Dear Emacs, please make this -*-Text-*- mode! ************************************************** * * * 2.5 SERIES NEWS * * * ************************************************** CHANGES IN R VERSION 2.5.0 USER-VISIBLE CHANGES NEW FEATURES o nls.control(* , printEval = FALSE, warnOnly = FALSE) are two new options to help better analyze (non-)convergence of nls(), thanks to Kate Mullen. nls() and summary(nls()) now contain more information and also print information about convergence. o file_test() is now also available in package utils. (It is now private in package tools.) o stack() and unstack() have been moved to package utils. o read.table(), write.table() and allies have been moved to package utils. o Error messages from subassignment calls are more likely to give a recognizable (rather than massaged) call. o A few more cases of subassignment work, e.g. [] <- and [] <- expression, with suitable coercion of the LHS. INSTALLATION o The extraction of info from Subversion for an SVN checkout now also works for svn >= 1.4.0. However, on Windows the 'Last Changed Date' will be in the local timezone, and not in GMT as previously. DEPRECATED & DEFUNCT o symbol.C() and symbol.For() are defunct, and have been replaced by wrappers that give a warning. o Calling a builtin function with an empty argument is now always an error. o The autoloading of ts() is defunct. ************************************************** * * * 2.4 SERIES NEWS * * * ************************************************** CHANGES IN R VERSION 2.4.0 USER-VISIBLE CHANGES o The startup message now prints first the version string and then the copyright notice (to be more similar to R --version). o save() by default evaluates promise objects. The old behaviour (to save the promise and its evaluation environment) can be obtained by setting the new argument 'eval.promises' to FALSE. (Note that this does not apply to promises embedded in objects, only to top-level objects.) o The functions read.csv(), read.csv2(), read.delim(), read.delim2() now default their 'comment.char' argument to "". (These functions are designed to read files produced by other software, which might use the # character inside fields, but are unlikely to use it for comments.) o The bindings in the base environment/namespace (currently the same thing) are now locked. This means that the values of base functions cannot be changed except via assignInNamespace() and similar tricks. o [[ on a factor now returns a one-element factor (and not an integer), as.list() on a factor returns a list of one-element factors (and not of character vectors), and unlist() on a list of factors returns a factor (and not an integer vector). These changes may affect the results of sapply() and lapply() applied to factors. o mauchly.test() now returns the W statistic (for comparability with SAS and SPSS), rather than the z (which was accidentally not named in the output) o sort(x, decreasing = FALSE, ...) is now a generic function. This means that 'partial' is no longer the second argument, and calls which used positional matching may be incorrect: we try to detect them. o See the section on 'Changes to S4 methods': all packages depending on 'methods' need to be re-installed. NEW FEATURES o agrep(), grep(), strwrap(), strtrim(), substr() and related functions now coerce arguments which should be character via as.character() rather than internally (so method dispatch takes place, e.g. for factors). chartr(), charfold(), tolower() and toupper() now coerce their main argument if necessary to a character vector via as.character(). Functions which work element-by-element on character vectors to give a character result now preserve attributes including names, dims and dimnames (as suggested by the Blue Book p. 144). Such functions include charfold(), chartr(), gsub(), strtrim(), sub(), substr(), tolower() and toupper(). (Note that coercion of a non-character argument may lose the attributes.) agrep(value = TRUE) preserves names for compatibility with grep(). nchar() has always preserved dims/dimnames (undocumented before) and now also preserves names. o .Deprecated and .Defunct take a new parameter, msg, that allows for the specification of the message printed and facilitates deprecation of calling sequences etc. o .Fortran() will map 'name' to lower case, and will work with 'name' containing underscores. o The default is now .saveRDS(compress = TRUE) o The :: operator now also works for packages without name spaces that are on the search path. o [[ on a list does not duplicate the extracted element unless necessary. (It did not duplicate in other cases, e.g. a pairlist.) o argsAnywhere() works like args() on non-exported functions. o as.data.frame() gains a '...' argument. o Added an as.data.frame() method for class "ftable". o as.list() is now handled by internal code and no longer loses attributes such as names. as.list() no longer duplicates (unnecessarily). o as.POSIX[cl]t can now convert character strings containing fractional seconds. o attach() can now attach a copy of an environment. o available.packages() and installed.packages() gain a 'fields' argument thanks to Seth Falcon. o axis.POSIXct() uses a different algorithm for ranges of 2 to 50 days that will mark days at midnight in the current timezone (even if the graph crosses a DST change). o body<-() and formals<-() default to envir = environment(fun), that is they do not by default change the environment. (Previously they changed it to parent.frame().) o New function combn(x, m, ..) for computing on all combinations of size 'm' (for small 'm' !). o The cumxxx() functions now handle logical/integer arguments separately from numeric ones, and so return an integer result where appropriate. o data.frame() has a new argument 'stringsAsFactor'. This and the default for read.table(as.is=) are set from the new global option 'stringsAsFactors' via the utility function default.stringsAsFactors(). o dev.interactive() now has an optional argument 'orNone'. o df() now has a noncentrality argument 'ncp', based on a contribution by Peter Ruckdeschel. o example() gains an argument 'ask' which defaults to "TRUE when sensible", but the default can be overridden by setting option 'example.ask'. o expand.grid() now has an argument 'KEEP.OUT.ATTRS' which can suppress (the potentially expensive) "out.attrs" attribute. It no longer returns an extraneous 'colnames' attribute. o The subset and subassign methods for factors now handle factor matrices, and dim() can be set on a factor. o There is now a format() method for class "ftable". o head(x, n) and tail(x, n) now also work for negative arguments, thanks to Vincent Goulet. o head.matrix() and tail.matrix() are no longer hidden, to be used for building head() and tail() methods for other classes. o If help() finds multiple help files for a given topic, a menu of titles is used to allow interactive choice. o help.search() now rebuilds the database if 'package' specifies a package not in the saved database. o hist(*, plot = FALSE) now warns about unused arguments. o history() gains a 'pattern' argument as suggested by Romain Francois. o integer(0) now prints as that rather than "numeric(0)" (it always deparsed as "integer(0)"). o interaction(..., drop=TRUE) now gives the same result as interaction(...)[,drop=TRUE] (it used to sometimes give a different order for the levels). o lag.plot() produces a conventional plot (not setting mfrow) if only one plot is to be produced. o lapply() does much less copying. Vector X are handled without duplication, and other types are coerced via as.list(). (As a result, package 'boot' runs its examples 4% faster.) lapply() now coerces to a list (rather than traverse the pairlist from the beginning for each item). o legend() has new parameters 'box.lwd' and 'box.lty'. o lines() gains a simple method for isoreg() results. o load() no longer coerces pairlists to lists (which was undocumented, but has been happening since 1998). o make.link() now returns an object of class "link-glm". The GLM families accept an object of this class for their 'link' argument, which allows user-specified link functions. Also, quasi() allows user-specified variance functions. o mapply() uses names more analogously to lapply(), e.g.. o matplot() now accepts a 'bg' argument similarly to plot.default() etc. o median() is now generic, and its default method uses mean() rather than sum() and so is more widely applicable (e.g. to dates). o Dummy functions memory.size() and memory.limit() are available on Unix-alikes, for people who have not noticed that documentation is Windows-specific. o merge() works more efficiently when there are relatively few matches between the data frames (for example, for 1-1 matching). The order of the result is changed for 'sort = FALSE'. o merge() now inserts row names as a character column and not a factor: this makes the default sort order more comprehensible. o Raw, complex and character vectors are now allowed in model frames (there was a previously undocumented restriction to logical, integer and numeric types.). Character vectors in a formula passed to model.matrix() are converted to factors and coded accordingly. o modifyList() utility, typically for housekeeping nested lists. o x <- 1:20; y <- rnorm(x); nls(y ~ A*exp(-x^2/sig)) no longer returns an unhelpful error message. In this and similar cases, it now tries a wild guess for starting values. o Ops.difftime() now handles unary minus and plus. o Ops.Date() and Ops.POSIXt() now allow character arguments (which are coerced to the appropriate class before comparison, for Ops.POSIXt() using the current time zone). o There is a new option(max.contour.segments = 25000) which can be raised to allow extremely complex contour lines in contour() and contourLines(). (PR#9205) o options(max.print = N) where N defaults to 99999 now cuts printing of large objects after about N entries. print(x, ..., max = N) does the same for the default method and those building on print.default(). options("menu.graphics") controls if graphical menus should be used when available. options("par.ask.default") allows the default for par("ask") to be set for a newly-opened device. (Defaults to FALSE, the previous behaviour.) The way option("papersize") is set has been changed. On platforms which support the LC_PAPER locale category, the setting is taken first from the R_PAPERSIZE environment variable at run time, then from the LC_PAPER category ("letter" for _US and _CA locales and "a4" otherwise). On other platforms (including Windows and older Unixen), the choice is unchanged. o package.skeleton() gains arguments 'namespace' and 'code_files'. o par(ask=TRUE) now only applies to interactive R sessions. o parse() now returns up to 'n' expressions, rather than fill the expressions vector with NULL. (This is now compatible with S.) o The 'version' argument for pdf() is now increased automatically (with a warning) if features which need a higher level are used. o pie() now allows expressions for 'labels', and empty slices. o There is a new '%.%' operator for mathematical annotations (plotmath) which draws a centred multiplication dot (a \cdot in LaTeX), thanks to Uwe Ligges. o predict.lm() gains a 'pred.var' argument. (Wishlist PR#8877.) o print.summary.{aov,glm,lm,nls} and print.{aov,glm} make use of naprint() to report when na.action altered the model frame. o print.table(T, zero.print=ch) now also replaces 0 by ch when T is non-integer with integer entries. o Recursive rapply() which is similar to lapply but used recursively and can restrict the classes of elements to which it is applied. o r2dtable() has been moved to package 'stats'. o New function read.DIF() to read Data Interchange Format files, and (on Windows) this format from the clipboard. o New experimental function readNEWS() to read R's own "NEWS" file and similarly formatted ones. o readLines() has a new argument 'warn' to suppress warnings: the default behaviour is still to warn. o reg.finalizer() has a new argument 'onexit' to parallel the C-level equivalent R_RegisterFinalizerEx. o rep() is now a primitive function and under some conditions very much faster: rep.int() is still a little faster (but does less). (Because it is primitive there are minor changes to the call semantics: see the help page.) o The 'row.names' of a data frame may be stored internally as an integer or character vector. This can result in considerably more compact storage (and more logical row names from rbind) when the row.names are 1:nrow(x). However, such data frames are not compatible with earlier versions of R: this can be ensured by supplying a character vector as 'row.names'. row.names() will always return a character vector, but direct access to the attribute may not. The internal storage of row.names = 1:n just records 'n', for efficiency with very long vectors. The "row.names" attribute must be a character or integer vector, and this is now enforced by the C code. o The "data.frame" and "matrix" methods for rowsum() gain an 'na.rm' argument. o Experimental support for memory-use profiling via Rprof(), summaryRprof(), Rprofmem() and tracemem(). o save.image() [also called by sys.save.image() and hence from q()] now defaults to saving compressed binary images. To revert to the previous behaviour set option "save.image.defaults": see ?save.image. o There is a new primitive seq.int() which is slightly more restricted than seq() but often very much faster, and new primitives seq_along() and seq_len() which are faster still. o serialize(connection = NULL) now returns a raw vector (and not a character string). unserialize() accepts both old and new formats (and has since 2.3.0). o setwd() now returns the previously current directory (invisibly). o The function sort() is now sort.int(), with a new generic function sort() which behaves in the same way (except for the order of its argument list) for objects without a class, and relies on the '[' method for objects with a class (unless a specific method has been written, as it has for class "POSIXlt"). o sort.list() now implements complex vectors (PR#9039), and how complex numbers are sorted is now documented. o spline() and splinefun() now follow approx[fun] to have an argument 'ties = mean' which makes them applicable also when 'x' has duplicated values. o str(x) does not print the S3 "class" attribute when it is the same as 'mode' (which is printed anyway, possibly abbreviated) and it puts it beside mode for atomic objects such as S3 class "table". o str() now outputs 'data.frame' instead of `data.frame'; this may affect some strict (Package) tests. o str() now takes also its defaults for 'vec.len' and 'digits.d' from options('str') which can be set by the new strOptions(). o symnum() has a new argument 'numeric.x' particularly useful for handling 0/1 data. o Sys.getlocale() and Sys.setlocale() support LC_MESSAGES, LC_PAPER and LC_MEASUREMENT if the platform does. o Sweave has a new options 'pdf.encoding' and 'pdf.version' for its Rweave driver. o The character vector used by an output textConnection() has a locked binding whilst the connection is open. There is a new function textConnectionValue() to retrieve the value of an output textConnection(). o traceback() gains a 'max.lines' argument. .Traceback is no longer stored in the workspace. o warning(immediate. = TRUE) now applies to getOption("warn") < 0 and not just == 0. o warnings() is now an accessor function for 'last.warning' (which is no longer stored in the workspace) with a print() method. o The internal internet download functions have some new features from libxml 2.6.26. o There is an option "HTTPUserAgent" to set the User Agent in R download requests etc. Patch from S. Falcon. o PCRE has been updated to version 6.7. o The C function substituteList now has tail recursion expanded out, so C stack overflow is less likely. (PR#8141, fix by Kevin Hendricks) o The (somewhat soft) 1023/4 byte limit on command lines is now documented in 'An Introduction to R'. o The maximum number of open connections has been increased from 50 to 128. o There is a new manual 'R Internals' on R internal stuctures plus the former appendices of 'Writing R Extensions'. o The autoloads introduced at the package re-organization have been almost completely removed: the one that remains is for ts(). o The setting of the various Java configuration variables has been improved to refer to JAVA_HOME, and they are now documented in the R-admin manual. o It is (again) possible to calculate prediction intervals from "lm" objects for the original data frame, now with a warning that the intervals refer to future observations. Weighted intervals have also been implemented, with user-specifiable weights. Warnings are given in cases where the default behaviour might differ from user expectations. See the ?predict.lm for details. CHANGES TO S4 METHODS o The default prototype object for S4 classes will have its own internal type in 2.4.0, as opposed to being an empty list (the cause of several errors in the code up to 2.3.1). Note that old binary objects, including class definitions, will be inconsistent with the type, and should be recreated. o S4 method dispatch has been completely revised to use cached generic functions and to search for the best match among inherited methods. See ?Methods and http://developer.r-project.org/howMethodsWork.pdf o Objects created from an S4 class are now marked by an internal flag, tested by isS4() in R and by macro IS_S4_OBJECT() in C. This is an efficient and reliable test, and should replace all earlier heuristic tests. o Some changes have been made to automatic printing of S4 objects, to make this correspond to a call to show(), as per 'Programming with Data'. o S4 generic and class definitions are now cached when the related package is loaded. This should improve efficiency and also avoid anomalous situations in which a class or generic cannot be found. o trace() now creates a new S4 class for the traced object if required. This allows tracing of user-defined subclasses of "function". DEPRECATED & DEFUNCT o The re-named tcltk functions tkcmd, tkfile.tail, tkfile.dir, tkopen, tkclose, tkputs, tkread are now defunct. o Argument 'col' of bxp() has been removed: use 'boxfill'. o Use of NULL as an environment is now an error. o postscriptFont() is defunct: use Type1Font(). o La.chol() and La.chol2inv() are defunct (they were the same as the default options of chol() and chol2inv). o La.svd(method = "dgesvd") is defunct. o Files install.R and R_PROFILE.R in packages are now ignored (with a warning). o The following deprecated command-line options to INSTALL have been removed (use the fields in the DESCRIPTION file instead): -s --save --no-save --lazy --no-lazy --lazy-data --no-lazy-data o Graphical parameter 'tmag' is obsolete. o mauchley.test() (package 'stats') is now defunct. o symbol.C() and symbol.For() are deprecated. They are required in S for use with is.loaded(), but are not so required in R. o load()ing an object saved in one of the formats used prior to R 1.4.0 is deprecated. Such objects should be re-saved in the current format. o save(version = 1) is now deprecated. C-LEVEL FACILITIES o The convenience function ScalarLogical now coerces all non-zero non-NA values to TRUE. o The vector accessor functions such as INTEGER, REAL and SET_VECTOR_ELT now check that they are called on the correct SEXPTYPE (or at least on a compatible one). See `Writing R Extensions' for the details and for a stricter test regime. o It is no longer possible to pass list variables to .C(DUP = FALSE): it would have given rise to obscure garbage collection errors. o allocString is now a macro, so packages using it will need to be reinstalled. o R_ParseVector was returning with object(s) protected in the parser if the status was PARSE_INCOMPLETE or PARSE_ERROR. o There is a new function Rf_endEmbeddedR to properly terminate a session started by Rf_initEmbeddedR, and both are now available on Windows as well as on Unix-alikes. These and related functions are declared in a new header . If R_TempDir is set when embedded R is initialized it is assumed to point to a valid session temporary directory: see `Writing R Extensions'. o There is a new interface allowing one package to make C routines available to C code in other packages. The interface consists of the routines R_RegisterCCallable and R_GetCCallable. These functions are declared in . This interface is experimental and subject to change. In addition, a package can arrange to make use of header files in another (already installed) package via the 'LinkingTo' field in the DESCRIPTION file: see 'Writing R Extensions'. UTILITIES o R CMD SHLIB now handles (as linker commands) -L*, -l* and *.a. o R CMD check now: - warns if there are non-ASCII characters in the R code (as these will likely be syntax errors in some locale). - tests Rd cross-references by default, and tests for (syntactically) valid CITATION metadata. - tests that the package can be loaded, and that the package and namespace (if there is one) can each be loaded in startup code (before the standard packages are