Previous: (dir), Up: (dir)

1 General Information: README

This is the README file for the distribution of ESS version

5.2.8

ESS is a GNU Emacs and XEmacs mode for interactive statistical programming and data analysis. Languages supported: the S family (S 3/4, S-PLUS 3/4/5/6/7, and R), SAS, XLispStat, Stata and BUGS. Installation help can be found in sections for both Unix and Windows. ESS grew out of the desire for bug fixes and extensions to S-mode and SAS-mode as well as a consistent union of their features in one package.

The current development team is led by Martin Maechler since August 2004. Former project leader A.J. (Tony) Rossini (rossini@blindglobe.net) did the initial port to XEmacs and has been the primary coder. Martin Maechler (maechler@stat.math.ethz.ch) and Kurt Hornik (Kurt.Hornik@R-project.org) have assisted with S-PLUS, S4, R, and XLispStat. Stephen Eglen (stephen@gnu.org) has worked mostly on R support. Richard M. Heiberger (rmh@temple.edu) has assisted with S-PLUS and S4 development for Windows. Richard and Rodney A. Sparapani (rsparapa@mcw.edu) have done much of the work implementing interactive SAS (iESS[SAS]) and batch SAS (ESS[SAS]) support.

We are grateful to the previous developers of S-mode (Doug Bates, Ed Kademan, Frank Ritter, David M. Smith), SAS-mode (Tom Cook) and Stata-mode (Thomas Lumley).

Next: , Previous: General Information, Up: General Information

1.1 License

ESS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.

ESS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License in the file COPYING in the same directory as this file for more details.

Next: , Previous: License, Up: General Information

1.2 New Features

Changes/New Features in 5.2.8:

Changes/New Features in 5.2.7:

Changes/New Features in 5.2.6:

Changes/New Features in 5.2.5:

Changes/New Features in 5.2.4:

Changes/New Features in 5.2.3:

Changes/New Features in 5.2.2:

Changes/New Features in 5.2.1:

Changes/New Features in 5.2.0:

Changes/New Features in 5.1.24:

Changes/New Features in 5.1.23:

Changes/New Features in 5.1.22:

Changes/New Features in 5.1.21:

Changes/New Features in 5.1.20:

Changes/New Features in 5.1.19:

Changes/New Features in 5.1.18:

Changes/New Features in 5.1.17:

Changes/New Features in 5.1.16:

Changes/New Features in 5.1.15:

Changes/New Features in 5.1.14:

Changes/New Features in 5.1.13:

Changes/New Features in 5.1.12:

Changes/New Features in 5.1.11:

Changes/New Features in 5.1.10:

Changes/New Features in 5.1.9:

Changes/New Features in 5.1.8:

Changes/New Features in 5.1.2:

Next: , Previous: New Features, Up: General Information

1.3 Current Features

Next: , Previous: Current Features, Up: General Information

1.4 Stability

Versions 5.2.x are meant to be release-quality versions. While some new features are being introduced, we are cleaning up and improving the interface. We know about some remaining documentation inconsistencies. Patches or suggested fixes with bug reports are much appreciated!

Next: , Previous: Stability, Up: General Information

1.5 Requirements

ESS has been tested with

on the following platforms

with the following versions of emacs

Next: , Previous: Requirements, Up: General Information

1.6 Getting the Latest Version

The latest released version of ESS is always available on the web at: ESS web page or StatLib

The latest development version of ESS is available via https://svn.R-project.org/ESS/, the ESS Subversion repository. If you have a Subversion client (see http://subversion.tigris.org/), you can download the sources using: 

     % svn checkout https://svn.r-project.org/ESS/trunk path

which will put the ESS files into directory path. Later, within that directory, `svn update' will bring that directory up to date. Windows-based tools such as TortoiseSVN are also available for downloading the files. Alternatively, you can browse the sources with a web browser at: ESS SVN site. However, please use a subversion client instead to minimize the load when retrieving.

If you remove other versions of ESS from your emacs load-path, you can then use the development version by adding the following to .emacs: 

     (load "/path/to/ess-svn/lisp/ess-site.el")

Note that https is required, and that the SSL certificate for the Subversion server of the R project is 

     Certificate information:
      - Hostname: svn.r-project.org
      - Valid: from Jul 16 08:10:01 2004 GMT until Jul 14 08:10:01 2014 GMT
      - Issuer: Department of Mathematics, ETH Zurich, Zurich, Switzerland, CH
      - Fingerprint: c9:5d:eb:f9:f2:56:d1:04:ba:44:61:f8:64:6b:d9:33:3f:93:6e:ad

(currently, there is no “trusted certificate”). You can accept this certificate permanently and will not be asked about it anymore.

