Changes from grid_1.9.0 to grid_2.0.0: ------------------------------------ 1. Calculation of number of circles to draw in circleGrob now looks at length of y and r as well as length of x. 2. Calculation of number of rectangles to draw in rectGrob now looks at length of y, w, and h as well as length of x. 3. All primitives (rectangles, lines, text, ...) now handle non-finite values (NA, Inf, -Inf, NaN) for locations and sizes. Non-finite values for locations, sizes, and scales of viewports result in error messages. There is a new vignette("nonfinite") which describes this new behaviour. 4. Fixed (unreported) bug in drawing circles. Now checks that radius is non-negative. Changes from grid_1.9.0 to grid_1.9.1: ------------------------------------ 1. Fixed (unreported) bug in internal calculation of unitArithmetic object when op = * and numeric operand longer than unit operand 2. Fixed (unreported) bug in creation of unitArithmetic objects when numeric operand is integer. All numeric operands are now coerced to real. Changes from grid_1.8.0 to grid_1.9.0: ------------------------------------ 1. Renamed push/pop.viewport() to push/popViewport(). 2. Added upViewport(), downViewport(), and seekViewport() to allow creation and navigation of viewport tree (rather than just viewport stack). 3. Added id and id.lengths arguments to grid.polygon() to allow multiple polygons within single grid.polygon() call. 4. Added vpList(), vpStack(), vpTree(), and current.vpTree() to allow creation of viewport "bundles" that may be pushed at once (lists are pushed in parallel, stacks in series). current.vpTree() returns the current viewport tree. 5. Added vpPath() to allow specification of viewport path in downViewport() and seekViewport(). See ?viewports for an example of its use. NOTE: it is also possible to specify a path directly, e.g., something like "vp1::vp2", but this is only advised for interactive use (in case I decide to change the separator :: in later versions). 6. Added "just" argument to grid.layout() to allow justification of layout relative to parent viewport *IF* the layout is not the same size as the viewport. There's an example in help(grid.layout). 7. Allowed the "vp" slot in a grob to be a viewport name or a vpPath. The interpretation of these new alternatives is to call downViewport() with the name or vpPath before drawing the grob and upViewport() the appropriate amount after drawing the grob. Here's an example of the possible usage: pushViewport(viewport(w=.5, h=.5, name="A")) grid.rect() pushViewport(viewport(w=.5, h=.5, name="B")) grid.rect(gp=gpar(col="grey")) upViewport(2) grid.rect(vp="A", gp=gpar(fill="red")) grid.rect(vp=vpPath("A", "B"), gp=gpar(fill="blue")) 8. Added engine.display.list() function. This allows the user to tell grid NOT to use the graphics engine display list and to handle ALL redraws using its own display list (including redraws after device resizes and copies). This provides a way to avoid some of the problems with resizing a device when you have used grid.convert(), or the gridBase package, or even base functions such as legend(). There is a document discussing the use of display lists in grid on the grid web site (http://www.stat.auckland.ac.nz/~paul/grid/grid.html) 9. Changed the implementation of grob objects. They are no longer implemented as external references. They are now regular R objects which copy-by-value. This means that they can be saved/loaded like normal R objects. In order to retain some existing grob behaviour, the following changes were necessary: - grobs all now have a "name" slot. The grob name is used to uniquely identify a "drawn" grob (i.e., a grob on the display list). - grid.edit() and grid.pack() now take a grob name as the first argument instead of a grob. (Actually, they take a gPath - see below) - the "grobwidth" and "grobheight" units take either a grob OR a grob name (actually a gPath - see below). Only in the latter case will the unit be updated if the grob "pointed to" is modified. In addition, the following features are now possible with grobs: - grobs now save()/load() like any normal R object. - many grid.*() functions now have a *Grob() counterpart. The grid.