# Traditional Chinese translations for RGui.
# Copyright (C) 2005, 06 The R Foundation
# This file is distributed under the same license as the R package.
# <FeiChen@FairIsaac.com>, 2005.
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2005, 06.
#
msgid ""
msgstr ""
"Project-Id-Version: R 2.3.0\n"
"Report-Msgid-Bugs-To: bugs@R-project.org\n"
"POT-Creation-Date: 2011-01-03 16:10+0000\n"
"PO-Revision-Date: 2006-04-14 22:50+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CP950\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: console.c:1157 console.c:1199
msgid "Not enough memory"
msgstr "記憶體不足"

#: console.c:1246 console.c:1250
msgid "Insufficient memory: text not copied to the clipboard"
msgstr "記憶體不足: 文字並未複製到剪貼簿"

#: console.c:1286 ../extra/graphapp/clipboard.c:53
#: ../extra/graphapp/clipboard.c:79
msgid "Unable to open the clipboard"
msgstr "無法開啟剪貼簿"

#: console.c:1904
msgid "Insufficient memory. Please close the console"
msgstr "記憶體不足。請關閉主控台"

#: console.c:1959 console.c:2012 preferences.c:333
#, c-format
msgid ""
"Font %s-%d-%d  not found.\n"
"Using system fixed font"
msgstr ""
"找不到 %s-%d-%d 字型。\n"
"使用系統定寬字型"

#: console.c:2117
msgid "Save selection to"
msgstr "儲存所選部份到"

#: console.c:2119
msgid "Save console contents to"
msgstr "儲存主控台內容到"

#: console.c:2218
msgid "Scrolling.\n"
msgstr "捲動。\n"

#: console.c:2219
msgid "  Keyboard: PgUp, PgDown, Ctrl+Arrows, Ctrl+Home, Ctrl+End,\n"
msgstr "  鍵盤: PgUp、PgDown、Ctrl+方向鍵、Ctrl+Home、Ctrl+End、\n"

#: console.c:2220
msgid ""
"  Mouse: use the scrollbar(s).\n"
"\n"
msgstr ""
"  滑鼠: 使用捲動軸。\n"
"\n"

#: console.c:2221
msgid "Editing.\n"
msgstr "編輯中。\n"

#: console.c:2222
msgid "  Moving the cursor: \n"
msgstr "  移動游標: \n"

#: console.c:2223
msgid "     Left arrow or Ctrl+B: move backward one character;\n"
msgstr "     左箭頭或 Ctrl+B: 左移一字元；\n"

#: console.c:2224
msgid "     Right arrow or Ctrl+F: move forward one character;\n"
msgstr "     右箭頭或Ctrl+F: 右移一字元；\n"

#: console.c:2225
msgid "     Home or Ctrl+A: go to beginning of line;\n"
msgstr "     Home 或 Ctrl+A: 移到列首；\n"

#: console.c:2226
msgid "     End or Ctrl+E: go to end of line;\n"
msgstr "     End 或 Ctrl+E: 移到列尾；\n"

#: console.c:2227
msgid "  History: Up and Down Arrows, Ctrl+P, Ctrl+N\n"
msgstr "  命令歷程: 上、下箭頭、Ctrl+P、Ctrl+N\n"

#: console.c:2228
msgid "  Deleting:\n"
msgstr "  刪除中:\n"

#: console.c:2229
#, fuzzy
msgid "     Del or Ctrl+D: delete current character or selection;\n"
msgstr "     Del 或 Ctrl+D: 刪除目前位置所在字元；\n"

#: console.c:2230
msgid "     Backspace: delete preceding character;\n"
msgstr "     Backspace: 刪除目前位置之前的字元；\n"

#: console.c:2231
msgid ""
"     Ctrl+Del or Ctrl+K: delete text from current character to end of line.\n"
msgstr "     Ctrl+Del 或 Ctrl+K: 刪除目前位置到列尾的所有文字。\n"

#: console.c:2232
msgid "     Ctrl+U: delete all text from current line.\n"
msgstr "     Ctrl+U: 從目前所在列開始刪除所有的文字。\n"

#: console.c:2233
msgid "  Copy and paste.\n"
msgstr "  複製和貼上。\n"

#: console.c:2234
msgid ""
"     Use the mouse (with the left button held down) to mark (select) text.\n"
msgstr "     用滑鼠 (持續按著左鍵) 來選擇文字。\n"

#: console.c:2235
msgid ""
"     Use Shift+Del (or Ctrl+C) to copy the marked text to the clipboard and\n"
msgstr "     用 Shift+Del (或 Ctrl+C) 把選擇好的文字複製到剪貼簿以及\n"