loaded). - tests for empty 'exec' or 'inst' directories. - checks if $(FLIBS) is used when $(BLAS_LIBS) is. - checks that all packages (except non-S4-using standard packages) used in ::, :::, library() and require() calls are declared in the DESCRIPTION file, and 'methods' is declared if S4 classes or methods are set. - throws an error if the standard packages 'methods' and 'stats4' are imported from in the NAMESPACE file and not declared in the DESCRIPTION file. o The test script produced by massage-Examples.pl no longer creates objects in the base environment. o New utilties R CMD Stangle and R CMD Sweave for extracting S/R code from and processing Sweave documentation, respectively. o The DESCRIPTION file of packages may contain an 'Enhances:' field. o An R CMD javareconf script has been added to allow Java configuration to be updated even after R has been installed. INSTALLATION o The C function realpath (used by normalizePath()) is hidden on some systems and we try harder to find it. o There is a new option --enable-BLAS-shlib, which compiles the BLAS into a dynamic library -lRblas and links against that. For the pros and cons see the R-admin manual. The defaults are now --without-blas (so you have explicitly to ask for an external BLAS), and --enable-BLAS-shlib unless a usable external BLAS is found or on AIX or on MacOS X 10.2 and earlier. o MacOS X did not like having LSAME in both BLAS and LAPACK libraries, so it is no longer part of the R-internal LAPACK. We now require an external BLAS to provide LSAME: it seems that nowadays all do. o The configure test for 'whether mixed C/Fortran code can be run' has been improved as on one system that test passed but the Fortran run-time library was broken. o A precious configure variable DEFS can be set to pass defines (e.g. -DUSE_TYPE_CHECKING_STRICT) to C code when compiling R. o There is now a test for visible __libc_stack_end on Linux systems (since it is not visible on some recent glibc's built from the sources). o MacOS X 10.4 and higher now use two-level namespaces, single module in a shared library and allow undefined symbols to be resolved at run-time. This implies that common symbols are now allowed in package libraries. --enable-BLAS-shlib is supported for internal BLAS, external BLAS framework and external static BLAS. An external dynamic library BLAS is NOT supported. (But it can be easily used by replacing internal BLAS library file later.) MacOS X < 10.4 does not support --enable-BLAS-shlib. o Dynamic libraries and modules use a flat namespace on MacOS X 10.4 and higher if either Xcode tools don't support dynamic lookup (Xcode < 2.3) or the FORCE_FLAT_NAMESPACE environment variable is set. (The latter was introduced temporarily for testing purposes and may go away anytime.) o configure now defaults to 'run-time linking' on AIX (and AIX < 4.2 is no longer allowed), using -bexpall rather than export/import files. If this works, it allows R to be built in the same way as other Unix-alikes, including with R as a shared library and with a shared BLAS. o The "mac.binary" package type now defaults to universal binary. If a repository supports architecture-specific Mac binaries, they can be requested by using "mac.binary.xxx" in contrib.url(), where xxx is the desired architecture. BUG FIXES o The name of a Fortran symbol reported to be missing by .Fortran() is now the actual name. (What was reported to be an 'entry point' was missing the common leading underscore.) o print() on a MBCS character string now works properly a character at a time rather than a byte at time. (This does not affect MBCSs like UTF-8 and the Windows DBCSes which have non-ASCII lead bytes and always worked correctly.) o glm() now recalculates the null deviance whenever there is an offset (even if it is exactly zero to avoid a discontinuity in that case, since the calculations with and without offset are done by different algorithms). o Amongst families, quasi() accepted an expression for link and no other did. Now all accept an expression which evaluates to a one-element character vector (although e.g. 'logit' is taken as a name and not an expression). o trace() now accepts arguments where= and signature= for the old-style trace (no tracer or exit, edit==FALSE) and just prints a message on entry. Also the undocumented feature of where=function now works for generic functions as well. o callNextMethod() failed for recursive use when the methods had nonstandard argument lists. Now enforces the semantic rule that the inheritance is fixed when the method containing the callNextMethod() is installed. See Details in the documentation. o UseMethod() looked for the defining environment of 'generic' as if it were the current function, although some functions are generic for methods of a different generic. Lookup for S3 methods is confined to functions: previously a non-function 'fun.class' could have masked a function of the same name. o Line types (lty) specified as hex strings were documented not to allow zero, but some devices accepted zero and handled it in a device-dependent way. Now it is an error on all devices. (PR#8914) o Subassignment for a time series can no longer extend the series: it used to attempt to but failed to adjust the tsp attributes. Now window() must be used. o Function AIC() in package 'stats4' was not dispatching correctly on S4 classes via logLik() because of namespace issues. o Subsetting LANGSXPs could break the call-by-value illusion. (PR#7924) (patch from Kevin Hendricks). o parse() with n > 1 gave a syntax error if fewer than n statements were available. o parse() with n > 1 gave strange results on some syntax errors. (PR#8815) o lag.plot() now respects graphical parameters for the axes. o Using a wrong link in family() now gives more consistent error messages. o sort.list(method="radix") works on factors again. o object.size() is more accurate for vector objects (it takes into account the smaller header and also the fixed sizes used in the node classes for small vector objects). o addmargins(T, ...) now returns a "table" when 'T' is a "table", as its help page has always suggested. o remove() now explicitly precludes removing variables from baseenv() and throws an error (this was previously ignored). o Saving the workspace at the end of a session now works as has long been intended, that is it is saved only if something has been added/deleted/changed during the current session. o The search for bindings in <<-, ->> and assign(inherits=TRUE) was omitting the base package, although this was not documented. Now the base package is included (but most bindings there are locked). o dweibull(0, shape) was NaN not Inf for shape < 1. Also, the help for dgamma and dweibull gave support as x > 0, but returned non-zero values for x = 0. (PR#9080) o Subsetting arrays no longer preserves attributes (it was removed for matrices in 1998). o The "factor" method of as.character() no longer maps level "NA" to "" (a legacy of before there were NA character strings). o terms(keep.order=TRUE) was not returning a valid "order" attribute. o The DLL registration code was not freeing .External symbols. o The internet download routines expected URLs of less than 4096 bytes, but did not check. Now this is checked, and http:// URLs are allowed to be up to 40960 bytes. o parse(n=-1) threw a stack-imbalance error, and parse(n=3) did not cope correctly with EOF during input. o Zero-column data frames had no names (rather than character(0)). o by() and acf() could get confused when they used very long expressions as names. o residuals(, type="working") was NA for cases with zero weight (whereas they are well-defined even though the case was not used during the fitting) and the actual value is now returned. This allows residuals to be computed from fits with 'y = FALSE'. The residuals in a fitted "glm" object are computed more accurately: the previous formula was subject to cancellation. o loess() now checks the validity of its 'control' argument. o rownames(<0-row matrix>, do.NULL=FALSE) was wrong. (PR#9136) o apply() now works as documented when applied over 2 or more margins with one of zero extent. (It used to drop dimensions.) o head() and tail() now also work row-wise for "table" and "ftable" objects. o NextMethod() could throw an error/crash if called from a method that was called directly rather than from a generic (so .Method was unset). o order(x, na.last = NA) failed for a zero-length x. o grep(pat, x, value = TRUE, perl = L) preserved names for L == TRUE && !is.na(pat) but not otherwise. Now it always does. o [rc]bind() now find registered methods and not just visible ones. o Printing a factor no longer ignores attributes such as names and dim/dimnames. o Command-line arguments after --encoding were ignored. o The check for impossible confidence levels was off by one in wilcox.test (PR#8557) o [[ on an environment could create aliases. (PR#8457) o pt() with a very small (or zero) non-centrality parameter could give an unduly stringent warning about 'full precision was not achieved'. (PR#9171) o writeChar() could segfault if 'nchars' was given silly values. o qt() and rt() did not work for vector 'ncp', and qt() did not work for negative 'ncp'. o ns() failed to work correctly when 'x' was of length one. o identical() ignored tags on pairlists (including names of attributes) and required an identical ordering for attribute values in their pairlists. Now names are compared on pairlists, and attribute sets are treated as unordered. o If they were unused arguments supplied to a closure, only the first non-empty one was reported, despite the message. Unmatched empty arguments (such as f(1,,) for a function of one argument) were ignored. They are now an error. o Calling a builtin with empty arguments used to silently remove them (and this was undocumented). Now this is an error unless builtin is c() or list() or there are only trailing empty arguments, when it is a warning (for the time being: this will be made an error in R 2.5.0). o install.packages() ignored 'configure.args' if the vector was unnamed. o biplot() now works if there are missing values in the data. o biplot() now works passes par() values to all four axes (not just those on sides 1 and 2). o [.acf now handles an empty first index. o Deparsing uses backticks more consistently to quote non-syntactic names. o Assigning to the symbol in a for() loop with a list/expression/pairlist index could alter the index. Now the loop variable is explicitly read-only. (PR#9216) o Using old.packages() (and hence update.packages()) on an empty (or non-existent) library failed with an obscure message. o plot.xy() could segfault if supplied with an invalid 'col' argument. (PR#9221) o menu() with graphics=TRUE attempted to use Tcl/Tk on unix even if DISPLAY was not set (in which case Tk is not available and so the attempt is bound to fail). o The print() method for 'dist' objects prints a matrix even for n = 2. o The cumxxx functions were missing some PROTECTs and so could segfault on long vectors (especially with names or where coercion to numeric occurred). o The X11() device no longer produces (apparently spurious) 'BadWindow (invalid Window parameter)' warnings when run from Rcmdr. o legend() assumed that widths and heights of strings were positive, which they need not be in user coordinates with reversed axes. (In part, PR#9236) o The plot() methods for "profile.nls" objects could get confused if 'which' had been used in the profile() call. (PR#9231) o boxplot() did not passed named arguments (except graphics parameters) to bxp() as documented. (PR#9183) o Only genuinely empty statements act as 'return' in the browser, not say those starting with a comment char. (PR#9063) o summary.mlm() incorrectly used accessor functions to fake an "lm" object. (PR#9191) o prettyNum() was not preserving attributes, despite being explicitly documented to. (PR#8695) o It was previously undocumented what happened if a graphical parameter was passed in both '...' and 'pars' to boxplot() and bxp(), and they behaved differently. Now those passed in '...' have precedence in both cases. o A failed subassignment could leave behind an object '*tmp*'. The fix also sometimes gives better error messages. o Using SIGUSR1 on Unix now always terminates a session, and no longer is caught by browser contexts and restarts (such as try()). o In the 'graphics' package, in-line 'font=5' was being ignored (report by Tom Cook). o nls() looked for non-parameter arguments in a function call in the wrong scope (from the body of nls). o Printing of complex numbers could misbehave when one of the parts was large (so scientific notation was used) and the other was so much smaller that it had no significant digits and should have been printed as zero (e.g. 1e80+3e44i). o Using install.packages with type='mac.binary' and target path starting with ~ failed with a cryptic message while unpacking. ************************************************** * * * 2.3 SERIES NEWS * * * ************************************************** CHANGES IN R VERSION 2.3.1 patched BUG FIXES o help.search() incorrectly documented where the data base was saved and what was in it. o str(, strict.width=.) produced an extraneous first line. o Improve bessel[IJKY]() out-of-range checks; for instance, besselI(0, nu) no longer warns. o cbind() on some non-vector objects (e.g. names) segfaulted. o xy.coords(numeric(0)) gave a misleading error message. o INSTALL has been changed to avoid a few problems with the base (not XPG4) Solaris sed. o There were problems in src/main/printutils.c on some platforms that did not have va_copy. o [pq]unif allowed infinite ranges but handled them inconsistently. (PR#8958) [pq]unif claimed to allow min == max but did not do so. o Subassignment within raw arrays of 3 or more dimensions was not implemented. o environment<-() did not even check if duplication was required. o rt() was wrong for non-central t-distributions. qt() was wrong for non-central distributions far enough in the left tail (reported by Long Qu). (PR#9050) o R CMD Rdconv --type=Ssgm no longer drops a \keyword{} if it is the only one (one letter typo patch by Bill Dunlap). (PR#9051) o poly(x, y, .., raw = TRUE) now does follow 'raw'. o plot(0/ -1:1, type = "s") now works. (PR#9046) o write.table(row.names=FALSE) does now quote column names. (PR#9044) o rf() was wrong for non-central F (PR#9055). qf() was wrong for non-central F with denominator df > 1e8. o The C function dummy_vfprint had a potential memory leak. This showed up with some connections when used with output of more than 100,000 bytes in a single call. o vignette() did not work if more than one vignette with the same name was installed (PR#9069). o mget() did not check that 'ifnotfound' was a list, and worked incorrectly if it was a list of length > 1. Now 'ifnotfound' is (if possible) coerced to a list. o The internal check for conformance of time series assumed that the 'tsp' attribute was integer, whereas it was enforced to be numeric by the attribute-setting code. o Sweave() did not treat \begin{document} in comments correctly (PR#9073). o diff(x) gave wrong result when x was "POSIXlt" object. o title() could crash R when passed a long non-character vector. (PR#9115) o Functions rgb(), hsv() and hcl() lost names unless 'alpha' was specified. (In part, PR#9118) o The residuals() method for "glm" failed unless 'y = TRUE' for the fit: it now works for "working" and "partial" residuals and gives a useful error message for other types. (PR#9124) o R CMD Rdconv did not close the .Rd file, which matters on Windows. (PR#9126) o anova.mlm() could fail if applied to a single model. o stopifnot() now gives a better message for a *long* expression. CHANGES IN R VERSION 2.3.1 NEW FEATURES o In lm() and glm(), offsets are allowed to be length 1 (and if so are replicated to the number of cases). o The \uxxxx notation for Unicode characters in input strings can now be used on any platform which supports MBCS, even if the current locale is not MBCS (provided that the Unicode character is valid in the current character set). o The quasibinomial() family now allows the "cauchit" link. (PR#8851) o edit.data.frame() no longer (silently) coerces character columns to factor. C-LEVEL FACILITIES o The variables controlling stack checking are made available via Rinterface.h to front-ends embedding R: see 'Writing R Extensions' o R_SignalHandlers (defined in Rinterface.h) can be set to 0 to suppress the R signal handlers in front-ends embedding R. INSTALLATION CHANGES o There have been a number of changes to help installation on platforms that no one had beta-tested. - Changes related to older header files, e.g. on Redhat 8.0/9. - Problems with 'make install' on older (<3) versions of bash on Solaris and elsewhere. - AIX 5.2/gcc issues with needing -lm when making modules X11 and vfonts. - Some versions of Solaris and AIX had an fcntl.h that redefined 'open' to be 'open64' and thereby broke compilation of src/main/connections.c and elsewhere. o 'make uninstall' works better on a build using a named subarchitecture. BUG FIXES o min(), max(), sum() and prod() gave nonsensical answers with an empty list or raw argument. o sum() on a data frame did not allow multiple arguments. (PR#8385) o charmatch() and pmatch() did not specify they applied only to character vectors. Now they do, and attempt to coerce 'x' and 'target' to character before attempting matching. o The Summary() methods for data.frame, Date, POSIXct, POSIXlt and difftime all required an argument which can match 'x', although the generics did not. o regexpr() now accepts 0-length 'text' inputs. o help.search() no longer errors out on a wrongly installed package (with no "hsearch.rds" file). o The LaTeX version of the package reference manual was omitting some topics, and was not sorting the foo-package topic first. o Serializing (e.g. via save()) is better protected against C stack overflow, which will now abort the conversion but no longer crashes the R process on some platforms. o rbind()ing dataframes with a single row could lead to a corrupt data frame (a problem with the fix to PR#8506). o plot(lm(y ~ 1)) now works also for 'which = 5'. o dbeta(0, 1, a, 0) now correctly gives 'a' (limit) instead of 0, and dbeta(0, a, b, ncp) now returns Inf instead of NaN. o demo(Hershey) was failing on the Cyrillic octal codes in locales (e.g. UTF-8) in which these are invalid. o mean() on an integer (or logical) vector was treating NAs as actual values (unless na.rm = TRUE). o mean() on a complex vector was calculated incorrectly in code to improve precision (PR#8842, John Peters). o Graphical parameters bg, cex, col, lty, and lwd were being checked as being of length one even by functions such as title() that ignored them. (Functions such as lines() and points() allow them to be of length > 1, so they might be passed through ... to other high-level graphical functions which then used to reject them.) o str() now is fast again for large character vectors. o edit() would default the environment of a function to .BaseEnv, instead of to .GlobalEnv. o lm() and glm() coerce their 'weights' and 'offset' values to vector to avoid problems with specifying them as 1D or n x 1 arrays. o image() with one or both axes on log scales would give a spurious warning; contour() would give an error. o legend() with log axes would place the title in the wrong place. o edit.data.frame() was not returning factors edited with factor.mode="numeric" to factors. o edit.matrix() tried to set rownames and colnames from the original matrix even if the sizes had been altered, and ignored changes made to the column names. 'edit.row.names' has a more sensible default (if the rownames are non-NULL). o bindingIsLocked() was returning invalid values of a logical vector on some platforms. o merge.data.frame() did not make the column names unique (by appending elements of 'suffixes') when performing a Cartesian product. (PR#8676) o rbind.data.frame() matches up the names of columns (which was undocumented), but failed to do so when checking if it was dealing with a factor column. (PR#8868) If rbind() was used on data frames with duplicated names it produced a corrupt data frame. o dt(x, df, ncp= not.0) no longer gives erratic values for |x| < ~1e-12. (PR#8874) o \code{\linkS4class{.