*() version is used for its side-effect of drawing something or modifying something which has been drawn; the *Grob() version is used for its return value, which is a grob. This makes it more convenient to just work with grob objects without producing any graphical output (by using the *Grob() functions). - there is a gTree object (derived from grob), which is a grob which can have children. A gTree also has a "childrenvp" slot which is a viewport which is pushed and then "up"ed before the children are drawn; this allows the children of a gTree to place themselves somewhere in the viewports specified in the childrenvp by having a vpPath in their vp slot. - there is a gPath object, which is essentially a concatenation of grob names. This is used to specify the child of (a child of ...) a gTree. - there is a new API for creating/accessing/modifying grob objects: grid.add(), grid.remove(), grid.edit(), grid.get() (and their *Grob() counterparts can be used to add, remove, edit, or extract a grob or the child of a gTree. NOTE: the new grid.edit() API is incompatible with the previous version. 10. Added stringWidth(), stringHeight(), grobWidth(), and grobHeight() convenience functions (they produce "strwidth", "strheight", "grobwidth", and "grobheight" unit objects, respectively). 11. Allowed viewports to turn off clipping altogether. Possible settings for viewport clip arg are now: "on" = clip to the viewport (was TRUE) "inherit" = clip to whatever parent says (was FALSE) "off" = turn off clipping Still accept logical values (and NA maps to "off") Changes from grid_1.8.0 to grid_1.8.1: ------------------------------------ 1. I have effectively disabled the "mystrwidth", "mystrheight", "mychars", and "mylines" units. These are now identical in behaviour to the equivalent units without the "my". Another way to look at it is that I have modified the behaviour of "lines", "chars", "strwidth", and "strheight" so that they ALWAYS obey the latest gpar settings (including any gpar settings in a grob). Some examples ... This text is sized AND positioned in terms of a fontsize of 6: grid.text("small text and small lines", y=unit(2, "lines"), gp=gpar(fontsize=6)) This text is 6 pt in size, but is positioned in terms of the (default on X11) fontsize 12: push.viewport(viewport(y=unit(2, "lines"))) grid.text("small test and big lines", gp=gpar(fontsize=6)) pop.viewport() 2. Fixed a bug in the calculation of "grobwidth" and "grobheight" units. The following code demonstrates the problem (the black rectangle should snugly bound the grey rectangles): grid.newpage() # Create a frame with fontsize=6 gf <- grid.frame(layout=grid.layout(10, 10, widths=unit(rep(1, 10), "strwidth", as.list(rep("o", 10))), heights=unit(rep(1, 10), "strheight", as.list(rep("o", 10)))), gp=gpar(fontsize=6)) # Add a rect to the frame for (i in 1:10) grid.place(gf, grid.rect(gp=gpar(col="grey"), draw=FALSE), col=i, row=i) grid.draw(gf) # Now draw a rect around the frame grid.rect(width=unit(1, "grobwidth", gf), height=unit(1, "grobheight", gf)) 3. Fixed a bug in the implementation of the "cex" gpar. This is now used correctly in the transformation code in unit.c The bug was demonstrated by the following simple example (the second set of points should be twice the radius of the first set of points): grid.newpage() push.viewport(viewport()) grid.points() grid.points(gp = gpar(cex = 2)) Another demonstration from the original bug report from David Hinds: xyplot(1:4~1:4, cex=1:4, pch=1) 4. Fixed a bug in multiplication of scalar by unit object, when the scalar has length > 1. The following example demonstrates the problem: grid.segments(x0=1:3/4, y0=0.1, x1=1:3/4, y1=1:3/4*unit(1, "npc")) This should behave the same as: grid.segments(x0=1:3/4, y0=0.1, x1=1:3/4, y1=unit(1:3/4, "npc")) Changes from grid_0.7-4 to grid_1.8.0: ------------------------------------ 1. grid.text() now checks that the rot argument is numeric and finite. 2. dataViewport() checks for is.null() rather than missing() and has renamed arguments x and y to xData and yData. All to avoid confusion with specifying x= and y= in the ... argument. This also fortuitously fixed a bug in dataViewport where the calculation of the x-range was partially dependent on the y-range(!) Thanks to Russell Norvell for spotting and reporting the bug. 3. unit() checks that units argument is character mode. Fix for bug (first reported by Achim Zeileis) produced by, for example ... unit(1, 2) 4. The function absolute.units() was recursive and now uses a loop. Fixes the following problem (from Deepayan Sarkar): gf <- grid.frame(layout = grid.layout(nrow=1, ncol=1), draw = FALSE) grob.rect <- grid.rect(x = 1:99/100, y = 1:99/100, h = rep(.01, 100), w = rep(.05, 100), gp = gpar(col = terrain.colors(100)), draw = FALSE) grid.pack(frame = gf, row = 1, col = 1, grob = grob.rect, draw = FALSE) grid.draw(gf) # Fails with stack overflow 5. There is now a grid.locator() function for interactively selecting locations within the current grid viewport with a mouse. 