#: console.c:2236
msgid ""
"     Shift+Ins (or Ctrl+V or Ctrl+Y) to paste the content of the clipboard "
"(if any)  \n"
msgstr ""
"     用 Shift+Ins (或 Ctrl+V 或 Ctrl+Y) 來貼上剪貼簿的內容 (如果有的話)  \n"

#: console.c:2237
msgid "     to the console, Ctrl+X first copy then paste\n"
msgstr "     到主控台，Ctrl+X 先複製再貼上\n"

#: console.c:2238
msgid "  Misc:\n"
msgstr "  其它:\n"

#: console.c:2239
msgid "     Ctrl+L: Clear the console.\n"
msgstr "     Ctrl+L: 清除主控台。\n"

#: console.c:2240
#, fuzzy
msgid "     Ctrl+O or INS: Toggle overwrite mode: initially off.\n"
msgstr "     Ctrl+O: 切換覆寫狀態: 最初是關掉的。\n"

#: console.c:2241
msgid "     Ctrl+T: Interchange current char with one to the left.\n"
msgstr "     Ctrl+T: 將目前所在位置的字元與其左方的字元交換。\n"

#: console.c:2242
msgid ""
"\n"
"Note: Console is updated only when some input is required.\n"
msgstr ""
"\n"
"注意: 只有在要求輸入時主控台才會被更新。\n"

#: console.c:2243
msgid ""
"  Use Ctrl+W to toggle this feature off/on.\n"
"\n"
msgstr ""
"  使用 Ctrl+W 來開關此一功能。\n"
"\n"

#: console.c:2244
msgid ""
"Use ESC to stop the interpreter.\n"
"\n"
msgstr ""
"使用 ESC 來停止解譯器。\n"
"\n"

#: console.c:2245
msgid ""
"TAB starts completion of the current word.\n"
"\n"
msgstr ""

#: console.c:2246
msgid "Standard Windows hotkeys can be used to switch to the\n"
msgstr "可以用 Windows 的標準快捷鍵來轉換\n"

#: console.c:2247
msgid "graphics device (Ctrl+Tab or Ctrl+F6 in MDI, Alt+Tab in SDI)"
msgstr "繪圖裝置 (MDI 用 Ctrl+Tab 或 Ctrl+F6，SDI 用 Alt+Tab)"

#: dataentry.c:223 dataentry.c:1851 dataentry.c:1854 dataentry.c:1885
msgid "invalid argument"
msgstr "引數不正確"

#: dataentry.c:270
msgid "invalid type for value"
msgstr "值的類型不正確"

#: dataentry.c:281
msgid "Data Editor"
msgstr "資料編輯器"

#: dataentry.c:282 dataentry.c:1892
msgid "invalid device"
msgstr "裝置發生錯誤"

#: dataentry.c:331
msgid "dataentry: internal memory problem"
msgstr "dataentry: 內部記憶體問題"

#: dataentry.c:634 dataentry.c:1221
msgid "dataentry: internal memory error"
msgstr "dataentry: 內部記憶體錯誤"

#: dataentry.c:757 dataentry.c:770
msgid "internal type error in dataentry"
msgstr "dataentry 內部類型發生錯誤"

#: dataentry.c:852
#, fuzzy
msgid "dataentry: parse error on string"
msgstr "dataentry: 運算式太長"

#: dataentry.c:995
msgid "dataentry: expression too long"
msgstr "dataentry: 運算式太長"

#: dataentry.c:1472
msgid "column names cannot be blank"
msgstr "欄名不能是空白的"

#: dataentry.c:1518
msgid "Variable editor"
msgstr "變數編輯器"

#: dataentry.c:1523
msgid "variable name"
msgstr "變數名稱"

#: dataentry.c:1525
msgid "type"
msgstr "類型"

#: dataentry.c:1639
msgid "Cell width(s)"
msgstr "單元格寬"

#: dataentry.c:1645
msgid "Cell width"
msgstr "單元格寬"

#: dataentry.c:1648
msgid "variable"
msgstr "變數"