}} now works. o ccf() aligns time series by ts.intersect() rather than ts.union() and so is less likely to need a non-default na.action. (PR#8893) o optim(method="CG") could return a value that did not correspond to $par for very badly behaved functions on which the second phase of the line search failed. (PR#8786) o print.ts() could fail on a corrupt time series: it now warns and does the best it can. CHANGES IN R VERSION 2.3.0 USER-VISIBLE CHANGES o In the grid package there are new 'arrow' arguments to grid.line.to(), grid.lines(), and grid.segments() (grid.arrows() has been deprecated). The new 'arrow' arguments have been added BEFORE the 'name', 'gp' and 'vp' arguments so existing code that specifies any of these arguments *by position* (not by name) will fail. o all.equal() is more stringent, see the PR#8191 bug fix below. o The data frame argument to transform() is no longer called 'x', but '_data'. Since this is an invalid name, it is less likely to clash with names given to transformed variables. (People were getting into trouble with transform(data, x=y+z).) NEW FEATURES o arima.sim() has a new argument 'start.innov' for compatibility with S-PLUS. (If not supplied, the output is unchanged from previous versions in R.) o arrows() has been changed to be more similar to segments(): for example col=NA omits the arrow rather than as previously (undocumented) using par("col"). o as.list() now accepts symbols (as given by as.symbol() aka as.name()). o atan2() now allows one complex and one numeric argument. o The 'masked' warnings given by attach() and library() now only warn for functions masking functions or non-functions masking non-functions. o New function Axis(), a generic version of axis(), with Date and POSIX[cl]t methods. This is used by most of the standard plotting functions (boxplot, contour, coplot, filled.contour, pairs, plot.default, rug, stripchart) which will thus label x or y axes appropriately. o pbeta() now uses TOMS708 in all cases and so is more accurate in some (e.g. when lower.tail = FALSE and when one of the shape parameters is very small). o [qr]beta(), [qr]f() and [qr]t() now have a non-centrality parameter. o [rc]bind and some more cases of subassignment are implemented for raw matrices. (PR8529 and 8530) o The number of lines of deparsed calls printed by browser() and traceback() can be limited by the option "deparse.max.lines". (Wish of PR#8638.) o New canCoerce() utility function in "methods" package. o [pq]chisq() are considerably more accurate for moderate (up to 80) values of ncp, and lower.tail = FALSE is fully supported in that region. (They are somewhat slower than before.) o chol(pivot = TRUE) now gives a warning if used on a (numerically) non-positive-definite matrix. o chooseCRANmirror() consults the CRAN master (if accessible) to find an up-to-date list of mirrors. o cov.wt() is more efficient for 'cor = TRUE' and has a new 'method' argument which allows 'Maximum Likelihood'. o do.call() gains an 'envir' argument. o eigen() applied to an asymmetric real matrix now uses a tolerance to decide if the result is complex (rather than expecting the imaginary parts of the eigenvalues to be exactly zero). o New function embedFonts() for embedding fonts in PDF or PostScript graphics files. o fisher.test() now uses p-values computed via hypergeometric distributions for all 2 by 2 tables. This might be slightly slower for a few cases, but works much better for tables with some large counts. There is a new option to simulate the p-value for larger than 2 x 2 tables. o for() now supports raw vectors as the set of indices. o getNativeSymbolInfo() is vectorized for the 'name' argument. It returns a named list of NativeSymbolInfo objects, but is backward compatible by default when called with a character vector of length 1, returning the NativeSymbolInfo object. o help.search() no longer attempts to handle packages installed prior to R 2.0.0, and reports the current path to the package (rather than where it was originally installed: this information is not shown by the print() method). o Added "hexmode" to parallel "octmode". o install.packages() now does tilde expansion on file paths supplied as 'pkgs'. o install.packages() has additional arguments 'configure.args' and 'clean' which allow the caller to provide additional arguments to the underlying R CMD INSTALL shell command when installing source packages on a Unix-alike. o is.loaded() has a new argument 'type' to confine the search to symbols for .C, .Fortran, .Call or .External: by default it looks for a symbol which will match any of them. It is now internal and not primitive, so argument matching works in the usual way. o The symmetry test for matrices used in eigen() has been ``exported'' as the 'matrix' method of a new S3-generic 'isSymmetric(). o .leap.seconds and the internal adjustment code now know about the 23rd leap second on 2005-12-31: the internal code uses a run-time test to see if the OS does. o The 'col' argument of legend() now defaults to par("col") (which defaults to "black", the previous default), so that the lines/symbols are shown in the legend in the colour that is used on the plot. o log2() and log10() call C functions of the same name if available, and will then be more likely to be precise to machine accuracy. o new.packages() gains a ... argument to pass e.g. 'destdir' to install.packages(). (Wish of PR#8239.) o nls() now supports 'weights'. o The vector passed as the first argument of the 'fn' and 'gr' arguments of optim() has the names (if any) given to argument 'par'. o options(expressions) is temporarily increased by 500 during error-handling. This enables e.g. traceback() to work when the error is reaching the limit on the nesting of expressions. o page() accepts general R objects, not just names (and previously undocumented) character strings. This allows the object to be specified as a call, for example. More options are allowed in its '...' argument. o pairs() allows a wider class of inputs, including data frames with date and date-time columns. o par() and the in-line use of graphical parameters produce more informative error messages, distinguishing between non-existent pars and inappropriate use of valid pars. Graphical parameters 'family', 'lend', 'ljoin' and 'lmitre' can now be set in-line. There is no longer a warning if non-settable pars are used in-line, but there is an appropriate warning if unknown pars are passed. The length limit for the 'family' parameter has been increased to 200 bytes, to allow for the names of some CID-keyed fonts in multi-byte locales. o The pdf() device now allows 'family' to be specified in the same generality as postscript(). o The pdf() device writes /FontDescriptor entries for all fonts except the base 14, and does not write font entries for unused fonts. o Plotmath allows 'vartheta', 'varphi' and 'varsigma' (or 'stigma') as synonyms for 'theta1', 'phi1' and 'sigma1', and the help page has a note for TeX users. o plot.xy() now takes its default arguments from the corresponding par() settings, so points(type="l") and lines(type="p") behave in the same way (and more obviously, also for type="b"). o poly() has a new argument 'raw', mainly for pedagogical purposes. o The class "POSIXlt" now supports fractional seconds (as "POSIXct" has always done). The printing of fractional seconds is controlled by the new option "digits.secs", and by default is off. o postscript() supports family = "ComputerModernItalic" for Computer Modern with italic (rather than slanted) faces. o The postscript()/pdf() font metrics for the 14 standard fonts (only, not the rest of the common 35) have been updated to versions from late 1999 which cover more glyphs. There are also a few differences in the metrics and hence the output might be slightly different in some cases. o The way families can be specified for postscript() and pdf() has been expanded to include CID-keyed fonts, with new functions Type1Font() and CIDFont() to set up such fonts families. o prettyNum() has new arguments 'preserve.width' and 'zero.print'. When the former is not "none", as in calls from format() and formatC(), the resulting strings are kept at the desired width when possible even after adding of 'big.mark' or 'small.mark'. o proc.time() and system.time() now record times to 1ms accuracy where available (most Unix-like systems). o The initialization methods for the quasi() family have been changed to depend on the variance function, and in particular to work better for the "mu(1-mu)" variance function. (PR#8486) o read.table() gains a 'flush' argument passed to scan(). o require() now takes a 'lib.loc' argument. o The second argument 'size' to sample() is required to have length 1, so that errors when supplying arguments are more easily detected. o The default is now compress = !ascii in save() (but not save.image). o scan() and write.table() now have some interruptibility, which may be useful when processing very large files. o A new heuristic test, seemsS4Object() is supplied, along with a similar C-level test, R_seemsS4Object(object). The test detects probable S4 objects by their class's attribute. See the help page. o S3 classes can now be made non-virtual S4 classes by supplying a prototype object in the arguments to setOldClass(). o splinefun() returns a function that now also has a 'deriv' argument and can provide up to the 3rd derivative of the interpolating spline, thanks to Berwin Turlach. o stopifnot(A) now gives a better error message when A has NAs, and uses "not all TRUE" when A has length >= 2. o str()'s default method has a new argument 'strict.width' which can be used to produce strict 'width' conforming output. A new options(str = list(strict.width = *)) setting allows to control this for a whole session. o summary.nls() has a new argument 'correlation' that defaults to FALSE (like summary.lm). o Sys.sleep() has sub-millisecond resolution on Unix-alikes with gettimeofday(). o Sys.time() now has sub-millisecond accuracy on systems supporting the POSIX call gettimeofday, and clock-tick accuracy on Windows. o The new function timestamp() adds a time stamp to the saved command history on consoles which support it. o New function tcrossprod() for efficiently computing x %*% t(x) and x %*% t(y). o The suffix used by tempfile() is now in hex on all platforms and guaranteed to be at least 6 hex digits (usually 8). o trace() now works more consistently and more like its documentation, in particular the assertions about old tracing being removed for new. For debugging purposes (of R) a mechanism for debugging the trace computations themselves was added. See trace.R. o The implementation of trace() has beem made more general by calling a function to do the trace interaction, and recover() now detects trace calls to trim the irrelevant code underneath. o unserialize() can now also read a byte stream from a raw vector. o The useDynLib() directive in the NAMESPACE file now accepts the names of the native/foreign symbols that are to be resolved in the DLL for use in .C/.Call/.Fortran/.External calls. These can be used as regular R variables instead of the (routine name, PACKAGE) pairs currently recommended. Alternative names can be given for the R variables mapping to these symbols. The native routine registration information can also be used directly via useDynLib(name, .registration = TRUE). See the 'Writing R Extensions' manual for more details. checkFF() (package 'tools') has been updated accordingly. o validObject() has an option complete=TRUE that recursively checks the objects in the slots. Not used when new(...) checks validity. o New Vectorize() function, a wrapper for mapply(). o write.ftable() has gained an argument 'append = FALSE' (thanks to Stephen Weigand). o On Unix-alikes, X11() now has arguments to request the initial position of the window, and 'gamma' defaults to the value of getOptions("gamma"). These changes are consistent with the windows() device. o X11() and the Unix-alike data entry window can have properties (including geometry) set by X resources: see their help files. o xy.coords() & xyz.coords() now have NULL defaults for their 'y' or 'y' and 'z' arguments. This is more consistent with their earlier documentation, and may be convenient for using them. o Non-syntactic names of list elements are now printed quoted by backticks rather than double quotes. o There is some basic checking for imminent C stack overflow (when the evaluation depth and the user interrupts are checked). On systems with suitable OS support (not Windows), segfaults from C stack overflow are caught and treated as an R error. New function Cstack_info() reports on stack size and usage. options(expressions) reverts to the default of 5000 now stack checking is in place. o Package tcltk does not try to initialize Tk on Unix-alikes unless a DISPLAY variable is present. This allows packages dependent on tcltk to be installed without access to an X server. o The code used to guess timezone offsets where not supplied by the OS uses a different algorithm that is more likely to guess the summer-time transitions correctly. o Package tools contains translation tables 'Adobe_glyphs' and 'charset_to_Unicode'. o Changed the environment tree to be rooted in an empty environment, available as emptyenv(). baseenv() has been modified to return an environment with emptyenv() as parent, rather than NULL. o gettext has been updated to 0.14.5. o PCRE has been updated to version 6.4. o The method $.DLLInfo resolves the specified symbol in the DLL, returning a NativeSymbolInfo object. Use [[ to access the actual values in the DLLInfo object. o On systems with either vasprintf or both va_copy and a vsnprintf which reports the size of buffer required, connections such as gzfile() and bzfile() can now write arbitrarily long lines, not just 100000 chars. o The R session temporary directory is now set in C code using the same algorithm whether or not the shell front-end is used and on all platforms. This looks at environment variables TMPDIR, TMP and TEMP in turn, and checks if they point to a writable directory. o Some of the classical tests put unnecessary restrictions on the LHS in the formula interface (e.g., t.test(x+y ~ g) was not allowed). o On suitably equipped Unix-alike systems, segfaults, illegal operations and bus errors are caught and there is a simple error-handler which gives the user some choice as to what to do in interactive use. [Experimental.] On Windows access violations and illegal instructions are caught with a simple error handler. [Experimental.] o Tracebacks now include calls such as .C/.Fortran/.Call, which will help if errors occur in R code evaluated by compiled code and in tracebacks presented by the segfault etc handlers. o Treatment of signature objects and method definition objects has been modified to give cleaner printing and more consistency in the treatment of signatures. A sometimes useful utility, methodSignatureMatrix(), is now exported. o Printing the results of codoc() from package tools now helpfully summarizes the found code/documentation mismatches. o R refrains from printing a final EOL upon exiting the main loop if the quiet flag is on and if the save action is known (e.g. this is true for --slave). DEPRECATED & DEFUNCT o The deprecated and undocumented use of atan() with two arguments has been removed: instead use atan2(). o write.table0() is defunct in favour of write.table(). o format.char() is defunct in favour of format.default(). o Support for the long-deprecated (and no longer documented) arguments --min-vsize --min-nsize --max-vsize --max-nsize --vsize --nsize of R CMD BATCH has been removed. o The 'debian' subdirectory has been removed from the sources. o The 'vfont' argument of axis() and mtext() has been removed: use par(family=) instead. o The unused graphical parameter "type" has been removed: it invited confusion with the 'type' argument to default methods of plot(), points() and lines(). o nlsMethod() and profiler() are no longer exported from the stats namespace (and nlsMethod.plinear() is no longer registered as a method, as nlsMethod() was not generic). o The re-named tcltk functions tkcmd, tkfile.tail, tkfile.dir, tkopen, tkclose, tkputs, tkread are now formally deprecated. o Argument 'col' of bxp() is now formally deprecated. o Use of NULL as an environment is deprecated and gives a warning. o postscriptFont() is deprecated in favour of Type1Font() (which is just a change of name). o La.chol() and La.chol2inv() are deprecated (they have since R 1.7.0 been the same as the default options of chol() and chol2inv). o La.svd(method = "dgesvd") is deprecated. o The use of install.R and R_PROFILE.R files in packages is deprecated: use the DESCRIPTION file instead to arrange to save an image or to load dependent packages. The following command-line options to INSTALL are deprecated (use the fields in the DESCRIPTION file instead): -s --save --no-save --lazy --no-lazy --lazy-data --no-lazy-data o Graphical parameter 'tmag' (which is long unused) is deprecated. INTERNATIONALIZATION A set of patches supplied by Ei-ji Nakama has been incorporated. o New postscript encodings for CP1253, CP1257 and Greek (ISO 8859-7). o Support for East Asian CID-keyed fonts in pdf() and postscript(). Although these usually contain Latin characters no accurate AFMs are available and so CID-keyed fonts are intended only for use with CJK characters. o Wide-character width functions wc[s]width are provided that overcome problems found with OS-supplied ones (and those previously used by R on Windows). This means that double-width CJK characters are now supported on all platforms. It seems that the width of some characters (and not just CJK characters) depends on which CJK locale's fonts are in use and also on the OS. Revised wide-character classification functions are provided for use on Windows, AIX and MacOS X to replace deficient OS-supplied ones. o There is support for MBCS charsets in the pictex() graphics device, and rotated (by 90 degrees) text may work better. o The \u (and \U except on Windows) notation for characters which is supported by the parser in all MBCS charsets is now always interpreted as a Unicode point, even on platforms which do not encode wchar_t in Unicode. These are now a syntax error in single-byte locales. o The default encoding for postscript() and pdf() is chosen to be suitable for the current locale, if that is a single-byte locale which is supported. This covers European (including Greek) and Cyrillic languages. In UTF-8 locales, a suitable single-byte encoding is chosen for postscript() and pdf(), and text translated to it. o xfig() gains an 'encoding' argument. o There are some message translations into Spanish. INSTALLATION CHANGES o The encoding files for pdf()/postscript() have been moved to directory 'enc' in package 'grDevices'. o Support for MBCS is only enabled if iconv is found and it supports enough conversions. (libiconv does.) o In an MBCS locale, make check now translates the graphics examples from Latin-1. This ensures that they will work correctly in UTF-8: it is possible that in other MBCS locales they will now fail (rather than work completely incorrectly). o There is a new test, 'test-Docs', which as part of 'make check-devel' tests the code in the documentation. Currently it runs doc/manual/R-{exts,intro}.R and the compiled code in R-exts.c. o The workaround to allow an external LAPACK-containing BLAS such as libsunperf to be used with the internal LAPACK has been removed. If you have such a library you may now need to use --with-lapack. It is no longer possible to use some older versions of libsunperf, e.g. Forte 7 on 64-bit builds. o A substitute for mkdtemp is provided, so it is now always used for R_TempDir. o Most of the functions checked for by 'configure' also have declarations checked for in the appropriate header. o The top-level documentation files AUTHORS COPYING.LIB COPYRIGHTS FAQ RESOURCES THANKS have been moved to doc, and COPYING and NEWS are installed there. The file Y2K has been removed from the distribution. o The extension .lo is no longer used in building R (only in the optional build of libRmath.so): this allows a considerable simplification of the Makefiles. o Direct support for f2c has been removed: it can still be used via a script which makes it look like a Fortran compiler. (src/scripts/f77_f2c is an example of such a script.) o There is a new flag SAFE_FFLAGS which is used for the compilation of dlamc.f. It is set by configure for known problem cases (recent g77 and gfortran), but can be overridden by the user. o The standard autoconf macros for large-file support are now used, and these are enabled unless --disable-largefile is specified. This replaces --enable-linux-lfs (and is now selected by default). o Visibility attributes are used where supported (gcc4/gfortran on some platforms, also gcc3/g77 on FC3 and partially elsewhere). The main benefit should be faster loading (and perhaps better optimized code) in some of the dynamic shared objects (e.g. libR.so and stats.so). o The *PICFLAGS are taken to be -fpic rather than -fPIC where possible. This will make no difference on most platforms: -fPIC is needed on Sparc (and still used there), but -fpic should give slightly better performance on PowerPC (although -fPIC is used on PPC64 as it is needed to build libR.so there). o More use is made of inlining for small utility functions such as isReal. Because this can only be done portably with C99 constructs (and we know of no actual implementation), this is only done for the GNU C compiler. o There is an experimental feature to allow shared installations of sub-architectures. See the R-admin manual. o All platforms now use R's internal implementation of strptime, which allows fractional seconds. (The major platforms were already using it.) o The dlcompat work-around for old Mac