6. There is a new grid.convert() function for converting between different coordinate systems. The convertNative() function has been deprecated. 7. The default "top-level" viewport that is generated by grid now has its "native" coordinate system set to the "native" coordinate system of the device. For example, "native" units at the top-level correspond to points on a PostScript device, pixels on an X11 device, and so on. For example, try the following: library(grid) x11() grid.rect(x=10, y=10, width=10, height=10, default.units="native") This may cause consternation if you ever plot grid.points() at the top-level because the default units for grid.points() are "native" ... I consider this an unlikely occurrence. 8. Added a new gpar called "alpha" for specifying transparency. This is supposed to be a number from 1 (opaque) to 0 (transparent). No R devices will take any notice of this whatsoever as yet. 9. Modified "xaxis" and "yaxis" grobs so that they extend the "collection" class. This means that, when a new generic function is created, it may be possible to write methods just for the collection class and not also separate xaxis and yaxis methods. 10. Modified unit subsetting so that logical indices work. For example ... unit(1:4, "npc")[1:4 == 3] 11. Fixed detaching/reloading of grid package (was causing an error). 12. There is a new grid.arrows() primitive. See the help file for example usage. 13. Grid is now a base package (hence version number leap!) Changes from grid_0.7-3 to grid_0.7-4: ------------------------------------ 1. Fixed the bug in the bug-fix in item 7. below. Changes from grid_0.7-2 to grid_0.7-3: ------------------------------------ 1. Properly removed "origin" settings from viewports. 2. Modified grid.pretty() slightly so that it would respond sensibly/usefully to things like ... grid.pretty(c(10, 0)) A side-effect of this is that the following sort of viewport scale specifications become sensible/useful ... push.viewport(viewport(layout=grid.layout(1, 2))) push.viewport(viewport(layout.pos.col=1)) push.viewport(viewport(w=.8, h=.8, xscale=c(10,0))) grid.points(1:10, 1:10/11) grid.xaxis() grid.yaxis() pop.viewport(2) push.viewport(viewport(layout.pos.col=2)) push.viewport(viewport(w=.8, h=.8, yscale=c(10,0))) grid.points(1:10/11, 1:10) grid.xaxis() grid.yaxis() pop.viewport(3) 3. Fixed the calculation of number of "vertices" in grid.lines so that it is the maximum of length(x) and length(y). Used to be calculated solely on length(x). 4. Grid now throws an error if you try to create a unit of length 0. This to fix a bug reported by Bud Gibson, the essence of which was ... grid.points(size=unit(numeric(0), "mm")) 5. The default value of the "at" argument for grid.xaxis() and grid.yaxis() is NULL (was NA; NA was inconsistent with other default argument settings and basically a dumb idea) 6. Grid now throws an error if you try to create a gpar object with an element of length 0. This is to fix a bug reported by Michael Friendly (and diagnosed by Brian Ripley), the essence of which was ... grid.lines(gpar(fontsize=numeric(0))) 7. grid.text() now converts its label argument to a string. This is to fix a bug where "grobwidth" or "grobheight" would segfault if given a text grob for which the label was not a string. (The fix involved including a check for "mystrwidth" and "mystrheight" units in valid.data). The bug could be produced by ... grid.rect(w=unit(1, "grobwidth", data=grid.text(5))) Changes from grid_0.7-1 to grid_0.7-2: ------------------------------------- 1. Fixed some generic/method incompatibilities (pointed out by Kurt). Changes from grid_0.7 to grid_0.7-1: ------------------------------------ 1. Fixed a bug where layout matrix respect was not being applied to the correct cell. For example, the following caused the cell 1,3 to be respected rather than 1,2 ... lt.resp <- matrix(0, 2, 3) lt.resp[1,2] <- 1 grid.show.layout(grid.layout(2, 3, respect = lt.resp)) Reported by Deepayan Sarkar. Changes from grid_0.6 to grid_0.7: ------------------------------------ 1. The web pages for grid have moved to ... http://www.stat.auckland.ac.nz/~paul/grid/grid.html 2. Mathematical annotation is now available in grid. Wherever grid expects a string, an expression may be used instead. This covers not only producing mathematical annotation output, but also correctly calculating width and height of expressions, and checking for overlapping expressions. 