#: dataentry.c:1691
msgid ""
"Navigation.\n"
"  Keyboard: cursor keys move selection\n"
"\tTab move right, Shift+Tab moves left\n"
"\tPgDn or Ctrl+F: move down one screenful\n"
"\tPgUp or Ctrl+B: move up one screenful\n"
"\tHome: move to (1,1) cell\n"
"\tEnd: show last rows of last column.\n"
"   Mouse: left-click in a cell, use the scrollbar(s).\n"
"\n"
"Editing.\n"
"  Type in the currently hightlighted cell\n"
"  Double-click in a cell for an editable field\n"
"\n"
"Misc.\n"
"  Ctrl-L redraws the screen, auto-resizing the columns\n"
"  Ctrl-C copies selected cell\n"
"  Ctrl-V pastes to selected cell\n"
"  Right-click menu for copy, paste, autosize currently selected column\n"
"\n"
msgstr ""
"導引。\n"
"  鍵盤: 游標鍵用來移動選擇的內容\n"
"\tTab 右移, Shift+Tab 左移\n"
"\tPgDn 或 Ctrl+F: 整個畫面下移\n"
"\tPgUp 或 Ctrl+B: 整個畫面上移\n"
"\tHome: 移到 (1,1) 位置\n"
"\tEnd: 顯示最後一欄的最後一列。\n"
"   滑鼠: 在單元格裡按左鍵，使用捲軸。\n"
"\n"
"編輯。\n"
"  寫入目前選擇的單元格裡\n"
"  在單元格裡按兩下來對欄位進行編輯\n"
"\n"
"其它。\n"
"  Ctrl-L 重新整理螢幕，自動調整欄的大小\n"
"  Ctrl-C 複製選擇的單元格\n"
"  Ctrl-V 貼到選擇的單元格\n"
"  右鍵選單用來複製、貼上、讓所選擇的欄自己調整大小\n"
"\n"

#: dataentry.c:1697 dataentry.c:1807 editor.c:778 rui.c:1196
msgid "Help"
msgstr "輔助"

#: dataentry.c:1699
msgid "Copy selected cell"
msgstr "複製所選的單元格"

#: dataentry.c:1700
msgid "Paste to selected cell"
msgstr "貼到所選擇的單元格"

#: dataentry.c:1701
msgid "Autosize column"
msgstr "自動調節欄的大小"

#: dataentry.c:1703 pager.c:310 rui.c:878
#: ../library/grDevices/src/devWindows.c:1632
msgid "Stay on top"
msgstr "視窗保持在最上層"

#: dataentry.c:1705 dataentry.c:1792 pager.c:312 pager.c:475
msgid "Close"
msgstr "關閉"

#: dataentry.c:1790 editor.c:724 pager.c:467 rui.c:1132
#: ../library/grDevices/src/devWindows.c:1572
msgid "File"
msgstr "檔案"

#: dataentry.c:1796 editor.c:742 pager.c:477 rui.c:1153
msgid "Edit"
msgstr "編輯"

#: dataentry.c:1797
msgid "Copy  \tCTRL+C"
msgstr "複製  \tCTRL+C"

#: dataentry.c:1799
msgid "Paste \tCTRL+V"
msgstr "貼上 \tCTRL+V"

#: dataentry.c:1801
msgid "Delete\tDEL"
msgstr "刪除\tDEL"

#: dataentry.c:1804
msgid "Cell widths ..."
msgstr "單元格寬..."

#: dataentry.c:1808
msgid "Data editor"
msgstr "資料編輯器"

#: editor.c:88 editor.c:90
#, fuzzy
msgid "R Editor"
msgstr "編輯器"

#: editor.c:119
#, fuzzy, c-format
msgid "unable to open file %s for reading"
msgstr "無法開啟剪貼簿"

#: editor.c:135
#, c-format
msgid "Could not read from file '%s'"
msgstr ""

#: editor.c:166
#, c-format
msgid "Could not save file '%s'"
msgstr ""

#: editor.c:182
#, fuzzy
msgid "Save script as"
msgstr "儲存命令稿"

#: editor.c:372 editor.c:689 pager.c:431 rui.c:1086
msgid "Open script"
msgstr "開啟命令稿"

#: editor.c:495 pager.c:185 pager.c:205
msgid "No RGui console to paste to"
msgstr "沒有可以貼上的 RGui 主控台"

#: editor.c:597
msgid "R EDITOR\n"
msgstr "R 編輯器\n"

#: editor.c:599
msgid "A standard text editor for editing and running R code.\n"
msgstr "一個用於編輯和執行 R 程式的標準文字編輯器。\n"

#: editor.c:601
msgid "RUNNING COMMANDS\n"
msgstr "執行命令\n"

#: editor.c:602
msgid "To run a line or section of R code, select the code and either\n"
msgstr "要執行一列或一段 R 的程式碼，先選擇所需要的程式碼，然後再\n"

#: editor.c:603
msgid "     Press Ctrl-R\n"
msgstr "     按 Ctrl-R\n"

#: editor.c:604
msgid "     Select \"Run line or selection\" from the \"Edit\" menu\n"
msgstr "     從「編輯」選單中選擇「執行程式列或選擇項」\n"

#: editor.c:605
msgid "     Press the \"Run line or selection\" icon on the toolbar\n"
msgstr "     按工具列上的「執行程式列或選擇項」按鈕\n"

#: editor.c:606
msgid ""
"This will copy the selected commands to the console and evaluate them.\n"
msgstr "這會把選擇的命令複製到主控台來予以執行。\n"