OS X systems (<= 10.2) has been removed. External dlcompat must be installed if needed. UTILITIES o R CMD check now uses an install log by default. o R CMD check works for packages whose package name is different from the directory name in which it is located. o R CMD INSTALL now uses more randomness in the temporary directory name even on systems without mktemp -d. o R CMD f77 has been removed now f2c is no longer supported. o The version string shown in the startup message and by "R --version", and that stored in variable R.version.string are now in exactly the same format. o The base name of a help file needs to be valid as part of a file:// URL, so R CMD check now checks the names are ASCII and do not contain % . o R CMD check now warns about unknown sections in Rd files, and invalid names for help, demo and R files, as well as unlikely file names in the 'src' directory. The latter is controlled by option --check-subdirs and by default is done if checking a tarball without a configure script. R CMD build excludes invalid files in the 'man', 'R' and 'demo' subdirectories. o \usepackage[noae]{Sweave} in the header of an Sweave file supresses auto-usage of the ae package ("almost European" fonts) and T1 input encoding. DOCUMENTATION o Rd format now allows \var{} markup inside \code{} and \examples{}. o Markup such as --, ---, < and > is handled better when converting .Rd files to [C]HTML. o There is new markup \link[=dest]{name} to generate a link to topic 'dest' which is shown as 'name', and \linkS4class{abc} which expands to \link[=abc-class]{abc}, for cross-referencing the recommended form of documentation for S4 classes. PACKAGE INSTALLATION o There is now some support for Fortran 90/95 code in packages: see `Writing R Extensions'. o Installation of man sources and demos is now done by R code. The restrictions on the names of help files, R files and of demos are now enforced (see `Writing R Extensions'). o Packages which contain compiled code can now have more than one dot in their name even on Windows. o The Meta/hsearch.rds database saved now contains LibPath="". This information is now always recreated when help.search() is run, but the field is retained for back-compatibility. o update.packages() now has a '...' argument to be passed to install.packages(), including the formerly separate arguments 'destdir' and 'installWithVers'. o Make macros AR and RANLIB are now declared in etc/Makeconf for use by packages which wish to make static libraries. C-LEVEL FACILITIES o qgamma and rgamma in Rmath.h now check for non-positive arguments. o The BLAS which ships with R now contains the complete set of double-complex BLAS routines, rather than just those used in R. has been corrected to add the missing double-precision BLAS functions drotmg and drotm, and to exclude lsame (which is a Lapack auxiliary function and is now declared in ). It also includes the double complex routines added for this release of R provided Fortran doublecomplex is usable on the platform. o and now declare all the entry points as 'extern'. o The flag SAFE_FFLAGS is made available to packages via etc/Makeconf and R CMD config. It can be used where optimization needs to be defeated, e.g. in LAPACK setup. o getNativeSymbolInfo has a withRegistrationInfo argument which causes the address field to be a reference to the registration information if it is available for that symbol. If the registration information is not available, the address is a reference to the native symbol. The default is FALSE which is backward compatible, returning just the address of the symbol and ignoring registration information. o errorcall and warningcall are now declared in (they might be needed in front-ends). o R_FlushConsole and R_ProcessEvents are now declared in . o The R_Sock* functions supporting socket connections are no longer declared in R-ftp-http.h as they are not loaded into R itself, and are now hidden in the module's DLL on suitable systems. BUG FIXES o Quoted arguments to the R script after --args are now passed quoted to the R executable and so will be shown as expected by commandArgs(). (They were previously split at whitespace even inside quotes on Unix-alikes but not on Windows.) o axis() now supports pars 'xaxp'/'yaxp' as inline arguments. o sort() now does not return inappropriate attributes such as "dim" and "tsp": it only returns names. sort(x, partial=) no longer returns unsorted names, and drops names (since it is supplied for efficiency). o Use of non-central F in pf() gives accurate values for larger ncp. o R CMD build --binary does a better job of cleaning up after failure to re-make vignettes. o reg-test-1.R tested system(intern=TRUE) which depends on popen and so is not supported on all platforms. o Changed apparent mis-spelling of "Gibraltar" in dataset 'eurodist'. o sysconf() is now used to find the number of clock ticks/second: under some circumstances glibc reported CLK_TCK = 60 when the true value was 100. o identical() was not allowing for embedded nuls in character strings. (NB: the comparison operators including == do not, and never will.) o The profile() and profiler() methods for "nls" objects now support algorithm = "plinear" and algorithm = "port". o The signal handlers for signals USR1 and USR2 where not restored if the signal arrived when interrupts were suspended. o Certain combinations of S4 inheritance could cause inherited methods to override some directly specified methods. o Some cases of named signatures in calls to setMethod() caused errors. o all.equal() is now more consistent and "picky" about mismatching attributes, in particular names(); this is a part of the propositions by Andy Piskorkski (PR#8191). o load() when applied to a connection leaves it open/not as it found it, and checks explicitly for having a binary readable connection. o The p-values given by stat.anova() (called from several anova() methods) are now NA (rather than spurious) if non-nested models give rise to changes in deviance with a different sign from changes in degrees of freedom. o Built-ins were reported as the relevant call in C-level error()s iff R profiling was in progress. Now they are never reported. o Too-long signatures (with no names) were not being caught in setMethod(). o Slot names in prototype() are being more thoroughly checked. o signif() is more likely to follow the 'round to even' rule for exactly representable numbers, e.g. signif(0.25, 1). (Related to PR#8452.) o nls() now works correctly with some low-dimensional fits, e.g. with one or zero non-linear parameters. o glm() could give an inappropriate error message if all possible coefficients were invalid (e.g. a log-linear binomial model with no intercept and a not all positive predictor). o solve() gives clearer error messages for some incorrect usages. (PR#8494 and similar) o The gaussian() family was missing the 'valideta' component (which could be needed for the "inverse" link function). The starting values supplied by the gaussian family could be invalid for the "log" and "inverse" link functions. This is now reported. o data.matrix() did not work correctly on zero-row data frames. (PR#8496 and other problems.) o The DSC comments in the files from postscript(onefile=FALSE) now label all files as having page 1 of 1, as some other software seems to expect that. o The axis labels chosen for logarithmic axis are now less likely to be linear and inappropriate (when the range is more than 10 and less than 100). (PR#1235) o Staircase lines (types "s" and "S") are now drawn continuously rather than a point at a time and so line types, mitring and so on work. (PR#2630) o Calling par(mfg) before doing any plotting resulted in NewPage never being called on the device, which in turn resulted in incorrect output for postcript() and pdf() devices. (Reported by Marc Schwartz in discussion of the non-bug PR#7820.) o terms.formula needed to add parentheses to formulae with terms containing '|'. (PR#8462) o pbirthday() and qbirthday() now also work for very improbable events {those you are typically *not* interested in}. o Only source help files starting with an upper- or lower-case letter or digit and extension .Rd or .rd are documented to be processed. This is more liberal in that starting with a digit is now also allowed, but rule is now enforced. o nls(algorthm="port") was always taking positive numeric differences and so could exceed the upper bounds. o methods:::.asEnvironmentPackage() was not allowing for versioned installs. o .find.package() now reports which package(s) it cannot find in the case it stops with an error. o The standard Unix-alike version of file.show() gives an informative message if it cannot open a file rather than the (possibly incorrect) 'NO FILE'. o window() did not allow non-overlapping ranges with extend = TRUE. (PR#8545) o pbinom(size = 0) now returns correct values (not NaN). (PR#8560) o [dp]binom(x, *) for x < 0 now always returns 0. (PR#8700) analogous change in pgeom(), pnbinom() and ppois(). o [dqpr]geom and [dpqr]nbinom() now all consistently accept prob = 1 but not prob = 0. qgeom(prob=1) now gives the correct values (not -1). o INSTALL on Unix-alikes was not loading dependent packages when preparing for lazy-loading. o qcauchy(1) now gives +Inf instead of just a very large number. o df(0, f1, *) now properly returns Inf, 1, or 0 for f1 < , = , or > 2. o qbinom(), qnbinom() and qpois() now use a better search and normally reach the answer very quickly when it is large (instead of being slow or infinite-looping). o pt(x, df) lost accuracy in the far tails (when |x| > 1e154) for small df (like df = 0.001 for which such extremes are not unlikely). o dbeta(x, a, b) underflowed internally and incorrectly gave 0 for very small x and a. o None of the warnings about convergence failures or loss of precision in nmath (distribution and special functions) were being reported to the R user. o dnt was missing from standalone nmath (under Unix-alikes). o split() now accepts factors with numeric (but not storage mode integer) codes. o The utilities such as 'check' now report active version numbers again, as SVN 'last changed revision' numbers. o addmargins() did not accept a name for 'FUN', only an expression. o '+' for POSIXt objects now takes the tzone from whichever object has it, so date+x is the same as x+date if x is numeric. o mean.default() and var() compute means with an additional pass and so are often more accurate, e.g. the variance of a constant vector is (almost) always zero and the mean of such a vector will be equal to the constant value to machine precision. (PR#1228) sum(), prod(), mean(), rowSums() and friends use a long double accumulator where available and so may be more accurate. (This is particularly helpful on systems such as Sparc and AMD64 where long double gives considerably greater exponent range and precision than double.) o read.dcf() now gives a warning on malformed lines. o add1.[g]lm now try harder to use the environment of the formula in the orginal fit to look for objects such as the 'data' and 'subset' arguments. o gaussian()$aic was inconsistent with e.g. the lm results from AIC() and extractAIC() for weighted fits: it treated the weights as case weights and not variance factors. o system() on Unix-alikes ignored non-logical values of 'intern' and treated 'intern = NA' as true. o as.table() now produces non-NA rownames when converting a matrix of more than 26 rows. (PR#8652) o Partial sorting used an algorithm that was intended only for a few values of 'partial' and so could be far slower than a full sort. It now switches to a barebones full sort for more than 10 values of 'partial' and uses a more efficient recursive implementation for 2...10. o summary.glm() returned an estimate of dispersion of Inf for a gaussian glm with zero residual degrees of freedom and then treated that as a known value. It now uses the estimate NaN, which is consistent with summary.lm(). o Sys.sleep() on Unix-alikes was restricted to about 2147 seconds and otherwise might never have returned. (PR#8678) o is(obj, Cl) could wrongly report TRUE when Cl was a classUnion and multiple inheritance was involved. o confint[.lm / .default] used label "100 %" for level = 0.999 o Empty entries (i.e., extraneous ",") in NAMESPACE files now give a better error message early at parsing time instead of a less comprehensible one later at load time. o all.equal(n1, n2) could erroneously return NA when n1, n2 contained large integers. o anova.mlm() didn't handle multi-df effects properly in the single-model case (PR#8679) o anova.mlm() had its colnames mangled by data.frame() (needed check.names=FALSE). o summary.glm() gave an NA estimate of dispersion for fits with zero weights. (PR#8720) o qhyper() had too small a tolerance for right-continuity on some platforms so was not always an inverse to phyper(). o rownames<-.data.frame() and dimnames<-.data.frame() tested the length(s) of the replacement value(s) before coercion, which can change the length (e.g. for class "POSIXlt"). o max() and min() ignored the largest/smallest representable integer, as well as Inf/-Inf. (PR#8731) o write.table() assumed factors had integer codes: it now allows malformed factors with numeric codes (and otherwise throws an error). o Worked around a Solaris restriction which meant that Sys.sleep() was only effective for times of up to one second. o sink(, split=TRUE) now works correctly, but is allowed only on platforms that support va_copy or __va_copy. (PR#8716) o factanal(), prcomp() and princomp() now only check that columns in the model frame that will be used are numeric (they previously also checked columns which were part of negative terms in the formula). o Misuse of $ in apply could corrupt memory. (PR#8718) o apply() could fail if the function returned NULL (e.g. if there was a single row). o registerS3method() failed due to a typo. (It was almost never used.) o Registering an S3 method for an S3 generic in another package that was converted to an S4 generic in the same package as the S3 method, registered the method in the wrong place. o Recall() used lookup for the function in use and so could fail if that was an S3 method not on the search path. o Rdconv -t Ssgm failed if it encountered \link[opt]{arg}. o uniroot() did not give a warning (as documented) if it failed to converge in 'maxiter' steps. (PR#8751) o eapply() (and as.list.environment()) did not work for the base environment/namespace. (PR#8761) o Added protection in configure against systems for which using xmkmf fails to report a C or C++ compiler. o expand.grid() was constructing a data frame 'by hand' and so setting integer row.names (which are documented to be character). It now sets character row names, and row.names.data.frame() coerces to character. o qbeta() used == on volatile doubles for its convergence test, which failed with gcc 3.3.x on ix86 Linux. We now use a less fragile test (and lose a negligible amount of accuracy). o ls.str() was missing inherits=FALSE, and so could have reported on an object of the same name but a different mode in the enclosure of the given environment. o logLik.nls assumed that sigma^2 had been estimated, but did not count this in the 'df' attribute. ************************************************** * * * 2.2 SERIES NEWS * * * ************************************************** CHANGES IN R VERSION 2.2.1 patched INSTALLATION CHANGES o The macro SOCKLEN_T has been replaced by R_SOCKLEN_T to work around a problem with the headers of AIX 5.3. BUG FIXES o sub(fixed = TRUE) could get wrong the length of the character string for elements of the result after the first. o legend() worked out which elements of 'lty' were valid before resizing 'lty', and so could fail if 'lty' was a different length from 'legend'. o str() sometimes used much too many spaces (in 2.2.x). o eigen(eispack=TRUE) accessed areas off the matrix in some circumstances (some asymmetric matrices with both complex conjugate pair and real eigenvalues). o strptime() in 2.2.1 sometimes did not set $isdst when it was previously set. o Another case of infinite influence has been worked around. (An addendum to PR#8367.) o qr.coef() worked incorrectly with multiple rhs in the LAPACK-using cases. (PR#8476/8) o rbind.data.frame() gave a corrupt data frame if one of the named arguments was a zero-row data frame. (PR#8506) o Checks for NULL in the rho argument of the C-level findVar function have been added. o The C-level substitute function was handling NULL in its 'rho' argument incorrectly. o The code for pgamma() introduced in 2.1.0 failed for large values of 'shape' where the previous code was perfectly acceptable, despite the claim to be uniformly better. For example, pgamma(0.9e100, 1e100) was NaN. (PR#8528) o There was no command 'ls' in browser() nor 'next' in debug(), despite the documentation (which has been corrected). Command 'where' in the browser() no longer changes to step-though mode. o factor.scope() could report incorrectly that interaction terms were not in the upper scope when such terms in the model and the upper scope had different orders for the main effects. (Another manifestation of PR#7842.) o The "lm" method of drop1() was giving incorrect results for weighted fits (since deviance.lm() was called on a non-"lm" object). o dotchart() was miscalculating the space for the labels in the left margin. (PR#8681) o r <- glm(.....); all.equal(r,r) # now gives TRUE instead of an error o plot.acf() with a multiple time series was sometimes miscalculating the 'ylim' value for the plot after the first. (PR#8705) CHANGES IN R VERSION 2.2.1 USER-VISIBLE CHANGES o options("expressions") has been reduced to 1000: the limit of 5000 introduced in 2.1.0 was liable to give crashes from C stack overflow. NEW FEATURES o Use of 'pch' (e.g. in points) in the symbol font 5 is now interpreted in the single-byte encoding used by that font. Similarly, strwidth now recognizes that font 5 has a different encoding from that of the locale. (These are likely to affect the answer only in MBCS locales such as UTF-8.) o The URW font metrics have been updated to versions from late 2002 which cover more glyphs, including Cyrillic. o New postscript encodings for CP1250 (Windows East European), ISO Latin-7 (8859-13, Latvian, Lithuanian and Maori), Cyrillic (8859-5), KOI8-R, KOI8-U and CP1251. o configure has more support for the Intel and Portland Group compilers on ix86 and x86_64 Linux. o R CMD INSTALL will clean up if interrupted (e.g. by ctrl-C from the keyboard). o There is now a comprehensive French translation of the messages, thanks to Philippe Grosjean, Frederic Lehobey, Jean Thioulouse and Emmanuel Paradis. DEPRECATED & DEFUNCT o The undocumented use of atan() with two arguments is deprecated: instead use atan2() (as documented). o The 'vfont' argument of axis() and mtext() is deprecated (it currently warns and does nothing). o The function mauchley.test() is deprecated (was a misspelling) and replaced by mauchly.test() BUG FIXES o The malloc's of AIX and OSF/1 which return NULL for size 0 are now catered for in src/main/regex.c. o Names of list elements which are missing are now printed as $ and not $"NA" (which is how the non-missing name "NA" is printed). (Brought up in discussion of PR#8161.) o help.start() was not linking R.css for use by its front page and immediate links (2.2.0 only). o Indexing by character NA matched the name "NA". o The arith-true test used random inputs and did not set the seed, so it could fail very occasionally. o arima() with 'fixed' supplied and p=0 for the non-seasonal part could give spurious warnings about 'some AR parameters were fixed'. o summary.matrix() could give an infinite recursion on some classed objects (e.g. those of class "Surv"). o The 255th character in an 8-bit character set was not handled correctly as a letter on some platforms where C char is signed: for example it was printed as \377 and not allowed in variable names. (Spotted by Alexey Shipunov in Russian encodings.) o Conversion from POSIXct to POSIXlt is done more accurately around the change of DST in years not supported by the OS (pre-1970 on Windows and some others, and in the far past or future). o chisq.test(cbind(1:0, c(7,16)), simulate.p = TRUE) gave wrong P-values on some platforms. (PR#8224) o pdf() was not writing details of the encoding to the file correctly. (Spotted by Alexey Shipunov in Russian encodings.) o image() was failing with an error when plotting a matrix of all NA values. (PR#8228) image() could fail if called with add=FALSE (the default) and length(x)=1 for either x or y, as it uses the plot coordinates of the previous plot (if any). o tools::checkMD5sums was not accepting file names with spaces in. o The plot() method for TukeyHSD() needed updating after adding adjusted p-values. (PR#8229) o read.fwf() did not work for header = TRUE. (PR#8226) o diag() failed when its argument had NA values in its dimnames. o [g]sub(pcre=TRUE) did not work correctly with \U and \L in a UTF-8 locale, even on the example on the help page. o promptMethods() was failing if the "methods" argument