.ONE )THEN DO 150, I = J, N C( I, J ) = BETA*C( I, J ) 150 CONTINUE END IF DO 170, L = 1, K IF( ( A( J, L ).NE.ZERO ).OR. $ ( B( J, L ).NE.ZERO ) )THEN TEMP1 = ALPHA*B( J, L ) TEMP2 = ALPHA*A( J, L ) DO 160, I = J, N C( I, J ) = C( I, J ) + $ A( I, L )*TEMP1 + B( I, L )*TEMP2 160 CONTINUE END IF 170 CONTINUE 180 CONTINUE END IF ELSE * * Form C := alpha*A'*B + alpha*B'*A + C. * IF( UPPER )THEN DO 210, J = 1, N DO 200, I = 1, J TEMP1 = ZERO TEMP2 = ZERO DO 190, L = 1, K TEMP1 = TEMP1 + A( L, I )*B( L, J ) TEMP2 = TEMP2 + B( L, I )*A( L, J ) 190 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = ALPHA*TEMP1 + ALPHA*TEMP2 ELSE C( I, J ) = BETA *C( I, J ) + $ ALPHA*TEMP1 + ALPHA*TEMP2 END IF 200 CONTINUE 210 CONTINUE ELSE DO 240, J = 1, N DO 230, I = J, N TEMP1 = ZERO TEMP2 = ZERO DO 220, L = 1, K TEMP1 = TEMP1 + A( L, I )*B( L, J ) TEMP2 = TEMP2 + B( L, I )*A( L, J ) 220 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = ALPHA*TEMP1 + ALPHA*TEMP2 ELSE C( I, J ) = BETA *C( I, J ) + $ ALPHA*TEMP1 + ALPHA*TEMP2 END IF 230 CONTINUE 240 CONTINUE END IF END IF * RETURN * * End of DSYR2K. * END SUBROUTINE DSYRK ( UPLO, TRANS, N, K, ALPHA, A, LDA, $ BETA, C, LDC ) * .. Scalar Arguments .. CHARACTER*1 UPLO, TRANS INTEGER N, K, LDA, LDC DOUBLE PRECISION ALPHA, BETA * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), C( LDC, * ) * .. * * Purpose * ======= * * DSYRK performs one of the symmetric rank k operations * * C := alpha*A*A' + beta*C, * * or * * C := alpha*A'*A + beta*C, * * where alpha and beta are scalars, C is an n by n symmetric matrix * and A is an n by k matrix in the first case and a k by n matrix * in the second case. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the upper or lower * triangular part of the array C is to be referenced as * follows: * * UPLO = 'U' or 'u' Only the upper triangular part of C * is to be referenced. * * UPLO = 'L' or 'l' Only the lower triangular part of C * is to be referenced. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' C := alpha*A*A' + beta*C. * * TRANS = 'T' or 't' C := alpha*A'*A + beta*C. * * TRANS = 'C' or 'c' C := alpha*A'*A + beta*C. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix C. N must be * at least zero. * Unchanged on exit. * * K - INTEGER. * On entry with TRANS = 'N' or 'n', K specifies the number * of columns of the matrix A, and on entry with * TRANS = 'T' or 't' or 'C' or 'c', K specifies the number * of rows of the matrix A. K must be at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, ka ), where ka is * k when TRANS = 'N' or 'n', and is n otherwise. * Before entry with TRANS = 'N' or 'n', the leading n by k * part of the array A must contain the matrix A, otherwise * the leading k by n part of the array A must contain the * matrix A. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. When TRANS = 'N' or 'n' * then LDA must be at least max( 1, n ), otherwise LDA must * be at least max( 1, k ). * Unchanged on exit. * * BETA - DOUBLE PRECISION. * On entry, BETA specifies the scalar beta. * Unchanged on exit. * * C - DOUBLE PRECISION array of DIMENSION ( LDC, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array C must contain the upper * triangular part of the symmetric matrix and the strictly * lower triangular part of C is not referenced. On exit, the * upper triangular part of the array C is overwritten by the * upper triangular part of the updated matrix. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array C must contain the lower * triangular part of the symmetric matrix and the strictly * upper triangular part of C is not referenced. On exit, the * lower triangular part of the array C is overwritten by the * lower triangular part of the updated matrix. * * LDC - INTEGER. * On entry, LDC specifies the first dimension of C as declared * in the calling (sub) program. LDC must be at least * max( 1, n ). * Unchanged on exit. * * * Level 3 Blas routine. * * -- Written on 8-February-1989. * Jack Dongarra, Argonne National Laboratory. * Iain Duff, AERE Harwell. * Jeremy Du Croz, Numerical Algorithms Group Ltd. * Sven Hammarling, Numerical Algorithms Group Ltd. * * * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. Local Scalars .. LOGICAL UPPER INTEGER I, INFO, J, L, NROWA DOUBLE PRECISION TEMP * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. * .. Executable Statements .. * * Test the input parameters. * IF( LSAME( TRANS, 'N' ) )THEN NROWA = N ELSE NROWA = K END IF UPPER = LSAME( UPLO, 'U' ) * INFO = 0 IF( ( .NOT.UPPER ).AND. $ ( .NOT.LSAME( UPLO , 'L' ) ) )THEN INFO = 1 ELSE IF( ( .NOT.LSAME( TRANS, 'N' ) ).AND. $ ( .NOT.LSAME( TRANS, 'T' ) ).AND. $ ( .NOT.LSAME( TRANS, 'C' ) ) )THEN INFO = 2 ELSE IF( N .LT.0 )THEN INFO = 3 ELSE IF( K .LT.0 )THEN INFO = 4 ELSE IF( LDA.LT.MAX( 1, NROWA ) )THEN INFO = 7 ELSE IF( LDC.LT.MAX( 1, N ) )THEN INFO = 10 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DSYRK ', INFO ) RETURN END IF * * Quick return if possible. * IF( ( N.EQ.0 ).OR. $ ( ( ( ALPHA.EQ.ZERO ).OR.( K.EQ.0 ) ).AND.( BETA.EQ.ONE ) ) ) $ RETURN * * And when alpha.eq.zero. * IF( ALPHA.EQ.ZERO )THEN IF( UPPER )THEN IF( BETA.EQ.ZERO )THEN DO 20, J = 1, N DO 10, I = 1, J C( I, J ) = ZERO 10 CONTINUE 20 CONTINUE ELSE DO 40, J = 1, N DO 30, I = 1, J C( I, J ) = BETA*C( I, J ) 30 CONTINUE 40 CONTINUE END IF ELSE IF( BETA.EQ.ZERO )THEN DO 60, J = 1, N DO 50, I = J, N C( I, J ) = ZERO 50 CONTINUE 60 CONTINUE ELSE DO 80, J = 1, N DO 70, I = J, N C( I, J ) = BETA*C( I, J ) 70 CONTINUE 80 CONTINUE END IF END IF RETURN END IF * * Start the operations. * IF( LSAME( TRANS, 'N' ) )THEN * * Form C := alpha*A*A' + beta*C. * IF( UPPER )THEN DO 130, J = 1, N IF( BETA.EQ.ZERO )THEN DO 90, I = 1, J C( I, J ) = ZERO 90 CONTINUE ELSE IF( BETA.NE.ONE )THEN DO 100, I = 1, J C( I, J ) = BETA*C( I, J ) 100 CONTINUE END IF DO 120, L = 1, K IF( A( J, L ).NE.ZERO )THEN TEMP = ALPHA*A( J, L ) DO 110, I = 1, J C( I, J ) = C( I, J ) + TEMP*A( I, L ) 110 CONTINUE END IF 120 CONTINUE 130 CONTINUE ELSE DO 180, J = 1, N IF( BETA.EQ.ZERO )THEN DO 140, I = J, N C( I, J ) = ZERO 140 CONTINUE ELSE IF( BETA.NE.ONE )THEN DO 150, I = J, N C( I, J ) = BETA*C( I, J ) 150 CONTINUE END IF DO 170, L = 1, K IF( A( J, L ).NE.ZERO )THEN TEMP = ALPHA*A( J, L ) DO 160, I = J, N C( I, J ) = C( I, J ) + TEMP*A( I, L ) 160 CONTINUE END IF 170 CONTINUE 180 CONTINUE END IF ELSE * * Form C := alpha*A'*A + beta*C. * IF( UPPER )THEN DO 210, J = 1, N DO 200, I = 1, J TEMP = ZERO DO 190, L = 1, K TEMP = TEMP + A( L, I )*A( L, J ) 190 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = ALPHA*TEMP ELSE C( I, J ) = ALPHA*TEMP + BETA*C( I, J ) END IF 200 CONTINUE 210 CONTINUE ELSE DO 240, J = 1, N DO 230, I = J, N TEMP = ZERO DO 220, L = 1, K TEMP = TEMP + A( L, I )*A( L, J ) 220 CONTINUE IF( BETA.EQ.ZERO )THEN C( I, J ) = ALPHA*TEMP ELSE C( I, J ) = ALPHA*TEMP + BETA*C( I, J ) END IF 230 CONTINUE 240 CONTINUE END IF END IF * RETURN * * End of DSYRK . * END SUBROUTINE DTBMV ( UPLO, TRANS, DIAG, N, K, A, LDA, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, K, LDA, N CHARACTER*1 DIAG, TRANS, UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ) * .. * * Purpose * ======= * * DTBMV performs one of the matrix-vector operations * * x := A*x, or x := A'*x, * * where x is an n element vector and A is an n by n unit, or non-unit, * upper or lower triangular band matrix, with ( k + 1 ) diagonals. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' x := A*x. * * TRANS = 'T' or 't' x := A'*x. * * TRANS = 'C' or 'c' x := A'*x. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit * triangular as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * K - INTEGER. * On entry with UPLO = 'U' or 'u', K specifies the number of * super-diagonals of the matrix A. * On entry with UPLO = 'L' or 'l', K specifies the number of * sub-diagonals of the matrix A. * K must satisfy 0 .le. K. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading ( k + 1 ) * by n part of the array A must contain the upper triangular * band part of the matrix of coefficients, supplied column by * column, with the leading diagonal of the matrix in row * ( k + 1 ) of the array, the first super-diagonal starting at * position 2 in row k, and so on. The top left k by k triangle * of the array A is not referenced. * The following program segment will transfer an upper * triangular band matrix from conventional full matrix storage * to band storage: * * DO 20, J = 1, N * M = K + 1 - J * DO 10, I = MAX( 1, J - K ), J * A( M + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Before entry with UPLO = 'L' or 'l', the leading ( k + 1 ) * by n part of the array A must contain the lower triangular * band part of the matrix of coefficients, supplied column by * column, with the leading diagonal of the matrix in row 1 of * the array, the first sub-diagonal starting at position 1 in * row 2, and so on. The bottom right k by k triangle of the * array A is not referenced. * The following program segment will transfer a lower * triangular band matrix from conventional full matrix storage * to band storage: * * DO 20, J = 1, N * M = 1 - J * DO 10, I = J, MIN( N, J + K ) * A( M + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Note that when DIAG = 'U' or 'u' the elements of the array A * corresponding to the diagonal elements of the matrix are not * referenced, but are assumed to be unity. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * ( k + 1 ). * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. On exit, X is overwritten with the * tranformed vector x. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, KPLUS1, KX, L LOGICAL NOUNIT * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX, MIN * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO , 'U' ).AND. $ .NOT.LSAME( UPLO , 'L' ) )THEN INFO = 1 ELSE IF( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 2 ELSE IF( .NOT.LSAME( DIAG , 'U' ).AND. $ .NOT.LSAME( DIAG , 'N' ) )THEN INFO = 3 ELSE IF( N.LT.0 )THEN INFO = 4 ELSE IF( K.LT.0 )THEN INFO = 5 ELSE IF( LDA.LT.( K + 1 ) )THEN INFO = 7 ELSE IF( INCX.EQ.0 )THEN INFO = 9 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTBMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * NOUNIT = LSAME( DIAG, 'N' ) * * Set up the start point in X if the increment is not unity. This * will be ( N - 1 )*INCX too small for descending loops. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through A. * IF( LSAME( TRANS, 'N' ) )THEN * * Form x := A*x. * IF( LSAME( UPLO, 'U' ) )THEN KPLUS1 = K + 1 IF( INCX.EQ.1 )THEN DO 20, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = X( J ) L = KPLUS1 - J DO 10, I = MAX( 1, J - K ), J - 1 X( I ) = X( I ) + TEMP*A( L + I, J ) 10 CONTINUE IF( NOUNIT ) $ X( J ) = X( J )*A( KPLUS1, J ) END IF 20 CONTINUE ELSE JX = KX DO 40, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = X( JX ) IX = KX L = KPLUS1 - J DO 30, I = MAX( 1, J - K ), J - 1 X( IX ) = X( IX ) + TEMP*A( L + I, J ) IX = IX + INCX 30 CONTINUE IF( NOUNIT ) $ X( JX ) = X( JX )*A( KPLUS1, J ) END IF JX = JX + INCX IF( J.GT.K ) $ KX = KX + INCX 40 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 60, J = N, 1, -1 IF( X( J ).NE.ZERO )THEN TEMP = X( J ) L = 1 - J DO 50, I = MIN( N, J + K ), J + 1, -1 X( I ) = X( I ) + TEMP*A( L + I, J ) 50 CONTINUE IF( NOUNIT ) $ X( J ) = X( J )*A( 1, J ) END IF 60 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 80, J = N, 1, -1 IF( X( JX ).NE.ZERO )THEN TEMP = X( JX ) IX = KX L = 1 - J DO 70, I = MIN( N, J + K ), J + 1, -1 X( IX ) = X( IX ) + TEMP*A( L + I, J ) IX = IX - INCX 70 CONTINUE IF( NOUNIT ) $ X( JX ) = X( JX )*A( 1, J ) END IF JX = JX - INCX IF( ( N - J ).GE.K ) $ KX = KX - INCX 80 CONTINUE END IF END IF ELSE * * Form x := A'*x. * IF( LSAME( UPLO, 'U' ) )THEN KPLUS1 = K + 1 IF( INCX.EQ.1 )THEN DO 100, J = N, 1, -1 TEMP = X( J ) L = KPLUS1 - J IF( NOUNIT ) $ TEMP = TEMP*A( KPLUS1, J ) DO 90, I = J - 1, MAX( 1, J - K ), -1 TEMP = TEMP + A( L + I, J )*X( I ) 90 CONTINUE X( J ) = TEMP 100 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 120, J = N, 1, -1 TEMP = X( JX ) KX = KX - INCX IX = KX L = KPLUS1 - J IF( NOUNIT ) $ TEMP = TEMP*A( KPLUS1, J ) DO 110, I = J - 1, MAX( 1, J - K ), -1 TEMP = TEMP + A( L + I, J )*X( IX ) IX = IX - INCX 110 CONTINUE X( JX ) = TEMP JX = JX - INCX 120 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 140, J = 1, N TEMP = X( J ) L = 1 - J IF( NOUNIT ) $ TEMP = TEMP*A( 1, J ) DO 130, I = J + 1, MIN( N, J + K ) TEMP = TEMP + A( L + I, J )*X( I ) 130 CONTINUE X( J ) = TEMP 140 CONTINUE ELSE JX = KX DO 160, J = 1, N TEMP = X( JX ) KX = KX + INCX IX = KX L = 1 - J IF( NOUNIT ) $ TEMP = TEMP*A( 1, J ) DO 150, I = J + 1, MIN( N, J + K ) TEMP = TEMP + A( L + I, J )*X( IX ) IX = IX + INCX 150 CONTINUE X( JX ) = TEMP JX = JX + INCX 160 CONTINUE END IF END IF END IF * RETURN * * End of DTBMV . * END SUBROUTINE DTBSV ( UPLO, TRANS, DIAG, N, K, A, LDA, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, K, LDA, N CHARACTER*1 DIAG, TRANS, UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ) * .. * * Purpose * ======= * * DTBSV solves one of the systems of equations * * A*x = b, or A'*x = b, * * where b and x are n element vectors and A is an n by n unit, or * non-unit, upper or lower triangular band matrix, with ( k + 1 ) * diagonals. * * No test for singularity or near-singularity is included in this * routine. Such tests must be performed before calling this routine. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the equations to be solved as * follows: * * TRANS = 'N' or 'n' A*x = b. * * TRANS = 'T' or 't' A'*x = b. * * TRANS = 'C' or 'c' A'*x = b. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit * triangular as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * K - INTEGER. * On entry with UPLO = 'U' or 'u', K specifies the number of * super-diagonals of the matrix A. * On entry with UPLO = 'L' or 'l', K specifies the number of * sub-diagonals of the matrix A. * K must satisfy 0 .le. K. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading ( k + 1 ) * by n part of the array A must contain the upper triangular * band part of the matrix of coefficients, supplied column by * column, with the leading diagonal of the matrix in row * ( k + 1 ) of the array, the first super-diagonal starting at * position 2 in row k, and so on. The top left k by k triangle * of the array A is not referenced. * The following program segment will transfer an upper * triangular band matrix from conventional full matrix storage * to band storage: * * DO 20, J = 1, N * M = K + 1 - J * DO 10, I = MAX( 1, J - K ), J * A( M + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Before entry with UPLO = 'L' or 'l', the leading ( k + 1 ) * by n part of the array A must contain the lower triangular * band part of the matrix of coefficients, supplied column by * column, with the leading diagonal of the matrix in row 1 of * the array, the first sub-diagonal starting at position 1 in * row 2, and so on. The bottom right k by k triangle of the * array A is not referenced. * The following program segment will transfer a lower * triangular band matrix from conventional full matrix storage * to band storage: * * DO 20, J = 1, N * M = 1 - J * DO 10, I = J, MIN( N, J + K ) * A( M + I, J ) = matrix( I, J ) * 10 CONTINUE * 20 CONTINUE * * Note that when DIAG = 'U' or 'u' the elements of the array A * corresponding to the diagonal elements of the matrix are not * referenced, but are assumed to be unity. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * ( k + 1 ). * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element right-hand side vector b. On exit, X is overwritten * with the solution vector x. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, KPLUS1, KX, L LOGICAL NOUNIT * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX, MIN * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO , 'U' ).AND. $ .NOT.LSAME( UPLO , 'L' ) )THEN INFO = 1 ELSE IF( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 2 ELSE IF( .NOT.LSAME( DIAG , 'U' ).AND. $ .NOT.LSAME( DIAG , 'N' ) )THEN INFO = 3 ELSE IF( N.LT.0 )THEN INFO = 4 ELSE IF( K.LT.0 )THEN INFO = 5 ELSE IF( LDA.LT.( K + 1 ) )THEN INFO = 7 ELSE IF( INCX.EQ.0 )THEN INFO = 9 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTBSV ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * NOUNIT = LSAME( DIAG, 'N' ) * * Set up the start point in X if the increment is not unity. This * will be ( N - 1 )*INCX too small for descending loops. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of A are * accessed by sequentially with one pass through A. * IF( LSAME( TRANS, 'N' ) )THEN * * Form x := inv( A )*x. * IF( LSAME( UPLO, 'U' ) )THEN KPLUS1 = K + 1 IF( INCX.EQ.1 )THEN DO 20, J = N, 1, -1 IF( X( J ).NE.ZERO )THEN L = KPLUS1 - J IF( NOUNIT ) $ X( J ) = X( J )/A( KPLUS1, J ) TEMP = X( J ) DO 10, I = J - 1, MAX( 1, J - K ), -1 X( I ) = X( I ) - TEMP*A( L + I, J ) 10 CONTINUE END IF 20 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 40, J = N, 1, -1 KX = KX - INCX IF( X( JX ).NE.ZERO )THEN IX = KX L = KPLUS1 - J IF( NOUNIT ) $ X( JX ) = X( JX )/A( KPLUS1, J ) TEMP = X( JX ) DO 30, I = J - 1, MAX( 1, J - K ), -1 X( IX ) = X( IX ) - TEMP*A( L + I, J ) IX = IX - INCX 30 CONTINUE END IF JX = JX - INCX 40 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 60, J = 1, N IF( X( J ).NE.ZERO )THEN L = 1 - J IF( NOUNIT ) $ X( J ) = X( J )/A( 1, J ) TEMP = X( J ) DO 50, I = J + 1, MIN( N, J + K ) X( I ) = X( I ) - TEMP*A( L + I, J ) 50 CONTINUE END IF 60 CONTINUE ELSE JX = KX DO 80, J = 1, N KX = KX + INCX IF( X( JX ).NE.ZERO )THEN IX = KX L = 1 - J IF( NOUNIT ) $ X( JX ) = X( JX )/A( 1, J ) TEMP = X( JX ) DO 70, I = J + 1, MIN( N, J + K ) X( IX ) = X( IX ) - TEMP*A( L + I, J ) IX = IX + INCX 70 CONTINUE END IF JX = JX + INCX 80 CONTINUE END IF END IF ELSE * * Form x := inv( A')*x. * IF( LSAME( UPLO, 'U' ) )THEN KPLUS1 = K + 1 IF( INCX.EQ.1 )THEN DO 100, J = 1, N TEMP = X( J ) L = KPLUS1 - J DO 90, I = MAX( 1, J - K ), J - 1 TEMP = TEMP - A( L + I, J )*X( I ) 90 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( KPLUS1, J ) X( J ) = TEMP 100 CONTINUE ELSE JX = KX DO 120, J = 1, N TEMP = X( JX ) IX = KX L = KPLUS1 - J DO 110, I = MAX( 1, J - K ), J - 1 TEMP = TEMP - A( L + I, J )*X( IX ) IX = IX + INCX 110 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( KPLUS1, J ) X( JX ) = TEMP JX = JX + INCX IF( J.GT.K ) $ KX = KX + INCX 120 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 140, J = N, 1, -1 TEMP = X( J ) L = 1 - J DO 130, I = MIN( N, J + K ), J + 1, -1 TEMP = TEMP - A( L + I, J )*X( I ) 130 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( 1, J ) X( J ) = TEMP 140 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 160, J = N, 1, -1 TEMP = X( JX ) IX = KX L = 1 - J DO 150, I = MIN( N, J + K ), J + 1, -1 TEMP = TEMP - A( L + I, J )*X( IX ) IX = IX - INCX 150 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( 1, J ) X( JX ) = TEMP JX = JX - INCX IF( ( N - J ).GE.K ) $ KX = KX - INCX 160 CONTINUE END IF END IF END IF * RETURN * * End of DTBSV . * END SUBROUTINE DTPMV ( UPLO, TRANS, DIAG, N, AP, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, N CHARACTER*1 DIAG, TRANS, UPLO * .. Array Arguments .. DOUBLE PRECISION AP( * ), X( * ) * .. * * Purpose * ======= * * DTPMV performs one of the matrix-vector operations * * x := A*x, or x := A'*x, * * where x is an n element vector and A is an n by n unit, or non-unit, * upper or lower triangular matrix, supplied in packed form. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' x := A*x. * * TRANS = 'T' or 't' x := A'*x. * * TRANS = 'C' or 'c' x := A'*x. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit * triangular as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * AP - DOUBLE PRECISION array of DIMENSION at least * ( ( n*( n + 1 ) )/2 ). * Before entry with UPLO = 'U' or 'u', the array AP must * contain the upper triangular matrix packed sequentially, * column by column, so that AP( 1 ) contains a( 1, 1 ), * AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) * respectively, and so on. * Before entry with UPLO = 'L' or 'l', the array AP must * contain the lower triangular matrix packed sequentially, * column by column, so that AP( 1 ) contains a( 1, 1 ), * AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) * respectively, and so on. * Note that when DIAG = 'U' or 'u', the diagonal elements of * A are not referenced, but are assumed to be unity. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. On exit, X is overwritten with the * tranformed vector x. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, K, KK, KX LOGICAL NOUNIT * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO , 'U' ).AND. $ .NOT.LSAME( UPLO , 'L' ) )THEN INFO = 1 ELSE IF( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 2 ELSE IF( .NOT.LSAME( DIAG , 'U' ).AND. $ .NOT.LSAME( DIAG , 'N' ) )THEN INFO = 3 ELSE IF( N.LT.0 )THEN INFO = 4 ELSE IF( INCX.EQ.0 )THEN INFO = 7 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTPMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * NOUNIT = LSAME( DIAG, 'N' ) * * Set up the start point in X if the increment is not unity. This * will be ( N - 1 )*INCX too small for descending loops. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of AP are * accessed sequentially with one pass through AP. * IF( LSAME( TRANS, 'N' ) )THEN * * Form x:= A*x. * IF( LSAME( UPLO, 'U' ) )THEN KK =1 IF( INCX.EQ.1 )THEN DO 20, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = X( J ) K = KK DO 10, I = 1, J - 1 X( I ) = X( I ) + TEMP*AP( K ) K = K + 1 10 CONTINUE IF( NOUNIT ) $ X( J ) = X( J )*AP( KK + J - 1 ) END IF KK = KK + J 20 CONTINUE ELSE JX = KX DO 40, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = X( JX ) IX = KX DO 30, K = KK, KK + J - 2 X( IX ) = X( IX ) + TEMP*AP( K ) IX = IX + INCX 30 CONTINUE IF( NOUNIT ) $ X( JX ) = X( JX )*AP( KK + J - 1 ) END IF JX = JX + INCX KK = KK + J 40 CONTINUE END IF ELSE KK = ( N*( N + 1 ) )/2 IF( INCX.EQ.1 )THEN DO 60, J = N, 1, -1 IF( X( J ).NE.ZERO )THEN TEMP = X( J ) K = KK DO 50, I = N, J + 1, -1 X( I ) = X( I ) + TEMP*AP( K ) K = K - 1 50 CONTINUE IF( NOUNIT ) $ X( J ) = X( J )*AP( KK - N + J ) END IF KK = KK - ( N - J + 1 ) 60 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 80, J = N, 1, -1 IF( X( JX ).NE.ZERO )THEN TEMP = X( JX ) IX = KX DO 70, K = KK, KK - ( N - ( J + 1 ) ), -1 X( IX ) = X( IX ) + TEMP*AP( K ) IX = IX - INCX 70 CONTINUE IF( NOUNIT ) $ X( JX ) = X( JX )*AP( KK - N + J ) END IF JX = JX - INCX KK = KK - ( N - J + 1 ) 80 CONTINUE END IF END IF ELSE * * Form x := A'*x. * IF( LSAME( UPLO, 'U' ) )THEN KK = ( N*( N + 1 ) )/2 IF( INCX.EQ.1 )THEN DO 100, J = N, 1, -1 TEMP = X( J ) IF( NOUNIT ) $ TEMP = TEMP*AP( KK ) K = KK - 1 DO 90, I = J - 1, 1, -1 TEMP = TEMP + AP( K )*X( I ) K = K - 1 90 CONTINUE X( J ) = TEMP KK = KK - J 100 CONTINUE ELSE JX = KX + ( N - 1 )*INCX DO 120, J = N, 1, -1 TEMP = X( JX ) IX = JX IF( NOUNIT ) $ TEMP = TEMP*AP( KK ) DO 110, K = KK - 1, KK - J + 1, -1 IX = IX - INCX TEMP = TEMP + AP( K )*X( IX ) 110 CONTINUE X( JX ) = TEMP JX = JX - INCX KK = KK - J 120 CONTINUE END IF ELSE KK = 1 IF( INCX.EQ.1 )THEN DO 140, J = 1, N TEMP = X( J ) IF( NOUNIT ) $ TEMP = TEMP*AP( KK ) K = KK + 1 DO 130, I = J + 1, N TEMP = TEMP + AP( K )*X( I ) K = K + 1 130 CONTINUE X( J ) = TEMP KK = KK + ( N - J + 1 ) 140 CONTINUE ELSE JX = KX DO 160, J = 1, N TEMP = X( JX ) IX = JX IF( NOUNIT ) $ TEMP = TEMP*AP( KK ) DO 150, K = KK + 1, KK + N - J IX = IX + INCX TEMP = TEMP + AP( K )*X( IX ) 150 CONTINUE X( JX ) = TEMP JX = JX + INCX KK = KK + ( N - J + 1 ) 160 CONTINUE END IF END IF END IF * RETURN * * End of DTPMV . * END SUBROUTINE DTPSV ( UPLO, TRANS, DIAG, N, AP, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, N CHARACTER*1 DIAG, TRANS, UPLO * .. Array Arguments .. DOUBLE PRECISION AP( * ), X( * ) * .. * * Purpose * ======= * * DTPSV solves one of the systems of equations * * A*x = b, or A'*x = b, * * where b and x are n element vectors and A is an n by n unit, or * non-unit, upper or lower triangular matrix, supplied in packed form. * * No test for singularity or near-singularity is included in this * routine. Such tests must be performed before calling this routine. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the equations to be solved as * follows: * * TRANS = 'N' or 'n' A*x = b. * * TRANS = 'T' or 't' A'*x = b. * * TRANS = 'C' or 'c' A'*x = b. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit * triangular as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * AP - DOUBLE PRECISION array of DIMENSION at least * ( ( n*( n + 1 ) )/2 ). * Before entry with UPLO = 'U' or 'u', the array AP must * contain the upper triangular matrix packed sequentially, * column by column, so that AP( 1 ) contains a( 1, 1 ), * AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 ) * respectively, and so on. * Before entry with UPLO = 'L' or 'l', the array AP must * contain the lower triangular matrix packed sequentially, * column by column, so that AP( 1 ) contains a( 1, 1 ), * AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 ) * respectively, and so on. * Note that when DIAG = 'U' or 'u', the diagonal elements of * A are not referenced, but are assumed to be unity. * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element right-hand side vector b. On exit, X is overwritten * with the solution vector x. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, K, KK, KX LOGICAL NOUNIT * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO , 'U' ).AND. $ .NOT.LSAME( UPLO , 'L' ) )THEN INFO = 1 ELSE IF( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 2 ELSE IF( .NOT.LSAME( DIAG , 'U' ).AND. $ .NOT.LSAME( DIAG , 'N' ) )THEN INFO = 3 ELSE IF( N.LT.0 )THEN INFO = 4 ELSE IF( INCX.EQ.0 )THEN INFO = 7 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTPSV ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * NOUNIT = LSAME( DIAG, 'N' ) * * Set up the start point in X if the increment is not unity. This * will be ( N - 1 )*INCX too small for descending loops. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of AP are * accessed sequentially with one pass through AP. * IF( LSAME( TRANS, 'N' ) )THEN * * Form x := inv( A )*x. * IF( LSAME( UPLO, 'U' ) )THEN KK = ( N*( N + 1 ) )/2 IF( INCX.EQ.1 )THEN DO 20, J = N, 1, -1 IF( X( J ).NE.ZERO )THEN IF( NOUNIT ) $ X( J ) = X( J )/AP( KK ) TEMP = X( J ) K = KK - 1 DO 10, I = J - 1, 1, -1 X( I ) = X( I ) - TEMP*AP( K ) K = K - 1 10 CONTINUE END IF KK = KK - J 20 CONTINUE ELSE JX = KX + ( N - 1 )*INCX DO 40, J = N, 1, -1 IF( X( JX ).NE.ZERO )THEN IF( NOUNIT ) $ X( JX ) = X( JX )/AP( KK ) TEMP = X( JX ) IX = JX DO 30, K = KK - 1, KK - J + 1, -1 IX = IX - INCX X( IX ) = X( IX ) - TEMP*AP( K ) 30 CONTINUE END IF JX = JX - INCX KK = KK - J 40 CONTINUE END IF ELSE KK = 1 IF( INCX.EQ.1 )THEN DO 60, J = 1, N IF( X( J ).NE.ZERO )THEN IF( NOUNIT ) $ X( J ) = X( J )/AP( KK ) TEMP = X( J ) K = KK + 1 DO 50, I = J + 1, N X( I ) = X( I ) - TEMP*AP( K ) K = K + 1 50 CONTINUE END IF KK = KK + ( N - J + 1 ) 60 CONTINUE ELSE JX = KX DO 80, J = 1, N IF( X( JX ).NE.ZERO )THEN IF( NOUNIT ) $ X( JX ) = X( JX )/AP( KK ) TEMP = X( JX ) IX = JX DO 70, K = KK + 1, KK + N - J IX = IX + INCX X( IX ) = X( IX ) - TEMP*AP( K ) 70 CONTINUE END IF JX = JX + INCX KK = KK + ( N - J + 1 ) 80 CONTINUE END IF END IF ELSE * * Form x := inv( A' )*x. * IF( LSAME( UPLO, 'U' ) )THEN KK = 1 IF( INCX.EQ.1 )THEN DO 100, J = 1, N TEMP = X( J ) K = KK DO 90, I = 1, J - 1 TEMP = TEMP - AP( K )*X( I ) K = K + 1 90 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/AP( KK + J - 1 ) X( J ) = TEMP KK = KK + J 100 CONTINUE ELSE JX = KX DO 120, J = 1, N TEMP = X( JX ) IX = KX DO 110, K = KK, KK + J - 2 TEMP = TEMP - AP( K )*X( IX ) IX = IX + INCX 110 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/AP( KK + J - 1 ) X( JX ) = TEMP JX = JX + INCX KK = KK + J 120 CONTINUE END IF ELSE KK = ( N*( N + 1 ) )/2 IF( INCX.EQ.1 )THEN DO 140, J = N, 1, -1 TEMP = X( J ) K = KK DO 130, I = N, J + 1, -1 TEMP = TEMP - AP( K )*X( I ) K = K - 1 130 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/AP( KK - N + J ) X( J ) = TEMP KK = KK - ( N - J + 1 ) 140 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 160, J = N, 1, -1 TEMP = X( JX ) IX = KX DO 150, K = KK, KK - ( N - ( J + 1 ) ), -1 TEMP = TEMP - AP( K )*X( IX ) IX = IX - INCX 150 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/AP( KK - N + J ) X( JX ) = TEMP JX = JX - INCX KK = KK - (N - J + 1 ) 160 CONTINUE END IF END IF END IF * RETURN * * End of DTPSV . * END SUBROUTINE DTRMM ( SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, $ B, LDB ) * .. Scalar Arguments .. CHARACTER*1 SIDE, UPLO, TRANSA, DIAG INTEGER M, N, LDA, LDB DOUBLE PRECISION ALPHA * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), B( LDB, * ) * .. * * Purpose * ======= * * DTRMM performs one of the matrix-matrix operations * * B := alpha*op( A )*B, or B := alpha*B*op( A ), * * where alpha is a scalar, B is an m by n matrix, A is a unit, or * non-unit, upper or lower triangular matrix and op( A ) is one of * * op( A ) = A or op( A ) = A'. * * Parameters * ========== * * SIDE - CHARACTER*1. * On entry, SIDE specifies whether op( A ) multiplies B from * the left or right as follows: * * SIDE = 'L' or 'l' B := alpha*op( A )*B. * * SIDE = 'R' or 'r' B := alpha*B*op( A ). * * Unchanged on exit. * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix A is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANSA - CHARACTER*1. * On entry, TRANSA specifies the form of op( A ) to be used in * the matrix multiplication as follows: * * TRANSA = 'N' or 'n' op( A ) = A. * * TRANSA = 'T' or 't' op( A ) = A'. * * TRANSA = 'C' or 'c' op( A ) = A'. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit triangular * as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * M - INTEGER. * On entry, M specifies the number of rows of B. M must be at * least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of B. N must be * at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. When alpha is * zero then A is not referenced and B need not be set before * entry. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, k ), where k is m * when SIDE = 'L' or 'l' and is n when SIDE = 'R' or 'r'. * Before entry with UPLO = 'U' or 'u', the leading k by k * upper triangular part of the array A must contain the upper * triangular matrix and the strictly lower triangular part of * A is not referenced. * Before entry with UPLO = 'L' or 'l', the leading k by k * lower triangular part of the array A must contain the lower * triangular matrix and the strictly upper triangular part of * A is not referenced. * Note that when DIAG = 'U' or 'u', the diagonal elements of * A are not referenced either, but are assumed to be unity. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. When SIDE = 'L' or 'l' then * LDA must be at least max( 1, m ), when SIDE = 'R' or 'r' * then LDA must be at least max( 1, n ). * Unchanged on exit. * * B - DOUBLE PRECISION array of DIMENSION ( LDB, n ). * Before entry, the leading m by n part of the array B must * contain the matrix B, and on exit is overwritten by the * transformed matrix. * * LDB - INTEGER. * On entry, LDB specifies the first dimension of B as declared * in the calling (sub) program. LDB must be at least * max( 1, m ). * Unchanged on exit. * * * Level 3 Blas routine. * * -- Written on 8-February-1989. * Jack Dongarra, Argonne National Laboratory. * Iain Duff, AERE Harwell. * Jeremy Du Croz, Numerical Algorithms Group Ltd. * Sven Hammarling, Numerical Algorithms Group Ltd. * * * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. Local Scalars .. LOGICAL LSIDE, NOUNIT, UPPER INTEGER I, INFO, J, K, NROWA DOUBLE PRECISION TEMP * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. * .. Executable Statements .. * * Test the input parameters. * LSIDE = LSAME( SIDE , 'L' ) IF( LSIDE )THEN NROWA = M ELSE NROWA = N END IF NOUNIT = LSAME( DIAG , 'N' ) UPPER = LSAME( UPLO , 'U' ) * INFO = 0 IF( ( .NOT.LSIDE ).AND. $ ( .NOT.LSAME( SIDE , 'R' ) ) )THEN INFO = 1 ELSE IF( ( .NOT.UPPER ).AND. $ ( .NOT.LSAME( UPLO , 'L' ) ) )THEN INFO = 2 ELSE IF( ( .NOT.LSAME( TRANSA, 'N' ) ).AND. $ ( .NOT.LSAME( TRANSA, 'T' ) ).AND. $ ( .NOT.LSAME( TRANSA, 'C' ) ) )THEN INFO = 3 ELSE IF( ( .NOT.LSAME( DIAG , 'U' ) ).AND. $ ( .NOT.LSAME( DIAG , 'N' ) ) )THEN INFO = 4 ELSE IF( M .LT.0 )THEN INFO = 5 ELSE IF( N .LT.0 )THEN INFO = 6 ELSE IF( LDA.LT.MAX( 1, NROWA ) )THEN INFO = 9 ELSE IF( LDB.LT.MAX( 1, M ) )THEN INFO = 11 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTRMM ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * * And when alpha.eq.zero. * IF( ALPHA.EQ.ZERO )THEN DO 20, J = 1, N DO 10, I = 1, M B( I, J ) = ZERO 10 CONTINUE 20 CONTINUE RETURN END IF * * Start the operations. * IF( LSIDE )THEN IF( LSAME( TRANSA, 'N' ) )THEN * * Form B := alpha*A*B. * IF( UPPER )THEN DO 50, J = 1, N DO 40, K = 1, M IF( B( K, J ).NE.ZERO )THEN TEMP = ALPHA*B( K, J ) DO 30, I = 1, K - 1 B( I, J ) = B( I, J ) + TEMP*A( I, K ) 30 CONTINUE IF( NOUNIT ) $ TEMP = TEMP*A( K, K ) B( K, J ) = TEMP END IF 40 CONTINUE 50 CONTINUE ELSE DO 80, J = 1, N DO 70 K = M, 1, -1 IF( B( K, J ).NE.ZERO )THEN TEMP = ALPHA*B( K, J ) B( K, J ) = TEMP IF( NOUNIT ) $ B( K, J ) = B( K, J )*A( K, K ) DO 60, I = K + 1, M B( I, J ) = B( I, J ) + TEMP*A( I, K ) 60 CONTINUE END IF 70 CONTINUE 80 CONTINUE END IF ELSE * * Form B := alpha*A'*B. * IF( UPPER )THEN DO 110, J = 1, N DO 100, I = M, 1, -1 TEMP = B( I, J ) IF( NOUNIT ) $ TEMP = TEMP*A( I, I ) DO 90, K = 1, I - 1 TEMP = TEMP + A( K, I )*B( K, J ) 90 CONTINUE B( I, J ) = ALPHA*TEMP 100 CONTINUE 110 CONTINUE ELSE DO 140, J = 1, N DO 130, I = 1, M TEMP = B( I, J ) IF( NOUNIT ) $ TEMP = TEMP*A( I, I ) DO 120, K = I + 1, M TEMP = TEMP + A( K, I )*B( K, J ) 120 CONTINUE B( I, J ) = ALPHA*TEMP 130 CONTINUE 140 CONTINUE END IF END IF ELSE IF( LSAME( TRANSA, 'N' ) )THEN * * Form B := alpha*B*A. * IF( UPPER )THEN DO 180, J = N, 1, -1 TEMP = ALPHA IF( NOUNIT ) $ TEMP = TEMP*A( J, J ) DO 150, I = 1, M B( I, J ) = TEMP*B( I, J ) 150 CONTINUE DO 170, K = 1, J - 1 IF( A( K, J ).NE.ZERO )THEN TEMP = ALPHA*A( K, J ) DO 160, I = 1, M B( I, J ) = B( I, J ) + TEMP*B( I, K ) 160 CONTINUE END IF 170 CONTINUE 180 CONTINUE ELSE DO 220, J = 1, N TEMP = ALPHA IF( NOUNIT ) $ TEMP = TEMP*A( J, J ) DO 190, I = 1, M B( I, J ) = TEMP*B( I, J ) 190 CONTINUE DO 210, K = J + 1, N IF( A( K, J ).NE.ZERO )THEN TEMP = ALPHA*A( K, J ) DO 200, I = 1, M B( I, J ) = B( I, J ) + TEMP*B( I, K ) 200 CONTINUE END IF 210 CONTINUE 220 CONTINUE END IF ELSE * * Form B := alpha*B*A'. * IF( UPPER )THEN DO 260, K = 1, N DO 240, J = 1, K - 1 IF( A( J, K ).NE.ZERO )THEN TEMP = ALPHA*A( J, K ) DO 230, I = 1, M B( I, J ) = B( I, J ) + TEMP*B( I, K ) 230 CONTINUE END IF 240 CONTINUE TEMP = ALPHA IF( NOUNIT ) $ TEMP = TEMP*A( K, K ) IF( TEMP.NE.ONE )THEN DO 250, I = 1, M B( I, K ) = TEMP*B( I, K ) 250 CONTINUE END IF 260 CONTINUE ELSE DO 300, K = N, 1, -1 DO 280, J = K + 1, N IF( A( J, K ).NE.ZERO )THEN TEMP = ALPHA*A( J, K ) DO 270, I = 1, M B( I, J ) = B( I, J ) + TEMP*B( I, K ) 270 CONTINUE END IF 280 CONTINUE TEMP = ALPHA IF( NOUNIT ) $ TEMP = TEMP*A( K, K ) IF( TEMP.NE.ONE )THEN DO 290, I = 1, M B( I, K ) = TEMP*B( I, K ) 290 CONTINUE END IF 300 CONTINUE END IF END IF END IF * RETURN * * End of DTRMM . * END SUBROUTINE DTRMV ( UPLO, TRANS, DIAG, N, A, LDA, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, LDA, N CHARACTER*1 DIAG, TRANS, UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ) * .. * * Purpose * ======= * * DTRMV performs one of the matrix-vector operations * * x := A*x, or x := A'*x, * * where x is an n element vector and A is an n by n unit, or non-unit, * upper or lower triangular matrix. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the operation to be performed as * follows: * * TRANS = 'N' or 'n' x := A*x. * * TRANS = 'T' or 't' x := A'*x. * * TRANS = 'C' or 'c' x := A'*x. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit * triangular as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array A must contain the upper * triangular matrix and the strictly lower triangular part of * A is not referenced. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array A must contain the lower * triangular matrix and the strictly upper triangular part of * A is not referenced. * Note that when DIAG = 'U' or 'u', the diagonal elements of * A are not referenced either, but are assumed to be unity. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, n ). * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element vector x. On exit, X is overwritten with the * tranformed vector x. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, KX LOGICAL NOUNIT * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO , 'U' ).AND. $ .NOT.LSAME( UPLO , 'L' ) )THEN INFO = 1 ELSE IF( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 2 ELSE IF( .NOT.LSAME( DIAG , 'U' ).AND. $ .NOT.LSAME( DIAG , 'N' ) )THEN INFO = 3 ELSE IF( N.LT.0 )THEN INFO = 4 ELSE IF( LDA.LT.MAX( 1, N ) )THEN INFO = 6 ELSE IF( INCX.EQ.0 )THEN INFO = 8 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTRMV ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * NOUNIT = LSAME( DIAG, 'N' ) * * Set up the start point in X if the increment is not unity. This * will be ( N - 1 )*INCX too small for descending loops. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through A. * IF( LSAME( TRANS, 'N' ) )THEN * * Form x := A*x. * IF( LSAME( UPLO, 'U' ) )THEN IF( INCX.EQ.1 )THEN DO 20, J = 1, N IF( X( J ).NE.ZERO )THEN TEMP = X( J ) DO 10, I = 1, J - 1 X( I ) = X( I ) + TEMP*A( I, J ) 10 CONTINUE IF( NOUNIT ) $ X( J ) = X( J )*A( J, J ) END IF 20 CONTINUE ELSE JX = KX DO 40, J = 1, N IF( X( JX ).NE.ZERO )THEN TEMP = X( JX ) IX = KX DO 30, I = 1, J - 1 X( IX ) = X( IX ) + TEMP*A( I, J ) IX = IX + INCX 30 CONTINUE IF( NOUNIT ) $ X( JX ) = X( JX )*A( J, J ) END IF JX = JX + INCX 40 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 60, J = N, 1, -1 IF( X( J ).NE.ZERO )THEN TEMP = X( J ) DO 50, I = N, J + 1, -1 X( I ) = X( I ) + TEMP*A( I, J ) 50 CONTINUE IF( NOUNIT ) $ X( J ) = X( J )*A( J, J ) END IF 60 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 80, J = N, 1, -1 IF( X( JX ).NE.ZERO )THEN TEMP = X( JX ) IX = KX DO 70, I = N, J + 1, -1 X( IX ) = X( IX ) + TEMP*A( I, J ) IX = IX - INCX 70 CONTINUE IF( NOUNIT ) $ X( JX ) = X( JX )*A( J, J ) END IF JX = JX - INCX 80 CONTINUE END IF END IF ELSE * * Form x := A'*x. * IF( LSAME( UPLO, 'U' ) )THEN IF( INCX.EQ.1 )THEN DO 100, J = N, 1, -1 TEMP = X( J ) IF( NOUNIT ) $ TEMP = TEMP*A( J, J ) DO 90, I = J - 1, 1, -1 TEMP = TEMP + A( I, J )*X( I ) 90 CONTINUE X( J ) = TEMP 100 CONTINUE ELSE JX = KX + ( N - 1 )*INCX DO 120, J = N, 1, -1 TEMP = X( JX ) IX = JX IF( NOUNIT ) $ TEMP = TEMP*A( J, J ) DO 110, I = J - 1, 1, -1 IX = IX - INCX TEMP = TEMP + A( I, J )*X( IX ) 110 CONTINUE X( JX ) = TEMP JX = JX - INCX 120 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 140, J = 1, N TEMP = X( J ) IF( NOUNIT ) $ TEMP = TEMP*A( J, J ) DO 130, I = J + 1, N TEMP = TEMP + A( I, J )*X( I ) 130 CONTINUE X( J ) = TEMP 140 CONTINUE ELSE JX = KX DO 160, J = 1, N TEMP = X( JX ) IX = JX IF( NOUNIT ) $ TEMP = TEMP*A( J, J ) DO 150, I = J + 1, N IX = IX + INCX TEMP = TEMP + A( I, J )*X( IX ) 150 CONTINUE X( JX ) = TEMP JX = JX + INCX 160 CONTINUE END IF END IF END IF * RETURN * * End of DTRMV . * END SUBROUTINE DTRSM ( SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, $ B, LDB ) * .. Scalar Arguments .. CHARACTER*1 SIDE, UPLO, TRANSA, DIAG INTEGER M, N, LDA, LDB DOUBLE PRECISION ALPHA * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), B( LDB, * ) * .. * * Purpose * ======= * * DTRSM solves one of the matrix equations * * op( A )*X = alpha*B, or X*op( A ) = alpha*B, * * where alpha is a scalar, X and B are m by n matrices, A is a unit, or * non-unit, upper or lower triangular matrix and op( A ) is one of * * op( A ) = A or op( A ) = A'. * * The matrix X is overwritten on B. * * Parameters * ========== * * SIDE - CHARACTER*1. * On entry, SIDE specifies whether op( A ) appears on the left * or right of X as follows: * * SIDE = 'L' or 'l' op( A )*X = alpha*B. * * SIDE = 'R' or 'r' X*op( A ) = alpha*B. * * Unchanged on exit. * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix A is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANSA - CHARACTER*1. * On entry, TRANSA specifies the form of op( A ) to be used in * the matrix multiplication as follows: * * TRANSA = 'N' or 'n' op( A ) = A. * * TRANSA = 'T' or 't' op( A ) = A'. * * TRANSA = 'C' or 'c' op( A ) = A'. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit triangular * as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * M - INTEGER. * On entry, M specifies the number of rows of B. M must be at * least zero. * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the number of columns of B. N must be * at least zero. * Unchanged on exit. * * ALPHA - DOUBLE PRECISION. * On entry, ALPHA specifies the scalar alpha. When alpha is * zero then A is not referenced and B need not be set before * entry. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, k ), where k is m * when SIDE = 'L' or 'l' and is n when SIDE = 'R' or 'r'. * Before entry with UPLO = 'U' or 'u', the leading k by k * upper triangular part of the array A must contain the upper * triangular matrix and the strictly lower triangular part of * A is not referenced. * Before entry with UPLO = 'L' or 'l', the leading k by k * lower triangular part of the array A must contain the lower * triangular matrix and the strictly upper triangular part of * A is not referenced. * Note that when DIAG = 'U' or 'u', the diagonal elements of * A are not referenced either, but are assumed to be unity. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. When SIDE = 'L' or 'l' then * LDA must be at least max( 1, m ), when SIDE = 'R' or 'r' * then LDA must be at least max( 1, n ). * Unchanged on exit. * * B - DOUBLE PRECISION array of DIMENSION ( LDB, n ). * Before entry, the leading m by n part of the array B must * contain the right-hand side matrix B, and on exit is * overwritten by the solution matrix X. * * LDB - INTEGER. * On entry, LDB specifies the first dimension of B as declared * in the calling (sub) program. LDB must be at least * max( 1, m ). * Unchanged on exit. * * * Level 3 Blas routine. * * * -- Written on 8-February-1989. * Jack Dongarra, Argonne National Laboratory. * Iain Duff, AERE Harwell. * Jeremy Du Croz, Numerical Algorithms Group Ltd. * Sven Hammarling, Numerical Algorithms Group Ltd. * * * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. Local Scalars .. LOGICAL LSIDE, NOUNIT, UPPER INTEGER I, INFO, J, K, NROWA DOUBLE PRECISION TEMP * .. Parameters .. DOUBLE PRECISION ONE , ZERO PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 ) * .. * .. Executable Statements .. * * Test the input parameters. * LSIDE = LSAME( SIDE , 'L' ) IF( LSIDE )THEN NROWA = M ELSE NROWA = N END IF NOUNIT = LSAME( DIAG , 'N' ) UPPER = LSAME( UPLO , 'U' ) * INFO = 0 IF( ( .NOT.LSIDE ).AND. $ ( .NOT.LSAME( SIDE , 'R' ) ) )THEN INFO = 1 ELSE IF( ( .NOT.UPPER ).AND. $ ( .NOT.LSAME( UPLO , 'L' ) ) )THEN INFO = 2 ELSE IF( ( .NOT.LSAME( TRANSA, 'N' ) ).AND. $ ( .NOT.LSAME( TRANSA, 'T' ) ).AND. $ ( .NOT.LSAME( TRANSA, 'C' ) ) )THEN INFO = 3 ELSE IF( ( .NOT.LSAME( DIAG , 'U' ) ).AND. $ ( .NOT.LSAME( DIAG , 'N' ) ) )THEN INFO = 4 ELSE IF( M .LT.0 )THEN INFO = 5 ELSE IF( N .LT.0 )THEN INFO = 6 ELSE IF( LDA.LT.MAX( 1, NROWA ) )THEN INFO = 9 ELSE IF( LDB.LT.MAX( 1, M ) )THEN INFO = 11 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTRSM ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * * And when alpha.eq.zero. * IF( ALPHA.EQ.ZERO )THEN DO 20, J = 1, N DO 10, I = 1, M B( I, J ) = ZERO 10 CONTINUE 20 CONTINUE RETURN END IF * * Start the operations. * IF( LSIDE )THEN IF( LSAME( TRANSA, 'N' ) )THEN * * Form B := alpha*inv( A )*B. * IF( UPPER )THEN DO 60, J = 1, N IF( ALPHA.NE.ONE )THEN DO 30, I = 1, M B( I, J ) = ALPHA*B( I, J ) 30 CONTINUE END IF DO 50, K = M, 1, -1 IF( B( K, J ).NE.ZERO )THEN IF( NOUNIT ) $ B( K, J ) = B( K, J )/A( K, K ) DO 40, I = 1, K - 1 B( I, J ) = B( I, J ) - B( K, J )*A( I, K ) 40 CONTINUE END IF 50 CONTINUE 60 CONTINUE ELSE DO 100, J = 1, N IF( ALPHA.NE.ONE )THEN DO 70, I = 1, M B( I, J ) = ALPHA*B( I, J ) 70 CONTINUE END IF DO 90 K = 1, M IF( B( K, J ).NE.ZERO )THEN IF( NOUNIT ) $ B( K, J ) = B( K, J )/A( K, K ) DO 80, I = K + 1, M B( I, J ) = B( I, J ) - B( K, J )*A( I, K ) 80 CONTINUE END IF 90 CONTINUE 100 CONTINUE END IF ELSE * * Form B := alpha*inv( A' )*B. * IF( UPPER )THEN DO 130, J = 1, N DO 120, I = 1, M TEMP = ALPHA*B( I, J ) DO 110, K = 1, I - 1 TEMP = TEMP - A( K, I )*B( K, J ) 110 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( I, I ) B( I, J ) = TEMP 120 CONTINUE 130 CONTINUE ELSE DO 160, J = 1, N DO 150, I = M, 1, -1 TEMP = ALPHA*B( I, J ) DO 140, K = I + 1, M TEMP = TEMP - A( K, I )*B( K, J ) 140 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( I, I ) B( I, J ) = TEMP 150 CONTINUE 160 CONTINUE END IF END IF ELSE IF( LSAME( TRANSA, 'N' ) )THEN * * Form B := alpha*B*inv( A ). * IF( UPPER )THEN DO 210, J = 1, N IF( ALPHA.NE.ONE )THEN DO 170, I = 1, M B( I, J ) = ALPHA*B( I, J ) 170 CONTINUE END IF DO 190, K = 1, J - 1 IF( A( K, J ).NE.ZERO )THEN DO 180, I = 1, M B( I, J ) = B( I, J ) - A( K, J )*B( I, K ) 180 CONTINUE END IF 190 CONTINUE IF( NOUNIT )THEN TEMP = ONE/A( J, J ) DO 200, I = 1, M B( I, J ) = TEMP*B( I, J ) 200 CONTINUE END IF 210 CONTINUE ELSE DO 260, J = N, 1, -1 IF( ALPHA.NE.ONE )THEN DO 220, I = 1, M B( I, J ) = ALPHA*B( I, J ) 220 CONTINUE END IF DO 240, K = J + 1, N IF( A( K, J ).NE.ZERO )THEN DO 230, I = 1, M B( I, J ) = B( I, J ) - A( K, J )*B( I, K ) 230 CONTINUE END IF 240 CONTINUE IF( NOUNIT )THEN TEMP = ONE/A( J, J ) DO 250, I = 1, M B( I, J ) = TEMP*B( I, J ) 250 CONTINUE END IF 260 CONTINUE END IF ELSE * * Form B := alpha*B*inv( A' ). * IF( UPPER )THEN DO 310, K = N, 1, -1 IF( NOUNIT )THEN TEMP = ONE/A( K, K ) DO 270, I = 1, M B( I, K ) = TEMP*B( I, K ) 270 CONTINUE END IF DO 290, J = 1, K - 1 IF( A( J, K ).NE.ZERO )THEN TEMP = A( J, K ) DO 280, I = 1, M B( I, J ) = B( I, J ) - TEMP*B( I, K ) 280 CONTINUE END IF 290 CONTINUE IF( ALPHA.NE.ONE )THEN DO 300, I = 1, M B( I, K ) = ALPHA*B( I, K ) 300 CONTINUE END IF 310 CONTINUE ELSE DO 360, K = 1, N IF( NOUNIT )THEN TEMP = ONE/A( K, K ) DO 320, I = 1, M B( I, K ) = TEMP*B( I, K ) 320 CONTINUE END IF DO 340, J = K + 1, N IF( A( J, K ).NE.ZERO )THEN TEMP = A( J, K ) DO 330, I = 1, M B( I, J ) = B( I, J ) - TEMP*B( I, K ) 330 CONTINUE END IF 340 CONTINUE IF( ALPHA.NE.ONE )THEN DO 350, I = 1, M B( I, K ) = ALPHA*B( I, K ) 350 CONTINUE END IF 360 CONTINUE END IF END IF END IF * RETURN * * End of DTRSM . * END SUBROUTINE DTRSV ( UPLO, TRANS, DIAG, N, A, LDA, X, INCX ) * .. Scalar Arguments .. INTEGER INCX, LDA, N CHARACTER*1 DIAG, TRANS, UPLO * .. Array Arguments .. DOUBLE PRECISION A( LDA, * ), X( * ) * .. * * Purpose * ======= * * DTRSV solves one of the systems of equations * * A*x = b, or A'*x = b, * * where b and x are n element vectors and A is an n by n unit, or * non-unit, upper or lower triangular matrix. * * No test for singularity or near-singularity is included in this * routine. Such tests must be performed before calling this routine. * * Parameters * ========== * * UPLO - CHARACTER*1. * On entry, UPLO specifies whether the matrix is an upper or * lower triangular matrix as follows: * * UPLO = 'U' or 'u' A is an upper triangular matrix. * * UPLO = 'L' or 'l' A is a lower triangular matrix. * * Unchanged on exit. * * TRANS - CHARACTER*1. * On entry, TRANS specifies the equations to be solved as * follows: * * TRANS = 'N' or 'n' A*x = b. * * TRANS = 'T' or 't' A'*x = b. * * TRANS = 'C' or 'c' A'*x = b. * * Unchanged on exit. * * DIAG - CHARACTER*1. * On entry, DIAG specifies whether or not A is unit * triangular as follows: * * DIAG = 'U' or 'u' A is assumed to be unit triangular. * * DIAG = 'N' or 'n' A is not assumed to be unit * triangular. * * Unchanged on exit. * * N - INTEGER. * On entry, N specifies the order of the matrix A. * N must be at least zero. * Unchanged on exit. * * A - DOUBLE PRECISION array of DIMENSION ( LDA, n ). * Before entry with UPLO = 'U' or 'u', the leading n by n * upper triangular part of the array A must contain the upper * triangular matrix and the strictly lower triangular part of * A is not referenced. * Before entry with UPLO = 'L' or 'l', the leading n by n * lower triangular part of the array A must contain the lower * triangular matrix and the strictly upper triangular part of * A is not referenced. * Note that when DIAG = 'U' or 'u', the