#: editor.c:607
msgid ""
"If there is no selection, this will just run the current line and advance\n"
msgstr "如果沒有選擇的話，目前所在列的命令會被執行\n"

#: editor.c:608
msgid "the cursor by one line.\n"
msgstr "游標所在列。\n"

#: editor.c:620 editor.c:697 editor.c:758
msgid "Run line or selection"
msgstr "執行程式列或選擇項"

#: editor.c:622 editor.c:743
msgid "Undo"
msgstr "復原"

#: editor.c:624 editor.c:746
msgid "Cut"
msgstr "剪下"

#: editor.c:625 editor.c:748 pager.c:305 pager.c:478 rui.c:868 rui.c:1098
#: rui.c:1154
msgid "Copy"
msgstr "複製"

#: editor.c:626 editor.c:750 rui.c:869 rui.c:1102 rui.c:1155
msgid "Paste"
msgstr "貼上"

#: editor.c:627 editor.c:752
msgid "Delete"
msgstr "刪除"

#: editor.c:629 editor.c:754 pager.c:308 pager.c:484 rui.c:875 rui.c:1159
msgid "Select all"
msgstr "全部選取"

#: editor.c:693
msgid "Save script"
msgstr "儲存命令稿"

#: editor.c:701 pager.c:451 ../library/grDevices/src/devWindows.c:1540
msgid "Return focus to Console"
msgstr "回復焦點到主控台"

#: editor.c:704
msgid "Print script"
msgstr "列印命令稿"

#: editor.c:706 pager.c:446 rui.c:1114
#: ../library/grDevices/src/devWindows.c:1534
msgid "Print"
msgstr "列印"

#: editor.c:725 pager.c:468 rui.c:1134
msgid "New script"
msgstr "建立新的命令稿"

#: editor.c:727 pager.c:469 rui.c:1135
msgid "Open script..."
msgstr "開啟命令稿..."

#: editor.c:729
msgid "Save"
msgstr "儲存"

#: editor.c:731
msgid "Save as..."
msgstr "另存為..."

#: editor.c:734 pager.c:470 rui.c:1148
#: ../library/grDevices/src/devWindows.c:1635
msgid "Print..."
msgstr "列印..."

#: editor.c:737
msgid "Close script"
msgstr "關閉命令稿"

#: editor.c:756 rui.c:1160
msgid "Clear console"
msgstr "清空主控台"

#: editor.c:760
msgid "Run all"
msgstr "執行全部"

#: editor.c:763
msgid "Find..."
msgstr "尋找..."

#: editor.c:765
msgid "Replace..."
msgstr "替換..."

#: editor.c:768 rui.c:1164
msgid "GUI preferences..."
msgstr "GUI 偏好設定..."

#: editor.c:779
msgid "Editor"
msgstr "編輯器"

#: editor.c:838
msgid "Maximum number of editors reached"
msgstr "編輯器數量太多"

#: editor.c:843
msgid "Unable to create editor window"
msgstr "無法建立編輯器視窗"

#: editor.c:851
msgid "Untitled"
msgstr "未命名"

#: extra.c:888 ../extra/graphapp/dialogs.c:618 ../extra/graphapp/dialogs.c:737
msgid "OK"
msgstr "確定"

#: extra.c:889 ../extra/graphapp/dialogs.c:598 ../extra/graphapp/dialogs.c:616
#: ../extra/graphapp/dialogs.c:622 ../extra/graphapp/dialogs.c:721
#: ../extra/graphapp/dialogs.c:735 ../extra/graphapp/dialogs.c:741
msgid "Cancel"
msgstr "取消"

#: extra.c:2106 rui.c:1234
msgid "Select file"
msgstr "選擇檔案"

#: pager.c:89
msgid "Error opening file"
msgstr "開啟檔案時發生錯誤"

#: pager.c:96
msgid "Insufficient memory to display file in internal pager"
msgstr "用內部頁面切換程式來顯示檔案時記憶體不足"

#: pager.c:177 pager.c:189 pager.c:209 rui.c:235 rui.c:262
msgid "No selection"
msgstr "沒有選擇"

#: pager.c:306 pager.c:436 pager.c:480
msgid "Paste to console"
msgstr "貼到主控台"

#: pager.c:307 pager.c:441 pager.c:482
msgid "Paste commands to console"
msgstr "貼上命令到主控台"

#: pager.c:472 rui.c:1149
msgid "Save to File..."
msgstr "儲存到檔案..."