was supplied. o is.loaded() now finds Fortran symbols whether or not the registration mechanism has been used. o ISODateTime() mistakenly corrected non-existent times (when DST was being started) in the current time zone. o Some replacement operations on data frames gave incorrect answers, e.g. DF[3:4, "y"] if column "y" did not exist or was a matrix. o getGraphicsEvent() would cause memory corruption if passed an empty prompt. o qr() and chol() now pivot the colnames of the result when pivoting is used. (PR#8258) o example(points) omitted pch=0, although it was valid and said in the text to be illustrated. o plot.default() had an unused 'lab' argument, thereby preventing the 'lab' graphics parameter being passed through '...' . o Although polygon(col = NA) was the stated default, specifying NA was not equivalent to omitting the argument (but col=NULL was equivalent). o Im(-1) was pi. (PR#8272, a side effect from all previous versions of R returning the same value for Im and Arg of non-complex numbers.) o symbols(fg) defaulted to colour 1, not par("col") as documented. It does now defaults to par("col"). o par("family") did not check the length of the value (up to 49 bytes) and so could segfault. o aggregate.ts() did not allow for rounding in frequencies such as 1/5. o prcomp(tol=) was not dropping the sdev's corresponding to dropped columns. o Subassignment of a vector which increased the length of the vector _and_ had the wrong length of replacement could occasionally segfault. (This has been there since at least mid 1997.) o The registration of .Fortran symbols was broken: these could only be looked up if there were also .Call symbols registered! o R CMD build was incorrectly rejecting the recommended form of name for a translation package, 'Translation-ll'. (PR#8314) o numericDeriv() gave nonsense results unless the variables were real, which was not checked. o predict.prcomp() would sometimes give an error when predicting a single observation. (PR#8324) o mapply() could segfault if MoreArgs was not a list. (PR#8332) o The arith-true test used identical() on floating-point results, and this allowed a failure when the relative difference was less than .Machine$double.eps but non-zero. o qbinom() was not accepting p = -Inf when log.p = TRUE, although it is a legitimate value. o write.csv[2] only accepted logical constants for 'row.names', and now accepts variables. o Conversion of .Rd files did not correctly match braces enclosing a whole argument, e.g. \eqn{{\bf a}}{a}. o The C function pythag (used if hypot was not available) would infinite-loop on systems with effective optimizing compilers. o Writing long formats (more than 1000 bytes) with connections that use dummy_vfprintf could fail on some systems. The limit has been changed to 100000 bytes pending a more complete fix in R 2.3.0. o Making in src/nmath/standalone without making R was not making Rmath.h. o Both the R front-end and INSTALL could find the attempted temporary directory name already in use on platforms without mktemp (and a genuine Bourne shell /bin/sh, not bash). Now both the process ID and a timestamp are used to create the directory name. o [dpqr]gamma now return NaN for an invalid 'shape' parameter (rather than throw an error), for consistency with other distribution functions. o t() now longer drops dimnames 'list(NULL,NULL)' or 'list(NULL)'. o Influence measures such as rstandard() and cooks.distance() could return infinite values rather than NaN for a case which was fitted exactly. Similarly, plot.lm() could fail on such examples. plot.lm(which = 5) had to be modified to only plot cases with hat < 1. (PR#8367) lm.influence() was incorrectly reporting 'coefficients' and 'sigma' as NaN for cases with hat = 1, and on some platforms not detecting hat = 1 correctly. o Rmath.h for standalone Rmath was not recording HAVE_WORKING_LOG, so R_log was not available on platforms defining it. o HoltWinters() was using a slightly incorrect formula in the C code. o dir.create() could be confused by a trailing slash on the path, and by paths containing drives on Windows. o The search for tcl/tkConfig.sh looked in 'lib' before 'lib64' directories (and not at all in /usr/local/lib64) and so might prefer 32- to 64-bit versions if both are available. o nlminb() used an uninitialized variable unless bounds were supplied, and so failed on 64-bit Solaris. CHANGES IN R VERSION 2.2.0 USER-VISIBLE CHANGES o plot() uses a new default 'which = 5' for the fourth panel when 'which' is not specified. o The SVN revision number will appear after the date in the welcome message. The date shown is now the date of the last change to the sources rather than the date the sources were prepared. o is.null(expression()) now returns FALSE. Only NULL gives TRUE in is.null(). o graphics::xy.coords, xyz.coords and n2mfrow have been moved to the grDevices name space (to be available for grid as well). graphics::boxplot.stats, contourLines, nclass.*, and chull have been moved to the grDevices name space. The C code underlying chull() has been moved to package grDevices. o split(x, f), split<-() and unsplit() now by default split by all levels of a factor f, even when some are empty. Use split(x, f, drop = TRUE) if you want the old behavior of dropping empty levels. split() and split<-() are S3 generic functions with new arguments 'drop' and '...' and all methods now should have 'drop' and '...' arguments as well. o The default for 'allowEscapes' in both read.table() and scan() has been changed to FALSE. o The default for 'gcFirst' in system.time() is now TRUE. NEW FEATURES o .Platform has a new component 'path.sep', the separator used between paths in environment variables such as PATH and TEXINPUTS. o anova.mlm() now handles the single-model case. o Hexadecimal values are now allowed for as.numeric() and as.integer() on all platforms, and as integer constants in R code. o attach() now prints an information message when objects are masked on the search path by or from a newly attached database. o axis() now returns 'at' positions. o axis() has a new argument 'hadj' to control horizontal adjustment of labels. o axis.Date() and axis.POSIXct() now accept a 'labels' argument (contributed by Gavin Simpson). o barplot() now has arguments 'log = ""' and 'add = FALSE' (as in barplot2() from package 'gplots'). o baseenv() has been added, to return the base environment. This is currently still NULL, but will change in a future release. o boxplot() now responds to supplying 'yaxs' (via bxp()). (Wish of PR#8072.) o capabilities() has a new component 'NLS'. o cbind() and rbind() now react to 'deparse.level' = {0,1,2} (as in another system not unlike R). o Experimental versions of cbind() and rbind() in methods package, based on new generic function cbind2(x,y) and rbind2(). This will allow the equivalent of S4 methods for cbind() and rbind() --- currently only after an explicit activation call, see ?cbind2. o New functions cdplot() and spineplot() for conditional density plots and spine plots or spinograms. Spine plots are now used instead of bar plots for x-y scatterplots where y is a factor. o checkDocFiles() in package 'tools' now checks for bad \usage lines (syntactically invalid R code). o The nonparametric variants of cor.test() now behave better in the presence of ties. The "spearman" method uses the asymptotic approximation in that case, and the "kendall" method likewise, but adds a correction for ties (this is not necessary in the Spearman case). o The X11 dataentry() now has support for X Input Methods (contributed by Ei-ji Nakama). o density() is now an S3 generic where density.default() {former density()} has new argument 'weights' for specifying observation masses different than the default 1/N -- based on a suggestion and code from Adrian Baddeley. o download.packages() now carries on if it encounters a download error (e.g. a repository with a corrupt index). o dump() now skips missing objects with a warning rather than throw an error. o Added "POSIXlt" methods for duplicated() and unique(). o Function encoded_text_to_latex() in package tools translates Latin 1,2,9 and UTF-8 encoded character vectors to LaTeX escape sequences where appropriate. o encodeString() allows justify = "none" for consistency with format.default(). Some argument names have been lengthened for clarity. o file(), fifo() and pipe() now (if possible) report a reason if they fail to open a connection. o format.default() now has a 'width' argument, and 'justify' can now centre character strings. format.default() has new arguments 'na.encode' to control whether NA character strings are encoded (true by default), and 'scientific' to control the use of fixed/scientific notation for real/complex numbers. How format() works on a list is now documented, and uses arguments consistently with their usage on an atomic vector. o format.info() now has a 'digits' argument, and is documented to work for all atomic vectors (it used to work for all but raw vectors.). o New function glob2rx() for translating `wildcard' aka `globbing' to regular expressions. o There is a new function gregexpr() which generalizes regexpr() to search for all matches in each of the input strings (not just the first match). o [g]sub() now have a 'useBytes' argument like grep() and regexpr(). o [g]sub(perl = TRUE) support \L and \U in the replacement. o iconv() has been moved from 'utils' to 'base'. o identify()'s default method has additional arguments 'atpen' and 'tolerance' (following S). o KalmanForecast() and KalmanLike() now have an optional argument fast=FALSE to prevent their arguments being modified. o Exact p-values are available in ks.test() for the one-sided and two-sided one-sample Kolmogorov-Smirnov tests. o labels() now has a method for "dist" objects (replacing that for names() which was withdrawn in 2.1.0). o library() now explicitly checks for the existence of directories in 'lib.loc': this avoids some warning messages. o loadNamespace(keep.source=) now applies only to that namespace and not others it might load to satisfy imports: this is now consistent with library(). o match.arg() has a new argument 'several.ok = FALSE'. o max.col() has a new argument for non-random behavior in the case of ties. o memory.profile() now uses the type names returned by typeof() and no longer has two unlabelled entries. o methods() now warns if it appears to have been called on a non-generic function. o The default mosaicplot() method by default draws grey boxes. o nlminb(), similar to that in S-PLUS, added to package 'stats'. o New algorithm "port" (the nl2sol algorithm available in the Port library on netlib) added to the nls() function in the 'stats' package. o object.size() now supports more types, including external pointers and weak references. o options() now returns its result in alphabetical order, and is documented more comprehensively and accurately. (Now all options used in base R are documented, including platform-specific ones.) Some options are now set in the package which makes use of them (grDevices, stats or utils) if not already set when the package is loaded. o New option("OutDec") to set the decimal point for output conversions. o New option("add.smooth") to add smoothers to a plot, currently only used by plot.lm(). o pie() has new optional arguments 'clockwise' and 'init.angle'. o plot.lm() has two new plots (for 'which' = 5 or 6), plotting residuals or cook distances versus (transformed) leverages - unless these are constant. Further, the new argument 'add.smooth' adds a loess smoother to the point plots by default, and 'qqline = TRUE' adds a qqline() to the normal plot. The default for 'sub.caption' has been improved for long calls. o R.home() has been expanded to return the paths to components (which can as from this version be installed elsewhere). o readbin() and writeBin() now support raw vectors as well as filenames and connections. o read.dcf() can now read gzipped files. o read.table() now passes 'allowEscapes' to scan(). o sample(x, size, prob, replace = TRUE) now uses a faster algorithm if there are many reasonably probable values. (This does mean the results will be different from earlier versions of R.) The speedup is modest unless 'x' is very large _and_ 'prob' is very diffuse so that thousands of distinct values will be generated with an appreciable frequency. o scatter.smooth() now works a bit more like other plotting functions (e.g., accepts a data frame for argument 'x'). Improvements suggested by Kevin Wright. o signif() on complex numbers now rounds jointly to give the requested number of digits in the larger component, not independently for each component. o New generic function simulate() in the 'stats' package with methods for some classes of fitted models. o smooth.spline() has a new argument 'keep.data' which allows to provide residuals() and fitted() methods for smoothing splines. o Attempting source(file, chdir=TRUE) with a URL or connection for 'file' now gives a warning and ignores 'chdir'. o source() closes its input file after parsing it rather than after executing the commands, as used to happen prior to 2.1.0. (This is probably only significant on Windows where the file is locked for a much shorter time.) o split(), split<-(), unsplit() now have a new argument 'drop = FALSE', by default not dropping empty levels; this is *not* back compatible. o sprintf() now supports asterisk `*' width or precision specification (but not both) as well as `*1$' to `*99$'. Also the handling of `%' as conversion specification terminator is now left to the system and doesn't affect following specifications. o The plot method for stl() now allows the colour of the range bars to be set (default unchanged at "light gray"). o Added tclServiceMode() function to the tcltk package to allow updating to be suspended. o terms.formula() no longer allows '.' in a formula unless there is a (non-empty) 'data' argument or 'allowDotAsName = TRUE' is supplied. We have found several cases where 'data' had not been passed down to terms() and so '.' was interpreted as a single variable leading to incorrect results. o New functions trans3d(), the 3D -> 2D utility from persp()'s example, and extendrange(), both in package 'grDevices'. o TukeyHSD() now returns p-values adjusted for multiple comparisons (based on a patch contributed by Fernando Henrique Ferraz P. da Rosa). o New functions URLencode() and URLdecode(), particularly for use with file:// URLs. These are used by e.g. browse.env(), download.file(), download.packages() and various help() print methods. o Functions utf8ToInt() and intToUtf8() to work with UTF-8 encoded character strings (irrespective of locale or OS-level UTF-8 support). o [dqp]wilcox and wilcox.test work better with one very large sample size and an extreme first argument. o write() has a new argument 'sep'. o write.csv[2] now also support row.names = FALSE. o The specification of the substitutions done when processing Renviron files is more liberal: see ?Startup. It now accepts forms like R_LIBS=${HOME}/Rlibrary:${WORKGRP}/R/lib . o Added recommendation that packages have an overview man page -package.Rd, and the promptPackage() function to create a skeleton version. o Replacement indexing of a data frame by a logical matrix index containing NAs is allowed in a few more cases, in particular always when the replacement value has length one. o Conversion of .Rd files to latex now handles encoding more comprehensively, including some support for UTF-8. o The internal regex code has been upgraded to glibc-2.3.5. Apart from a number of bug fixes, this should be somewhat faster, especially in UTF-8 locales. o PCRE has been updated to version 6.2. o zlib has been updated to version 1.2.3. o bzip2 has been updated to version 1.0.3. o Complex arithmetic is now done by C99 complex types where supported. This is likely to boost performance, but is subject to the accuracy with which it has been implemented. o The printing of complex numbers has changed, handling numbers as a whole rather than in two parts. So both real and imaginary parts are shown to the same accuracy, with the 'digits' parameter referring to the accuracy of the larger component, and both components are shown in fixed or scientific notation (unless one is entirely zero when it is always shown in fixed notation). o Error messages from .C() and .Fortran(), and from parsing errors, are now more informative. o The date and date-time functions work better with dates more than 5000 years away from 1970-01-01 (by making dubious assumptions about the calendar in use). o There is now a traditional Chinese translation, and a much more extensive Russian translation. DEPRECATED & DEFUNCT o Capability "IEEE754" is defunct. o loadURL() is defunct: use load(url()). o delay() is defunct: use delayedAssign() instead. o The 'CRAN' argument to update.packages(), old.packages(), new.packages(), download.packages() and install.packages() is defunct in favour of 'repos'. o write.table0() is deprecated in favour of the much faster write.table(). o format.char() is deprecated in favour of format.default(). o R_HOME/etc/Rprofile is no longer looked for if R_HOME/etc/Rprofile.site does not exist. (This has been undocumented since R 1.4.0.) o CRAN.packages() is deprecated in favour of available.packages(). o Rd.sty no longer processes pre-2.0.0 conversions containing \Link. o The stubs for the defunct device GNOME/gnome have been removed. o print.matrix() (which has been identical to print.default since R 1.7.0) has been removed. INSTALLATION o LDFLAGS now defaults to -L/usr/local/lib64 on most Linux 64-bit OSes (but not ia64). The use of lib/lib64 can be overridden by the new variable LIBnn. o The default installation directory is now ${prefix}/${LIBnn}/R, /usr/local/lib64/R on most 64-bit Linux OSes and /usr/local/lib/R elsewhere. o The places where the doc, include and share directory trees are installed can be specified independently: see the R-admin manual. o We now test for wctrans_t, as apparently some broken OSes have wctrans but not wctrans_t (which is required by the relevant standards) . o Any external BLAS found is now tested to see if the complex routine zdotu works correctly: this provides a compatibility test of compiler return conventions. o Installation without NLS is now cleaner, and does not install any message catalogues. o src/modules/lapack/dlamc.f is now compiled with -ffloat-store if f2c/gcc are used, as well as if g77 is used. o All the Fortran code has been checked to be fully F77 compliant so there are no longer any warnings from F95 compilers such as gfortran. o The (not-recommended) options --with-system-zlib, --with-system-bzlib and -with-system-pcre now have 'system' in the name. o If a Java runtime environment is detected at configure time its library path is appended to LD_LIBRARY_PATH or equivalent. New Java-related variables JAVA_HOME (path to JRE/JDK), JAVA_PROG (path to Java interpreter), JAVA_LD_PATH (Java library path) and JAVA_LIBS (flags to link against JNI) are made available in Makeconf. o Ei-ji Nakama was contributed a patch for FPU control with the Intel compilers on ix86 Linux. MAC OS X INSTALLATION o --with-blas="-framework vecLib" --with-lapack and --with-aqua are now the default configure options. o The default framework version name was changed to not contain the patch level (i.e. it is now 2.2 instead of 2.2.0). Also it can be overridden at configure time by setting FW_VERSION to the desired name. o The Rmath stand-alone library is now correctly installed inside the R.framework if R was configured as a framework. In addition, make install-Rmath-framework will install a stand-alone Rmath framework in /Library/Frameworks (unless overridden by RMATH_FRAMEWORK_DIR specifying full framework path and name including the .framework extension). PACKAGE INSTALLATION o The encoding for a packages' 00Index.html is chosen from the Encoding: field (if any) of the DESCRIPTION file and from the \encoding{} fields of any Rd files with non-ASCII titles. If there are conflicts, first-found wins with a warning. o R_HOME/doc/html/packages.html is now remade by R not Perl code. This may result in small changes in layout and a change in encoding (to UTF-8 where supported). o The return value of new.packages() is now updated for any packages which may be installed. o available.packages() will read a compressed PACKAGES.gz file in preference to PACKAGES if available on the repository: this will reduce considerably the download time on a dialup connection. The downloaded information about a repository is cached for the current R session. o The information about library trees found by installed.packages() is cached for the current session, and updated only if the modification date of the top-level directory has been changed. o A data index is now installed for a package with a 'data' dir but no 'man' dir (even though it will have undocumented data objects). o contrib.url path for type="mac.binary" has changed from bin/macosx/ to bin/macosx//contrib/ where corresponds to R.version$arch UTILITIES o checkFF() used by R CMD check has since