3. If you try to save/load a grid grob, it will now fail gracefully rather than seg faulting. 4. If you save a display list containing grid output, then detach grid, then try to run the display list again, it will now fail gracefully rather than seg faulting. 5. All gpar() settings can now be vectors. Well, they could always be vectors, but now values other than the first one will have an effect. This will not happen in all contexts, for example, viewports will only take notice of the first value in each setting, but for graphics functions where multiple items can be output, multiple settings may be sensibly given. Some examples are: # multiple points with different colours grid.points(1:10/11, 1:10/11, gp=gpar(col=1:10)) # multiple segments with different colours grid.segments(1:10/11, 0, 1:10/11, 1, gp=gpar(col=1:10)) # multiple points with different sizes grid.points(1:10/11, 1:10/11, size=unit(1:10, "mm")) # multiple pieces of text with different font sizes grid.text(1:10, x=1:10/11, gp=gpar(fontsize=10:20)) # multiple rects with different lineheights (and height is in "lines") grid.rect(width=.05, x=1:10/11, height=unit(1, "mylines"), gp=gpar(lineheight=1:10)) 6. (Because of a fix to R/src/main/engine.c ...) Multiple-line text (i.e., text with "\n"s in it) is now correctly spaced vertically (i.e., takes notice of the current value of "fontsize"). NOTE, however, that multiple-line text still takes no notice of the current value of "lineheight". 7. Fixed a bug in grid.layout(). It was the case that, if you entered widths or heights which were not unit objects, they were not converted properly to unit objects. 8. Modified the defaulting of "just" arguments when a single value is provided. See the new example in grid.text. 9. Fixed a bug where grid.points(pch=NULL) would cause a crash. This now defaults pch to the value 1. 10. Added "fontfamily" and "fontface" gpar() settings. The fontfamily setting will mostly be ignored until devices are modified to take notice of the extra information, BUT this can be used NOW to specify a Hershey Font family (on all devices). The fontface setting is designed to take over from the old "face" setting, but the latter is retained for backward compatibility. Changes from grid_0.5-1 to grid_0.6: ------------------------------------ 1. Some internal changes to speed up creation of unit objects. This may have a noticeable effect on drawing legends and anything that relies on grid frames (e.g., "key"s in lattice). 2. A couple of bug fixes for "grobwidth" and "grobheight" units. Symptoms were legends not being allocated the correct amount of space. Thanks to Deepayan Sarkar and Peter Kleiweg for help diagnosing the bug and testing the fix. 3. Added plotViewport() and dataViewport() convenience function for creating a viewport that has the typical layout of an R plot. 4. Altered viewport() function so that layout.pos.row and layout.pos.col can be specified as a sequence and only the range() of that sequence is used. 5. Removed most documentation from the package to reduce the download size. The user's guide and changes file are included with the tar ball, but the other documents are only available via http://www.stat.auckland.ac.nz/PEOPLE/paul/grid/grid.html Also changed the format of the user's guide from postscript to pdf. 6. Fixed bug in unit.length where the length of a unit.arithmetic object was calculated incorrectly if the length() of the scalar multiplier was longer than the unit.length() of the unit object being multiplied. 