#: pager.c:487 rui.c:1166
msgid "View"
msgstr "看"

#: pager.c:519
msgid "Unable to create pager window"
msgstr "無法建立頁面切換程式視窗"

#: preferences.c:302
msgid ""
"The overall console properties cannot be changed\n"
"on a running console.\n"
"\n"
"Save the preferences and restart Rgui to apply them.\n"
msgstr ""
"無法變更正在執行中的終端機泛用性質。\n"
"\n"
"將偏好設定儲存之後重新啟動 Rgui 以套用它們。\n"

#: preferences.c:306
#, fuzzy
msgid ""
"The language for menus cannot be changed on a\n"
" running console.\n"
"\n"
"Save the preferences and restart Rgui to apply to menus.\n"
msgstr ""
"無法變更正在執行中的終端機泛用性質。\n"
"\n"
"將偏好設定儲存之後重新啟動 Rgui 以套用它們。\n"

#: preferences.c:371
msgid "Changes in pager size will not apply to any open pagers"
msgstr "頁面切換程式的大小變更將不會套用至任何開啟的頁面之上"

#: preferences.c:377
msgid ""
"Do not change pager type if any pager is open\n"
"Proceed?"
msgstr ""
"如果任何頁面切換程式是開啟的，就不要變更頁面的型態。\n"
"要繼續嗎？"

#: preferences.c:410
msgid "Select directory for file 'Rconsole'"
msgstr "為檔案 'Rconsole' 選擇目錄"

#: preferences.c:503
msgid "Select 'Rconsole' file"
msgstr "選擇 'Rconsole' 檔案"

#: preferences.c:688
#, fuzzy, c-format
msgid "Ignored '%s' at line %d of file %s"
msgstr "檔案 %2$s 的第 %1$d 列發生錯誤"

#: preferences.c:789
msgid "Rgui Configuration Editor"
msgstr "Rgui 配置編輯器"

#: rui.c:138
msgid "Select file to source"
msgstr "選擇要輸入的程式檔案"

#: rui.c:159
msgid "Select image to load"
msgstr "選擇要載入的圖案"

#: rui.c:174
msgid "Save image in"
msgstr "儲存圖案到"

#: rui.c:188
msgid "Load history from"
msgstr "載入命令歷程自"

#: rui.c:197
msgid "Save history in"
msgstr "儲存命令歷程到"

#: rui.c:244 rui.c:253
msgid "No text available"
msgstr "沒有可用文字"

#: rui.c:302
msgid "Name of data frame or matrix"
msgstr "資料框或矩陣名"

#: rui.c:309
#, c-format
msgid "'%s' cannot be found"
msgstr "找不到 '%s'"

#: rui.c:448
msgid "Are you sure?"
msgstr "您肯定嗎?"

#: rui.c:560
msgid "Help on"
msgstr "求助於"

#: rui.c:611
msgid "Search help"
msgstr "搜尋輔助"

#: rui.c:626
msgid "Search for words in help list archives and documentation"
msgstr "搜尋文字於郵件清單檔案和文件"

#: rui.c:641
msgid "Apropos"
msgstr "關於"

#: rui.c:864
msgid "Can only drag-and-drop .R, .RData and .rda files"
msgstr "滑鼠拖放只適用於 .R、.RData 和 .rda 字尾的檔案"

#: rui.c:870 rui.c:1156
msgid "Paste commands only"
msgstr "只能用貼上命令"

#: rui.c:871 rui.c:1106
msgid "Copy and paste"
msgstr "複製和貼上"

#: rui.c:873
msgid "Clear window"
msgstr "清除視窗"

#: rui.c:877 rui.c:1179
msgid "Buffered output"
msgstr "緩衝區輸出"

#: rui.c:917
msgid "Packages"
msgstr "程式套件"

#: rui.c:918
msgid "Load package..."
msgstr "載入程式套件..."

#: rui.c:920
msgid "Set CRAN mirror..."
msgstr "設定 CRAN 鏡像..."

#: rui.c:922
msgid "Select repositories..."
msgstr "選擇存放處..."

#: rui.c:924
msgid "Install package(s)..."
msgstr "安裝程式套件..."

#: rui.c:926
msgid "Update packages..."
msgstr "更新程式套件..."

#: rui.c:929
msgid "Install package(s) from local zip files..."
msgstr "用本機的 zip 檔案來安裝程式套件..."

#: rui.c:957
msgid "FAQ on R"
msgstr "關於 R 的 FAQ"

#: rui.c:959
msgid "FAQ on R for &Windows"
msgstr "關於 Windows 上 R 的 FAQ(&W)"

#: rui.c:965 rui.c:968
msgid "Manuals (in PDF)"
msgstr "手冊 (PDF檔案)"

#: rui.c:995
msgid "R functions (text)..."
msgstr "R 函式 (文字檔案)..."

#: rui.c:997
msgid "Html help"
msgstr "Html 輔助"

#: rui.c:999
msgid "Search help..."
msgstr "搜尋輔助..."