R 2.0.0 not reported missing PACKAGE arguments when testing installed packages with namespaces. It now - treats installed and source packages in the same way. - reports missing arguments unless they are in a function in the namespace with a useDynLib declaration (as the appropriate DLL for such calls can be searched for). o Rd2dvi sets the encoding(s) used appropriately. If UTF-8 encoding is used, latex >= 2003/12/01 is required. o codoc() allows help files named pkg_name-defunct.Rd to have undocumented arguments (and not just base-defunct.Rd). C-LEVEL FACILITIES o C function massdist() {called from density()} has new argument 'xmass' (= weights). o Raw vectors passed to .C() are now passed as unsigned char * rather than as SEXPs. (Wish of Keith Frost, PR#7853) o The search for symbols in a .C/.Call/... call without a package argument now searches for an enclosing namespace and so finds functions defined within functions in a namespace. o R_max_col() has new (5th) argument '*ties_meth' allowing non-random behavior in the case of ties. o The header files have been rationalized: the BLAS routine LSAME is now declared in BLAS.h not Linpack.h, Applic.h no longer duplicates routines from Linpack.h, and Applic.h is divided into API and non-API sections. o memory.c has been instrumented so that Valgrind can track R's internal memory management. To use this, configure using --with-valgrind-instrumentation=level where level is 1 or 2. Both levels will find more bugs with gctorture(TRUE). Level 2 makes Valgrind run extremely slowly. o Some support for raw vectors has been added to Rdefines.h. o R_BaseEnv has been added, to refer to the base environment. This is currently equal to R_NilValue, but it will change in a future release. BUG FIXES o %/% has been adjusted to make x == (x %% y) + y * ( x %/% y ) more likely in cases when extended-precision registers were interfering. o Operations on POSIXct objects (such as seq(), max() and subsetting) try harder to preserve time zones and warn if inconsistent time zones are used. o as.function.default() no longer asks for a bug report when given an invalid body. (PR#1880, PR#7535, PR#7702) o Hershey fonts and grid output (and therefore lattice output) now rescale correctly in fit-to-window resizing on a Windows graphics device. Line widths also scale now. o Plotmath has more support for multibyte characters (contributed by Ei-ji Nakama). o The X11() device now hints the window manager so that decorations appear reliably under e.g. the GNOME WM (contributed by Ei-ji Nakama). o Subsetting a matrix or an array as a vector used to attempt to use the row names to name the result, even though the array might be longer than the row names. Now this is only done for 1D arrays when it is done in all cases, even matrix indexing. (Tidies up after the fix to PR#937.) o Constants in mathlib are declared 'const static double' to avoid performance issues with the Intel Itanium compiler. o The parser checks the format of numeric constants more thoroughly so for example '123E-' is no longer valid. o contourLines() no longer requires an open device (used to start a device unnecessarily). Fix suggested by Barry Rowlingson. o capabilities() used partial matching but was not documented to: it no longer does so. o kernel(1,0) printed wrongly; kernel(, *) now returns a named kernel in all cases; plot(kernel(.),..) is more flexible. o qgamma(1,s) didn't give +Inf for some s. o installed.packages() and download.packages() now always return a matrix as documented, possibly with 0 rows (rather than a 0-length character vector or NULL). o Arithmetic operations on data frames no longer coerce the names to syntatically valid names. o Units are now properly recycled in grid layouts when 'widths' or 'heights' are shorter than the number of columns or rows (PR#8014). o DF <- data.frame(A=1:2, B=3:4); DF[1, 1:3] <- NULL gave a wrong error message. o spline()/spinefun()'s C code had a memory access buglet which never lead to incorrect results. (PR#8030) o sum() was promoting logical arguments to double not integer (as min() and other members of its group do). o loess() had a bug causing it to occasionally miscalculate standard errors (PR#7956). Reported by Benjamin Tyner, fixed by Berwin Turlach. o library(keep.source=) was ignored if the package had a namespace (the setting of options("keep.source.pkgs") was always used). o hist.POSIXct() and hist.Date() now respect par("xaxt"). o The 'vfont' argument was not supported correctly in title(), mtext(), and axis(). The 'vfont' argument is superseded by the par(family=) approach introduced in 2.0.0. This bug-fix just updates the warning messages and documentation to properly reflect the new order of things. o The C-level function PrintGenericVector could overflow if asked to print a length-1 character vector of several thousand characters. This could happen when printing a list matrix, and was fatal up to 2.1.1 and silently truncated in 2.1.1 patched. o What happened for proc.time() and system.time() on (Unix-alike) systems which do not support timing was incorrectly documented. (They both exist but throw an error.) Further, systen.time() would give an error in its on.exit expression. o weighted.residuals() now does sensible things for glm() fits: in particular it now agrees with an lm() fit for a Gaussian glm() fit. (PR#7961). o The 'lm' and 'glm' methods for add1() took the weights and offset from the original fit, and so gave errors in the (dubious) usage where the upper scope resulted in a smaller number of cases to fit (e.g. by omitting missing values in new variables). (PR#8049) o demo() had a 'device' argument that did nothing (although it was documented to): it has been removed. o Setting new levels on a factor dropped all existing attributes, including class "ordered". o format.default(justify="none") now by default converts NA character strings, as the other values always did. o format.info() often gave a different field width from format() for character vectors (e.g. including missing values or non-printable characters). o axis() now ensures that if 'labels' are supplied as character strings or expressions then 'at' is also supplied (since the calculated value for 'at' can change under resizing). o Defining S4 methods for "[" had resulted in changed behavior of S3 dispatch in a very rare case which no longer happens. o Fixed segfault when PostScript font loading fails, e.g., when R is unable to find afm files (reported by Ivo Welch). o R CMD BATCH now also works when does not end in a newline on Unix-alike platforms. o terms.formula() got confused if the 'data' argument was a list with non-syntactic names. o prompt() and hence package.skeleton() now produce *.Rd files that give no errors (but warnings) when not edited, much more often. o promptClass() and promptMethods() now also escape "%" e.g. in '%*%' and the latter gives a message about the file written. o wilcox.test() now warns when conf.level is set higher than achievable, preventing errors (PR#3666) and incorrect answers with extremely small sample sizes. o The default (protection pointer) stack size (the default for '--max-ppsize') has been increased from 10000 to 50000 in order to match the increased default options("expressions") (in R 2.1.0). o The R front-end was expecting --gui=tk not Tk as documented, and rejecting --gui=X11. o Rdconv -t latex protected only the first << and >> in a chunk against conversion to guillemets. o callNextMethod() and callGeneric() have fixes related to handling arguments. o ls.diag() now works for fits with missing data. (PR#8139) o window.default() had an incorrect tolerance and so sometimes created too short a series if 'start' or 'end' were zero. o Some (fairly pointless) cases of reshape left a temporary id variable in the result (PR#8152) o R CMD build used 'tar xhf' which is invalid on FreeBSD systems (and followed tar chf, so there could be no symbolic links in the tarball). o Subassignment of length zero vectors to NULL gave garbage answers. (PR#8157) o Automatic coercion of raw vectors to lists was missing, so for a list (or data frame) z, z[["a"]] <- raw_vector did not work and now does. This also affected DF$a <- raw_vector for a data frame DF. o The internal code for commandArgs() was missing PROTECTs. o The width for strwrap() was used as one less than specified. o R CMD INSTALL was not cleaning up after an unsuccessful install of a non-bundle which was not already installed. ************************************************** * * * 2.1 SERIES NEWS * * * ************************************************** CHANGES IN R VERSION 2.1.1 patched BUG FIXES o runmed(x, k = -1) now gives an error instead of a seg.fault. o File creation errors in pdf(), postscript(), xfig() resulted in a pointer being freed twice. (Reported by Matt McCall) o model.matrix(~ .^2, data=foo) now works as most people would expect (it used to expand '.' after using the a^2 = a rule). o ftable() and xtabs() had a check for interactions that would not work correctly with '.' in the formula. o The formula method for pairs() was ignoring the na.action argument. o scan() with the default separator (only) was stripping backslashes inside quoted string inputs even if allowEscapes = FALSE. o The "col" parameter to pairs() is now treated consistently with plot(): it affects the data, not the axes. (Patch submitted by Olaf Mersmann) o Sweave failed for \Sexpr{character(0)}. Sweave-test-1.Rnw contained a print() statement that is no longer needed. o Typo meant that R_alloc was limited to 2^31 not 2^34 on 64-bit builds of R. o pgamma(Inf, shape) did not terminate for shape = 1.1 and some other values (but not all) (PR#8001). This affected pchisq(Inf, df1) and pf(Inf, df1, Inf) for some values of df1. o regexpr("[a-z]", ...) could cause a buffer overrun with multi-byte character sets, leading to random errors later. o Installing a package with a 'data' directory which contains files but those files generate no objects (e.g. the BioC package makecdfenv) created an incorrectly formatted data index that data(package="pkg") could not read. o density(1/(0:2)) now works again (PR#8033). o make.names() was not respecting the allow_=FALSE argument. o Arg(-1) now gives pi, not 0; Arg(0i + -1) always worked. o --enable-linux-lfs had been broken at 2.1.0. o Printing was not allowing for double-width characters in its layout. o axTicks() is now also correct for reverse axis. (PR#7973) o signif() rounded some numnbers near 1e-308 to the wrong number of places (this showed up in the print-tests.R), and made unnecessary rounding errors on some platforms on e.g. signif(18000, 3). o window() was sometimes failing incorrectly due to representation errors when the new and old deltat were not both integers (e.g. multiples of 0.1). o The 'lm' methods for add1() and drop1() ignored offsets (which were added for lm() after they written). (PR#8049) o atan2(0+1i, 0+0i) was incorrectly NA (from a typo in complex.c). o The POSIXct method for as.Date() was rounding part days before 1970-01-01 upwards rather than discarding them. o qpois() was using an incorrect starting point and so could be unnecessarily slow for large lambda. (PR#8058) o Formatting of complex numbers with nsmall > 0 could be incorrect (and was in print-tests.Rout) because of a typo. o The test for new levels when predicting using model.frame() sometimes reported levels that were not actually used. o order(c("5","6",NA,"4",NA), na.last=FALSE) was incorrect. o Coercion to raw could give spurious messages about discarding imaginary parts. Coercion of a list to raw was behaving inconsistently for out-of-range values (and not warning). o cor.test(method = "spearman") gave NA p-values for _very_ long vectors. (PR#8087) o Switching to the Mersenne-Twister RNG could cause a segfault on first use. A user-supplied RNG without user_unif_{nseed,seedloc} was being re-initialized at each call. o Reading very short tables from stdin() with read.table would fail because of a typo. CHANGES IN R VERSION 2.1.1 NEW FEATURES o bug.report() now reports the locale in use. o upgrade.packageStatus() allows user input "c" to cancel the upgrade, just as update.packages() does. o glm() now accepts 1D arrays (e.g. tables) as a response, dropping them to a vector whilst preserving names. o df() with one infinite df now works (to match pf()). o Added tclServiceMode() function to the tcltk package to allow updating to be suspended. o The Encoding: field of a DESCRIPTION file is now documented, and used by packageDescription() and library(help=). o There has been progress on translations: existing translations have been revised and expanded, and French and Korean have been added. The Windows installer supports a wide range of languages for installation. BUG FIXES o lm(qr=FALSE) now works. o predict.glm() not longer loses names for "response" predictions. (PR#7792) o Typo in menu(graphics=TRUE) meant it failed on Unix if tcltk was not available. o When names.dist() was removed, the result of cmdscale() lost its rownames. The example also lost the labels. o R CMD check assumed 'tar' was GNU tar and so supported -z. o read.table() was not handing escaped quotes inside quoted fields in the first five lines of the file. (PR#7789) It was also not handling correctly EOF in the first five lines when reading from stdin(). (PR#7772) o 'make uninstall' was incomplete. o make.packages.html() called by help.start() was failing if there were installed packages with help titles invalid in the current locale. o printCoefmat(signif.legend = FALSE) was non-functional. (PR#7802) o Some as.date.frame() methods failed because the expression deparsed into multiple lines. (PR#7808) o setRepositories() had a typo. (PR#7810) o Printing arrays/data frames with multibyte characters in the column labels was sometimes misaligned or using excessive space. (PR#7803) o The Tcl/Tk console did not support multibyte characters. o as.POSIXlt() could give infinite recursion if passed a corrupt "POSIXct" object (generated by an incorrect call to c.POSIXct, PR#7826). o update.packages() was not passing 'type' correctly to install.packages(). o Printing the result of an unbalanced model.tables() call sometimes got confused if terms() had rearranged interaction terms. (PR#7829) o .Platform$pkgType was wrong on the CRAN MacOS X build, and .install.macbinary() was missing. o as.personList() as used by citation() got confused by names containing "and". (PR#7797) o Subscripting an array by a matrix containing zero or negative values or the wrong number of columns was not handled consistently. (PR#7824) o select.list(multiple=TRUE) now detects and tries again for invalid text input. o add1.[g]lm could give strange results with interaction terms when the model and the upper scope had different orders for the main effects. (PR#7842) o A bug had sneaked into the anova.mlmlist() code, affecting the Greenhouse-Geisser epsilon. Code wrongly assumed a matrix to be symmetric. (Thanks to Bela Bauer.) o anova.mlmlist() and mauchley.test() are now more tolerant to rank deficiency in the M and X matrices (also when they are implicitly generated via model.matrix()). o anova.mlm had a scoping issue (PR#7898) o pf() with infinite df is allowed again. It is now more accurate for extreme ratios of dfs, especially when there is a non-centrality parameter. o df() was inaccurate for large df (1e16 or greater). o dt() was inaccurate for large df (1e9 or greater) with a non-centrality parameter. o runmed(*, algorithm="Turlach") seg.faulted in rare cases. o strwrap() now makes a reasonable job of text that is invalid in the current locale. o Reading with encoding "UCS-2LE" will remove any Byte Order Mark, as most implementations of iconv fail to handle BOMs (which are present in 'Windows Unicode' files). o unique() for a list was incorrectly reporting `unimplemented'. o The parser's contextstack was not protected against overflow, e.g. more than 50 unmatched '('. (PR#7859) o source(file, chdir = TRUE) was not checking that 'file' was a filepath (rather than a URL). For 2.1.0 only, it did not work even if 'file' was a filepath. o Hershey fonts were being sized based on pixels not points so came out too small on devices where pixels were noticeably different from points (e.g., win.printer() and high-resolution screens). Fix means that default size of Hershey fonts may be slightly different, for example, smaller by default on PostScript and PDF. o The branch cuts in the complex versions of the inverse trigonometric and hyperbolic functions were non-standard. (PR#7871) o truncate() on file() connections was limited to files < 2Gb. It now works for larger files at least on 64-bit OSes and others where ftruncate supports such files. (Related to PR#7879) o proj.aovlist() did not work correctly on objects fitted from a data frame with row names. o The coding standards recommendations had nuke-trailing-whitespace where newer versions of ESS need ess-nuke-trailing-whitespace. (PR#7888) o package.skeleton() missed the first newline in the DESCRIPTION file. o pbirthday() reported p = 1 too often when coincident > 2. o plot(1:3, exp(1:3), log = "y", ylim = c(30,1)) {reversed log-scale axis} now works, based on Uwe Ligges' suggestions. (PR#7894) o install.packages() was aborting when a package in a bundle was chosen from a menu. It failed if more than one package in a bundle was chosen from the command line. o qcauchy() suffered from underflow in the extreme tails. (PR#7902) o Printing of raw matrices/arrays was not implemented. (PR#7912) o getCallingDLL()'s default first argument did not correspond to its description and has been changed. The mismatch caused symbols in .C/.Call/.Fortran calls without a PACKAGE= argument to be potentially looked up in the wrong namespace. o Binary save() of raw vectors was not working correctly on big-endian platforms. (PR#7812) o as.Date.factor() now accepts a format argument. o Workaround added for FreeBSD which does not have alloca.h _and_ does not allow alloca() to be declared. o identify() now respects 'cex'. (PR#660) Warnings from identify() are now printed immediately even on consoles with delayed printing. CHANGES IN R VERSION 2.1.0 USER-VISIBLE CHANGES o box plots {by boxplot() or bxp()} now have the median line three times the normal line width in order to distinguish it from the quartile ones. o Unix-alike versions of R can now be used in UTF-8 locales on suitably equipped OSes. See the internationalization section below. o The meaning of 'encoding' for a connection has changed: See the internationalization section below. o There has been some rationalization of the format of warning/error messages, to make them easier to translate. Generally names of functions and arguments are single-quoted, and classes double-quoted. o Reading text files with embedded "\" (as in Windows file names) may now need to use scan(* , allowEscapes = FALSE), see also below. NEW FEATURES o %% now warns if its accuracy is likely to be affected by lack of precision (as in 1e18 %% 11, the unrealistic expectation of PR#7409), and tries harder to return a value in range when it is. o abbreviate() now warns if used with non-ASCII chars, as the algorithm is designed for English words. o The default methods for add1() and drop1() check for changes in the number of cases in use. The "lm" and "glm" methods for add1() quoted the model on the original fitted values when using (with a warning) a smaller set of cases for the expanded models. o Added alarm() function to generate a bell or beep or visual alert. o all/any() now attempt to coerce their arguments to logical, as documented in the Blue Book. This means e.g. any(list()) works. o New functions for multivariate linear models: anova.mlm(), SSD(), estVar(), mauchley.test() (for sphericity). vcov() now does something more sensible for "mlm" class objects. o as.data.frame.table() has a new argument 'responseName' (contributed by Bill Venables). o as.dist() and cophenetic() are now generic, and the latter has a new method for objects of class "dendrogram". o as.ts() is now generic. o binomial() has a new "cauchit" link (suggested by Roger Koenker). o chisq.test() has a new argument 'rescale.p'. It is now possible to simulate (slowly) the P value also in the 1D case (contributed by Rolf Turner). o choose(n,k) and lchoose(.) now also work for arbitrary (real) n in accordance with the general binomial theorem. choose(*,k) is more accurate (and faster) for small k. o Added colorRamp() and colorRampPalette() functions for color interpolation. o colSums()/rowSums() now allow arrays with a zero-length extent (requested by PR#7775). o confint() has stub methods for classes "glm" and "nls" that invoke those in package MASS. This avoids using the "lm" method for "glm" objects if MASS is not attached. confint() has a default method using asymptotic normality. o contr.SAS() has been moved from the 'nlme' package to the 'stats' package. o New function convertColors() maps between color spaces. colorRamp() uses it. o The cov() function in the non-Pearson cases now ranks data after removal of missing values, not