Next: , Previous: Latest Version, Up: General Information

1.7 Installation (from tar file)

We now discuss installation, which might happen under Unix or Microsoft Windows. First, we discuss Unix installation. See Unix installation.

For Microsoft Windows Installation please skip to the See Microsoft Windows installation.

Next: , Up: Installation

1.8 Unix installation

  1. cd to a directory where you want to install ESS, creating it if necessary. This directory will be referred to below as ESSDIR.
  2. Retrieve the latest version from ESS downloads area to ESSDIR.
  3. Decompress/unarchive the files from the disribution. 
              gunzip ess-VERSION.tar.gz
          tar xvf ess-VERSION.tar
     
              (or: gunzip < ess-VERSION.tar.gz | tar xvf - ).
          (or using GNU tar:  tar zxvf ess-VERSION.tar.gz).

    The tar command will create the subdirectory ess-VERSION and unarchive the files there.

  4. Edit the file ESSDIR/ess-VERSION/lisp/ess-site.el as explained in the comments section of that file.
  5. Add the line 
              (load "ESSDIR/ess-VERSION/lisp/ess-site")

    to your user or system installation file (GNU Emacs uses $HOME/.emacs and XEmacs uses $HOME/.xemacs/init.el for the user initialization file. GNU Emacs uses default.el or site-init.el and XEmacs uses site-start.el for the system installation file).

    Alternatively, if ess-site.el is in your current Lisp path, you can do: 

              (require 'ess-site)

    to configure emacs for ESS.

  6. That's it! If you are installing just a local copy of ESS for yourself, ESS is now ready to be used. (The remaining step below is for advanced installation.) To edit statistical programs, load the files with the requiste extensions (".sas" for SAS, ".S" for S-PLUS, ".R" for R, and ".lsp" for XLispStat). To start a statistical process within Emacs, such as R, type M-x R.
  7. (OPTIONAL) READ THIS ITEM THOROUGHLY BEFORE STARTING:

    If you want to place the compiled files in other locations edit the LISPDIR and INFODIR entries in Makeconf in the ESSDIR/ess-VERSION directory (if you are using XEmacs, then you also need to edit the EMACS entry as follows: EMACS=xemacs).

    You can compile those files by: 

              make all

    When that completes successfully, install the compiled files: 

              make install

    This will install the compiled info files and lisp files. If you are an XEmacs user, then you should be done. If not, then you may have to edit/create the file dir that is found in the directory specified by INFODIR: see the sample dir in ESSDIR/ess-VERSION/doc/info. If dir does not exist in INFODIR, then the sample dir will be installed.

    Note: ESS can be installed for XEmacs as an XEmacs package much more easily than what has been described anywhere above. However, the latest ESS version will not be available at the same time as an XEmacs package; generally, it can take weeks or months to appear in the latter format. For more information on installing ESS as an XEmacs package see Quickstart Package Guide.

Next: , Previous: Unix installation, Up: Installation

1.9 Microsoft Windows installation

For Microsoft Windows installation, please follow the next steps: (see separate instructions above for UNIX See Unix installation.

  1. cd to a directory where you keep emacs lisp files, or create a new directory (for example, c:\emacs\) to hold the distribution. This directory will be referred to below as "the ESS distribution directory". It will contain, at the end, either the tar file ess-VERSION.tar.gz or the zip file ess-VERSION.zip, and a directory for the ESS source, which will be termed "the ESS-VERSION source directory".
  2. Retrieve the compressed tar file ess-VERSION.tar.gz or the zipped file ess-VERSION.zip from one of the FTP or WWW archive sites via FTP (or HTTP). Be aware that http browsers on Windows frequently change the "." and "-" characters in filenames to other punctuation. Please change the names back to their original form.
  3. Copy ess-VERSION.tar.gz to the location where you want the ess-VERSION directory, for example to c:\emacs\ess-VERSION.tar.gz, and cd there. For example, 
              cd c:\emacs

    Extract the files from the distribution, which will unpack into a subdirectory, ess-VERSION. 

              gunzip ess-VERSION.tar.gz
          tar xvf ess-VERSION.tar
          (or: gunzip < ess-VERSION.tar.gz | tar xvf - ).
          (or: from the zip file: unzip ess-VERSION.zip)

    The tar command will extract files into the current directory.

    Do not create ess-VERSION yourself, or you will get an extra level of depth to your directory structure.