7. Allowed character settings for pch in grid.points() 8. The crash on Windows platforms when plot history is turned on has been fixed in R version 1.5. This fix means that grid_0.6 will only run on R version >= 1.5.0 9. Added handling of NULL values for gpar elements. Except for col and fill, this now means the same as specifying no setting at all for the element -- previous behaviour was a segfault. Changes from grid_0.5 to grid_0.5-1: ------------------------------------ 1. Fix for some grid bugs. The problems were: (i) grid output could not be saved in metafile format (ii) non-grid output could not be saved in metafile format when grid was loaded (iii) empty page at start of grid postscript output (iv) empty page at start of non-grid postscript output when grid was loaded (v) copying grid output from x11 to postscript (dev.copy) produced blank pages in postscript These problems were due to two things in grid: (i) grid created a new page whenever a new device was started. (ii) grid created a new page whenever the display list was replayed (e.g., when a device was resized or the output was copied from one device to another) Grid now only creates a new page the first time grid output is produced on a device AND only creates a new page for replaying the display list IF there has already been grid output on the device. Changes from grid_0.2 to grid_0.5: ---------------------------------- 1. R has a new device API and a new graphics engine. Grid uses these. This means that this version will NOT work on R versions before 1.4.0 Another known "bug" is that this version of grid will crash R if used in Windows with plot history recording turned on (although "add"ing individual grid "plots" to the plot history should still work). 2. Added "mystrwidth" and "mystrheight" units; basically these just complete the set of units which depend on font, fontsize, and/or lineheight and therefore may refer to the current viewport settings of these parameters OR to the current settings of the grob being drawn. 3. Added unit.rep function (the base rep() function is not generic so I could not simply write a rep.unit method). 4. Added new gpar, "gamma", for gamma-correction of colours (defaults to 1). NOTE that only windows devices will currently respond to on-the-fly changes in gamma. 5. Added "clip" flag to viewports. If "clip" is TRUE, then output is clipped to the viewport. Clipping obeys only the most recent viewport clip setting. For example, if you clip to viewport1, then clip to viewport2, the clipping region is determined wholly by viewport2, the size and shape of viewport1 is irrelevant (until viewport2 is popped of course). If a viewport is rotated (because of its own "angle" setting or because it is within another viewport which is rotated) then the "clip" flag is ignored. 6. The functions grid.start() and grid.stop() have been removed. grid automatically "registers" with devices. 7. Grid no longer automatically opens a device when it is loaded. Instead, a device is created, if there are none open, when the first drawing occurs or when the first viewport is pushed. 8. Added new functions unit.pmin() and unit.pmax() which are unit versions of pmax() and pmin() 9. Added new function grid.place() which provides a simpler interface to grid.pack() and is useful for using grid "frame"s as just a convenient way of defining a layout and sticking things in it. Changes from grid_0.1 to grid_0.2: ---------------------------------- 1. Fixed bug in rotating viewports; this should be more reliable now. 2. Added grid.line.to() and grid.move.to(). These allow drawing BETWEEN different coordinate systems. See example in inst/doc/demo3.ps. 3. Added some more demonstrations to the doc directory. 4. Added more test code to the tests directory. 5. Added "grobwidth" and "grobheight" units. See the document grid/inst/doc/advanced/parentchild.ps 6. Added more detailed documentation to grid/inst/doc/advanced. This stuff is not as friendly for the reader, but may be useful if you're tearing your hair out wondering why some strange effect is occurring. 7. Changed frames and packing to use the new "grobwidth" and "grobheight" units. This fixes some problems with frames and packing. 8. Fixed a bug where the gpar settings for "fontsize" and "lineheight" _within a grob_ would not affect the location or size of the grob if they were specified in "lines" or "char" units. This required adding new "mylines" and "mychar" units (alternative suggestions for names welcome !) so that you can specify whether a grob's a location/size is in terms of the current viewport's fontsize and lineheight ("lines" and "char") or in terms of its own fontsize and lineheight ("mylines" and "mychar"). 