before. The pairwise-complete method should now be consistent with cor.test. (Code contributed by Shigenobu Aoki.) o Added delayedAssign() function to replace delay(), which is now deprecated. o dir.create() has a new argument 'recursive' serving the same purpose as Unix's mkdir -p. o do.call() now takes either a function or a character string as its first argument. The supplied arguments can optionally be quoted. o duplicated() and unique() now accept "list" objects, but are fast only for simple list objects. o ecdf() now has jumps of the correct size (a multiple of 1/n) if there are ties. (Wished by PR#7292). o eff.aovlist() assumed orthogonal contrasts for any term with more than one degree of freedom: this is now documented and checked for. Where each term only occurs in only one stratum the efficiencies are all one: this is detected and orthogonal contrasts are not required. o New function encodeString() to encode character strings in the same way that printing does. o file("clipboard") now work for reading the primary selection on Unix-alikes with an active X11 display. (It has long worked for reading and writing under Windows.) The secondary selection can also be read: see ?file. file() now allows mode "w+b" as well as "w+". o file.append() has been tuned, including for the case of appending many files to a single file. o Functions flush.console() and select.list() are now available on all platforms. There is a Tcl/Tk-based version of select.list() called tk_select.list() in package tcltk. o gc() now reports maximum as well as current memory use. o A new function getGraphicsEvent() has been added which will allow mouse or keyboard input from a graphics device. (NB: currently only the Windows screen device supports this function. This should improve before the 2.1.0 release.) o New functions gray.colors()/grey.colors() for gray color palettes. o grep(), gsub(), sub() and regexpr() now always attempt to coerce their 'pattern', 'x', 'replacement' and 'text' arguments to character. Previously this was undocumented but done by [g]sub() and regexpr() for some values of their other arguments. (Wish of PR#7742.) o gsub/sub() have a new 'fixed' method. o New function hcl() for creating colors for a given hue, chroma and luminance (i.e. perceptual hsv). o isTRUE() convenience function to be used for programming. o kmeans() now returns an object of class "kmeans" which has a print() method. Two alternative algorithms have been implemented. If the number of centres is supplied, it has a new option of multiple random starts. o The limits on the grid size in layout() are now documented, and have been raised somewhat by using more efficient internal structures. o legend() now accepts positioning by keyword, e.g. "topleft", and can put a title within the legend. (Suggested by Elizabeth Purdom in PR#7400.) o mahalanobis() now has a '...' argument which is passed to solve() for computing the inverse of the covariance matrix, this replaces the former 'tol.inv' argument. o menu() uses a multi-column layout if possible for more than 10 choices. menu(graphics = TRUE) is implemented on most platforms via select.list() or tk_select.list(). o New function message() in 'base' for generating "simple" diagnostic messages, replacing such a function in the 'methods' package. o na.contiguous() is now (S3) generic with first argument renamed to 'object'. o New function normalizePath() to find canonical paths (and on Windows, canonical names of components). o The default in options("expressions") has been increased to 5000, and the maximal settable value to 500000. o p.adjust() has a new method "BY". o pbeta() now uses a different algorithm for large values of at least one of the shape parameters, which is much faster and is accurate and reliable for very large values. (This affects pbinom(), pf(), qbeta() and other functions using pbeta at C level.) o pch="." now by default produces a rectangle at least 0.01" per side on high-resolution devices. (It used to be one-pixel square even on high-resolution screens and Windows printers, but 1/72" on postscript() and pdf() devices.) Additionally, the size is now scalable by 'cex'; see ?points and note that the details are subject to change. o pdf() now responds to the 'paper' and 'pagecentre' arguments. The default value of 'paper' is "special" for backward-compatibility (this is different from the default for postscript()). o plot.data.frame() tries harder to produce sensible plots for non-numeric data frames with one or two columns. o The predict() methods for "prcomp" and "princomp" now match the columns of 'newdata' to the original fit using column names if these are available. o New function recordGraphics() to encapsulate calculations and graphics output together on graphics engine display list. To be used with care. o New function RSiteSearch() to query R-related resources on-line (contributed by Jonathan Baron and Andy Liaw). o scan() arranges to share storage of duplicated character strings read in: this can dramatically reduce the memory requirements for large character vectors which will subsequently be turned into factors with relatively few levels. For a million items this halved the time and reduced storage by a factor of 20. scan() has a new argument 'allowEscapes' (default TRUE) that controls when C-style escapes in the input are interpreted. Previously only \n and \r were interpreted, and then only within quoted strings when no separator was supplied. scan() used on an open connection now pushes back on the connection its private `ungetc' and so is safer to use to read partial lines. o scatter.smooth() and loess.smooth() now handle missing values in their inputs. o seq.Date() and seq.POSIXt() now allow 'to' to be before 'from' if 'by' is negative. o sprintf() has been enhanced to allow the POSIX/XSI specifiers like "%2$6d", and also accepts "%x" and "%X". sprintf() does limited coercion of its arguments. sprintf() accepts vector arguments and operates on them in parallel (after re-cycling if needed). o New function strtrim() to trim character vectors to a display width, allowing for double-width characters in multi-byte character sets. o subset() now has a method for matrices, similar to that for data frames. o Faster algorithm in summaryRprof(). o sunflowerplot() has new arguments 'col' and 'bg'. o sys.function() now has argument 'which' (as has long been presaged on its help page). o Sys.setlocale("LC_ALL", ) now only sets the locale categories which R uses, and Sys.setlocale("LC_NUMERIC", ) now gives a warning (as it can cause R to malfunction). o unclass() is no longer allowed for environments and external pointers (since these cannot be copied and so unclass() was destructive of its argument). You can still change the "class" attribute. o File-name matching is no longer case-insensitive with unz() connections, even on Windows. o New argument 'immediate.' to warning() to send an immediate warning. o New convenience wrappers write.csv() and write.csv2(). o There is a new version for write.table() which is implemented in C. For simple matrices and data frames this is several times faster than before, and uses negligible memory compared to the object size. The old version (which no longer coerces a matrix to a data frame and then back to a matrix) is available for now as write.table0(). o The functions xinch(), yinch(), and xyinch() have been moved from package 'grDevices' into package 'graphics'. o Plotmath now allows underline in expressions. (PR#7286, contributed by Uwe Ligges.) o BATCH on Unix no longer sets --gui="none" as the X11 module is only loaded if needed. o The X11 module (and the hence X11(), jpeg() and png() devices and the X-based dataentry editor) is now in principle available under all Unix GUIs except --gui="none", and this is reflected in capabilities(). capabilities("X11") determines if an X server can be accessed, and so is more likely to be accurate. o Printing of arrays now honours the 'right' argument if there are more than two dimensions. o Tabular printing of numbers now has headers right-justified, as they were prior to version 1.7.0 (spotted by Rob Baer). o Lazy-loading databases are now cached in memory at first use: this enables R to run much faster from slow file systems such as USB flash drives. There is a small (less than 2Mb) increase in default memory usage. o The implicit class structure for numeric vectors has been changed, so that integer/real vectors try first methods for class "integer"/"double" and then those for class "numeric". The implicit classes for matrices and arrays have been changed to be "matrix"/"array" followed by the class(es) of the underlying vector. o splines::splineDesign() now allows the evaluation of a B-spline basis everywhere instead of just inside the "inner" knots, by setting the new argument `outer.ok = TRUE'. o Hashing has been tweaked to use half as much memory as before. o Readline is not used for tilde expansion when R is run with --no-readline, nor from embedded applications. Then "~name" is no longer expanded, but "~" still is. o The regular expression code is now based on that in glibc 2.3.3. It has stricter conformance to POSIX, so metachars such as { } + * may need to be escaped where before they did not (but could have been). o New encoding 'TeXtext.enc' improves the way postscript() works with Computer Modern fonts. o Replacement in a non-existent column of a data frame tries harder to create a column of the correct length and so avoid a corrupt data frame. o For Windows and readline-based history, the saved file size is re-read from R_HISTSIZE immediately before saving. o Collected warnings during start-up are now printed before the initial prompt rather than after the first command. o Changes to package 'grid': - preDrawDetails(), drawDetails(), and postDrawDetails() methods are now recorded on the graphics engine display list. This means that calculations within these methods are now run when a device is resized or when output is copied from one device to another. - Fixed bug in grid.text() when 'rot' argument has length 0. (privately reported by Emmanuel Paradis) - New getNames() function to return just the names of all top-level grobs on the display list. - Recording on the grid display list is turned off within preDrawDetails(), drawDetails(), and postDrawDetails() methods. - Grid should recover better from errors or user-interrupts during drawing (i.e., not leave you in a strange viewport or with strange graphical parameter settings). - New function grid.refresh() to redraw the grid display list. - New function grid.record() to capture calculations with grid graphics output. - grobWidth and grobHeight ("grobwidth" and "grobheight" units) for primitives (text, rects, etc, ...) are now calculated based on a bounding box for the relevant grob. NOTE: this has changed the calculation of the size of a scalar rect (or circle or lines). - New arguments 'warn' and 'wrap' for function grid.grab() - New function grid.grabExpr() which captures the output from an expression (i.e., not from the current scene) without doing any drawing (i.e., no impact on the current scene). - upViewport() now (invisibly) returns the path that it goes up (suggested by Ross Ihaka). - The 'gamma' gpar has been deprecated (this is a device property not a property of graphical objects; suggested by Ross Ihaka). - New 'lex' gpar; a line width multiplier. - grid.text() now handles any language object as mathematical annotation (instead of just expressions). - plotViewport() has default value for 'margins' argument (that match the default value for par(mar)). - The 'extension' argument to dataViewport() can now be vector, in which case the first value is used to extend the xscale and the second value is used to extend the y scale. (suggested by Ross Ihaka). - All 'just' arguments (for viewports, layouts, rectangles, text) can now be numeric values (typically between 0 [left] and 1 [right]) as well as character values ("left", "right", ...). For rectangles and text, there are additional 'hjust' and 'vjust' arguments which allow numeric vectors of justification in each direction (e.g., so that several pieces of text can have different justifications). (suggested by Ross Ihaka) - New 'edits' argument for grid.xaxis() and grid.yaxis() to allow specification of on-the-fly edits to axis children. - applyEdit(x, edit) returns x if target of edit (i.e., child specified by a gPath) cannot be found. - Fix for calculation of length of max/min/sum unit. Length is now (correctly) reported as 1 (was reported as length of first arg). - Viewport names can now be any string (they used to have to be a valid R symbol). - The 'label' argument for grid.xaxis() and grid.yaxis() can now also be a language object or string vector, in which case it specifies custom labels for the tick marks. INTERNATIONALIZATION o Unix-alike versions of R can now be used in UTF-8 and other multi-byte locales on suitably equipped OSes if configured with option --enable-mbcs (which is the default). [The changes to font handling in the X11 module are based on the Japanization patches of Ei-ji Nakama.] Windows versions of R can be used in `East Asian' locales on suitable versions of Windows. See the 'Internationalization' chapter in the 'Installation and Administration' manual. o New command-line flag --encoding to specify the encoding to be assumed for stdin (but not for a console). o New function iconv() to convert character vectors between encodings, on those OSes which support this. See the new capabilities("iconv"). o The meaning of 'encoding' for a connection has changed: it now allows any charset encoding supported by iconv on the platform, and can re-encode output as well as input. As the new specification is a character string and the old was numeric, this should not cause incorrect operation. o New function localeToCharset() to find/guess encoding(s) from the locale name. o nchar() returns the true number of bytes stored (including any embedded nuls), this being 2 for missing values. It has an optional argument 'type' with possible non-default values "chars" and "width" to give the number of characters or the display width in columns. o Characters can be entered in hexadecimal as e.g. \x9c, and in UTF-8 and other multibyte locales as \uxxxx, \u{xxxx}, \Uxxxxxxxx or \U{xxxxxxxx}. Non-printable Unicode characters are displayed C-style as \uxxxx or \Uxxxxxxxx. o LC_MONETARY is set to the locale, which affects the result of Sys.localeconv(), but nothing else in R itself. (It could affect add-on packages.) o source() now has an 'encoding' argument which can be used to make it try out various possible encodings. This is made use of by example() which will convert (non-UTF-8) Latin-1 example files in a UTF-8 locale. o read/writeChar() work in units of characters, not bytes. o .C() now accepts an ENCODING= argument where re-encoding is supported by the OS. See `Writing R Extensions'. o delimMatch (tools) now reports match positions and lengths in units of characters, not bytes. The delimiters can be strings, not just single ASCII characters. o .Rd files can indicate via a \encoding{} argument the encoding that should be assumed for non-ASCII characters they contain. o Phrases in .Rd files can be marked by \enc{}{} to show a transliteration to ASCII for use in e.g. text help. o The use of 'pch' in points() now allows for multi-byte character sets: in such a locale a glyph can either be specified as a multi-byte single character or as a number, the Unicode point. o New function l10n_info() reports on aspects of the locale/charset currently in use. o scan() is now aware of double-byte locales such as Shift-JIS in which ASCII characters can occur as the second ('trail') byte. o Functions sQuote() and dQuote() use the Unicode directional quotes if in a UTF-8 locale. o The infrastructure is now in place for C-level error and warning messages to be translated and used on systems with Native Language Support. This has been used for the startup message in English and to translate Americanisms such as 'color' into English: translations to several other languages are under way, and some are included in this release. See 'Writing R Extensions' for how to make use of this in a package: all the standard packages have been set up to do translation, and the 'language' 'en@quot' is implemented to allow Unicode directional quotes in a UTF-8 locale. o R-level stop(), warning() and message() messages can be translated, as can other messages via the new function gettext(). Tools xgettext() and xgettext2pot() are provided in package tools to help manage error messages. gettextf() is a new wrapper to call sprintf() using gettext() on the format string. o Function ngettext() allows the management of singular and plural forms of messages. UTILITIES o New functions mirror2html() and checkCRAN(). o R CMD check has a new option '--use-valgrind'. o R CMD check now checks that Fortran and C++ files have LF line endings, as well as C files. It also checks Makevars[.in] files for portable compilation flags. o R CMD check will now work on a source tarball and prints out information about the version of R and the package. o tools:::.install_package_code_files() (used to collate R files when installing packages) ensures files are separated by a line feed. o vignette() now returns an object of class "vignette" whose print() method opens the corresponding PDF file. The edit() method can be used to open the code of the vignette in an editor. o R CMD INSTALL on Unix has a new option '--build' matching that on Windows, to package as tarball the installed package. o R CMD INSTALL on Unix can now install binary bundles. o R CMD build now changes src files to LF line endings if necessary. o R CMD build now behaves consistently between source and binary builds: in each case it prepares a source directory and then either packages that directory as a tarball or calls R CMD INSTALL --build on the prepared sources. This means that R CMD build --binary now respects .Rbuildignore and will rebuild vignettes (unless the option --no-vignettes is used). For the latter, it now installs the current sources into a temporary library and uses that version of the package/bundle to rebuild the vignettes. o R CMD build now reports empty directories in the source tree. o New function write_PACKAGES() in package 'tools' to help with preparing local package repositories. (Based on a contribution by Uwe Ligges.) How to prepare such repositories is documented in the 'R Installation and Administration' manual. o package.skeleton() adds a bit more to DESCRIPTION. o Sweave changes: - \usepackage[nogin]{Sweave} in the header of an Sweave file supresses auto-setting of the graphical parameter like width of graphics. - The new \SweaveInput{} command works similar to LaTeX's \input{} command. - Option value strip.white=all strips all blank lines from the output of a code chunk. - Code chunks with eval=false are commented out by Stangle() and hence no longer tested by R CMD check. DOCUMENTATION o File doc/html/faq.html no longer exists, and doc/manual/R-FAQ.html (which has active links to other manuals) is used instead. (If makeinfo >= 4.7 is not available, the version on CRAN is linked to.) o Manual 'Writing R Extensions' has further details on writing new front-ends for R using the new public header files. o There are no longer any restrictions on characters in the \name{} field of a .Rd file: in particular _ is supported. C-LEVEL FACILITIES o There are new public C/C++ header files Rinterface.h and R_ext/RStartup.h for use with external GUIs. o Added an onExit() function to graphics devices, to be executed upon user break if non-NULL. o ISNAN now works even in C++ code that undefines the 'isnan' macro. o R_alloc's limit on 64-bit systems has been raised from just under 2^31 bytes (2Gb) to just under 2^34 (16Gb), and is now checked. o New math utility functions log1pmx(x), lgamma1p(x), logspace_add(logx, logy), and logspace_sub(logx, logy). DEPRECATED & DEFUNCT o The aqua module for MacOS X has been removed: --with-aqua now refers to the unbundled Cocoa GUI. o Capabilities "bzip2", "GNOME, "libz" and "PCRE" are defunct. o The undocumented use of UseMethod() with no argument was deprecated in 2.0.1 and is now regarded as an error. o Capability "IEEE754" is deprecated. o The 'CRAN' argument to update.packages(), old.packages(), new.packages(), download.packages() and install.packages() is deprecated in favour of 'repos', which replaces it as a positional argument (so this is only relevant for calls with named args). o The S3 methods for getting and setting names of "dist" objects have been removed (as they provided names with a different length from the "dist" object itself). o Option "repositories" is no longer used and so not set. o loadURL() is deprecated in favour of load(url()). o delay() is deprecated. Use delayedAssign() instead. INSTALLATION CHANGES o New configure option --enable-mbcs to enable support for UTF-8 locales, on by default. o R_XTRA_[CF]FLAGS are now used during the configuration tests, and [CF]PICFLAGS if --enable-R-shlib was specified. This ensures that features such as inlining are only used if the compilation flags specified support them. (PR#7257) o Files FAQ, RESOURCES, doc/html/resources.html are no longer in the SVN sources but are made by 'make dist'. o The GNOME GUI is unbundled, now provided as a package on CRAN. o Configuring without having the recommended packages is now an error unless --with-recommended-packages=no (or equivalent) is used. o Configuring without having the X11 headers and libraries is now an error unless --with-x=no (or equivalent) is used. o Configure tries harder to find a minimal set of FLIBS. Under some circumstances this may remove from R_LD_LIBRARY_PATH path elements that ought to have specified in LDFLAGS (but were not). o The C code for most of the graphics device drivers and their afm files are now in package grDevices. o R is now linked against ncurses/termlib/termcap only if readline is specified (now the default) and that requires it. o Makeinfo 4.7 or later is now required for building the HTML and Info versions of the manuals. PACKAGE INSTALLATION CHANGES o There are new types of packages, identified by the Type field in the DESCRIPTION file. For example the GNOME console is now a separate package (on CRAN), and translations can be distributed as packages. o There is now support of installing from within R both source and binary packages on MacOS X and Windows. Most of the R functions now have a 'type' argument defaulting to getOption("pkgType") and with possible values "source", "win.binary" and "mac.binary". The default is "source" except under Windows and the CRAN GUI build for MacOS X. o install.packages() and friends now accept a vector of URLs for 'repos' or 'contriburl' and get the newest available version of a package from the first repository on the list in which it is found. The argument 'CRAN' is still accepted, but deprecated. install.packages() on Unix can now install from local .tar.gz files via repos = NULL (as has long been done on Windows). install.packages() no longer asks if downloaded packages should be deleted: they will be deleted at the end of the session anyway (and can be deleted by the user at any time). If the repository provides the information, install.packages() will now accept the name of a package in a bundle. If 'pkgs' is omitted install.packages() will use a listbox to display the available packages, on suitable systems. 