diagonal elements of * A are not referenced either, but are assumed to be unity. * Unchanged on exit. * * LDA - INTEGER. * On entry, LDA specifies the first dimension of A as declared * in the calling (sub) program. LDA must be at least * max( 1, n ). * Unchanged on exit. * * X - DOUBLE PRECISION array of dimension at least * ( 1 + ( n - 1 )*abs( INCX ) ). * Before entry, the incremented array X must contain the n * element right-hand side vector b. On exit, X is overwritten * with the solution vector x. * * INCX - INTEGER. * On entry, INCX specifies the increment for the elements of * X. INCX must not be zero. * Unchanged on exit. * * * Level 2 Blas routine. * * -- Written on 22-October-1986. * Jack Dongarra, Argonne National Lab. * Jeremy Du Croz, Nag Central Office. * Sven Hammarling, Nag Central Office. * Richard Hanson, Sandia National Labs. * * * .. Parameters .. DOUBLE PRECISION ZERO PARAMETER ( ZERO = 0.0D+0 ) * .. Local Scalars .. DOUBLE PRECISION TEMP INTEGER I, INFO, IX, J, JX, KX LOGICAL NOUNIT * .. External Functions .. LOGICAL LSAME EXTERNAL LSAME * .. External Subroutines .. EXTERNAL XERBLA * .. Intrinsic Functions .. INTRINSIC MAX * .. * .. Executable Statements .. * * Test the input parameters. * INFO = 0 IF ( .NOT.LSAME( UPLO , 'U' ).AND. $ .NOT.LSAME( UPLO , 'L' ) )THEN INFO = 1 ELSE IF( .NOT.LSAME( TRANS, 'N' ).AND. $ .NOT.LSAME( TRANS, 'T' ).AND. $ .NOT.LSAME( TRANS, 'C' ) )THEN INFO = 2 ELSE IF( .NOT.LSAME( DIAG , 'U' ).AND. $ .NOT.LSAME( DIAG , 'N' ) )THEN INFO = 3 ELSE IF( N.LT.0 )THEN INFO = 4 ELSE IF( LDA.LT.MAX( 1, N ) )THEN INFO = 6 ELSE IF( INCX.EQ.0 )THEN INFO = 8 END IF IF( INFO.NE.0 )THEN CALL XERBLA( 'DTRSV ', INFO ) RETURN END IF * * Quick return if possible. * IF( N.EQ.0 ) $ RETURN * NOUNIT = LSAME( DIAG, 'N' ) * * Set up the start point in X if the increment is not unity. This * will be ( N - 1 )*INCX too small for descending loops. * IF( INCX.LE.0 )THEN KX = 1 - ( N - 1 )*INCX ELSE IF( INCX.NE.1 )THEN KX = 1 END IF * * Start the operations. In this version the elements of A are * accessed sequentially with one pass through A. * IF( LSAME( TRANS, 'N' ) )THEN * * Form x := inv( A )*x. * IF( LSAME( UPLO, 'U' ) )THEN IF( INCX.EQ.1 )THEN DO 20, J = N, 1, -1 IF( X( J ).NE.ZERO )THEN IF( NOUNIT ) $ X( J ) = X( J )/A( J, J ) TEMP = X( J ) DO 10, I = J - 1, 1, -1 X( I ) = X( I ) - TEMP*A( I, J ) 10 CONTINUE END IF 20 CONTINUE ELSE JX = KX + ( N - 1 )*INCX DO 40, J = N, 1, -1 IF( X( JX ).NE.ZERO )THEN IF( NOUNIT ) $ X( JX ) = X( JX )/A( J, J ) TEMP = X( JX ) IX = JX DO 30, I = J - 1, 1, -1 IX = IX - INCX X( IX ) = X( IX ) - TEMP*A( I, J ) 30 CONTINUE END IF JX = JX - INCX 40 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 60, J = 1, N IF( X( J ).NE.ZERO )THEN IF( NOUNIT ) $ X( J ) = X( J )/A( J, J ) TEMP = X( J ) DO 50, I = J + 1, N X( I ) = X( I ) - TEMP*A( I, J ) 50 CONTINUE END IF 60 CONTINUE ELSE JX = KX DO 80, J = 1, N IF( X( JX ).NE.ZERO )THEN IF( NOUNIT ) $ X( JX ) = X( JX )/A( J, J ) TEMP = X( JX ) IX = JX DO 70, I = J + 1, N IX = IX + INCX X( IX ) = X( IX ) - TEMP*A( I, J ) 70 CONTINUE END IF JX = JX + INCX 80 CONTINUE END IF END IF ELSE * * Form x := inv( A' )*x. * IF( LSAME( UPLO, 'U' ) )THEN IF( INCX.EQ.1 )THEN DO 100, J = 1, N TEMP = X( J ) DO 90, I = 1, J - 1 TEMP = TEMP - A( I, J )*X( I ) 90 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( J, J ) X( J ) = TEMP 100 CONTINUE ELSE JX = KX DO 120, J = 1, N TEMP = X( JX ) IX = KX DO 110, I = 1, J - 1 TEMP = TEMP - A( I, J )*X( IX ) IX = IX + INCX 110 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( J, J ) X( JX ) = TEMP JX = JX + INCX 120 CONTINUE END IF ELSE IF( INCX.EQ.1 )THEN DO 140, J = N, 1, -1 TEMP = X( J ) DO 130, I = N, J + 1, -1 TEMP = TEMP - A( I, J )*X( I ) 130 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( J, J ) X( J ) = TEMP 140 CONTINUE ELSE KX = KX + ( N - 1 )*INCX JX = KX DO 160, J = N, 1, -1 TEMP = X( JX ) IX = KX DO 150, I = N, J + 1, -1 TEMP = TEMP - A( I, J )*X( IX ) IX = IX - INCX 150 CONTINUE IF( NOUNIT ) $ TEMP = TEMP/A( J, J ) X( JX ) = TEMP JX = JX - INCX 160 CONTINUE END IF END IF END IF * RETURN * * End of DTRSV . * END integer function idamax(n,dx,incx) c c finds the index of element having max. absolute value. c jack dongarra, linpack, 3/11/78. c modified 3/93 to return if incx .le. 0. c modified 12/3/93, array(1) declarations changed to array(*) c double precision dx(*),dmax integer i,incx,ix,n c idamax = 0 if( n.lt.1 .or. incx.le.0 ) return idamax = 1 if(n.eq.1)return if(incx.eq.1)go to 20 c c code for increment not equal to 1 c ix = 1 dmax = dabs(dx(1)) ix = ix + incx do 10 i = 2,n if(dabs(dx(ix)).le.dmax) go to 5 idamax = i dmax = dabs(dx(ix)) 5 ix = ix + incx 10 continue return c c code for increment equal to 1 c 20 dmax = dabs(dx(1)) do 30 i = 2,n if(dabs(dx(i)).le.dmax) go to 30 idamax = i dmax = dabs(dx(i)) 30 continue return end LOGICAL FUNCTION LSAME( CA, CB ) * * -- LAPACK auxiliary routine (version 2.0) -- * Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd., * Courant Institute, Argonne National Lab, and Rice University * January 31, 1994 * * .. Scalar Arguments .. CHARACTER CA, CB * .. * * Purpose * ======= * * LSAME returns .TRUE. if CA is the same letter as CB regardless of * case. * * Arguments * ========= * * CA (input) CHARACTER*1 * CB (input) CHARACTER*1 * CA and CB specify the single characters to be compared. * * ===================================================================== * * .. Intrinsic Functions .. INTRINSIC ICHAR * .. * .. Local Scalars .. INTEGER INTA, INTB, ZCODE * .. * .. Executable Statements .. * * Test if the characters are equal * LSAME = CA.EQ.CB IF( LSAME ) $ RETURN * * Now test for equivalence if both characters are alphabetic. * ZCODE = ICHAR( 'Z' ) * * Use 'Z' rather than 'A' so that ASCII can be detected on Prime * machines, on which ICHAR returns a value with bit 8 set. * ICHAR('A') on Prime machines returns 193 which is the same as * ICHAR('A') on an EBCDIC machine. * INTA = ICHAR( CA ) INTB = ICHAR( CB ) * IF( ZCODE.EQ.90 .OR. ZCODE.EQ.122 ) THEN * * ASCII is assumed - ZCODE is the ASCII code of either lower or * upper case 'Z'. * IF( INTA.GE.97 .AND. INTA.LE.122 ) INTA = INTA - 32 IF( INTB.GE.97 .AND. INTB.LE.122 ) INTB = INTB - 32 * ELSE IF( ZCODE.EQ.233 .OR. ZCODE.EQ.169 ) THEN * * EBCDIC is assumed - ZCODE is the EBCDIC code of either lower or * upper case 'Z'. * IF( INTA.GE.129 .AND. INTA.LE.137 .OR. $ INTA.GE.145 .AND. INTA.LE.153 .OR. $ INTA.GE.162 .AND. INTA.LE.169 ) INTA = INTA + 64 IF( INTB.GE.129 .AND. INTB.LE.137 .OR. $ INTB.GE.145 .AND. INTB.LE.153 .OR. $ INTB.GE.162 .AND. INTB.LE.169 ) INTB = INTB + 64 * ELSE IF( ZCODE.EQ.218 .OR. ZCODE.EQ.250 ) THEN * * ASCII is assumed, on Prime machines - ZCODE is the ASCII code * plus 128 of either lower or upper case 'Z'. * IF( INTA.GE.225 .AND. INTA.LE.250 ) INTA = INTA - 32 IF( INTB.GE.225 .AND. INTB.LE.250 ) INTB = INTB - 32 END IF LSAME = INTA.EQ.INTB * * RETURN * * End of LSAME * END