#: rui.c:1004
msgid "Apropos..."
msgstr "關於..."

#: rui.c:1006
msgid "R Project home page"
msgstr "R 首頁"

#: rui.c:1007
msgid "CRAN home page"
msgstr "CRAN 首頁"

#: rui.c:1009
msgid "About"
msgstr "關於"

#: rui.c:1018 ../extra/graphapp/gmenus.c:52
msgid "Windows"
msgstr "視窗"

#: rui.c:1019 ../extra/graphapp/gmenus.c:53
msgid "Cascade"
msgstr "層疊"

#: rui.c:1020 ../extra/graphapp/gmenus.c:54
msgid "Tile &Horizontally"
msgstr ""

#: rui.c:1021 ../extra/graphapp/gmenus.c:55
msgid "Tile &Vertically"
msgstr ""

#: rui.c:1022
msgid "Minimize group"
msgstr ""

#: rui.c:1023
msgid "Restore group"
msgstr ""

#: rui.c:1090
#, fuzzy
msgid "Load workspace"
msgstr "載入工作空間..."

#: rui.c:1094
#, fuzzy
msgid "Save workspace"
msgstr "儲存工作空間..."

#: rui.c:1110
msgid "Stop current computation"
msgstr "停止目前的計算"

#: rui.c:1133
msgid "Source R code..."
msgstr "輸入 R 程式碼..."

#: rui.c:1136
msgid "Display file(s)..."
msgstr "顯示檔案..."

#: rui.c:1138
msgid "Load Workspace..."
msgstr "載入工作空間..."

#: rui.c:1139
msgid "Save Workspace..."
msgstr "儲存工作空間..."

#: rui.c:1141
msgid "Load History..."
msgstr "載入命令歷程..."

#: rui.c:1143
msgid "Save History..."
msgstr "儲存命令歷程..."

#: rui.c:1146
msgid "Change dir..."
msgstr "變更現行目錄..."

#: rui.c:1151
msgid "Exit"
msgstr "離開"

#: rui.c:1158
msgid "Copy and Paste"
msgstr "複製和貼上"

#: rui.c:1162
msgid "Data editor..."
msgstr "資料編輯器..."

#: rui.c:1167
msgid "Toolbar"
msgstr ""

#: rui.c:1168
msgid "Statusbar"
msgstr ""

#: rui.c:1172
msgid "Misc"
msgstr "其它"

#: rui.c:1173
msgid "Stop current computation           \tESC"
msgstr "停止目前的計算           \tESC"

#: rui.c:1175
#, fuzzy
msgid "Stop all computations"
msgstr "停止目前的計算"

#: rui.c:1177
msgid "Break to debugger"
msgstr "暫停進入偵錯器"

#: rui.c:1180
msgid "Word completion"
msgstr ""

#: rui.c:1182
msgid "Filename completion"
msgstr ""

#: rui.c:1189
msgid "List objects"
msgstr "列出目的物件"

#: rui.c:1190
msgid "Remove all objects"
msgstr "刪除所有的目的物件"

#: rui.c:1191
#, fuzzy
msgid "List search &path"
msgstr "列出搜尋路徑(&S)"

#: rui.c:1197
msgid "Console"
msgstr "主控台"

#: rui.c:1278
msgid "'mname' is limited to 1000 bytes"
msgstr "'mname' 的長度最多只能有 1000 個字元"

#: rui.c:1320
#, c-format
msgid "menu %s does not exist"
msgstr "%s 選單不存在"

#: rui.c:1373
msgid "'menu' is limited to 500 bytes"
msgstr "'menu' 的長度最多只能有 500 個字元"

#: rui.c:1383
msgid "base menu does not exist"
msgstr "基本選單不存在"

#: rui.c:1398
msgid "failed to allocate menu"
msgstr "無法配置選單"

#: rui.c:1415 rui.c:1539
msgid "menu + item is limited to 1000 bytes"
msgstr "菜單＋項目的長度只能在 1000 個字元內"

#: rui.c:1423 rui.c:1506
msgid "menu does not exist"
msgstr "沒有此一選單"

#: rui.c:1441 rui.c:1464 rui.c:1469
msgid "failed to allocate char storage"
msgstr "配置字元儲存器失敗"

#: rui.c:1477
msgid "failed to allocate menuitem"
msgstr "配置選單項失敗"

#: rui.c:1529
msgid "menu not found"
msgstr "找不到選單"

#: rui.c:1547
msgid "menu or item does not exist"
msgstr "選單或是項目不存在"

#: system.c:441
msgid "Save workspace image?"
msgstr "儲存工作空間圖案?"