9. Added grid.polygon() and grid.circle() primitives 10. Added newpage=TRUE argument to grid.start() so that you can restart grid graphics mode without having to move to a new page. For example, try ... postscript() grid.start() grid.polygon() grid.stop() grid.start() # moves to new page grid.circle() grid.stop() grid.start(newpage=FALSE) # does NOT move to new page grid.rect() grid.stop() dev.off() 11. Changed interface for pop.viewport(). This now just takes a number of viewports to pop, which defaults to 1. For example ... push.viewport(viewport()) pop.viewport(current.viewport()) ... becomes ... push.viewport(viewport()) pop.viewport() ... and ... vp1 <- viewport() vp2 <- viewport() push.viewport(vp1, vp2) pop.viewport(vp2, vp1) ... becomes ... vp1 <- viewport() vp2 <- viewport() push.viewport(vp1, vp2) pop.viewport(2) 12. Speed-up of pushing and popping viewports. This will probably not be noticeable in normal usage, but makes a big difference for frames and packing. Changes from lattice_0.2 to grid_0.1: ------------------------------------- 0. Change of package name from "lattice" to "grid" (!!!!) This means that most user functions have changed from l to grid. 1. Slight speed up of grid.push.viewport and grid.pop.viewport. 2. Added sum() method for units. For example, try ... grid.rect(w=sum(unit(c(.25,.25), "npc"))) grid.rect(w=sum(unit(c(.25,.25), "npc"), unit(1, "cm")), border="red") 3. Changed the usage of grid.edit() slightly. If you want to specify several new values at once, you must use grid.prop.list() rather than just list(). For example, for a single new value use ... grid.edit(, col="red") ... as before, but for multiple new values use ... grid.edit(, grid.prop.list(col="red", lty="dashed")) ... rather than ... grid.edit(, list(col="red", lty="dashed")) 4. Added a new grid.frame() grob. This acts a bit like a simple grid.collection() BUT controls the placement of its children. You add children using the grid.pack() function. 5. All viewports and grobs now have a "gp" slot which contains a "gpar" object. This is a list of graphical parameters, which replaces the specification of individual graphical parameters for each different type of grob. For example, instead of the old ... grid.rect(w=.8, h=.8, border="red") ... we have the new ... grid.rect(w=.8, h=.8, gp=gpar(border="red")) This may seem like a loss (because you have to type more stuff), and it is a loss, but the (hopefully greater) win is that (i) you only have one parameter for all graphical settings, for example, ... grid.rect(w=.8, h=.8, gp=gpar(border="red", lwd=3)) ... and (ii) this applies for all grobs, for example, ... grid.text("hi", gp=gpar(col="red", fontsize=10)) ... and (iii) you can add more graphical parameters with minimal fuss, for example, ... grid.text("hi", gp=gpar(col="red", fontsize=10, new.par=whatever)) ... and (iv) its easier to automate things (see below). Graphical parameter settings are "permanent" so, for example, if an axis sets the colour to "red" then all of its children are drawn in "red" unless they set colour to something else. For example, try ... grid.multipanel(vp = grid.viewport(0.5, 0.5, 0.8, 0.8, gp=gpar(fontsize=20))) ... and notice that all of the components of the multipanel take notice of the fontsize setting of the parent viewport (except the axis labels because they explicitly set the fontsize to 20 themselves). The setting of graphical parameters is automated; if you have a slot called "gp" in your grob, Lattice will set the graphical parameters in that slot before calling draw.details() and unset the parameters afterwards. 6. The pushing and popping of "local" viewports has been automated. If you have a slot called "vp" in your grob, Lattice will call grid.push.viewport() on that slot before calling draw.details() and grid.pop.viewport() afterwards. 7. "collection" grobs and "[x|y]axis" grobs no longer pass editing operations down to their children. This was mainly (only ?) for sharing graphical parameter settings and that duty is now performed by the gpar stuff in point 5 above. This is a good thing because there are some cases where passing down editing operations could cause serious damage. For example, consider what would have happened if you had edited the "vp" slot of a collection grob (!)