'dependencies' can be a character vector to allow only some levels of dependencies (e.g. not "Suggests") to be requested. o There is a new possible value update.packages(ask="graphics") that uses a widget to (de)select packages, on suitable systems. o The option used is now getOption("repos") not getOption("CRAN") and it is initially set to a dummy value. Its value can be a character vector (preferably named) giving one or several repositories. A new function chooseCRANmirror() will select a CRAN mirror. This is called automatically if the contrib.url() encounters the initial dummy value of getOption("repos") A new function setRepositories() can be used to create getOption("repos") from a (platform-specific) list of known repositories. o New function new.packages() to report uninstalled packages available at the requested repositories. This also reports incomplete bundles. It will optionally install new packages. o New function available.packages(), similar to CRAN.packages() but for use with multiple repositories. Both now only report packages whose R version requirements are met. o update.packages() and old.packages() have a new option 'checkBuilt' to allow packages installed under earlier versions of R to be updated. o remove.packages() can now remove bundles. o The Contains: field of the DESCRIPTION file of package bundles is now installed, so later checks can find out if the bundle is complete. o packageStatus() is now built on top of *.packages, and gains a 'method' argument. It defaults to the same repositories as the other tools, those specified by getOption("repos"). BUG FIXES o Configuring for Tcl/Tk makes use of ${TK_LIB_SPEC} ${TK_LIBS} not ${TK_LIB_SPEC} ${TK_XLIBSW}, which is correct for recent versions of Tk, but conceivably not for old tkConfig.sh files. o detach() was not recomputing the S4 methods for primitives correctly. o Methods package now has class "expression" partly fixed in basic classes, so S4 classes can extend these (but "expression" is pretty broken as a vector class in R). o Collected warnings had messages with unneeded trailing space. o S4 methods for primitive functions must be exported from namespaces; this is now done automatically. Note that is.primitive() is now in "base", not "methods". o Package grid: - Fixed bug in grid.text() when "rot" argument has length 0. (reported by Emmanuel Paradis) o .install_package_vignette_index() created an index even in an empty 'doc' directory. o The print() method for factors now escapes characters in the levels in the same way as they are printed. o str() removed any class from environment objects. str() no longer interprets control characters in character strings and factor levels; also no longer truncates factor levels unless they are longer than 'nchar.max'. Truncation of such long strings is now indicated ''outside'' the string. str() was misleading for the case of a single slot. str() now also properly displays S4 class definitions (such as returned by getClass(). o print.factor(quote=TRUE) was not quoting levels, causing ambiguity when the levels contained spaces or quotes. o R CMD check was confused by a trailing / on a package name. o write.table() was writing incorrect column names if the data frame contained any matrix-like columns. o write.table() was not quoting row names for a 0-column x. o t(x)'s default method now also preserves names(dimnames(x)) for 1D arrays 'x'. o r <- a %*% b no longer produces names(dimnames(r)) == c("", "") unless one of a or b has named dimnames. o Some .Internal functions that were supposed to return invisibly did not. This was behind PR#7397 and PR#7466. o eval(expr, NULL, encl) now looks up variables in encl, as eval(expr, list(), encl) always did o Coercing as.data.frame(NULL) to a pairlist caused an error. o p.adjust(p, ..) now correctly works when `p' contains NAs (or when it is of length 0 or length 2 for method = "hommel"). o 'methods' initialization was calling a function intended for .Call() with .C(). o optim() needed a check that the objective function returns a value of length 1 (spotted by Ben Bolker). o X11() was only scaling its fonts to pointsize if the dpi was within 0.5 of 100dpi. o X11() font selection was looking for any symbol font, and sometimes got e.g. bold italic if the server has such a font. o dpois(*, lambda=Inf) now returns 0 (or -Inf for log). o Using pch="" gave a square (pch=0)! Now it is regarded as the same as NA, which was also undocumented but omits the point. o Base graphics now notices (ab)lines which have a zero coordinate on log scale, and omits them. (PR#7559) o stop() and warning() now accept NULL as they are documented to do (although this seems of little use and is equivalent to ""). o weighted.mean() now checks the length of the weight vector w. o getAnywhere() was confused by names with leading or trailing dots (spotted by Robert McGehee) o eval() was not handling values from return() correctly. o par(omd) is now of the form c(x1, x2, y1, y2) to match the documentation and for S-PLUS compatibility. [Previously, par(omd) was of the form c(bottom, left, top, right) like par(oma) and par(omi)] o formatC() did not check its 'flag' argument, and could segfault if it was incorrect. (PR#7686) o Contrasts needed to be coerced to numeric (e.g. from integer) inside model.matrix. (PR#7695) o socketSelect() did not check for buffered input. o Reads on a non-blocking socket with no available data were not handled properly and could result in a segfault. o The "aovlist" method for se.contrast() failed in some very simple cases that were effectively not multistratum designs, e.g. only one treatment occurring in only one stratum. o pgamma() uses completely re-written algorithms, and should work for all (even very extreme) arguments; this is based on Morten Welinder's contribution related to PR#7307. o dpois(10, 2e-308, log=TRUE) and similar cases gave -Inf. o x <- 2^(0:1000); plot(x, x^.9, type="l", log="xy")# and x <- 2^-(1070:170); plot(x, x^.9, type="l", log="xy")# now both work o summary.lm() asked for a report on a reasonable occurrence, but the check failed to take account of NAs. o lm() was miscalculating 'df.residual' for empty models with a matrix response. o summary.lm() now behaves more sensibly for empty models. o plot.window() was using the wrong sign when adjusting xlim/ylim for positive 'asp' and a reversed axis. o If malloc() fails when allocating a large object the allocator now does a gc and tries the malloc() again. o packageSlot() and getGroupMembers() are now exported from the 'methods' package as they should from documentation and the Green Book. o rhyper() was giving numbers slightly too small, due to a bug in the original algorithm. (PR#7314) o gsub() was sometimes incorrectly matching ^ inside a string, e.g. gsub("^12", "x", "1212") was "xx". o [g]sub(perl = TRUE) was giving random results for a 0-length initial match. (PR#7742) o [g]sub was ignoring most 0-length matches, including all initial ones. Note that substitutions such as gsub("[[:space:]]*", " ", ...) now work as they do in 'sed' (whereas the effect was previously the same as gsub("[[:space:]]+", " ", ...)). (In part PR#7742) o Promises are now evaluated when extracted from an environment using '$' or '[[ ]]'. o reshape(direction="wide") had some sorting problems when guessing time points (PR#7669) o par() set 'xaxp' before 'xlog' and 'yaxp' before 'ylog', causing PR#831. o The logic in tclRequire() to check the availability of a Tcl package turned out to be fallible. It now uses a try()-and-see mechanism instead. o Opening a unz() connection on a non-existent file left a file handle in use. o "dist" objects of length 0 failed to print. o INSTALL and the libR try harder to find a temporary directory (since there might be one left over with the same PID). o acf() could cause a segfault with some datasets. (PR#7771) o tan(1+LARGEi) now gives 0+1i rather than 0+NaNi (PR#7781) o summary(data.frame(mat = I(matrix(1:8, 4)))) does not go into infinite recursion anymore. o writeBin() performed byte-swapping incorrectly on complex vectors, also swapping real and imaginary parts. (PR#7778) o read.table() sometimes discarded as blank lines containing only white space, even if sep=",". ************************************************** * * * 2.0 SERIES NEWS * * * ************************************************** CHANGES IN R VERSION 2.0.1 patched NEW FEATURES o warnings() now looks only in the workspace for `last.warning' (suggested by PR#7363). o The search for browsers now starts with firefox, and has mozilla ahead of netscape. PACKAGE INSTALLATION CHANGES o A package DESCRIPTION file which contains a Built field (it should not!) is now worked around, with loud warnings. BUG FIXES o split() was accepting raw and list vectors as input, but not populating the output correctly. split() now handles vectors with names internally and so is almost as fast as on vectors without names (and maybe 100x faster than before). o subset() now throws an error if its 'subset' argument is not logical whereas it could appear to work and give wrong answers with e.g. a numeric 'subset' argument. o sum(), max(), min(), prod(), any() and all() were incorrectly using partial matching for their na.rm argument. o kmeans() now ensures that the initial cluster centers it chooses are distinct. o text()'s default method could segfault if passed 0-length coordinates. o R CMD INSTALL (Unix) was sometimes leaving a temporary dir behind. (PR#7230) o read.table() could fail when the row.names were looking like numbers. o seq(length= ) now always returns "integer" storage. o labels.lm was broken. (PR#7417) o The hashing used for character vectors in object.size() was inefficient for vectors with thousands of identical values not sharing the same storage (an unusual case). o data.matrix() now warns if applied to a data frame with classed columns. o Plotting histograms where the expression used to deparse to multiple lines now gives a sensible default title. (PR#7421) o The print method for getDLLRegisteredRoutines() was badly designed, and failed for all the standard packages' DLLs. o getDLLRegisteredRoutines.character() was broken. o write.table(x, row.names=FALSE) was incorrect for a 0-column x. o write.table() assumed dec = "," if it was not ".". o morley.tab used by R-intro was not installed on Unix since 2.0.0 (it was on Windows). o gsub(perl=TRUE) returned a string which printed with trailing garbage if there was a match at the beginning whose replacement was shorter. (PR#7479) Similarly, the result was truncated if a replacement at the beginning was longer. o Some PDF readers do not define PDFDocEncoding, so pdf()'s ISOLatin1 encoding is now derived from WinAnsi rather than PDFDocEncoding. o xfig() had not been updated for the 2.0.0 alpha changes. Using more than one plot with a non-white background and with onefile=FALSE could segfault. o sprintf() did not check for buffer overflow on character strings. (PR#7554) o The error message when evaluation depth was exceeded itself caused an error in deparsing and so was not shown. o The 'datalist' file was not being used during installation (2.0.1 only). o replications() was wrongly reporting lack of balance in designs with interactions (and had since unique() gained a matrix method). CHANGES IN R VERSION 2.0.1 NEW FEATURES o Platform equivalence in library() is tested by a new function testPlatformEquivalence() which ignores the 'vendor' field and can be customized by cognescenti. o The assignment form of split() allows recycling of vectors within the value list. In particular, things like split(x, g) <- lapply(split(x, g), mean) now work DOCUMENTATION o Manual `Writing R Extensions' has new sections on writing portable packages and on writing new front-ends for R -- the latter will be more comprehensive in R 2.1.0 which has new public header files. DEPRECATED & DEFUNCT o The aqua module in MacOS X is deprecated. o Capabilities "bzip2", "GNOME, "libz" and "PCRE" are deprecated. o The GNOME GUI on Unix-alikes is deprecated as part of R; it will be available in another form as from R 2.1.0. o The undocumented use of UseMethod() with no argument is now formally deprecated. INSTALLATION CHANGES o Building on Alpha OSF/1 no longer forces the C flag -std1, which appears to be no longer needed. (PR#7257) o The compiler flag -mieee-fp is no longer used on i386 Linux (these days it is only passed to the linker and was only invoked for compilation steps). o -D__NO_MATH_INLINES is only used on older ix86 glibc-based systems which need it (tested at configure time). This leads to small improvements in speed and accuracy on modern systems. o If makeinfo >= 4.5 is not available, warnings are given that some of the HTML manuals will be missing, and the index page given by help.start() will link to CRAN versions of those manuals. o Files aclocal.m4 and acinclude.m4 used in maintainer builds are not longer included in the distribution. C-LEVEL FACILITIES o It was not clear in 'Writing R Extensions' that some of the entry points in the 'Utilities' section were not declared in (they were in ). Now all the entry points in that section are declared in , included by . BUG FIXES o The grid.grab() function in package grid would throw an error if there were no viewports pushed (now returns NULL). o model.frame.default() takes row names from the response variable if that has suitable names and there is no 'data' argument. (This follows S but was not previously implemented in R.) o write.table() was not respecting the 'dec' argument for complex numbers. o write.table() printed a mixture of numeric and complex numbers as all complex. (PR#7260) o R CMD INSTALL failed with versioned installs on packages which save images (only). o dlogis() gave NaN not 0 for large negative arguments. o Importing from another namespace was broken for versioned installs, incorrectly reporting something like "package 'imported_from' does not have a name space". o The GNOME interface under Linux/Unix was broken. (PR#7276) o For the jpeg/png devices under Linux/Unix, under certain rare circumstances clipping needed to be cleared before starting a new page. (PR#7270, which has been the case since the devices were introduced in 1.1.0.) o First lattice plot (first grid.newpage() call) did not start a new page IF there had been a previous traditional graphics plot (on the same device). o Using install.packages() to install the same package to more than one library gave an incorrect warning message. (If there were two or more such packages it might give an error.) o .packages(all.available=TRUE) returned packages with an invalid version field in their DESCRIPTION whereas .find.packages() and packageDescription() did not. Now all do not. o packageDescription() now correctly reports that a package does not exist, rather than that its DESCRIPTION file is 'missing or broken'. o 'make dist' from builddir != sourcedir was copying not linking recommended packages to *.tgz. o Slots in prototype objects can inherit from locally defined classes (which were not being found correctly before). o Several fixes to the behavior of as() when there are either coerce= or replace= methods supplied in a call to setIs(). Related fixes to setIs() to handle correctly previous methods, if there were any. o splinefun(1[0], 1[0])(1) doesn't segfault anymore (PR#7290). spline() and splinefun() now also work with missing values by omiting them. o ecdf() was failing on inputs containing NAs. (Part of PR#7292) o tools:::.install_package_description was splitting the Built: field across lines on platforms with very long names. o capabilities() was wrong for the Aqua GUI on MacOS X. o Using Rprof() with a non-writable 'file' argument is now a non-fatal error and does not abort R. o binom.test() did not deparse its arguments early enough such that the reported data were ugly if x was a table. o Systems based on glibc, including those using R's substitute for strptime, were handling strptime("2001", "%Y") incorrectly, in some cases crashing. R's substitute code has been corrected (but problems may remain if glibc is used). See the ?strptime for what should happen (which is system-specific). o untrace() after trace() failed if package 'methods' was attached. (PR#7301) o summary.stepfun() was reporting for n > 6 summaries of the knots and levels as the actual values. Both print() and summary() methods called the constant values "step heights", although they were not the heights of the steps. o is.na/is.nan() were giving spurious warnings if applied to a raw vector. o is.atomic() gave incorrect result (false) for a raw vector. o rank() and order() accepted raw and list inputs, but did not give a sensible answer (always 1:n). Similarly, partial sorts of a raw vector were accepted but did nothing. o require() without a version argument tried for an unversioned load of a package even though a versioned install was already loaded. This often led to a message that a required package was being loaded when it was not actually being loaded. o str() made use of attributes() instead of slot(), and hence didn't properly print NULL slots. o contrib.url() now handles URLs ending in '/' correctly. o str() removed any class from externalptr objects. o logLik() and hence AIC() failed or gave incorrect answers on "lm" fits with na.action = na.exclude (and perhaps other na.actions's except na.omit and na.fail). o pmax() and pmin() sometimes used NAs in internal subassignments, and sometimes these failed. o Subassigning an expression, e.g. expr[2] <- 1, could leave an invalid object and so cause a segfault. (PR#7326) o download/install.packages() would misbehave if there was more than one version of a package in a repository. o sort(partial=) silently ignored some other arguments: using 'decreasing' or 'index.return' or supplying a factor are now errors. o The ave() function had trouble if the grouping contained unused levels. o read.fwf() got confused by skip > 0 and could infinite loop under some circumstances. (PR#7350) o upgrade(x, ask = FALSE) was broken for a "packageStatus" object. o Class "raw" had been omitted from the list of basic classes in the "methods" package and so could not be used in S4 classes. o Function getGroupMembers(), part of the definition of S4 classes, had been promised for release 2.0, but slipped through. o toLatex(sessionInfo()) produced incorrect LaTeX on some platforms due to special characters in the platform identifier. ********************************************************* * * * News of 1.x.y and 2.0.0 is in file `ONEWS' * * News of 1.0.0 and earlier is in file `OONEWS' * * * *********************************************************