  4. Windows users will usually be able to use the `lisp/ess-site.el' as distributed. Only rarely will changes be needed.
  5. Windows users will need to make sure that the directories for the software they will be using is in the PATH environment variable. On Windows 9x, add lines similar to the following to your c:\autoexec.bat file: 
              path=%PATH%;c:\progra~1\spls2000\cmd

    On Windows NT/2000/XP, add the directories to the PATH using the My Computer/Control Panel/System/Advanced/Environment Variables menu. Note that the directory containing the program is added to the PATH, not the program itself. One such line is needed for each software program. Be sure to use the abbreviation progra~1 and not the long version with embedded blanks. Use backslashes "\".

  6. Add the line 
              (load "/PATH/ess-site")

    to your .emacs (or _emacs) file (or default.el or site-init.el, for a site-wide installation). Replace /PATH above with the value of ess-lisp-directory as defined in ess-site.el. Use forwardslashes /. (GNU Emacs uses the filename %HOME%/.emacs and XEmacs uses the filename %HOME%/.xemacs/init.el for the initialization file.)

  7. To edit statistical programs, load the files with the requisite extensions (".sas" for SAS, ".S" or "s" or "q" or "Q" for S-PLUS, ".r" or ".R" for R, and ".lsp" for XLispStat).
  8. To run statistical processes under emacs:

    To start the S-PLUS [67].x GUI from ESS under emacs: 

              M-x S
          (or M-x S+6).

    You will then be asked for a pathname ("S starting data directory?"), from which to start the process. The prompt will propose your current directory as the default. ESS will start the S-PLUS GUI. There will be slight delay during which emacs is temporarily frozen. ESS will arrange for communication with the S-PLUS GUI using the DDE protocol. Send lines or regions from the emacs buffer containing your S program (for example, myfile.s) to the S-PLUS Commands Window with the C-c C-n or C-c C-r keys. (If you are still using S-PLUS 4.x or 2000, then use M-x S+4.)

    To start an S-PLUS [67].x session inside an emacs buffer—and without the S-PLUS GUI: 

              M-x Sqpe
          (or M-x Sqpe+6).

    You will then be asked for a pathname ("S starting data directory?"), from which to start the process. The prompt will propose your current directory as the default. You get Unix-like behavior, in particular the entire transcript is available for emacs-style search commands. Send lines or regions from the emacs buffer containing your S program (for example, myfile.s) to the *S+6* buffer with the C-c C-n or C-c C-r keys. Interactive graphics are available with Sqpe by using the java library supplied with S-PLUS 6.1 and newer releases. Enter the commands: 

              library(winjava)
          java.graph()

    Graphs can be saved from the java.graph device in several formats, but not PostScript. If you need a PostScript file you will need to open a separate postscript device. (If you are still using S-PLUS 4.x or 2000, then use M-x Sqpe+4.)

    To connect to an already running S-PLUS GUI (started, for example, from the S-PLUS icon): 

              M-x S+6-existing

    You will then be asked for a pathname ("S starting data directory?"), from which to start the process. The prompt will propose your current directory as the default. ESS will arrange for communication with the already running S-PLUS GUI using the DDE protocol. Send lines or regions from the emacs buffer containing your S program (for example, myfile.s) to the S-PLUS Commands Window with the C-c C-n or C-c C-r keys. (If you are still using S-PLUS 4.x or 2000, then use M-x S+4-existing.)

    If you wish to run R, you can start it with: 

              M-x R

    XLispStat can not currently be run with 

              M-x XLS

    Hopefully, this will change. However, you can still edit with emacs, and cut and paste the results into the XLispStat *Listener* Window under Microsoft Windows.

  9. That's it!

Next: , Previous: Installation, Up: General Information

1.10 Reporting Bugs

Please send bug reports, suggestions etc. to

<A HREF="mailto:ESS-bugs@stat.math.ethz.ch"> ESS-bugs@stat.math.ethz.ch </A>

The easiest way to do this is within Emacs by typing

M-x ess-submit-bug-report

This also gives the maintainers valuable information about your installation which may help us to identify or even fix the bug.

If Emacs reports an error, backtraces can help us debug the problem. Type "M-x set-variable RET debug-on-error RET t RET". Then run the command that causes the error and you should see a *Backtrace* buffer containing debug information; send us that buffer.

Note that comments, suggestions, words of praise and large cash donations are also more than welcome.

Next: , Previous: Reporting Bugs, Up: General Information

1.11 Mailing Lists

There is a mailing list for discussions and announcements relating to ESS. Join the list by sending an e-mail with "subscribe ess-help" (or "help") in the body to ess-help-request@stat.math.ethz.ch; contributions to the list may be mailed to ess-help@stat.math.ethz.ch. Rest assured, this is a fairly low-volume mailing list.

The purposes of the mailing list include

Previous: Mailing Lists, Up: General Information

1.12 Authors

Footnotes

[1] require the files.el patch to revert-buffer for the Local Variables updating problem