#: ../extra/graphapp/clipboard.c:69 ../extra/graphapp/clipboard.c:73
msgid "Insufficient memory: cell not copied to the clipboard"
msgstr "記憶體不足: 單元格沒有複製到剪貼簿"

#: ../extra/graphapp/dialogs.c:143 ../extra/graphapp/dialogs.c:160
#: ../extra/graphapp/dialogs.c:177
msgid "Question"
msgstr "問題"

#: ../extra/graphapp/dialogs.c:198
msgid " Change working directory to:"
msgstr " 現行目錄改成："

#: ../extra/graphapp/dialogs.c:201
#, c-format
msgid "Unable to set '%s' as working directory"
msgstr "無法將 '%s' 設成現行目錄"

#: ../extra/graphapp/dialogs.c:729
msgid "User"
msgstr "使用者"

#: ../extra/graphapp/dialogs.c:730
msgid "Password"
msgstr "密碼"

#: ../extra/graphapp/dialogs.c:896 ../extra/graphapp/dialogs.c:902
#, c-format
msgid "\"%s\" not found"
msgstr "找不到 \"%s\""

#: ../extra/graphapp/gmenus.c:56
msgid "Arrange Icons"
msgstr "排列圖示"

#: ../library/grDevices/src/devWindows.c:879
msgid "Portable network graphics file"
msgstr "Portable network graphics 檔案"

#: ../library/grDevices/src/devWindows.c:882
msgid "Windows bitmap file"
msgstr "Windows bitmap 檔案"

#: ../library/grDevices/src/devWindows.c:885
#, fuzzy
msgid "TIFF file"
msgstr "PDF 檔案"

#: ../library/grDevices/src/devWindows.c:888
msgid "Jpeg file"
msgstr "Jpeg 檔案"

#: ../library/grDevices/src/devWindows.c:910
msgid "Postscript file"
msgstr "Postscript 檔案"

#: ../library/grDevices/src/devWindows.c:922
msgid "PDF file"
msgstr "PDF 檔案"

#: ../library/grDevices/src/devWindows.c:934
msgid "Enhanced metafiles"
msgstr "Enhanced metafiles"

#: ../library/grDevices/src/devWindows.c:937
#: ../library/grDevices/src/devWindows.c:3396
msgid "file path selected is too long: only 512 bytes are allowed"
msgstr "選擇的檔案路徑太長：最多只能有 512 位元組"

#: ../library/grDevices/src/devWindows.c:1148
msgid "No plot to replace!"
msgstr "沒有可替換的圖表!"

#: ../library/grDevices/src/devWindows.c:1196
msgid "Variable name"
msgstr "變數名"

#: ../library/grDevices/src/devWindows.c:1203
msgid "Variable doesn't exist or doesn't contain any plots!"
msgstr "變數不存在或不包含任何圖表!"

#: ../library/grDevices/src/devWindows.c:1219
msgid "Name of variable to save to"
msgstr "要儲存進去的變數名"

#: ../library/grDevices/src/devWindows.c:1528
msgid "Copy to the clipboard as a metafile"
msgstr "做為 metafile 複製到剪貼簿"

#: ../library/grDevices/src/devWindows.c:1546
#: ../library/grDevices/src/devWindows.c:1557
msgid "Stop locator"
msgstr "停止定位器"

#: ../library/grDevices/src/devWindows.c:1556
#: ../library/grDevices/src/devWindows.c:1560
msgid "Stop"
msgstr "停止"

#: ../library/grDevices/src/devWindows.c:1562
msgid "Continue"
msgstr "繼續"

#: ../library/grDevices/src/devWindows.c:1566
msgid "Next"
msgstr "下一個"

#: ../library/grDevices/src/devWindows.c:1567
msgid "Next plot"
msgstr "下一個圖表"

#: ../library/grDevices/src/devWindows.c:1573
msgid "Save as"
msgstr "儲存為"

#: ../library/grDevices/src/devWindows.c:1582
#: ../library/grDevices/src/devWindows.c:1584
#: ../library/grDevices/src/devWindows.c:1586
#, c-format
msgid "%s quality..."
msgstr "%s 印刷品質..."

#: ../library/grDevices/src/devWindows.c:1588
msgid "Copy to the clipboard"
msgstr "複製到剪貼簿"

#: ../library/grDevices/src/devWindows.c:1589
msgid "as a Bitmap\tCTRL+C"
msgstr "做為 Bitmap\tCTRL+C"

#: ../library/grDevices/src/devWindows.c:1590
msgid "as a Metafile\tCTRL+W"
msgstr "做為 Metafile\tCTRL+W"

#: ../library/grDevices/src/devWindows.c:1593
msgid "Print...\tCTRL+P"
msgstr "列印...\tCTRL+P"

#: ../library/grDevices/src/devWindows.c:1595
msgid "close Device"
msgstr "關閉裝置"

#: ../library/grDevices/src/devWindows.c:1596
msgid "History"
msgstr "命令歷程"

#: ../library/grDevices/src/devWindows.c:1597
msgid "Recording"
msgstr "記錄"

#: ../library/grDevices/src/devWindows.c:1600
msgid "Add\tINS"
msgstr "加入\tINS"

#: ../library/grDevices/src/devWindows.c:1601
msgid "Replace"
msgstr "替換"

#: ../library/grDevices/src/devWindows.c:1603
msgid "Previous\tPgUp"
msgstr "上一個\tPgUp"

#: ../library/grDevices/src/devWindows.c:1604
msgid "Next\tPgDown"
msgstr "下一個\tPgDown"

#: ../library/grDevices/src/devWindows.c:1606
msgid "Save to variable..."
msgstr "儲存到變數..."

#: ../library/grDevices/src/devWindows.c:1607
msgid "Get from variable..."
msgstr "擷取自變數..."

#: ../library/grDevices/src/devWindows.c:1609
msgid "Clear history"
msgstr "清除命令歷程"

#: ../library/grDevices/src/devWindows.c:1610
msgid "Resize"
msgstr "重設大小"

#: ../library/grDevices/src/devWindows.c:1611
msgid "R mode"
msgstr "R 模式"

#: ../library/grDevices/src/devWindows.c:1613
msgid "Fit to window"
msgstr "適合視窗大小"

#: ../library/grDevices/src/devWindows.c:1615
msgid "Fixed size"
msgstr "固定的大小"

#: ../library/grDevices/src/devWindows.c:1622
msgid "Copy as metafile"
msgstr "複製成 metafile"

#: ../library/grDevices/src/devWindows.c:1624
msgid "Copy as bitmap"
msgstr "複製成 bitmap"

#: ../library/grDevices/src/devWindows.c:1627
msgid "Save as metafile..."
msgstr "儲存成 metafile..."

#: ../library/grDevices/src/devWindows.c:1629
msgid "Save as postscript..."
msgstr "儲存成 postscript..."

#: ../library/grDevices/src/devWindows.c:3117
msgid "Locator is active"
msgstr "定位器在啟用狀態"

#: ../library/grDevices/src/devWindows.c:3746
msgid "Waiting to confirm page change..."
msgstr "等待頁面變更的確認..."

#: ../library/grDevices/src/devWindows.c:3758
msgid "Click or hit ENTER for next page"
msgstr "按 ENTER 來看下一頁"

#, fuzzy
#~ msgid "Html search page"
#~ msgstr "列出搜尋路徑(&S)"

#~ msgid "Tile"
#~ msgstr "平舖"

#~ msgid "Postscript files (*.ps)"
#~ msgstr "Postscript 檔案 (*.ps)"

#~ msgid "PDF files (*.pdf)"
#~ msgstr "PDF 檔案 (*.pdf)"

#~ msgid "Enhanced metafiles (*.emf)"
#~ msgstr "Enhanced metafiles (*.emf)"

#, fuzzy
#~ msgid "Install source package from local folder..."
#~ msgstr "用本機的 zip 檔案來安裝程式套件..."

#~ msgid "Png files (*.png)"
#~ msgstr "Png 檔案 (*.png)"

#~ msgid "Windows bitmap files (*.bmp)"
#~ msgstr "Windows bitmap 檔案 (*.bmp)"

#, fuzzy
#~ msgid "TIFF files (*.tiff,*tif)"
#~ msgstr "PDF 檔案 (*.pdf)"

#~ msgid "Jpeg files (*.jpeg,*jpg)"
#~ msgstr "Jpeg 檔案 (*.jpeg,*jpg)"

#~ msgid "Metafile..."
#~ msgstr "Metafile..."

#~ msgid "Postscript..."
#~ msgstr "Postscript..."

#~ msgid "PDF..."
#~ msgstr "PDF..."

#~ msgid "Png..."
#~ msgstr "Png..."

#~ msgid "Bmp..."
#~ msgstr "Bmp..."

#, fuzzy
#~ msgid "TIFF..."
#~ msgstr "PDF..."

#~ msgid "Jpeg"
#~ msgstr "Jpeg"

#~ msgid "Load image"
#~ msgstr "載入圖案"

#~ msgid "Save image"
#~ msgstr "儲存圖案"

#~ msgid "Apply"
#~ msgstr "套用"

#, fuzzy
#~ msgid "Save..."
#~ msgstr "另存為..."

#, fuzzy
#~ msgid "Load..."
#~ msgstr "載入"

#~ msgid "75% quality..."
#~ msgstr "75% 印刷品質..."

#~ msgid "100% quality..."
#~ msgstr "100% 印刷品質..."

#~ msgid "Select working directory"
#~ msgstr "選擇現行目錄"